View
133
Download
1
Category
Preview:
DESCRIPTION
Manufactured, insulated and jacketed pipe for Food and Pharmaceutical applications
Citation preview
Dekoron Unitherm Introduction
6200-BPE
Process Ready Tubing & Pipe System
Company History
• Founded in 1962 Dekoron Unitherm is the inventor and world leader in the manufacturer of pre-insulated & heat traced tubing and pipe for industrial applications
• Dekoron Unitherm became part of The Marmon Group in 1999, The Marmon Group was founded in 1953 & is named after the Marmon Motor Company
• Marmon became part of Berkshire Hathaway in 2008
6200-BPEThe Next Generation in Insulated Tubing for the
Pharmaceutical & Food Industries
Features & Benefits• Reduced
• OD – 30% to 50%• Weight - 10% to 30%• Bend Radius – 35% to
40%• Improved
• Chloride SCC resistance• Fill of support trays & race
ways• Hydrophobic insulation
6200-BPE Process Ready System
Offers major Advantages over Field Fabrication of sanitary tubing
½” to 3” FR white PVC jacket• Lower Installed Cost
• By reducing waste• By greatly reducing field labor
• Pre-Engineered System• Has more efficient heat transfer• Has consistent thermal characteristics
• Improved Scheduling• By reducing craft interference• By greatly reducing or eliminating the need
for an insulation contractor• Maintenance Free• Molded & Insulated fitting covers
• Eliminate moisture egress • Are impact & chemically resistant• Install in minutes
Materials of Construction
6200-BPE
• Tubing• ASTM A-270 Tubing
• SF-1 thru SF-6• Rath Gibson• United Industries
• Insulation• Aspen Aerogel
Insulation• 2250 [0°F to 400°F]• XT [400°F to 1,100°F]• Cryogel [0°F to -350°F]
• Jacketing• White Extruded PVC
• Class A Fire Retardant• Low Temperature
6200-BPEBenefits of Bending
• Reduced Rouging • by reducing number of
field welds thus reducing number of Heat Affected Zones
• Eliminate the cost of elbows & 2 orbital welds
6200-BPEHangers & Supports
• No cutting or patching around supports
• Sized for use with standard Behringer hangers & supports
6200-BPEJoint/Splice Kits
6200-BPE Process Ready Tubing and Pipe is furnished in 20 foot sticks which can be cut & welded in the field using standard equipment. Joints are insulated using our 6200-BPE Splice Kit.
6200-BPEMolded & Insulated Covers
• Molded & Insulated fitting covers • Eliminate moisture
egress • Are impact &
chemically resistant• Install in minutes
6200-BPEInstalled Cost Comparison
2” x .065” A-270 Tubing• ID = RA-20• S-2 Packaging
•6200-BPE Pre-insulated• 4mm of Aerogel• 80mil White FR-PVC Jacket
•Field Fabrication• 2” thick Fiberglass Pipe Sections• FR-PVC Cut & Curl Jacket• Pins & Caulking
•Union Field labor • $60.00/man-hour
•Does not include Scaffolding•Does not include Mobilization & Demobilization charges
6200-BPEConclusion
The 6200-BPE Process Ready Tubing and Pipe System is the 21st century answer to all your insulated hot and cold tubing needs
Recommended