View
313
Download
1
Category
Preview:
Citation preview
REOVIB MFS 268
Frequency controller for vibratory feeders
Description
Dimension drawing
º Adjustable current limiter
º Sinusoidal output current
• Mains voltage compensation• Suitable for 110 V and 240 V
supplies• Internal setpoint using display,
external with potentiometer• Enable input 24 VDC or contact• Adjustable frequency range of
5...300 Hz• Adjustable frequency range limits• Automatic optimum frequency
search• Operation via LED display and
keypad• Feeder start/stop keys in the
touch panel• Memory storage for user settings• All settings can be made without
opening the unit• Integrated track control and
external with0...+10 V, DC 0(4)...20 mA,potentiometer 10 kW
Enable: 24 V, DC or contactStatus relay: Change-over contacts 250 V, 1 ATrack control: internal supply 24 V, DC for
PNP-sensorremote-parametrisation of all functions:
Amplitude control: sensor connection:e.g. for type REOVIB SW 10
Irrtümer und Änderungen vorbehalten
Stand: 03.08.2012
amplitude regulation
Type
Input voltage: 110 V, 240 V, ±10 %, 50/60 HzOutput frequency: 5...300 HzOutput voltage: 0...95 V, 0...205 VOutput current: 3 A 6 A 8 A 16 ASetpoint: internal over display
The REOVIB MFS 268 series of variable-frequency regulators are speciallydesigned for controlling vibratory feeders. These units are available withDeviceNet, PROFIBUS-DP, RS232 interface, ProfiNet or EtherNet-IP interface. The units produce a highly stableoutput frequency that is adjustable in 0.1 Hz increments. Manual tuning time of the mechanical feed system is significantly reduced. The sinusoidal output meansthat the feeder runs quielty and provides gentle product handling characteristics.Settings are adjusted by using the touch-panel and the integrated digital display.The feed rate setpoint can be adjusted in several ways, including the use of 0...10V, DC or 0(4)...20 mA signals. For user parameter sets can be stored andrecalled. There is a current limit setting that is used to protect the electromagneticcoil against overloads. The frequency range window can be used to limit theadjustment band available to the user. Track controller and amplitude feedbackintegrated within the unit. The electrical connection is effected over terminals inthe front panel.The fixing is designed for the mounting on a plate in the cabinet.
dependingon design via DeviceNet, PROFIBUS-DP, RS232, ProfiNet or EtherNet-IP
REOVIB MFS 268DeviceNet, PROFIBUS-DP
RS232 interfaceEtherNet-IP
ProfiNet
Ambient temperature: 0...+45 °CProtection: IP 20
Irrtümer und Änderungen vorbehalten
Recommended