Fiberworks Ultra High Density CWDM Solutions Guide

What is the FiberworksUltra High Density CWDM Solutions?

ULTRA HIGHD E N S I T Y C W D M M U X / D E M U X SO L U T I O N S

PERFORMANCE

AND DESIGNT H A T G O E S B E Y O N D T H E

NEXT LEVEL

Fiberworks is introducing a new, ultra compact CWDM multiplexer solution. This multiplexer is functionally identical to our 8+1-mux. It covers all CWDM channels from 1470 nm to 1610 nm. In addition the ultra compact mux has a 1310 nm wideband upgrade port used for 8 CWDM-channels in the lower band, or existing equipment on 1310nm. The added monitor ports ensures easy troubleshooting without downtime.

You can fit 5 modules in our standard 1U chassis. In a 2U chassis you can fit 12 modules. There is also the possibility of so called «0U mounting», which allows the mux to be mounted outside the rack.

>>> Improved Density

>>> Flexible Configuration

Modular Design <<<

Reduced Installation Time <<<

1

2

3

4

5

UHD 1U 5 SlotModular Chassis

UHD 2U 12Slot Modular Chassis

UHD 1U Sliding/Storage Management

FIBERWORKS UHD8 channel Low band CWDM Mux+DemuxModule

FIBERWORKS UHD8+1 channel CWDM Mux+Demux Module

Fiberworks Ultra High Density System is a small footprint and is perfect for reduced space in high fibre density rack environments.

1. UHD 1U 5 Slots Modular Chassis

2. UHD 2U 12 Slot Modular Chassis

3. Fiberworks UHD CWDM mux+demux Module

Telecom Central/Data Center

Fiberworks UHD CWDM mux+demux Module

UHD 2U 12 Slot Modular Chassis

Ultra Slim Panel

2

1

3

Typical Application Scenario

1U Chassis Feature Overview

Easy Fibre HandlingExtremely high density fibre

port design with new fibremanagement options provide

easy port accessHigh Density

Up to 5 modules in 1U – 40 CWDM channels

Innovative DesignModules provide ultra high density

fibrecapacity – up to 40 CWDM channels in

1U space.PLUS utilising the new design of LC

Quadadaptors means there is no need for

additional extraction tooling

Ultra High Density

2U Chassis Feature Overview

Ultra High Density ComponentsConsisting of new high density chassis, panels,

modules, fanouts, trunks, patch cords and fibremanagement products addressing modern fibre

infrastructure in high density environment

Front DoorPatch cord protection and

labelling position on reverse forclear port identification.

Labelling card included if nofront door is required

Front ManagementVelcro ties for front

management allows easier patch cord routing to the

front of adaptors

High DensityUp to 12 modules in 2U – 96 CWDM

channels

Rear ManagementOptional accessory for

sliding management allows front and rear

management, i.e. trunks and patch cords Part no:

UHD2URMBA

Front and Rear Installation Modules can be securely installed and fixed inside the chassis by an easy access latching mechanism.

Each module can be installed from the front or rear

Ultra High Density

Ultra High Density 12 Module Chassis 19” 2U with Front Door .

Part Number: UHD-2UFD

Ultra High Density 1U Sliding Management Tray.

Part Number: UHD-SLMAN01

2U Rear Management Bar Accessory side brackets included only when purchased without a chassis.

Part Number: UHD-IM2U03

1U and 2U Ultra High DensityChassis System and Accessories

Ultra High Density 5 Module Chassis 19” 1U with Front Door and Rear Management.

Part Number: UHD-1UFDRM

Ultra High Density 1U Front ManagementBar.

Part Number: UHD- 1UCABLEBAR01

Ultra High Density Installation Kit, 0 Module.

Part Number: UHD-2UFD

Ultra High DensityUp to 5 Modules in 1U

Up to 12 Modules in 2U

Secure Mounting MechanismModule is securely fixed inside the panel to

install patch cords

Fiberworks Ultra High Density CWDM ModulesFeature Overview

Part Number: U-CMUX-8+1-4761-MLU

Fiberworks Ultra High Density 8+1 CWDM Mux+Demux ModuleWith Monitor Ports

FEATURES

Ultra compact - 5 modules fit in 1U in 19" rack Coarse WDM in compliance with ITU-T G.694.2 8 CWDM channels 1470 nm – 1610 nm with 20 nm spacing 1310 nm wideband/upgrade port Two 2% monitor ports for easy troubleshooting Based on thin film optics with epoxy free optical path Protocol transparent (support 1G, 10G etc.) LC/UPC connectors

DESCRIPTION

This ultra compact CWDM multiplexer/demultiplexer covers the 8 most commonCWDM channels. Its 1310 nm wideband port can be used for legacy 1310 nm equipment or 8 more CWDM channels in the lower band. Monitor ports ensures easy troubleshooting without downtime and the color coding helps in the installation process reducing the chance of errors.

Fiberworks Ultra High Density 8 channels CWDM Mux+Demux Module,Low Band C29-C43, LC/UPC

FEATURES

DESCRIPTION

Part Number: U-CMUX+8-LB2943-LU

Ultra compact - 5 modules fit in 1U in 19" rack Coarse WDM in compliance with ITU-T G.694.2 8 CWDM channels 1290 nm – 1430 nm with 20 nm spacing To be used standalone or together with CMUX-8+1 to create a 16-

channel system Based on thin film optics with epoxy free optical path Protocol transparent (support 1G, 10G etc.) LC/UPC connectors

This compact CWDM multiplexer/demultiplexer covers the 8 CWDM channels in the lower 1310 nm band. Together with the F-CMUX-8+1 it creates a 16-channel CWDM system. The color coding helps in the installation process reducing the chance of errors.

Ryensvingen 15, N-0680 Oslo - NorwayTel: +47 23035330E: salg@fiberworks.nowww.fiberworks.eu