12
Product Training

Sundew farm axe 2013_new

Embed Size (px)

Citation preview

Page 1: Sundew farm axe 2013_new

Product Training

Page 2: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Sundew SolutionsA Family Company

100% Australian Owned and Operated.

Page 3: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

The original Solfac was an EW with 50 g/L cyfluthrin

It was improved by an SC formulation using beta-cyfluthrin, but at only 25 g/L was half the strength of the original and lacked ‘punch’ as a residual spray.

FarmAXE uses the improved beta-cyfluthrin SC formulation, but at 2.5 times the strength of the original Solfac product, it has EXCELLENT and superior residual control

Beta cyfluthrin evolution

Page 4: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

• Super concentrate 125 SC • Beta cyfluthrin – great all rounder!• Mix rate of 4 mL/L water• Makes 25 L of mixed full strength spray• Unique Controlled Particle Technology• Unique Transigel Rheology System• Broad spectrum - Indoors and outdoors• No stain, no odour• Long residual activity (up to 12 months indoors)• High profit margin for reseller!!• Handy counter top point of sale shipper of

12 units targeting ‘impulse/up-sell’ audience

Page 5: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Unique to Sundew Solutions

Page 6: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Controlled Particle Technology (CPT) offers the perfect bi-modal blend of tiny submicron particles that have

been shown to give a rapid knockdown with a complement of larger particles which provide excellent

residual control on even the most porous surfaces.

This gives the best all-round performance on the market – fast acting on the largest range of surfaces.

Page 7: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Transigel Rheology System (TRS) has been scientifically developed so that our products won’t ever sediment in their original containers, and the uniquely low viscosity of our product once flowing gives you the best dilution properties on the market.

No other pest control product in the world uses our unique patented thickener package which is responsible for these amazing properties.

Page 8: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

• Sedimentation

• Product separation

POOR RHEOLOGY

48% of active stuck to bottom of bottle.

46% of active settles to bottom within 30 minutes.

Page 9: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Unique to Sundew Solutions

CPT™ and TRS™ were developed specifically for FarmAXE to give a ‘competitive’ and ‘technical’ advantage over all other products currently available in the Australian market place.

FarmAXE was designed from the ground up to meet the needs of today's modern users.

Basically, in a nutshell, FarmAXE is a superior formulation to give you superior results.

Page 10: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

SITUATION RATE PEST CRITICAL COMMENTSMeatworks (non-product areas), farm buildings, food processing establishments, shops, offices, factories, storerooms, hospitals, schools, barracks, houses, ships, rubbish tips

On non-porous surfaces, apply at a rate of 5 L of prepared spray per 100 m2 not exceeding the point of run-off.On porous surfaces or for use through power equipment, apply at a rate of 10 L of prepared spray per 100 m2 not exceeding the point of run-off.

Initial or cleanout rate

4 mL/LMaintenance rate

2 mL/L

Cockroaches Conduct a thorough inspection and apply spray to known and potential cockroach harbourages. A barrier spray around areas where cockroach infestations may be originating is also suggested. Repeat application as required. Where application of a spray is not suitable, it is recommended that a registered cockroach gel be used.

Web spinning spiders Spray spiders, their webbing and areas where spiders may hide. Leave webbing in place for a few days to optimise efficacy.

Non-web spinning spiders Spray areas where spiders are known to occur.

Ants Where possible, locate the nest and spray directly into nest entrances. Penetration of insecticide can be assisted by pre-wetting sandy and porous soils with water. A thorough soaking treatment with insecticide mixture is required to destroy the nest. If nest cannot be located then spray infested areas.

Fleas Clean or vacuum infested areas and dispose of the collected dust in the garbage in a sealed plastic bag. Lightly spray all infested areas concentrating under furniture, etc. Treat pets with a registered flea control product. See note on application to carpets.

Flies and mosquitoes Spray surfaces where flies and mosquitoes are known to come to rest. Flies – include external surfaces that are exposed to the morning sun. Mosquitoes – spray walls, awnings, fences and vegetated areas near buildings.Note: the perception of the level of control of flying insects achieved within any given area treated with a residual surface spray will be affected by the extent of migration of individuals from external untreated areas. A residual spray will only control those insects that alight on the treated surfaces and therefore complete elimination of flying insects from the treated area should not necessarily always be expected.

Silverfish Spray areas of potential and existing infestations eg under skirting boards and furniture where dark conditions may favour silverfish populations. If spraying inside cupboards or storage areas, remove clothing and utensils, etc before spraying.

Clothes moths Spray surfaces in areas where clothes are stored. DO NOT spray the clothes.

Carpet beetles Apply to infested carpets, particularly in areas of little or no traffic and underneath windows where adult beetles may be entering the building. See note on application to carpets.

Bed bugs Apply to the bed frame and walls, cracks, crevices and skirting boards in the vicinity of the bed.Stored product pests The use of this product for the control of stored product pests should be considered part of an integrated strategy

to prevent development of insect populations. Best results will be obtained where good hygiene is maintained. Infested areas should be cleaned prior to application and regularly cleaned thereafter to reduce food sources for pests. When treating for beetle pests, pay special attention to sheltered areas such as cracks and crevices, under furniture and equipment, floors, walls and shelves. Adult moths can be controlled by spraying walls and surfaces where the flying moths come to rest.

Rubbish tips Knockdown spray1 mL/2 L

Flies Spray surfaces of rubbish. Apply 200-300 mL of spray/m².

Page 11: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

Where to use FarmAXE:• Indoor and outdoors• Around the house, farm, shed, storage,

shop, factory, restaurant, school, intensive animal housing, rural home pest, etc.

• As used by professional pest managersImportant notes:• Mixed with water FarmAXE is an odour-

free spray solution and is effective on even the most difficult surfaces

Page 12: Sundew farm axe 2013_new

P R O F E S S I O N A L S O L U T I O N S

If you have any questions in relation to this product or any others please

contact David Priddy on email [email protected] or

call 0418 271 193

Thank you for your attention and interest in

this product presentation.