View
267
Download
3
Category
Tags:
Preview:
DESCRIPTION
Â
Citation preview
2015/16
Welcome to the 2015/16
Introduction
This is the place where you’ll find those unique, hard-to-find tools that do specialist trade & DIY jobs. From skip ramps and block splitters to access equipment and tar boilers you’ve got the industry’s widest selection of specialist branded products in one handy booklet.
DISCLAIMER: The Company’s standard terms & conditions apply and are available upon request. All product descriptions are correct at the time of printing. Images are for guidance only and do not necessarily represent the goods on offer. The company reserves the right to modify products and withdraw promotions without prior notice.
All promotional and value-added FOC items are subject to stock availability, and may differ occasionally from those advertised. The Company endeavours to ensure that the information in this catalogue is correct, but does not accept any liability for any error or omission herein. All rights are reserved. No part of this publication may be reproduced or transmitted in any form without written permission of the copyright holder.
Full terms & conditions are available upon request.
Specialist Equipment Directory
Contents
Battery Charging Unit 03
Tile Cutters 08
Damp Proofing 07
Skip Ramp / Barrow 06
Ladders & Access 29
Sprayers 05
Manual Handling 28
Gas Torches 14
Roofing Tools 16
Pump Solutions 18
Transformers & 24Power Splitters
Mixers 13
BPT Site Equipment 04
RCD Plugs & Sockets 24
Gas Cylinder Cages 15
Specialist Equipment Directory B
atte
ry C
harg
ing
Uni
t
10 Door Charging Unit 6 Door Charging Unit
Part No: S10400 Part No: S10450
Specification
• Features 10 secure lockers, each with: - Coin return locking - 2-gang RCD protected 13A outlets - Numbered keys for easy ID - Individual locker venting • Integral management unit with: - MCB protected distribution unit - Hasp lock: padlock and 2 keys - 3M lead with 230V 16A plug - Manager instructions and guide
Specification
• Features: 6 secure lockers, each with: - key operated cam lock - 2-gang RCD protected 13A outlets - Numbered keys for easy ID - Individual locker venting
• Integral management unit with: - MCB protected distribution unit - Hasp lock: padlock and 2 keys - 3M lead with 230V 16A plug - Manager instructions and guide
Secure Charging
Features
01
Coin Return Locking (10 Locker verison only)
02
Individually Numbered
03
NEW
003
Manual Tyrolean Machine
Part No: B01001
Specification
• Designed to apply textured coatings to interior and exterior walls • Easy to use • Large capacity plastic body • Replaceable parts
Double Suction Lifter
Part No: D90012
Triple Suction Lifter
Part No: D90013
Specification
• Plastic body • Rubber suction clips • Capable of lifting 100Kg in weight
Specification
• Plastic body • Rubber suction clips • Capable of lifting 150Kg in weight
SC4 Block Splitter
Part No: C21400
Specification
• Max cut: 12" x 4.5" • Easy cutting action operation • Cam lever operation • Accurate cuts every time • Long life blades • Heavy-duty construction
Site Equipment
BP
T S
ite Eq
uipm
ent
004
Sp
raye
rs
Part No: F15350
8ltrGMCS 8 Compression Sprayer SS10 Stainless Steel Chemical Sprayer
Part No: ZF15200
GMCS 20 Compression Sprayer
Part No: ZF15300
20ltr20ltr
Specification
• Tough plastic construction • Easy pumping action • Aluminium spray lance • Adjustable nozzle for precise spraying • Weight 2Kg (empty)
Specification
• 1.2m flexible rubber hose• Complete with shoulder strap• Integral safety gauge• Stainless steel tank• Brass spray lance with adjustable nozzle
Specification
• Robust plastic body • Brass compression chamber • Brass spray lance • Adjustable nozzle for accurate spraying • Weight 3Kg (empty)
005
Hold-fast clamp Recessed wheel channel Pitted walkway Patented wheel trap & pivot bar
Part No: B40003 Part No: BEAGVPP
3M Skip Ramp Builders Barrow
Specification
• Faster load capability • Lightweight construction • Patented design • Easy to store • No maintenance (no moving parts) • Safe working load up to 300Kg • Length 3M • Weight 35Kg
Specification
• 85L Heavy-duty press pan • Tubular frame • Galvanised• Puncture proof wheel
Skip
Ram
p / B
arrow
Features
006
Ensign DPC 4 Way Pump
Part No: 110V K120110 240V K120240
Manifold Assembly Manifold Assembly
Part No: K201630 Part No: K201625
Snap Fit Extension Hose
Part No: 10M K251001 15M K251501Part No: 110V K121110 240V K121240
Ensign DPC 4 Way Pump 10in Manifold 110V & 240V
110V & 240V
10M & 15MBrown Flexi Plugs
Part No: 10kg K40001 1kg K40011
1Kg & 10Kg
ENSIGN
Specification
• C/W 4 x 10in Tap Rods• 4-way manifold for use with the damp proofing machine• Assembled using polyurethane non-hardening hose• Includes a brass manifold block
Specification
• C/W 6 x 10in Tap Rods• 6-way manifold for use with the damp proofing machine• Assembled using polyurethane non-hardening hose• Includes a brass manifold block
Specification
• Polyurethane non-hardening extension hose• Snap fitting
Specification
• 1kg/10kg Pack of flexiheads
Specification
• Damp Proofing Kit 4way• Hypro twin piston pump head• Suction and return hose with fitted strainer• Power take-off point for drill or breaker• Full wrap round frame for protection• 4 way manifold complete with rods
Specification
• Hypro twin piston pump head• Suction and return hose with fitted strainer• Independent on/off switch• Power take-off point for drill or breaker• Full wrap round frame for protection• Carry handle
Dam
p P
roo
fing
007
Tile C
utters
Versatile Power Pro 900 Bridge Saw110 & 230V
610mm 435mm 35mm
The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT
800W Bridge Saw230V
Part No: 103620
Specification
• Super quiet induction motor 800w• Diagonal tile cuts from 0–45°• Diamond blade with continuous rim for clean cuts Ø200mm• Constant speed for smooth cuts• Water tray with drain plug for easier cleaning• Removable stand
StraightCuts
ProfileCuts
Irregular Angles
Including45°
45°
Mitre Cuts
Straight, Angle & Mitre Cuts...
StraightCuts
ProfileCuts
Irregular Angles
Including45°
45°
Mitre Cuts
Straight, Angle & Mitre Cuts...
620mm 440mm 35mm
Specification
• Induction motor 900w• Diagonal tile cuts from 0–45°• Direct drive motor has a thermal overload protection• Oversized ‘bench style’ slotted aluminium cutting table with integral drainage• Dual water feed increases blade life• Large water tray with submersible pump• Built–in carry handles
Part No: 110V 103440 230V 103450
008
Tile
Cut
ters
Part No:103420 Part No:103421
General Purpose Diamond Blade Ø180mm & Ø200mm
Versatile Power Pro 750 Wet Saw 230V
Versatile Power Pro 750 Wet Saw110V
Specification
• 750w Direct drive produces a constant cutting speed for ultra smooth cuts • Ø180mm x 16mm diamond blade with continuous rim for extra clean cut • Extra large cast aluminium cutting table for supporting oversize tiles• Cutting table tilts for 15˚, 30˚ and 45˚ mitres• Water cooling system with large with large reservoir and integral drainage• Transparent wheel guard with variable height adjustment • Moulded plug with 1.5m cable• Convenient built- in carry handle and cable tidy• Black carrier is reversible for both 16mm and 22mm bore sizes
Specification as per Versatile Power Pro 750 Wet Saw 230V.
Replacement diamond blade, suitable for cutting ceramic, terracotta, quarry, slate, marble, masonry concrete and stone tiles.
StraightCuts
ProfileCuts
Irregular Angles
Including45°
45°
Mitre Cuts
Straight, Angle & Mitre Cuts...
ALL ALL 25mm
ALL ALL 25mm
Part No: Ø180mm Blade 103407, Ø200mm Blade 103411 -
Specification
009
Tile C
utters
The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT
Clinker Xl 750 Pro Tile CutterClinker Xl 900 Pro Tile Cutter
Part No: BRUTUS750Part No: BRUTUS900
Specification
• High precision cutting head with replaceable tungsten carbide wheel• Cutting head carriage with ball bearings for greater accuracy and easier use• Table extensions to support larger format tiles• Large graduated swivelling cutting guide• Replacement cutting wheel available• Comfortable co-moulded handle• Wheels for easy transport• Shock absorbing trays• 2 year guarantee• Carrying handle
Specification
• High precision cutting head with replaceable tungsten carbide wheel• Cutting head carriage with ball bearings for greater accuracy and easier use• Table extensions to support larger format tiles• Large graduated swivelling cutting guide• Replacement cutting wheel available• Comfortable co-moulded handle• Wheels for easy transport• Shock absorbing trays• 2 year guarantee• Carrying handle
900mm 635mm 20mm 750mm 530mm 20mm
Double Tray 900mm Single Tray 750mm
Spare Parts Order Part No Qty
Replacement cutting wheel CXLWHEEL 1
Spare Parts Order Part No Qty
Replacement cutting wheel CXLWHEEL 1
010
Tile
Cut
ters600 Manual Tile Cutter630 Heavy Duty Tile Cutter
Part No: 102370Part No: 102380
Specification
• Simple score and snap operation• Tungsten carbide cutting wheel• Straight cuts on tiles up to 600mm square• Diagonal cuts also possible on tiles up to 425mm square tiles• Suitable for cutting wall, floor and ceramic tiles up to 12mm thick
Specification
• Compact and lightweight, with a rigid aluminium construction and adjustable cutting guide• Cuts tiles up to 630mm long, diagonal cuts on tiles up to 445mm square• Suitable for cutting wall, floor and ceramic tiles up to 13mm thick• Simple score and snap operation• Tungsten carbide cutting wheel
630mm 445mm 13mm 600mm 425mm 12mm
Spare Parts Order Part No Qty
Replacement cutting wheel 102385 1
Spare Parts Order Part No Qty
Replacement cutting wheel 102375 1
011
Tile C
utters
Astro Pro Masonry, Concrete, Brick & Tile Cutter230V
Part No: WSBMC720
Specification
• Powerful 720w industrial motor• Adjustable cutting depth - can be locked into place• Diagonal cutting guide• Water cooling system• Supplied with an anti-shock carry case, ideal for storage and transportation• Supplied with 2x Ø200mm blades:• 1x diamond blade with continuous rim for cutting tiles• 1x turbo disc for cutting: bricks, concrete tiles, flat tiles, roof tiles, terracotta, slate floors and • Thin concrete, stone, marble granite, sandstone (dry or wet cut)
General Purpose Diamond Blade Ø200mm
Part No: 103411
Replacement diamond blade, suitable for cutting ceramic, terracotta, quarry, slate, marble, masonry concrete and stone tiles.
ALL ALL 45mmStraightCuts
ProfileCuts
Irregular Angles
Including45°
45°
Mitre Cuts
Straight, Angle & Mitre Cuts...
Includes robust, protective carry case for ease of transportation
012
Mix
ers
1400w Power Mixer230V & 110V
1600w Power Mixer Plus230V
Part No: MIXPLUS
Specification
• Specially designed powerful motor• 2 Gears for high performance• Electronically controlled variable speed• Lockable speed control for continuous operation• Supplied in storage case• Paddle - Ø140mm• 1400w for mixing up to 120L• 2 Gear• Speed (no load) 300-700rpm
Specification
• Powerful high torque motor for more efficient mixing• Ergonomic handle to minimise fatigue• Variable speed for greater control• Safety on/off switch with lock-on function for continuous running• Thermal overload protection for increased safety• Robust carry case for ease of transportation• Paddle - Ø140mm• 1600w for mixing up to 120L• 2 Gear• Speed (no load) 300-700rpm
The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT
Part No: 230V MIX1400 110V MIX1400IND
Adhesive Mixer PaddleØ120mm & Ø140mm
Mixer Stand with Bucket
Part No: Ø120mm MIXADH120 Ø140mm MIXADH140
Part No: MIXSTBUCK
Specification
• Suitable for use with MIX1400/IND and MIXPLUS• Length 600mm• Designed to mix sticky and viscous materials e.g. tile adhesive, bonding mortar, jointing compound, ready mixed plaster, floor screed, fillers etc.
Specification
• Stand suitable for use with Vitrex Mixers• Effortless mixing for large quantities• Locking system provides multiple positions• Sturdy wheels allow for easy positioning• Folds for ease of storage and carrying
Mixes from bottom up
013
Specification • Regulation Trigger• 3 interchangeable burners Ø 10 – 14 – 17 mm • 5 m rubber hose PVC 3/8” 3/8” • Burner Ø 10 mm = inject 0.15 mm POWER 1 kW (lab test 4 bar)• Burner Ø 14 mm = inject 0.20 mm POWER 2 kW (lab test 4 bar)• Burner Ø 17 mm = inject 0.24 mm POWER 2.75 kW (lab test 4 bar)
Specification • Regulation Trigger• Neck 100mm long• Burner Ø 45 mm• 5 m rubber hose PVC 3/8” 3/8” • Burner Ø 45 mm = inject 1.00 mm POWER 53 kW (lab test 4 bar)
Specification • Regulation Trigger• Neck 600mm long • Turbo burner Ø 60 mm • 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 60 mm = inject 1.50 mm POWER 75 kW (lab test 3 bar)
Specification • Regulation Trigger• Neck 600mm long • 2 x turbo burner Ø 60 mm • 5 m rubber hose PVC 3/8" 3/8" • TURBO Burner Ø 60 mm = inject 1.50 mm POWER 75 kW X 2 pcs (lab test 3 bar)
Specification • Regulation Trigger• Neck 600mm long • 4 x turbo burner Ø 45 mm • 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 45 mm = inject 1.20 mm POWER 42 kW X 4 pcs (lab test 3 bar)
Specification • Regulation Trigger• Neck 600mm long • 3 x turbo burner Ø 50 mm• 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 50 mm = inject 1.40 mm POWER 44 kW X 3 pcs (lab test 3 bar)
Gas To
rches
600mm Quad Head Torch
Part No: B24445
Plumber’s Torch
Part No: B21115
200mm Single Head Torch
Part No: B21120 Part No: B22160
600mm Single Head Torch
600mm Double Head Torch
Part No: B23260
600mm Triple Head Torch
Part No: B23360
014
Gas
Cyl
ind
er C
ages
Part No: See below
Gas Cylinder Cages
Gas Cylinder Cages
B50010 Gas Cylinder Cage GC05 Accepts 3 x 19kg cylinders 900mm high x 1000mm wide x 500mm deep 50 x 50 x 3mm Weld Mesh Weight: 50kgB50020 Gas Cylinder Cage GC15 Accepts 6 x 19kg cylinders 1700mm high x 1000mm wide x 500mm deep 50 x 50 x 3mm Weld Mesh Weight: 80kg Fixed Internal ShelfB50030 Gas Cylinder Cage GC20 Accepts 4 x 47kg cylinders 1800mm high x 900mm wide x 900mm deep 50 x 50 x 3mm Weld Mesh Weight: 80kgB50040 Gas Cylinder Cage GC25 Accepts 9 x 19kg cylinders 1200mm high x 1200mm wide x 1200mm deep 50 x 50 x 3mm Weld Mesh Weight: 60kgB50050 Gas Cylinder Cage GC30 Accepts 9 x 47kg cylinders 1800mm high x 1200mm wide x 1200mm deep 50 x 50 x 3mm Weld Mesh Weight: 90kgB50060 Gas Cylinder Cage GC35 Accepts 10 x 47kg cylinders 1800mm high x 1800mm wide x 900mm deep 50 x 50 x 3mm Weld Mesh Weight: 100kgB50070 Gas Cylinder Cage GC40 Accepts 15 x 47kg cylinders 1800mm high x 1800mm wide x 1200mm deep 50 x 50 x 3mm Weld Mesh Weight: 110kgB50080 Gas Cylinder Cage GC50 Accepts 25 x 47kg cylinders 2000mm high x 2000mm wide x 2000mm deep 50 x 50 x 3mm Weld Mesh Weight: 140kgB50090 Gas Cylinder Cage GC55 Accepts 24 x 47kg cylinders 1800mm high x 2400mm wide x 1800mm deep 50 x 50 x 3mm Weld Mesh Weight: 140kg
Specification • Hinged door with hasp and Staple• Fixing points for bolting to solid surface• Supplied Flat Packed with fixings• Includes H&S Signage
• Size: 1700 x 880 x1735mm (L x W x H) • Weight: 130Kg• Manufactured from mild steel sections between 3 & 5mm thick• Covered with 2” x 2” 10g mild steel, copper coated weld mesh• Iron phosphated pre-treatment and powder coated • Comes with signs• Flat Pack: convienient for easy storage flat pack design• Dimensions: - Body 62.6Kg - Lid 14Kg - 2x doors 10.1Kg & 12.5Kg - 2x Internal shelves (735 x 750mm) 7.5Kg each
015
Part No: S10360
Fold Away Gas Cage
Part No: B18402
Regulator
Specification
• 0-4 bar regulator
Part No: See Below
5gl, 10gl, 15gl, 25gl, 40gl
Tar Boiler Kit Tar Boiler Kit (with tap)
Part No: See Below
Tar Boiler Site Trailer
Part No: 25gl B60050 40gl B60600
10gl, 15gl, 25gl
Specification
• Removable inner tank• Fully enclosed burner bracket • Adjustable 0-4 bar regulator• 5m of armoured hose
Specification
• Removable inner tank• Fully enclosed burner bracket • Heavy duty 10-25 gallon burner• Adjustable 0-4 bar regulator• 5m of armoured hose
B11051 5 gl Kit (without tap)B11102 10 gl Tar Boiler Kit (without tap) B11152 15 gl Tar Boiler Kit (without tap) B11252 25 gl Tar Boiler Kit (without tap) B11253 40 gl Tar Boiler Kit (without tap)
B12102 10 gl Tar Boiler Kit (with tap)B12152 15 gl Tar Boiler Kit (with tap) B12252 25 gl Tar Boiler Kit (with tap)
• Single axle construction • Un-braked• Chassis and integral • Frame manufactured from rolled hollow section • Gas bottle storage complete with safety chain and heatshield
• Fitted with lighting board • Tow coupling - eye or ball as required • Jockey support wheel• 2 x prop stands• Mudguards
25gl & 40gl
Specification
Ro
ofi
ng To
ols
016
Part No: Rubber B18500 Armoured B18600
5M Rubber Hose
Part No: B15375 Part No: B18800
Tar Boiler Ladle Standard Over Spill Tray
Specification
• 5M in length• 6mm thickness• Rubber Hose; for use with torches only• Armoured Rubber Hose; for use with torches and tar boilers
Spouted Bucket
Part No: B15130
Specification
• Made from reinforced steel• 3 Gallons
Specification
• Made from reinforced steel• 3 Gallons
Part No: B15232
Pouring Can Compound Bucket
Part No: B25070
Specification
• Made from reinforced steel
Specification
• Made from stainless steel• 3 Gallons
Rubber or Armoured
3gl
3gl
Specification
• British made overspill tray to fit any small (10gl), medium (15gl) large (25gl) boiler• Made from 2mm steel
1200mm x 900mm
3gl
Ro
ofi
ng T
oo
ls
PRO ROOFING KIT for expert results
017
Pum
p S
olutio
ns
Pump Solutions
Part No. Manual/Auto inlet/outlet (mm) kW flow (l/min) head (mtrs) w x l x h (mm) Dry weight (kgs)
MIZAR30A 1 1/4" Pump, Auto 240VMIZAR30A1 1 1/4" Pump, Auto 110VMIZAR30M2 1 1/4" Pump, Manual 240VMIZAR30M1 1 1/4" Pump, Manual 110V
The Mizars are 304 stainless steel pumps for domestic, trade and industrial use. With two motor sizes to select from, models are available with or without a float switch, and in 110 volts or 230 volts. Standard model takes soft solids up to 10mm°.
A submersible pump for use in narrow pits and sumps, which may be shallow or contain low levels of clean water.
It has a dual control switch, which lets the internal float switch to be switched to “on” or “off” by the user, to enable automatic level control or for manual drainage.
Model MS is a basic, fully rotary, cast iron and brass hand pump for diesel, paraffin and oil transfer.
Supplied with 25mm outlet spout, 1000mm (3 part) rigid riser tube, barrel adaptor, strainer stand and operating handle.
It should not pump water, petrol, chemicals, solvents or products with a low flash point.
ENM pumps are self-priming with bronze bodies and single impellers.
With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.
1" Transfer Pump
Part No: 110V ENM25 240V ENM252
1¼" Submersible Sump & Drainage Pump
Part No: See Below Part No: EGO500
110V & 240V1" Submersible Sump Pump
Part No: MS25
Oil/Diesel Barrel Pump
Pump Specification
MIZAR30A A 32 0.25 150 7 Ø154x234 5.2MIZAR30A A 32 0.25 150 7 Ø154x234 5.2MIZAR30M M 32 0.25 150 7 Ø154x234 4.9MIZAR30M M 32 0.25 150 7 Ø154x234 4.9EGO 500 A/M 25 0.47 170 7.5 168x206x280 3.6MS25 n/a 25 n/a 25 n/a 130x220x1265 4.5ENM25 n/a 25/25 0.45 55 13 141x318x190 9.0ENM252 n/a 25/25 0.45 55 13 141x318x190 9.0
230V Dual control
018
Pum
p S
olu
tio
ns
6M & 30M
Part No: See Below
Pump Leads
Part No: 999-000-010
Suction & Delivery Hose ¾"- 3"
Part No: See Below Part No: See Below Part No: See Below
Hose Coupling Hose Joiner
Cam Coupling
Part No: See Below
Tin Strainer
137119 6M Coil ¾"P10112 6M Coil 1"P10117 6M Coil 1¼"P10122 6M Coil 2"P10132 6M Coil 3"137119.3 30M Coil ¾"137125.3 30M Coil 1"137132.3 30M Coil 1¼"137150.3 30M Coil 2"137180.3 30M Coil 3"
Specification General purpose hose for inlet use/suction side of engine driven pumps or for general discharge. Rigid but flexible, shock resistant, embedded nylon spiral-helix reinforced.
Specification Quick release hose couplings in aluminium overcome the problems of cross threading and lost washers associated with threaded connections on engine pumps. The threaded part is permanently attached to the pump and the two lever part is permanently attached to the hose for a quick conection and an air tight seal.
Specification Strainer in tin, for use on suction hose of engine driven pumps to keep debris out that may clog/damage the pump.
Specification Replacement sub pump leads in HO7RNF rubber 1.5mm. Will fit to Tsurumi, JS and Koshin 110V and 230V submersibles.
13402504 Cam Coupling, Part A 1" 13405004 Cam Coupling, Part A 2"13408004 Cam Coupling, Part A 3" 13412504 Cam Coupling, Part C 1"13415004 Cam Coupling, Part C 2" 13418004 Cam Coupling, Part C 3"
13602504 Tin Strainer 1"13605004 Tin Strainer 2"13608004 Tin Strainer 3"
SpecificationAluminium tube with ridges for joining two lengths of pipe together.
Specification Swivel couplings for attaching a hose to a threaded fitting on a pump.
13012502 Hose Coupling / Brass 1"13015003 Hose Coupling / Iron 2"13018003 Hose Coupling / Iron 3"
13382504 Hose Joiner 1" 13385004 Hose Joiner 2"13388004 Hose Joiner 3"
019
10M & 100M
12V DC
Pump Solutions
Pum
p S
olutio
ns
1” Diesel Transfer (Low Voltage)
Part No: DCC
Float Switch
Part No: 999-000-111 Part No: See below
Layflat Hose
Part No: 110V COUGAR 230V COUGAR2
1” Diesel Transfer Kit
Pressure Test Pump
Part No: 25BAR PT25 50BAR PT50
Dirty Water Centrifugal Pump
Part No: See below
SpecificationFloat switch to control water levels. For retro-fitting to Tsurumi, JS and Koshin 110V and 230V submersibles.
SpecificationGeneral purpose hose for open end discharge of water on engine pumps, submersible pumps and hand pumps. Soft, flat and flexible, yarn reinforced construction.
SpecificationThe Cougars are self-priming pumps for pumping diesel and biodiesel. The motors have rocker switches, internal filters (for trapping debris) and by-pass valves (for 2 minutes use against a closed nozzle). Kit includes a manual nozzle, hose fittings, strainer, hose and easy carry frame.Motor: 0.37kW Flow: 50 l/min Head: 20 mtrs Dimensions(mm) & weight in frame: 250 x 310 x 270 & 8.5 kgsIt must not pump water, petrol high viscosity liquids, chemical, solvents or any low flash point liquid.
SpecificationThe LC pumps are self-priming, centrifugal pumps with 4 stroke Loncin petrol engines, by Loncin of China. All models have aluminium pump housings for portability and ceramic mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.
SpecificationThe PT models are pressure test pumps for leak testing in water pipe systems. Suitable for pressurised plastic pipe plumbing and central heating systems. The reservoir is in powder coated steel with ½” male BSP connectors, heavy duty handle and supplied complete with a con-nector hose. Not suitable for gas pipe testing.
P10210.5 1” Layflat Hose - 100M Roll P10211 1” Layflat Hose - 10M LengthP10212.5 1 1/4” Layflat Hose - 100M Roll P10213 1 1/4” Layflat Hose - 10M LengthP10220.2 2” Layflat Hose - 100M Roll P10220.5 2” Layflat Hose - 10M LengthP10222 3” Layflat Hose - 100M RollP10223 3” Layflat Hose - 10M Length
LC25 1” Dirty Water Centrifugal Pump LC50 2” Dirty Water Centrifugal PumpLC80 3” Dirty Water Centrifugal Pump
25BAR, 50BAR
SpecificationThe DCC is a low voltage (D.C.) self-priming pump for pumping diesel and biodiesel only. The motor has a duty cycle of 30 minutes. It has a carry handle and is supplied with a 2 metre battery cable, crocodile clips, integral fuse and a switch. Included is a pumping kit that comprises hose, nozzle and connectors.Motor: 22 amps Flow: 30 l/min Head: 10 mtrs Dimensions (mm) & weight: 112 x 200 x 145 & 4.0 kgsIt must not pump water, petrol high viscosity liquids, chemical, solvents or any low flash point liquid.
020
Pum
p S
olu
tio
ns
Semi Trash Centrifugal Pump
Part No: 2" TD200HA 3" TD300HA Part No: 2" TDS50HA 3" TDS80HA
SEE TABLE ON PAGE 22 FOR PUMP SPECIFICATION
Part No: 2" TET50HA 3" TE480HA
Diaphragm Pump
2" Submersible Contractor Pump Dirty Water Centrifugal Pump 2" & 3"Auto, Manual, 110V & 240V
2" & 3" 2" & 3"
LB4801A 2” Pump, Auto 110VLB480A 2” Pump, Auto 240VLB480 2” Pump, Manual 110VLB480M 2” Pump, Manual 240V
Specification The TD series are automatic priming, engine driven diaphragm pumps with Honda petrol engines (with oil alert), from Tsurumi of Japan. They have maintenance free gearboxes, surge reduction chambers and an aluminium pump chamber. Capable of dry running. A site trolley is available as an optional extra.
Specification The LB series are heavy duty, yet lightweight, contractor pumps for dirty and abrasive site water. The dual position outlet on the LB480 and LB800, gives the option of either verticle or non kink horizontal pumping. Designed to operate for extended periods in seepage conditions. Available with or without a float switch.
TET50HA 2” Dirty Water Centrifugal Pump - Petrol TE480HA 3” Dirty Water Centrifugal Pump - Petrol
Specification The TE pumps are self priming centrifugal pumps with Honda 4 stroke petrol engines, by Tsurumi of Japan. They have aluminium pump housings for portability, and ceramic mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.
Specification The TDS models are self-priming, centrifugal, semi-trash pumps with Honda petrol engines, by Tsurumi of Ja-pan. They can pump solids up to 20mm in diameter. All models have aluminium pump housings for portability and silicon carbide mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.
Part No: See below
021
Part No: 2" TE350RD 3" TE380RD
2" & 3"1" 110V & 230V1" Submersible Residue Pump
Part No: 110v LSC1.4S 230v LSC1.4S/230
Pump Specification
Dirty Water Centrifugal Pump Dirty Water Centrifugal Pump
Part No: TEM25H
LB4801A A 50 0.48 225 11 Ø187x275 10.80LB480A A 50 0.48 225 11 Ø187x275 10.80LB480M M 50 0.48 225 11 Ø187x275 10.40LB480M M 50 0.48 225 11 Ø187x275 10.40LSC1.4S M 25 0.48 170 11 Ø196x316 12.00LSC1.4S/230 M 25 0.48 170 11 Ø196x316 12.00TEM25H n/a 25/25 GX25 140 40 215x340x270 5.00TET50HA n/a 50/50 GX120 520 32 356x470x350 22.00TE480HA n/a 80/80 GX160 1000 32 375x527x420 27.00TD200HA n/a 50/50 GX120 120 17 610x620x510 39.00TD300HA n/a 80/80 GX160 240 18 740x660x510 46.00TDS50HA n/a 50/50 GX120 780 23 345x470x420 24.00TDS80HA n/a 80/80 GX160 1150 23 370x525x420 27.00TE350RD n/a 50/50 DY23D 600 28 410x505x495 40.00TE380RD n/a 80/80 DY23D 900 28 410x590x510 42.00
Part No. Manual/Auto inlet/outlet (mm) kW/engine flow (l/min) head (mtrs) w x l x h (mm) dry weight (kgs)
LSC1.4S “puddle sucker” is used for pumping dirty site water, from a flat surface down to 1mm. The dual position outlet gives the option of non kink horizontal pumping or vertical pumping with the integral swing check valve also preventing back flow. A tough contractor’s pump designed to operate for extended periods in seepage conditions.
The TEM25H is a self priming centrifugal pump with a Honda 4 stroke petrol engine, by Tsurumi of Japan. It has an aluminium pump housing, volute, impeller and a ceramic mechanical seal.
The TE pumps are self-priming pumps powered by compact Subara-Robin diesel engines. Heavy duty design, yet portable, easy to start up and operate they can pump site water. With good flows and pressure, they are suitable for site use, land drainage and general transfer. Supplied in easy carry frame with strainer and couplings.
Pum
p S
olutio
ns
022
Pump Specification
Sump Pump Trash Pump2", 3", Auto, Manual, 230V, 110V ¾", 1", Auto, Manual, 240V, 110V/ 240V
BPS80A 3/4” Sump Pump, Auto 240VBPS80M 3/4” Sump Pump, Manual 240VBPS100A 1” Sump Pump, Auto 240V BPS100M 1” Sump Pumo, Manual 240VBPS400M110 2” Clean water pump, Manual 110VBPS400M240 2” Clean water pump, Manual 240VBPS400A110 2” Clean water pump, Auto110VBPS400A240 2” Clean water pump, Auto 240V
The BPS range combines excellent lifecycle with value for money performance in domestic and trade applications. Automatic models have a float switch fitted for automated control of water levels i.e. turning on and off when water levels rise and fall in sumps. Manual models do not have a float switch. For drainage and transfer applications - BPS80 and 100 manual versions are capable of pumping water down to 3mm. Constructed in thermoplastic, they are suitable for clean and slightly dirty water.
SV400M110 2” Trash Pump, Manual 0.4kW 110VSV400M230 2” Trash Pump, Manual 0.4kW 230VSV400A110 2” Trash Pump, Auto 0.4kW 110VSV400A230 2” Trash Pump, Auto 0.4kW 230VSV750M110 3” Trash Pump, Manual 0.75kW 110VSV750M230 3” Trash Pump, Manual 0.75kW 230VSV750A110 3” Trash Pump, Auto 0.75 kW 110VSV750A230 3” Trash Pump, Auto 0.75kW 230V
The SV series is a range of submersible pumps, with vortex impellers, for dirty water containing hard solids & fibrous matierials. With cast iron pump casings, base plate and impeller, stainless steel motor frames and thermoplastic head covers (SV750, cast iron). They are well suited to domestic and industrial applications.
BPS80A A 19 0.08 40 4 Ø136x255 2.20BPS80M M 19 0.08 40 4 Ø136x255 1.95BPS100A A 19 & 25 0.10 70 6.5 134x155x250 2.80BPS100M M 19 & 25 0.10 70 6.5 134x155x250 2.50BPS400M110 M 50 0.4 220 9 160x200x365 7.35BPS400M240 M 50 0.4 220 9 160x200x365 7.35BPS400A110 A 50 0.4 220 9 160x200x365 7.50BPS400A240 A 50 0.4 220 9 160x200x365 7.50SV400M110 M 50 0.4 350 8 160x215x420 11.30SV400M230 M 50 0.4 350 8 160x215x420 11.30SV400A110 A 50 0.4 350 8 160x215x420 11.55SV400A230 A 50 0.4 350 8 160x215x420 11.55SV750M110 M 80 0.75 425 11 165x265x440 17.15SV750M230 M 80 0.75 425 11 165x265x440 17.15SV750A110 A 80 0.75 425 11 165x265x440 17.40SV750A230 A 80 0.75 425 11 165x265x440 17.40
Manual/Auto
Outlet (mm) kW Flow (l/min)
Head (mtrs)
w x l x h (mm)
Dry weight (kgs)
Part No.
BPS100A
SV400M SV750A
Part No: See below
BPS400A
Pum
p S
olu
tio
ns
APP PUMPS
Part No: See below
APP PUMPS
023
Part No: E13220Part No: E205100 Part No: 110v E13200, 230v E13210
Spider Ball - Power Distribution Unit
Specification > Redistribution of 110V site power to use 110V appliances > Durable nylon/rubber casing provides extra protection for use in harsh conditions > Recessed outlets prevent them from being sheared off in harsh environments > Useful extra features include visible power-on indicators
and cable tidy with securing strap> Outlets 4x 16A
Spider Pod - Power Splitter
Specification > High impact, lightweight nylon shell for use in tough applications > Flexible, multi-directional outlets supply power to multiple tools > Compact design allows for easy trasportation and storage> Outlets 4x 16A
Power Pod Transformer
Specification > Perfect for site power conversion from 240V to 110V > Tough rubberised DuPont casing protects against the rigours of site
use and transportation > Recessed outlets prevent them from being sheared off in harsh environments > Power-on indicators for each socket show when tools are powered up
Specification
• Resettable circuit breaker• 2m of cable• Max Wattage of lighting that can
be used is 1666W • Outlets - 2X 16A 1X 32A
110VIn 230V / out 110V 110V, 230V
Transform
ers / Po
wer S
plitters
024
Specification• IP23 rating• Protected by MCB’s• Double wound with safety earth screen• Weight: 45Kg
Specification• IP23 rating• Protected by MCB’s• Double wound with safety earth screen• Weight: 91Kg
5KVA SITE TRANSFORMER
Part No: E203010
Part No: ZE210022Part No: ZE210028
Part No: E205042
3KVA TRANSFORMER 5KVA TRANSFORMER
10KVA AIR COOLED SITE TRANSFORMER
110V
110V 110V
110V
Specification
• Resettable circuit breaker• 2m of cable• Max wattage of lighting that can
be used is 1000W
Specification
• Resettable circuit breaker• 2m of cable• Max Wattage of lighting that can
be used is 1666W • Outlets - 2X 16A 1X 32A
Tran
sfo
rmer
s /
Po
wer
Sp
litte
rs
HIGH QUALITY, CUTTING-EDGE POWER DISTRIBUTION SOLUTIONS
Specification• Resettable circuit breaker• 2m of cable• Max wattage of lighting that can be used is 1666W
025
Specification• 16A Distribution box• 2.5mm cable• Fitted plug• Steel cased• 4x Outlets
Specification• 32A Distribution box• 4mm cable• Fitted plug• Fibreglass case• 6x Outlets
Classic 4-Way Power Distribution Unit
Part No: E13115
Part No: E13111Part No: E13104
Part No: E13125
4-Way Power Distribution Unit 6-Way Power Distribution Unit
2-Way Power Distribution Unit
110V
110V 110V
110V
Transform
ers / Po
wer S
plitters
HIGH QUALITY, CUTTING-EDGE POWER DISTRIBUTION SOLUTIONS
Specification• 16A Distribution box• 2.5mm cable• Fitted plug• Steel cased• Fitted MCB
Specification• Steel cased• Fitted MCB
026
Specification• 13A RCD wireable plug
Specification• 13A RCD plug & socket
Specification• 13A plug • 16A socket • 1M of arctic blue cable • Inline RCD
Specification• 13A plug • 16A socket • Fibreglass case• 2M cable
Specification• 13A plug • 13A socket • Fibreglass case• 2M cable
Part No: E11090
RCD Plug
Part No: E11070C Part No: E11092 Part No: E11085C
13-13A RCD Unit In-line RCD Unit
RCD Socket
Part No: E11060C
13-16A RCD Unit
RC
D P
lug
s an
d S
ock
ets
027
Part No: ST250/S8
Manual H
andling
Pallet Truck Sack Truck
Part No: T01000.1
Specification• Twin nylon steering wheels• Twin nylon bogey wheels • Durable leak proof hydraulic system• Maximum lifting capacity 2500Kg• Turning radius for manourvrability 210°• Fork length 1100mm• Width over forks 550mm• Weight 85Kg
Specification• Heavy-duty sack truck • 250kg carrying capacity • All tubular frame construction • Standard toe plate• Wheel guards• Solid rubber tyres
028
Part No: See belowPart No: 316515
Aluminium AluminiumTeleguard
Lad
der
s an
d A
cces
sPodium Ladder
DURABLE STABLETOUGH VARIABLE VERSATILE
Product Code
Rungs per section
Platform Size (m)
Height Adjustments
Max Safe Working Height (m)
Load Capacity (kg/stone)
Weight (kg)
316515 4 - 6 6.10 x 4.44 2 3.63 150/23.6 37
Product Code Treads Platform Height (m) Duty Rating (kg/stone)
Weight (kg)
52750300 3 0.91 136/ 21.4 10.3
52750400 4 1.22 136/ 21.4 12.1
52750600 6 1.93 136/ 21.4 15.6
52750800 8 2.44 136/ 21.4 21.3
52751000 10 3.05 136/ 21.4 26.7
Specification• Use in flat slab mode or on stairways• Simple height adjustment rung by rung• Double guardrails and positive locking gate on platform• Deep draining tool tray• Deck lock clip – auto lock• Excellent stabilisation• Robust aluminium chequer plate toeboard• Tough wheels for easy movement around site• Rugged rubber stabiliser overboots• Spring loaded stowage catch• Ladder section alignment bars at both sides
Specification• Available in 3, 4, 6, 8 and 10 tread • Ideal for working at fixed heights, easier to maneuver than scaffolds or lifts• LOCKTOP™ waist-high guard rail securely wraps around work zone• Extra-large standing platform for long standing comfort• EDGE360™ gives protection from every angle with integrated rail shield, EDGE bracing and oversized foot pad• 4X Work Zone allows you to work facing any direction
DURABLE STABLETOUGH VERSATILE NON CONDUCTIVE
029
Specification• Reduces the risk of theft and frees up interior
vehicle space• Includes padlocked for extra security• Fits to most extension ladders• Supplied as a pair• Approx. 0.27m of adjustment
Specification• Fits easily to most extension ladders• Avoid damage to gutters, tiles and windows
Ladder Rack Clamp (Pair)
Part No: 570122
Part No: 300870Part No: 303898
Part No: 570213
Trade 200 Trade 400
Ladder Stay
2 section Aluminium
Steel Steel
2 section Aluminium
Ladd
ers and A
ccess
DURABLE DURABLE TOUGH TOUGH VARIABLE VARIABLE VERSATILE VERSATILE
Product Code
Sections x Rungs
Closed Height (m)
Open Height (m)
Max Safe Working Height (m)
Duty Rating (kg/stone)
Weight (kg)
570112 3 x 10 3.08 7.43 7.68 110/17.3 20.99
Product Code
Sections x Rungs
Closed Height (m)
Open Height (m)
Max Safe Working Height (m)
Duty Rating (kg/stone)
Weight (kg)
570213 2 x 12 3.69 6.30 6.62 110/17.3 13.29
Specification• High-performance box-section alloy stiles• Easy, push up operation• Slip-resistant square rungs• Rung clips secure together for safe & easy use and
transport• Unique wrap-around top clips fit with smooth-glide
runners for reduce wear and tear
Specification• 30mm-deep square rungs for strength and comfort• Wall wheels to make ladder extension easier• Easy, push up operation• Rung clips secure together for safe and easy use and transport• Unique wrap-around top clips fit with smooth-glide runners for
reduce wear and tear
030
Part No: 310898 Part No: 312898
Odd Job 600 GRP Odd Job 600Aluminium Aluminium
Lad
der
s an
d A
cces
s
DURABLE DURABLE STABLE STABLETOUGH TOUGH COMPACT COMPACT LIGHTWEIGHT LIGHTWEIGHT
Product Code
Folded Size (m) Platform Size (m)
Platform Height (m) Load Capacity (kg/stone)
Weight (kg)
310898 0.73 × 0.38 × 0.18 0.30 × 0.70 0.51 110/17.3 4
Product Code
Folded Size (m) Platform Size (m)
Platform Height (m)
Load Capacity (kg/stone)
Weight (kg)
312898 0.63 x 0.68 x 0.18 0.60 x 0.60 0.51 110/17.3 5.7
Specification• Compact folded dimensions for easy storage• Large non-slip platform• Lightweight and easy to transport• Splayed base for extra stability
Specification• Large non-slip platform• Splayed base for extra stability• Compact folded dimensions for easy storage• Lightweight and easy to transport• Simple to use• Perfect for all odd jobs
031
Birchwood Price Tools Specialist Equipment Directory. Designed and Distributed by Birchwood Price Tools. Birchwood Price Tools is a trading name of the BSS Group Limited. Part No: K56756
Recommended