UNIVERSITI TEKNIKAL MALAYSIA MELAKA
MECHANISM DEVELPOMENT OF GRIPPER FOR 5KG
PAYLOAD
This report submitted in accordance with requirement of the Universiti Teknikal
Malaysia Melaka (UTeM) for the Bachelor Degree of Manufacturing Engineering
(Robotic and Automation) with Honours.
by
MOHD JUZAILI @ AHMAD SYAIHAN BIN LOKMAN
FACULTY OF MANUFACTURING ENGINEERING
2010
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
BORANG PENGESAHAN STATUS LAPORAN PSM
JUDUL: MECHANISM DEVELOPMENT OF GRIPPER FOR 5 KG PAYLOAD
SESI PENGAJIAN: 2009-2010
Saya MOHD JUZAILI @ AHMAD SYAIHAN BIN LOKMAN mengaku membenarkan tesis (PSM/Sarjana/Doktor Falsafah) ini disimpan di Perpustakaan Universiti Teknikal Malaysia Melaka (UTeM) dengan syarat-syarat kegunaan seperti berikut:
1. Tesis adalah hak milik Universiti Teknikal Malaysia Melaka . 2. Perpustakaan Universiti Teknikal Malaysia Melaka dibenarkan membuat salinan
untuk tujuan pengajian sahaja. 3. Perpustakaan dibenarkan membuat salinan tesis ini sebagai bahan pertukaran
antara institusi pengajian tinggi.
4. **Sila tandakan (√)
SULIT
TERHAD
TIDAK TERHAD
(Mengandungi maklumat yang berdarjah keselamatan atau kepentingan Malaysia yang termaktub di dalam
AKTA RAHSIA RASMI 1972)
(Mengandungi maklumat TERHAD yang telah ditentukan
oleh organisasi/badan di mana penyelidikan dijalankan)
(MOHD JUZAILI @ AHMAD SYAIHAN
BIN LOKMAN) Alamat Tetap: NO 11, KG SIMPANG 4
35900, TG MALIM
PERAK
Tarikh: _______________________
Disahkan oleh:
(EN KHAIROL ANUAR BIN RAKIMAN)
Cop Rasmi:
Tarikh: _______________________
* Jika laporan PSM ini SULIT atau TERHAD, sila lampirkan surat daripada pihak berkuasa/organisasi berkenaan dengan menyatakan sekali sebab dan tempoh tesis ini perlu dikelaskan sebagai SULIT atau TERHAD.
DECLARATION
I hereby declare that this report entitled “Mechanism Development of Gripper for 5Kg
payload” is the result of my own research except as cited in the references.
Signature :
Author’s Name : Mohd Juzaili @ Ahmad Syaihan Bin Lokman
Date :
APPROVAL
This report is submitted to the Faculty of Manufacturing Engineering of UTeM as a
partial fulfillment of the requirements for the degree of Bachelor of Manufacturing
Engineering (Robotic and Automation). The members of the supervisory committee are
as follow:
Supervisor
En Khairol Anuar Bin Rakiman
Faculty of Manufacturing Engineering
i
ABSTRAK
Projek ini adalah berkaitan mekanisma dan pembangunan pencengkam dengan
muatan 5kg. Penghasilan pencengkam memerlukan beberapa kajian dan analisis
rekaan-rekaan yang telah wujud seperti penggunaan bahan, proses pembuatan dan
sebagainya. Projek terdahulu telah dibuat dari segi reka bentuk dan analisa berkenaan
pencengkam. Dalam projek ini, ia lebi fokus kepada proses yang terlibat di dalam
pembangunan pencengkam proses seperti memilih proses bahan, proses yang terlibat
dan proses pemasangan yang digunakan dalam penghasilan pencengkam. Komponen
pencengkam yang dihasilkan digabungkan sehingga sebuah pencengkam yang
lengkap dihasilkan. Kemudian ujian terhadap fungsi dan keupayaan pencengkam
telah dibuat untuk memastikan pencengkam dapat bertahan dan berfungsi
sepenuhnya.
ii
ABSTRACT
This project is about on mechanism and development of gripper with 5kg payload.
Gripper production need some study and analysis already existing designs such as
material utilisation, manufacturing process etc. In chapter 1, it covering about
introduction, project objective and scope the. Formerly, projects were made early in
gripper design and analyzing about the gripper structures and functionability. In this
project, its focusing on involved process research in gripper development process
like material selection process, involved process and assembly process applies in
gripper development. The gripper component is begin with fabrication of gripper
mechanism following with the gripper assembly until the complete gripper was
developed. Then the testing of gripper function and ability has been made to make
sure the gripper is sustained and fully functional.
iii
DEDICATION
To my beloved family and friends.
iv
ACKNOWLEDGEMENT
There are many people who deserve thanks for the contributions they have made to
this project. Firstly, I would like to express my endless grateful to my Final Year
Project’s Principal Supervisor, Encik Khairol Anuar Bin Rakiman. He directed and
instructed me through every phase of the project, and his guidance has been
invaluable. He also spent time and effort helping to resolve new issue by giving
advice and suggestion as the project developed and checking the report a number of
times.
I would like to thank my beloved parent, for their abiding love and endless patience.
Their support has been constant and enduring through the process of this project.
They deserve an enormous amount of recognition for their moral support throughout
this project. I am also grateful for all of my friends, who had giving their help and
idea in completing this project. Finally, I am deeply indebted to the lab technician
and all of the people that had directly or indirectly helped me during the period of
completing the project. Thank you.
v
TABLE OF CONTENTS
Abstrak i
Abstract ii
Dedication iii
Acknowledgement iv
Table of Content v
List of Figure ix
List of Table xi
1. INTRODUCTION 1
1.1 Overview 1
1.2 Problem Statement 3
1.3 Objectives of the project 4
1.4 Scope of Project 4
2. LITERATURE REVIEW 5
2.1 Overview 5
2.1.1 Operation 7
2.2 Gripping Action 7
2.2.1 External Gripping 7
2.2.2 Internal Gripping 7
2.3 Type of gripper 8
2.4 Existing Gripper Analysis 8
2.4.1 Major Factors in Choosing a Gripper and Jaw Design 8
2.4.2 Tolerance Analysis 10
2.4.2.1 Tolerance Analysis of Mechanisms 12
2.4.2.2 Tolerance Type 13
2.5 Major Factor Considerations in Manufacturing Gripper 14
2.5.1 Material Selection 14
2.5.1.1 Overview 14
2.5.1.2 Cost Issues 15
vi
2.5.1.3 Material Category 16
a) Plastics 16
i) High Density PolyEthylene (HDPE) 16
ii) PolyTetraFluorEtylene (PTFE) 17
iii) Neoprene 18
b) Metals 19
i) Aluminum 19
ii) Stainless Steel 20
iii) Mild Steel 21
c) Carbon Fiber 22
2.5.1.4 Material comparison 23
2.5.2 Manufacturing Process Selection 25
2.5.2.1 Fabrication of Gripper 25
2.5.2.2 Laser Cutting Machining (LCM) 25
2.5.2.3 Electrical Discharge Machining (EDM) 27
2.5.2.4 Turning Process 27
2.5.2.5 Milling 29
2.5.2.6 Grinding 30
2.5.2.7 Drilling 30
2.5.2.8 Fuse Deposition Modelling(FDM) 31
2.5.3 Gripper Assembly 32
2.5.3.1 Fastener 32
a) Bolt and machine Screw 32
b) Thread type Classification 33
i) Tapping Screw 32
ii) Slotted Screw 33
iii) Socket Head Cap Screw 34
c) Material Description of Screw 34
2.6 Gripper testing 34
2.6.1 Physical Prototype Testing 35
2.7 Conclusion 36
vii
3. METHODOLOGY 37
3.1 Introduction 37
3.2 Project Planning 37
3.3 Detail planning 39
3.4 Study of Preliminary Design 39
3.5 Finalize Conceptual Design Prototype 40
3.6 Protoype Fabrication Process 40
3.7 Assembly Process 43
3.8 Prototype Functional Testing 43
4. GRIPPER FABRICATION PROCESS 44
4.1 Introduction 44
4.2 Material Selection 44
4.3 Bill of material 45
4.4 Fabrication Process 47
4.4.1 Flow Chart Overview 49
4.4.2 Part 1: Base Fabrication 51
4.4.3 Part 2: Link/Supporter Fabrication 53
4.4.4 Part 3: Jaw Fabrication 56
4.5 Assembly Process 58
4.5.1 Gripper Assembly 58
4.5.2 Mechanical Component 60
5. GRIPPER FUNCTIONAL TESTING 62
5.1 Overview 62
5.2 Result 62
5.3 Griper Feature 64
5.3.1 Stability 64
5.3.2 Low Cost 65
5.3.3 Minimum Gripper Weight 65
5.3.4 Flexibility 66
5.3.5 Easy of Assembly or Disassembly 66
viii
5.4 Testing 67
5.4.1 Ability of gripper to extend and retract 67
5.4.2 Gripper lifting load 68
5.5 Discussion 71
5.5.1 Designing the gripper 71
5.5.2 Fabrication process of gripper 72
5.5.3 Gripper function and ability 72
6. CONCLUSION AND RECOMMENDATION 73
6.1 Conclusion 73
6.2 Recommendation 74
6.2.1 Design Aspects 74
6.2.2 Mechanical Structure Aspects 74
REFERENCE 76
ix
LIST OF FIGURE
Figure 2.1: Type of Gripper 8
Figure 2.2: The effect of an assign tolerance 11
Figure 2.3: Mathematical models of tolerance accumulation 11
Figure 2.4: Size Tolerance 13
Figure 2.5: Form Tolerance 13
Figure 2.6: Location Tolerance 14
Figure 2.7: Orientation Tolerance 14
Figure 2.8: Graph of Density (kg/m3) Versus Young’s Modulus (GPa) 15
Figure 2.9: HDPE material that use for base of the end arm 16
Figure 2.10: Application and product from PTFE material 18
Figure 2.11: Neoprene sheet 18
Figure 2.12: Robot end effectors that built using aluminum 19
structures as the main component
Figure 2.13: Carbon Fiber Wheel Tubs (47" Dia.) 22
Figure 2.14: The comparison of the material that choosen in gripper
fabrication 24
Figure 2.15: Example of piece of material that using Laser cutting 26
Figure 2.16: Turning process to manufacture shaft in accurate 28
shape and dimension
Figure 2.17: Shaft usually using turning method to achieve 28
desires diameter and shape
Figure 2.18: Milling process 29
Figure 2.19: Illustrated of the process at the cutting area 30
Figure 2.20: Illustrates a cross section of a hole being cut by 31
a common twist drill
Figure2.21: Components for this robotic gripper were first prototyped, then
manufactured,using FDM (Fused Deposition Modeling) 31
Figure 2.22: Example of bolt, machine screw 33
Figure 3.1: Flow of work process of developing gripper 38
x
Figure 3.2: The first design of gripper 39
Figure 3.3: The finalize design of gripper 40
Figure 4.1: Gripper flow of fabrication process 48
Figure 4.2: Diagram of fabrication process of gripper 50
Figure 4.3: Base fabrication 51
Figure 4.4: Robot Mount fabrication 51
Figure 4.5: Grippert Mount fabrication 52
Figure 4.6: Supporter fabrication 53
Figure 4.7: Slider fabrication 53
Figure 4.8: Supporter + Base Bracket fabrication 54
Figure 4.9: Rod fabrication 54
Figure 4.10: Guide Bar fabrication 54
Figure 4.11: Guide Bar + Base Bracket fabrication 55
Figure 4.12: Finger holder fabrication 56
Figure 4.13: Finger fabrication 56
Figure 4.14: Holder fabrication 57
Figure 4.15: Pneumatic cylinder model SMC CQ1 61
Figure 4.16: Cylinder that mounting to the gripper 61
Figure 5.1: Conceptual design 63
Figure 5.2: The succesful gripper development 64
Figure 5.3: The gripper grasps the 1 kg sugar pack 69
Figure 5.4: The gripper ungrasps the 1 kg sugar pack 69
Figure 5.5: The gripper grasps the 2 kg sugar pack 70
Figure 5.6: The gripper ungrasps the 2 kg sugar pack 70
xi
LIST OF TABLE
Table 2.1: Summarize of part characteristics and associated 9
end effector solutions
Table 2.2: International Tolerance (IT) grades 13
Table 2.2: Table of HDPE Properties 17
Table 2.3: Comparison of plastic that has been select for gripper fabrication 23
Table 2.4: Comparison of metal that has been select for gripper fabrication 24
Table 2.5: Material thickness requirement in LCM 26
Table 3.1: Example of machining process that use to machining parts 42
Table 4.1: Materials and components that used in gripper development. 46
Table 4.2: Gripper assembly process 58
Table 5.1: Gripper parts and function 66
Table 5.2: Gripper movement 68
1
CHAPTER 1
INTRODUCTION
1.1 Overview
The design of the end-of-arm tooling for a robotic assembly system is very important for
reducing errors and decreasing cycle times. This is the piece of the robotic parts handler
or assembler that physically interacts with the environment. While many factors may be
blamed for the common failures of workcells, the culprit is very often the grippers. Well
designed grippers can increase throughput, improve system reliability, compensate for
robot inaccuracy, and perform value added functions to the assembly.
According to dictionary of McGraw-hill(2003), gripper is define as a component of
robot that grasp an object, generally through the use of suction cups, magnets, or
articulated mechanism. Gripper provides the capacity to do a wide variety of
manipulative task. Robotic hand or gripper is the integral part in most of the robot
application. A robot arm itself can serve no purpose until a load or a tool is suspended
from or attached to it. The robotic application in assembly and material handling is
growing more rapidly in industrial environment. Thus, design of robotic gripping
mechanism always becomes the key element for a specific operation.
Guo et al, (1992) explained that the main function of a gripper is to grasp and to release
workpieces during the material transfer route. Generally, the gripper for industrial robots
is a specialized device that is used to handle only one or a few objects of similar shape,
size and weight in a repetitive operation, which requires minimum gripping dexterity
and is limited in its versatility. However, in other applications, the robot gripper will be
2
required to handle many different objects of varying weights, shapes, and material.
Then, we shall refer to a more universal or versatile grippers. Gripper types will be
discussed furthers in literature review.
Arthur G. Erdman (1986) mention that the design of the gripper systems is not a trivial
task. Unfortunately, the finalized parts and assembly sequence are often given to the
designer, who must then devise grippers to handle the parts and perform the assembly. It
is much more desirable for the design of the grippers to occur concurrently with the
design of the rest of the system. Often a small feature added to a part can greatly
increase the reliability of the gripper. Other times, a proper gripper design can simplify
the overall assembly, increase the overall system reliability, as well as decrease the cost
of implementing the system.
The gripper is the mechanical interface between the robot and the work and the device
with which the robot performs its programmed handling functions. Correctly selecting
the gripper for an application is essential to the success of the application. Arthur G.
Erdman (1986) explained that gripper selection is a may not be an easy task since there
are wide variety of gripper types and configurations and many different factors to
consider. Information on the factors which are relevant to the selection process is
incomplete and tends to be qualitative. The material available and ease or manufacturing
is also an important consideration.
The end of the manipulator is the part the user or robot uses to affect something in the
environment (Spencer, 2005). For this reason it is commonly called an end-effector, but
it is also called a gripper since that is a very common task for it to perform when
mounted on a robot. It is often used to pick up dangerous or suspicious items for the
robot to carry, some can turn doorknobs and others are designed to carry only very
specific things like beer cans. Even for semi-autonomous robots where a human controls
the manipulator, using the gripper effectively is often difficult. For these reasons, gripper
design requires as much knowledge as possible of the range of items the gripper will be
expected to handle. Their mass, size, shape, strength, etc. all must be taken into account.
3
In this study, a robot gripper that has been design by the previous students is required be
to fully analyses for its physical properties when handling load. Solid Work will be use
as the analysis software for finite element analysis to the gripper. Finally, the gripper has
to go through workspace testing by using simulation software to observe its performance
in real time working situation.
1.2 Problem Statement
The mechanism and development of robotic gripper is highly complex and environment
dependent. To deal with complexity, the entire design project has to be broken down into
several sub problems which are then treated independently as optimization problem.
However, the constraints are generally dependent on each other. In this project, problem
occur due finding the best way to fabricate the gripper. Furthermore, the existing design
must be revised to mention the gripper able to grasp object with 5 kg payload.
The study of this project is focus on improvement and continuation work on the previous
PSM project which is a 10kg payload gripper for Comau robot. Then, study of the
manufacturing process of the gripper and fabricate it. Basically the gripper design has
been carried out in the last PSM. Since the current task is design analysis on 5kg payload
gripper for Comau robot, this mean there would be a little improvement to the previous
design and finally the gripper is fabricate assemble on Comau Robot.
Often, very little time is spent in optimal kinematics structure design in the early stages
of a design process. D. T. Pham (1988) describes that a time pressures sometimes force
engineers to repeat topologies that have worked in similar application in the past rather
than try to create better design. It is always encourages to follow the previous design
unless the design analysis really proven that it was not good. Thus, modification and
optimization are requires to upgrade the design to achieve a better performance.
4
Generally, a physical prototype is necessary to truly test a hand’s ability to perform
tasks, but this can be quite costly and design changes are not easy to make. Thus it
would need a simulation system that able to load a gripper hand design, to interact with
it and perform grasps of objects, and to visualize and evaluate the space of performance
and error that might occurs. After simulation have been perform well, the design is
fabricated and assemble it with Comau robot to done the task.
1.3 Objectives
The objective of this project is to fabricate and assembled gripper to perform a pick and
place operation for 5kg payload boxes. Below are important objective has to be
achieved:
a) To improve the design and relevent aspect.
b) To develop the gripper prototype
c) To carry out functional testing on the gripper
1.4 Scope
The scope is focused on related aspect in this project so that the objectives are able to
accomplish. Scope on this project will cover up the below task:
a) Revisit the existing design
b) Develop, fabricate and assembly the gripper.
c) Testing the gripper performance and functional ability.
6
CHAPTER 2
LITERATURE REVIEW
2.1 Overview
Motion devices imitate the movements of people, in the case of the gripper, it is the
fingers. S. H. Yeo (1988) said that gripper is a device that holds an object so it can be
manipulated. It has the ability to hold and release an object while some action is being
performed. The fingers are not part of the gripper, they are the specialized custom
tooling used to grip the object and was referred as a “jaw”
In robotics, an end effector is a device or tool that's connected to the end of a robot arm
where the hand would be. The end effector is the part of the robot that interacts with the
environment. The structure of an end effector and the nature of the programming and
hardware that drives it depend on the task the robot will be performing.
In manufacturing, a robot arm can accommodate only certain tasks without changes to
its end effector's ancillary hardware and/or programming. If a robot needs to pick
something up, a type of robot hand called a gripper is the most functional end effector. If
a robot needs to be able to tighten screws, however, then the robot must be fitted with an
end effector that can spin.
Maximum payload is the weight of the robotic wrist, including the EOAT and
workpiece. It varies with different robot applications and models.
7
2.1.1 Operation
The most widely used gripper is the pneumatically powered gripper; it is basically a
cylinder that operates on compressed air. When the air is supplied, the gripper jaws will
close on an object and firmly hold the object while some operator is performed, and then
the air direction will change and the gripper will release the object. Typical uses are to
change orientation or to move an object in a pick-n-place operation.
2.2 Gripping Action
2.2.1External:
This is the most popular method of holding objects, it is the most simplistic and it
requires the shortest stroke length. When the gripper jaws close, the closing force of the
gripper holds that object.
2.2.2 Internal:
In some applications, the object geometry or the need to access the exterior of the object
will require that the object is held from the center. In this case the opening force of the
gripper will be holding the object.
8
2.3 Types of Grippers
The most popular types of grippers are the 2 jaw parallel and 2 jaw angular gripper
styles. Parallel grippers open and close parallel to the object that it will be holding, these
are the most widely used grippers. They are the simplest to tool and can compensate for
some dimensional variation. Angular grippers move the jaws in a radial manner to rotate
the jaws away from the object and therefore require more space.
Figure 2.1: Type of Gripper (Yeo 1988)
2.4 Existing Gripper Analysis
2.4.1 Major Factors in Choosing a Gripper and Jaw Design
a) Part shape, orientation and dimensional variation
Two jaw parallel gripper is desired if the object has two opposing flat surfaces,
since it can handle some dimensional variation. Jaws can also be designed to
handle cylindrical objects with the 2 jaw concept. Keep in mind that retention or
encompassing grip requires much less force.
9
Table 2.1: Summarize of part characteristics and associated end effector solutions
Part Characteristics Gripper Characteristics
Size,
weight
Large, heavy Grippers using wrap grips
- taking advantage of friction or vacuum or electromagnetic
holding
Small, light Two-fingered gripper
vacuum cup if smooth surface
electromagnet if ferrous alloy
Shape Prismatic Two-fingered parallel-jaw gripper; angular motion if all parts have
approximately same dimensions
Cylindrical if light: use parallel or angular motion two-finger gripper with V-
jaw fingertips
if heavy: use wrap gripper
- consider gripping on end with three-finger gripper if task or
fixtures permit
Flat Parallel or angular motion gripper or vacuum attachment
Irregular Wrap grasp using linkages or bladder consider
- augmenting grasp with vacuum or electromagnetic holding
for heavy parts.
Surface Smooth Good for vacuum attachments, simple electromagnets, two-
fingered grippers with flat fingertips
Rough Compliant material (e.g., low durometer rubber) on fingertips or
compliant membrane filled with powder or magnetic particles.
- grippers that use a wrap grasp are less sensitive to variations
in surface quality.
Slippery Consider electromagnet or vacuum to hold
- grippers that use a wrap grasp are less sensitive to variations in
friction
Material Ferrous Electromagnet
- concerns that do not rule out the presence of strong magnetic
fields
Soft Consider vacuum or soft gripping materials
Very delicate Soft wrap grippers and vacuum grippers so can grip gently
- compliant fingertips with foam rubber use to distribute the
contact pressure
if the part is very light and fragile consider lifting it using the
Bernoulli effect
b) Gripper Weight:
Grip force must be adequate to secure the object while a desired operation is
performed on the object. The type of jaw design must be part of the force
requirement. Keep in mind that you should add a safety factor to the amount of
force that you select and air pressure is a factor to keep in mind.
10
c) Accessibility
This applies both to the work being performed on the object and the amount of
room for the gripper jaws. If the work is to the exterior of the object then it may
require an internal grip. Angular grippers are usually less expensive but require
additional space for jaw movement.
d) Environmental
Harsh environment or clean room applications require grippers designed for
those purposes.
e) Retention of the Object
When air pressure is lost, the gripper will relax its grip on the object and the
object may be dropped. There are spring assist grippers designed for this type
application.
2.4.2 Tolerance Analysis
Alan R. Parkinson (1991) in his articles mentioned that tolerance management is a key
element in their programs for improving quality, reducing overall costs and retaining
market share. The specification of tolerances is being elevated from a menial task to a
legitimate engineering design function. New engineering models and sophisticated
analysis tools are being developed to assist design engineers in specifying tolerances on
the basis of performance requirements and manufacturing considerations. Koenderink
and van Doorn (1987) performed a tolerance analysis to measure the extent to which
certain information is available in velocity flow fields