View
224
Download
6
Category
Preview:
Citation preview
Jandy’s Pool Link provides cost effective timing
functions in an easy to wire module that can be
added to any AquaLink RS Power Center providing
basic automation. Dual timers provide you with the
operational features you’ll need for a single speed
filter pump plus a cleaner booster pump, in-floor
cleaning system or two-speed pump operation. Dual
circuit control will provide the functionality needed to
keep the water flowing and your pool sparkling clean.
Simple to install and operate, the Pool Link is perfect
for basic automation and easily upgraded later to any
AquaLink RS advanced control system.
Bring Basic Automation toany AquaLink® RS Power Center
™
SECONDARY TIMERAutomates operation of a cleaner booster pump or two-speed filtration pump a with a simple DIP switch setting. This secondary timer allows a subset of the primary timer for energy efficient operation to keep your pool sparkling clean.
SERVICE FEATURES
FITS ANY AQUALINK RS POWER CENTERThe Pool Link Dual Timer Module fits perfectly into the low voltage area of any AquaLink RS Power Center including PureLink. Easy installation and wiring makes this an obvious choice for basic pool automation with a chlorine generation system.
The 24-hour primary timer automates start and stop times of a single speed filter pump or two-speed pump and in-floor cleaning system. This highly reliable timer is designed for 24 hour operation and is capable of multiple on/off cycles per day.
PRIMARY TIMER
Conveniently located services switches allow three modes, “Manual”, “Off’, or “Auto Mode” for ease of operation and maintenance of the pool.
Pool Link
Dual
Timer
Module
The first, simple step towards
cost effective pool automation.
ALL JANDY PRODUCTS WORK
SEAMLESSLY TOGETHER
Jandy Control Systems
manage our complete line of
technologically advanced products.
1.800.822.7933 • www.jandy.com • info@jandy.com • ©2009 Zodiac Pool Systems, Inc. SL55
11 R
ev A
2/
09
Pumps • Filters • Heaters • Heat Pumps • ControlsLights • Water Purification • Valves • Water Features
Water Leveling • Cleaners • In-Floor • Pool Covers • Accessories
The Pool Link’s primary time clock is activated
by standard pull-to-trip tabs, providing your
daily automation of filtration cycles. If you are
looking to keep your energy bills down, set your
filtration cycle to activate during non-peak hours.
Each pulled tab represents 30 minutes of pump
activation, so you can set your filtration cycles for when you want and however
long you need. Rest assured that, each and every day, the Pool Link will keep
your pool sparkling clean. With the addition of a JVA, this system will also
automate an in-floor cleaning system by rotating the JVA every 20 minutes.
In addition to controlling a single speed filter
pump, the Pool Link will activate a cleaner booster
pump through DIP switch settings. Just like
clockwork, the Pool Link dutifully performs it’s task
of keeping your pool clean every day.
If your pool uses a two-speed pump for energy
efficiency, you can activate it from the Pool Link.
Simple settings of a DIP switch will operate your pump
in low speed for energy savings then switch to high
speed when necessary.
Since life is rarely timed perfectly, overriding the Pool Link is easy. With a
simple flick of a switch, you can override your setting and provide custom
filtration to clean up after a windy storm or in advance of a pool party
with friends and family. You can also switch off your pump for scheduled
maintenance or when you need instant peace and quiet.
Freeze protection and heater connection are standard with the Pool Link
control system, as well as control of an in-floor cleaning system with the
addition of a JVA. Automation of Jandy’s PureLink water
purification system is also a benefit when partnered
with the Pool Link Module.
A clean pool is guaranteed with the Pool Link Dual Timer
Module. Let the Pool Link automate the filter pump, automatic pool cleaner cycles and in-floor cleaning systems for efficient and safe operation of your pool equipment.
Jandy’s Two-Speed Stealth Pump
Polaris® Cleaners
PrimaryFilterPump Timer
Secondary TimerService Switches
Wiring Diagram
and Operating Instructions
Fits any AquaLink RS Power Center or PureLink Power Center
When Keeping Your Pool Clean, Timing is Everything.
Specifications
Pool Link Timer Module:
The Primary time switch sets the time and duration of filtration. The Secondary time switch sets duration of cleaner booster pump or HIGH SPEED operation of two speed pumps.
Pool Link Bracket Dimensions: 5”h X 10.5”w X 2”d to mount onto AquaLink RS Power Center bracket and install into low voltage area.
Item # Power Supply:
PLINK 120 VAC, 60 Hz, 3A
High Voltage: 25A; 3HP @ 240 VAC, 1.5 HP @120 VAC, 1500 Watts IncandescentLow Voltage: Class Two, 1A @24 VAC
Pool Link Timer Module Includes:• Pool Link bracket and PCB• Primary 24 hour time clock• Secondary timer switches• Service switches for both timers• Freeze protection sensor
Required and Sold Separately:AquaLink RS Standard or Sub-Panel Power Center or PureLink Standard or Sub-Panel Power Center
Contact Rating:
SINGLE SPEED PLUS CLEANER CONTROL
EASY OVERRIDE BY DESIGN
TWO SPEED PUMP CONTROL
ADDITIONAL PROTECTION & AUTOMATION
DAY TRIPPER
Recommended