View
428
Download
10
Category
Preview:
Citation preview
RMD Kwikform Hong KongSuperslim
PRODUCT BROCHURE
Product OverviewThe Superslim soldier is the definitive formwork primary beam. Robust and easily assembled into beams of almost any length, the Superslim soldier can be used in numerous temporary works applications.
FasterStandard fixtures and clamps ensure optimum on site efficiency.
Formwork ties and other components can be fixed almost anywhere along the Superslim Soldier's length allowing for best on site productivity and optimum scheme design.
Robust to cope with the demands of frequent reuse providing easy assembly and consistency for optimum fabrication on site.
SaferManufactured from high yield steel to provide maximum load capacity.
Proven performance time after time.
EasierCompatible with all other RMD Kwikform product ranges making it extremely versatile.
Huge range of standard accessories provide the versatility to tackle an almost limitless range of applications.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
1
ApplicationsAvailable in nine lengths, and with a comprehensive range of accessories, the Superslim Soldier can be assembled into:
Wall formwork panels of virtually any shape or size
Bridge cantilever edge and deck supports
Composite bridge deck formwork
Travelling gantries
Vertical and raking shores
Spanning beams and trusses
Support structures for temporary site buildings
Façade retention / space frames
Superslim The definitive formwork primary beamPRODUCT BROCHURE
2
Features & BenefitsThe Superslim Soldier has unrivalled strength-to-weight ratio, versatility and range of accessories and can be re-used on site after site, in numerous temporary works applications.
Any length of beamNine standard lengths, from 10mm to 3600mm, give almost unlimited scope for assembling beams of virtually any length.
VersatileVersatlity to tackle diverse applications demanded by major projects - gantries, shoring, spanning trusses and frames, as well as formwork panels.
CompatibleFully compatible with other RMD Kwikform product ranges and, in many cases, with customers’ own equipment.
Freedom to createComplete freedom to create the optimum design, whatever the application.
Precisely manufacturedCombines maximum durability and load capacity with reduced unit weight.
RobustEasy assembly and consistently accurate fabrication on-site.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
3
In DetailCan be assembled into practically any lengthBecause they can be assembled into practically any length, Superslim soldiers are frequently used as raking push-pull props, as well as vertical shoring.
Ideal as primary beamsSuperslim soldiers are ideal as primary beams on shoring or scaffolding to support reinforced concrete slab construction.
Can be assembled with ease into frames and trussesUsing system clamps, scaffold tube and other accessories, Superslim soldiers can be assembled with ease into frames and trusses for façade retentions, multi-level supports to temporary site offices, cantilever supports, exhibition stands and film sets.
Construct straight, curved, conical or other formwork configurationsWhen using a plywood form face together with one of RMD Kwikform’s Aluminium secondary beams or timber beams, Superslim soldiers can be used to construct straight, curved, conical or other complex formwork configurations: RMD Kwikform supplies brackets for attaching access walkways on formwork panels.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
4
Components
Superslim The definitive formwork primary beamPRODUCT BROCHURE
5
Components
Code Description Weight
SSX10040 Superslim End Plate 10mm 2.9kg
SSX10090 Superslim Soldier 90mm 7.3kg
SSU10035 Superslim Soldier - 360mm O/E 11.7kg
SSX10180 Superslim Soldier 180mm 8.7kg
SSH10270 Superslim Soldier 270mm 10.6kg
SSX10360 Superslim Soldier 360mm 11.9kg
SSX10540 Superslim Soldier 540mm 15.2kg
SSX10720 Superslim Soldier 720mm 18.7kg
SSX10900 Superslim Soldier 900mm 22.0kg
SSA11260 Superslim Soldier 1260mm 25.5kg
SSX11800 Superslim Soldier 1800mm 38.8kg
SSX12700 Superslim Soldier 2700mm 55.4kg
SSX13600 Superslim Soldier 3600mm 72.2kg
SSX90090 Superslim Soldier 90mm Galvanised 7.3kg
SSX90180 Superslim Soldier 180mm Galvanised 8.7kg
SSH90170 Superslim Soldier 270mm Galvanised 10.6kg
SSX90360 Superslim Soldier 360mm Galvanised 11.9kg
SSX90340 Superslim Soldier 540mm Galvanised 15.2kg
SSX90720 Superslim Soldier 720mm Galvanised 18.7kg
SSX90900 Superslim Soldier 900mm Galvanised 22.0kg
SSA91260 Superslim Soldier 1260mm Galvanised 25.5kg
SSX91800 Superslim Soldier 1800mm Galvanised 38.8kg
SSX92700 Superslim Soldier 2700mm Galvanised 55.4kg
SSX93600 Superslim Soldier 3600mm Galvanised 72.2kg
Superslim Soldier Beams
AWL = 20kNm bending / 150kN tension
Code Description Weight
SSU10010 Superslim Joint Stiffener 1.4kg
BNM16110 M16x110 Bolt Gr8.8 BZP 0.2kg
BNA11600 M16 Nut gr8 BZP 0.03kg
Joint Stiffener
AWL = 30kN / pair
Code Description Weight
SSU10032 Superslim Lifting Plate 15kN 3.2kg
SSX10044 Superslim Pin 19mm 0.3kg
SSA10095 Spring Clip 0.01kg
SSA10125 Superslim Lifting Plate 4.65kg
Lifting Plate
Superslim The definitive formwork primary beamPRODUCT BROCHURE
6
Components
AWL on the bracket = 3.2kN UDL
Code Description Weight
SSU10031 Superslim Access Bracket 6.7kg
Access Bracket
For creating a heavy duty raking shore and connecting to another soldier.
Code Description Weight
SSA10345 Superslim Soldiers Strut Adaptor 4.1kg
SSA20010 Jack Left Hand - Blue 12.8kg
SSA20011 Jack Right Hand - Red 12.8kg
Superslim Soldiers Strut Adaptor & Slimshor Jacks
Adjustable range = 70 - 200mm, WLL = 37kN (LSCF = 1.5)
Code Description Weight
SSA20001 Superslim Soldier Plumbing Jack 5.2kg
Superslim Soldier Plumbing Jack
Code Description Weight
SSH30083 Superslim Turnbuckle 360 - 400mm 4.8kg
SSH30084 Superslim Turnbuckle 400-500mm 5.2kg
SSH30086 Superslim Turnbuckle 500-600mm 5.3kg
SSH30085 Superslim Turnbuckle 600-700mm 5.7kg
SSH30079 Superslim Turnbuckle 620-935mm 5.45kg
SSA10265 Superslim Turnbuckle 930-1235mm 7.23kg
SSH30082 Superslim Turnbuckle 1225-1500mm 8.55kg
SSA10275 Superslim Turnbuckle 1520-1832mm 10.66kg
PRA70001 Push Pull Prop Long 3050-5530mm 25kg
PRA70015 Push Pull Prop Short 1820-3100mm 16.5kg
Turnbuckles and Plumbing Foot
AWL = 10kN
Code Description Weight
SSX10042 Superslim Form Support Plate 5.3kg
BNU16007 M16x40 Set Pin gr8.8 BZP 0.09kg
BNU16001 M16 Nut gr8.8 BZP 0.03kg
Support Plate
Superslim The definitive formwork primary beamPRODUCT BROCHURE
7
Components
Connects Soldiers to timber waling
Code Description Weight
BNU10054 Bolt - Metric Waling 117x117 0.3kg
BNU10055 Bolt - Metric Waling 176x127 0.4kg
SSU10017 Waling Clamp Plate 0.4kg
BNX20014 Washer - Plate 50x50x6x18mm 0.1kg
BNU16001 M16 Nut gr.8.8 BZP 0.03kg
Timber Waling Clamp Assembly
AWL = 3.25 kN / pair
Code Description Weight
PRA10015 "B" Clamp 0.7kg
B Clamp
AWL = 6.25kN in slip / each
Code Description Weight
SSU10024 Slimshor Tube Clamp 1.3kg
Slimshor Tube Clamp
Connects scaffold tube to the soldier (does not project above the tube surface)
Code Description Weight
BNX16007 M16x220 Bolt gr8.8 BZP 0.4kg
BNX20020 Washer - Channel 150x75x18mm 0.7kg
RPX10008 'G' Clamp - Tube Type M16 0.6kg
'G' Clamp
Code Description Weight
SFX10018 Half Coupler 0.5kg
BNA11632 M16x40 Set Pin gr8.8 C/Snk HTZP 0.05kg
BNA11600 M16 Nut gr8.8 BZP 0.03kg
Half Coupler
Superslim The definitive formwork primary beamPRODUCT BROCHURE
8
Components
Code Description Weight
SSU10017 Superslim Waling Clamp Plate 0.4kg
BNU16002 M16 Round Washer BZP 0.1kg
BNM16110 M16x110 Bolt gr8.8 BZP 0.2kg
BNA11600 M16 Nut gr8.8 BZP 0.03kg
Waling Clamp Plate
Code Description Weight
AFX20015 Clamp - Superslim 0.14kg
AFX20022 Bolt M12 Uni-fix 0.05kg
BNA11200 Nut Hex M12 0.02kg
AFX20012 Clamp Assembly - Superslim 0.2kg
Alform Superslim Clamp
Code Description Weight
ALX10001 Universal Clamp 0.7kg
Universal Clamp
Code Description Weight
ALX10002 Flange to Flange Wedge Clamp 0.5kg
Flange to Flange Wedge Clamp
Code Description Weight
ASX10056 Alshor Superslim Clamp 0.7kg
Alshor Superslim Clamp
Superslim The definitive formwork primary beamPRODUCT BROCHURE
9
Components
Code Description Weight
BTX10004 Waler Plate - Heavy Duty 90kN 1.8kg
BTX10014 Waler Plate - Light 55kN 1.1kg
BTX10021 Waler Plate - Standard 70kN 1.4kg
15mm Rapid Tie Waler Plates
Code Description Weight
HTU10014 Waler Plate - Angle 3/4" 70kN 1.3kg
15mm Rapid Tie Angle Waler Plates
Code Description Weight
BTX10029 Waler Plate - Hi Load 160kN 6.8kg
20mm Rapid Tie Waler Plates
Code Description Weight
SSX10039 Porthole Bearing 65kN 2.0kg
SSA10305 Superslim B/T Connector 19mm dia 1.0kg
Porthole Bearing
Spreads and transfers loads from Superslim props where length adjustment is necessary - AWL=150kN (100kN when load is released via the jack handle).
Code Description Weight
SFU10025 Superslim Adjustable Base 365-515mm 19.0kg
Adjustable Base
Superslim The definitive formwork primary beamPRODUCT BROCHURE
10
Components
Supports header beams where length adjustment is required - Adjustable range 440-590mm - AWL= 150kN ( 100kNwhere length adjustment is required)
Code Description Weight
SSU10026 Superslim Adjustable Head 440-590mm
24.6kg
AFX20003 Clamp Plate 0.1kg
BNA11205 M12x25 Set Pin gr8.8 BZP 0.04kg
BNA12030 M12x30 Set Pin gr8.8 BZP 0.04kg
BNA11200 Nut Hex M12 0.02kg
Adjustable Rocking Head
Maximum angle of tilt = 28 degrees, AWL=150kN
Code Description Weight
SSU10023 Superslim Rocking Head 36mm 4.3kg
BNX10005 M10x20 Set Pin Gr 8.8 BZP 0.02kg
SSU10029 Rocking Head Washer - M10 Galv 0.02kg
Rocking Head
Code Description Weight
SSX10041 Superslim Prop Support Plate 6.3kg
BNX20027 M20x45 Set Pin gr8.8 BZP Csk 0.2kg
BNA12000 M20 Hex Nut gr8 0.06kg
Superslim Prop Support Plate
AWL = 65kN / Pivot
Code Description Weight
SSU10019 Superslim Corner Pivot 7.3kg
Corner Pivot
Connects a heavy duty push-pull prop to the porthole of another soldier - AWL = 65 kN
Code Description Weight
SSU10012 Spade End Link - Prop 3.1kg
SSU10004 Superslim Prop Pivot Tube 1.8kg
Prop Spade End Link & Prop Pivot Tube
Superslim The definitive formwork primary beamPRODUCT BROCHURE
11
Components
AWL = 100kN
Code Description Weight
SSU10038 Superslim Prop Connector 100kN 6.8kg
100kN Prop Connector
Used to connect Superslim push-pull props to Megashor shafts - AWL = 100kN
Code Description Weight
SSU10013 Superslim Prop Tube End Link 2.9kg
SSX10051 Superslim Short Prop Tube End Link 1.8kg
Prop Tube End Links
Converts soldiers into heavy duty push-pull props - Adj Range = 405-635mm / AWL = 100 kN
Code Description Weight
SSU10007 Superslim Prop Jack (LH) 14.5kg
SSU10008 Superslim Prop Jack (RH) 14.5kg
Prop Jacks LH and RH
Connects heavy duty push-pull props to a surface - AWL = 100 kN
Code Description Weight
SSU10034 Superslim Tilt Plate 4.8kg
BNU24001 Nut - Hexagon M24 0.06kg
BNX24002 M24x110 Bolt gr8.8 BZP 0.5kg
SSA10130 HD Universal Tilt Plate 5.8kg
Tilt Plate
Used in horizontal & vertical plumbing & levelling applications. Range 115mm closed to 400mm fully open.
Code Description Weight
SSX90043 Superslim Universal Soldier Jack 5.6kg
SSA20001 Superslim Plumbing Jack 5.2kg
Universal Soldier Jack
Superslim The definitive formwork primary beamPRODUCT BROCHURE
12
Components
Code Description Weight
SSU10003 Superslim 90 Degree Corner 8.7kg
SSU10005 Superslim 45 Degree Corner 8.0kg
Corner Angles
Range = 55 degrees min, 220 degrees max
Code Description Weight
SSU10028 Superslim Pivot Cleat set 8.8kg
SSA10350 Superslim Hinge Assembly 9.7kg
Pivot Cleat Set
Code Description Weight
SSX10037 Superslim Pivot Corner 20mm 4.1kg
Pivot Corner
A node to connect six soldiers at right-angles
Code Description Weight
SSU20006 Multi Slim 6-Way connector 25.0kg
SSA10300 Superslim 6-Way Connector 25.0kg
6-Way connector
Code Description Weight
SSU20066 6 Way Double Connector 37.7kg
6-Way Double Connector
Secures the end of a soldier to a floor or wall - AWL: = 70 kN Tension / 90 kN Shear
Code Description Weight
SSU10036 Anchor Plate 7.40kg
SSA10105 Superslim Hold Down Plate 9.4kg
Anchor Plate
Superslim The definitive formwork primary beamPRODUCT BROCHURE
13
Components
Code Description Weight
SSX10048 Superslim Safety Latch 1.6kg
Safety Latch
Code Description Weight
SSU10037 Superslim Klik Klak Latch 3.9kg
Klik Klak Latch
Code Description Weight
SSU10044 Klik-Klak Wall Pocket 1.7kg
SSU10030 Superslim Klik/Klak Wall Bracket 6.6kg
BNU20016 M20x130 Bolt gr8.8 BZP 0.4kg
BNU20003 M20 Round Washer BZP 0.03kg
Klik Klak Wall Pocket
Used to attach and spread chains in lifting applications - AWL = 45kN per unit. AWL of Spreader Beam = 90kN (see technical data sheets)
Code Description Weight
SSX10052 Spreader Beam Adaptor Assembly 19.4kg
SSA10001 Spreader Beam Adaptor 8.7kg
Spreader Beam Adaptor
Code Description Weight
SSM00007 Fixed Strut Adaptor 16.0kg
SSM00008 Fixed Strut 2896mm 39.0kg
Fixed Strut & Adaptor
Code Description Weight
SSM10540 Single Sided Beam 540mm 16.0kg
Single Sided Beam
Superslim The definitive formwork primary beamPRODUCT BROCHURE
14
Components
Code Description Weight
SSM00001 Single Sided Corner 540 x 540mm 30.0kg
Single Sided Corner
Code Description Weight
PRA70001 Push Pull Prop Long 3050-5530mm 25.0kg
Push Pull Prop Long
Code Description Weight
PRA70015 Push Pull Prop Short 1820-3100mm 16.5kg
Push Pull Prop Short
Code Description Weight
SSA60001 Brace Connector 1.9kg
Brace Connector
Code Description Weight
SSA10090 Handrail Post A 8.4kg
SSA10093 Handrail Post B 7.9kg
Handrail Posts
Code Description Weight
SSA10145 Walkway Base 8.4kg
Walkway Base
Superslim The definitive formwork primary beamPRODUCT BROCHURE
15
Components
Code Description Weight
SSA10115 Walkway Base Adaptable Platform 4.3kg
Walkway Base Adaptable Platform
Code Description Weight
SSA10250 Wheel Assembly 250 19.0kg
Wheel Assembly 250
Code Description Weight
SSA10150 Wheel Assembly 150 11.1kg
Wheel Assembly 150
The Base allows Super Slims used as raking shores to be used at any angle. It’s used at the lower end of the shore and connected to the Jack end using the Pivot Pin. It’s used at both ends of the raking shores when supporting precast units. It includes ground anchorage holes for securement.
Code Description Weight
SSA10130 Slimshor Universal Tilt Base 5.5
Slimshor Universal Tilt Base
Used with a Jack Spanner, the Foot Jack Adaptor can manually adjust the height of the vertical shore applications where the rotation of the Soldier isn’t possible. It’s designed to be used with Jacks, it helps to distribute the load.
Code Description Weight
SSA20020 Slimshor Foot Jack Adaptor Foot Jack Adaptor
5.7
Slimshor Foot Jack Adaptor
Code Description Weight
SSA10105 Superslim Holding Down Plate 9.4kg
Holding Down Plate
Superslim The definitive formwork primary beamPRODUCT BROCHURE
16
Components
Allows connection of a soldier at 90 degees along the length to another Superslim Soldier. WLL = 40kN in tension (LSCF = 1.5)
Code Description Weight
SSA10025 Superslim Soldier End Plate Adaptor 1.7kg
Superslim Soldier End Plate Adaptor
Code Description Weight
SSA10080 Single Sided Soldier 35.0kg
Single Sided Soldier
Code Description Weight
SSA10075 Tie Beam 37.5kg
Tie Beam
Code Description Weight
SSA10170 Tie Down Bracket 51kg
Tie Down Bracket
Superslim The definitive formwork primary beamPRODUCT BROCHURE
17
Components
Code Description Weight
BNA11635 Bolt M16 X 40 G8.8 ZP 0.09kg
BNA11600 Nut Hex M16 0.03kg
BNA21600 Washer M16 0.02kg
BNA12000 Nut Hex M20 0.06kg
BNA22000 Washer M20 0.02kg
BNA12400 Nut Hex M24 0.1kg
BNA2400 Washer M24 0.05kg
BTA10020 20mm Bar Tie Half Nut 0.2kg
BTX10005 20mm Bar Tie Full Nut 0.4kg
BTA10004 Bar Tie Full Nut 15mm 0.2kg
BTX10001 Bar Tie Wing Nut 15mm 0.34kg
SSX10044 Connecting Pin 19mm 0.2kg
SSA10050 Pivot Pin 25mm 0.9kg
SSA10095 Spring Clip 0.01kg
BTA11020 Bar Tie Wing Nut 20mm 0.6kg
BTX30015 Bar Tie 15mm 1.5kg
BTX40100 Bar Tie 20mm 2.46kg
BTA10004 Bar Tie 15mm Full Nut 0.21kg
BTH10005 Bar Tie 15mm Cast Full Nut 0.21kg
Bolts, Nuts & Accessories
Superslim The definitive formwork primary beamPRODUCT BROCHURE
18
ServicesOur added value sets us apart...
Consultancy & DesignOur technical sales staff will work with you to identify project requirements, analyse formwork options, planning, design and safety specifications. Early involvement ensures the best results.
Engineering ExpertiseOur experienced engineering design staff will translate your requirements into cost effective formwork and shoring design solutions, tailored to the exacting needs of the project. By combining our designers knowledge, flair and experience of the capabilities of our equipment range, the systems we design are innovative, practical and cost effective.
Technological AdvancementsRMD Kwikform is proud to be leading the way in the development of technological support. Integrating 3D CAD design throughout the business, coupled with in house design programs specifically for RMD Kwikform products, our customers can now benefit from seeing their vision come to life. We can translate complicated requirements quickly and easily.
On Site Technical AssistanceTrained Site Assistance Technicians can be on hand to provide practical guidance on how best to utilise our equipment in a safe and efficient manner, as well as provide solutions for required design variations due to on site conditions.
Equipment AvailabilityWith dedicated equipment storage yards across the globe, RMD Kwikform can respond quickly and easily to our customers requirements. With access to extensive regional networks, our customers are able to benefit from availability, flexible delivery and improved equipment storage. A high quality fleet, delivered when its needed, on time, in full.
Live Demonstrations & Training FacilitiesRMD Kwikform provide customers with product demonstrations, allowing a more detailed understanding of the benefits our equipment can provide. We also offer hands-on practical training in the safe and efficient use of our products, undertaken either at our demonstration facilities or on our customers site ensuring they have all the knowledge they need to work safely with our equipment.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
ContactsRMD KWIKFORM HONG KONGHONG KONG OFFICE22/F Excel Centre, 483A Castle Peak Road, Cheung Sha Wan, Kowloon, Hong KongTel: +852 2415 4882Fax: +852 2745 0232Email: rmd.hongkong@rmdkwikform.com
HONG KONG BRANCHTel: +852 2483 1933Fax: +852 2483 1935Email: rmd.hongkong@rmdkwikform.com
WORLDWIDE CONTACTSRMD KWIKFORM UNITED KINGDOMTel: +44 1922 743743Email: info@rmdkwikform.com
RMD AUSTRALIATel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: rmd.australia@rmdformwork.com
RMD NEW ZEALANDTel: Tel: 9 259 0353Fax: Fax: 9 276 6732Email: rmd.auckland@rmdformwork.com
RMD KWIKFORM SINGAPORETel: +65 6863 4252Fax: +65 6863 4275Email: rmd.singapore@rmdkwikform.com
RMD KWIKFORM PHILIPPINESTel: +632 696 7635Fax: +632 661 6456Email: rmd.manila@rmdkwikform.com
RMD KWIKFORM UAETel: +971 6 553 4173Fax: +971 6 553 4327Email: rmd.uae@rmdkwikform.com
RMD KWIKFORM QATARTel: +974 4465 3034Fax: +974 4465 3282Email: rmd.qatar@rmdkwikform.com
RMD KWIKFORM BAHRAINTel: +973 1738 2724Fax: +973 1738 2624Email: rmd.bahrain@rmdkwikform.com
RMD KWIKFORM OMANTel: +968 2413 7828Fax: +968 2413 7998Email: rmd.oman@rmdkwikform.com
RMD KWIKFORM SAUDI ARABIATel: +966 13 896 8665Fax: +966 13 896 8664Email: rmd.ksa@rmdkwikform.com
RMD KWIKFORM INDIATel: +91 44 6693 3300Email: rmd.india@rmdkwikform.com
RMD CHILETel: +56227149800Email: rmd.chile@rmd.cl
RMD KWIKFORM USATel: +1 303 252 7000Fax: +1 303 252 7319Email: usa@rmdkwikform.com
RMD KWIKFORM SOUTH AFRICATel: +27 12 004 1000Email: info.sa@rmdkwikform.com
RMD KWIKFORM IRELANDTel: +353 (0)1 830 2500Fax: +353 (0)1 830 2741Email: info@rmdkwikform.com
RMD KWIKFORM ESPAÑATel: +34 91 555 6104Fax: +34 91 555 4745Email: rmd.madrid@rmdkwikform.com
RMD KWIKFORM DBMETel: +971 6 553 4173Fax: +971 6 553 4327Email: rmd.me@rmdkwikform.com
RMD KWIKFORM PANAMATel: +507 280.0869Email: rmd.panama@rmdkwikform.com
RMD KWIKFORM COLOMBIATel: +57 321 214 71 18Email: rmd.bogota@rmdkwikform.com
Superslim The definitive formwork primary beamPRODUCT BROCHURE
www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.
The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.
An Interserve Company
Recommended