DIVIDERS by COXUSA

I N T E R I O R S.

R E D E F I N E D.

AUTHORIZED DISTRIBUTOR

INTERIOR DIVIDERS

SLIDING PASSAGE DOOR

ROOM DIVIDER

The INTERIOR DIVIDERS is a distinct set of innovative and contemporary sliding door panels with proprietary hardware systems used in a wardrobe application, surface mounted door, wall pockets, corner room dividers or wall partitions. These door systems are limited to interior applications only.

SLIDING CLOSET DOOR

INTERIORS. REDEFINED.

SLIDING CLOSET DOOR

The bottom rolling system features high end nylon rollers with a geared component for easy adjustability up to 7/8” with anti-jump protection.

The top rolling system features twin rollers consisting of rubber wheels for smooth and quiet operation.

INTERIORS. REDEFINED.

CLOSET SLIDING DOOR

8001 TRACK, TOP, DOUBLE

8002 TRACK, BOTTOM, DOUBLE

H-171 ROLLER, BOTTOM

H-161 TWIN ROLLER, TOP

INTERIORS. REDEFINED.

SLEEK WARDROBE

INTERIORS. REDEFINED.

INTERIORS. REDEFINED.

SLIDING PASSAGE DOOR

The Sliding Passage Door System does not require a floor track. It features a uniquely designed wall mounted wheel guide for easy installation and full egress.

Each top roller assembly consist of two top roller assemblies each consisting of four nylon wheels with ball bearing axles for easy and smooth operation. Roller assemblies also feature anti-jump design with 3/4” vertical adjustability.

INTERIORS. REDEFINED.

SLIDING PASSAGE DOOR

8011 TRACK, TOP, ROLLED

81010 L-BRACKET32-076-2 TOP ROLLER

ASSEMBLY

8012 FASCIA100353 TWIN

ROLLER GUIDE

INTERIORS. REDEFINED.

COZY WINE CELLAR

INTERIORS. REDEFINED.

Latch

INTERIORS. REDEFINED.

LATCHES (Continued)

SURFACE AND POCKET DOOR LATCH

PARTITION LATCH

OUTSIDE VIEW INSIDE VIEW OUTSIDE VIEW INSIDE VIEW

INTERIORS. REDEFINED.

ROOM DIVIDER

The bottom rolling system features high end nylon rollers with a geared component for easy adjustability up to 3/4” with anti-jump protection.

The top rolling system features twin rollers consisting of rubber wheels for smooth and quiet operation.

Horizontal and vertical support beams aremade of 14 gauge aluminum, 6063 or 6065alloy. Available in 2” x 4”, 4” x 4” and 4” x6”.

Other options available upon request.

INTERIORS. REDEFINED.

LOFT BEDROOM

INTERIORS. REDEFINED.

HOME OFFICE IN STYLE

INTERIORS. REDEFINED.

COZY NOOK

INTERIORS. REDEFINED.

BEAUTIFUL STORAGE

INTERIORS. REDEFINED.

2 PANEL TRACKLESS WARDROBE

FASCIA SPACERS

BACK TO BACK TWINBOTTOM ROLLERS

INTERIORS. REDEFINED.

2 PANEL TRACKLESS WARDROBE(Continued)By butting the top tracks together we get the correct distance for butting the twin bottom guides together allowing for correct alignment of the panels.

The current distance between the doors is ½” which is a gap that is 3/16” larger than the gap in the 3 Panel door.

If we were to create a new stamped metal part that combined the twin bottom rollers we could reduce the gap to 5/16”.

INTERIORS. REDEFINED.

3 PANEL TRACKLESS WARDROBE

ATTACHED TO FLOOR ATTACHED TO STILE

THIS CONFIGURATION, 2 OPEN POSITION OPTIONS

INTERIORS. REDEFINED.

3 PANEL TRACKLESS WARDROBE(Continued)It is necessary to rip the tab off of the track so the twin bottom roller bracket mounts to the stile with the correct distance to allow alignment of the panels.

As a result of ripping the tab, the gap between the doors becomes 5/16” instead of ½” as in the two panel system.

INTERIORS. REDEFINED.

FRAME FINISH OPTIONS

BLACK

WHITE

SATIN ALUMINUM

JAVA

INTERIORS. REDEFINED.

GLASS OPTIONS

MIRROR

WHITE LAMIPOLAR WHITE

BEIGE BLACK RAINFOREST GREEN

INTERIORS. REDEFINED.

DÉCOR RAIL

3-LITE 4-LITE 5-LITE

INTERIORS. REDEFINED.

5/16” Reveal

1/2” Reveal3/16” Reveal

1/8”Reveal

Pivot Door

INTERIORS. REDEFINED.

PIVOT DOOR (Continued)1/8” Adjustmentsfor out of plumb

Floor spacer

Wall brackets

Pivot inserts

Pivot Pin

Knurled edge

o Wall brackets are mirrors of each other so only two stamped parts are required to handle left or right hinge installations.

o Pivot inserts are mirrors of each other so only two die cast parts are required to handle left or right hinge installations.

o The Pivot pin has a knurled edge to allow for easy rotation for alignment during installation.

o The door will require a ball catch latch to secure and stop the door in the closed position, like we currently do with the geared hinge door. Our current UDC latch could work with a few modifications to the handle and bolt catch.

o If casing is going to be used to stop the door, the minimum height would be 5/16” unless an out of plumb condition dictated otherwise.

INTERIORS. REDEFINED.

www.dividersusa.us

SHOWER ENCLOSURES

SS-180SHOWER ENCLOSURE WITH FIXED

PANELThe DIVIDERS SHOWER ENCLOSURES is set of premium sliding door panels with the most inspiring and innovative proprietary hardware systems in the market today.

Both the DS-200 and SS-180 presents a blend of style and luxury that satisfies the most discriminating taste in décor.

DS-200FULL BIPASS SHOWER

ENCLOSURE

INTERIORS. REDEFINED.

o Full bi-pass shower enclosure

o Contemporary and exposed stainless steel rollers and anti-

jump feature

o Maximum width of 60” / Maximum height of 78”

o Available in 5/16” clear glass only

o Aluminum flush finger pull

o Metal finish options: polished chrome and brushed nickel

Solid stainless steel header system provide the support to hold up

the 5/16” glass.

Exposed 2-1/8” diameter ball bearing

top rollers.

Bottom Door Guide Flush Finger Pull

DS-200 | FULL BI-PASS SHOWER

ENCLOSUREPRODUCT FEATURES + OPTIONS

INTERIORS. REDEFINED.

Solid stainless steel header system provide

the support to hold up the 5/16” and 3/8” glass.

Exposed 1-1/2” diameter ball bearing

top rollers.

Door Stop Flush Finger Pull

SS-180 | SHOWER ENCLOSURE W/ FIXED

PANELPRODUCT FEATURES + OPTIONS

INTERIORS. REDEFINED.

o Single stationary shower enclosure

o Contemporary and exposed stainless steel rollers and anti-jump features

o Maximum width of 72” / Maximum height of 78”

o Available in 5/16” and 3/8” glass

o Contemporary square handle or

finger pull

o Metal finish options: polished chrome and brushed nickel