Upload
heriot-watt-university
View
1.596
Download
0
Embed Size (px)
DESCRIPTION
Slides for a lecture given at the University of Vienna postgraduate course on Toxicology/Science of Chemical Safety (Universitätslehrgang Toxikologie/Chemical Safety für Postgraduierte). See... http://www.meduniwien.ac.at/krebsforschung/research/research-units/chemical-safety-and-cancer-prevention/en/
Citation preview
WORKING FOR A HEALTHY FUTURE
INSTITUTE OF OCCUPATIONAL MEDICINE . Edinburgh . UK www.iom-world.org
Dermal exposure assessment
John Cherrie
2
Outline…
• Measurement methodology• Metals• ISO and CEN standards• Novel approaches
• Schneider et al• Rubber dust and fume
• Inhalation and dermal exposure• Isocyanates and jet fuel (JP-8)
• The effectiveness of protective equipment• Exposure models• Where next?
Health concerns from skin exposure…
• Local effects in the skin• Cancer• Allergic contact dermatitis• Irritant contact dermatitis
• Contribution to systemic exposure
3
Growing interest in dermal exposure…
4
How do we measure?
• Interception (e.g. patches)• The mass of chemical that lands on
the skin over the sampling time (integrated flux)
• Removal (e.g. wipe/wash)• The mass of contaminant left
on the skin
• In-situ (e.g. fluorescence)• The mass of a surrogate
compound retained on the skin
5
Interception sampling…
6
‘Generic’ protocols that prescribe sizes, numbers, location and method of attachment of patches are given by WHO, US-EPA, OECD
Possible to use whole suit, gloves, hood, socks…
“actual” and “potential” exposure
Removal sampling…
7
Removal sampling…
• Hand washing or rinsing• Use water (+surfactant), solvent (e.g. ethanol)• Use of bags to hold the washing liquid• Main limitation is that it can only be used on hands
• Wiping• Moist wipes (commercial hand wipes or manufactured)• Fixed area wiped or whole hands• May require multiple wipes to get acceptable recovery
• Tape stripping• Adhesive tape to remove (successive) layers of stratum
corneum
8
Tape stripping…
• Evaluation of a tape-stripping for measuring dermal exposure to pyrene and benzo(a)pyrene
91.Kammer R, Tinnerberg H, Eriksson K. Evaluation of a tape-stripping technique for measuring dermal exposure to pyrene and benzo(a)pyrene. J. Environ. Monit. 2011.
Tape Glass Skin
Pyrene 97% 88% 70%
Benzo(a)pyrene
93% 76% 63%
Recovery efficiency…
10
Fluorescent tracers…
11
12
European and International “Standards”
• CEN/TC 137 - Assessment of workplace exposure to chemical and biological agents• Workplace exposure - Strategy for the evaluation of
dermal exposure (CEN/TR 15278:2006)• Workplace exposure - Measurement of dermal exposure
- Principles and methods (CEN/TS 15279:2006)
• ISO TC146 SC2 WG8 - Assessment of contamination of skin and surfaces from airborne chemicals• TR 14294 – accepted 3rd May 2011
Dermal exposure to metals…
CaCO3 CaCO3 ZnZn PbPb SbSb NiNi
Source: http://www.herag.net /
13Hughson GW, Cherrie JW. (2005) Comparison of measured dermal dust exposures with predicted exposures given by the EASE expert system. Annals of Occupational Hygiene;49(2):111–123.
14
Schneider et al conceptual model
Surface contamination layer Air compartment
Clothing outer layer
Skin contamination layer
Source
Clothing inner layer
Schneider et al. (1999) Conceptual model for assessment of dermal exposure. Occup Environ Med vol. 56 (11) pp. 765-73.
What we measure…
• Dermal exposure mass (mg)• Dermal exposure loading = Mass loading (mg/cm2) • Mass flux onto the skin (mg/cm2/hr)• Surface area exposed (cm2)• Exposure period (hr)
• However, we don’t measure the concentration of the substance in the skin contamination layer
15Kissel JC. (2010) The mismeasure of dermal absorption. J Expos Sci Environ Epidemiol;21(3):302–309.
Biologically-relevant samplers…
• An interception sampler that mimics the skin• with a diffusion membrane, ideally chosen with similar uptake
characteristics to the skin• adsorbent material• impervious backing
• Prototype IOM dermal sampler
Lindsay FE, Semple S, Robertson A, Cherrie JW. (2006) Development of a biologically relevant dermal sampler. Annals of Occupational Hygiene;50(1):85-94.
16
• NIOSH POD• 5-layer Passive
Organic Dermal sampler
Field trials of the IOM sampler
• Two companies using toluene• Factory A - a specialist printing blankets
and rubber coated fabrics• Factory B - pigment mixing process and
coating process
17
Factory A
18
IOM dermal sampler v ACC
19
IOM sampler v air concentration
2020
Design difficulties…
• Range of membranes tested but none completely suitable• more permeable than skin
• Adsorbent more easily saturated than we would have wished
• Need to correct for air concentration
21
The IOM wet-work sampler and irritation
2222
Time
Threshold
after Malten/van der Walle
Dermatitis
Sub
-clin
ical
Dam
age
The design…
23
• Sensor based on two thermocouples
• Difference in temperature indicates wetness
• Can be used to estimate the duration of wetness and the number of events
Cherrie JW, Apsley A, Semple SE. (2007) A new sampler to assess dermal exposure during wet working. Ann Occup Hyg.;51(1):13-18.
The IOM wet-work sampler…
• The difference between the temperature readings provides an indicator of wet events and duration hands wet
24
Why do we measure dermal exposure?
• Dermal exposure not routinely undertaken to control risk
• Main focus is research• Understanding exposure routes (for health impact
assessments)• Assessing the effectiveness of protective clothing• Epidemiological studies
• Regulatory approval• Under the REACH Regulations• In other regulatory systems
25
The relationship between exposure routes
• Understanding the association between inhalation and dermal exposure is one of the key research issues to be investigated:• How best to control exposure• Whether it is important to have exposure limits
for skin exposure
26
Vermeulen et al (2000)
• Identified the exposure pathways in rubber manufacturing
• They measured…• Air concentration – both near and far-field• Dermal exposure loading
• They showed that…• Hand (wrist) contamination was on average highest• Strong correlation between hand (wrist) and whole
body contamination
Vermeulen R, Heideman J, Bos RP, Kromhout H. (2000) Identification of dermal exposure pathways in the rubber manufacturing industry. Ann Occup Hyg.;44(7):533-541.
27
Different process – different pathways
Curing Pre-treatment
28
Inhalation and dermal exposure…
• Searching Scopus database for entries since 2000• Search query: (inhalation) AND (dermal) AND
(exposure) AND (occupational OR worker)
• 271 papers• Screening on title gave 46 possibly informative
papers• Screening on abstract gave identified about half of
these as uninformative
• Final assessment based on 21 papers
29
Inhalation and dermal exposure
Authors Substance Workplace Corr Comment
Fent et al (2008) HDI Spray painters
0.79 Log transformed data
Day et al (2007) Beryllium Cu-Be alloy plant
0.63
McClean et al (2004) PAH Asphalt workers
0.59 Based on pyrene analysis
Hughson et al (2010) Nickel Various Ni production
0.48 Log-transformed hand data
Sobus et al (2009) PAH Asphalt workers
0.32 Not statistically significant
Cocker et al (2009) MbOCA Polyurethane elastomers
None
Aprea et al (2009) Imidacloprid Greenhouse None
30
Spraying paint…
31
For spraying of low-volatility agents there seems to be a fairly strong association between inhalation and dermal exposurePhoto from Dhmiter Bello
Correlation between measures…
Fent K, Jayaraj K, ball LM, Nylander-French L. (2008) Quantitative monitoring of dermal and inhalation exposure to 1,6-hexamethylene diisocyanate monomer and oligomers. J. Environ. Monit.;10(4):500-507.
Contribution of skin to total exposure…
Authors Substance Workplace % skin
Comment
Borak et al (2002) PAH Creosote impregnation >90%
Aprea et al (2009) Imidacloprid Greenhouse work >78% Est. absorbed dose
Sheenan et al (2008) Benzene Cleaning ≈50% Low levels
Bader et al (2008) NMP Simulation 47% Vapour uptake at rest
Chen et al (2008) PAH Metal machining 37%
Lindsay et al (2006) Toluene Coating work <9%
Kim et al (2007) Jet fuel Fuel cell maintenance 4% PBTK model
Chao et al (2006) Jet fuel Fuel cell maintenance 3%
Xing et al (2011) PCB Recycling 0% Diet main source
Vermeulen (2006) Benzene Shoe manufacture 0%33
Creosote impregnation…
• 34 employees classified into three exposure groups
• Spot urine samples analysed for 1-OHP• Air samples for PAH
1.Borak J, Sirianni G, Cohen H. et al (2002) Biological versus ambient exposure monitoring of creosote facility workers. Occup. Env. Med.;44: 310-319.
34
JP-8 and fuel cell maintenance…
• Personnel in six US Air Force bases
• Dermal tape strip samples for naphthalene
• Air concentration of naphthalene and exhaled breath
• PBTK model
Kim D, Andersen ME, Chao YE, Egeghy PP, Rappaport SM, Nylander-French LA. (2007) PBTK Modeling Demonstrates Contribution of Dermal and Inhalation Exposure Components to End-Exhaled Breath Concentrations of Naphthalene. Environ Health Perspect.;115(6): 894-901.
35
Protective clothing and gloves…
• Measurements made on top of and under clothing, usually with interception samplers
• Biomarker studies with and without the protective clothing
• Search query: (dermal exposure) and ("protective clothing" or gloves) and (effectiveness) - only 13 papers since 2000
• Level of protection may be quite variable• Protection factor may change with the duration
of wearing
36
Protection factor paradign
37
Simulated data
Cherrie JW, Semple S, Brouwer D. (2004) Gloves and dermal exposure to chemicals: Proposals for evaluating workplace effectiveness. Annals of Occupational Hygiene;48(7):607–615.
Modelling exposure…
38
Tools for estimating exposure…
• ConsExpo (by RIVM) • Estimates dermal exposure to consumer products• http://www.rivm.nl/en/healthanddisease/productsafety/ConsExpo.js
p
• ECETOC TRA (Targeted Risk Assessment for REACH), variant of EASE• http://www.ecetoc.org/tra
• RISKOFDERM (TNO, task-based approach relying on similar dermal exposure operation units)
• DREAM (DeRmal Exposure Assessment Method)• Derived from Schneider’s conceptual model• Generates a relative index of exposure
39
Tools for estimating uptake…
• NIOSH Skin Permation Calculator• http://www.cdc.gov/niosh/topics/skin/skinPermCalc.html
• IH SkinPerm• http://www.aiha.org/
insideaiha/volunteergroups/
Pages/EASC.aspx
• Models based on area of skin exposed not mass load
40
Issues with current research…
• Little progress towards measuring biologically relevant exposure
• Little connection between measurement and modelling
• Poor understanding of the effectiveness of PPE• Insufficient collaboration within and between our
constituent research groups• We haven’t really convinced our colleagues of
the importance of dermal exposure measurements
41
News…
• The WHO IPCS will publish an Environmental Health Criteria Monograph (EHC) on Dermal Exposure later this year
• This is a companion to the earlier volume on Dermal Absorption, published 2006
• Slides from this talk will be available at… www.slideshare.net/johncherrie
42