Embed Size (px)
DESCRIPTION
IMW’s CompactCNG includes proven CleanCNG technology in a new compact package, making it small enough to fit into CNG sites of all sizes. It features the efficient IMW compressor, up to 150hp electric drive motor, on skid diverter panel & a high level of serviceability. This economical package makes even small installations possible with its low capital & operating costs and is suitable up to medium size fleets.
Citation preview
Product Overview
IMW’s CompactCNG includes proven
CleanCNG technology in a new compact
package, making it small enough to fit
into CNG sites of all sizes. It features
the efficient IMW compressor, up to
150hp electric drive motor, on skid
diverter panel & a high level of
serviceability. This economical package
makes even small installations possible
with its low capital & operating costs
and is suitable up to medium size fleets.
WHAT IS CompactCNG?
WHY CHOOSE CompactCNG?
FEATURES
Small Skid Footprint
Optional external skid mounting points
Optional vibration isolators which reduce compressors vibration transmission to the
ground
On-skid diverter panel
Flexible design which can be configured as a traditional compressor or a daughter
station compressor
Traditional compressor configurations cover a wide range of suction pressures & flow
rates while utilizing a low HP motor
IMW’s CleanCNG non-lubricated compressor technology
Worldwide support through IMW offices and affiliates
BENEFITS
Suitable for a wide variety of sites
Reduces site space requirements
Protects nearby sensitive equipment and structures with optional vibration isolators
Reduces site installation time and cost
Minimizes shipping costs
Low operating cost with long maintenance intervals and equipment lifetime through
IMW’s CleanCNG technology
Electrical savings throughout the life of the package through low horsepower motors
Minimal oil carryover to the discharge gas
WHY CHOOSE CompactCNG?
TECHNICAL SPECIFICATIONS:
TECHNICAL SPECIFICATIONS:
Configuration Single
Weight 14,000 lbs
Enclosure
dimensions
Top Air Discharge: 10’6”Lx6’11”Wx10”H
Side Air Discharge: 10’6”Lx6’5”Wx7’7”H
Horsepower 50HP (37kW), 100HP (75kW), 150HP (112kW)
Flow Range (Per
compressor) SCFM: 72-427 DGE/h: 30 – 178 Nm³/h: 116 - 686 Sm³/h: 122 - 724
Inlet Pressure Range 5-150 PSIG
Electrical Supply 575 VAC, 60 hz / 480 VAC, 60 hz / 440 VAC, 60 hz / 380 VAC, 50 hz
Discharge Pressure 4500 PSIG, 250bar
Stages 3, 4, or 5
Code Compliance ANSI, ASME, CSA, ISO, NFPA, UL, IEC
CompactCNG 50-150 Small Pilot/Test Project
CompleteCNG 50-150 Mediu
m Garbage Fleet
CleanCNG 150-300 Large Bus Fleet
WHERE DOES CompactCNG FIT?
HP
Why IMW? 5 Exclusive Competitive Advantages
IMW Exclusive Competitive Advantages
ONLY #1: IMW non-lubricated compressors set
the global standard for minimum oil carry-over
in CNG compressors without the waste, cost and
negative environmental issues of additional filters, auto
oil drain systems and supplementary oil tanks. Only 5
parts-per-million or less vs. 100 PPM or more.
Lower operating costs: Oil litres/year: Lubricated
systems= up to 1200 vs. IMW = 80 in crankcase
Lower maintenance costs: no oil accumulation in
compressor or vehicle systems. Happier customers
and increased station profitability.
Inside a CNG vehicle, onboard CNG stored at 3600
psig is regulated to 100 psig by a regulator and then
injected into engine. There are many examples of oil
soaking the regulator diaphragm, affecting its
accuracy and, in some cases, causing a rupture of
the regulator internals if oil clogs the regulator.
The majority of engine performance
issues are attributable to oil carryover,
which is a problem that begins at the
fueling station.
Leo Thomason, Executive Director
Natural Gas Vehicle Institute
“The Achilles Heel of Natural Gas Vehicles”
“
”
#1
IMW Exclusive Competitive Advantages
ONLY #2: IMW is the largest and only exclusive manufacturer of non-lubricated CNG compressors
globally making us a proven manufacturer with the world
class experience you need supporting you
A century of manufacturing experience
3 decades of non-lubricated CNG compressor
manufacturing experience
Sales
Service
#2
IMW Exclusive Competitive Advantages
ONLY #3: The best durability and reliability in the
industry
IMW has the most northerly long term operational
installation in the world in Barrow Alaska, which,
combined with our installations in Qatar demonstrate
reliable commercial operation across more than a
110oC temp range and some of the most abusive
conditions on earth
Gas dryers are installed on low pressure inlet not the
high pressure discharge, keeping IMW compressor
system dry with better chances of not freezing during
the extreme temperatures of winter.
Existing installation in South America still running at
70,000 hours
#3
IMW Exclusive Competitive Advantages
ONLY #4: IMW is the only manufacturer offering
advantages of twin & triple configurations:
Allows for variable supply for higher efficiency at
low demand periods
Full redundancy and enhanced reliability
#4
IMW Exclusive Competitive Advantages
ONLY #5: Only IMW offers a truly single-skid
CompleteCNG solution
Everything is on-board. No additional pads, piping
or electrical needed for:
1. Compressor
2. Dispensers
3. Motor Control Center
4. Priority Panel
5. Buffer Storage Tank
6. Dryer
7. Foundation
#5
43676 Progress Way • Chilliwack, BC • Canada V2R 0C3 p +1 604.795.9491 f +1 604.792.3806 e [email protected]
imw.ca
imw.ca/facebook
imw.ca/linkedin
imw.ca/youtube
43676 Progress Way • Chilliwack, BC • Canada V2R 0C3 p +1 604.795.9491 f +1 604.792.3806 e [email protected]
Dave Orton
d: +1 604.393.7659
m: +1 604.512.0009
