Blagdon pumps and products

IDEX Proprietary & Confidential

BLAGDON


• Company founded in 1955 in Durham, UK

• Acquired by IDEX in 1997

• Moved to larger facility in Shannon, Ireland in 2010


Blagdon

Pumps

Standar

d Pumps

Metallic

Non-

metallic

Flap

Valve

Pumps

Special

Pumps

High

Pressure

Pumps

Hygienic

Pumps

Steam

Jackete

d Pumps

PTFE

Pumps


Metallic Pumps

• Bolted Design

• Side Ported

• Available Sizes: ¼” ½”, 1”, 1½”, 2”, 3”

• MOC Options : Stainless Steel, Aluminum, Cast Iron, Alloy C

• Flow Rate: 0- 202 GPM

• Maximum discharge Pressure – 125PSI

• Can Handle Solids up to 9.5mm in size.

• Ball Type Check Valves


Non-metallic Pumps

• Bolted Design

• Porting Option –Side & Center

• Available Sizes: ¼”, ½”, 1”, 2”, 3”

• MOC Options : Polypropylene, Conductive Polypropylene, PVDF

• Flow Rate: 0- 238GPM

• Maximum discharge Pressure – 100PSI

• Can Handle Solids up to 18mm in size.

• Ball Type Check Valves


• Bolted construction

• Bottom discharge ported for efficient solid handling

• Flap valve pump for line size solid handling

• Air valve designed for in-line maintenance

• Available sizes: 1”, 2” & 3”

• Flow rate – 0 to 264 GPM.


High Pressure Pumps

• Ensure full system pressure where airline pressures are insufficient .

• 2:1 Ratio Pumps giving high fluid pressures up to 16 Bar

• Available in 1” and 2”

Applications :

Ideal for Filter Press work

long pipe runs

higher viscosity and other tough applications


• EHEDG Approved • ‘CIP’- No need to strip clean • Electro polished SS316L internal parts • Tri-clamp/RJT ports • Available from ¼” to 2” • Special mounting for draining

Applications :

Food , Pharma, Personal Care & Cosmetic Industry where cleaneability is essential


Applications: For Food processing


• Simple construction, easy to maintain

• Available in virgin and conductive PTFE

• Chemically inert

• Flanged end connections

• ATEX approved - intrinsically safe

• Reliable, proven pneumatic air valve

• Strong, robust design

• Flow Rate – 0 to 36 GPM

• Available Sizes – ½”, 1”

• 316L Stainless Steel Valve Block as standard

• For aggressive solvents transfer


ATEX (Explosive Atmosphere)

FDA (Food and Drug Administration)

CE (Conformité Européenne)

EHEDG ( European Hygienic Engineering and Design Group

GOST-R



Reduce air consumption up to 50%

Automatically adapts to process conditions

Powered only by compressed air – No batteries

Increases productivity

Reduce compressor maintenance

Optimizes energy and performance


Step 1: • Air enters main inlet • Small amount of air directed to turbine that powers unit Step 2: • Air Regulator Valve controls air flow volume • Air continues on standard path through air system Step 3: • Sensor monitors pump velocity, sends data to microprocessor • Microprocessor calculates ideal air usage, regulates air valve


Size – 2” & 3”

Available in both metallic and non-metallic construction

Any 2” & 3” standard and heavy duty pumps can be upgraded to AirVantage

Flow Rate – 0 to 245 GPM




• Reduce Pulsation • Reduce Leaking / Damage • Reduce Manifold Stress Use Flex Connections primarily on larger units 1 ½”, 2”, and 3”.


• No Lubrication Required • Clean / Dry Air is a Plus But Not Required.

Tip: Keeping the muffler clean will improve pump performance. A dirty muffler can lead to stalling.


• Thermal Expansion • Positive Inlet Pressure • Head Pressure

“The Windows to Pump Performance”


Leak Detection Filter/Regulator Stroke counter/Batch control

Level Controllers Surge suppressors Air Dryer


Spare Kits - Blagdon

Reduce frequency of repairs

Increase service life

Increase uptime

Save time and money


Quality Assurance


Assembly cycle testing with hold pressure vacuum readings (standard)

Certified one-point head capacity tests Certified additional points Dry lift testing

Hydro/pneumatic testing 90 psi (standard) Hydro/pneumatic 1½ times maximum operating

pressure

Pump repair (labor only)

AODD Project Capabilities

Service Description


Certificate of origin Certificate of conformance (Pump) Standard non-certified dimensional outlines (to order

contact Application Engineering) Certified dimensional outlines Material test reports (MTR) Certificate of compliance (Material)

Epoxy, water based, two part (exterior only Customer specific PTFE Halar Nickel plating midsection

Custom and Engineered products and system to meet

your application Custom product dimensional outlines


Service Description


Four (4) lines, maximum 24 letters Custom Nameplate PMI (Positive material identification Hardness testing Liquid penetrant testing Radiographic testing Magnetic particle testing Other

Impact test Seismic test Sound test Other


Service Description


http://www.idexindia.in/blagdon-pump/


Savli, Vadodara

IDEX Fluid & Metering – Manufacturing facility Blagdon AODD Pumps in India


Our Contacts Manufacturing Facilities:

Blagdon Pump

79, Shannon Industrial Estate Shannon, Co.

Clare, Ireland

Tel: +353 61 471933

Fax: +353 61 475046

IDEX Fluid & Metering Pvt. Ltd.

Survey No. 256, GIDC Manjusar, Savli

Near Bombardier Circle,

Distr. Vadodara 391770, India

Tel: +91-2667-662-001

Sales & Support

Blagdon - Mumbai

S 14, First floor

Solitaire Corporate Park, 167, Guru Hargovindji Marg,

Chakala,

Andheri (East), Mumbai 400 093

Tel: +91-22 6643-5552/5555

Email: [email protected]

Blagdon - Delhi

4th flr, Office No. 801 Statesman House, Barakhamba

Road Connaught Place

New Delhi 110001

Tel: +91-11-3044-6482


Blagdon - Chennai

The Executive Centre, Tamarai Tech Park Level 5,

S.P.Plot No.16-19 & 20-A,

Thiru Vi Ka Industrial Estate, Inner Ring Road, Guindy,

Chennai 600032, India

Tel: +91 44 6693 6630


mailto:[email protected]


