How to connect 8 in 1 Adblue Emulator NOx Sensor with truck

8 in 1 Truck Adblue Emulator with programming adapter and NOX Sensor Emulation is

designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4

and 5 exhaust emission rates made by Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and

Ford.

How to use the truck adblue emulator 8 in 1 removal tool ?

1) Install truck adblue emulator 8 in 1 programming software follow the video instruction

https://www.youtube.com/watch?v=SmmF4B1MnOg

2) Connect 8 in 1 adblue emulator OBD2 emulation adapter with truck

Check the Pinout cable in our QC Mark and connect the cables with vehicle follow the QC

instructions:

Red-24(+15)

Brown- CANL

Grey-24(+20)

Black-GND (Han-Ground)

White-CANH

1) RED (+15). To be connected to a 24V source enabled when the engine key is in the ON

position. This connection will supply power to the minusble Module when the engine key is on

(dashboard on).

2) BLACK(GND 0V). To be connected to an earth/gound.

3) GREY (+20). To be connected to a 24V supply always available to the Existing adblue system

(F4 protection fuse and the adblue system).

4) WHITE(CAN H). To be connected to CAN H of the system.

5) BROWN(CAN L). To be connected to CAN L of the system. The connections must be made

under the box of the connectors located under the protection cover of the radiator (passenger

side). The conductor of the ground of the adblue has the number 0000, but it is possible to use

another ground conductor found by a multimeter.

Document Reference:

Truck Adblue Emulator 8 in 1 software installation and connection, truck adblue system diagram

http://blog.obd2express.co.uk/2015/03/14/truck-adblue-emulator-8-in-1-software-installation-and-

connection/

Detail user manual, please check the software CD in the package.

If you need Adblue Emulator for one specific truck maker（MAN, VOLVO, Renault, Iveco,

Scania, DAF, Mercedes-Benz），please check here: http://www.obd2express.co.uk/search/?q=adblue