View
1
Download
0
Category
Preview:
Citation preview
Features• Input voltage: 125 - 400 VDC
• Nominal power: up to 500 W• Nominal current: up to 3.0 A• Input auxiliary voltage: up to 20 V DC• Single or three-shunt resistors for current sensing (with sensing network)• Two options for current sensing: dedicated op-amps or through MCU• Overcurrent hardware protection• IPM temperature monitoring and protection• Hall sensor or encoder input• Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series
of SLLIMM™ IPMs• 32-pin motor control connector for interfacing with ST MCU boards• Universal conception for further evaluation with breadboard and testing pins• Very compact size• RoHS compliant
DescriptionThe STEVAL-IPM05F is a compact motor drive power board based on the SLLIMM™(small low-loss intelligent molded module) 2nd series product, STGIF5CH60TS-L. Itprovides an affordable and easy-to-use solution for driving high power motors for awide range of applications such as white goods, air conditioning, compressors, powerfans, high-end power tools and generally 3-phase inverters for motor drives. The IPMitself consists of short-circuit rugged IGBTs and a wide range of features includingundervoltage lockout, smart shutdown, temperature sensing and NTC, andovercurrent protection.
The main characteristics of this evaluation board are its small size, minimal BOM andhigh efficiency. It consists of an interface circuit (BUS and Vcc connectors), bootstrapcapacitors, snubber capacitor, hardware short-circuit protection, fault event signaland temperature monitoring. In order to increase flexibility, it has been designed towork in single or three-shunt configuration and with double current-sensing optionssuch as using three dedicated on-board op-amps, or op-amps embedded in theMCU. The Hall/Encoder part completes the circuit.
Thanks to these advanced characteristics, the system has been specifically designedto achieve fast and accurate current feedback conditioning, satisfying the typicalrequirements for field-oriented control (FOC).
The STEVAL-IPM05F is compatible with ST’s STM32-based control board, enablingdesigners to build a complete platform for motor control.
Product summary
STEVAL-IPM05Fcompact motor drivepower board
STEVAL-IPM05F
STGIF5CH60TS-LSLLIMM™ 2nd seriesIPM
STGIF5CH60TS-L
500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM
STEVAL-IPM05F
Data brief
DB2717 - Rev 5 - September 2019For further information contact your local STMicroelectronics sales office.
www.st.com
1 Schematic diagrams
Figure 1. STEVAL-IPM05F circuit schematic (1 of 6)
STEVAL-IPMnmx decoder
N
M
X
RC6
0
RC2
0
RC1
0
RC10
0
RC7
0
RC3
0
RC8
0
RC4
0
RC5
0
RC9
0
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 2/9
Figure 2. STEVAL-IPM05F circuit schematic (2 of 6)
Current_A
Current_B
Current_C
phase_Aphase_Bphase_C
3.3V+5V
EM_STOPPWM-A-HPWM-A-LPWM-B-HPWM-B-LPWM-C-HPWM-C-L
NTC_bypass_relay
PWM_VrefM_phase_A
M_phase_B
Bus_voltage
M_phase_C
TSO
NTC
Current_B_amp
E2
Current_C_amp
E3
Current_A_amp
E1
J3
Motor Output
123
SW2
1
2
3
SW4
1
2
3
SW3
1
2
3
J2
Control Connector
1 23 45 67 89 10
11 1213 1415 161719212325 2627 2829 3031 3233 34
18202224
SW1
1
2
3
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 3/9
Figure 3. STEVAL-IPM05F circuit schematic (3 of 6)
InputDC_bus_voltage
3.3V
+Bus
3.3V
1.65V
Bus_voltage
D1BAT48JFILM
+ C447µ/35V
J1
INPUT-dc
12 R2
470K
R3 120R
R1470K
R61k0
-
+
U1D
TSV994
12
1314
411
+ C347µ/35V
R47k5
C210n
+C1
R51k0
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 4/9
Figure 4. STEVAL-IPM05F circuit schematic (4 of 6)
3.3V
1.65
V
1.65
V
3.3V
1.65
V
3.3V
E1
Cur
rent
_A_a
mp
E2
Cur
rent
_B_a
mp
E3
Cur
rent
_C_a
mp
R30
1k0
R29
2k1
-+
U1A
TSV9
94
3 21
4 11
TP24
R31
1k
R43
2k1
C30
100p
R37
1k0
C29
330p
R41
1k
C24
100p
C28
10n
C25
330p
TP25
-+
U1B
5 67
4 11
R35
1k0
C23
100n
C22
10n
R34
2k1
R33
2k1
R42
1k0
C31
330pTP
26
R32
1k0
R39
2k1
+
C21
4.7u
50V
C27
100p
-+
U1C
10 98
4 11
R40
1k0
R38
2k1
C26
10n
R36
1k
TSV9
94
TSV9
94
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 5/9
Figure 5. STEVAL-IPM05F circuit schematic (5 of 6)
Phas
e A
- inp
ut
Phas
e B
- inp
ut
Phas
e C
- in
put
IPM
mod
ule
1_SH
UNT
1_SH
UNT
3_SHUNT
3_SHUNT
3.3V
+Bus
phas
e_A
phas
e_B
phas
e_C
3.3V
3.3V
SD
TSO
NTC
PWM
-A-L
PWM
-A-H
PWM
-B-L
PWM
-B-H
PWM
-C-L
PWM
-C-H
EM_S
TOP
E3 E2 E1
TP23
C15
10p
R17
3k9
R27
0.1
U2
STG
IF5C
H60
TS-L
NW
18
VBO
OTw
4VB
OO
Tv3
LIN
v11
GN
Da
9
LIN
u10
LIN
w12
GN
Db
16
VCC
L13
SD14
CIN
15
NC
1
VBO
OTu
2
HIN
u5
HIN
v6
HIN
w7
VCC
H8
NV
19
NU
20
W21
V22
U23
P24
T225
T126
TSO
17
TP19
TP3
SW5
R22
3k3
R8
1k0
TP16
TP4
TP14
C11
10p
SW7
D3
BAT4
8JFI
LM
R53
4.7k
R14
1k0
D6
BAT4
8JFI
LM
TP20
R10
12k
TP15
J415V 12
C5 2.2u
R19
1k0
TP2
C17
10p
C20
330p
R26
0.1
SW8
TP9
TP13
TP11
TP10
C9
0,1
uF -
400V
R28
10k
R24
1k0
C14
10p
C8
100n
D2
LED
Red
TP8
TP12
C6
2.2u
R15
1k0
TP5
R18
1k0
D4
BAT4
8JFI
LM
C13
100n
TP7
TP22
R13
3k9
TP18
SW6
D5
BAT4
8JFI
LM
TP21
TP1
+C
124.
7u 5
0V
C18
10p
R9
1k0
C19
1n
TP6
R16
3k3
C7 2.2u
C16
1nF
R21
1k0
TP17
R12
5k6
R23
1k0
R7
3k9
C10
10p
R25
0.1
R20
1k0
R11
3k3
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 6/9
Figure 6. STEVAL-IPM05F circuit schematic (6 of 6)
H3/Z
+H2
/B+
H1/A
+
GND
+ 3.
3/5V
Hal
l/Enc
oder
M_p
hase
_A
M_p
hase
_C
M_p
hase
_B
3.3V +5
V
3.3V
+5V
R52
4k7
R49
2k4
J5
Enco
der/H
all
11
22
33
44
55
SW12
SW13
C37
10p
C34
100n
SW10
R50
4k7
SW14
SW9
1
2
3
R44
4k7
R51
4k7
R45
4k7
C33
100n
C35
10p
R47
2k4
R48
2k4
C32
100n
SW16
1
2
3
SW15
R46
4k7
SW11
C36
10p
STEVAL-IPM05FSchematic diagrams
DB2717 - Rev 5 page 7/9
Revision history
Table 1. Document revision history
Date Version Changes
23-Oct-2015 1 Initial release.
26-Oct-2015 2 Updated document title and part numberreferences.
09-Mar-2016 3 Updated Schematic diagram
04-Apr-2018 4 Updated document title, features incover page and Schematic diagrams.
16-Sep-2019 5
Updates Figure 3. STEVAL-IPM05Fcircuit schematic (3 of 6) andFigure 4. STEVAL-IPM05F circuitschematic (4 of 6)
STEVAL-IPM05F
DB2717 - Rev 5 page 8/9
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or servicenames are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
STEVAL-IPM05F
DB2717 - Rev 5 page 9/9
Recommended