SUNON SUNON
Fan Blower Cap Fan Dish Fan
SUNON Magnetic Levitation System (MS)
SUNON Magnetic Platethe Magic of MagicMagnetic Plate, the Heart of SUNON MS DesignTells You the Secret Why a Motor Could Operate Defect-freeMagnetic Plate, SUNON's Exclusive InnovationU.S. PAT. 6,097,120
Fan Motor DominationA Stunning New Tech From SUNON~ Magnetic Levitation System¡] MS¡̂ Noise-Free, Vibration-Free, Super Long Life
Because of so many not-easy-to-resolve disadvantages in traditional fan motors, Sunon took the challenge and has devoted many years in research and development on new motor structure for eliminating such disadvantages. As a result, MS design, the most revolutionary technology, once again wins Sunon's reputation.
What Makes MS Magic
When the motor with the MS technology is in operation, magnetic force between the permanent magnet in the hub and the magnetic plate mounted on the PCB helps to attract the impeller rotor towards the end point of shaft. The weight of the rotor is entirely neutralized by the magnetic force and enables the shaft turning without being affected by the gravitational force due to the dead weight of the rotor assembly, pivotally held in the bearing. In this way, a constant distance between bearing and shaft is maintained naturally without causing any contacts between the two surfaces.Because the shaft rotates evenly in a constant orbit and the rotor is held at fixed center line of rotation, no matter what the position is, during the operation of fan, there is no friction or noise created, and no slanting and wobbling happened, which means the bearing life is extended much longer.In addition for sleeve and ball bearings, MS also works well with Sunon's another own invention, the Vapo bearing, which features its specially treated inner surface to resist abrasions. With the combination of the MS design and Vapo bearing, all the advantages of ball and sleeve bearings are maintained but defects eradicated. In addition, Sunon's Vapo bearing with MS is capable of operating at temperature even higher than 700C.
SUNON MS Solution
MS+ Vapo Bearing
Deficiency of
Traditional
Motors
Sleeve Bearing
Ball Bearing
Weight of rotor is entirely loaded to the shaft, abrasive rotation between shaft and bearing will result in irregular and rough surface on inner surface of bearing bore. The fan motor rotation becomes not smooth and in return causes operation noise and shortens fan life.The oil ring and mylar washer not only create excess friction area but also prevent the high temperature gas evaporated from the lubricating oil from escaping to outside the fan assembly. Such gas if is not released appropriately before being solidified, would become nitride particles and rest in the gap between shaft and bearing bore. This causes the rotor stuck and induces excessive noise.
Entire weight of rotor assembly is totally neutralized by magnetic force in any rest position, keeping motor rotates evenly at a fixed center line and keeps a consistent distance from inner surface of bearing. No traditional rubs and noise occurred.Oil ring, washer, and lubricant for bearing assembly are no longer used in MS structure. Hence no more oil leakage or rotor stuck problem.MS design allows the fan operates in temperature higher than 700C.
When fan motor is operating, the steel balls inside generate higher rotational noise than that of sleeve bearing Construction of Ball bearing is quite weak and unable to absorb external impact and/or vibration therefore would easily be damaged and result in louder rotational noise.
SUNON Magnetic Levitation System
metal tube dust cap fixing ring stator
P.C.B. cap magnetic platebearing flexiblemagnet
Sunon has recently introduced its latest innovation called Magnetic Levitation System (MS) and soon causes great impact on motor field. MS design can collocate with all kinds of traditional motors using with sleeve bearing or ball bearing, helping fan motors creating an unprecedented vibration-free, noise-free operation environment, which is in urgent necessity for thermal management of PC and IT industry. The principle of SUNON MS design comes from the utilizing of magnetic force induced by the existing magnet inside the hub and the magnetic plate added to the PCB of the fan. When the fan is operating, the perfectly balanced rotor assembly would rotate in nearly perfect circular motion in a consistent orbit and the center of rotation of the rotor shaft would be the true centerline of the shaft and the bearing assembly.This phenomenon eliminates any rotational vibration and rubs between the shaft and the inner surface of the bearing in any resting position. Accordingly, this MS design creates unprecedented vibration-free and therefore noise-free operation condition for the fan. For traditional fan motors, with either sleeve or ball bearing, in addition to their known advantages and disadvantages, there are some shortcomings as shown in the following table :
Size(mm) Model dBA
FanFan
: Bearing System: VAPO Bearing / Ball Bearing
5 VDC5 VDC5 VDC
KD0535PFB1-8 MSKD0535PFB2-8 MSKD0535PFB3-8 MS
35x35x10 7500 6000 4500
25.52118
0.120.080.05
6.55.23.8
5 VDC5 VDC5 VDC
KD0503PHB1-8 MSKD0503PHB2-8 MSKD0503PHB3-8 MS
30x30x15 8500 7000 5500
0.160.110.10
272217�
6.04.83.2
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
KD0503PFB1-8 MS.VKD0503PFB2-8 MS.VKD0503PFB3-8 MS.VKD0503AFB1-8 MS.VKD0503AFB2-8 MS.VKD0503AFB3-8 MS.V
30x30x10 9500 8000 5500 9500 8000 5500
5.54.63.65.54.63.6
0.150.110.070.150.110.07
2522.5202522.520
5 VDC5 VDC5 VDC
KD0502PHB1-8 MSKD0502PHB2-8 MSKD0502PHB3-8 MS
25x25x15 1200010000 7000
292216
0.280.160.11
3.73.12.2
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
KD0502PFB1-8 MS.VKD0502PFB2-8 MS.VKD0502PFB3-8 MS.VKD0502AFB1-8 MS.VKD0502AFB2-8 MS.VKD0502AFB3-8 MS.V
25x25x10 1300010000 75001300010000 7500
3.53.02.33.53.02.3
0.250.180.110.250.180.11
262524262524
170001400010000170001400010000
282623282623
0.330.210.130.330.210.13
1.51.10.81.51.10.8
20x20x10 5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
KD0501PFB1-8 MSKD0501PFB2-8 MSKD0501PFB3-8 MSKD0501AFB1-8 MSKD0501AFB2-8 MSKD0501AFB3-8 MS
5 VDC5 VDC5 VDC5 VDC
KD0504PEV1-8 MSKD0504PEV2-8 MSKD0504PEB1-8 MSKD0504PEB2-8 MS
40x40x6 7000 6000 7000 6000
5.95.35.95.3
32283228
0.100.070.100.07
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
KD0535PEV1-8 MS.NKD0535PEV2-8 MS.NKD0535PEV3-8 MS.NKD0535PEB1-8 MS.NKD0535PEB2-8 MS.NKD0535PEB3-8 MS.N
35x35x6 6800 5800 4500 6800 5800 4500
5.04.33.05.04.33.0
231913242013
0.070.0550.040.070.0550.04
5 VDC5 VDC5 VDC5 VDC�5 VDC5 VDC
KD0503PEV1-8 MS.NKD0503PEV2-8 MS.NKD0503PEV3-8 MS.NKD0503PEB1-8 MS.NKD0503PEB2-8 MS.NKD0503PEB3-8 MS.N
30x30x6 4.93.72.24.93.72.2
0.140.090.060.140.090.06
282314.5292414.5
9500 8000 5000 9500 8000 5000
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
KD0502PEV1-8 MS.NKD0502PEV2-8 MS.NKD0502PEV3-8 MS.NKD0502PEB1-8 MS.NKD0502PEB2-8 MS.NKD0502PEB3-8 MS.N
25x25x6 1300011500 70001300011500 7000
0.220.180.070.220.180.07
312614.5312614.5
3.02.71.43.02.7 1.4
5 VDC5 VDC
12VDC12VDC
KD0504PDV2-8 MSKD0504PDB2-8 MSKD1204PDV2-8 MSKD1204PDB2-8 MS
40x40x8 6600 6600 6600 6600
5.45.45.45.4
32.53332.533
0.120.120.120.12
8800 7400 5500 8800 7400 5500
8.67.34.98.67.34.9
0.230.180.120.230.180.12
363025373126
40x40x10 12VDC12VDC12VDC12VDC12VDC12VDC
KD1204PFVX MSKD1204PFV1 MSKD1204PFV2 MSKD1204PFBX MSKD1204PFB1 MSKD1204PFB2 MS
*Specifications subject to change without notice
Volt. 0.80.50.30.80.50.3
0.90.60.350.90.60.35
0.80.60.40.80.60.4
0.80.60.3
0.90.550.40.90.550.4
0.90.60.35
1.00.70.35
0.90.60.40.90.60.4
1.050.551.050.550.70.70.70.7
1.21.00.61.21.00.6
1.00.650.351.00.650.36
WATTS RPM CFMInchH2O
2 Phase Half Wave Motor Series
SUNON Magnetic Levitation System(MS)
Size(mm) Model Volt. RPM CFM dBAInchH2OWATTS
50x50x10 12VDC12VDC12VDC12VDC12VDC12VDC
1.31.00.81.31.00.8
1.41.00.71.4�1.0�0.7
1.51.00.71.51.00.7
1.41.00.71.41.00.7
1.41.00.81.41.00.8
1.81.10.71.81.10.7
1.81.10.81.81.10.8
1.81.10.71.81.10.7
KD1205PFVX MSKD1205PFV1 MSKD1205PFV2 MSKD1205PFBX MSKD1205PFB1 MSKD1205PFB2 MS
50x50x10(G)
12VDC12VDC12VDC12VDC12VDC12VDC
KD1205PFV1 MS.GKD1205PFV2 MS.GKD1205PFV3 MS.GKD1205PFB1 MS.GKD1205PFB2 MS.GKD1205PFB3 MS.G
50x50x15 12VDC12VDC12VDC12VDC12VDC12VDC
KD1205PHV1 MSKD1205PHV2 MSKD1205PHV3 MSKD1205PHB1 MSKD1205PHB2 MSKD1205PHB3 MS
55x55x10(G)
12VDC12VDC12VDC12VDC12VDC12VDC
KD1255PFV1 MS.GKD1255PFV2 MS.GKD1255PFV3 MS.GKD1255PFB1 MS.GKD1255PFB2 MS.GKD1255PFB3 MS.G
60x60x15 12VDC12VDC12VDC12VDC12VDC12VDC
KD1206PHV1 MSKD1206PHV2 MSKD1206PHV3 MSKD1206PHB1 MSKD1206PHB2 MSKD1206PHB3 MS
60x60x20 12VDC12VDC12VDC12VDC12VDC12VDC�
KD1206PKV1 MSKD1206PKV2 MSKD1206PKV3 MSKD1206PKB1 MSKD1206PKB2 MSKD1206PKB3 MS
60x60x25 12VDC12VDC12VDC12VDC12VDC12VDC
KD1206PTV1 MSKD1206PTV2 MSKD1206PTV3 MSKD1206PTB1 MSKD1206PTB2 MSKD1206PTB3 MS
60x60x10(G)
12VDC12VDC12VDC12VDC12VDC12VDC
KD1206PFV1 MS.GKD1206PFV2 MS.GKD1206PFV3 MS.GKD1206PFB1 MS.GKD1206PFB2 MS.GKD1206PFB3 MS.G
1.31.00.71.31.00.7
1.61.20.80.61.61.20.80.6
40x40x20 12VDC12VDC12VDC12VDC12VDC12VDC12VDC12VDC
KD1204PKVX MSKD1204PKV1 MSKD1204PKV2 MSKD1204PKV3 MSKD1204PKBX MSKD1204PKB1 MSKD1204PKB2 MSKD1204PKB3 MS
45x45x10 12VDC12VDC12VDC12VDC12VDC12VDC
KD1245PFVX MSKD1245PFV1 MSKD1245PFV2 MSKD1245PFBX MSKD1245PFB1 MSKD1245PFB2 MS
6500 5600 4500 6500 5600 4500
12.410.6 8.512.410.6 8.5
0.170.120.100.170.120.10
363026373228
6500 5500 4500 6500 5500 4500
12.510.6 8.512.510.6 8.5
0.190.150.100.190.150.10
3530253631.526
5800 4700 3700 5800 4700 3700
17.013.010.217.013.010.2
0.230.170.120.230.170.12
3329223429.522.5
5700 4700 4000 5700 4700 4000
15.013.010.215.013.010.2
0.160.120.080.160.120.08
36�30�2636.5�30.5�27
4300 3800 3000 4300 3800 3000
21.018.015.021.018.015.0
0.180.140.120.180.140.12
36312537.531.526
4300 3600 3200 4300 3600 3200
22.018.515.022.018.515.0
0.170.140.100.170.140.10
3227.52532.52826
4500 3800 3100 4500 3800 3100
23.519.316.023.519.316.0
0.210.150.100.210.150.10
33.5292134.53122
5200 4300 3600 5200 4300 3600
16.514.011.316.514.011.3
0.17�0.120.070.170.120.07
35�34.5�28.53635�29
7500 6600 5300 7500 6600 5300
10.2 8.9 7.210.2 8.9 7.2
0.200.150.120.200.150.12
363125373327
8200 7200 6200 5200 8200 7200 6200 5200
0.270.210.160.110.270.210.160.11
27.525.52118 292621.518.5
10.8 8.9 7.7 6.310.8 8.9 7.7 6.3
: Bearing System: VAPO Bearing / Ball Bearing*Specifications subject to change without notice
BlowerBlower
25x25x10 5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
B0502PFB1-8 MSB0502PFB2-8 MSB0502PFB3-8 MSB0502AFB1-8 MSB0502AFB2-8 MSB0502AFB3-8 MS
Size(mm) Model Volt. RPM CFM dBAInchH2O
30x30x10 5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
B0503PFB1-8 MSB0503PFB2-8 MSB0503PFB3-8 MSB0503AFB1-8 MSB0503AFB2-8 MSB0503AFB3-8 MS
2 Phase Half Wave Motor Series
SUNON Magnetic Levitation System(MS)
WATTS0.90.60.30.90.60.3
0.950.650.350.950.650.35
Dish Fan Dish Fan
1.1�0.55�1.1�0.55
0.65�0.45�0.65�0.45
0.65�0.45�0.65�0.45
0.65�0.4�0.65�0.4
1.1�0.6�1.1�0.6
1.1�0.6�1.1�0.6
25x25x6 5 VDC5 VDC5 VDC5 VDC
052506VH-8 MS.CB.N052506VM-8 MS.CB.N052506BH-8 MS.CB.N052506BM-8 MS.CB.N
30x30x6 5 VDC5 VDC5 VDC5 VDC
053006VH-8 MS.CB.N053006VM-8 MS.CB.N053006BH-8 MS.CB.N053006BM-8 MS.CB.N
35x35x6 5 VDC5 VDC5 VDC5 VDC
053506VH-8 MS.CB.N053506VM-8 MS.CB.N053506BH-8 MS.CB.N053506BM-8 MS.CB.N
40x40x6 5 VDC5 VDC5 VDC5 VDC
054006VH-8 MS.CA054006VM-8 MS.CA054006BH-8 MS.CA054006BM-8 MS.CA
45x45x6 5 VDC5 VDC5 VDC5 VDC
054506VH-8 MS.CA054506VM-8 MS.CA054506BH-8 MS.CA054506BM-8 MS.CA
50x50x6 5 VDC5 VDC5 VDC5 VDC
055006VH-8 MS.CA055006VM-8 MS.CA055006BH-8 MS.CA055006BM-8 MS.CA
Size(mm) Model Volt. RPM CFM dBAInchH2OWATTS
Cap Fan Cap Fan
40x40x6(45x42x7 )
5 VDC5 VDC5 VDC5 VDC
054006VH-8 MS.AE054006VM-8 MS.AE054006BH-8 MS.AE054006BM-8 MS.AE
30x30x6(35x37x7)
5 VDC5 VDC5 VDC5 VDC
5 VDC5 VDC5 VDC5 VDC
0.9�0.55�0.9�0.55
0.9�0.6�0.9�0.6
0.9�0.6�0.9�0.6
053006VH-8 MS.AC.N053006VM-8 MS.AC.N053006BH-8 MS.AC.N053006BM-8 MS.AC.N
35x35x6(45x42x7)
053506VH-8 MS.AD.N053506VM-8 MS.AD.N053506BH-8 MS.AD.N053506BM-8 MS.AD.N
35x35x6(50x47x7)
5 VDC5 VDC5 VDC5 VDC
053506VH-8 MS.AF.N053506VM-8 MS.AF.N053506BH-8 MS.AF.N053506BM-8 MS.AF.N
40x40x6(50x49x7)
5 VDC5 VDC5 VDC5 VDC
054006VH-8 MS.AG054006VM-8 MS.AG054006BH-8 MS.AG054006BM-8 MS.AG
Size(mm) Model Volt. RPM CFM dBAInchH2OWATTS
1.1�0.6�1.1�0.6
1.1�0.55�1.1�0.55
1.1�0.6�1.1�0.6
1.10.6�1.1�0.6
45x45x6(50x49x7)
5 VDC5 VDC5 VDC5 VDC
054506VH-8 MS.AH054506VM-8 MS.AH054506BH-8 MS.AH054506BM-8 MS.AH
50x50x6(54x53x7)
5 VDC5 VDC5 VDC5 VDC
055006VH-8 MS.AI055006VM-8 MS.AI055006BH-8 MS.AI055006BM-8 MS.AI
4,787,8634,987,331 5,093,599 5,245,2365,297,9295,492,458 5,522,700 5,584,3395,582,5065,666,01 15,690,468 5,699,8545,734,5535,740,017 396,276 398,393398,392399,946 398,977 398,978396,276398,393 398,392 398,977399,946398,978 400,665 401,6865,873,406408,514 5,967,763 5,959,3775,988,9955,997,183 418,216 6,021,0436,050,7856,1 14,7856,097,120 6,109,8926,109,890
U.S. Patent Number
USC
Certification
Safety
0.400.250.200.400.250.20
1400010000 70001400010000 7000
363017363017
0.350.260.220.350.260.22
10000 8000 550010000 8000 5500
373019373019
1.00.80.451.00.80.45
1.31.10.551.31.10.55
6500550065005500
95008000950080006500550065005500
6500550065005500
6500550065005500
5.04.15.04.1
0.100.070.100.07
302630�26
5500450055004500
0.090.060.090.06
3025.53025.5
6.35.26.35.2
5200430052004300
7.26.27.26.2
0.080.060.080.06
27.524.527.524.5
32283228
5.04.15.04.1
0.100.070.100.07
24212421
0.080.060.080.06
4.33.44.33.4
0.080.060.080.06
24212421
4.33.44.33.4
29242924
0.140.100.140.10
3.63.23.63.2
12000100001200010000
302430.524.5
0.200.160.200.16
3.22.93.22.9
8500700085007000
282328.523.5
0.100.070.100.07
5.04.05.04.0
6500550065005500
262226.522.5
0.110.080.110.08
5.24.35.24.3
6500550065005500
24.523.524.523.5
0.100.070.100.07
5.04.15.04.1
5500450055004500
22.52022.520
0.090.060.090.06
6.35.26.35.2
5200430052004300
7.26.27.26.2
25.51925.5�19
0.080.060.080.06
Fan Fan
: Bearing System: VAPO Bearing / Ball Bearing*Specifications subject to change without notice
1 Phase Full Wave Motor Series
- - Green Motor
SUNON Magnetic Levitation System(MS)
Size(mm) Model Volt. RPM CFM dBAInchH2OWATTS
40x40x10 12VDC12VDC12VDC12VDC12VDC12VDC
GM1204PFVX-A GM1204PFV1-A GM1204PFV2-AGM1204PFBX-A GM1204PFB1-A GM1204PFB2-A
Size(mm) Model Volt. RPM CFM dBAInchH2O
40x40x20 12VDC12VDC12VDC12VDC12VDC12VDC12VDC12VDC
GM1204PKVX-A GM1204PKV1 -AGM1204PKV2 -AGM1204PKV3 -AGM1204PKBX -AGM1204PKB1 -AGM1204PKB2 -AGM1204PKB3 -A
25x25x10 5VDC5VDC5VDC5VDC5VDC5VDC
GM0502PFV1-8 GM0502PFV2-8GM0502PFV3-8GM0502PFB1-8 GM0502PFB2-8GM0502PFB3-8
25x25x15 5VDC5VDC5VDC5VDC
GM0502PHV2-8GM0502PHV3-8GM0502PHB2-8GM0502PHB3-8
5VDC5VDC5VDC5VDC5VDC5VDC
GM0503PEV1-8 N GM0503PEV2-8 NGM0503PEV3-8 NGM0503PEB1-8 NGM0503PEB2-8 NGM0503PEB3-8 N
30x30x6
5VDC5VDC5VDC5VDC5VDC5VDC
30x30x10 GM0503PFV1-8 GM0503PFV2-8GM0503PFV3-8GM0503PFB1-8 GM0503PFB2-8GM0503PFB3-8
5VDC5VDC5VDC5VDC
GM0503PHV2-8GM0503PHV3-8GM0503PHB2-8GM0503PHB3-8
30x30x15
5VDC5VDC5VDC5VDC5VDC5VDC
GM0535PEV1-8 N GM0535PEV2-8 NGM0535PEV3-8 NGM0535PEB1-8 NGM0535PEB2-8 NGM0535PEB3-8 N
35x35x6
5VDC5VDC5VDC5VDC5VDC5VDC
GM0535PFV1-8 GM0535PFV2-8GM0535PFV3-8GM0535PFB1-8GM0535PFB2-8GM0535PFB3-8
35x35x10
5VDC5VDC5VDC5VDC
40x40x6 GM0504PEV1-8 GM0504PEV2-8GM0504PEB1-8GM0504PEB2-8
WATTS
25x25x6 5VDC5VDC5VDC5VDC5VDC5VDC
GM0502PEV1-8 N GM0502PEV2-8 NGM0502PEV3-8 NGM0502PEB1-8 NGM0502PEB2-8 NGM0502PEB3-8 N
0.50.40.20.50.40.2
0.85�0.4�0.2�0.85�0.4�0.2
0.60.40.250.60.40.250.5�0.3�0.5�0.3
0.550.350.20.550.350.20.650.450.250.065�0.450.250.50.30.50.30.60.40.20.60.40.20.450.30.250.450.30.25
0.450.30.450.3
1.41.00.70.51.41.00.70.5
20x20x10 5VDC5VDC5VDC5VDC5VDC5VDC
GM0501PFV1-8 N GM0501PFV2-8 NGM0501PFV3-8 NGM0501PFB1-8 NGM0501PFB2-8 NGM0501PFB3-8 N
60x60x10(G)
12VDC12VDC12VDC12VDC12VDC12VDC
GM1206PFV1-A G GM1206PFV2-A G GM1206PFV3-A G GM1206PFB1-A G GM1206PFB2-A G GM1206PFB3-A G
50x50x15 12VDC12VDC12VDC12VDC12VDC12VDC
GM1205PHV1-A GM1205PHV2-AGM1205PHV3-AGM1205PHB1-A GM1205PHB2-A GM1205PHB3-A
55x55x10 (G)
12VDC12VDC12VDC12VDC12VDC12VDC
GM1255PFV1-A G GM1255PFV2-A G GM1255PFV3-A GGM1255PFB1-A G GM1255PFB2-A G GM1255PFB3-A G
60x60x15 12VDC12VDC12VDC12VDC12VDC12VDC
GM1206PHV1-A GM1206PHV2-A GM1206PHV3-A GM1206PHB1-A GM1206PHB2-A GM1206PHB3-A
60x60x20 12VDC12VDC12VDC12VDC12VDC12VDC12VDC12VDC
GM1206PKVX-A GM1206PKV1-A GM1206PKV2-A GM1206PKV3-A GM1206PKBX-A GM1206PKB1-A GM1206PKB2-A GM1206PKB3-A
60x60x25 12VDC12VDC12VDC12VDC12VDC12VDC12VDC12VDC24VDC24VDC24VDC24VDC24VDC24VDC�24VDC24VDC
GM1206PTVX-AGM1206PTV1-A GM1206PTV2-A GM1206PTV3-AGM1206PTBX-A GM1206PTB1-A GM1206PTB2-A GM1206PTB3-AGM2406PTVX-A GM2406PTV1-A GM2406PTV2-AGM2406PTV3-AGM2406PTBX-A GM2406PTB1-A GM2406PTB2-AGM2406PTB3-A
50x50x10 12VDC12VDC12VDC12VDC12VDC12VDC
GM1205PFVX-A GM1205PFV1-A GM1205PFV2-A GM1205PFBX-A GM1205PFB1-A GM1205PFB2-A
50x50x10(G)
12VDC12VDC12VDC12VDC12VDC12VDC
GM1205PFV1-A G GM1205PFV2-A G GM1205PFV3-A G GM1205PFB1-A G GM1205PFB2-A G GM1205PFB3-A G 1.2
0.70.51.20.70.5
1.1�0.70.51.1�0.70.5
1.0�0.7�0.5�1.0�0.7�0.5
1.20.70.51.20.70.5
1.20.8�0.5�1.2�0.8�0.5
2.81.61.00.62.81.61.00.62.91.91.41.02.91.91.4�1.0
2.6�1.61.00.62.6�1.61.00.6
1.41.00.51.41.00.5
0.80.6�0.5�0.8�0.6�0.5
45x45x10 12VDC12VDC12VDC12VDC12VDC12VDC
GM1245PFVX-A GM1245PFV1-A GM1245PFV2-A GM1245PFBX-A GM1245PFB1-A GM1245PFB2-A
0.8�0.7�0.5�0.8�0.7�0.5
8800 7400 5500 8800 7400 5500
8.67.34.98.67.34.9
0.230.180.120.230.180.12
363025373126
8200 7200 6200 5200 8200 7200 6200 5200
10.8 8.9 7.7 6.310.8 8.9 7.7 6.3
27.525.52118292621.518.5
0.270.210.160.110.270.210.160.11
1300010000 75001300010000 7500
3.53.02.33.53.02.3
0.250.180.110.250.180.11
2316 9.5251811
10000 700010000 7000
3.12.23.12.2
0.160.110.160.11
21152216
9500 8000 5500 9500 8000 5500
4.93.72.44.93.72.4
0.140.090.060.140.090.06
282316.528.523.517
9500 8000 5500 9500 8000 5500
5.54.63.65.54.63.6
0.150.110.070.150.110.07
232018252220
7000 5500 7000 5500
4.83.24.83.2
0.110.070.110.07
21162217
6800 5800 4500 6800 5800 4500
5.04.33.05.04.33.0
0.070.0550.040.070.0550.04
23191323.519.513.5
7500 6000 4500 7500 6000 4500
6.55.23.86.55.23.8
0.120.080.050.120.080.05
24181625.519.518�
7000 6000 7000 6000
5.95.35.95.3
0.100.070.100.07
32283329�
1300011500 70001300011500 7000
3.02.71.43.02.71.4
0.220.180.070.220.180.07
3025�15�3126�16�
1500010000 70001500010000 7000
0.260.150.070.260.150.07
242118�25�22�19
2.21.450.862.21.450.86
5200 4300 3600 5200 4300 3600
3534.528.5363529
0.170.120.070.170.120.07
16.514.011.316.514.011.3
5800 4700 3700 5800 4700 3700
0.230.170.120.230.170.12
3329223429.522.5
17.013.010.217.013.010.2
5700 4700 4000 5700 4700 4000
36�30�2636.5�30.5�27
0.160.120.080.160.120.08
15.013.010.215.013.010.2
4300 3800 3000 4300 3800 3000
36312537.531.526
0.180.140.120.180.140.12
21.018.015.021.018.015.0
5000 4300 3600 3200 5000 4300 3600 3200
38.53227.52538.532.52826
0.240.170.140.100.240.170.140.10
25.022.018.515.025.022.018.515.0
5200 4500 3800 3100 5200 4500 3800 3100 5200 4500 3800 3100 5200 4500 3800 3100
0.250.210.150.100.250.210.150.100.250.210.150.100.250.210.150.10
3833.5292138.534.531223833.5292138.534.53121
26.223.519.316.026.223.519.316.026.223.519.316.026.223.519.316.0
6500 5600 4500 6500 5600 4500
0.170.120.100.170.120.10
363026373228
12.410.6 8.512.410.6 8.5
6500 5500 4500 6500 5500 4500
3530253631.526
0.190.150.100.190.150.10
12.510.6 8.512.510.6 8.5
7500 6600 5300 7500 6600 5300
10.2 8.9 7.210.2 8.9 7.2
0.200.150.120.200.150.12
363125373327
Cap Fan Cap Fan
: Bearing System: VAPO Bearing / Ball Bearing*Specifications subject to change without notice
Dish Fan Dish Fan
0.45�0.3�0.45�0.3
0.65�0.45�0.65�0.45
0.65�0.45�0.65�0.45
0.65�0.4�0.65�0.4
0.5�0.35�0.5�0.35
0.5�0.35�0.5�0.35
25x25x6 5 VDC5 VDC5 VDC5 VDC
GC052506VH-8 CB.NGC052506VM-8 CB .NGC052506BH-8 CB.NGC052506BM-8 CB.N
30x30x6 5 VDC5 VDC5 VDC5 VDC
GC053006VH-8CB .NGC053006VM-8CB .NGC053006BH-8CB .NGC053006BM-8 CB .N
35x35x6 5 VDC5 VDC5 VDC5 VDC
GC053506VH-8CB .NGC053506VM-8CB .NGC053506BH-8CB .NGC053506BM-8CB .N
40x40x6 5 VDC5 VDC5 VDC5 VDC
GC054006VH-8CAGC054006VM-8CAGC054006BH-8CAGC054006BM-8CA
45x45x6 5 VDC5 VDC5 VDC5 VDC
GC054506VH-8CAGC054506VM-8CAGC054506BH-8CAGC054506BM-8CA
50x50x6 5 VDC5 VDC5 VDC5 VDC
GC055006VH-8CAGC055006VM-8CAGC055006BH-8CAGC055006BM-8CA
Size(mm) Model Volt. RPM CFM dBAInchH2O
40x40x6(45x42x7 )
5 VDC5 VDC5 VDC5 VDC
GC054006VH-8 AEGC054006VM-8 AEGC054006BH-8 AEGC054006BM-8 AE
30x30x6(35x37x7)
5 VDC5 VDC5 VDC5 VDC
5 VDC5 VDC5 VDC5 VDC
0.65�0.45�0.65�0.45
0.65�0.40.65�0.4
0.65�0.40.65�0.4
GC053006VH-8 AC.NGC053006VM-8 AC.NGC053006BH-8 AC.NGC053006BM-8 AC.N
35x35x6(45x42x7)
GC053506VH-8 AD.NGC053506VM-8 AD.NGC053506BH-8 AD.NGC053506BM-8 AD.N
35x35x6(50x47x7)
5 VDC5 VDC5 VDC5 VDC
GC053506VH-8 AF.NGC053506VM-8 AF.NGC053506BH-8 AF.NGC053506BM-8 AF.N
1 Phase Full Wave Motor Series
- - Green Motor
SUNON Magnetic Levitation System(MS)
25x25x10
35x35x4.8
35x35x6
35x35x7
40x40x7
40x40x9
45x45x7
BlowerBlower
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0502AFV1-8GB0502AFV2-8GB0502AFV3-8GB0502AFB1-8GB0502AFB2-8GB0502AFB3-8
5 VDC5 VDC
GB0535ACB1-8GB0535ACB2-8
30x30x10 5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0503AFV1-8GB0503AFV2-8GB0503AFV3-8GB0503AFB1-8GB0503AFB2-8GB0503AFB3-8
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0535AEV1-8GB0535AEV2-8GB0535AEV3-8GB0535AEB1-8GB0535AEB2-8GB0535AEB3-8
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0535ADV1-8GB0535ADV2-8GB0535ADV3-8GB0535ADB1-8GB0535ADB2-8GB0535ADB3-8
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0504ADV1-8GB0504ADV2-8GB0504ADV3-8GB0504ADB1-8GB0504ADB2-8GB0504ADB3-8
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0504AFV1-8GB0504AFV2-8GB0504AFV3-8GB0504AFB1-8GB0504AFB2-8GB0504AFB3-8
5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0545ADV1-8GB0545ADV2-8GB0545ADV3-8GB0545ADB1-8GB0545ADB2-8GB0545ADB3-8
45x45x9 5 VDC5 VDC5 VDC5 VDC5 VDC5 VDC
GB0545AFV1-8GB0545AFV2-8GB0545AFV3-8GB0545AFB1-8GB0545AFB2-8GB0545AFB3-8
Model Volt. RPM CFM dBAInchH2O
40x40x6(50x49x7)
5 VDC5 VDC5 VDC5 VDC
GC054006VH-8 AGGC054006VM-8 AGGC054006BH-8 AGGC054006BM-8 AG
WATTSSize(mm) WATTS
Size(mm) Model Volt. RPM CFM dBAInchH2OWATTS
0.8�0.55�0.250.8�0.55�0.250.85�0.55�0.3�0.85�0.55�0.30.8�0.35
0.6�0.4�0.25�0.6�0.4�0.250.6�0.4�0.25�0.6�0.4�0.250.45�0.25�0.15�0.45�0.25�0.150.30�0.20�0.15�0.30�0.20�0.15
0.50�0.30�0.15�0.50�0.30�0.15
0.35�0.25�0.15�0.35�0.25�0.15
0.5�0.3�0.5�0.3
0.5�0.3�0.5�0.3
0.5�0.35�0.5�0.35
0.5�0.35�0.5�0.35
45x45x6(50x49x7)
5 VDC5 VDC5 VDC5 VDC
GC054506VH-8 AHGC054506VM-8 AHGC054506BH-8 AHGC054506BM-8 AH
50x50x6(54x53x7)
5 VDC5 VDC5 VDC5 VDC
GC055006VH-8 AIGC055006VM-8 AIGC055006BH-8 AIGC055006BM-8 AI
9500 7500
0.90.7
0.310.22
3126
8500 7000 5500 8500 7000 5500
1.00.80.61.00.80.6
0.320.240.120.320.240.12
302519.5312620
1400010000 7000 14000 10000 7000
362817373019
0.40.250.200.40.250.20
1.00.80.451.00.80.45
10000 8000 550010000 8000 5500
1.31.10.551.31.10.55
8000 6500 5000 8000 6500 5000
1.21.00.81.21.00.8
0.320.220.130.320.220.13
3024.519.5312520 7500
6000 4500 7500 6000 4500
3325.519.5342620
0.340.230.120.340.230.12
1.51.30.91.51.30.9
6500 5500 4200 6500 5500 4200
1.81.51.11.81.51.1
3024.519.5312520
0.30.210.120.30.210.12
6500 5000 3500 6500 5000 3500
332619.5342720
0.340.200.100.340.200.10
2.31.81.22.31.81.2
5500 4500 3500 5500 4500 3500
2.21.81.42.21.81.4
292319.5302420
0.260.180.100.260.180.10
0.350.260.220.350.260.22
34261636�2717
12000100001200010000
302430.524.4
0.200.160.200.16
3.22.93.22.9
8500700085007000
0.100.070.100.07
282328.523.5
5.04.05.04.0
6500550065005500
5.24.35.24.3
0.110.080.110.08
262226.5�22.5
6500550065005500
5.04.15.04.1
0.100.070.100.07
24.523.525�24
5500450055004500
6.35.26.35.2
0.090.060.090.06
22.5202320.5
5200430052004300
7.26.27.26.2
0.080.060.080.06
25.51926�19.5
6500550065005500
0.100.070.100.07
322832.528.5
5.04.15.04.1
9500800095008000
3.63.23.63.2
0.140.100.140.10
292429.524.5
6500550065005500
6500550065005500
4.33.44.33.4
0.080.060.080.06
242124.521.5
6500550065005500
5.04.15.04.1
0.100.070.100.07
302630.5�26.5
5500450055004500
6.35.26.35.2
0.090.060.090.06
3025.530.526
5200430052004300
7.26.27.26.2
0.080.060.080.06
27.524.528�25
4.33.44.33.4
242124.521.5
0.080.060.080.06
Headquarters: Sunonwealth Electric Machine Industry Co., Ltd. 12th floor, 120 Chung Cheng 1st Road, Kaohsiung, Taiwan, R.O.C. TEL: +886-7-7163069(41 lines) FAX: +886-7-7163086URL: http://www.sunon.com E-mail: [email protected]
Sunon Inc. (U.S.A.) 1075 West Lambert Road Suite A, Brea, California 92821 U.S.ATEL : +1-714-255-0208 FAX :+ 1-714-255-0802URL : http://www.sunonusa.com E-mail : [email protected]
Sunon SAS (Europe)Parc Medicis, 66, Ave Des Pepinieres 94832, Fresnes Cedex-FranceTEL : +33-1-46154515 FAX : +33-1-46154510 URL: http://www.sunon.fr E-mail : [email protected]��Sunon German office (Germany)Amsterdamer Strasse 20 40474 Dusseldorf GermanyTEL : +49-211-496-39-39 FAX : +49-211-496-39-40URL: http://www.sunon.de E-mail : [email protected]
Sunon Corporation (Japan)Stork Minami Otsuka 4Fl.33-1, 2 Chome,Minami Otsuka Toshimaku, Tokyo Japan 170-0005TEL : +81-3-5395-3069 FAX: +81-3-5395-3080 URL: http://www.sunon.co.jp E-mail : [email protected]
Sunonwealth Electric Machine Industry (HK) Ltd. (Hong Kong)1513 Nan Fung Center, 264 Castle Peak Road, Tsuen Wan, Hong Kong TEL :+ 852-24-111-388 FAX : +852-24-050-707 E-mail : [email protected] Sunon Technologies Pte Ltd. (Singapore)10 Toh Guan Road, #03-08 TT International Tradepark, Singapore 608838TEL : +65-795-0300 FAX :+65-795-0600E-mail : [email protected]
2001/9/1
Worldwide Locations
2001 Sunonwealth Electric Machine Industry Co., Ltd. All Rights ReservedC