3
TYP DESCRIPTION PAGE
SAT Parabolic Offset Reflectors 4
MFH Special LNB-Mount 5
UC LNB’s with Coaxial Outputs 5
NV SAT-IF Inline Amplifier 6
ESW SAT-IF Insertion Diplexer 7
NG/NT Universal Plug-In Power Supply 7
SO Optical LNB System 8
SO LNB Optical LNB 9
SO MDU Optical Back Converter 9
SO 3.0 Fibre Cable 10
SO VPro Optical Splitter 10
SO ASS Asymmetrical Optical Splitter 11
SO OA Optical Accessories 11
SAT ZF SAT-IF Distribution Systems 12
NVS Amplifier 5-Cable System 13
MSEB Quick Grounding Blocks 13
MSE-N Multiswitch 5-Cable System, Single Switch 14
NVS Amplifier 9-Cable Cascadable System 15
MSE-K Multiswitch 9-Cable-Cascadable System 15
MSE-N Multiswitch 9-Cable System, Single Switch 16
NVS Amplifier 17-Cable-Cascadable System 17
MS-K Multiswitch 17-Cable Cascadable System 17
MS-N Multiswitch 17-Cable System, Single Switch 18
MSU UniComb Multiswitch Systems 19
SUM Unicable Single Switch 21
TEA Terrestrial Antennas 22
MBV Terrestrial Multiband Amplifier 23
SVD/KBD Splitband Amplifier Terrestrial + SAT-IF 24
KAB Headend KAB 25
KAB Headend KAB Plug-In Modules 26
2
4 3
PARABOLIC OFFSET REFLECTORS
HJ For reception of satellite signals in the frequency range 10.7–12.75 GHz
HJ Simple setup on site – only 2 completely pre-assembled partsHJ High stability – 40 mm die-cast feed mount (part of shipment)
and solid screw connection of reflector with mounting bracketHJ Corrosion-resistant – Aluminium reflector, hot-dip galvanized
mast bracketHJ Appealing design • available in three colors: white, graphite, brick red • integrated cable duct • Back bracket in reflector color
Always ready for operation
ll Heatable offset reflector with automatic regulationll Humidity and rain sensor for efficient heatingll SATH 100 with pre-mounted heating pad (further sizes on request)
High stability
HJ Generous material profiles and hexagonal clamping nuts
HJ One-piece construction of support arm and LNB mount
Protected cable duct
HJ Secure and orderly cabling on support arm
Color / Article-No. white
graphite
brick red
Reflector-Ø m
Gain dB
Half-value aperture O
Mount for mast Ø mm
Adjustment range, elevation O
Wind load N
Width x height cm
Packing dimensions cm
Weight kg
Type5700 1277
5700 1278
5700 1279
0.75
37.3
2.4
40 - 80
10 - 40
480
75 x 80
76 x 86 x 20
7.0
SAT 755700 1280
5700 1281
5700 1282
0.85
38.3
2.1
40 - 80
10 - 40
600
85 x 90
90 x 86 x 20
11.0
SAT 855700 1283
5700 1284
5700 1285
1.0
40
1.8
40 - 80
10 - 40
800
94 x 101
116 x 102 x 25
11.5
SAT 1005700 0877
5700 1050 / 2653
–
1.2
41.0 ... 42.5
1.37
55 - 100
20 - 50
1250
124 x 133
100 x 120 x 24
14.5 / 21.9
SAT 120 / 120 PRO SATH 100
5700 2075
5700 2072
5700 2074
1.0
40
1.8
40 - 80
10 - 40
800
94 x 101
100 x 115 x 25
11.5
5
SATE
LLIT
E-TV
4
SPECIAL LNB-MOUNT
LNB’S WITH COAXIAL OUTPUTS
HJ Rail system with additional feed adaptors Ø 40 mm for simultaneous reception of up to 4 satellites: Min. angle distances: SAT 75 / SAT 85: 6º SAT 100: 4º SAT 120: 3º
HJ Easy mounting on all DELTA Electronics reflectors
HJ Low Noise Block Converter for conversion of TV SAT transponders into the SAT-IF range (L-Band)
HJ Waterproof die-cast housing and additional protection by outer plastic housing
HJ Suitable for all standard feed mounts of 40 mm ØHJ Low power consumptionHJ Low noise and low distortion
Description
Article-No.
LNB fittings
Provided LNB fittings
Shift range º
Weight kg
Type
Multifeed mount
5700 1191
2
1
6
0.2
MFH 2
Multifeed mount
5700 1192
3
2
25
0.4
MFH 3
Multifeed mount
5700 1193
4
3
25
0.5
MFH 4
MFH 4MFH 2
Type
Single-LNB
5700 0881
10.70 - 11.7011.70 - 12.75
> 50
9.75 low
10.60 high
25
14/18
0/22
130
40
-40...+60
0.38
UC 21
Twin-LNB
5700 0883
10.70 - 11.7011.70 - 12.75
> 50
9.75 low
10.60 high
25
2 x 14/18
2 x 0/22
235
40
-40...+60
0.45
UC 22
Quattro-LNB
5700 0885
10.70 - 11.7011.70 - 12.75
> 50
9.75 low
10.60 high
25
12...18
–
280
40
-40...+60
0.47
UC 44
Quattro-Switch-LNB
5700 0886
10.70 - 11.7011.70 - 12.75
> 50
9.75 low
10.60 high
25
4 x 14/18
4 x 0/22
280
40
-40...+60
0.47
UC 44 S
DescriptionArticle-No.
Frequency range low-band GHz
Frequenzbereich high-band GHz
Gain dB
Oscillator frequency GHz
Polarization decoupling dB
Switching voltage (H/V) VDC
Band switching signals kHz
Current consumption mA
Feed fitting mm
Operating temperature OC
Weight kg
UCH 44
Quattro-LNB beheizbar
5700 2196
10.70 - 11.7011.70 - 12.75
> 50
9.75 low
10.60 high
25
–
40
-40...+60
0.39
6
UCP 24
5
HJ Super wideband amplifier for terrestrial and SAT rangeHJ Frequency range 47 up to 2300 MHzHJ Remote feeding via coaxial RF connectorHJ DC-pass for LNB remote feedingHJ Die-cast enclosure Class A
SAT-IF INLINE AMPLIFIER
Type NV 1624 D
Article-No.
Frequency range MHz
Inputs
Outputs
Gain 40 MHz dB
Gain 950 / 1750 / 2300 MHz dB
Output level: SAT 35 dB IMA3 dBµV
TERR 60 dB IMA3 dBµV
Remote feeding voltage V
Remote feeding current A
Power consumption mA
Dimensions mm
Weight kg
5700 2025
47 - 2300
1 (F)
1 (F)
16
18 / 20 / 24
110
105
11 ... 20 (bi-directional)
max. 0.5
60
45 x 24 x 24
0.04
UNICABLE LNB
DescriptionArticle-No.
Power consumption W
Power supply V
Type
UCP 24Unicable LNB
5700 2894
4.75
10-22
HJ Programmable configuration (bandwidth of each UB, frequency of UB cen-ter, output signal level of UB, etc.)
HJ Up to 24 user-bands (number of UB’s programmed from 1 to 24)HJ Software update over coaxial cable HJ Programming by any DiSEqC compatible device (STB, DiSEqC terminal, etc.) HJ Controlled using EN50494 or EN50607 standard
Type
7
SATE
LLIT
E-TV
SAT 1 T SAT 2 SAT T SATSAT SAT
6
SAT-IF INSERTION DIPLEXER
HJ To combine or separate terrestrial/CATV- and SAT-IF signalsHJ Metal housing with plastic side brackets
HJ ESW 54 A: For Quattro-Switch-LNBHJ Active combiner with low through lossHJ Terrestrial active/passive switchableHJ Passive return path from 5 MHzHJ Socket jack for optional continuous feeding with power supply
NG 1880-2 (please order separately)
Type ESW 22 ESW 54 A
Article-No.
Frequency range MHz
Inputs
Outputs
Insertion loss (Ter active) dB
Insertiion loss (Ter passive) dB
Output level 60 dB IMA3 dBµV
Isolation SAT/TER dB
Power supply
Power Passing
Power consumption mA
Connectors
Dimensions mm
Weight kg
950-2150
2
5-862
1
950-2150
4
4 ... 6
4 ... 6
max. 500 mA
47-862
1
4 ... 6
12 ... 14
88
5700 2777
2
3 ... 5
> 30
by Receiver
max. 1A
F female
75 x 58 x 16
0.075
5700 2817
4
by Receiver or through external power supply
< 50 (12...18 VDC)
F female
110 x 90 x 35
0.3
UNIVERSAL PLUG-IN POWER SUPPLY
NG 1880-2:HJ Energy-efficient plug-in power supply 18 V/0,8 AHJ For Unicable SUM 516 K, SUM 518 K, SUM 524 K and SAT-IF insertion diplexer ESW 54 A
NG 1520 S:HJ Power Supply Unit 15 V/2,4 AHJ For amplifier NVS 917, NVS 1717 and Multiswitch MS 17xx N, MS 17xx KMSU NT:ll Power Supply Unit for MSU P and NVS 510 DC amplifier
Type NG 1880-2 NG 1520 S
Article-No.
Operating voltage 50/60 Hz V~
Output voltage V
Output current max mA
Connectors
Dimensions mm
Weight kg
5700 1822
230 / flange mounted Euro plug
18 / stabilized
800
3.5 mm jack
70 x 30 x 50
0.16
5700 1292
100 … 240 / Euro plug
15 / stabilized
2.400
F female + patch cable
120 x 60 x 35
0.4
5700 2173
100 … 240 / Euro plug
15
2.400
barrel plug
180 x 120 x 45
0.35
MSU NT
8 7
OPTICAL LNB-SYSTEM
The SystemAll four SAT-IF ranges of a satellite position are converted into a fre-quency multiplex in the SO LNB and transmitted over a monomode glass fibre (optical fibre) using a 1310nm laser signal. On the subscriber side the back conversion to the normal SAT-IF position is made by a MDU converter with optical input. Preconfigured fibre optic cables and connector-compatible optical splitters complete the „Plug & Play“ sys-tem. The maximum bridgeable optical budget of 19 dB enables optical distribution on up to 32 optical converters.
Adequate planning is recommended prior to installation e.g. by the DELTA planning office.
The advantages at a glanceHJ Large transmission lengths as well as high splitting factors possibleHJ Cost effective, as only one fibre and only one splitter is
required for all four SAT-IF ranges of a satellite positionHJ Space-saving installationHJ The galvanic separation due to the fibre optic wiring avoids
potential losses and EMV problemsHJ As a SAT-IF feed recommended for:
• Multiswitches of the MS/MSE series • UniComb Multiswitch MSU • Unicable SAT Channel Router SUM
HJ Further fibre optic network components for the construction of larger systems on request
SO Quattro MDU
Multiswitch SO 4OVPro
SO 3OVPro
SO 4OVPro
coaxial cable
fibre optic
SO Quad MDU
SO Twin MDU
SO Twin MDU
SO Twin MDU
SO Quad MDU
SO Quad MDU
SO Quad MDU
SO 3.0,3
SO LNB
HJ as SAT IF feed for coaxial multiswitch systems
HJ as FTTH (Fibre To The Home) with integrated multiswitch
9
SATE
LLIT
E-TV
8
OPTICAL LNB
OPTICAL BACK CONVERTER
HJ Conversion of the 4 SAT-IF levels of a satellite position to one single frequency-multiplex (stacking)
HJ Conversion of the electrical multiplex signal into an optical out-put signal for fibre optical transmission
ll SO LNB for 32-times distributionll SO LNB MK2 for 64-times distribution
HJ The back converter (De-Stacker) changes the optical signal from the SO LNB first as an electrical frequency multiplex signal and then sets it back into four original separate SAT-IF ranges
HJ With twin and quad converters a multi-switch is already integrated. The receivers can be directly connected via the antenna outlet sockets. The operating voltage for the MDU is provided via the receiver
HJ In the case of Quattro converters, which are used for the control of downstream coaxial multi-switches, the power supplier is additio-nally required to be connected (included in the delivery)
(NT 20-1200; Art.No. 57002140).
0.95-5.45
-15 to 0 dBmW / 1100 to 1650 mm
FC/PC
47-862 / 950-2150
~70
4 x F-Type
109 x 136 x 50
Optical Quad Converter
5700 2113
Optical Quattro Converter
5700 2114
0.95-5.45
-15 bis 0 dBmW / 1100 bis 1650 mm
FC/PC
47-862 / 950-2150
~70
5 x F-Type
109 x 136 x 50
Type SO Quad MK2 SO Quattro MK2
Description
Article-No.
Input frequency GHz
Optical input level dBm
Optical input
RF output frequency range MHz
RF output level dBµV
RF connectors
Dimensions mm
Type
LNB with optical output
5700 1824
9.75
7.30
0.5
10.70-12.75
0.95-1.95
1.95-3.00
3.40-4.40
4.40-5.45
1310
7.0
FC/PC
12 V by F connector plug
(external PSU included in delivery)
40
SO LNB
Description
Article-No.
L.O. frequency vertical GHz
L.O. frequency horizontal GHz
Noise figure dB
Input frequency GHz
Frequency range VL GHz Frequency range VH GHz
Frequency range HL GHz
Frequency range HH GHz
Optical wavelength nm
Optical output dBm
Fibre connector
Operating voltage
Feed fitting mm
SO LNB N
Fibre IRS Wholeband LNB
5700 2320
9.75
7.30
0.7
10.70-12.75
0.95-1.95
1.95-3.00
3.40-4.40
4.40-5.45
1310
7.0 bis 8.0
-
6 V by N-Type-Cable at
connected unit
40
LNB with optical output
5700 2375
9.75
7.30
0.5
10.70-12.75
0.95-1.95
1.95-3.00
3.40-4.40
4.40-5.45
1310
7.0 bis 8.0
FC/PC
12 V by F connector plug
(external PSU included in delivery)
40
SO LNB MK 2
10
Description
Article-No.
Outputs
Optical wavelength nm
Through loss dB
Optical Input/Output
Description
Article-No.
Outputs
Optical wavelength nm
Through loss dB
Optical Input/Output
Description
Article-No.
Outputs
Optical wavelength nm
Through loss dB
Optical Input/Output
SO SPLITTER 8-WAY SC SO SPLITTER 16-WAY FC SO SPLITTER 32-WAY FC
9
FIBRE CABLE
OPTICAL SPLITTER
HJ Monomode fibreglass cable, PVC coated, in various lengths, Ø 3.0 mm
HJ The cables are already prefconfigured on both ends with FC/PC connectors
HJ LSHZ (smoke resistant and halogen-free)
ll The optical splitter distributes the optical signal proportionally to 2, 3, 4 or 8 outputs
Type
opt. two way distributor
5700 1825
2
1310/1550
3.8
FC/PC
SO 2OVPro
opt. three way distributor
5700 1826
3
1310/1550
5.5
FC/PC
SO 3OVPro
opt. four way distributor
5700 1827
4
1310/1550
6.8
FC/PC
SO 4OVPro
opt. eight way distributor
5700 1828
8
1310/1550
8.5
FC/PC
SO 8OVPro
Description
Article-No.
Outputs
Optical wavelength nm
Through loss dB
Optical Input/Output
5700 1838
3
5700 2023
1
5700 1839
10
5700 2651
15
5700 2024
30
5700 1841
50
5700 1842
75
5700 1843
100
5700 1844
200
Type SO 3.0,3SO 3.0,1 SO 3.0,10 SO 3.0,15
SO 3.0,30 SO 3.0,50 SO 3.0,75 SO 3.0,100 SO 3.0,200
Article-No.
Length m
SO 3.0,5005700 2176
500
Article-No.
Length m
SO 3.0,5
5700 2090
5
SO 3.0,25700 2089
2
Type
SO 3.0,205700 1840
20
SO 3.0,405700 2652
40
Type SO SPLITTER 2-WAY FC SO SPLITTER 2-WAY SC SO SPLITTER 3-WAY FC
SO SPLITTER 4-WAY FC SO SPLITTER 4-WAY SC SO SPLITTER 8-WAY FC
opt. two way distributor
5700 2316
2
1310/1550
3.2
FC/PC
opt. two way distributor
5700 2198
2
1310/1550
3.2
SC/APC
opt. three way distributor
5700 2317
3
1310/1550
FC/PC
opt. four way distributor
5700 2318
4
1310/1550
6.2
FC/PC
opt. four way distributor
5700 2199
4
1310/1550
6.2
SC/APC
opt. eight way distributor
5700 2319
8
1310/1550
9.2
FC/PC
opt. eight way distributor
5700 2200
8
1310/1550
9.2
SC/APC
opt. 16-way distributor
5700 2311
16
1310/1550
12.2
FC/PC
opt. 32-way distributor
5700 2312
32
1310/1550
15.3
FC/PC
ll The following optical splitters are available in a sturdy sheet metal case
Type
Type
11
SATE
LLIT
E-TV
OPTICAL ACCESSORIES
HJ Optical attenuator: Ensures that the optical attenuation from the output of the LNB to the input of the converter is maintained at 15 dB
HJ Optical cable connector: FC/PC socket on both sides HJ Fibreglass rod as insertion tool for fibre optic cables in empty tubes
Opt. Attenuator 5 dB
5700 1833
Opt. Attenuator 10 dB
5700 1834
Opt. Attenuator 15 dB
5700 1835
Adapter FC/PC – FC/PC
5700 1832
Fiberglass rod (insertion tool)
5700 1836
Type SO OA 5 SO OA 10 SO OA 15 SO FC/PC BC
SO EZH
Description
Article-No.
SO NT Fibre LNB12 V PSU for Fibre LNB 40mm
5700 2374
Power plug for SO Quad MK2
5700 2140
NT 20-1200Type
Description
Article-No.
ll Asymmetrical optical splitter FC/PC
10
ASYMMETRICAL OPTICAL SPLITTER
Description
Article-No.
Optical wavelength nm
Through loss port 1 dB
Through loss port 2/3 dB
Optical Input/Output
SO ASS 1-2 60:40asymm. opt. splitter 1-2
5700 2332
1310/1550
2.4
4.2
FC/PC
asymm. opt. splitter 1-2
5700 2133
1310/1550
1.8
5.5
FC/PC
asymm. opt. splitter 1-2
5700 2134
1310/1550
1.5
6.2
FC/PC
Type SO ASS 1-2 70:30 SO ASS 1-2 75:25 SO ASS 1-2 80:20asymm. opt. splitter 1-2
5700 2135
1310/1550
1.2
7.2
FC/PC
Description
Article-No.
Optical wavelength nm
Through loss port 1 dB
Through loss port 2/3 dB
Optical Input/Output
SO ASS 1-2 85:15asymm. opt. splitter 1-2
5700 2136
1310/1550
0.9
8.4
FC/PC
asymm. opt. splitter 1-2
5700 2331
1310/1550
0.7
10.2
FC/PC
asymm. opt. splitter 1-2
5700 2137
1310/1550
0.4
13.2
FC/PC
Type SO ASS 1-2 90:10 SO ASS 1-2 95:05 SO ASS 1-3 45:40:15asymm. opt. splitter 1-3
5700 2336
1310/1550
3.7
4.2 / 8.4
FC/PC
Description
Article-No.
Optical wavelength nm
Through loss port 1 dB
Through loss port 2/3 dB
Optical Input/Output
SO ASS 1-3 55:40:05asymm. opt. splitter 1-3
5700 2139
1310/1550
2.8
4.2 / 13.2
FC/PC
asymm. opt. splitter 1-3
5700 2138
1310/1550
2.4
7.2 / 7.2
FC/PC
asymm. opt. splitter 1-3
5700 2125
1310/1550
1.2
10.2 / 10.2
FC/PC
Type SO ASS 1-3 60:20:20 SO ASS 1-3 80:10:10 SO ASS 1-4asymm. opt. splitter 1-4
5700 2126
1310/1550
FC/PC
12
Product family Series Trunk lines / inputs Switch control Cabling structure
Multiswitch Ecoline – Multiswitch DiSEqC-controlled
MS/MSE 5, 9, 1713/18 V; 0/22 kHz;
DiSEqCFull star network
UniComb Multiswitch – Combination of DiSEqC-Multiswitches and Unicable SAT CR
MSU 5, 9, 17programmable
Unicable; 13/18 V; 0/22 kHz; DiSEqC
Floor star network; single branch line in flat
(tree network)
Unicable-Switch – Unicable SAT CR according to EN 50494
SUM
9 5
Unicable
Tree network up to 8 subcribers/Sat tuners on one single
cable trunk line
11
SAT-IF DISTRIBUTION SYSTEMS
The crucial advantage of the direct satellite reception is the almost un-limited programme variety, which is available for the user over various satellite positions. By a single coaxial cable, however, only a fraction of over 30 transponders are transmittable directly to the Sat Receiver in the SAT-IF range of 950-2150 MHz.
However, in order to allow each receiver in SAT multi-subscriber sys-tems access to the range of programmes and accordingly to the SAT-IF levels, mostly terminal-controlled multiswitches are used. For systems in which the use of multiswitches is not possible due to wiring technology Delta Electronics has developed the programmable SAT-IF conversion SatTransSelect. This active SAT-IF distribution system is offered by Delta Electronics in differentiated product families:
13
SATE
LLIT
E-TV
12
ll NVS 510 DC: Head- or backbone line amplifier for 5-cable systems, terrestrial path active
HJ Power supply unit MSU NT optionally connectable (to be ordered separately)
HJ SV 528: Head amplifier for 5-cable systemsHJ Terrestrial active/passive switchableHJ Attenuator, 22 kHz generator for Quad LNB
HJ Easy connection of the multi-switch with the subscriber linesHJ Ensures permanent potential equalization in according to
the safety standard EN 60728-11HJ High quality F-Quick connectorHJ Grid 25 mm
AMPLIFIER 5-CABLE SYSTEM
QUICK GROUNDING BARS
V H T V H
SAT 1 SAT 2
DC
V
SAT 1 SAT 2
H T V H
=
~
Type NVS 510 DC SV 528
5700 2315
head or backbone amplifier
> 25
-
9 - 20 V=
power supply with barrel plug (Art.5700 2173)
12 VDC 500 mA
4.2 W
F female
115 x 104 x 33
0.3
1016 1201
head amplifier
> 25
selectable
185 - 265 V~
flanch mounted power supply unit
13/18 VDC 500 mA,
11.7 W
F female
210 x 125 x 73
1.2
Article-No.
Description
Frequency range MHz
Inputs
Outputs
Gain: active-mode dB
passive-mode dB
Attenuator dB
Output level
SAT 35 dB IMA3 dBµV
TERR 60 dB IMA3 /IMA
2 dBµV
Isolation inputs dB
22 kHz tone
Operating voltage for LNB and NVS 510
Remote feeding LNB
Power consumption
Connectors
Dimensions mm
Weight kg
950 - 2150
4
4
10 ... 15
-
fixed slope
-
113
47 - 862
1
1
10 ... 15
-
fixed slope
-
109
47 - 862
5
26 ... 28
-1 ... -3
114 / 95
5 - 30
1
-1 ... -3
-1 ... -3
950 - 2150
4
21 ... 28
21 ... 28
4 x 0...15
9
116
1 x 0...15
Article-No.
MS-Type
Type MSEB 08 (1x8)
5700 0928
MSE 5012 N, 9012 N, 5048 N
MSEB 12 (1x12)
5700 0927
MSE 58 N, 98 N, 9016 N, 5016 N, 5032 N (MS 54 N, MSE 56 N, 94 N, 96 N with overlap)
14 13
Stand alone switch with power supply for 6-48 subscribers
HJ For selection of 4 satellite polarities from all of the connected SAT receiversHJ Input switching via control with 13/18 V, 0/22 kHz from the receiverHJ 22 kHz and 13/18V - Overlay with connection for Quad Switch LNBHJ Input for terrestrial and CATV signals, available as a return path in passive
operationHJ Active switch for terrestrial range with low tap lossHJ Connectors: F femaleHJ Metal housing with plastic side bracketsHJ Switch mode power supply with LED-controlHJ Temperature range -20°C...55°C
MULTISWITCHES 5-CABLE SYSTEM
5700 1788
6
25
28
230
max. 600
4.0/5.0
345 x 120 x 80
1.3
5700 1789
8
25
28
230
max. 600
4.0/5.0
345 x 120 x 80
1.3
5700 1790
12
22
22
230
max. 600
4.0/7.0
440 x 120 x 80
1.4
Type MSE 56 N MSE 58 N MSE 5012 N
Article-No.
Frequency range TER passive/active MHz
Inputs
Outputs Receiver
Gain TER passive/active dB
Isolation: TER/SAT dB
SAT/TER dB
Rec/Rec dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Operating voltage V~
Remote feeding LNB mA
Power consumption* TER passive/active W
Dimensions mm
Weight kg
950-2150
4
-7
30
101
5/47-862
1
-22/1
28
85
950-2150
4
-7
30
101
5/47-862
1
-23/1
28
85
950-2150
4
-8
30
100
5/47-862
1
-27/2
28
85
*without LNB remote feeding
Type MSE 5016 N MSE 5024 N MSE 5032 N MSE 5048 N
Article-No.
Frequency range TER passive/active MHz
Inputs
Outputs Receiver
Gain TER passive/active dB
Isolation: TER/SAT dB
SAT/TER dB
Rec/Rec dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Operating voltage V~
Remote feeding LNB mA
Power consumption* TER passive/active W
Dimensions mm
Weight kg
950-2150
4
-4
30
100
5/47-862
1
-29/2
28
85
950-2150
4
-2
30
95
5/47-862
1
-33/0
28
86
950-2150
4
-1
30
95
5/47-862
1
-33/-1
28
86
950-2150
4
-2
30
95
5/47-862
1
-37/-3
28
86
*without LNB remote feeding
5700 1791
16
22
25
230
max. 600
4,0/7,0
530 x 120 x 80
1,6
5700 1792
24
25
25
230
max. 600
4,0/7,0
440 x 120 x 80
1,6
5700 1793
32
25
25
185 - 265
max. 600
2.0/5.0
384 x 120 x 71
1.4
5700 1794
48
25
25
185 - 265
max. 600
2.0/5.0
484 x 120 x 71
1.7
15
SATE
LLIT
E-TV
14
HJ For selection of 8 satellite polarities signals in cascadeHJ Switching mode 13/18 V, 0/22 kHz, DiSEqC 2.0HJ Terrestrial/CATV path passive and available as return pathHJ Connectors F femaleHJ Metal housing with plastic side bracketsHJ Remote feed from the connected receiversHJ Temperature range -20°C...55°C
MULTISWITCH 9-CABLE CASCADABLE SYSTEM
HJ Applicable as head- or cascade amplifier. Powering by a plug-in power supply, included in the deliveryHJ Attenuator per input, fixed slope in SAT rangeHJ High degree of controllability
AMPLIFIER 9-CABLE CASCADABLE SYSTEM
Type NVS 917
Article-No.
Frequency range MHz
Inputs
Outputs trunkline
Gain dB
Attenuator dB
Equalizer dB
Noise figure dB
Isolation: SAT/SAT dB
SAT/TER dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Plug-in power supply
Power consumption mA
Dimensions mm
Weight kg
950-2150
8
8
14 ... 24
0 ... 20
10
9
> 30
110
47-862
1
1
17
0 ... 20
2 ... 15
7
105
1016 1638
> 20
230 V~ / 18 V, 1200 mA (Cinch connector), Type NG 1520 S
max. 400 (without LNB remote feeding)
287 x 124 x 51
1.1
Type MSE 98 K
Article-No.
Frequency range
MHz
Inputs
Outputs receiver
Outputs trunkline
Gain output subscriber* dB
Through loss trunkline dB
Isolation: SAT/SAT dB
SAT/TER dB
Rec/Rec dB
Output level: 35 dB IMA3 dBµV
Remote feeding SAT trunkline mA
Power consumption receiver mA
Weight
950-2150
8
8
-2.5...+4
3
35
30
100
5-862
1
1
-26
5
28
MSE 9016 K5700 2662
24
28
max. 800
< 65
287 x 316 x 51
1.4
*6 dB Slope
5700 1801
8
28
max. 800
< 65
287 x 153 x 51
0.76
5-862
1
1
-30
6
28
950-2150
8
8
-3... +3
6
35
30
100
5700 1802
16
28
max. 800
< 65
287 x 210 x 51
1.0
5 - 862
1
1
-33
6
950-2150
8
8
-3...+6
6
35
100
MSE 9024 K
16 15
MULTISWITCH 9-CABLE SYSTEM
Stand alone switch with power supply for 4-16 subscribers
HJ For selection of 9 satellite polarities from all of the connected SAT receiversHJ Input switching via the receiver with 13/18 V, 0/22 kHz; DiSEqC 2.0 HJ 22 kHz and 13/18V - Overlay with connection for Quad Switch LNBHJ Input for terrestrial and CATV signals, available as a return path in
passive operationHJ Active switch for terrestrial range with minimal tap lossHJ Connectors F femaleHJ Metal housing with plastic side bracketsHJ Switch mode power supply with LED-controlHJ Temperature range -20°C...55°Cll Suitable to end a 9-cable cascade
Type
5700 1798
12
30
28
230
max. 800
7.5/10.5
440 x 120 x 80
1.8
MSE 9012 N
5700 1799
16
30
28
230
max. 800
7.5/10.5
550 x 120 x 80
2.1
MSE 9016 N
Article-No.
Frequency range TER passive/active MHz
Inputs
Outputs Receiver
Gain TER passive/active dB
Isolation: TER/SAT dB
SAT/TER dB
Rec/Rec dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Operating voltage V~
Remote feeding LNB mA
Power consumption* TER passive/active W
Dimensions mm
Weight kg
950-2150
8
0
30
100
5/47-862
1
-32/2
30
82
950-2150
8
0
30
100
5/47-862
1
-33/0
30
82
*without LNB remote feeding
Type MSE 94 N MSE 96 N MSE 98 N
Article-No.
Frequency range TER passive/active MHz
Inputs
Outputs Receiver
Gain TER passive/active dB
Isolation: TER/SAT dB
SAT/TER dB
Rec/Rec dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Operating voltage V~
Remote feeding LNB mA
Power consumption* TER passive/active W
Dimensions mm
Weight kg
*without LNB remote feeding
5700 1795
4
30
28
230
max. 800
7.5/8.5
345 x 120 x 80
1.6
5700 1796
6
30
28
230
max. 800
7.5/8.5
345 x 120 x 80
1.6
5700 1797
8
30
28
230
max. 800
7.5/8.5
345 x 120 x 80
1.6
5/47-862
1
-26/0
30
82
950-2150
8
0
30
100
5/47-862
1
-27/-1
30
82
950-2150
8
0
30
100
5/47-862
1
-28/-2
30
82
950-2150
8
0
30
100
17
SATE
LLIT
E-TV
16
AMPLIFIER 17-CABLE CASCADABLE SYSTEM
HJ Usable as head- or cascade amplifier. Powering by plug-in power supply, contained in the delivery
HJ Attenuator at each input, fixed slope in SAT rangeHJ High degree of controllability
Type NVS 1717
Article-No.
Frequency range MHz
Inputs
Outputs subscriber
Gain dB
Attenuator dB
Equalizer dB
Noise figure dB
Isolation: SAT/SAT dB
SAT/TER dB
Output level: 35 dB IMA3 dBµV
60 dB IMA3 dBµV
Plug-in power supply with F connector V~
Remote feeding W
Dimensions / Weight mm/kg
950-2150
16
16
14 ... 20
0 ... 10
6
9
> 25
110
1
1
0 ... 10
0 ... 10
7
> 30
105
5700 1262
230 V~ / 15 V, 2 A (Remote feeding LNB max. 1.2 A), Type NG 1520 S
12 (without LNB remote feeding)
370 x 105 x 55 / 2.8
5-65
4
88-862
16
MULTISWITCH 17-CABLE CASCADABLE SYSTEM
HJ For selection of 16 satellite polarities + terrestrial signalsHJ Switching mode 13/18 V, 0/22 kHz, DiSEqC-signals and toneburstHJ LED for signalisation of power supplyHJ Metal housing with plastic side brackets, connectors F femaleHJ Remote feed from the connected receiversll DC input by F female connector max. 18V / 2A
Type MS 1704 K MS 1708 K MS 1716 K
Article-No.
Frequency range MHz
Inputs
Outputs subscriber
Outputs trunkline
Gain dB
Through loss trunkline dB
Isolation: SAT/SAT dB
SAT/TER dB
Subscriber dB
Output level: 35 dB IMA3 dBµV
Remote feeding mA
Power consumption max. (by receiver) mA
Dimensions mm
Weight kg
950-2150
16
0
3.5
> 30
> 30
100
5-862
1
-22
4
> 25
5700 1259
8
17
> 30
max. 1300
< 50
370 x 105 x 55
1.8
5700 1260
16
17
> 30
max. 1300
< 50
370 x 205 x 55
2.8
5700 1261
4
17
> 30
max. 1300
< 50
370 x 105 x 55
1.8
950-2150
16
0
3.5
> 30
> 30
100
5-862
1
-24
4
> 25
950-2150
16
2
5
> 30
> 30
100
5-862
1
-27
4
> 25
18
Multiswitch MS 1716 N
Multiswitch MS 1708 K
Multiswitch MS 1708 K
Amplifier NVS 1717
Multiswitch MS 1708 K
Amplifier NVS 1717
Multiswitch MS 1716 K
SAT LNB
SAT LNB
SAT LNBSAT
LNBSAT LNB
Plug-in power supply NG 1520 S
Plug-in power supply NG 1520 S
Plug-in power supply NG 1520 S
17
FR 75 DC
MULTISWITCH 17-CABLE SYSTEM
Stand alone switch with power supply
HJ For selection of 16 satellite polarities from all of the connected SAT receivers
HJ Switching mode 13/18 V, 0/22 kHz, DiSEqC 2.0HJ Input for terrestrial or CATV signals, passive and return path compatible HJ Metal housing with plastic side brackets, connectors F femaleHJ Energy-saving remote feed via the SAT receiver, plug-in power supply
NG 1520 S with F connector for LNB-remote feeding, included in the delivery
ll Suitable to end a cascade
Article-No.
Frequency range MHz
Inputs
Outputs subscriber
Gain dB
Isolation: SAT/SAT dB
SAT/TER dB
Subscriber dB
Output level: 35 dB IMA3 dBµV
Plug-in power supply with F connector V~
Remote feeding LNB
Power consumption max. (by receiver) mA
Dimensions / Weight mm/kg
950-2150
16
0
> 30
> 30
100
5-862
1
-18
> 25
5700 1257
8
> 30
230 / 15 V, 2 A
max. 1.3 A
über Steckernetzteil
< 50
370 x 105 x 55 / 1.8
5700 1258
16
> 30
230 / 15 V, 2 A
max. 1.3 A
über Steckernetzteil
< 50
360 x 205 x 55 / 2.8
HJ Distribution network for 16 subscribers with a stand alone switch HJ Cascade system for up to 40 subscribers
5700 1265
4
> 30
230 / 15 V, 2 A
max. 1.3 A
über Steckernetzteil
< 50
370 x 105 x 55 / 1.8
950-2150
16
0
> 30
> 30
100
5-862
1
-22
> 25
950-2150
16
0
> 30
> 30
100
5-862
1
-24
> 25
Type MS 1704 N MS 1708 N MS 1716 N
19
SATE
LLIT
E-TV
18
UniComb MULTISWITCH-SYSTEMS
ll Largest program variety up to four satellite positions with 16 SAT-IF levels able to be fed in, suitable for DVB-S/S2 (SD, HD, Pay-TV)
ll Lowest Installation costs extremely compact and able to connect up to three subscriber connections in feed-through technology on one user line
ll Independent operating conditions for subscribers • Operation of up to three SAT receivers in Unicable mode or • one SAT receiver in DiSEqC mode (legacy) per line • In a 17-cable system: two of four SAT positions are connectable per subscriber line for Unicable operation
HJ Additional feed of DVB-T, fast cable internet and/or cable TV supply via passive input/return path
HJ Excellent "Made in Germany" product quality, suitable also for large SAT-IF systems with cascading
HJ Energy efficient due to receiver remote feed and LNB standby switching
HJ A power pack is required for the LNB-remote feeding only in cascading switches without trunkline amplifiers. Recommended: MSNT 19-2, 19V/2A with F connector. Can be connected at any MSU switch in the cascading switch
ll EN 50607 prepared
The most flexible solution for the conversion of multi-subscriber systems to SAT direct reception
MultiswitchMBV 40-3
UniComb MultiswitchMSU 178 P
UniComb MultiswitchMSU 58 P
UniComb MultiswitchMSU 54 P
Optical Distributor
SO
BK/CATV, Internet
SAT Unicable + Fast Internet SAT Unicable
SAT DISEqC + Fast Internet + Cable TV
SAT DISEqC + Fast Internet
SAT DISEqC + Terr.
SAT DISEqC
SAT Unicable
SAT Unicable + Terr.
coaxial cable
fibre optics
Optical Converter
SO
DVB-TFM
Hispa SAT
Türk SAT
Astra 19° Hotbird
13°
SAT LNB
HJ Example: SAT receiver system with fibreglass distribution for multiple buildings or apartment-houses
HJ Example: four satellite receiver systems with MSU 178 P
20 19
The intelligent single cable solution operates according to the channel-rou-ter principle. Here, a single satellite transponder is transferred to a specific receiver. The satellite transponder is also routed to the receiver.A specific transponder frequency, with all comprising programs is filtered out and converted to the SCR-transponder frequency. This signal is then allocated uniquely to a respective receiver. Each subscriber decides independently which satellite transponder must be converted to his own transponder frequency. The receiver selects and decodes the selected TV program from the transport stream of the trans-ponder.
Principle of function
UniComb MULTISWITCH FOR 5, 9- AND 17-CABLE SYSTEMS
HJ Each subscriber output level is separately maintained constant (AGC)
HJ Each subscriber output holds three SCR transport frequencies for independent Unicable operation of three SAT receivers at one user line (Unicable mode in accordance with EN 50494)
HJ Each subscriber output can alternatively also be controlled from a standard DiSEqC receiver. The switching of the subscriber output in DiSEqC mode takes place automatically
HJ Highly decoupled passive input/return path (5-862 MHz) in accordance with EN 60728-1 and -3 for terrestrial or CATV
HJ Open trunkline outputs have to be closed with capacitively separated terminating resistor FR 75 DC
HJ Prepared for extended Unicable standard with more than two satellite positions
HJ For LNB-remote feeding connect an external power supply MSNT 19-2 (please order separately, Art. 57002172)
Description
Article-No.
SAT-IF-Inputs
Selectable SAT-Positions
Subscriber lines
Max. number of SAT receivers*
SAT input level dBµV
SAT output level Unicable dBµV
SAT output level DiSEqC legacy dBµV
Insertion loss TERR/BK
5-862 MHz dB
Insertion loss trunk TERR/SAT dB
Dimensions mm
Weight kg
MSU 58 P
5700 2164
4
1
8
24
64-92
84
74
23
3
202x162x50
0.5
MSU 54 P
5700 2163
4
1
4
12
64-92
84
74
23
1.5
162x122x50
0.4
MSU 98 P
5700 2166
8
2
8
24
72-100
84
77
23
5
220x220x50
0.9
MSU 94 P
5700 2165
8
2
4
12
72-100
85
76
23
5
220x220x50
0.86
MSU 178 P
5700 2168
16
4
8
24
70-95
82
76
23
5
350x220x50
1.4
MSU 174 P
5700 2167
16
4
4
12
72-100
83
75
23
5
350x220x50
1.35
Type 5-Cable system 9-Cable system 17-Cable system
* Unicable operation in accordance with EN 50494 Unicable SCR frequency 1: 1,280 MHz, -frequency 2: 1,382 MHz, -frequency 3: 1,484 MHz
The ideal combination of Unicable Sat Channel Router and DiSEqC Multiswitch
21
SATE
LLIT
E-TV
20
UNICABLE SINGLE SWITCH
HJ SAT-IF converter with flanged on power supply for single-cable solutions
HJ Providing of up to 8 subscribers HJ Safe when changing satellites or transpondersHJ Converters are controlled by the Unicable protocol from the
attached SAT receiversHJ Active input for terrestrial, switchable to passive for CATV with
return pathHJ HD capable due to minimal phase noise during SAT-IF conver-
sionHJ LED-indicationHJ Connectors F femalell Noisefree with programmable wall outlets SEU and SDU
Article-No.
SAT-IF inputs
Input terrestrial/CATV
Outputs trunkline
No. of connectable receivers
Product range / Type
5700 1318
8
1
1
8
SUM 918
Technical Features SUM 918
Frequency range MHz
Gain SUM 918 dB
Linearity dB
Attenuator dB
Phase noise dBc/Hz
Switching mode
SAT-channel subscriber Ch. 1
Ch. 2
Ch. 3
Ch. 4
Ch. 5
Ch. 6
Ch. 7
Ch. 8
Output level
2nd order DIN 45004A1 dBµV
3rd order DIN 45004B dBµV
Isolation: SAT/SAT dB
SAT/TERR dB
Output 1/Output 2 dB
Operating voltage V~
Remote feeding LNB
Power consumption W
Operating temperature ºC
Dimensions / Weight mm/kg
DiSEqC 1.1 Unicable Technology Ready (EN 50494)
185 - 265
13/18 V, 250 mA per LNB / 22 kHz selectable
12
-20 ... +55
370 x 150 x 70 / 2.9
950 - 2150
21 ... 25 (slope)
± 2.5
0 ... 20
-85 (bei 10 kHz)
1284 MHz
1400 MHz
1516 MHz
1632 MHz
1748 MHz
1864 MHz
1980 MHz
2096 MHz
114
> 26
> 35
> 26
47 - 862
-3* / 19 ... 23 (slope)
± 1.0
0 ... 20
> 40
> 26
5 - 30
-4*
± 1.0
* switched to passive
110
113
22
TERRESTRIAL ANTENNASFM antennas
Article-No.
Description
Frequency range MHz
Gain dB
Angle of aperture °
Wind load N
Mast Ø mm
Front to back ratio dB
Dimensions / Weight mm / kg
Type
5700 2053
omnidirectional antenna with F connector
87.5 - 108
-2
360
45
60
0
Ø 540 / 1.1
5700 2047
directional antenna
87.5 - 108
7
58
88
60
14
1700 / 1.7
TEA 201 R TEA 207
FM antennas for UHF range
Article-No.
Description
Frequency range MHz
Gain dB
Angle of aperture °
Wind load N
Mast Ø mm
Front to back ratio dB
Dimensions / Weight mm / kg
Type
5700 2046directional Yagi antenna
470 - 790 (K21-60)
11.5 ... 15.5
22 ... 44
91
60
29
800 / 0.85
TEA 415 3D
5700 2663Logarythmic periodical
Yagi antenna with LTE filter
470 - 790 (K21-60)
8
25
60
30
636 / 0.55
TEA 418 log
23
TERR
ESTR
IAL-
TV
24
TERRESTRIAL MULTIBAND AMPLIFIER
HJ Die-cast housingHJ RF connectors: F socketsHJ High output level HJ DVB-T low noise inputHJ Excellent linearityHJ Attenuators 0...20 dB at all inputsHJ Switch mode power supplyHJ Remote feeding 12 V/100 mA via all TV- inputs selectable
Article-No.
No. of inputs
Frequency range/inputs MHz
Bd. I/FM
Bd. III
Bd. IV/V
Bd. IV/V
Bd. IV/V (DVB-T)
Gain dB
Bd. I/FM
Bd. III
Bd. IV/V
Bd. IV/V (DVB-T)
Attenuators at all inputs dB
Noise figure dB
Bd. I/FM
Bd. III
Bd. IV/V
Bd. IV/V (DVB-T)
Linearity dB
Output level
60 dB IMA 3 dBµV
60 dB IMA 2 dBµV
Operating voltage V~
Power consumption W
Dimensions mm
Weight kg
Type1016 1397
4
47-68 / 87.5 - 108
174-230
470-862
470-862
–
34
34
34/40, selectable
34/40, selectable
0 ... 20
5
5
8
8
+_ 2.0
117
109
185-265
7
210 x 122 x 70 (IP 50)
1.4
MBV 40-4
1 UHF-input switchable tof B IV/V + B III, thus a DVB-T broadband antenna (B III+B IV/V) is directly connectable
24
950 - 2200
2
32 ... 39
2 x 0 ... 20
7 / ± 1.5
121
> 35
5 - 30
- 3
- 3
1
25
HJ Insertion-/splitband post amplifier, 1-cable-systemHJ Through a modern switching technology useful as
insertion- or splitband post amplifierHJ Frequency range 47-862/950-2200 MHzHJ Return path 5-30 MHz, passiveHJ With attenuator for SAT/TERHJ Terrestrial active/passive switchableHJ Fix slope at SAT-IFHJ Highly efficient switch mode power supply, LED indicationHJ High power for remote feeding of LNBHJ LNB- voltage 13/18 V selectableHJ Die-cast housing IP 50, Class A (EN 50083-2)
SPLITBAND AMPLIFIER TERRESTRIAL + SAT-IF
Type SVD 3834 E
Article-No.
Frequency range MHz
Inputs
Outputs
Gain: active dB
passive dB
Attenuator dB
Equalizer dB
Noise figure / Linearity dB
Output level
SAT 35 dB IMA3 dBµV
TERR 60 dB IMA3 dBµV
Isolation
SAT V / SAT H dB
SAT / TERR dB
Operating voltage V~
Remote feeding LNB
DC-pass
Power consumption W
Connectors
Dimensions mm
Weight kg
5700 1365
185 - 265
300 mA/12V, 250 mA/18 V
with jumper selectable
max. 400 mA
10.5
F female
210 x 122 x 70
1.2
5 - 30
- 2
- 2
47 - 862
1
34
- 2
0 ... 20
0 ... 18
7 / ± 1.0
117
> 35
950 - 2200
1
32 ... 39
0 ... 20
7 / ± 1.5
121
> 35
1
KBD 3830 E
5700 1364
185 - 265
2 x 250 mA
with jumper selectable
max. 400 mA
11.5
F female
210 x 122 x 70
1.2
47 - 862
2
31
- 3
0 ... 20
0 ... 18
7 / ± 1.0
114
> 35
25
CHAN
NEL
PRO
CESS
ING
TERR
ESTR
IAL-
TV
Devices for KAB 2000 and KAB 3000 headend units still available on request.
HEADEND KAB 4000
KAB 4000 – Headend Basic Unit
ll 8,4 or 2 slots for Quattro- and Twin-modules
ll Processing of up to 16 channels or 32 transponders
ll Collector of the headend 8-way (4- or 2-way) active 47-862 MHz integrated, suitable for adjacent channels
ll Programming via PC or tablet
ll Modulators separately adjustable
ll Compact, appealing design
ll Easy and reliable operation • Energy efficient, reliable power supply unit
26
HEADEND KAB
Type
Article-No.
Description
Possible Modulations
Software-Update
Frequency range input (SAT)
LNB-power / max. current
Output level
Test- / Measuring output
Power supply
Power input
Weight
Dimensions (W x L X D)
KAB 4000 BASIC UNIT
• DVB-S/S2/T/T2/C in QAM or COFDM
• DVB-S in QAM or PAL
• HDMI in QAM or COFDM
• AV in QAM, COFDM or RF-output channel
• COFDM in PAL
• HDMI & AV in QAM or COFDM
• Audio in TV mode
RS 232-Interface, fast update by software multiupdate
950-2150 MHz
12 V / 0.25 A at each input, max. 0.5A
analogue 106 dBµV; digital 103dBµV
-20 dB
180 - 265 V AC
5700 2879
KAB 4000 B2
5700 2878
KAB 4000 B4
5700 2156
KAB 4000 B8
max. 180 W
9 kg
440 (19”) x 370 x 170 mm
2.4 kg
115 x 240 x 235 mm
5 kg
265 x 370 x 170 mm
26
KAB 432
Twin: 2xDVB-T/T2/C in QAM
5700 2805
50-80 dBµV
6/7/8 MHz
1x CI (channel A)
typ. 45dB
11W
83-103 dBµV
K2-K69, S2-S41 (40-862 MHz) in 40 MHz grid
KAB 434
Twin: 2xDVB-T/T2/C in COFDM
5700 2807
50-80 dBµV
6/7/8 MHz
1x CI (channel A)
typ. 38dB
11.5W
83-103 dBµV
K2-K69, S2-S41 (40-862 MHz) in 40 MHz grid
KAB 435
Quattro: 4xDVB-T/T2/C in COFDM
5700 2808
50-80 dBµV
6/7/8 MHz
1x CI (channel A)
typ. 38dB
12.5W
83-103 dBµV
K2-K69, S2-S41 (40-862 MHz) in 40 MHz grid
Type
Modulation
Article-No.
Input level
IF-Bandwidth -3dB
Common Interface
MER
Power Input
Output level at 75 Ohm
Output channels
HEADEND KAB 4000
Plug-In Modules
ll Conversion: • DVB-S/S2 in DVB-C • DVB-S/S2 in DVB-T • DVB-T/T2/C in DVB-C and DVB-T
Type
Modulation
Artikel-No.
Input level
IF-Bandwidth -3dB
Common Interface
MER
Power Input
Output level at 75 Ohm
Output channels
KAB 433
Quattro: 4xDVB-T/T2/C in QAM
5700 2806
50-80 dBµV
6/7/8 MHz
1x CI (channel A)
typ. 45dB
12W
83-103 dBµV
K2-K69, S2-S41 (40-862 MHz) in 40 MHz grid
Type
Modulation
Article No.
Input level
Input symbol rate
Common Interface
DBV-S2 modulation
Power input
Output frequency 47-862MHz
Output level at 75 Ohm
KAB 421
Twin: 2xDVB-S/S2 in QAM
5700 2880
55-80 dBµV
max. 30MS/s
1x
QPSK, 8PSK
ca. 13W
2 channels n+1
80-100 dBµV
KAB 422
Quattro: 4xDVB-S2 in QAM
5700 2881
55-80 dBµV
max. 30MS/s
1x
QPSK, 8PSK
ca. 16W
4 adjacent channels
80-100 dBµV
Type
Article-No.
Description
KAB 441
Twin: 2xDVB-S/S2 in COFDM
5700 2882
KAB 442
Quattro: 4xDVB-S/S2 in COFDM
5700 2883
27
CHAN
NEL
PRO
CESS
ING
KAB 4000 C
5700 2915
Type
Article-No.
Description
HEADEND KAB 4000
Plug-In Modules
ll Conversion: • HDMI in DVB-C-HD or DVB-T-HD (MPEG4) • AV in DVB-C or DVB-T (MPEG 2) • AV in PAL
Type
Modulation
Article-No.
Bandwidth
MER
Power input
Output level at 75 Ohm
Programming RS232
KAB 464
Twin: 2xHDMI in COFDM, MPEG4
5700 2887
typ. 34dB
ca. 12W
85-100 dBµV
via PC
KAB 463
HDMI in COFDM, MPEG4
5700 2886
6,7,8 MHz
typ. 40dB
ca. 10W
85-105 dBµV
via PC
KAB 401
Twin: 2xAV in 2x individually prog.
RF-output channels
5700 2890
15 pol. Sub-D
2 channels 47-862 MHz
Independently programmable
ca. 100 dBµV
via PC
Type
Modulation
Article-No.
AV-Input / Bandwidth
Output frequency range
Output channels
Output level at 75 Ohm
Programming RS232
KAB 451
AV in QAM, MPEG2
5700 2888
4-8 MHz
47 - 862 MHz
85-105 dBµV
via PC
KAB 452
AV in DVB-T, MPEG2
5700 2889
6,7,8 MHz
47 - 862 MHz
85-105 dBµV
via PC
Type
Modulation
Article No.
Bandwith
Output symbol rate
MER
Power input
Output level at 75 Ohm
Programming RS232
KAB 461
HDMI in QAM, MPEG4
5700 2884
4-8 MHz
1.0-7.5 MSym
typ. 40dB
ca. 10W
85-105 dBµV
via PC
KAB 462
Twin: 2xHDMI in QAM, MPEG4
5700 2885
4-8 MHz
1.0-7.5 MSym
typ. 43dB
ca.12W
85-100 dBµV
via PC
KAB 4000-W
5700 2893
angle-set - 19“ for KAB 4000 B8
Germany and Austria
DCT DELTA GmbH
Bodanrückstraße 1
D-78351 Bodman
Tel. +49 7773 929258
Fax +49 7773 929259
www.dct-delta.de
Switzerland
DELTA Swiss AG
Industriezone Schächenwald
CH-6460 Altdorf
Tel. +41 4161 91400
Fax +41 4161 91409
www.delta-swiss.ch
7000
0220