WELLPROTEK™
ANNULAR PACKING UNITS
FREUDENBERGOIL & GAS TECHNOLOGIES
FOGT Part # Packing Unit
Description
Size Rated Working Pressure Type Temp Rating Temp Range
10044895-33 WellProtek™NBR 162 13 5/8” 5,000 psi Spherical FGD 40°F to 275°F
(4°C to 135°C)
10044894-33 WellProtek™NBR 162 11” 5,000 psi Spherical FGA 40°F to 180°F
(4°C to 82°C)
WellProtek™ NBR 162 Annular units tested to 115% of API fa�gue test target*
70
60
50
40
30
20
10
0
# AP
I Tes
t Cyc
les
WellProtek™ NBR 16213 5/8” 5K Annular Packing Units
WellProtek™ NBR 16211” 5K Annular Packing Units
Fatigue Test
* FO> fa�gue test stopped at 60 cycles. Units were not taken to failure.
+115%
API-16A test standard (52 cycles)
Available worldwide through our global facilities.For more information please contact us at [email protected]
WellProtek™ NBR 162 annular units tested to
115% of API fatigue test target**
70
60
50
40
30
20
10
0
# A
PI Te
st C
ycle
s
WellProtek™ NBR 162 13 5/8” 5KAnnular Packing Units
WellProtek™ NBR 162 11” 5KAnnular Packing Units
Fatigue Test
* FO> fatigue test stopped at 60 cycles. Units were not taken to failure.
+115%
API-16A test standard (52 cycles)
**FO> fatigue test stopped at 60 cycles. Units were not taken to failure.*All WellProtek™ Annular Packing Units are manufactured at FO>’s
API Q1 and APU-16A licensed facility (certificate number 16A-0429)
C° 0 25 50 75 100-25
0 25 50 100 125 150 175 200 225F°
40°F 180°F
FREUDENBERGOIL & GAS TECHNOLOGIES
WELLPROTEK™
ANNULAR PACKING UNITS
WellProtek™ is FO>’s line of API-16A licensed* annular packing units. All units are Factory Acceptance Tested (FAT) before shipment, stamped with the official API Monogram® and shipped with full documentation in compliance with API-16A requirements.
Our WellProtek™ units utilize proprietary elastomers, products of FO>’s material development and engineering expertise. Through extensive testing, our compounds show superior Rapid Gas Decompression (RGD) resistance and extended durability and performance.
Freudenberg Oil & Gas Technologies is a global provider of innovative sealing solutions and differentiated products to the upstream oil & gas industry, including metal-to-metal, advanced thermoplastic and elastomeric sealing solutions.
Our commitment and dedication to develop market leading technologies and support with in-house product verification testing is featured with the successful introduction of the WellProtek™ API-16A licensed units.
WellProtek™ Benefits:
• Meets or exceeds original equipment requirements
• Fully tested, design verified, and supported by traceable documentation in accordance with API-16A specifications
• Utilizes FO> proprietary elastomer compounds,
qualified to NORSOK RGD standards
Temperature Range
• Tested and qualified to F-A temperature ratings according to API-16A 4th edition, temperature classification
V-3 2019