Chapter Introduction
Lesson 1 The Erosion-DepositionProcess
Lesson 2 Landforms Shaped by Water and Wind
Lesson 3 Mass Wasting and Glaciers
Chapter Wrap-Up
How do erosion and deposition shape Earth’s surface?
What do you think?
Before you begin, decide if you agree or disagree with each of these statements. As you view this presentation, see if you change your mind about any of the statements.
1. Wind, water, ice, and gravity continually shape Earth’s surface.
2. Pieces of sediment in different sizes tend to mix when being moved along by water.
3. A beach is a landform that does not change over time.
Do you agree or disagree?
4. Windblown sediment can cut and polish exposed rock surfaces.
5. Landslides are a natural process that cannot be influenced by human activities.
6. A glacier leaves behind very smooth land as it moves through an area.
Do you agree or disagree?
Lesson 1 Reading Guide - KC
• How can erosion shape and sort sediment?
• How are erosion and deposition related?
• What features suggest whether erosion or deposition created a landform?
The Erosion-Deposition Process
Lesson 1 Reading Guide - Vocab
• erosion
• deposition
The Erosion-Deposition Process
Lesson 1-1
• A combination of constructive processes and destructive processes produce landforms.
• Constructive processes build up features on Earth’s surface.
• Destructive processes tear down features on Earth’s surface.
Reshaping Earth’s Surface
Lesson 1-2
The breakdown of rock—weathering—is one type of destructive process that changes Earth’s surface.
Lesson 1-2
• Chemical weathering alters the chemical composition of rock.
• Physical weathering is the breaking of rock into pieces, called sediment, without changing the chemical composition of the rock.
• Water, wind, and ice are agents, or causes, of weathering.
A Continual Process of Change
Lesson 1-2
A Continual Process of Change (cont.)
• The mineral composition of some rocks makes them less resistant than others are to weathering.
• The difference in the rate of weathering can produce unusual landforms.
Lesson 1-2
Erosion
• Erosion is the removal of weathered material from one location to another.
• Agents of erosion include water, wind, glaciers, and gravity.
• Factors that affect the rate of erosion include weather, climate, shape of the land, and type of rock.
Lesson 1-2
Erosion (cont.)
• The presence of plants and the way humans use the land affect the rate of erosion.
• The rate of erosion sometimes depends on the type of rock.
• Weathering breaks some types of rock into large pieces. Other rock types easily break into smaller pieces that are more easily transported.
Lesson 1-2
As rock fragments bump against each other during erosion, the shapes of the fragments can change.
How can erosion affect the shape of sediment?
Erosion (cont.)
Lesson 1-2
• Erosion also affects the level of sorting—separating of items into groups according to one or more properties—of sediment.
• Sediment is often well-sorted when it has been moved a lot by wind or waves.
Erosion (cont.)
Lesson 1-2
Poorly sorted sediment often results from rapid transportation, perhaps by a storm, a flash flood, or a volcanic eruption.
How can erosion sort sediment?
Erosion (cont.)
Lesson 1-2
Deposition is the laying down or settling of eroded material.
deposition
from French deposer, means “put down”
Deposition
Lesson 1-2
Deposition (cont.)
• As water or wind slows down, it has less energy and can hold less sediment, which can result in some of the sediment being deposited.
• Sediment is deposited in locations called depositional environments, such as swamps, deltas, beaches, and the ocean floor.
Lesson 1-2
• High-energy environments, like rushing rivers and ocean shores with large waves, are those in which sediment is transported and deposited quickly.
• Small grains of sediment are often deposited in low-energy environments, like deep lakes, areas of slow-moving air, and swamps.
• Sediment deposited in water typically forms layers called beds.
Deposition (cont.)
Lesson 1-2
Deposition (cont.)
How are erosion and deposition related?
Lesson 1-3
• Landforms can have features that are clearly produced by erosion.
• Different rates of erosion can create unusual landforms like tall, protruding landforms called hoodoos.
• Glacial erosion can produce ice-carved features in mountains.
Interpreting Landforms
Lesson 1-3
• Landforms created by deposition are often flat and low-lying.
• An apron of sediment, called an alluvial fan, often forms where a stream flows from a steep, narrow canyon onto a flat plain at the foot of a mountain.
Interpreting Landforms (cont.)
Lesson 1-3
Interpreting Landforms (cont.)
What features suggest whether erosion or deposition created a landform?
Deposition along a riverbed occurs where the speed of the water slows down and can result in a sandbar.
Lesson 1 - VS
• Erosion occurring at different rates can carve rock into interesting landforms.
• Rock fragments with rough edges are rounded during transportation.
• Landforms created by deposition are often flat and low-lying.
Lesson 1 – LR1
A. chemical weathering
B. physical weathering
C. deposition
D. erosion
Which of these refers to the breaking of rocks into sediment without changing the chemical composition of the rock?
Lesson 1 – LR2
A. swamp
B. rushing river
C. ocean shore with large waves
D. none of the above
Which is an example of a low-energy environment?
Lesson 1 – LR3
A. erosion
B. sediment
C. weathering
D. deposition
Which term refers to the laying down or settling of eroded material?
Lesson 1 - Now
1. Wind, water, ice, and gravity
continually shape Earth’s surface.
2. Pieces of sediment in different sizes
tend to mix when being moved along
by water.
Do you agree or disagree?
Lesson 2 Reading Guide - KC
• What are the stages of stream development?
• How do water erosion and deposition change Earth’s surface?
• How do wind erosion and deposition change Earth’s surface?
Landforms Shaped by Water and Wind
Lesson 2 Reading Guide - Vocab
• meander
• longshore current
• delta
Landforms Shaped by Water and Wind
• abrasion
• dune
• loess
Lesson 2-1
• Water and wind are two important agents of weathering, erosion, and deposition.
• Erosion by water and wind can change the shape of landforms.
Shaping the Land with Water and
Wind
Lesson 2-2
• Streams are active systems that erode land and transport sediment.
• The erosion produced by a stream depends on the stream’s energy. This energy is usually greatest in steep, mountainous areas where young streams flow rapidly downhill.
• Water from a young stream slows down as it reaches gentler slopes and is then called a mature stream.
Water Erosion and Deposition
Lesson 2-2
• A meander is a broad, C-shaped curve in a stream.
• A stream moves slowly when it reaches flat land and is then called an old stream.
• As time passes, erosion of the outside bend of a meander, where water is flowing more quickly, occurs. Deposition occurs on the inside bend, where water flows more slowly.
Water Erosion and Deposition (cont.)
Lesson 2-2
Over time, meanders change shape due to erosion and deposition.
Lesson 2-2
Water Erosion and Deposition (cont.)
Describe the stream development stages.
Lesson 2-2
• Waves crashing into shore erode loose sand, gravel, and rock along coastlines.
• A longshore current is a current that flows parallel to the shoreline.
• This current moves sediment and continually changes the size and shape of beaches.
Water Erosion and Deposition (cont.)
Lesson 2-2
Water erosion can also form caves, stacks, and arches.
Water Erosion and Deposition (cont.)
How does water erosion change Earth’s surface?
Lesson 2-2
• Flowing water deposits sediment as the water slows down.
• Slower-moving water deposits sediment on the inside curves of meanders.
• A delta is a large deposit of sediment that forms where a stream enters a large body of water.
Water Erosion and Deposition (cont.)
Lesson 2-2
• Much of the sand on most ocean beaches was originally deposited by rivers.
• Longshore currents transport the sand along ocean coasts and deposit it where the currents have less energy.
Water Erosion and Deposition (cont.)
Lesson 2-2
Water deposition forms many structures within caves.
Water Erosion and Deposition (cont.)
How does water deposition change Earth’s surface?
Lesson 2-2
• Ocean waves can erode beaches by removing sediment.
• To reduce erosion, people sometimes build structures such as retaining walls or groins.
• Reducing or removing vegetation from the land surface is one of the most common ways that surface erosion is increased.
Water Erosion and Deposition (cont.)
Lesson 2-3
• Abrasion is the grinding away of rock or other surfaces as particles carried by wind, water, or ice scrape against them.
• A dune is a pile of wind-blown sand.
Wind Erosion and Deposition
Lesson 2-3
Wind Erosion and Deposition (cont.)
loess
from Swiss German Lösch, means “loose”
Loess is a crumbly, windblown deposit of silt and clay.
Lesson 2-3
Plowed fields and dry, overgrazed pastures are two ways in which people contribute to wind erosion.
Wind Erosion and Deposition (cont.)
How do wind erosion and deposition change Earth’s surface?
Lesson 2 - VS
• Water erosion changes Earth’s surface. An example of this is the change in features of a stream over time.
• Water transports sediment and deposits it in places where the speed of the water decreases.
• Wind erosion can change Earth’s surface by moving sediment. A dune and loess are two types of wind deposition.
Lesson 2 – LR1
A. meander
B. delta
C. longshore current
D. abrasion
Which term refers to the grinding away of rock or other surfaces as particles carried by wind, water, or ice scrape against them?
Lesson 2 – LR2
A. loess
B. dune
C. delta
D. meander
Which is a pile of wind-blown sand?
Lesson 2 – LR3
A. meander
B. delta
C. longshore current
D. loess
What is a current that flows parallel to the shoreline?
Lesson 2 - Now
3. A beach is a landform that does not change over time.
4. Windblown sediment can cut and polish exposed rock surfaces.
Do you agree or disagree?
Lesson 3 Reading Guide - KC
• What are some ways gravity shapes Earth’s surface?
• How do glaciers erode Earth’s surface?
Mass Wasting and Glaciers
Lesson 3 Reading Guide - Vocab
• mass wasting
• landslide
• talus
• glacier
Mass Wasting and Glaciers
• till
• moraine
• outwash
• Mass wasting is the downhill movement of a large mass of rocks or soil because of the pull of gravity.
• Mass wasting commonly occurs when soil on a hillside is soaked with rainwater.
• A landslide is the rapid downhill movement of soil, loose rocks, and boulders.
Mass Wasting
• Two types of landslides are a rockfall and a mudslide.
• Slump is a type of mass wasting where the material moves slowly, in a large mass.
• If the material moves too slowly to be noticeable, causing trees and other objects to lean over, the event is called creep.
Mass Wasting (cont.)
Mass Wasting (cont.)
What are some ways gravity shapes Earth’s surfaces?
• When material reaches a stable location, such as the base of a mountain, the material is deposited.
• Talus is a pile of angular rocks and sediment from a rockfall.
Mass Wasting (cont.)
• Human activity, such as removing vegetation, can affect both the severity of mass wasting and the tendency for it to occur.
• Landscaping or building on a slope can make the slope steeper and more likely to undergo mass wasting.
Mass Wasting (cont.)
• A glacier is a large mass of ice that formed on land and moves slowly across Earth’s surface.
• The two main types of glaciers are alpine glaciers and ice sheets.
• Glaciers erode Earth’s surface as they slide over it, carving the land as they move.
Glacial Erosion and Deposition
Alpine glaciers produce distinctive erosional features.
Glacial Erosion and Deposition (cont.)
How do glaciers erode Earth’s surface?
Sediment that was frozen in a glacier’s ice is eventually deposited in various forms.
Till is a mixture of various sizes of sediment deposited by a glacier.
Glacial Erosion and Deposition (cont.)
till
Science Use rock and sediment deposited by a glacier
Common Use to work by plowing, sowing, and raising crops
A moraine is a mound or ridge of unsorted sediment deposited by a glacier.
Glacial Erosion and Deposition (cont.)
moraine
from French morena, means “mound of earth”
• Outwash is layered sediment deposited by streams of water that flow from a melting glacier.
• A small change in Earth’s average temperature causes considerable melting of glaciers.
• As glaciers melt, sea level rises around the world.
Glacial Erosion and Deposition (cont.)
Lesson 3 - VS
• Mass wasting can occur very fast, such as when a landslide occurs, or slowly over many years.
• Material moved by a mass wasting event is deposited when it reaches a relatively stable location. An example is talus deposited at the base of a hill.
Lesson 3 - VS
• A glacier erodes Earth’s surface as it moves and melts. Glaciers can form U-shaped valleys when they move past mountains.
Lesson 3 – LR1
A. slump
B. talus
C. till
D. moraine
Which of these describes a type of mass wasting where the material moves slowly, in a large mass?
Lesson 3 – LR2
A. glacier
B. landslide
C. slump
D. talus
A large mass of ice that formed on land and moves slowly across Earth’s surface is called what?
Lesson 3 – LR3
A. till
B. outwash
C. moraine
D. talus
Which term refers to a mound or ridge of unsorted sediment deposited by a glacier?
Lesson 3 - Now
5. Landslides are a natural process that cannot be influenced by human activities.
6. A glacier leaves behind very smooth land as it moves through an area.
Do you agree or disagree?
Key Concept Summary
Interactive Concept Map
Chapter Review
Standardized Test Practice
Erosion and deposition are constructive and destructive forces that shape Earth’s surface by building up and tearing down landforms such as coastlines, dunes, rivers, lakes, mountains, glaciers, and deltas.
• Erosion is the wearing away and transportation of weathered material. Deposition is the laying down of the eroded material.
• Erosion tends to make rocks more rounded. Erosion can sort sediment according to its grain size.
• Landforms produced by deposition are usually on flat, low land. Landforms produced by erosion are often tall and/or jagged.
Lesson 1: The Erosion-Deposition
Process
Lesson 2: Landforms Shaped by
Water and Wind
• A young stream moves quickly down steep slopes. A mature stream moves more slowly and develops meanders. An old stream is wider and moves slowly.
• Water erosion forms V-shaped valleys. Longshore currents reshape beaches. Deposition of sediment from water can form deltas.
• Wind abrasion can alter the shape of rock. Wind deposition can form a dune or loess.
Lesson 3: Mass Wasting and Glaciers
• Gravity can shape Earth’s surface through mass wasting. Creep is an example of mass wasting.
• A glacier erodes Earth’s surface as it moves by carving grooves and scratches into rock.
A. physical weathering
B. chemical weathering
C. deposition
D. erosion
Which process always alters the chemical composition of rock?
A. hoodoos
B. alluvial fan
C. depositional environments
D. swamp
Locations where sediment is deposited are referred to as which of these?
A. longshore current
B. delta
C. dune
D. meander
What is a large deposit of sediment that forms where a stream enters a large body of water?
A. mature stream
B. delta
C. loess
D. meander
Which term refers to a broad, C-shaped curve in a stream?
A. landslide
B. talus
C. glacier
D. slump
A pile of angular rocks and sediment from a rockfall is referred to as which of these?
A. deposition
B. erosion
C. physical weathering
D. chemical weathering
Which term refers to the removal of weathered material from one location to another?
A. old stream
B. longshore current
C. delta
D. creep
What is a stream called when it reaches flat land and moves slowly?
A. dune
B. loess
C. delta
D. meander
Which term refers to a crumbly, windblown deposit of silt and clay?
A. rain
B. soil
C. gravity
D. erosion
Which of these is the dominant cause of mass wasting?
A. till
B. outwash
C. moraine
D. talus
Which of these refers to a mixture of various sizes of sediment deposited by a glacier?
Recommended
