Techy Tuesday, Supra EKEY

Techy TuesdaySupra eKEY

Bluetooth Setup

From your home screen, go into your phones settings.

Turn your Bluetooth on and tap to configure

Your phone will scan for nearby Bluetooth devices, while it is scanning hold your key fob about 6-12

inches away from your phone and press the grey button until the green light starts to

flash.

Key “Fob”

When your phone says “paired” it means that your fob and phone

have successfully paired via Bluetooth.

If you have any problems with opening

a lockbox while showing a house- come back to this screen and make sure the two

are paired.

Obtaining a key

Open up your eKEY app on your phone and select the “Obtain Key”

option.

Enter your personal PIN code by pressing the

numbers on the key pad.

Opening a shackle

Opening a shackle is just as easy as obtaining a key. Go to the home of the eKEY app and select “Open Shackle”

Put in the lockbox shackle code the same way you would put in your pin number and then select a reason. You can choose-Adding on a new listing-Removing from listing-Relocating on same listing-None of the above

I chose “none of the above”, but the other options can be useful.Then hold the key fob about a foot away from the lockbox.

You can also add the box to inventory. This is useful so that you don’t have to go BACK in to your supra account and add the box- the app does it for you!

After you successfully open the shackle to a box the app will let you know how much battery life is left in the box.

Read Activity

Go to the app home and select “Read Activity”

Put in the shackle code of the box that you want to read the activity of and hit

“Begin”while pressing the button on the key fob

This screen shows you the entire history of this

lockbox.

Adding a box to inventory

Go to the app home and select “Add

Keybox”

Enter the shackle code of the box

you would like to put in your inventory and press begin. Then take your key fob and point it 6-12 inches away

from the box.

Updating your key

You can update your key any time you are in an area with cell service. Go to the home

screen of the app and hit “Update

Key”

Just like that your key has been

updated!

Other Features

One of my favorite features of the eKEY app is the flashlight. If you ever need to

check a house at night or if it is getting dark while you are showing- this is a

helpful tool that will help you “light the

way”!

Just go to the home screen of the app and slide the screen to the right. You will see the flashlight

option and press it.

It doesn’t look very bright, but it actually is when it is dark outside. To exit all you need to do is tap the

screen.

Thanks for watching!

I hope that you have learned a lot about how to use the Supra eKEY and what useful features it has. If you are interested in

getting an eKEY stop by the board office and Rachel will be happy to assist you! You can also contact to board office if you have any

questions or need help with the app.