Upload
netgear-italia
View
728
Download
2
Embed Size (px)
Citation preview
M4200 & M4300 Intelligent Edge
Product Presentation
Formazione Online
Andrea RossiSenior System Engineer
Introducing M4200 and M4300 Series
• Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment
• Stackable 10G and 1G Switches with Full PoE+ for Resilient, Spine and Leaf, Edge to Core Connectivity
M4200
M4300
M4200 Intelligent Edge Series
Managed, Multigigabit Switch
3
Industry Trends
• The default design standard for E-Rate
WLAN deployments in the US is now
Wave 2 11ac – global trend worldwide
• WLAN access point deployment is top
reason for network upgrade for more
than five years now
• More connections per access point
combined with faster throughput will
push 1 Gigabit wired connections to
the limit
• Multi-Gigabit wireless – need for higher
throughput in core network
Enter “multi-gigabit” switching.
Enter the unrivalled ProSAFE M4200 Series.
802.11ac Wave 2 Wi-Fi
NETGEAR Multigigabit to the rescue
Wave 2 11ac and MultigigabitEthernet
Before
802.11ac Wi-Fi Access Point
< 1.3 Gbps Wireless Throughput
< 15.4W 802.3af1 Gigabit Per Second
1000BASE-T RJ45
Wave 2 11ac and MultigigabitEthernet
After
802.11ac Wave 2 Wi-Fi Access Point
Up to 2.34 Gbps Wireless Throughput
30W 802.3at2.5 Gigabit Per Second
2.5G NBASE-T RJ45
What is NBASE-T Multi-Gigabit Ethernet
+ Addressing Gigabit bottleneck problem• >75% of WW installed base is CAT5e / CAT6 up to 100 meters (BSRIA NGEABT IEEE Jan 2015 data)
• 10GBASE-T cannot work over vast majority of installed base
• New CAT6a (or better) cable run can reach $300 per cable including labor
• 10GBASE-T can’t be the solution for Wave 2 access point deployments
+ Why would you deploy Wave 2 access points if you won’t be able to adequately support them with your current network?
+ Multi-Gigabit is a game changing innovation• Enables 2.5 and 5Gbps up to 100m on legacy CAT 5e and CAT6 cables
• Backward compatible with 1G – and even Fast Ethernet
• 1000BASE-T IEEE standard compliant
Eight full power PoE+ and multi-speed 1G, 2.5G ports
combined with two 10G uplinks for a fully non-blocking
deployment of eight Wave 2 11ac access points from any
vendor. Plenum rated, slim design and mounting accessories
allow for access point placement optimization and
cabling efficiency.
+ The M4200 is the world’s first 8x2.5G Multi-Gigabit switch* with full PoE+ provision on all ports and 2x10G line-rate aggregation to the wiring closet
+ NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions
M4200-10MG-PoE+
*NBASE-T compliant (upcoming IEEE 802.3bz standard)
ProSAFE® M4200 Intelligent Edge SeriesFull Power PoE+ 8x2.5G and 2x10G Aggregation Switch For Wave 2 11ac AP Deployment
M4200-10MG-PoE+(GSM4210P)
8 x 2.5G Full Power PoE+ 240W
2 x 10G Line-Rate Aggregation
Designed from the ground up to optimize the installation of Wave 2 11ac access points.
Fully non-blocking deployment of eight Wave 2 11ac access points from any vendor.
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port
FRONT SIDE MANAGEMENT
Model name1G / 2.5G
BASE-T
RJ45
1G / 2.5G / 5G
BASE-T
RJ45
10GBASE-X
FIBER
SFP+
PSU FansOOB
ConsoleModel number
M4200-10MG-PoE+ 6 ports
PoE+
100M; 1G; 2.5G
2 ports
PoE+
100M; 1G; 2.5G; 5G
2 ports
1G; 10G
Internal Fixed28.9dB
Side-to-side
Ethernet: Out-of-band 1G port (Front)
Console: RJ45 RS232 (Front)
Console: Mini-USB (Front)
Storage: USB (Front)
GSM4210P
8 ports PoE+ with 240W PoE Budget
90Gbps Fabric (all 6-port 2.5G / 2-port 5G / 2-port 10G are line-rate)
Whisper quiet ,
below normal offices
ambient background noise
M4200 Hardware Highlights
Rack-mounting kit
Locking Mount for
attachment to a wall, round
or rectangular pole (hose
clamps, rubber belts)
Power cord
strap and lock
Secure placement and cabling efficiency
above drop-down ceilings, in air passage
ways and where other switches will not go.
M4200 Software Highlights
LAYER 3 PACKAGE
Model Name Management
IPv4 / IPv6
ACL and QoS,
DiffServ
IPv4 / IPv6
Multicast
Filtering
IPv4 / IPv6
Policing and
Convergence
Model
number
M4200
series
Out-of-band; In-bandWeb GUI; HTTPsCLI; Telnet; SSH
SNMP read/write, MIBsRSPAN
Ingress
1 Kbps shapingTime-based
Single Rate Policing
IGMPv3 MLDv2 Snooping
IGMPv1,v2 and MLDv1 Snooping Querier
Control Packet Flooding
Auto-VoIPAuto-iSCSI
LLDP-MED
GSM4210P
Spanning Tree
Green EthernetVLANs
Trunking
Port Channel
IPv4 / IPv6 Authentication
Security
STP, MTP, RSTP
PV(R)STP* (eq. PVST+)
BPDU/STRG Root Guard
EEE (802.3az)
Static (Access, Trunk ports)Dynamic, Voice, MAC
GVRP/GMRP
QinQ,
Private VLANs
Static. Dynamic (LACP)
Seven (7) L2/L3/L4 hashing algorithms
Successive Tiering(DOT1X MAB Captive
Portal)
DHCP Snooping
IPv4: Dynamic ARP Inspection
IPv4 / IPv6
Static Routing
IPv4
Dynamic RoutingSFlow SDN
IPv4/IPv6 Port, Subnet, VLAN routing
DHCPv4 Relay;DHCPv4 Server
RIP v1, v2
SFlow agent
Permitting external network traffic analysis (NMS300 or any other NMS systems)
OpenFlow 1.3 agent
Support for any SDN Controller (OpenDaylight)
and OVS 2.3.0
* CLI only
M4200 Performance HighlightsTABLE SIZE
Model
NameCPU Fabric Speed Packet Buffer Throughput
Model
number
M4200
series
800Mhz
1GB RAM
256MB Flash
90Gbps 16Mb 66.9Mpps
GSM4210P
ACLs LatencyMAC; ARP/NDP;
VLANsApplication Route Scaling
50 ACLs
512 rules per list
16K ACL rules
(ingress)
<2.8µs 1G RJ45
<1.94µs 10G SFP+
16K MAC
1K ARP/NDP
1K VLANs
Static: 32v4 32v6
RIP: 32v4
Multicast IGMP
Group MembershipDHCP sFlow
1K
DHCP Server:
2K leases
IPv4: 256 pools
10 samplers
10 pollers
8 receivers
Wave 2 11ac Access Point Deployment
This redundant topology allows for wire-speed 8x2.5G wireless access layer, with PoE+ full provisioning
8 x 2.5G 2x10G fully non-blocking deployment
Line-Rate Core and Distribution Layers…
Application: Optimizing Wave 2 Deployment
… For a Truly Wire-Speed Wireless Wave 2 Access Layer
M4300 Intelligent Edge Series
Managed Switches
18
Industry Trends
• Server virtualization –
high bandwidth network
connection and high availability
• IP convergence –
video and voice unified
communications, computing and
storage converging on single
infrastructure
• Multi-Gigabit wireless –
need for higher throughput in core
network
Enter the unrivalled ProSAFE M4300 Series.
Edge to core stacking
NETGEAR leaf-spine to the rescue
1G and 10G virtual chassis platform with 10G stacking
designed for mid-enterprise edge and SMB core deployments.
The M4300 series scales from 24x1G to 48x10G,
and up to 384 ports per stack. Nonstop forwarding,
spine and leaf, edge to core connectivity for unified wired
and wireless networks.
+ The M4300 is the world’s first versatile, stackable solution designed for full power PoE+ edge, redundant Top of Rack server / storage interconnect, and dependable SMB core deployment
+ Non-stop switching, non-stop routing with stack master hitless failover for high availability
+ 1+1 PSU redundancy or load sharing (full width models)
+ Unique half-width 10G models for 1U active-active server installations
M4300 10G and 1G models
ProSAFE® M4300 Intelligent Edge SeriesStackable 10G and 1G L3 Managed Switches with Full PoE+ Provisioning
Multiple stacking topologies with industry-leading nonstop forwarding M4300 10G and 1G Models
ProSAFE® M4300 Intelligent Edge SeriesStackable 10G and 1G L3 Managed Switches with Full PoE+ Provisioning
Model Name M4300-8X8F M4300-12X12F M4300-24X24F M4300-28G M4300-52G M4300-28G-PoE+ M4300-52G-PoE+
Model Number XSM4316S XSM4324S XSM4348S GSM4328S GSM4352S
GSM4328PA
(550W PSU)
GSM4328PB
(1,000W PSU)
GSM4352PA
(550W PSU)
GSM4352PB
(1,000W PSU)
10/100/1000 RJ45 - - - 24 ports 48 ports 24 ports PoE+ 48 ports PoE+
10GBASE-T RJ45 8 ports 12 ports 24 ports 2 ports 2 ports 2 ports 2 ports
1G/10G SFP+ 8 ports 12 ports 24 ports 2 ports 2 ports 2 ports 2 ports
Form Factor Half-width 2-unit 1U Half-width 2-unit 1U Full width 1-unit 1U Full width 1-unit 1U Full width 1-unit 1U Full width 1-unit 1U Full width 1-unit 1U
Switching Fabric 320 Gbps 480 Gbps 960 Gbps 128 Gbps 176 Gbps 128 Gbps 176 Gbps
Power Supply Modular 1 bay Modular 1 bay Modular 2 bays Modular 2 bays Modular 2 bays Modular 2 bays Modular 2 bays + RPS
Included PSU (1) APS250W (1) APS250W (1) APS250W (1) APS150W (1) APS150W
GSM4328PA:
(1) APS550W
GSM4328PB:
(1) APS1000W
GSM4352PA:
(1) APS550W
GSM4352PB:
(1) APS1000W
Fans Front-to-back Front-to-back Front-to-back Front-to-back Front-to-back Front-to-back Front-to-back
Acoustic Noise 36.9dB @25°C 36.9dB @25°C 35.8dB @25°C 30.3dB @25°C 31.5dB @25°C 39.8dB @25°C 39.8dB @25°C
Max Power
Consumption49 Watts 97 Watts 161 Watts 34.5 Watts 47.4 Watts
GSM4328PA: 797W
GSM4328PB: 833.2W
GSM4352PA: 865W
GSM4352PB: 1,628W
PoE+ Budget
@ 110V AC in
With 1 PSU, or 2 PSUs ‘Redundant’PA Version 480 Watts 480 Watts
PB Version 630 Watts 591 Watts
With 2 PSUs in ‘Shared’ ModePA Version 720 Watts 720 Watts
PB Version 720 Watts 1,010 Watts
@ 220V AC in
With 1 PSU, or 2 PSUs ‘Redundant’PA Version 480 Watts 480 Watts
PB Version 720 Watts 860 Watts
With 2 PSUs in ‘Shared’ ModePA Version 720 Watts 720 Watts
PB Version 720 Wats 1,440 Watts
Management Ethernet: Out-of-band 1G port Console: RJ45 RS232 and Mini-USB ports Storage: USB port
M4300 Software Highlights
LAYER 3 PACKAGE
Model Name Management
IPv4 / IPv6
ACL and QoS,
DiffServ
IPv4 / IPv6
Multicast
Filtering
IPv4 / IPv6
Policing and
Convergence
Model
number
M4300
series
Out-of-band;Web GUI; HTTPsCLI; Telnet; SSH
SNMP, MIBs, RSPAN
Radius Users, TACACS+
Ingress / Egress
1 Kbps shapingTime-based
Single Rate Policing
IGMPv3 MLDv2 Snooping, Proxy
ASM & SSM
IGMPv1,v2 Querier
Control Packet Flooding
Auto-VoIPAuto-iSCSI
Policy-based routing (PBR)
LLDP-MED
XSM43xx
GSM43xx
Spanning Tree
Green EthernetVLANs
Trunking
Port Channel
IPv4 / IPv6 Authentication
Security
STP, MTP, RSTP
PV(R)STP* (eq. PVST+)
BPDU/STRG Root Guard
EEE (802.3az) **
Static (Access, Trunk ports)Dynamic, Voice, MAC
GVRP/GMRP
QinQ,
Private VLANs
Distributed LAG across the stack
Static or Dynamic LACP
Seven (7) L2/L3/L4 hashing algorithms
Successive Tiering(DOT1X; MAB; Captive
Portal)
DHCP SnoopingDynamic ARP Inspection
IP Source Guard
IPv4 / IPv6
Static Routing
IPv4 / IPv6
Dynamic RoutingSFlow SDN
Port, Subnet, VLAN routing, DHCP Relay;
Multicast static routes;
Stateful DHCPv6 Server
IPv4: RIP, VRRP
IPv4/IPv6: Enhanced OSPF,Proxy ARP,
PIM-SM PIM-DM,6-to-4 tunnels
SFlow agent
Permitting external network traffic analysis (NMS300 or any other NMS systems)
OpenFlow 1.3 agent
Support for any SDN Controller (OpenDaylight)
and OVS 2.3.0
* CLI only ** Future Firmware upgrade
M4300 Performance Highlights
TABLE SIZE*
Model
Name
MAC
ARP/NDP
Routing /
Switching
Capacity
Through
put
Application
Route
Scaling
Packet
BufferLatency
IP Multicast
Forwarding
Entries
Multicast
IGMP Group
Membership
CPU VLANs DHCP sFlowModel
number
M4300-
24X24F
128K
MAC
8K
ARP/NDP
960 Gbps
Line-rate
714
Mpps
Static:
64v4/64v6
RIP: 512
OSPF:
12,000
56Mb
64-byte
frames
<2.39µs
10G RJ45
<0.88µs
10G SFP+
1,024 IPv4
512 IPv6
2K IPv4
2K IPv6
CPU 800Mhz
1GB
RAM
256MB
Flash
4K
VLANs
DHCP
Server:
2K
leases
IPv4:
256
pools
IPv6:
16
pools
416
samplers
416
pollers
8
receivers
XSM4348S
M4300
other
models
16K
MAC
2K
ARP/NDP
Up to 480
Gbps
All models
Line-rate
Up to
357
Mpps
Static:
64v4/64v6
RIP: 512
OSPF: 512
M4300-
12X12F:
32Mb
All
others:
16Mb
M4300-
8X8F:
<2.43µs
10G RJ45
<0.89µs
10G SFP+
M4300-
28Gxxx:
<2.74µs
10G RJ45
<1.96µs
10G SFP+
All others:
<2.76µs
10G RJ45
<1.24µs
10G SFP+
96 IPv4
32 IPv6
All
other
models
* For mixed stacking between more capable devices and less capable devices, SDM mixed stacking template is used based on
“least common denominator” set of capacities and capabilities
M4300-24X24F(XSM4348S)
48-port 10G for
most intensive
virtualization
and backbone
operations M7100-24X
(XSM7224)
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port
24 x 10GBASE-T
24 x SFP+
Second PSU bay for 1+1 power redundancy
960Gbps Fabric
128K MAC
12K IP Routes
Full Layer 3
M7300-24XF
(XSM7224S)
24 x 10GBASE-T Layer 2+
24 x SFP+ Layer 2+ (Layer 3 license upgrade)Replacement
M4300-12X12F(XSM4324S)
24-port 10G
half-width
for redundant
top-of-rack
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port
12 x 10GBASE-T
12 x SFP+
480Gbps Fabric
16K MAC
512 IP Routes
Full Layer 3One modular PSU bay
M4300-8X8F(XSM4316S)
16-port 10G
half-width
for redundant
top-of-rack
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port
320Gbps Fabric
16K MAC
512 IP Routes
Full Layer 3One modular PSU bay
8 x 10GBASE-T
8 x SFP+
A Redundant Top-of-Rack Installation, With Two Fabrics
Better than a (single) 10G switch
point of failure
M4300 10G Models: Low Acoustic Noise
The Industry’s quietest
10G switches ever
Acoustic noise
(ANSI-S10.12)
@ 25 °C
ambient
(77 °F)
M4300-8X8F 16-port 10G 36.9 dB
M4300-12X12F 24-port 10G 36.9 dB
M4300-24X24F 48-port 10G 35.8 dB
M4300-28G(GSM4328S)
4-port 10G
for stacking
and redundant
uplinks to
the core M5300-28G3
(GSM7328S)
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port 2 x 10GBASE-T
2 x SFP+
Second PSU bay for 1+1 power redundancy
M5300-28G
(GSM7228S)
24x1G 2x10G combo 2x10G modular bays
Layer 3
24x1G 2x10G combo 2x10G modular bays
Layer 2+ (Layer 3 license upgrade)Replacement
128Gbps Fabric
16K MAC
512 IP Routes
Full Layer 3
M4300-52G(GSM4352S)
4-port 10G
for stacking
and redundant
uplinks to
the core
Gigabit Management Port (OOB)
Mini-USB and Serial RJ45 Console
USB Storage Port 2 x 10GBASE-T
2 x SFP+
Second PSU bay for 1+1 power redundancy
176Gbps Fabric
16K MAC
512 IP Routes
Full Layer 3
M5300-52G3
(GSM7352S)
M5300-52G
(GSM7252S)
48x1G 2x10G combo 2x10G modular bays
Layer 3
48x1G 2x10G combo 2x10G modular bays
Layer 2+ (Layer 3 license upgrade)Replacement
M4300-28G-PoE+(GSM4328PA and PB)
Power
redundancy
and PoE+ full
provisioning
M5300-28G-PoE+
(GSM7228PS)
2 x 10GBASE-T
2 x SFP+
Second PSU bay for 1+1 power redundancy
or EPS share mode
24x1G PoE+ 2x10G combo 2x10G modular bays
Layer 2+ (Layer 3 license upgrade)
Replacement
380W PoE budget
RPS port for external 1+1 protection
EPS: 720W with external RPS4000
GSM4328PA 480W PoE budget with 1 included PSU (APS550W)
and up to 720W w/ 2 PSU in share mode
GSM4328PB 630W (720W w/ 220V AC input) w/ 1 included PSU (APS1000W)
and up to 720W w/ 2 PSU in share mode
M4300-52G-PoE+(GSM4352PA and PB)
Power
redundancy
and PoE+ full
provisioning
M5300-52G-PoE+
(GSM7252PS)
2 x 10GBASE-T
2 x SFP+
Second PSU bay for 1+1 power redundancy
or EPS share mode
48x1G PoE+ 2x10G combo 2x10G modular bays
Layer 2+ (L3 license upgrade)
Replacement
380W PoE budget
RPS port for external 1+1 protection
EPS: 1,440W with external RPS4000
GSM4352PA 480W PoE budget with 1 included PSU (APS550W)
and up to 720W w/ 2 PSU in share mode
GSM4352PB 591W (860W w/ 220V AC input) w/ 1 included PSU (APS1000W)
and up to 1,010W (1,440W w/ 220V AC input) w/ 2 PSU in share mode
RPS port for external 2+1 redundancy when
2 internal PSUs are used in share mode
Target Applications
Building 1: High Availability (HA) Top-of-Rack
• For midsize server installations, two half-width M4300
10GbE models can be paired in a single rack space for
redundant top-of-rack
• Compared with single top-of-rack switch installation, such
two-unit horizontal stacking is cost-effective yet highly
efficient for HA
• Management unit hitless failover and nonstop forwarding
ensure no single point of failure for servers and storage
Building 2: Edge Ring Stack
• Common for intermediate distribution frames (IDF) in K-12
and other large campuses, stacking topologies greatly
simplify deployments at the edge
• While reducing the number of logical units to manage,
stacking also brings network resiliency with distributed
uplinks in aggregation to the core
• Management unit hitless failover and nonstop forwarding
ensures continuous uptime for clients across the stack
Building 3: Spine and Leaf Stack
• For typical collapsed core installations, with a variety of 1G
and 10G access ports in branch offices, server rooms or
campus high performance labs
• M4300 10G models can stack with M4300 1G models,
enabling innovative "spine and leaf" topologies
• Spine and leaf architectures deliver highest performance
with every leaf switch (1G) connecting to every spine switch
(10G) for a fully non-blocking deployment
• With management unit hitless failover and nonstop
forwarding, leaf switches keep forwarding L2 and L3 traffic in
and out, while backup spine unit guarantees connectivity to
the core
Continuous uptime for clients across the stack
K12 PoE deployment at the edge
What’s the most important distinction?
It’s non-stop switching,
non-stop routing
stacking technology.
Server installations
Again, same distinction:
Spine and Leaf Topologies
Reducing oversubscription or enabling line-rate aggregation to the spine
M61001G 10G
Chassis L3
M4200Multigigabit
L3
M43001G 10G
Stackable L3
M410010/100 1G
Standalone L2+
MANAGED
SWITCH
PORTFOLIO
Competitive Analysis
• Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment
Looking to…
11ac solution?
Let’s talk about
switching…
M4200
NETGEAR
M4200-10MG-PoE+
CISCO 3560-CX
-8XPD-S
CISCO WS-C3850-
12X48U-S
CISCO WS-C3850-
24XU-S
Feature Set IPv4/IPv6 Layer 3 Lite IPv4/IPv6 Full Layer 3 IPv4/IPv6 Full Layer 3 IPv4/IPv6 Full Layer 3
Port Count8x2.5G 2xSFP+ 6x1G 2x2.5G 2xSFP+ 36x1G 12x2.5G
Optional 4xSFP+ or 8xSFP+
24x2.5G
Optional 4xSFP+ or 8xSFP+
Multigigabit 8-port 2.5G incl. 2-port 2.5G/5G 2-port 2.5G incl.5G/10G 12-port 2.5G incl.5G/10G 24-port 2.5G incl.5G/10G
Line-Rate
Aggregation8x2.5G and 2x10G line-rate
aggregation to the wiring closet
2x2.5G only, line-rate with
2xSFP+ uplinks
12x2.5G only, line-rate when
3xSFP+ uplinks
24x2.5G only, line-rate when
6xSFP+ uplinks
PoE 8-port PoE+ 240W full power 8-port PoE+ 240W 48-port UPOE 630W
1,440W with 2nd 1,110W PSU
24-port UPOE 580W
1,440W with 2nd 1,100W PSU
Table Size16K MAC 64 IP Routes
1K VLANs
8K MAC 400 IP Routes
1K VLANs
32K MAC 24K IP Routes
4K VLANs
32K MAC 24K IP Routes
4K VLANs
Switching Fabric Line-Rate 90Gbps Line-Rate 92Gbps Line-Rate 640Gbps Line-Rate 472Gbps
Form Factor Plenum rated, slim design Compact Catalyst Switch Rack Mount only Rack Mount only
Mounting
Accessories
Standard: Rack mount kit and
Mount with locking tab for walls and
poles (rectangular or round)
Optional: Rack mount kit
and various mounting trays
sold separately
Rack mount kit only Rack mount kit only
SDN-Ready YES / OpenFlow 1.3
Cisco Application Policy
Infrastructure Controller
Enterprise Module
Cisco Open Network
Environment
Cisco Open Network
Environment
Layer 2 Auto-iSCSI MAC-Sec Mobility Controller, uRPF Mobility Controller, uRPF
Layer 3 Static routing and RIPStatic, RIP, OSPF, PBR
[IP base image]
Static, RIP, OSPF, PBR
[IP base image]
Static, RIP, OSPF, PBR
[IP base image]
NETGEAR
Differentiation
Designed from the ground up to optimize the installation of Wave 2 11ac access points:• Optimizing Access Point Placement and cabling efficiency with slim, quiet design and mounting accessories
• Fully Non-Blocking For Wave 2 AP with 8x2.5G to the 11ac AP and 2x10G line-rate aggregation to the wiring closet
• Full PoE+ Provision Across All Ports Multigigabit Ethernet and compatible with most major wireless/switching vendors
Optimizing Wave 2 11ac APs Placement
NETGEAR
M4200-10MG-PoE+
Aruba 3810 Series Aruba 5400R
Chassis Series
Aruba 5400R
Chassis Series
Feature Set IPv4/IPv6 Layer 3 Lite IPv4/IPv6 Full Layer 3 IPv4/IPv6 Full Layer 3 IPv4/IPv6 Full Layer 3
Port Count8x2.5G 2xSFP+ JL076A 40x1G 8x2.5G
Optional 4xSFP+
J9991A 20x1G 4x2.5G
Optional other 10G blade
J9995A 8x2.5G
Optional other 10G blade
Multigigabit 8-port 2.5G incl. 2-port 2.5G/5G 8-port 2.5G incl.5G/10G 4-port 2.5G incl.5G/10G 8-port 2.5G incl.5G/10G
Line-Rate
Aggregation8x2.5G and 2x10G line-rate
aggregation to the wiring closet
8x2.5G, line-rate with
2xSFP+ uplinks
Requires a 10G blade for
4x2.5G line-rate 10G uplink
Requires a 10G blade for
8x2.5G line-rate 2x10G uplinks
PoE 8-port PoE+ 240W full power48-port PoE+ 720W
1,440W with 2nd PSU
Up to 4,500W with modular
PSUs
Up to 4,500W with modular
PSU
Table Size16K MAC 64 IP Routes
1K VLANs
64K MAC 10K IP Routes
4K VLANs
64K MAC 10K IP Routes
4K VLANs
64K MAC 10K IP Routes
4K VLANs
Switching Fabric Line-Rate 90Gbps Line-Rate 508GbpsLine-Rate 64Gbps backplane
access per half-width blade
Line-Rate 64Gbps backplane
access per half-width blade
Form Factor Plenum rated, slim design Rack Mount only 4U or 7U Chassis Switch 4U or 7U Chassis Switch
Mounting
Accessories
Standard: Rack mount kit and
Mount with locking tab for walls
and poles (rectangular or round)
Rack mount kit only Rack mount kit only Rack mount kit only
SDN-Ready YES / OpenFlow 1.3 YES / OpenFlow 1.3 YES / OpenFlow 1.3 YES / OpenFlow 1.3
Layer 2 Auto-iSCSI AirWave ZTP, MAC-Sec ClearPass Policy, MAC-Sec ClearPass Policy, Mac-Sec
Layer 3 Static routing and RIPStatic, RIP, VRRP, OSPF,
PBR, BGP
Static, RIP, VRRP, OSPF,
PBR, BGP
Static, RIP, VRRP, OSPF, PBR,
BGP
NETGEAR
Differentiation
Designed from the ground up to optimize the installation of Wave 2 11ac access points:• Optimizing Access Point Placement and cabling efficiency with slim, quiet design and mounting accessories
• Fully Non-Blocking For Wave 2 AP with 8x2.5G to the 11ac AP and 2x10G line-rate aggregation to the wiring closet
• Full PoE+ Provision Across All Ports Multigigabit Ethernet and compatible with most major wireless/switching vendors
More Flexible Than HP/Aruba MultiGig
Competitive Analysis
Looking to… Network refresh?
Let’s talk about resilient switching
• Stackable 10G and 1G Switches with Full PoE+ for Resilient, Spine and Leaf, Edge to Core Connectivity
M4300
M4300
Competitive Positioning Summary
Competition SKUs M4300 Advantages
(10G) CISCO 350XGSG350XG-2F10T/
-24F/ -24T/ -48T1G / 10G models mixed stacking
Non-Stop Forwarding, HA
Half-Width 10G models(10G) CISCO 550XGSG550XG-8F8T / -24F/
-24T/ -48T
(10G) ZYXEL XS3700 XS3700-24 True stacking, NSF, Half-Width
(1G) HP/ARUBA 2920J9726A/ 27A/ 28A/ 29A/
J9836A1G / 10G models mixed stacking
PoE+ full power with dual PSUs
Non-Stop Forwarding, HA(1G) HPE 3800J9573A/ 74A/ 75A/ 76A/
84A
(1G) CISCO 500SG500-28/ -52/ -28P/
-28MPP/ -52P/ -52MP 1G / 10G models mixed stacking
PoE+ full power with dual PSUs
Non-Stop Forwarding, HA(1G) CISCO 500XSG500X-24/ -48/ -24P/
-24MPP/ -48P/ -48MP/
-8F8T
(1G) CISCO 2960-XWS-C2960X-24TD-L/
-48TD-L/ -24PD-L/
-48LPD-L/ 48FPD-L1G / 10G models mixed stacking
PoE+ full power with dual PSUs
Non-Stop Forwarding, HA(1G) CISCO 2960-XRWS-C2960XR-24TD-I/
-48TD-I/ -24PD-I/
-48LPD-I/ 48FPD-I
+ Unlike any other stackable solution, M4300 comes with true Non-Stop Forwarding for unstoppable stack operation and Spine and Leaf capability for high performance stacking
NETGEAR M4300 Series CISCO 350 XG Series CISCO 550 XG Series
Feature Set IPv4/IPv6 Full Layer 3 IPv4/IPv6 Layer 2+ IPv4/IPv6 Layer 3 Lite
1G / 10G Models
M4300-28G 24x1G 2x10GBT 2xSFP+
M4300-52G 52x1G 2x10GBT 2xSFP+
M4300-28G-PoE+ 24x1G 2x10GBT 2xSFP+
M4300-52G-PoE+ 52x1G 2x10GBT 2xSFP+
M4300-8X8F 8x10GBT 8xSFP+
M4300-12X12F 12x10GBT 12xSFP+
M4300-24X24F 24x10GBT 24xSFP+
SG350XG-2F10T 12x10GBT (2 combo)
SG350XG-24F 24xSFP+ (2 combo)
SG350XG-24T 24x10GBT (2 combo)
SG350XG-48T 48x10GBT (2 combo)
SG550XG-8F8T 8x10GBT 8xSFP+
SG550XG-24F 24xSFP+ (2 combo)
SG550XG-24T 24x10GBT (2 combo)
SG550XG-48T 48x10GBT (2 combo)
Mixed Stacking YES / 8 Switches NO (only 10G) / 4 Switches NO (only 10G) / 8 Switches
Failover Time Non-Stop Forwarding Failover no downtime “Fast” Failover with downtime “Fast” Failover with downtime
Table Size48p 10G: 128K MAC 12K IP Routes 4K VLANs
All others: 16K MAC 512 IP Routes 4K VLANs64K MAC 8K IP Routes 4K VLANs 64K MAC 8K IP Routes 4K VLANs
Switching Fabric All Switches Line-Rate up to 960Gbps All Switches Line-Rate up to 960Gbps All Switches Line-Rate up to 960Gbps
PSU RedundancyFull Width models: 2 x Modular PSUs for RPS
Half Width models: 1 x Modular PSU1 x Fixed PSU 1 x Fixed PSU and external RPS
Cooling Front to back Side to side Side to side
SDN-Ready YES / OpenFlow 1.3 NO NO
Layer 2 Per VLAN Spanning Tree (PVST+ interop) NO NO
Layer 3Static routing, RIP, OSPF, VRRP, PBR, PIM
IPv6 support for Static routing, OSPF, and PIM
Static routing
IPv6 support for Static routing
Static routing, RIP, VRRP
IPv6 support for Static routing
NETGEAR
Differentiation
Scalable, future-proof access and distribution layer for converged networks:• Mixed 1G / 10G Stacking for servers aggregation and high performance 10G “spine” and 1G “leaves” star topologies
• Non-Stop Forwarding for master switch failover without any service interruption across the stack, ideal for HA
• Half-Width 10G Models with low acoustics for active-active server and storage connections across 2 switches / 1U
More Versatile Than Cisco 350 / 550 XG
NETGEAR M4300 Series ZYXEL XS3700 Series
Feature Set IPv4/IPv6 Full Layer 3 IPv4/IPv6 Layer 2+
1G / 10G Models
M4300-28G 24x1G 2x10GBASE-T 2xSFP+
M4300-52G 52x1G 2x10GBASE-T 2xSFP+
M4300-28G-PoE+ 24x1G 2x10GBASE-T 2xSFP+
M4300-52G-PoE+ 52x1G 2x10GBASE-T 2xSFP+
M4300-8X8F 8x10GBASE-T 8xSFP+
M4300-12X12F 12x10GBASE-T 12xSFP+M4300-24X24F 24x10GBASE-T 24xSFP+
XS3700-24 12x10GBT 12xSFP+ (4 combo)
or 8x10GBT 16xSFP+
Mixed Stacking YES / 8 Switches NO (only 10G) / 24 Switches reachable from 1 Mgmt IP
True Stacking? YES / redundant Distributed Link Aggregation across the stack NO (“iStacking” for single IP management only)
Failover Time Non-Stop Forwarding Failover no downtime “iStacking” without redundancy
Table Size48p 10G: 128K MAC 12K IP Routes 4K VLANs
All others: 16K MAC 512 IP Routes 4K VLANs16K MAC (Undisclosed number of IP Routes) 1K VLANs
Switching Fabric All Switches Line-Rate up to 960Gbps Line-Rate 480Gbps
PSU RedundancyFull Width models: 2 x Modular PSUs for RPS
Half Width models: 1 x Modular PSU2 x Modular PSUs for RPS
Cooling Front to back Front to back, modular fans
SDN-Ready YES / OpenFlow 1.3 NO
Layer 2 Per VLAN Spanning Tree (PVST+ interop) NO
Layer 3Static routing, RIP, OSPF, VRRP, PBR, PIM
IPv6 support for Static routing, OSPF, and PIM
Static routing, VRRP, PBR
IPv6 support: not IPv6 routing
NETGEAR
Differentiation
Scalable, future-proof access and distribution layer for converged networks:• 1G / 10G True Stacking with redundancy for high performance 10G “spine” and 1G “leaves” star topologies
• Non-Stop Forwarding for master switch failover without any service interruption across the stack, ideal for HA
• Half-Width 10G Models with low acoustics for active-active server and storage connections across 2 switches / 1U
Better Stacking Than ZyXEL XS3700
NETGEAR M4300 Series HP Aruba 2920 Series HPE 3800 Series
Feature Set IPv4/IPv6 Full Layer 3 IPv4/IPv6 Layer 3 Lite IPv4/IPv6 Full Layer 3
1G / 10G Models
M4300-28G 24x1G 2x10GBT 2xSFP+
M4300-52G 52x1G 2x10GBT 2xSFP+
M4300-28G-PoE+ 24x1G 2x10GBT 2xSFP+
M4300-52G-PoE+ 52x1G 2x10GBT 2xSFP+
M4300-8X8F 8x10GBT 8xSFP+
M4300-12X12F 12x10GBT 12xSFP+
M4300-24X24F 24x10GBT 24xSFP+
24x1G: J9726A 4xSFP shared
48x1G: J9728A 4xSFP shared
24x1G PoE+: J9727A 4xSFP shared
48x1G PoE+: J9729A 4xSFP shared
48x1G PoE+: J9836A 4xSFP sharedAll models: 2 module slots for 10G
and 1 stacking module slot for stack
24x1G: J9575A 2xSFP+ J9585A 2x10GBT
48x1G: J9576A 4xSFP+ J9586A 4x10GBT
24xPoE+: J9573A 2xSFP+ J9587A 2x10GBT
48xPoE+: J9574A 4xSFP+ J9588A 4x10GBT
24xSFP: J9584A 2xSFP+All models: 1 stacking module slot for stack
Mixed Stacking YES / 8 Switches NO (only 1G switches) / 4 Switches NO (only 1G switches) / 10 Switches
Failover Time Non-Stop Forwarding Failover: no downtime Failover with possible timeouts Non-Stop Forwarding Failover: no downtime
Table Size48p 10G: 128K MAC 12K IP Routes 4K VLANs
All others: 16K MAC 512 IP Routes 4K VLANs16K MAC 2K IP Routes 4K VLANs 65K MAC 10K IP Routes 4K VLANs
Switching Fabric All Switches Line-Rate up to 960Gbps Line-Rate up to 176Gbps Line-Rate up to 176Gbps
PoE+28PA: 480W to 720W / 28PB: 630W to 720W
52PA: 480W to 720W / 52PB: 591W to 1,440W
J9727A: 370W (720W external)
J9729A: 370W (1,440W external)
J9836A: 740W (1,440W external)
J9573A / J9587A: 720W
J9574A / J9588A: 1,080W to 1,440W
PSU RedundancyFull Width: 2 x Modular PSUs for RPS / EPS
Half Width models: 1 x Modular PSU
1 x Modular PSU with external RPS
/ EPS2 x Modular PSUs for RPS / EPS
Cooling Front to back Side to side Side to side
SDN-Ready YES / OpenFlow 1.3 YES / OpenFlow 1.3 YES / OpenFlow 1.3
Layer 2 STP Loop Guard, Auto-iSCSI Aruba ZTP ZTP
Layer 3Static routing, RIP, OSPF, VRRP, PBR, PIM
IPv6 support for Static routing, OSPF, and PIM
Static routing, RIP
IPv6 support for Static routing, RIP
Static routing, RIP, OSPF, PBR, PIM, BGP
IPv6 support for Static, RIP, OSPF, and PIM
NETGEAR
Differentiation
Scalable, future-proof access and distribution layer for converged networks:• Mixed 1G / 10G Stacking without stacking kit and from 24p 1G to 48p 10G for 10G “spine” and 1G “leaves” star topologies
• PoE+ full provisioning with dual, redundant hot swap power supplies for business continuity
• Non-Stop Forwarding for master switch failover without any timeouts across the stack, ideal for HA
More Flexible Than HP Aruba 2920 Series
NETGEAR M4300 Series (10G Stacking) CISCO 500 Series (5G Stacking) CISCO 500X Series (10G)
Feature Set IPv4/IPv6 Full Layer 3 IPv4/IPv6 Layer 2+ IPv4/IPv6 Layer 3 Lite
1G / 10G Models
M4300-28G 24x1G 2x10GBT 2xSFP+
M4300-52G 52x1G 2x10GBT 2xSFP+
M4300-28G-PoE+ 24x1G 2x10GBT 2xSFP+
M4300-52G-PoE+ 52x1G 2x10GBT 2xSFP+
M4300-8X8F 8x10GBT 8xSFP+
M4300-12X12F 12x10GBT 12xSFP+
M4300-24X24F 24x10GBT 24xSFP+
SG500-28 24x1G 2xCombo 2xSFP(5G)
SG500-52 48x1G 2xCombo 2xSFP(5G)
SG500-28P 24x1G 2xCombo 2xSFP(5G)
SG500-28MPP 24x1G 2xCombo 2xSFP(5G)
SG500-52P 48x1G 2xCombo 2xSFP(5G)
SG500-52MP 48x1G 2xCombo 2xSFP(5G)
SG500X-24 24x1G 4xSFP+
SG500X-48 48x1G 4xSFP+
SG500X-24P 24x1G 4xSFP+
SG500X-24MPP 24x1G 4xSFP+
SG500X-48P 48x1G 4xSFP+
SG500X-48MP 48x1G 4xSFP+
SG500X-8F8T 8x10GBT 8xSFP+
Mixed Stacking YES / 8 Switches YES / 8 Switches only 1x10G 8F8T model 8 Switches, only SG500X-8F8T
Failover Time Non-Stop Forwarding Failover no downtime “Fast” Failover with downtime “Fast” Failover with downtime
Table Size48p 10G: 128K MAC 12K IP Routes 4K VLANs
All others: 16K MAC 512 IP Routes 4K VLANs16K MAC 2K IP Routes 4K VLANs 16K MAC 2K IP Routes 4K VLANs
Switching Fabric All Switches Line-Rate up to 960Gbps All Switches Line-Rate up to 320Gbps Line-Rate up to 320Gbps
PoE+28PA: 480W to 720W / 28PB: 630W to 720W
52PA: 480W to 720W / 52PB: 591W to 1,440W
28P: 180W / 28MPP: 740W
52P: 375W / 52MP: 740W
24P: 375W / 24MPP: 740W
48P: 375W / 48MP: 740W
PSU RedundancyFull Width models: 2 x Modular PSUs for RPS
Half Width models: 1 x Modular PSU1 x Fixed PSU 1 x Fixed PSU
Cooling Front to back Side to side Side to side
SDN-Ready YES / OpenFlow 1.3 NO NO
Layer 2 Per VLAN Spanning Tree (PVST+ interop) NO NO
Layer 3Static routing, RIP, OSPF, VRRP, PBR, PIM
IPv6 support for Static routing, OSPF, and PIM
Static routing
IPv6 support for Static routing
Static routing, RIP, VRRP
IPv6 support for Static routing
NETGEAR
Differentiation
Scalable, future-proof access and distribution layer for converged networks:• Mixed 1G / 10G Stacking from 24p 1G to 48p 10G for high performance 10G “spine” and 1G “leaves” star topologies
• PoE+ full provisioning and dual, redundant hot swap power supplies for business continuity
• Non-Stop Forwarding for master switch failover without any service interruption across the stack, ideal for HA
More Capable Than Cisco 500 / 500X
NETGEAR M4300 Series CISCO Catalyst 2960-X Series CISCO Catalyst 2960-XR Series
Feature Set IPv4/IPv6 Layer 3 IPv4/IPv6 Layer 3 IPv4/IPv6 Full Layer 3
1G / 10G
Models
M4300-28G 24x1G 2x10GBT 2xSFP+
M4300-52G 52x1G 2x10GBT 2xSFP+
M4300-28G-PoE+ 24x1G 2x10GBT 2xSFP+
M4300-52G-PoE+ 52x1G 2x10GBT 2xSFP+
M4300-8X8F 8x10GBT 8xSFP+
M4300-12X12F 12x10GBT 12xSFP+
M4300-24X24F 24x10GBT 24xSFP+
2960X-24TD-L 24x1G 2xSFP+
2960X-48TD-L 48x1G 2xSFP+
2960X-24PD-L 24x1G PoE+ 2xSFP+
2960X-48LPD-L 48x1G PoE+ 2xSFP+
2960X-48FPD-L 48x1G PoE+ 2xSFP+
1 stacking module slot for
FlexStack-Plus proprietary local stack
2960XR-24TD-I 24x1G 2xSFP+
2960XR-48TD-I 48x1G 2xSFP+
2960XR-24PD-I 24x1G PoE+ 2xSFP+
2960XR-48LPD-I 48x1G PoE+ 2xSFP+
2960XR-48FPD-I 48x1G PoE+ 2xSFP+
1 stacking module slot for
FlexStack-Plus proprietary local stack
Mixed Stacking YES / 8 Switches NO (only 1G switches) / 8 Switches NO (only 1G switches) / 8 Switches
Failover Time Non-Stop Forwarding Failover no downtime Failover with ‘minimized’ traffic disruption Failover with ‘minimized’ traffic disruption
Table Size48p 10G: 128K MAC 12K IP Routes 4K VLANs
All others: 16K MAC 512 IP Routes 4K VLANs16K MAC 2K IP Routes 1K VLANs 16K MAC 4K IP Routes 1K VLANs
Switching
FabricAll Switches Line-Rate up to 960Gbps All Switches Line-Rate up to 216Gbps All Switches Line-Rate up to 216Gbps
PoE+28PA: 480W to 720W / 28PB: 630W to 720W
52PA: 480W to 720W / 52PB: 591W to 1,440W
24PD-L: 370W / 48LPD-L: 370W
48FPD-L: 740W
24PD-I: 370W / 48LPD-I: 370W
48FPD-I: 740W
PSU
RedundancyFull Width models: 2 x Modular PSUs for RPS
Half Width models: 1 x Modular PSUExternal RPS unit for redundancy 2 x Modular PSUs for RPS
Cooling Front to back Side to side Side to side
SDN-Ready YES / OpenFlow 1.3 Cisco One Platform Kit (onePK) ready Cisco One Platform Kit (onePK) ready
Layer 2 Auto-iSCSI - -
Layer 3 Static routing, RIP, OSPF, VRRP, PBR, PIMStatic, RIP, OSPF, PBR
[IP base image]
Static, RIP, OSPF, EIGRPv3-Stub, VRRP,
PBR, PIM [IP Lite Image]
NETGEAR
Differentiation
Scalable, future-proof access and distribution layer for converged networks:• Mixed 1G / 10G Stacking without stacking kit and from 24p 1G to 48p 10G for 10G “spine” and 1G “leaves” star topologies
• PoE+ full provisioning and dual, redundant hot swap power supplies for business continuity
• Non-Stop Forwarding for master switch failover without any service interruption across the stack, ideal for HA
More 10G Ports Than Catalyst 2960-X