Floorplanning

DoVLSI Presentation

RTL Design Flow

Physical Design –Overall Flow

Floorplanning

• Floorplan of an integrated circuit is a schematic representation of tentative placement of its major functional blocks.

• Depending on the design methodology being followed, the actual definition of a floorplan may differ.

Why Floorplanning? The floorplanning problem is to plan the positions and shapes of the modules at the beginning of the design cycle to optimize the circuit performance:– chip area– total wirelength– delay of critical path– routability– others, e.g., noise, heat dissipation, etc.

Floorplanning

Goals• Assign shape and location of blocks.• Decide location of I/O pads.• Decide location and number of power pads.• Decide type of power distribution.• Decide location and type of clock distribution.

Objectives• Keep highly connected blocks physically close to each other.• Minimize chip area.• Minimize delay.

7

Floorplanning

Input

Set of blocks.Area estimation.Possible block shapes.Number of terminals.Netlist.

Output

Shapes (Area & Aspect Ratio) and locations of blocks.

Soft Blocks• Flexible shape• I/O positions not yet determined

Hard Blocks•Fixed shape•Fixed I/O pin positions

Design Styles

Full Custom• Floorplanning is needed.

Standard Cell• Fixed cell dimensions. Floorplanning translates into a placement

problem.• Floorplanning may be required for large cells if they are

partitioned into several blocks.

Gate Array• Placement problem.

Slicing and Non-Slicing Floorplan

Slicing Floorplan: One that can be

obtained by repetitively subdividing (slicing) rectangles horizontally or vertically.

Non-Slicing Floorplan:One that may not be

obtained by repetitively subdividing alone.

`

10

Floorplanning

Area

Deadspace

Minimizing area = Minimizing deadspace

Wire length estimation• Exact wire length not known until after

routing.

• Pin position not known.

• How to estimate?• Center to center estimation.

Floorplanning Algorithm

• Stockmeyer algorithm• Simulated annealing• Linear programming• Sequence-pair based floorplanning

12

Floorplanning

• Represent floorplan by normalized polish expression.

7 5

6

1

4

2 3

E = 16H7H25HV34HV

Encounter Floorplan