whafi.com http://whafi.com/sewing-techniques/how-to-sew-in-sleeve-heads How to Sew in Sleeve Heads WHAT IS IT? A sleeve head is a strip of padding sewn into the cap of a set-in jacket or coat sleeve to support the sleeve cap and round it out. The sleeve head is sewn along the top of the armhole seam. It extends into the sleeve and fills out the rounded top of the sleeve cap. Sleeve heads can be bought ready-made, or you can make your own from cotton batting, thick flannel, lambswool or even polar fleece in a pinch. Sleeve heads are used along with shoulder pads to build structure into the garment. WHEN DO YOU USE IT? Sleeve heads are used in tailored, lined jackets with set-in sleeves (page link). They’re used in pairs with shoulder pads to add structure to a coat or jacket. When making tailored jackets, if you use a shoulder pad, you may want to use a sleeve head as well. It helps to hide the seam allowances at the top of the armhole and creates a smoother, rounder looking sleeve cap. The more structure you build into your coats and jackets, the better they will hold their shape over time. Are they necessary? Personally I’m in favor of anything that will improve the look of my projects and help them to keep their shape. Tips + Notes Not sure if your project needs sleeve heads? If it has shoulder pads and set-in sleeves, chances are it will look even better with the sleeve cap rounded out. Make your own sleeve heads by cutting a 2″-wide (5cm) bias strip of lambswool or flannel. Cut two strips, each 9″ (22.8cm) long, one for each sleeve. Polar fleece can work as a sleeve head if you don’t have any premade sleeve heads or lambswool on hand. Cut a strip as indicated and backstitch it in place. It’s a nontraditional option, but the thickness and softness of polar fleece will do the trick. HOW TO SEW IN SLEEVE HEADS Fold in half lengthwise to find the center, and mark it with a pin. Place the sleeve head in the sleeve cap. Line up the center marking with the shoulder seam, and line up one edge of the sleeve head with the armhole sleeve allowance. Pin the sleeve head into the armhole. Starting at one end, sew the sleeve head in place through the sleeve seam allowance with a backstitch (page link). Make the backstitches about 3⁄8″ (1cm) long. Here’s what the sleeve cap will look like with a sleeve head inserted: rounded and smooth. Source : The Sewtionary An A to Z Guide to 101 Sewing Techniques + Definitions About the Author : Tasia ST. Germaine Tags: how to sew a sleeve, sewing tips, sleeve head, sleeve heads sewing, sleeves

How to sew in sleeve heads

Download PDF Report

Upload
dewi-masithoh
View
42
Download
0

Embed Size (px)

Citation preview

whafi.com http://whafi.com/sewing-techniques/how-to-sew-in-sleeve-heads

How to Sew in Sleeve Heads

WHAT IS IT?

A sleeve head is a strip of padding sewn into the cap of a set-in jacket or coat sleeve to support the sleeve capand round it out. The sleeve head is sewn along the top of the armhole seam. It extends into the sleeve and fillsout the rounded top of the sleeve cap. Sleeve heads can be bought ready-made, or you can make your own fromcotton batting, thick flannel, lambswool or even polar fleece in a pinch. Sleeve heads are used along with shoulderpads to build structure into the garment.

WHEN DO YOU USE IT?

Sleeve heads are used in tailored, lined jackets with set-in sleeves (page link). They’re used in pairs withshoulder pads to add structure to a coat or jacket. When making tailored jackets, if you use a shoulder pad, youmay want to use a sleeve head as well. It helps to hide the seam allowances at the top of the armhole and createsa smoother, rounder looking sleeve cap. The more structure you build into your coats and jackets, the better theywill hold their shape over time. Are they necessary? Personally I’m in favor of anything that will improve the look ofmy projects and help them to keep their shape.

Tips + Notes

Not sure if your project needs sleeve heads? If it has shoulder pads and set-in sleeves, chances are it willlook even better with the sleeve cap rounded out.

Make your own sleeve heads by cutting a 2″-wide (5cm) bias strip of lambswool or flannel. Cut two strips,each 9″ (22.8cm) long, one for each sleeve.

Polar fleece can work as a sleeve head if you don’t have any premade sleeve heads or lambswool onhand. Cut a strip as indicated and backstitch it in place. It’s a nontraditional option, but the thickness andsoftness of polar fleece will do the trick.

HOW TO SEW IN SLEEVE HEADS

Fold in half lengthwise to find the center, and mark it with a pin.

Place the sleeve head in the sleeve cap. Line up the centermarking with the shoulder seam, and line up one edge of thesleeve head with the armhole sleeve allowance. Pin thesleeve head into the armhole.

Starting at one end, sew the sleeve head in place throughthe sleeve seam allowance with a backstitch (page link).Make the backstitches about 3⁄8″ (1cm) long.

Here’s what the sleeve cap will look like with a sleeve headinserted: rounded and smooth.

Source : The Sewtionary An A to Z Guide to 101 SewingTechniques + DefinitionsAbout the Author : Tasia ST. Germaine

Tags: how to sew a sleeve, sewing tips, sleeve head, sleeve heads sewing, sleeves

http://whafi.com/

http://whafi.com/sewing-techniques/how-to-sew-in-sleeve-heads