Company Profile

Mamoli SpA specializes in the manufacture and distribution of high-quality, innovative tapware made in Italy. Our products

include faucets, taps, mixers and showers for kitchen and bathroom.

The traditional company with headquarters in Lacchiarella (Milan) stands over a 85 years for the highest quality, functionality

and unique design.

Innovation, research and quality are the key words identifying Mamoli Company’s philosophy.

History BackgroundEighty-five years of powerful evolution and continuous success.

After an initial debut in the lighting and the bathroom fixtures sector in the 1920s,

in 1932 Spartaco Mamoli, the company’s founder, transformed his

entrepreneurial activity into a company and guided it towards the production of

bathroom taps and fittings with a definite emphasis on the technological and

productive innovation.

Since the 1950s, Mamoli products were designed with the capability to

represent the contemporary culture and to respond promptly to the evolution of

home living. The balance between creativity, innovation and production has

enabled the company to propose avant-garde products, such as the “O” series,

with pushbutton panel control, to anticipate the concept of modularity applied to

the bathroom environment and the first taps and fittings with single lever

cartridges.

In the 1960s and 1970s, Mamoli committed to assisting the booming building

development that marked this historical period, with taps and fittings standing

out for both their quality standard and adaptability to the requirements of an

expanding market. In those years was born the wellness system, precursor of

the first thermostatic taps and fittings in the showers environment.

Today Mamoli is under the direction and coordination of Franke Holding, world

leading provider of products and solutions for residential kitchens and

bathrooms. This gives the company the opportunity to open up to a dialog with

the world, offering the quality of its products made in Italy and the unique design.

The wide range and completeness of the current catalogue show that today the

company is a key-player in the sector, capable of satisfying various demands

based on planning principles guided by an aesthetic, functional and

technological research that are constantly updated.

Designing the everyday. Designing water.

This is the approach that Mamoli adopted to ensure its products are always in touch

with people’s here and now and with the company’s vision of the rituality, as well as

the functionality, of the space we call “bathroom”.

And it draws on the company’s history of innovation. Mamoli has observed and has

contributed the evolution of Italian society ever since 1932; not only from an industrial

viewpoint but also in terms of changing lifestyles.

Mission

Mamoli experiences the research as a continuous process of re-interpretation of behavioral, aesthetic and functional models.

Such an approach has prompted Mamoli to identify a path to be followed, wide-open to new responses, in the need for

certainties, in the desire for active stimuli of an environmental nature - architecture, design, forms and materials. The

company’s choices are an expression of its extraordinary capacity to be open to the new.

This is translated into a strong vision of the future: from the development of innovative projects, the result of the association

with top level architects such as Alessandro Mendini, Paola Navone, Paolo Pedrizzetti, Marco Baxadonne.

Design

Mamoli is deeply committed to create products and systems that minimize energy consumption and reduce the wasting of resources

during use, through the employment of innovative technologies and recycled biodegradable cardboard packaging.

The company invests significantly in Research and Development to find new project and production solutions, leading to run products

and processes that respect people and their habitat and devote the maximum attention to the responsible use of resources, conserving

non-renewable energy sources, optimizing production processes and implementing careful planning. This eco-sensitivity has prompted

Mamoli to prepare closed-circuit production plants, where the water used in the galvanic processes is purified and re-used in new

production, and to create an effective process of management and processing of production waste, which is treated in this way to protect

the ecosystem. This attention has prompted the company to make each individual product that comes out of its plants undergo

pneumatic water tightness tests. The air testing mechanism, in fact, makes it possible to match a greater precision in measurement with

a better management of resources, at the same time raising the quality level of products.

Finally, the internal production cycle allows constant monitoring of the processing phases of the product and their compliance with the

terms of standard UNI EN ISO 9001:2008, also respecting the principles of the “made in Italy”.

Sustainability

For Mamoli, design considerations must responsibly take care of consumers’ wellbeing, safety and health: hence the decision to use

exclusively, in production processes, materials that are 100% compatible with drinking water, ACS certified and brass alloys in

compliance with Ministerial Decree 174, with a very low nickel content and a reduced percentage of lead.

Finally, for the manufacture of its products, Mamoli uses avant-garde production technologies such as the PWP [Pure Water Process]

galvanic process, which uses insoluble nickel: this allows a release of nickel that is much lower than the values imposed by the most

stringent international standards (NSF 61 - USA, DWG - Germany, NF - France, 174 - Italy) to guarantee the total healthiness of its

products.

Faced with today’s environmental emergency, Mamoli is committed on the front line in the effort to promote awareness of the issues

associated with environmental sustainability and saving water. To co-working with “H2O - Nuovi scenari per la sopravvivenza” non-profit

association, makes Mamoli the first company in Italy not only to share its intentions and objectives, but also to concretely support its

projects with the joint organization of exhibitions and workshops at showrooms, aiming at stimulating a debate among professionals of

design on the possible new scenarios of architecture and design, in the awareness that a sustainable future must already be built today,

starting with responsible designing.

Commitment

Our ProductsMore and more 'lounge' of welfare, the bathroom, even if of small dimensions, do not give up to the quality and

design. In addition to sanitary, furniture, bath and multifunction box shower, the faucet is not satisfied to be a

simple accessories, but contains a mix of high technology and functionality. Bottles and faucets make precious the

bathroom: distances that grew thinner while sinuous and rounded lines alternate with a precise design and

inspired the future. The materials ranging from hi-tech steel , chromed and satin metal, to match with wood or

glass.

Products designed and intended for an aesthete audience, who loves things that are beautiful and not just

functional.

High Quality

Materials

Design &

Innovation

Quality

Sustainable

Manufacturing

process

The Series

Showroom : Euclide, Fuente, Stylos, Pico, Pico

Joystick, Tool, Ortigia, Chelsea, Belgravia,

Notting Hill, O2, Feel, Cross, Epoca

Professional : Bold, Ellisse, Vip, 3Vip, H2Vip,

Logos, Logos+, Acquachiara, Alfa-Beta

Kitchen: Paola & The Kitchen, Cook, ……