Upload
ilya-ganelin
View
8.193
Download
1
Embed Size (px)
Citation preview
Next Gen Decision Making in <2ms
2
3
VS.
4
5
6
7
X (predictor)Spend amount
Y (response)Likelihood of millionaire
Simple Velocity Advanced
8
9
10
11
12
Hard Metrics Goal
Latency < 40msIdeally < 16ms
Throughput Goal of 2000 events / second
Durability No loss, every message gets exactly one response
Availability 99.5% uptime (downtime of 1.83 days / year);Ideally 99.999% uptime (downtime of 5.26 minutes / year)
Scalability Can add resources, still meet latency requirements
Integration Transparently connected to existing systems – Hardware, Messaging, HDFS
Soft Metrics Goal
Open Source All components licensed as open source
Extensibility Rules can be updated, model is regularly refreshed
13
14
Onyx
15
Enterprise Readiness
RoadmapPerformance
Community
16
17
18
19
20
21
YARN
22
23
24
25
26
• Avg. 0.25ms, @70k records/sec, w/ 600GB RAM
Thread Local on ~54M eventsPercentiles (in ms)
Throughput Count Avg (ms) 90% 95% 99% 99.9% 4 9’s 5 9’s 6 9’s
70k/sec 54,126,122 0.19 1 1 1 2 2 5 6
Performance
27
Durability
• Two physically independent pipelines on the same cluster processing identical data
• For the same tuple, we find the best-case time between two pipelines– 39 records out of 5.2M exceeded 16ms – 173 out of 5.2M exceeded 16ms in one pipeline but succeeded in the other
• 99.99925% success rate – “Five Nines”•Average Latency of 0.0981ms
28
29
30
Appendix
31
Streaming Technologies Evaluated
• Spark Streaming• Samza• Storm• Feedzai• Infosphere Streams• Flink• Ignite• VoltDB• Cassandra• Apex
• Of all evaluated technologies, Apache Apex is the only technology that is ready to bring the decision making solution to production based on:– Maturity– Fault-tolerance– Enterprise-readiness– Performance
• Focus on open source• Drive Roadmap• Competitive Advantage for C1
32
Stream Processing – Apache Storm
• An open-source, distributed, real-time computation system– Logical operators (spouts and bolts) form statically parallelizable topologies– Very high throughput of messages with very low latency– Can provide <10ms latency end-end under normal operation
• Basic abstractions provide an at-least-once processing guarantee
Limitations• Nimbus is a single point of failure
– Rectified by Hortonworks, but not yet available to the public (no timeline for release)• Upstream bolt/spout failure triggers re-compute on entire tree
– Can only create parallel independent stream by having separate redundant topologies• Bolts/spouts share JVM Hard to debug• Failed tuples cannot be replayed quicker than 1s• No dynamic topologies• Cannot add or remove applications without service interruption
33
Stream Processing – Apache Flink
• An open-source, distributed, real-time computation system– Logical operators are compiled into a DAG of tasks executed by Task Managers– Supports streaming, micro-batch, batch compute– Supports aggregate operations on streams (reduce, join, groupBy)– Capable of <10 ms end-end latency with streaming under normal operation
• Can provide exactly-once processing guarantees
Limitations• Failures trigger reset of ALL operators to last checkpoint
– Depends on upstream message broker to track state• Operators share JVM
– Failure in one brings down all tasks sharing that JVM– Hard to debug
• No dynamic topologies• Young community, young product
34
Stream Processing – Apache Apex
• An open-source, distributed, real-time computation system on YARN• Apex is the core system powering DataTorrent, released under ASF• Demonstrated high throughput with low latency running a next-generation
C1 model (avg. 0.25ms, max 2ms, @ 70k records/sec) w/ 600GB RAM• True YARN application developed from principles of Hadoop and YARN at
Yahoo!
• Mature product (derived from proven solutions in Yahoo! Finance and Hadoop) – Built by team under Phu Hoang (CEO of DataTorrent, Head of Engineering at Yahoo)
who built Hadoop– Amol (CTO of DataTorrent) led the team that built YARN
• DataTorrent (Apex) is executing on production clusters at Fortune 100 companies.
35
Stream Processing – Apache Apex
Maturity• Designed to process and manage global data for Yahoo! Finance
– Primary focus is on stability, fault-tolerance and data management– Only OSS streaming technology considered designed explicitly for the financial world
• Data or computation could never be lost or replicated• Architecture had to never go down • Goal was to make it rock-solid and enterprise-ready before worrying about performance
• Data flow across countries – perfect for use-case that requires cross-cluster interaction
Enterprise Readiness• Advanced support for:
– Encryption, authentication, compression, administration, and monitoring– Deployment at scale in the cloud and on-prem – AWS, Google Cloud, Azure
• Integrates with huge set of existing tools:– HDFS, Kafka, Cassandra, MongoDB, Redis, ElasticSearch, CouchDB, Splunk, etc.
36
Apex Platform – Summary
• Apex Architecture– Networks of physically independent, parallelizable operators that scale dynamically– Dynamic topology modification and deployment– Self-healing, fault tolerant, & recoverable
• Durable messaging queues between operators, check-pointed in memory and on disk• Resource manager is a replicated YARN process, monitors and restarts downed operators
– No single point of failure, highly modular design– Can specify locality of execution (avoids network and inter-process latency)
• Guarantees at-least-once, at-most-once, or exactly-once processing
Directed Acyclic Graph (DAG)
Filtered
Stream
Output Stream
Tuple Tuple
Filtered Stream
Enriched Stream
Enriched
Stream
er
Operator
er
Operator
er
Operator
er
Operator
37
Apex Platform – Overview
38
Apex Platform – Malhar
39
Apex Platform – Cluster View
Hadoop Edge Node
DT RTS Management
Server
Hadoop Node
YARN ContainerRTS App Master
Hadoop Node
YARN ContainerYARN Container
YARN Container
Thread1
Op2
Op1
Thread-N
Op3
Streaming Container
Hadoop Node
YARN ContainerYARN Container
YARN Container
Thread1
Op2
Op1
Thread-N
Op3
Streaming Container
CLI
REST API
DT RTS Management
Server
REST API
Part of Community Edition
40
Apex Platform – Operators
• Operators can be dynamically scaled
• Flexible stream configuration• Parallel Redis / HDHT DAGs• Separate visualization DAG
• Parallel partitioning• Durability of data• Scalability• Organization for in-memory store
• Unifiers• Combine statistics from physical
partitions
41
Dynamic Topology Modification
• Can redeploy new operators and models at run-time!
• Can reconfigure settings on the fly
42
Apex Platform – Failure Recovery
• Physical independence of partitions is critical
• Redundant STRAMs
• Configurable window size and heartbeat for low-latency recovery
• Downstream failures do not affect upstream components – Snapshotting only depends on previous operator, not all previous operators– Can deploy parallel DAGs with same point of origin (simpler from a hardware and
deployment perspective)
43
Apex Platform – Windowing
• Sliding window and tumbling window
• Window based on checkpoint
• No artificial latency
• Used for stats measurement
44
• Apex– Great UI to monitor, debug, and control system performance– Fault-tolerance and recovery out of the box - no additional setup, or improvement
needed• YARN is still a single point of failure, a name node failure can still impact the system
– Built-in support for dynamic and automatic scaling to handle larger throughputs– Native integration with Hadoop, YARN, and Kafka – next-gen standard at C1– Mature product
• Apex is derived from the principles of Hadoop and YARN over the course of many years• Built and planned by chief Hadoop architects
– Proven performance in production at Fortune 100 companies
Enterprise Readiness
45
Enterprise Readiness
• Storm – Widely used but abandoned by creators at Twitter for Heron in production
• Storm debug-ability - topology components are bundled in one process• Resource demands
– Need dedicated hardware– Can’t scale on demand or share usage
• Topology creation/tear-down is expensive, topologies can’t share cluster resources– Have to manually isolate & de-commission machines
– Performance in failure scenarios is insufficient for this use-case
• Flink– Operational performance has not been proven
• Only one company (ResearchGate) officially uses Flink in production– Architecture shares fundamental limitations of Storm with regards to
dynamically scaling operators & topologies and debugability– Performance in failure scenarios is insufficient for this use-case
46
Performance
• Storm – Meets latency and throughput requirements only when no failures occur. – Resilience to failures only possible by running fully independent clusters– Difficult to debug and operationalize complex systems (due to shared JVM and poor
resource management)• Flink
– Broader toolset than Storm or Apex – ML, batch processing, and SQL-like queries– Meets latency and throughput requirements only when no failures occur. – Failures reset ALL operators back to the source – resilience only possible across
clusters– Difficult to debug and operationalize complex systems (due to shared JVM)
• Apex– Supports redundant parallel pipelines within the same cluster– Outstanding latency and throughput even in failure scenarios– Self-healing independent operators (simple to isolate failures)– Only framework to provide fine-grained control over data and compute locality
47
Roadmap – Storm
• Commercial support from from Hortonworks but limited code contributions
• Twitter - Storm’s largest user - has completely abandoned Storm for Heron• Business Continuity
– Enhance Storm’s enterprise readiness with high availability (HA) and failover to standby clusters
– Eliminate Nimbus as a single point of failure• Operations
– Apache Ambari support for Nimbus HA node setup– Elastic topologies via YARN and Apache Slider. – Incremental improvements to Storm UI to easily deploy, manage and monitor
topologies.• Enterprise readiness
– Declarative writing of spouts, bolts, and data-sources into topologies
48
Roadmap – Flink
• Fine-grained fault tolerance (avoid rollback to data source) – Q2 2015
• SQL on Flink – Q3/Q4 2015
• Integrate with distributed memory storage – No ECD
• Use off-heap memory – Q1 2015
• Integration with Samoa, Tez, Mahout DSL – No ECD
49
Roadmap – Apex
• Roadmap for next 6 months
• Support creation of reusable pluggable modules (topologies)• Add additional operators to connect to existing technology
– Databases– Messaging– Modeling systems
• Add additional SQL-like operations– Join– Filter– GroupBy– Caching
• Add ability to create cycles in graph– Allows re-use of data for ML algorithms (similar to Spark’s caching)
50
Road Map Comparison
• Storm– Roadmap is intended to bring Storm to enterprise readiness Storm is not enterprise
ready today according to Hortonworks• Flink
– Roadmap brings Flink up to par with Spark and Apex, does not create new capabilities relative to either
– Spark is more mature for batch-processing and micro-batch and Apex is more mature from a streaming standpoint.
• Apex– No need to improve core architecture, focus is instead on adding functionality
• Better support for ML• Better support for wide variety of business use cases• Better integration with existing tools
– Stated commitment to letting the community dictate direction. From incubator proposal:• “DataTorrent plans to develop new functionality in an open, community-driven way”
51
Community
• Vendor and community involvement drive roadmap and project growth
• Storm– Limited improvements to core components of Storm in recent months– Limited focused and active committers– Actively promoted and supported in public by Hortonworks
• Flink– Some adoption in Europe, growing response in U.S.– 11 active committers, 10 are from Data Artisans (company behind Flink)– Community is very young, but there is substantial interest
• Apex– Wide support network around Apex due to its evolution from Hadoop and YARN– Young but actively growing community: http://incubator.apache.org/projects/apex.html– Opportunity for C1 to drive growth and define the direction of this product
52
Streaming Solutions Comparison
• Apex– Ideal for this use case, meets all performance requirements and is ready for out-of-the-
box enterprise deployment– Committer status from C1 allows us to collaboratively drive roadmap and product
evolution to fit our business need.• Storm
– Great for many streaming use cases but not the right fit for this effort– Performance in failure scenarios does not meet our requirements– Community involvement is waning and there is a limited road map for substantial
product growth• Flink
– Poised to compete with Spark in the future based on community activity and roadmap – Not ready for enterprise deployment:
• Technical limitations around fault-tolerance and failure recovery• Lack of broad community involvement• Roadmap only brings it up to par with existing frameworks
53
New Capabilities Provided by Proposed Architecture
• Millisecond Level Streaming Solution• Fault Tolerant & Highly Available• Parallel Model Scoring for Arbitrary Number of Models• Quick Model Generation & Execution• Dynamic Scalability based on Latency or Throughput• Live Model Refresh• A/B Testing of Models in Production• System is Self Healing upon failure of components (**)
54
Decisioning System Architecture - Strengths
• Internal– Capital One software, running on Capital One hardware, designed by Capital One
• Open source– Internally maintainable code
• Living Model– Can be re-trained on current data & updated in minutes, not years– Offline models can expanded and re-developed and deployed to production at will
• Extensible– Modular architecture with swappable components
• A/B Model Testing in Production• Dynamic Deployment / Refresh of Models
55
Hardware
MDC Hardware Specifications• Server Quantity – 15• Server Model – Supermicro• CPU – Intel Xeon E5-2695v2 2.4Ghz
12Cores • Memory – 256GB• HDD – (5) 4TB Seagate SATA • Network Switch – Cisco Nexus 6001
10GB • NIC – 2port SFP+ 10GbE
MDC Software Specifications• Hadoop – v2.6.0• Yarn – v2.6.0• Apache Apex – v3.0• Linux OS – RHEL v6.7• Linux OS Kernel - 2.6.32-
573.7.1.el6.x86_64
56
Performance Comparison - Redis vs. Apex-HDHT
Apex-HDHT - Thread Local on ~2M eventsStats Percentiles (in ms)
Throughput Count Avg (ms) 90% 95% 99% 99.9% 4 9’s 5 9’s 6 9’s
70k/sec 1,807,283 0.253 1 1 1 2 2 2 2
Apex-HDHT Thread Local on ~54M eventsStats Percentiles (in ms)
Throughput Count Avg (ms) 90% 95% 99% 99.9% 4 9’s 5 9’s 6 9’s
70k/sec 54,126,122 0.19 1 1 1 2 2 5 6
Apex-HDHT No locality on ~2M eventsStats Percentiles (in ms)
Throughput Count Avg (ms) 90% 95% 99% 99.9% 4 9’s 5 9’s 6 9’s
40k/sec 2,214,777 51.651 98 126 381 489 494 495 495
Redis Thread local on ~2M eventsStats Percentiles (in ms)
Throughput Count Avg (ms) 90% 95% 99% 99.9% 4 9’s 5 9’s 6 9’s
8.5k/sec 2,018,057 13.654 16 18 20 21 22 22 22