View
30
Download
0
Category
Preview:
Citation preview
2
Raychem
Saudi Arabia Ltd.
CONTENTS PAGE
Terminations 2 - 3
Insulating boots 4
Support insulators 4
Cable box glands 5
Earthing kits
Joints
Control cable joints 9
Transition joints 9
Motor connection kits 10
Tools and accessories 1 1
Bus bar tubing 12
Wraparound cable repair sleeves 12
Bus bar tapes 13
Insulating and sealing tubing 14
Cable end caps 15
Cable breakouts 15
General purpose tubing 16
Wire marking sleeve 16
3
ESTU TERMINATIONS
Raychem low voltage heat shrinkable terminations are available for the full range of cable types and
sizes. They are acknowleged to be simpler, more reliable, and much cheaper to install then
traditional systems.
Catalog
Number
Conductor Size
Upto 1 KV / Plastic
Indoor / Outdoor
Four Conductors
Not Armoured Wire Armoured
ESTU-ox,'4C 4-16 ESTU-OW4C 4-16,'WA
ESTI_J-OX/4C 25-50 ESTu-OXi4C 25-50/WA 25 - 50
ESTU-OX/4C 70-150 ESTU-OW4C 70-150/WA 70-150
CSTu-OX/4C 185-300 ESTU-OXi4C '85-300,WA 185 - 300
ESTU-OX/4C 500-XXX ESTU.OX,'4C 500-XXX,WA
EPKT TERMINATIONS
Raychem medium voltage heat shrinkable terminations offer outstanding long term reliability with
over 25 years of proven performance in polluted environments. The installation accommodates
simplified cable preparation techniques. The factory engineered kit along with clear instruction
sheet permits rapid on-site installation.
Termination system DesignerVoltage
(Vrnax) Choosing one figure from theCable size left-
hand column of each tableNumber of
cores
Dielectric
Location
Length (3 core cables)
Mod
Codes
Typical part number : EPKT - 17 D 3 X 1 1+2 - BOB
Voltage in KV
4
7 for 7.2 KV
for 12 KV and 17.5 KV
24 for 24 KV
36 for 36 KV
Size in mm2 7.2 KV 12 KV & 17.5 KV 24 KV 36 KV
16 -
50
70 • 120 35 - 70 25 - 50
150 - 240 95 - 240 70 - 185 50 - 95
300 - 500 300 400 240 - 300 120 - 185
630 1000 500 -800 400 630 240 500
1000 BOO - 1000 630 - 1000
Number of Cores
For Single (1) core
3 For three (3) core
Dielectric or insulation type
For PLASTIC eg. XLPE, EPDM, EPR, etc.
For MIND non-draining paper (not applicable for draining paper cables)
Number of Cores
For INDOOR
o For OUTDOOR
Length (only three core) of the terminated portion (tail)
For 450 mm long
For 650 mm long (min for 17.5 KV outdoor and 36 KV
indoor)
For 800 mm long (min tor 24 KV outdoor and 36 KV
outdoor
For 1200 mm long
Selected Termination from given tables are without any accessories like earthing kits, boots etc.
A range of accessories for the above terminations are available. See pages 4,5 and 6. Single core kits contain components for 3 single core terminations,
Lugs are not included in the kits and should be procured separately.
Single core Termination are designed with one tail length based on voltage.
Raychem (RSAL) termination are also available upto 72KV voltage class. Please contact your local Raychem Office tor details.
5
ESIB INSULATING BOOTS
Raychem heat shrinkable insulating boots allow Raychem terminations to be used in conventional
compound and Oil filled boxes with air clearances. The design insures good insulation and impulse
performance inspite Of reduced clearances. The boots can be used with both paper and plastic
cables. ( Application/Voltage sizes as below )
Catalog
Number
Conductor
Size
Straight
Boots
Mod Code
ESlB-4ST/10-35 RSRB-
4022
B05 10-35
ESlB-4ST/50-95 RSRB-
4024
50- 95
ESlB-4ST/120-300 RSRB-
4026
807 120 - 300
ESlB-4ST/400-630
400 -
630
Catalog Conductor Size
Number
Right Angle
Boots
Long Code Short Mode
ESlB-4RU10-35 RSRB-4042 B08 ESIB-4RS,'10-35 RSRB-4062 815 10 -35
ESlB-4RU50-95 RSRB-4044 809 ESlB-4RS/50-95 RSRa-4064 816 50- 95
ESIB-4RU120-300 RSRB-4046 BIO ESlB-4RS,'120-300 RSRB-4066 B17 120 - 300
ESIB-4RL/400-630 400 - 630
ESIB-6RU70-500 (Upto 36KV) 70- 500
All kits are supplied as a set of 3.
6
ESIN SUPPORT INSULATORS
Raychem light weight insulators comprise Of a high strength flexible polymeric core housed in a
Raychem proven high voltage material. The insulators are supplied with a galvanised iron
mounting bracket and is used to support Raychem termination upto 36KV for outdoor use.
Catalog
Number Mode Code
Voltage
Rating
EStN-4
upto 17.5 KV
ESlN-6 B24 upto 36 KV
ESGL CABLE BOX GLANDS
Raychem cable box glands come complete with all the essential hardware for mounting the
Raychem terminations. Typically used on cable boxes designed for compound filling where the
distance from bushing to base plate is a limiting factor.
Catalog
Number
Conductor Size
Straight
25 : 95
ESGL-4S/3C 120 . 300 EAKT - 1606
120 300
630
Cable glands are available in aluminium for single core cable applications. Please contact local Raychem office tor
details.
ESPM EARTHING KITS
Raychem ear-thing kits are available for solderless earthing of metal tape shield for plastic cables.
Earthing kits are also available for steel wire, steel tape, aluminium wire, and corrugated aluminium
armour.
7
Catalog
Number
Core Dia. Conductor Size
One kit
contains 3-Core material
Mod Code 7.2 KV 17.5 KV 36 KV
-'655
16 - 25
ESPM-E-51 G56 - 24 - 15C 35 . 95 25 - 35
-1657 G5TJC6V25 goo - 185 50 - 70
ESP','-e-53 - 1 65B G58 31 • E3û 240 sac - 300
800, 1000 630-1000 400- 1000
Catalog Under Armoured Cable Dia Conductor Size
Number
ESPM.E.42 G37 33 - 95 . 400 70 - 400 16 - 185
-EMT-1638 51 - 500 - 800 500-800 240-630
1 pc per Kit
Mod Code 7.2 KV 17.5 KV 36 KV
ESPM-E-O EMT. 1636 G36 21 16 - 70 16 - 50
Armour Clamping Ring Design
8
ESPM-E-3E
185 - 400
95 - 240
ESIJ JOINTS For jointing cables upto 36KV Raychem offers a system based on heat shrinkable materials which is; fast and
simple to install; eliminates shelf life limitations, and offers high impact resistance and high earth fault current
capacity. Millions of cable joints upto 36KV installed in some of the most severe service conditions have
confirmed the reliability of the Raychem design under high electrical, thermal, and environmental stress.
Catalog Number Conductor Size
Upto 1 KV / Plastic
Four Conductors
Not Armoured Wire Armoured
ESlJ-OXJ4C 1.5-&'NA • ESlJ.OX]4C 1.5-
6/SA
1.5 -
6
ESlJ.OX/4C 6- 16/NA ESlJ-OX/4C 6-
16/SA
6 - 16
ESPM-E-48 EAKT- 1644 644 94 300 . 400 240 - 300 120 185
ESPM£-49 EAKT.1645 G45 70- 110 240 - 300
Catalog
Number
Under Armoured Cable Dia Conductor Size
Three Core. corrugated
aluminium or steel tape
armour, hose clamp design
7.2 KV 17.5 KV 36 KV
ESPM-E-35 25- 70 16 - 150 35-70
ESPM-E-37 90 - 120 300. 400 50 - 150
ESPM-E-47
Number Catalog Under Armoured Cable Dia Conductor Size
9
ESlJ-OXJ4C 25-
50/SA
25 50
ESlJ-OX,'4C 16-35/NA 16 - 35
ESlJ-OW4C 50-70/NA 35 - 70
ESIJ-OX/4C 70-150/NA ESlJ-OX/4C 70-150/SA 70 - 150
ESlJ-OW4C 185-300/SA 185 - 300
ESlJ-OXJ4C 150-300/NA 150 - 300
Catalog Number Conductor Size
Upto 7.2 KV / Plastic
One Conductor
mm2
Without Armour
ESlJ-2X/1C 25-50/NA 25 - 50
ESIJ-2X/1C 70-120/NA 70 • 120
ESlJ-2X/1C 150-185/NA 150 - 185
ESlJ-2XJIC 240-300/NA 240 - 300
Catalog Number Conductor Size
upto 7.2 KV / Plastic
Three Conductors
mm2
Without Armour Wire Armour
ESlJ-2X]3C 25-50/NA ESlJ-ŽX/3C 25-50/SA 25 - 50
ESlJ-2X/3C 70-120/NA ESlJ.2X/3C 70-120/SA 70 - 120
ESlJ-2X,'3C 150-185/NA ESlJ-2X/3C 150-185/SA 150- 185
ESlJ-2X}3C 240-300/NA ESlJ-2X'3C 240-300/SA 240 - 300
Catalog Number Conductor Size
Upto 12 KV / Plastic
One Conductor
Without Armour
10
ESIJ-3X/1C 16-25/NA 16 - 25
ESlJ-3X}1C 35-70/NA 35 - 70
ESlJ-3X/1C 95-150/NA 95 - 150
ESlJ-3X/1C 185-300\NA 185 - 300
Single core joints kits includes material for single phase only. ES13- 4x,'3C25-35/NA ESlJ-
4Xj3C25- 35/SA ESIJ-4W3C2S-WTA
- 25-35
Catalog
Number
Conductor Size
upto 12 KV / Plastic
Three Conductors
Without Armour Wire Armour
ESIJ.3X/3C16-3S'NA
ESlJ.3X/3C50-95,'NA ESlJ-3W3C50-95/SA so-gs
ESIJ-3W3C120-18S'NA ESIJ-3W3C120-18S.'SM
ESlJ-3X/3C240-300/NA ESlJ-3X/3C240-300,'SA 240 - 300
Catalog
Number Conductor Size
upto 17.5 KV / Plastic
One conductor
Without Armour
ESlJ-4X/1C25-35'NA
ESlJ-4XJIC50-95,'NA 50 • 95
ESlJ-4WIC120-185,'NA 120 - 185
ESlJ-4X'1C240-300/NA 240 • 300
ESIJ-4WIC400-630'NA 400 630
Catalog
Number
Conductor Size
upto 17.5 KV / Plastic
Three conductors
Without Armour Wire Armour
11
ESIJ.6X'1C35-70,'NA 35-70
ESlJ-6X'1095-150/NA
95 - 150
Single core joints kits
includes material for
single phase only.
Catalog
Number
Conductor Size
Upto 36 KV / Plastic
Three conductors
Without Armour Wire Armour Tape armour
ESlJ-6W3C35-7WSA ESIJ-6XßC35-70/TA 35-70
ESlJ-6X/3C95-150/SA ESlJ-6X/3C95-150/TA 95 - 150
ESlJ-6W3C185-3WSA ESIJ-6W3C185-300TA 185-300
ESlJ-6XJ3C400-
xxx,'SA
400
Ferrules are not included in the kits and should be procured separately.
ESlJ-4X'3C50-95{NA ESlJ.4X/3C50-9S/SA ESlJ-4Xt3C50-9S'TA so - 95
ESlJ-4W3C120-
18S'NA ESIJ-4W3C120-18S,TA , 120-
ESlJ-4X,'3C240-300/NA ESlJ.4XJ3C240-
300/SA
240 - goo
Catalog
Number
Conductor Size
Upto 36 KV / Plastic
One conductor
Without Armour
ESlJ-6WIC185400/NA 185-400
ESlJ-6X/1 C500-630/NA 500 • 630
12
SXAW SINGLE CORE AL ARMOURED JOINTS
Cable Joints with Aluminium wire Amour
Size of Conductor in mm2
70- 120
150-240
300-400
500-630
120- 185
185-400
500-630
Screened Polymeric
Insulated Cable
12 W to 36 W
120 -240
300 - 630
Single Core with
Al wire Armour
Kit Number
SXAW-3121
SXAW-3131
SXAW-3141
SXAW-3151
SXAW-5131
SXAW-5141
SXAW-5151
SXAW-6132
SXAW-6142
ECKJ CONTROL CABLE JOINTS This range provides heat shrinkable cable joints for multi-core, plastic control cables operating
upnto 1 KV, with armour.
Catalog Number Conductor Size
Number
Of Cores
For multi-pair cables with and without armour and multi core cables without armour please contact
your local Raychem office for details
ECKJ-OOI 8 8 - 14 I.o- 2.5
-ECKJ-0019 15-21 1.0-2 5
ECKJ-0020 22 - 40 I.o- 2.5
ECKJ-0021 41 -75 1.0-2.5
9
Catalog
Number
Conductor Size
Upto 36 KV / Plastic
Three conductors
Without Armour Wire Armour Tape armour
ESlJ-6W3C35-7WSA ESIJ-6W3C35-70/TA 35-70
ESlJ-6X/3C95-150/SA ESlJ-6X/3C95-150/TA 95 - 150
ESlJ-6W3C185-3WSA ESIJ-6W3C185-300TA 185-300
ESlJ-6XJ3C400-
xxx,'SA
400
Ferrules are not included in the kits and should be procured separately.
SXAW SINGLE CORE AL ARMOURED JOINTS
Cable Joints with Aluminium wire Amour
Size of Conductor in mm2
17SkV
70 - 120
150-240
300-400
500-630
120- 185
185-400
500-630
Screened Polymeric
Insulated Cable
12 W to 36 W
36 w
120 -240
300 - 630
Single Core with
Al wire Armour
Kit Number
SXAW-3121
SXAW-3131
SXAW-3141
SXAW-3151
SXAW-5131
SXAW-5141
SXAW-5151
SXAW-6132
SXAW-6142
ECKJ CONTROL CABLE JOINTS This range provides heat shrinkable cable joints for multi-core, plastic control cables operating
upnto 1 KV, with armour.
10
Catalog Number Conductor Size
Number Of
Cores
For multi-pair cables with and without armour and multi core cables without armour please contact
your local Raychem office for details
TRANSITION JOINTS
Raychem offers a wide range of heat shrinkable transition joints, upto 36KV, for any Of the
following configurations :
- Cables having a different cross sectional areas.
- Plastic to paper cables.
- Three core palsttic or paper cable to three single core plastic or paper cables.
Raychem could also help by designing a transition joint for you specific needs. Please
contact your local Raychem office for details.
MOTOR CONNECTION KITS
MCK heat shrinkable caps replace tape and filler putty methods of insulating connections in motor
conduit boxes. Each MCK kit connects a three lead motor.
ECKJ-OOI 8 14 I.o- 2.5
ECKJ-0019 15-21 1.0-2 5
ECKJ-0020 22 - 40 1.0 - 2.5
ECKJ-0021 41 -75 1.0-2.5
MCK-IV 1 KV 2.5 -6
MCK-2V upta 1 KV 56
MCK-3V Upto 1 KV 25-95 82
11
Stub
Splice
Type V
Catalog Vottage Feeder Lug Splice
Number Rating Size Len gth Configuration
Stub Splice
Type V
-5-1V-m upto 72 KV 6-35 127
MCK-5-2v-oo upto 7 Q KV 50 . 153
MCK£-3V-OO upto 72 KV 150 400 179
Type L
MCK-IL upto 1 KV 10 _ 95 127
MCK-2L. Upto 1 KV 120 • soo 210
Catalog Voltage Feeder Lug Splice
Number Rating Size Len gth Configuration
Stub Splice
Type L
MCK-5-1L-OO upto 7.2 KV 10 - 120 153
MCK.S.2L-OO upto 7.2 KV 1 50 - 500 179
AD / FH / IT TOOLS AND ACCESSORIES
MCK-4v Upto 1 KV 120 240 133
In-line Splice
12
A wide range of tools are available for cable preparation and heat shrinking.
Catalog
Number
Product
Description
Remarks
FH-1630-s-MC Torch Box
FH-1630-S-MC 10 Torch Assembly
FH-1630-S-HNZ Torch Handle with shut-off valve
FH.1630-s-HSZ Torch Handle with shut-off valve and gas consumtion reducer level
FH.1630-S-BN28 Nozzle flame dia 20mm, flame length ac$ustable from 200mm to 400mm
FH-1630-S-BN38 Nozzle flame dia 40mm, flame length adjustable from 200mm to 450mm
FH-1630-PlE-R1 Regulator
FH-1630-PlE-SW4 Hose constant pressure
FH-1630-PlE-SW5 Hose high pressure hose, 3m long, 12mm hose thickness
FH-1630-PlE-SWIO Hose high pressure hose, 5m long, 12mm hose thickness
FH-1630-PlE-CV Cut-off valve high pressure hose, 10m long, 12mm hose thickness
FH-1630-TH229 Torch holder bradet dia 229mm
FH-1630-TH300 Torch holder brad«et dia 300mm
1000-001 Tools kit Compact and comprehensive tools kit
FH-IOOO-OII Scoring tool for easy strip screen
FH-1000-013 Stripping tool for HV cable screen
FH-1000-014 channel pulling tool
Detailed information on the tool kit contents could be obtained upon request.
BUS BAR
13
BBIT 1 BPTM TUBING
BBIT and BPTM are heat shrinkable tubings for use on straight or bent bus bars where maximum
clearance reduction is required. Ideal for original equipment assembly or in retrofit applications
where access to one end is available. Provides insulation upto 36 KV and long term reliability even
at high continuous operating temperature.
Catalog Number
Rectangular
Bar profile
Round Bar
Diameter Spool
Length
(l + t) mm (d) mm
BPTM-50,'20-A'U 36-65 22-43 30 m
BPTM.7S'30-.ßVU 55 95 33 -63 30 m
BPTM-100/40-NU 70- 130 44 - 86 25 m
BPTM-120/SO-A'U 90- 165 55- 105 25 m
0BPTM-175,'70-NU 125 - 235 80- 150 15m
BPTM-205/110-A/U 200 - 276 127 - 190 10 m
m
BUS BAR
14
PPTM.235/130-A'U 235 315 150 - 220 20 m
CRSM WRAPAROUND CABLE REPAIR SLEEVE
CRSM wraparounds are used for the repair of plastic or lead cable sheaths. The adhesive coating
exhibits excellent bonding and sealing characteristic to all materials commonly used in the various
cable insulation sheath construction.
Catalog Cable Outer Dia. Standard Number Length
HVBT TAPE
HVBT is a heat shrinkable high voltage bus bar tape, designed to give the integrity of heat
shrinkable tubing with the versatility of a wraparound sleeve. The HVBT tape offers insulation for
upto 36 KV.
Catalog
Number
Tape
Width
Length
per roll
HVBT-12-A 25 10 m
HVBT-14-A 50 10 m
HVBT.15-A 75 10 m
HVBT-16-A 100 10 m
BUS BAR
15
LVBT LOW VOLTAGE BUS BAR TAPE
LVBT is a general purpose heat-shrinkable insulating tape suitable for applications upto I OOOV.
Catalog
Number
Tape
Width
Length
per roll
LVBT-I-R 25
LVBT-2-R 50
JLVBT-4-R 100
HVBT TAPE
HVBT is a heat shrinkable high voltage bus bar tape, designed to give the integrity of heat
shrinkable tubing with the versatility of a wraparound sleeve. The HVBT tape offers insulation for
upto 36 KV.
Catalog
Number
Tape
Width Length
per roll
HVBT-12-A 25 10 m
HVBT.14-A 50 10 m
HVBT-15-A 75 10m
HVBT-16-A 100 10 m
BUS BAR
16
LVBT LOW VOLTAGE BUS BAR TAPE
LVBT is a general purpose heat-shrinkable insulating tape suitable for applications upto IOOOV.
Catalog
Number
Tape
Width
Length
per roll
mm
LVBT-I-R 25
LVBT.2-R 50
LVBT-4_R 100
14
MWTM INSULATING & SEALING TUBING
Raychem heat shrinkable tubings can be used for general purpose cable splicing and electrical
insulation up to 1 KV.
MWTM is a medium wall tubing which can be used in low voltage terminations, joints, and cable repairs with or without adhesive coating,
ADHESIVE COATED TUBING,
Catalog Application Range Cut-piece
Number Min - Max Dia. Length
MWTM-IO,O-IOOO/S 3.5 -90 1000
MWTM-12/3-1000/S 3.5 10.8 1000
5.5 14.5 1000
MWTM-25/8-1000/S 9.0 - 22.5 1 000
MWTM-35/12-1000/S 13.0 -31.5 1000
MWTM-50/16-1000/S 17.5 _ 1000
MWTM-63/19-1000/S 21.0 - 57 0 1000
MWTM.70,'26-1000/S 23.5 - 63 0 1 000
MWTM-75/22-1000/S 24.0 - 68.0 1000
MWTM-85/25-1000/S 27.5 - 77.0 1000
32.5 - 81 1000
MWTM.95,'29-1000/S 32.0 - 86 0 1 000
MWTM-II 37.0 - 104.0 1000
MWTM-120/54-1000/S 49 _ 108 1000
MWTM-1u0/42-1000/S 46.0 - 126.0 1000
MWTM.160/50-1000/S 55_0 - 144.0 1 000
MWTM-164/68-1000/S 72 - 148 1000
MWTM-180/60-1000/S
MWTM.195/102-1000/S
66.0 - 162.0 1 000
92 - 176 1 000
MWTM could be also ordered Without the Inner adhesive coating Ordering example: MWTM-75/22-A/U.
WCSM INSULATING AND SEALING TUBING
15
WCSM is a heavy wall
tubing that can be
used as a general
purpose tubing and as
an integral part
WCSM-105/30-1000/S
33.0- 94 5 1000
102L CABLE END CAPS Cable caps are coated with a sealing adhesive coating. They provide an environment seal and upto 1
KV insulation at the cable end.
Catalog
Number
Application Range
Min - Max cable Dia.
102L011/S 4 - 8
102L022/S
102L027/S
102L033/S 17 -30
102L044/S 30 - 45
102L048S 45 - 65
102L050/S
102L055/S 65-95
102L066/S 95- 115
302K / 502K CABLE BREAKOUTS
Cable breakouts provide reliable environmental sealing and insulation to conductor in
multiconductors sheathed or armoured cable and conduit ends. (LOW Voltage)
WCSM-51 ,'16-1000/S 17.5 - 46.0 1 000
WCSM-70/21-1000/S 23.0-63 0 1000
WCSM-85/25-1000,s 27.5 - 76 5 1000
1000 WCSM-130,'36-1000/S 40.0- 117.00
of Raychem Joints upto 1 K V.
38 10 00
16
Catalog
Number NO. OF CORES Conductor Size
302K333/S 2 4 - 25
302K224/S 2 35 - 150
302K466,'S 2 185 - 300
402W533/S 3 4 - 35
402W516,s 3 50- 150
402W526/S 3 185 - 300
502K026/S 4 185 - 300
502K033/S 4 4 - 35
502K046,'S 4 35 - 70
502KO 161S 4 70- 150
Raychem also supplies breakouts with more than four conductors.
RNF-IOO GENERAL PURPOSE TUBING
RNF-100 is a flexible, general purpose tubing. Designed for a wide range of applications, RNF-IOO is
used extensively for Insulation, light weight harness jackets, colour coding, and identification.
Available In clear or standard colours. Can be rapidly installed using a variety of heating tools.
Catalog
Number
Application Range
Min - Max Dia. Spool
Length*
1.2m
Length
Colour
Code
information
Colour
RNF-100-3/64-X 0.6 - 1 2 300 m 30 m Black
• Minimum order quantity is 1 spool.
RNF-100-3-X 38.0 - 76.0
17
TMS WIRE MARKING SLEEVE Thermofit Marking Sleeves are heat shrinkable permanent wire markers. TMS is used in a variety ot
markets to provide permanent and legible identification for all kinds of wire and cable applications.
Catalog Application Range Pcs/roll Number Min — Max dia.
TMS-3/16,WHlTE
Upto 1B characters can be printed on each sleeve by using a standard electric typewriter.
For details of complete TMS system please contact your Raychem representatives.
RayMark - Computer printable labels designed to withstand the harshest environments available. Please contact your local
Raychem Office for more details.
TMS.l/4/WHlTE 3.5 - 6.0 2500
TMS.3/8/WHlTE 5.0 - 9 0 1500
7.0 - 12 0 1500
TMS-3/4,WHlTE 10.0 - 18.0
2.5 - 4.5 2500
tqca Energy
Division Bectronics
CAPABILITIES:
• Cables Accessories
• Insulation and Protection
• Connectors and Fittings
• Electrical Equipment
For more information and assistance please contact our sales office
Recommended