ABRASIVES FOR - KGS DIAMOND

Proud Manufacturers ofSWISS DIAMOND TECHNOLOGY®

Innovators since 1952






Innovators since 1952 www.kgs.swiss/construction

ABRASIVES FOR CONSTRUCTION MATERIALSDiamond Tools and Accessories

Chemicals

Polishing

Accessories

Cutting Grinding

Machines









KGS DIAMOND - Abrasives for Construction Materials Page 2

A HISTORYOF INNOVATION

KGS DIAMOND, with its headquarters in Switzerland, is a world leading abrasivesINNOVATION company since 1952.

KGS not only patents its newest inventionsand innovations on a regular basis but alsocontrols unique and automated, proprietaryproduction technologies, which guarantee an attractive cost base giving us the ability to compete with any manufacturer globally.

Further advantages of these abilities are a high reliability and reproducibility of our products. All this translates into “Swiss Diamond Technology®”.

Our values are our commitment to you with State of the Art Products and Services, Reliability and Accountability.

I personally stand by our commitment, so,do not hesitate to contact me for commentsand suggestions at [email protected].

Yours sincerely,Sandro FerronatoPresident & CEO


KGS DIAMOND a technology driven company.

The history of KGS DIAMOND starts in 1952 when Natale Ferronato founds a company near Zürich, Switzerland, producing cold bonded quality abrasives, mainly for grinding and polishing applications: Natale Ferronato & Co. In the next years the production activities expand with the introduction of sintering production methods. In 1970 Natale Ferronato passes the management responsibility to his wife Maryse Ferronato, who is succeeded in 1980 by Sandro Ferronato, today’s President and CEO. In 1985 the company is renamed to KGS DIAMOND. In the next years a strong international development starts and the company opens sales offices around the world and acquires new production facilities.

KGS is a globally active company – with Swiss roots. In order to be close to our customers we have a global sales and distribution network with 18 companies in 13 countries in Europe, North America, Middle East, and Asia providing engineered solutions for hard to grind & brittle materials in Aerospace, Glass, Porcelain, Electronics, Automotive, Construction, Stone and Floor related markets. 5 manufacturing sites – located in Switzerland, The Netherlands, Hungary, Portugal and the United Arab Emirates – providing a wide range of diamond tools, flexible diamond abrasives and premium coated abrasives.


Introduction

In our new catalogue, "Abrasives for Construction Materials", you will find a complete range of KGS Diamond Abrasives and accessories suited for cutting, grinding and polishing any type of construction material.

In just 4 steps, using the information listed below, you can find your product:1. Material2. Type of Process3. Application / Use4. Quality

The catalogue includes product and system solutions for resin and metal bonded tools, flexible diamond grinding tools, and sintered and electroplated tools.

In this catalogue, you will find a complete KGS DIAMOND product range suited for both wet and dry grinding of hard stone, soft stone, ceramic, engineered stone, and concrete. In addition, you will find a completely new program, "Stone Care," offering innovative solutions for ongoing care of hard surfaces.


Index

Using our Tool-Matrix on page 18, you can find the right tool for your needs in just 4 steps.

Technical product information can be found on pages 6-19. For further information, please call us at +31 525 68 33 00 or send us an e-mail at [email protected]

Application / Use Page Product

Cutting & Grinding Angle Grinders

20 Cutting Discs

Heavy Material RemovalAngle Grinders

28 Grinding Discs

Grinding & Polishing Angle Grinders

36 Polishing Discs

Grinding & Polishing Corner Sanders

40Delta

Polishing Pads

Grinding & Polishing Hand Sanding & Polishing

42 Handpads

Grinding & Polishing Sharpening

45 Whetstones

Cutting, Grinding & Polishing 46 Toolkits

Cleaning, Protecting & Care 52Stone CareProgram

Machines 68 Handheld Machines

Accessories 72 Mounting Systems


Diamond Abrasives for Construction Materials

Cutting, Grinding and Polishing of Construction MaterialsKGS DIAMOND offers a wide range of diamond tools for both wet and dry grinding that cut, grind, and polish both natural and engineered stone, ceramic products and concrete surfaces.

KGS Diamond products are versatile and can be used across a broad range of applications.

Primary Construction Industry Secondary Construction Industry Natural Stone Processing

Stone restoration, building construction, underground construction

Landscape Construction Stone processing industry

Facade Engineering Tile laying / Tiling Kitchen countertop construction

Paving Chimney / furnace construction Stone Masonry

Building renovation Monument preservation

Modernization Buildling / sculpture renovation

New construction Facility Management

Pre-cast concrete constructionClean-up work during maintenance and repairs

Defect repairs

Concrete cosmetics

Work on general building materials

Example Uses• Slabs, tiles and floor materials• Terrace and balcony slabs• Natural stone countertops• Sinks/Vanities • Fireplace covers • Veneers• Window sills and shelves• Stairs and steps• Natural stone sinks, basins and vanities• Counter tops in furniture manufacturing and installation• Swimming pool and well construction


KGS DIAMOND has been a world leading producer of resin and flexible diamond abrasives for over 60 years. The company’s top priority is the constant de-velopment and patenting of innovative abrasive tech-nology. The understanding of many complex proces-ses, such as the metalization of fabrics, electroplating, sintering, as well as resin and metal technologies, al-lows technological synergy that leads to the success-ful development of extremely unique products.

KGS DIAMOND has brought several innovative grin-ding and polishing solutions to the market, such as the KGS Swiflex®, which was the first flexible diamond abrasive tool for dry grinding and polishing, or the KGS Speedline® polishing discs. KGS DIAMOND has set new standards in the field of flexible diamond ab-rasives.

One example of an electroplated diamond tool is the KGS Swiflex® Cobra 2.0 Diamond Cutting and Grinding Disc – which is extremely efficient, elec-troplated on both sides, and has an M14 flange. The Cobra stands out from the competition in its versati-lity and high-performance working on a broad range of building materials.

The Cobra is the perfect tool for:

• Cutting, grinding and removing tile during renovation

• Removing tile adhesive• Smooth grinding and deburring of exposed con-

crete or pre-cast concrete for concrete cosmetics• Cutting old pipes from screed• Grooving in walls and floors• Working on building materials such as granite,

marble and engineered stone

The KGS Swiflex® Cobra 2.0 grinds quickly and effi-ciently and ensures a smooth, high-quality finished surface. Another advantage of this tool is the ability to cut materials all the way up to their edges. The M14 flange allows assembly to the angle grinder without the use of tools — saving time and eliminating extra steps. High efficiency and the ability to process a wide range of materials makes the KGS Swiflex® Cobra 2.0 a universally versatile tool that can handle anything.

Innovation

KGS Swiflex® Cobra 2.0

Grooving in concrete

Cutting tiles and grinding tile adhesive

Grinding marble


Innovation

Another example of flexible diamond innova-tion is the KGS Hybrid® Diamond Flap Disc, which is suitable for both wet and dry grinding. This tool is also great for grinding surfaces, debur-ring, chamfering and grinding edges and curves of granite, marble, concrete, composite materials, engineered stone, porcelain, terrazzo, glass, tile, and more — compared to cup wheels, this tool permits a smoother, more even grind because of the speed and high rate of material removal.

An example of KGS innovation in resin bon-ded diamond polishing discs is the new KGS Swiflex® XX Diamond Polishing Disc, which is suitable for the dry grinding of hard and soft stone, ceramic, engineered stone, and concrete. This is a premium KGS product that distinguishes itself in its performance, superior quality, and high efficiency.

KGS Hybrid® Diamond Flap Disc

KGS Swiflex® XX Diamond Polishing Discs

Marble Polishing

Grinding / Chamfering


Metal and Resin Bonded Diamond Grinding and Polishing Discs

Resin Bonded KGS Diamond Tools• Specially developed for fine grinding and polishing • Grits 50-10,000

Manufacturing Process• Solid resin coating• The diamond is distributed throughout the coating• As the tool begins working, the abrasive grits will be exposed, allowing optimal

tool performance. • As the old diamonds are worn down, the new diamonds are exposed

Metal Bonded KGS Diamond Tools• Especially suitable for rough and medium grinding • Promote fast cycle times and high material removal rates• Grits 60-400

The manufacturing process starts with the metalized fabric:• The working pattern is traced on metalized fabric• The metalized fabric is then processed through nickel and diamond electro plating

Bonds KGS Diamond Tools are available in metal or resin bonded technology.

Color Code SystemAll grit sizes have a color code and are available in:

Color Mesh Fepa Micron

Grey 50 P60 301

Green 60 P80 250 Rough

Black 120 P120 125

Red 200 P220 74

Yellow 400 P400 40 Medium

Yellow / White 500 P500 28

White 800 P600 20

Blue 1500 P2500 9 Fine

Orange 3000 P3000 5,5

Brown 6500-10000 P6500-10,000 2

Product Specifications and Construction


Dry and Wet Grinding in Stone Processing

Advantages DisadvantagesThe grinding results are immediately visible High heat load for the tools and materials

Controlled grinding Shorter service life

Better performance stability

DryDry Grinding

Dry and Wet Grinding Wet/Dry

WetWet Grinding

AdvantageUniversally applicable for dry and wet grinding

Advantages DisadvantagesProduces lustrous surface Work area should be protected from potential water damage

Excellent polishing results

Long service life

No heat generation


Grits and Appearances of Surfaces

Grit Size Description Application Surface Appearance

≤ 50 Large grit size Heavy grindingDistinct grinding and sawing streaks, stone color and texture almost unrecognizable

60 Large grit size GrindingSignificant abrasive streaks, color and texture barely recognizable

120 Medium grit size SmoothingVisible abrasive streaks, pale colors, texture recognizable, abrasive traces visible in streaks

200 Fine grit size Smoothing Colors and textures recognizable, abrasive streaks can be visible

400 Polishing grit size Semi-polishSemi-gloss, color very recognizable, abrasive streaks may still be visible

800 Polishing grit size Dependent on materialRecognizable polish, abrasive streaks barely visible

1500 Polishing grit size Dependent on materialPolish, no abrasive streaks, less glossy than the 3000 grit

3000 Polishing grit size Dependent on material Polish, less glossy than the 10,000 grit

10,000 Polishing grit size Dependent on material Polish with deep luster


KGS Product Quality Grades for Construction Materials

Natural stone, ceramic, engineered stone, and concrete surfaces can be ground and polished with heavy machines, light equipment, or hand-tools. Ground and polished surfaces have the advantage that, if needed, they can also be re-ground and re-polished to repair any defects. The appearance of the surfaces does depend on the material and condition, but most importantly on how the surface is processed.

Example Uses • Chamfering and edging• Surface grinding• Grinding and polishing of hard-to-reach places and corners• Hand grinding, deburring, defect removal, spot grinding, and sharpening of hard metals or cutting tools

KGS Diamond offers a complete range of products designed to handle a broad variety of grinding and polis-hing projects. You can find further information and tool recommendations in the KGS Tool-Matrix.

KGS Gold Line and Silver LineWe offer two different product lines for each application, which are categorized based on the exact needs of the customer.

The Gold Line meets the highest quality expectations through innovation and features. These products feature special performance parameters such as extraordinary cutting speed, the longest service life, and high efficiency.

The Silver Line products are high-quality and high-performance diamond tools. They guarantee reliability, quick processing, significant cutting speed, resistance to wear, and a long service life.

GOLD LINE

SILVER LINE


Product Performance Graphs

Service Life

Service life

Service life

Flexis®

Delta

Flexis® Delta

Flexis®

Swiflex®

XX

Telum®

Perf

orm

ance

Perf

orm

ance

Perf

orm

ance

Fine Grinding/Polish Performance - Dry

Fine Grinding/Polish Performance - Wet

Polish Performance – Hand Grinding – Dry and Wet

Speedline® CM

Hybrid®

Flap Disc

Hybrid®

Flap Disc

Swiflex® CX

Swiflex® CX

Hybrid® T Lamellen

Hybrid® T Flap Disc Hybrid®

PRO

Hybrid® PRO

Technical Tip:The above graphics show the relative position of each tool with reference to its performance and service life.

There can be variations depending on the type of work, use, and material.


Materials and Areas of Application

Common types of stone material are grouped together and listed in the KGS Tool-Matrix.

• Hard Stone

• Soft Stone

• Ceramic

• Engineered Stone

• Concrete

The recommended tools and quality levels are listed in the chronological order that the grinding and polishing should be done. The tools are also listed in the order of use for hand-tool and power-tool grinding.

Natural stones can be grouped into two categories, namely hard and soft natural stones. You must consider the type of natural stone and the tools and equipment available for completing any grinding or polishing job. Different methods can be required, depending on the natural stone material as well as the available tools and equipment. In a practical sense, this means that hard stone cannot be scratched or cut with simple, at-home tools such as kitchen knives.

Hard Stone: e.g. Granite, basalt, gneiss, porphyry, quartzite

Because of their hardness and acid resistant qualities, these stones are especially suitable for kitchen counter-tops, bathroom construction, showers, floor tiles, stairs, window sills, tables, solid basins, walls, or fireplace covers. Other possible uses include pavement and bricklaying, materials used for outdoor walkways and stairs, bricks, stone furniture and decorations, fountains, and facades and veneers for exterior wall claddings.

Soft Stone: e.g. Marble, limestone and dolomite, travertine and onyx marble, alabaster, serpentinite, slate, and sandstone If the stone is more than 90% quartz in its mineral make-up, it is considered a sandstone. These stones are modified using sandstone tools.

Soft stones, such as marble (a popular choice for bathroom material), limestone, slate, and travertine are used indoors as floor tiles and window sills, or in outdoor areas as tiles because of their strong material proper-ties and high-quality appearance. Slate is used often for wall cladding, floor tile, and even tables. Most onyxes are translucent and can add an innovative design element to a space. For example, they can be used as backlighting in bars, kitchens, bathrooms, or wall cladding. One thing to note about soft stone, however, is that it is not scratch or acid resistant. KGS Diamond offers a complete special catalogue of diamond tools and materials that are perfect for working with marble.

Large and Small Ceramic TilesIn construction, a distinction is made between earthenware (for wall tiles in a bathroom area) and stone-ware (for areas exposed to higher stress/use), and fine stoneware (break, chemical, and wear resistant), and cotto (for wall and floor tiling), cement tiles, and clinker tiles. Porcelain ceramics are also new on the market from brands such as Dekton®, NEOLITH® or selatec®. In the past few years, the trend has been to use extremely large (up to 3,20m x 1,60m) but thin plates. We will help you find the perfect diamond tool for even the most demanding projects, be it diamond cutting discs from the KGS RED™ Program or simply KGS Diamond Grinding and Polishing discs.

H

H

S

S

E

C

CER

CER


Construction Materials

Engineered StoneEngineered stone refers to a group of non-natural construction materials.Engineered stone (also polyresin, marbleite, poly-nature, polystone, and alabastrite sandstone) are mineral stones that are mixed with cement, building lime, or resin bonded materials and the addition of sand and broken rock. Agglo-marble and quartz material are engineered stones that are bonded by resin instead of cement.

Engineered stones are used for window sills, stairs, flooring, wall tiling, baseboards, and more. Quartz ma-terials are suitable for kitchen countertops, kitchen and bathroom tiles/panels, bathroom countertops, and other kitchen fixtures. Engineered stone can be worked on similarly to natural stone, but engineered stone has a higher resistance to environmental influence and technical strain. It also has better technical properties and offers a wider selection of color and design. This is also true for floorings such as old-fashioned cement tiles and terrazzo. Quartz material and engineered stone products from brands such as Silestone®, CaesarStone®, Stone Italia-na, the hard surface Avonite® or the increasingly popular engineered stone concrete for stairs, flooring, and window sills are high-tech materials that can be used indoors and can be professionally modified using diamond tools— KGS DIAMOND offers optimal economically-efficient process solutions for these projects.

ConcreteConcrete is not just a cement construction material. Today, it is an architectural term that is starting trends in several different fields. The idea of exposed concrete goes hand-in-hand with the grinding and polishing of concrete. Exposed concrete is not plastered or veneered, and the exposure usually serves an aesthetic purpose. This type of concrete is found both indoors and outdoors, on floors, ceilings, walls, facades, or as concrete slabs. KGS DIAMOND offers a wide range of flexible diamond tool products and abrasives for concrete cosmetics, concrete removal, concrete restoration, removal of structural defects, and for work on exposed concrete surfaces. KGS Diamond tools can be used for removing only the top layer of cement, or for removing the aggregate in its largest diameter. The grinding cycles create a shiny, reflective surface.

Source information: https://de.wikipedia.org/wiki/ Hart-_und_Weichgesteinhttp://www.baunetzwissen.de/standardartikel/Fliesen-und-Platten-Keramische-Fliesen-und-Platten-Einteilung_1584603.html

E

C


Description of Common KGS Grinding Patterns and Geometries

KGS Speedline® CMResin bonded, multilayered diamond abrasive, sets a new standard in price and performance for wet grinding

KGS Telum® Metal and resin bonded, innovative KGS design

GOLD LINE

KGS Hybrid® PROResin bonded, multilayered diamond abrasive

GOLD LINE

KGS Quadroflex™ Metal bonded, diamond abrasive, open abrasive pattern, for Hybrid® Diamond Flap Discs

GOLD LINE

KGS Swiflex® CXResin bonded, single layered diamond abrasive, best price to performance ratio, alternative for SIC sanding paper

SILVER LINE

KGS Swiflex® XXResin bonded, multilayered diamond abrasive, top performance, sets a new standard in dry grinding

GOLD LINE

KGS Semi-flexible Grinding Discs Semi-flexible grinding discs with SIC / silicon carbide grit, (not a diamond product) multiple abrasive layers

SILVER LINE

SILVER LINE

KGS Flexis® Metal and resin bonded diamond abrasive, industrial dot-pattern surface

SILVER LINE

New Innovation

New Innovation

New Innovation

Dry

Wet

Wet

/ D

ry


KGS Quick Product Finder – Tool-Matrix – KGS Abrasives

Find your product in 4 steps: 1. Material, 2. Type of Process, 3. Application/Use, 4. Quality

Material Type of Process

Hard stone

Granite, basalt, gneiss,

porphyry quartzite

Soft- stone

Marble

Soft- stone

Limestone

Soft- stone

Sandstone (dependent on degree

of hardness)

Ceramic

Fine stoneware, stoneware,

earthenware, cotto, clinker

Engineered Stone

Quartz material, agglo,

concrete blocks, terrazzo,

mineral materials

Concrete

Concrete/ General building materials

Focus of the process

Grind: Coarse,

Medium, Fine, Polish

Chamfer-ing

Edge Grinding

Surface Grinding

Hard-to-reach-

areas and corners

Manual processing, deburring,

defect removal,

sharpening

++ ++ ++ ++ ++ ++ Grinding, Stock Removal

Rough + ++

+ + + + + + Grinding, Stock Removal

Rough + +

++ ++ ++ ++ ++ ++ Grinding, Stock Removal

Rough, Medium ++ ++

++ ++ ++ ++ ++ ++ ++ Grinding, Polishing

Rough, Medium, Fine,

Polish+ ++ ++

++ + + ++ + + + Grinding, Polishing


Polish+ + ++

+ + + ++ + ++ + Grinding, Polishing


Polish++ ++ +


Rough, Medium, Fine ++ ++ +

+ + + + ++ + + Grinding, Polishing

Rough, Medium, Fine ++ + +



Polish++



Polish+ + ++



Polish++ ++ + ++ ++



Polish++ ++ + ++ ++

n.v. n.v. n.v. n.v. n.v. n.v. n.v.Grinding, Polishing

- ++

+ ++ ++ + + + + Cutting, Grinding

- + + + +

++ ++ ++ Cutting -

+ + + Cutting -

++ + + + + Cutting -

++ ++ ++ ++ + + + Cutting -

++ + + ++ Cutting -

++ + + + ++ ++ Cutting -

Material Categories

= Hard Stone

= Soft Stone

= Ceramic

= Engineered Stone

= Concrete

1 2

General recommended use: ++ = very good, + = good

H

S

E

C

CER


In the product column, you will find the new KGS DIAMOND 2017 products bold-marked. This includes both Gold Line Innovation and Silver Line, always at the best price to performance ratio. 2) Find KGS tools and product recommendations in the Tool-Matrix. Finished results are influenced by many factors that should always be considered, e.g. the degree of hardness of the materials to be used, the cutting width of the diamond cutting discs, the working pressure on the back-up pad and disc, and the cycle/peripheral speeds of the hand machines. 3) You can find more diamond cutting and grinding discs in the KGS RED™ Program catalogue.

Application Product and Specification

Qu

ality

Page

Application / Use

DRY = Dry GrindingWET = Wet Grinding

Product Description

Product TypeO = Grindingl = Velcro discu = Delta discq = Handpad | = Cutting disc−− = Cup Wheel

GritSelection

Adaptor:

Direct = Direct with clamping nut/lock nut

Hand = Manual grinding Velcro = Velcro Adaptor

AF = Back-up Pads

RED™ K898 Diamond Cup Wheel −− Direct Gold 29

RED™ K878 Diamond Cup Wheel −− Direct Silver 30

Semi-flexible Grinding Disc SIC (silicon carbide) O 16-120 AF Silver 33

Swiflex® XX Diamond Polishing Disc l 60-3000 Velcro Gold 37

Hybrid® PRO Diamond Polishing Disc l 60-10000 Velcro Gold 38

Swiflex® CX Diamond Polishing Disc l 60-3000 Velcro Silver 39

Hybrid® Diamond Flap Disc O 60-200 Direct Gold 31

Hybrid® T Diamond Flap Disc O 60-400 Direct Silver 32

Flexis® Delta Diamond Polishing Disc u 60-3000 Velcro Silver 40

Angle Grinder WET Speedline® CM Diamond Polishing Disc l 60-3000 Velcro Silver 41

Telum® Diamond Handpad q 60-3000 Hand Gold 43

Flexis® Diamond Handpad q 60-3000 Hand Silver 44

Flexis® Diamond Whetstone q 120-800 Hand Silver 45

KGS Swiflex® Cobra, Diamond Cutting/Grinding Disc M14, double sided, electroplated (cutting and grinding with one tool)

| and O Direct Gold 21

RED™ K936 Diamond Cutting Disc, electroplated | Direct Gold 22

RED™ K935 Diamond Cutting Disc, electroplated | Direct Silver 23

RED™ K810 Diamond Cutting Disc, sintered | Direct Gold 24

RED™ K818/K819 Diamond Cutting Disc, sintered | Direct Silver 25



43

KGS Quick Product Finder – Tool-Matrix – KGS Abrasives

Angle Grinders

Cutting / Grinding

DRY

Angle Grinders

DRY & WET

Angle Grinders

DRY

Hand Grinding

DRY & WET


CUTTING

KGS Diamond cutting discs can be used for cutting hard stone, soft stone, ceramic, engineered stone, concrete, and other general building materials.KGS DIAMOND offers you high-grade diamond cutting discs with premium cutting performance and top tool quality. The products with „Swiss Diamond Technology“ prove to be top-picks because of their maximum service life and consistently excellent results. In this catalogue, you will find a selection of diamond cutting discs for building, construction, and natural stone work. You can find larger sized diamond cutting discs in the separate KGS RED™ Diamond Cutting Discs catalogue. Please contact us: We manufacture diamond cutting discs with Swiss precision for CNC machines and bridge saws.


KGS Swiflex® Cobra 2.0 Cutting/Grinding DiscModel KGS Swiflex® Cobra 2.0

Bond Electroplated diamond on both sides

Diameter Ø 115, 125, 178 und 230 mm

Max. rpm 80 m/s

Adaptor M14

Segment Height 3 mm for Ø 115 and 125 mm4 mm for Ø 178 and 230 mm

Segment Width 2,5 mm for Ø 115 and 125 mm2,75 mm for Ø 178 and 230 mm

ANGLE GRINDER – CUTTING / GRINDING

KGS Swiflex® Cobra 2.0 Ø115 mm Ø125 mm Ø178 mm Ø230 mm

Electroplated on both sides 3023.20780 3023.20781 3023.20782 3023.20783

1 unit per box, price per unit

Description / CharacteristicsKGS Swiflex® Cobra Cutting and Grinding Discs are diamond electroplated. KGS Swiflex® Cobra Cutting and Grinding Discs feature an extremely unique KGS design. The products from the GOLD LINE are electroplated on both sides and offer premium quality for cutting and grinding.

Application / UseAngle Grinder, Dry Cutting / Dry GrindingKGS Swiflex® Cobra is suitable for cutting and grinding natural stone, ceramic, engineered stone, and con-crete.

Type of ProcessCuts and grinds on both sides at the same time. Very suitable for chamfering, edging, surface grinding, deburring, grinding of flat surfaces, cutting of joints, grinding and removal of coatings, and modification of general building material.

Advantages• Very quick cutting and grinding in one step, without having to change the disc• The M14 flange version offers disc stability and more precise cutting and grinding• Saw cuts provide a roughness that corresponds approximately to a 60 grit• Very fine cut with a smooth, high-quality finish• Robust tool construction leads to high product quality and the best performance• Universally versatile, can handle anything

DryGOLD LINE

H S E CCER


KGS RED™ K936 Diamond Cutting DiscModel KGS RED™ K936

Bond Diamond electroplated

Diameter Ø 115, 125, 180 and 230 mm

Max. rpm 80 m/s

Adaptor 22,23 mm



RED™ Diamond Cutting Disc Ø115 mm Ø125 mm Ø180 mm Ø230 mm

K936 3102.20234 3102.20235 3102.20236 3102.20237


Description / CharacteristicsThe KGS RED™ K936 Diamond Cutting Disc is diamond electroplated. The RED™ K936 is a product from the GOLD LINE with premium quality and has a special „segment design“ with laterally and inwardly placed pro-tective segments.

Application / UseAngle Grinder Dry CuttingThe KGS RED™ K936 is used for cutting soft stone.

Type of ProcessExcellent for cutting soft stone such as marble, limestone, and sandstone.

Advantages• Very quick and exact cutting • Electroplated segments with lateral protection segements for optimal free cutting without breakage of material • Comfortable, safe, and simple cutting• Long service life and high performance guarantees highest economic efficiency

ANGLE GRINDER – CUTTING

DryGOLD LINE

H S E CCER



Bond Diamond electroplated


Max. rpm 80 m/s

Adaptor 22,23 mm



RED™ Diamond Cutting Disc Ø115 mm Ø125 mm Ø180 mm Ø230 mm

K935 3102.20230 3102.20231 3102.20232 3102.20233


Description / CharacteristicsThe KGS RED™ K935 Diamond Cutting Disc is diamond electroplated. The SILVER LINE quality RED™ K935 Diamond Cutting Disc features a special „electroplated diamond segment design.“

Application / UseAngle Grinder Dry CuttingThe KGS RED™ K935 is used for cutting soft stone.

Type of ProcessExcellent for cutting soft stones such as marble, limestone, and sandstone.

Advantages• Quick and exact cutting • Comfortable and safe cutting • Easy to handle and long service life


DrySILVER LINE

H S E CCER



Bond Metal Bond Sintered


Max. rpm 80 m/s

Arbor / Adaptor 22,23 Arbor or M14 Flange

Segment Height 7 mm for Ø 115, 125 and 150 mm8 mm for Ø 230 mm

Segment Width 2,2 mm for Ø 115, 125 and 150 mm2,8 mm for Ø 230 mm


KGS RED™ K810 Ø115 mm Ø125 mm Ø150 mm Ø230 mm

Arbor 22,23 mm 8102.10050 8102.10051 8102.10052 8102.1005

M14 Flange 8102.10150 8102.10151 - 8102.10154


Description / CharacteristicsMetal bond sintered, continuous rim with turboprofile, corrugated steel core with cooling holes and deep lateral protection segments.

Application / UseAngle Grinder Dry CuttingThe KGS RED™ K810 Diamond Cutting Discs are for the dry cutting of hard stone, soft stone, and concrete. Especially suitable for granite, marble, limestone, sandstone, and general building materials such as paving slabs, composite stone, bricks and paving stones, clay and concrete bricks, brushed concrete, reinforced con-crete, clay/stoneware pipes and hard clinker brick.

Type of ProcessCutting

Advantages• Turboprofile permits a quick and clean cut• Lateral protection segments permit a better free cut and less blade wear• Robust construction with a corrugated steel core for smooth, exact, and stable cutting• The M14 flange provides disc stability and flush cutting• Universally versatile diamond cutting disc for construction

DryGOLD LINE

H S CECER


KGS RED™ K818/K819 Diamond Cutting DiscModel KGS RED™ K818 / K819


Diameter Ø 115 and 125 mm

Max. rpm 80 m/s

Arbor 22,23 mm

Segment Height 7 mm

Segment Width 1,4 mm


KGS RED™ K818 / K819 Ø115 mm Ø125 mm

K818 with cooling holes 8102.10080 8102.10081

K819 without cooling holes - 8102.10201


Description / CharacteristicsMetal bond sintered, continuous rim with turboprofile, reinforced steel in the flange area, steel core with cooling holes in K818 model, without cooling holes in the K819 model.

Application / UseAngle Grinder, Dry CuttingThe KGS RED™ K818, K819 Diamond Cutting Discs are for dry cutting of hard stone, soft stone, ceramic, engi-neered stone, and concrete. Especially suitable for granite, marble, limestone, sandstone, and general building materials such as paving slabs, composite, brick and paving stones, clay and concrete bricks, brushed concrete, reinforced concrete, stoneware, hard brick and slate. Ceramic: e.g. Fine stoneware tiles, stoneware, earthenware, cotto, and clinkerEngineered Stone: e.g. Quartz materials, agglo, concrete stone, terrazzo and solid surface material


Advantages• Turboprofile permits quick and clean cutting• Good for thin and precise cuts • Reinforced steel blade in the flange area permits even and stable cutting• Universal diamond cutting disc, especially suitable for dense materials such as ceramic, engineered stone,

and granite

DrySILVER LINE

H S E CCER




Diameter Ø 115, 125 and 230 mm

Max. rpm 80 m/s

Arbor 22,23 mm

Segment Height 10 mm for Ø 115 and 125 mm12 mm for Ø 230 mm

Segment Width 2,5 mm for Ø 115 and 125 mm2,8 mm for Ø 230 mm


KGS RED™ K822 Ø115 mm Ø125 mm Ø230 mm

8102.10060 8102.10061 8102.10064


Description / CharacteristicsMetal bond sintered, segmented cutting edge

Application / UseAngle Grinder, Dry CuttingKGS RED™ K822 Diamond Cutting Disc for the dry cutting of hard stone, soft stone, engineered stone, and concrete, especially suitable for general building materials such as paving slabs, composite, brick and paving stones, clay and concrete bricks, brushed concrete, reinforced concrete, and clay/stoneware pipes.


Advantages• Segmented cutting edge for quick and clean cutting• 10 mm height for professional applications with long service life and excellent cutting• Universal diamond cutting discs for concrete and general building materials

H S E CCER

DryGOLD LINE





Max. rpm 80 m/s

Arbor / Adaptor 22,23 mm Arbor or M14 Flange

Segment Height 10 mm

Segment Width 1,4 mm


KGS RED™ K835 Ø115 mm Ø125 mm

Arbor 22,23 8102.10090 8102.10091

M14 Adaptor 8102.10190 -


Description / CharacteristicsMetal bond sintered, continuous rim with turboprofile, steel core with cooling holes, reinforced steel blade in flange area.

Application / UseAngle Grinder Dry CuttingThe KGS RED™ K835 Diamond Cutting Disc is for the dry cutting of hard stone, soft stone, ceramic, and en-gineered stone. Optimal for dense, hard ceramic materials such as fine stoneware, and engineered stones like Dekton, Lapitec, etc.

Type of ProcessCutting, professional use

Advantages• Premium turboprofile with special segment design for a quick, effortless, and deep cut• 10 mm height, very long service life• Reinforced flange permits quiet, low-vibration and excellent cutting results• For very precise and very thin cuts• Reinforced steel blade with M14 flange for disc stability and flush cutting• Break-out-free cutting, very smooth edges

H S E

DryGOLD LINE

CER C


GRINDING

After cutting, the next step is grinding. Diamond grits from 30 to 400 are recommended for material removal including grinding, medium grinding, and fine grinding. A good finish and optimal polish is only possible when all the scratches from the grinding or sawing processes are removed! In addition to the typical cup wheels for material removal and rough grinding, we offer the KGS Semi-flexible Grinding Discs, which can be used for heavy material removal without generating excessive heat. Try out the innovative KGS Hybrid® Diamond Flap Discs! They offer a smooth and even grind, protection for the operator, and significantly reduced hand and arm vibrations compared to the cup wheels. They are universal, easy to use, and provide the best results for optimal and efficient operation.


KGS RED™ K898 Diamond Cup WheelModel KGS RED™ K898

Bond Brazed, Sintered Metal Bond


Max. rpm 80 m/sØ 100 mm: max. 15.300 r/minØ 115 mm: max. 13.300 r/minØ 125 mm: max. 12.250 r/minØ 180 mm: max. 8.500 r/min

Arbor / Adaptor 22,23 Arbor or M14 Flange

Segment Height 4 mm

Segment Width 8 mm

Total Height 19 mm for 22,23 Arbor31 mm for M14 Adaptor

ANGLE GRINDER – GRINDING

KGS RED™ K898 Ø100 mm Ø115 mm Ø125 mm Ø180 mm

Arbor 22,23 mm - - 8102.20001 -

M14 Adaptor 8102.20020 8102.20021 8102.20022 8102.20024


Description / CharacteristicsDiamond cup wheel, brazed, with double row segment arrangement, with bore 22.23 mm or with M14 adaptor, with suction holes, suitable for commercial angle grinders and concrete grinders. Grinding surface profile corresponds to a grit size of approximately ≤ 50.

Application / UseAngle Grinder Dry GrindingThe KGS RED™ K898 Cup Wheel is for the dry grinding of concrete, hard stones such as granite, and soft stones such as marble and sandstone. Can be used for engineered stone, screed, masonry, plaster, adhesives and coatings, and general building and abrasive materials

Type of ProcessMaterial removal, grinding of surfaces, edges and corners, abrading uneven surfaces and top layers of surfac-es. For professional, demanding work with an extremely high material removal rate.

Advantages• Two rows of segments with suction holes for professional use, long service life, and very good grinding

performance• Very fast, cool, and clean grind• High grinding and material removal speed• M14 Adaptor permits quick tool change

H S E

DryGOLD LINE

CER C


KGS RED™ K878 Diamond Cup WheelModel KGS RED™ K878

Bond Sintered Metal Bond

Diameter Ø 100 mm

Max. rpm 80 m/sØ 100 mm: max. 15.300 r/min

Adaptor M14 Flange

Segment Height 2 mm

Segment Width 7 mm

Total Height 27 mm

ANGLE GRINDER – GRINDING

KGS RED™ K878 Ø100 mm

8102.20010


Description / CharacteristicsDiamond cup wheels, produced by high-frequency welding, with single-row turboprofile segment arrang-ment, with M14 adaptor, suitable for commercial angle grinders and concrete grinders. The grinding pattern/finish corresponds to a grit size of approximately ≤ 50.

Application / UseAngle Grinder Dry GrindingThe KGS RED™ K878 Diamond Cup Wheel is for the dry grinding of concrete, hard stone (e.g. granite), soft stone (e.g. marble, sandstone), and for use on engineered stone, screed, masonry, plaster, general building materials, abrasive materials, and removal of adhesive.

Type of ProcessMaterial removal, grinding of surfaces, edges and corners, abrading uneven surfaces and top layers of surfac-es, for low material removal rates, or light to medium-heavy applications.

Advantages• The turboprofile segment pattern permits a long service life and good grinding performance• Offers universal use and a quick, clean cut• With M14 adaptor for quick tool change

H S ECER C

DrySILVER LINE


KGS Hybrid® Diamond Flap DiscModel KGS Hybrid®

Bond Metal bonded diamond

Body Material Plastic

Grit 60, 120, 200

Diameter Ø 115 mm

Arbor / Adaptor 22,23 mm Arbor or M14 Flange

Recommended rpm 2000 - 4500 r/min

Max. rpm 63 m/s

Technical Tip To enhance wet and dry performance, use a variable speed handheld machine.

Description / CharacteristicsThe KGS Hybrid® Diamond Flap Discs are made of a plastic body with metal bonded diamond flaps.

Application / UseAngle Grinder Dry and Wet GrindingGrinding of natural stone, ceramic, engineered stone, concrete, composites, glass, and many more.

Type of ProcessThe focus is on material removal and deburring, from grinding to fine grinding. Very suitable for edge grinding and chamfering. Also well suited for surface grinding.

Advantages• Aggressive and very quick material removal • Very long service life• Firm body and solid flaps give precise control• Clean finish with accurate chamfering and edging• Comfortable and smooth grinding, reduced hand and arm vibrations compared to cup wheels• Easy to use due to constant grinding pressure

H S E CANGLE GRINDER – GRINDING

KGS Hybrid® GN-60 BK-120 RD-200

Ø115 mm / M14 Adaptor 4024.00102 4024.00103 4024.00104

Ø115 mm / Arbor 22,23 4024.00001 4024.00006 4024.00007


Wet/DryGOLD LINE

CER


KGS Hybrid® T Diamond Flap DiscModel KGS Hybrid® T

BondMetal bonded diamond with silicon carbide cloth flaps

Body Material Plastic

Grit 60, 120, 200, 400

Diameter Ø 115 mm

Arbor 22,23 mm


Max. rpm 63 m/s


Description / CharacteristicsKGS Hybrid® T Diamond Flap Discs are made of a plastic body with metal bonded diamond flaps combined with silicon carbide flaps.

Application / UseAngle Grinder Wet and Dry GrindingGrinding of natural stone, ceramic, engineered stone, concrete, composites, glass, and many more.

Type of ProcessThe focus is on material removal and deburring, from rough grinding to fine grinding. Very well suited for chamfering, also suitable for edge and surface grinding. The Hybrid® T grinds softer than the Hybrid®.

Advantages• Faster material removal• Long service life• Soft feel, clean finish with accurate chamfering and edging• Comfortable and smooth grinding, reduced hand and arm vibrations compared to cup wheels• Easy to use due to constant grinding pressure

H S E CANGLE GRINDER – GRINDING

KGS Hybrid® T GN-60 BK-120 RD-200 YE-400

Ø115 mm 4024.00008 4024.00009 4024.00010 4024.00012


Wet/DrySILVER LINE

CER


KGS Semi-flexible Grinding Disc SICModel KGS Semi-flexible

Bond Resin bonded silicon carbide

Body Material Red fiber base

Grit 16, 24, 36, 60 and 80

Diameter Ø 115, 125 and 178 mm

Arbor 22,23 mm

Max. rpm 80 m/s

Adaptor Use back-up pad

KGS Semi-flexible (per 1 unit) 16 24 36 60 80

Ø115, flat, without cooling holes 4211.01463 4211.01464 4211.01465 4211.01466 4211.01467


Ø178, angled, with 12 cooling holes

4211.01446 4211.01447 4211.01448 4211.01449 4211.01450


KGS Semi-flexible (per 5 units) 16 24 36 60 80



Ø178, angled, with 12 cooling holes

4211.01456 4211.01457 4211.01458 4211.01459 4211.01460

5 units per box, price per unit, packing unit 5x5 units, blister packed = 25 units per box

Description / CharacteristicsSilicon carbide semi-flexible grinding discs consist of a special heavy red fiber backing with several layers of silicon carbide (SIC) abrasive grits embedded in a resin bond.

Application / UseAngle Grinder Dry GrindingFor work on natural stone, engineered stone, concrete, precast concrete, general building materials, composites, and many more. Semi-flexible grinding discs may only be used with a back-up pad. Both harder plastic back-up pads (less flexible, harder grind) and softer rubber back-up pads (more flexible, softer grind) are available to choose from.

Type of ProcessThe focus is on material removal, grinding, and deburring, from rough grinding to medium grinding.Very well suited to edge and surface grinding.

Advantages• Faster material removal • Long service life due to multiple abrasive layers• The abrasive pattern of the disc permits a "cooler" grind• Semi-flexible grinding with a back-up pad allows selective and controlled grinding• Because of the grinding process, the grinding disc becomes more flexible.• Semi-flexible grinding discs create less grinding vibration in comparison to grinding wheels.

H S E C

DrySILVER LINE

CERANGLE GRINDER – GRINDING


KGS Swiflex® Diamond Sculpting ToolsModel KGS Swiflex®

Dimensions Ø8-Ø40 mm x 6-20 mm

Shank Diameter 6 mm

Recommended rpm 20.000 – 25.000 r/min

Description / CharacteristicsKGS Swiflex® Diamond Sculpting Tools, high-temperature vacuum brazed, standard 6 mm diameter shaft connection.

Application / UseGrinding Dry and Wet Grinding, stone sculpting, fine work and sculptural design on natural and engineered stone. Restoration and work on historical buildings, sculptures, and stone monuments. For use on handheld pneu-matic or electrical machines with flexible shafts.

Type of ProcessRecommended for soft stones such as marble, limestone, or sandstone, also well suited for work on engi-neered stone. The service life and cut may vary if used on hard stones such as granite.

Advantages• High temperature brazing• Fast and high material removal rate• High-strength brazing• Strong abrasive grain adhesion • Cooler grind due to larger spacing between abrasive grains• Holds grinding shape for long and professional use

H S EHANDHELD MACHINES

Wet/DryGOLD LINE

KGS Swiflex® Ø10x16x6 Ø8x6x6 Ø16x6x6 Ø20x10x6 Ø8x20x6 Ø18x20x6

Sculpting Tool No. 1 No. 2 No. 3 No. 4 No. 5 No. 6

3191.90001 3191.90002 3191.90003 3191.90004 3191.90005 3191.90006

Ø20x6x6 Ø12x20x6 Ø30x6x6 Ø25x4x6 Ø20x6x6 Ø40x6x6

Sculpting Tool No. 7 No. 8 No. 9 No. 10 No. 11 No. 12

3191.90007 3191.90008 3191.90009 3191.90010 3191.90011 3191.90012


CER C

No. 1 No. 2

No. 3 No. 4

No. 5 No. 6

No. 7 No. 8

No. 9 No. 10

No. 11 No. 12


POLISHING

The next step following cutting and grinding is polishing. Fine grinding and polish grinding create a silky matt surface with a 400 grit. Grits 800 and higher create a recognizable and genuine polish. The finer grits of 1500, 3000, and, if needed, the polishing grit of 10,000, create a deep glossy appearance. KGS DIAMOND offers you a wide range of products for wet and dry grinding, that are tailored to the requirements of the material, the type of process, and the application. We have brought a new generation of flexible diamond grinding discs to the market as well: The KGS Swiflex® XX sets a complete new standard for dry grinding: quick and aggressive - a simple process with the best results. The grinding results bring a high gloss finish without discoloring the materials. The KGS Swiflex® CX for dry and wet grinding, and the KGS Speedline® CM, exclusively for wet grinding, are further premium product solutions.


KGS Swiflex® XX Diamond Polishing DiscModel KGS Swiflex® XX

Bond Resin bonded diamond

Body Material Backing material with velcro connection

Grit 60, 120, 200, 400, 800, 1500, 3000

Diameter Ø 100 mm

Arbor 15 mm


Max. rpm 50 m/s

Adaptor Ø100 mm Velcro Adaptor


KGS Swiflex® XX GN-60 BK-120 RD-200 YE-400 WH-800 BL-1500 OR-3000

Ø100 / 15 mm 4023.00314 4023.00315 4023.00316 4023.00317 4023.00318 4023.00319 4023.00320

3 units per box, price per unit

Set includes 7 grits (60, 120, 200, 400, 800, 1500, 3000) = 1 pack

4023.00322

Description / CharacteristicsKGS Swiflex® XX Diamond Polishing Discs are made from resin bonded multilayered diamond. Swiflex® XX Products feature a unique KGS design.

Application / UseAngle Grinder Dry GrindingKGS Swiflex® XX are a new generation of flexible diamond grinding and polishing discs that set a new stand-ard in dry grinding. They can be used for work on natural stone, ceramic, engineered stone, and concrete.

Type of ProcessGrinding and polishing from rough grinding to fine polishing.Very well suited for edge and surface grinding, also well suited for chamfering.

Advantages• Very fast grinding and polishing • Very long service life• Quickly creates a high gloss finish without discoloring the materials• Even after polishing, the natural stone color stays the same, e.g. white marble stays really white• Versatile application

DryGOLD LINE

ANGLE GRINDER – POLISHING H S E CCER

New Innovation


KGS Hybrid® PRO Diamond Polishing DiscModel KGS Hybrid® PRO


Body Material Velcro connection

Grit 60, 120, 200, 400, 800, 1500, 3000, 10.000

Diameter Ø 100 mm

Arbor 15 mm

Recommended rpm 2500 – 4500 r/min

Max. rpm 40 m/s

Adaptor Ø100 mm Velcro back-up pad M14


KGS Hybrid® PRO GN-60 BK-120 RD-200 YE-400 WH-800 BL-1500 OR-3000

Ø100 / 15 mm 3023.30253 3023.30254 3023.30255 3023.30256 3023.30257 3023.30258 3023.30259

BR-10,000dark

BR-10,000 light

Ø100 / 15 mm 3023.30261 3023.30260


Description / CharacteristicsKGS Hybrid® PRO Diamond Polishing Discs are multilayer resin bonded diamond.

Application / UseAngle Grinder Dry and Wet GrindingGrinding of natural stone, ceramic, engineered stone, concrete, composites, and many more.

Type of ProcessThe focus is on grinding and polishing from rough grinding to fine polishing. Very suitable for edge and surface grinding. KGS offers a special light 10,000 grit for the finishing of light colored materials. In addition, KGS offers a dark 10,000 grit for the finishing of dark colored materials.

Advantages• Fast grinding and polishing• Long service life• Good edge and surface quality• Optimal finish with the 10,000 grit


Wet/DryGOLD LINE


KGS Swiflex® CX Diamond Polishing DiscModel KGS Swiflex® CX



Grit 60, 120, 200, 400, 800, 1500, 3000


Arbor 15 mm


Max. rpm 63 m/s

Adaptor Ø100 or 115 mm Velcro back-up pad M14


KGS Swiflex® CX GN-60 BK-120 RD-200 YE-400 WH-800 BL-1500 OR-3000

Ø100 / 15 mm 4023.00337 4023.00338 4023.00339 4023.00340 4023.00341 4023.00342 4023.00343

Ø115 / 15 mm 4023.00404 4023.00405 4023.00406 4023.00407 4023.00408 4023.00409 4023.00410


Set includes 7 grits (60, 120, 200, 400, 800, 1500, 3000) = 1 Pack

Ø100 / 15 mm: 4023.00336 Ø115 / 15 mm: 4023.00454

Description / CharacteristicsKGS Swiflex® CX Diamond Polishing Discs are resin bonded diamond discs.

Application / UseAngle Grinder Dry and Wet GrindingKGS Swiflex® CX are a new generation of flexible diamond polishing discs. They can be used on natural stone, ceramic, engineered stone, and concrete. Swiflex® CX Diamond Polishing Discs are a replacement for conventional silicon carbide sandpaper.

Type of ProcessGrinding and polishing from rough grinding to fine polishing.Very well suited for chamfering and edge grinding; also good for surface grinding.

Advantages• Fast grinding and polishing• Long service life compared to silicon carbide sandpaper• KGS Swiflex® CX delivers a fast high-gloss finish without discoloring the materials.• The finishes will not have the “orange peel” effect• Even after polishing, the natural stone color stays the same, e.g. white marble stays really white• More efficient grinding process compared to conventional silicon carbide sandpaper


Wet/DrySILVER LINE New Innovation


KGS Flexis® Delta Diamond Polishing PadsModel KGS Flexis®

BondMetal bonded diamond (≤ Grit 400)Resin bonded diamond (≥ Grit 500)


Grit 60, 120, 200, 400, 500, 1500, 3000

Dimensions80 mm for FEIN machines94 mm for Bosch machines

Abor 15 mm

Vibrations 10,000 – 19,500 1/min

Adaptor Use the standard Delta back-up pad

KGS Flexis® GN-60 BK-120 RD-200 YE-400 WH-500 BL-1500 OR-3000

80x80x80 mm (FEIN) 1042.0201311 1042.0201312 1042.0201313 1042.0201314 1042.0201325 1042.0201326 1042.0201327

94x94x94 mm (Bosch) 1042.0202111 1042.0202112 1042.0202113 1042.0202114 1042.0202125 1042.0202126 1042.0202127


Description / CharacteristicsKGS Flexis® Delta Diamond Polishing Triangle Shaped Pads are either metal or resin bonded, depending on their grit.

Application / UseDelta Grinder Dry and Wet GrindingKGS Flexis® Delta Diamond Polishing Pads can be used for natural stone, ceramic, engineered stone, and concrete. For use on standard Delta grinding machines.

Type of ProcessGrinding and polishing from rough grinding to fine polishing.Great for work in hard-to-reach corners and edges.

Advantages• Fast grinding and polishing • Long service life• Safely and easily grind and polish difficult shapes, such as corners, flats, and round edges.


Wet/DrySILVER LINE


KGS Speedline® CM Diamond Polishing DiscModel KGS Speedline® CM



Grit 60, 120, 200, 400, 500, 1500, 3000

Diameter Ø 100 mm

Arbor 12 mm


Max. rpm 40 m/s

Adaptor Ø100 mm Velcro back-up pad M14Use the corresponding wet angle grinder

KGS Speedline® CM GN-60 BK-120 RD-200 YE-400 WH-500 BL-1500 OR-3000

Ø100 / 12 mm 4023.00362 4023.00363 4023.00364 4023.00365 4023.00366 4023.00367 4023.00368


Set includes 7 grits (60, 120, 200, 400, 800, 1500, 3000) = 1 Pack

4023.00453

Description / CharacteristicsKGS Speedline® CM Diamond Polishing Discs are resin bonded diamond discs.

Application / UseAngle Grinder Wet GrindingKGS Speedline® CM are a new generation of flexible diamond polishing discs. They can be used on natural stone, ceramic, engineered stone, and concrete.

Type of ProcessGrinding and polishing from rough grinding to fine polishing. Very well suited for surface grinding; also good for chamfering and edge grinding.

Advantages• Fast grinding and polishing • Long service life• Delivers a quick high-gloss finish• Even after polishing, the natural stone color stays the same, e.g. white marble stays really white

ANGLE GRINDER – POLISHING

WetSILVER LINE New Innovation

H S E CCER


HAND GRINDING

Sometimes, machine use is not practical or possible. KGS DIAMOND offers a great selection of handpads as a solution. The abrasive surface of the handpad is bonded to a foam body for handheld use. The electroplated or resin bonded KGS Diamond Handpads, also known as grinding and polishing sponges, are most often used for chamfering and deburring. You can manually work on hard-to-reach surfaces, corners, and edges, wet or dry. The potential uses seem endless for work on natural and engineered stone, composites, glass, ceramic, or concrete surfaces, e.g. spot/selective grinding for concrete cosmetics. The KGS Telum® Diamond Handpad and the KGS Flexis® Diamond Handpad can handle just about anything, thanks to the „Swiss Diamond Technology“, the versatility and wide range of application, and easy handling.


KGS Telum® Diamond HandpadModel KGS Telum®


Body Material Industrial foam

Grit 60, 120, 200, 400, 500, 1500, 3000

Dimensions 90x55 mm

KGS Telum® GN-60 BK-120 RD-200 YE-400 WH-500 BL-1500 OR-3000

90 x 55 1041.0100011 1041.0100012 1041.0100013 1041.0100014 1041.0100025 1041.0100026 1041.0100027


Description / CharacteristicsKGS Telum® Diamond Handpads are made of a foam body with a diamond-coated grinding and polishing surface. Telum® Diamond Handpads feature a unique KGS design and are part of the Premium product solu-tions.

Application / UseHand Grinding Dry and Wet GrindingKGS Telum® Diamond Handpads can be used for natural stone, ceramic, engineered stone, concrete, compos-ites, glass, and many more.

Type of ProcessGrinding and polishing from rough grinding to fine polishing. Very well suited for hand grinding of hard-to-reach places, corners, edges, and for manual work, such as deburring, tool sharpening, and general defect removal. Wetting the grinding surface with a little bit of water improves the grinding process.

Advantages• KGS Telum® Design for a perfect finish• “Problem Solver,” universally versatile and suitable for a large number of materials • High and fast material removal rate• Very long service life • Consistent grinding performance• Easy to use

Wet/DryGOLD LINE

HAND GRINDING / MANUAL GRINDING H S E CCER


KGS Flexis® Diamond HandpadModel KGS Flexis®


Body Material Industrial foam

Grit 60, 120, 200, 400, 500, 1500, 3000

Dimensions 90x55 mm

KGS Flexis® GN-60 BK-120 RD-200 YE-400 WH-500 BL-1500 OR-3000

90 x 55 1041.0200011 1041.0200012 1041.0200013 1041.0200014 1041.0200025 1041.0200026 1041.0200027


Description / CharacteristicsKGS Flexis® Diamond Handpads are made of a foam body with a diamond-coated grinding and polishing surface. The KGS Flexis® Dot-Design is considered an economic industrial product solution.

Application / UseHand Grinding Dry and Wet GrindingKGS Flexis® Diamond Handpads can be used for natural stone, ceramic, engineered stone, concrete, compos-ite, glass, and many more.

Type of ProcessGrinding and polishing from rough grinding to fine polishing. Very well suited for hand grinding of hard-to-reach places, corners, edges, and for manual work, such as deburring, tool sharpening, and general defect removal. Wetting the grinding surface with a little bit of water improves the grinding process.

Advantages• “Problem Solver,” universally versatile and suitable for a large number of materials • High and fast material removal rate• Offers an excellent ratio of price to service life and performance• Easy to use

HAND GRINDING / MANUAL GRINDING H S E CCER

Wet/DrySILVER LINE


KGS Flexis® Diamond WhetstoneModel KGS Flexis®

Bond Metal bonded diamond

Body Material Aluminum plate

Grit 120, 200, 400

Dimensions 150x50 mm

KGS Flexis® BK-120 RD-200 YE-400 200-400 Combination

150 x 50 1044.0201512 1044.0201513 1044.0201514 1044.0205313


Description / CharacteristicsKGS Flexis® Whetstone is metal bonded diamond. The aluminum support plate has plastic nubs on the back, preventing the slipping of whetstone during sharpening.

Application / UseDry and Wet GrindingGrinding and Polishing

Type of ProcessVery well suited for sharpening tools, deburring, and defect removal.

Advantages• For both dry and wet grinding and polishing• Manually controlled sharpening

HAND GRINDING / SHARPENING H S ECER C

Wet/DryGOLD LINE


Description / CharacteristicsThe KGS tool kit “Profi” contains the most im-portant diamond tools for natural stone process-ing companies, stonemasons, stone floor repair-ers, landscape architects, tile manufacturers, assembly teams, and construction companies. The KGS Diamond TSP System optimally meets all possible needs in the cutting, grinding, and polishing of a wide range of difficult building materials. The toolkit includes grit sizes 60-10,000, all of which guarantee excellent polish results.

TOOLKIT


KGS ToolkitModel Construction “Profi”, 19-piece

Material Plastic

Dimensions 395 x 295 x 106 mm

Art. Nr. 0.2015.profi

Price

Application / UseGrinding, dry and wetThe focus is on the cutting, grinding, and polishing of hard stone, soft stone, ceramic, engineered stone, and concrete.

Type of ProcessCutting and grinding on boths sides in one process. Material removal and grinding of all stone and ceramic materials. Chamfering, edge and surface grinding from rough grinding to fine polishing, defect removal, de-burring, manual hand grinding and many more.

Advantages• Universal: Solution for all stone and ceramic materials• Durable: Diamond tools with a very long service life and consistent quality• Professional: High grade diamond abrasives for professional dry and wet grinding• All common processes for cutting, grinding, and polishing can be carried out with KGS Premium

diamond tools and an angle grinder or manually (by hand).• The application and product information are printed the back of the toolkit as an aid• Practical toolkit, diamond tool set, and standard M14 back-up pad, all ready for use

TOOLKIT

Wet/DryGOLD LINE

Content Description Quantity Art. Nr.

KGS Swiflex® Cobra 2.0 Ø125 mm, double sided, M14 Fl. 1 3023.20781

KGS Hybrid® Diamond Flap Disc Ø115/22.2 mm, K60 1 4024.00001

KGS Swiflex® SDA Set Ø115 /15 mm, velcro (6 Grit K120-K3000) 1 4023.00059

Adaptor Ø115 mm, velcro, M14 1 8851.00422

Adaptor Ø115 mm, velcro, M14, with foam support 1 8851.10029

KGS Hybrid® PRO Ø100/15 mm velcro GN-60 1 3023.30253

KGS Hybrid® PRO Ø100/15 mm velcro, BK-120 1 3023.30254

KGS Hybrid® PRO Ø100/15 mm velcro, RD-200 1 3023.30255

KGS Hybrid® PRO Ø100/15 mm velcro, YE-400 1 3023.30256

KGS Hybrid® PRO Ø100/15 mm velcro, WH-800 1 3023.30257

KGS Hybrid® PRO Ø100/15 mm velcro, BL-1500 1 3023.30258

KGS Hybrid® PRO Ø100/15 mm velcro, OR-3000 1 3023.30259

KGS Hybrid® PRO Ø100/15 mm velcro, 10,000, dark 1 3023.30261

KGS Hybrid® PRO Ø100/15 mm velcro, 10,000, light 1 3023.30260

M14 Adaptor with velcro Ø100 mm 1 8851.10033

KGS Flexis® Handpad 90x55 mm, GN-60 1 1041.0200011

KGS Flexis® Handpad 90x55 mm, BK-120 1 1041.0200012

KGS Flexis® Handpad 90x55 mm, RD-200 1 1041.0200013

KGS Flexis® Handpad 90x55 mm, YE-400 1 1041.0200014

H S E CCER

Unit Price in €

Sale Price10% Discount!


KGS ToolkitModel "Tile & Natural Stone", 21-piece

Material Plastic


Art. Nr. 0.2017.F&N

Price

TOOLKIT

Wet/DryGOLD LINE

H S E CCER


Toolkit Contents Quantity Art. Nr. Unit Price in €

KGS Swiflex® Cobra 2.0 Cutting/Grinding Disc, Ø 125 mm, Electroplated diamond on both sides, M14 Adaptor

1 3023.20781

KGS RED™ K835 Diamond Cutting Disc, Ø 125 mm x 22,23 x 1,4 mm 1 8102.10091

KGS Swiflex® CX Diamond Polishing Disc Set, Ø 100 mm / 15 mm, QRS, set includes 7 grits, 60, 120, 200, 400, 800, 1500, 3000

1 PU 4023.00336

KGS Swiflex® XX Diamond Polishing Disc Set, Ø 100 mm / 15 mm, QRS, set includes 7 grits, 60, 120, 200, 400, 800, 1500, 3000

1 PU 4023.00322

KGS Hybrid® Diamond Flap Disc Ø 115 mm x M14, grit GN-60 1 4024.00102

KGS Flexis® Diamond Handpad 90x55 mm, grit GN-60 1 1041.0200011

KGS Flexis® Diamond Handpad 90x55 mm, grit BK-120 1 1041.0200012

KGS Flexis® Diamond Handpad 90x55 mm, grit RD-200 1 1041.0200013

KGS Back-up pad, Velcro, Ø 100xM14, Standard 1 8851.10033

Toolkit “Tile & Natural Stone” Description Cutting, grinding and polishing of construction materials such as natural stone, ceramics, engineered stone and concrete are important operations to tile installers, natural stone processing companies, stonemasons, and builders of all types. We are proud to offer a “KGS Toolkit for Tile & Natural Stone” that contains the most important diamond tools for construction professionals. The toolkit contains the most popular cutting, grinding & polishing tools for construction materials, including abrasive grit ranges from 60 to 3000 grit. This gives the professionals the diamond solutions they need to work quickly, accurately and efficiently on virtually any building material.

ApplicationsFor cutting, grinding or polishing of hard or soft stones, engineered stones, ceramics or concrete, working with normal angel grinders, with WET and DRY working capabilities.

Type of ProcessTools in the kit are capable of cutting, grinding and deburring a broad range of construction materials. De-pending on the use, can go from heavy material removal to fine polishing. Tools are well adapted to working on edges, special shapes or surface grinding & polishing.

Advantages• The KGS Toolkit is a “universal” system, providing simple solutions to many cutting, grinding & polishing

applications, in a safe, fast, efficient way, all in 1 package.• The KGS Toolkit provides “durable” tools, giving the very best service life and quality• The KGS Toolkit provides “professional” tool solutions giving the highest levels of performance in the

most demanding situations• Detailed product information is conveniently located on the back of the Toolkit• The KGS Toolkit is a complete assortment of the tools you need, including important accessories to make

the job safe and productive.

NEW !


Toolkit “Building & Renovation” DescriptionCutting and grinding, heavy material removal of construction materials such as natural stone, ceramics, engineered stone, bricks, paving stones and concrete are important operations for building & renovation contractors. We are proud to offer a “KGS Toolkit “Building & Renovation” that contains the most important diamond tools for getting tough jobs done, removing rough edges and hard materials quickly and safely. The toolkit contains the most popular cutting and grinding tools for construction materials, with specific coarse grit ranges to get the job done fast. This gives the professionals the premium abrasive solutions they need to work quickly and efficiently on virtually any building material. The KGS Swiflex® Cobra 2.0 cutting / grinding discs and the KGS Semi-Flexi-ble SiC grinding discs are the choice of professionals.

Applications For cutting and grinding of hard or soft stones, engineered stones, bricks, ceramics or concrete, working with normal angel grind-ers, designed for DRY working conditions.

Type of ProcessWith the KGS Swiflex® Cobra 2.0, you have the ability to cut and grind with the same tool, same set-up, same operation, so quick and easy to use, no lost time changing tools. Rough to medium grinding, deburring, chamfering and surface grinding are a breeze with the KGS Swiflex Cobra 2.0 disc. Combined with the KGS Semi-Flex SiC discs, you can easily manage material removal on com-plex shapes or any visible defects on concrete surfaces.

Advantages• The KGS Toolkit is a “universal” system, providing simple solutions to many cutting and grinding applications, in a safe, fast,

efficient way, all in 1 package.• The KGS Toolkit provides “durable” tools, giving the very best service life and quality• The KGS Toolkit provides “professional” tool solutions giving the highest levels of performance in the most demanding situations• The KGS Swiflex® Cobra 2.0 , with it’s fitted M14 adaptor, is the most versatile, fast, easy to use, cutting & grinding disc in any

toolbox!• The KGS Semi-Flex SiC premium abrasive disc removes material fast, with a soft feel and vibration free grinding action.• Detailed product information is conveniently located on the back of the Toolkit• The KGS Toolkit “Building & Renovation” is a complete assortment of the tools you need, including important accessories to

make the job safe and productive.

KGS ToolkitModel "Building & Renovation", 24-piece

Material Plastic


Art. Nr. 0.2017.B&S

Price

TOOLKIT

DryGOLD LINE

H S C


Toolkit Contents Quantity Art. Nr. Unit Price in €


1 3023.20781


1 3023.20783

KGS Semi-flexible Grinding Disc SIC, Ø 127 mm x 22,23 FL, N, C24 grit 24 (1 PU = 5 Grinding Discs)

1 PU 4211.01452

KGS Semi-flexible Grinding Disc SIC, Ø 127 mm x 22,23 FL, N, C60 grit 60 (1 PU = 5 Grinding Discs)

1 PU 4211.01454

KGS Semi-flexible Grinding Disc SIC, Ø 178 mm x 22,23 B, H12, C24 grit 24 (1 PU = 5 Grinding Discs)

1 PU 4211.01457

KGS Semi-flexible Grinding Disc SIC, Ø 178 mm x 22,23 B, H12, C60 grit 60 (1 PU = 5 Grinding Discs)

1 PU 4211.01459

KGS Back-up pad, without velcro, metal clamping nut, Ø 123 mm, for Semi-flexible discs Ø 127 mm

1 8851.90100

KGS Back-up pad, without velcro, metal clamping nut, Ø 173 mm, for Semi-flexible discs Ø 178 mm

1 8851.90101

ECER

NEW !


KGS ToolkitModel Construction “Basic”, 9 pieces

Material Plastic


Art. Nr. 0.2015.basic

Price

Description / CharacteristicsThe KGS Construction “Basic” Toolkit includes the most important diamond tools for natural stone processing companies, stone cutters, stone floor repairers, landscape architects, tile manufacturers, assembly teams, and construction companies. The KGS Diamond TSP System optimally meets all possible needs in the cutting, grinding, and polishing of a wide range of difficult building materials. The toolkit contains grit sizes of 60-3000, all of which guarantee excellent polish results.

Application / UseGrinding, dry and wetThe focus is on the cutting, grinding, and polishing of hard stone, soft stone, ceramic, engineered stone, and concrete.

Type of ProcessCutting and grinding on both sides in one process. Material removal and grinding of all stone and ceramic materials. Chamfering, edge and surface grinding from rough grinding to fine polishing, defect removal, de-burring, manual hand grinding and many more.

Advantages• Universal: Solution for all stone and ceramic materials• Durable: Diamond tools with a very long service life and consistent quality• Professional: High-grade diamond abrasives for professional dry and wet grinding• All common processes for cutting, grinding, and polishing can be carried out with KGS Premium

diamond tools and an angle grinder or manually (by hand).• The application and product information are printed on the back of the toolkit as an aid• Practical toolkit, diamond tool set, and standard M14 back-up pad, all ready for use

TOOLKIT

Content Description Quantity Art. Nr. Unit Price in €

KGS Swiflex® Cobra 2.0 Ø125 mm, double sided, M14 Fl. 1 3023.20781

KGS Hybrid® Diamond Flap Disc Ø115/22.2 mm, K60 1 4024.00001

KGS Swiflex® SDA Set Ø115 /15 mm, velcro (6 Grit K120-K3000) 2 4023.00059

M14 Adaptor with velcro Ø115 mm 1 8851.00422

KGS Flexis® Handpad 90x55 mm, GN-60 1 1041.0200011

KGS Flexis® Handpad 90x55 mm, BK-120 1 1041.0200012

KGS Flexis® Handpad 90x55 mm, RD-200 1 1041.0200013

KGS Flexis® Handpad 90x55 mm, YE-400 1 1041.0200014

Wet/DrySILVER LINE

H S E CCER



KGS Stone Care ProgramThis program includes a selection of products for cleaning, protecting, and caring for natural stone, ceramic, engineered stone, and concrete surfaces. Professional products for interior areas with natural stone, tiles and slabs, kitchen counters, natural stone floors and stairs, as well as terraces and other outdoor applications can be found on the following pages. For cleaning in construction, maintenance cleaning, stain removal, protection, and care, we offer appropriate and consistently high-quality product solutions for professional use. The KGS Stone Care Kits for granite, engineered stone, ceramic, and stone universally complete the program.

CHEMICALS Cleaning, Protecting, and Care


Hard stone; granite, basalt, gneiss, porphyry, quartzite Product Name Description Page

Cleaning

Removal of residue caused by work on polished or matt finished stone and tile surfaces K12 Multicleaner Solvent-based cleaner 52

Alkaline cleaner, removes tough stains K14 Deep Cleaning Alkaline cleaner 53

Effective removal of rust and rust stains/discoloration K17 Rust Clean Acid cleaner 54

Removal of scum, mortar and cement from new installationsK19 Cement Coating Remover

Acid cleaner55

Scouring agent for matt finished and polished surfaces K35 Nano Cream Water-based scouring agent 56

Cleaning and gloss renewal in one step K36 Wipe & Gloss Cleaning & Gloss 57

Protection

“High-Performance Color Enhancer”, extremely water-resistant, highlights the natural color very well and eliminates microcracks, stains, and shading on natural stone slabs

K20 Zip & Shine High-performance color enhancer, solvent-based

58

Solvent-based stain protection for almost all , ground, and polished surfaces; penetrates the surface and forms an invisible protective film

K21 Platinum Solvent Solvent-based color enhancer 59

Solvent-based stain guard K28 Stain Guard Solvent-based color enhancer 61

Care

Everyday cleaning and care of kitchen workplaces/counters (water-based cleaning products) K36 Wipe & Gloss Cleaning & Gloss 57

Everyday cleaning and care of kitchen workplaces/counters (water-based scouring agents) K35 Nanocream Water-based scouring agent 56

Stone Care Set - Granite (Protection, gloss enhancement) - - 62

Stone Care Set - Universal (Gloss renewal) - - 62

CHEMICALS KGS Stone Care Program – Application Recommendations

H

Soft stone; marble, limestone, dolomite, travertine, sandstone Product Name Description Page

Cleaning


Protection

Stain guard with color enhancer K20 Zip & Shine High-performance color enhancer,

solvent-based58

Care

Stone Care Set - Universal (Gloss renewal) - - 62

S

Ceramic; stoneware, earthenware, cotto, clinker Product Name Description Page

Cleaning

Removal of residue caused by work on polished or matt finished stone and tile surfaces K12 Multicleaner Solvent-based cleaners 52


Protection

Protection of kitchen workplaces/counters, water-resistant K21 Platinum Solvent Solvent-based color enhancer 59

Stain guard with color enhancerK20 Zip & Shine High-performance color enhancer,

solvent-based58

Care

Everyday cleaning and care of kitchen workplaces/counters K36 Wipe & Gloss Cleaning & Gloss 57

Everyday cleaning and care of kitchen workplaces/counters K35 Nanocream Water-based scouring agent 56

Stone Care Set – Ceramic (Care / Protection) - - 62

Stone Care Set – Universal (Gloss renewal) - - 62

CER

Engineered stone: Quartz material, agglo, concrete, terrazzo, solid surface material Product Name Description Page

Cleaning

Removal of residue caused by work on polished or matt finished stone and tile surfaces K12 Multicleaner Solvent-based cleaner 52


Protection

Stain guard for engineered stone K26 Stone Seal Solvent-based color enhancer 60

Protection of kitchen workplaces/counters, water-resistant K21 Platinum Solvent Solvent-based color enhancer 59

Stain Guard with color enhancer (protection)K20 Zip & Shine High-performance color enhancer,

solvent-based58

Care

Everyday cleaning and care of kitchen workplaces/counters K36 Wipe & Gloss Cleaning & Gloss 57

Everyday cleaning and care of kitchen workplaces/counters K35 Nanocream Water-based scouring agent 56

Stone Care Set – Engineered Stone (protection, gloss renewal) - - 62

Stone Care Set – Universal (gloss renewal) - - 62

E

Concrete: General Building Materials Product Name Description Page

Effective removal of rust and rust discoloration K17 Rust Clean Acid cleaner 54

Removal of scum, mortar and cement K19 Cement Film Remover

Acid cleaner55

C


KGS K12 MulticleanerModel K12 Multicleaner 1L

Description Cleaner / Solvent-based all-purpose cleaner

Content 1 Liter

Art. Nr. 8950.10000

Price

Description / CharacteristicsKGS K12 Multicleaner removes stubborn traces such as sealants, waxes, coatings, adhesive residue, and pencil markings.

Recommended ApplicationNatural stone, granite, marble, terrazzo, ceramic, paving stone, stone slabs, concrete slabs, and cement slabs.

• Effective cleaning for all types of polished or matt finished stones and tiles• Water and solvent resistant surfaces• Removes sealants, impregnations, and processing residues• Suitable for private and commercial use both indoors and outdoors• For heavy cleaning, use the K14 and K19• Please follow the recommended usages for all products

Packing Unit1 Liter Can, 10 x 1 Liter/Box

DilutionThe products are ready to use, do not dilute

Yield • Terra Cotta floors with waxed surfaces approximately 10 - 15 m2

• Natural stone surfaces approx. 6-10 m²• Ceramic and engineered stone slabs approx.10-15 m²Note: Yield values can differ in cases of porous or highly textured surfaces.

Process It is recommended to dampen the surface, and then vacuum clean or wipe away excess dirt. Apply the clean-ing solution to the soiled area and allow the solution to work for 3 to 5 minutes, then use a scrubber or nylon pad, depending on the surface finish. Do not allow the cleaning solution to dry onto the surface. The clean-ing process can be done manually or with a machine, but a brush head or a nylon pad should be used for scrubbing according to the type and size of the surface. Wipe away the dirt with a cloth or a wet vacuum, then remove excess detergent with water. For stubborn dirt, simply repeat the process. Cover solvent-sensitive areas such as rubber, plastic, plants, and freshly painted or glazed surfaces. It is recommended to first test the product on an inconspicuous area on the surface.

Please follow the treatment and safety instructions.

GOLD LINE

CHEMICALS Cleaner


KGS K14 Deep CleaningModel K14 Deep Cleaning 1L

Description Cleaner / Alkaline Cleaner

Content 1 Liter

Art. Nr. 8950.10001

Price

Description / CharacteristicsKGS K14 Deep Cleaning is an alkaline cleaning concentrate. It dissolves stubborn dirt, removes traces, de-greases, and prevents the build-up of mold and fungi.

Recommended ApplicationMarble, granite, natural stone, terrazzo, ceramic, terra cotta, broken stone, stone slabs, cement slabs, and concrete slabs.

• Can be used for almost all polished and ground surfaces, indoors and outdoors.• For interior and exterior use, for example, in kitchens, bathrooms, and outdoor terraces• Will not damage existing sealants or coatings, biodegradable• Manual or machine use, as well as both commerical and personal• Effective removal of stubborn stains such as oil and grease• Cleaning concentrate for stubborn stains


DilutionSee below

YieldLight soiling 100 ml cleaner to 2 Liters of water (1:20) approx. >100 m² Medium soiling 100 ml cleaner to 1 Liter of water (1:10) approx. 50 m²Heavy soiling 100 ml cleaner to 500 ml of water (1:5) approx. 25 m²

Note: The yield values are only a guideline and may vary depending on porosity, surface texture, and other factors.

Process It is recommended to dampen the surface, and then vacuum clean or wipe away excess dirt. Apply the clean-ing solution to the soiled area and allow the solution to work for 3 to 5 minutes, then use a scrubber or nylon pad, depending on the surface finish. Do not allow the cleaning solution to dry onto the surface. The clean-ing process can be done manually or with a machine, but a brush head or a nylon pad should be used for scrubbing according to the type and size of the suraface. Wipe away the dirt with a cloth or a wet vacuum, then remove excess detergent with water. For stubborn dirt, simply repeat the process. Cover solvent-sensitive areas such as rubber, plastic, plants, and freshly painted or glazed surfaces. It is recommended to first test the product on an inconspicuous area on the surface.


GOLD LINE

CHEMICALS Cleaning


KGS K17 Rust CleanModel K17 Rust Clean 1L

Description Cleaner / Acid-containing rust removal

Content 1 Liter

Art. Nr. 8950.10003

Price

Description / CharacteristicsKGS K17 Rust Clean is an acid-containing cleaning concentrate. It dissolves and removes heavy rust spots from many different surfaces.

Recommended ApplicationGround, flame textured, and unpolished marble, natural stones, stone tiles, paving stones, and polished granite slabs and tiles. Not suitable for polished marble or concrete, nor other polished materials containing calzite.

• Effective removal of rust and rust discoloration caused by natural chemical reactions of metal with the stone surface, such as manganese, which oxidises when exposed to increased moisture.

• For use indoors and outdoors (e.g. garden terraces and paving stones)• For professional use, please follow the treatment and safety instructions• Can remove aluminum and metal stains • Floor and worktop/countertop cleaning


DilutionMedium soiling 100 ml cleaner to 500 ml water (1:5)Heavy soiling 100 ml cleaner to 100 ml water (1:1)Do not dilute for extremely deep and stubborn rust spots on polished granite

YieldUsage per Liter 1-10 m² depending on dilution and surface type

Note: The yield values are only a guideline and may vary depending on porosity, surface texture, and other factors.

Treatment It is recommended to first test the product on an inconspicuous area on the surface. Before applying the cleaner, moisten the surface, then apply with a nylon brush or scrubber depending on the texture of the soil-ing. Let the product work for 15 minutes, but do not let it dry onto the surface. For extremely stubborn rust discoloration, repeat the process with undiluted cleaner, or with diluted cleaner but let the product work a little longer (e.g. 20 minutes for granite). After removing stains, it is recommended to remove excess rust with the K14 Deep Cleaning (1:2 diluted with water) as a thorough after-treatment.


GOLD LINE

CHEMICALS Cleaning


KGS K19 Cement Film RemoverModel K19 Cement Film Remover 1L

Description Cleaner / Acid-containing special cleaner

Content 1 Liter

Art. Nr. 8950.10018

Price

Description / CharacteristicsThe KGS K19 Cement Residue Remover is an acid-containing special cleaner. It dissolves and removes mortar and cement residue, scum, limescale deposits, and stubborn dirt.

Recommended ApplicationFor use on ground, unpolished natural stones such as marble, granite, limestone, slate, travertine, terrazzo, as well as polished granite, porcelain, terra cotta, quarry stone, natural stone, concrete paving stones and grout.

• Effective removal of scum, mortar and cement residue from new installations• For use indoors and outdoors on unpolished and ground natural stone • Suitable for all acid-resistant natural stones, such as granite, gneiss, and quartzite as well as concrete sur-

faces, ceramics, and porcelain tiles• Professional and commercial use


DilutionLight soiling 100 ml cleaner to 2 Liters of water (1:20) approx. 50 m2

Medium soiling 100 ml cleaner to 1 Liter of water (1:10) approx. 15-20 m2

Heavy soiling 100 ml cleaner to 500 ml of water (1:5) approx. 10-15 m2

Extreme soiling 100 ml cleaner to 200 ml of water (1:2) approx. 5-10 m2

YieldYield/Liter 1-10 m² depending on dilution and type of surfaceNote: The yield values are only a guideline and may vary depending on porosity, surface texture, and other factors.

Treatment Light surface dirt should be wiped off or vacuumed. It is recommended to dampen the surface to be cleaned, and then apply the K19 cleaner with a nylon brush, a scrubber, or a cleaning machine with a pad or a brush, depending on the type of surface. Let the cleaner work for 2-5 minutes, but do not let it dry onto the surface. After applying the cement residue remover, it is recommended to apply a thorough after-treatment with the K14 Deep Cleaning (the dilution ratio is in the product description) to neutralize acid and remove the excess cleaner. Then wipe the surface down with water. If needed, simply repeat the process.

Note: Protect acid-sensitive surfaces and parts, such as andodized, chrome, glazed wood, etc. from splashing and vapors.


GOLD LINE

CHEMICALS Cleaning


KGS K35 Nano CreamModel K35 Nano Cream 200 ml

Description Cleaner / Water-based scouring agent

Content 200 ml

Art. Nr. 8950.10015

Price

Description / CharacteristicsKGS K35 Nano Cream is a water-based scouring agent that is specially developed for stubborn dirt and residue. It contains microparticles that enter the pores of the surface and dissolve stubborn dirt that other cleaners cannot reach. The product is non-toxic, non-flammable, and non-corrosive.

Recommended ApplicationMarble, granite, ceramic, terrazzo, engineered stone, natural stone, and many more.

• Indoors and Outdoors• Suitable for all polished and ground floors, countertops/worktops, tiled stoves/fireplaces, and window sills• Removes all factory made waxes and sealants, such as grout/mortar and epoxy residues. • Removes plastic residue that can be left from vacuum cleaner nozzles on light colored surfaces• Ideal for cleaning ceramics in bathrooms

Packing Unit200 ml Bottle

DilutionReady to use, but shake before using

YieldDepending on the surface 5 m2 to 50 m2 per Liter Note: The yield values are only a guideline and may vary depending on porosity, surface texture, and other factors.

Treatment It is recommended to dampen the surface, and then vacuum clean or wipe away excess dirt. Before applying the cleaner, dampen the surface. Then apply the product with a white cloth or spatula. For old, stubborn stains, such as colored pencil markings, apply the K35 Nano Cream thicker and allow it to work for 30 min-utes. Afterwards, wipe away excess cleaner with water and a cloth. If needed, simply repeat the process. For extremely stubborn stains, use the K35 Nano Cream without water, and then wipe away any excess cleaner with water and a clean cloth.


GOLD LINE

CHEMICALS Cleaning


KGS K36 Wipe & GlossModel K36 Wipe & Gloss 200ml

Description Cleaner / Water-based gloss renewal

Content 200 ml

Art. Nr. 8950.10006

Price

Description / CharacteristicsKGS K36 Wipe & Gloss is a cleaner / water-based gloss renewal product

Recommended ApplicationMarble, granite, natural stone, ceramic, terrazzo, engineered stone, quartz stone, concrete stone, suitable for almost all surfaces.

• Indoors and Outdoors• Cleaning and gloss renewal in one step• Food-safe• Ideal for cleaning kitchen surfaces, bathrooms, and window sills.• Removes general dirt and dust in one step without leaving smears or streaks.

Packing Unit200 ml Spray Bottle

DilutionReady to use, but shake before use

YieldDepending on the surface 5 m2 to 50 m2 per Liter. Note: The yield values are only a guideline and may vary depending on porosity, surface texture, and other factors.

Treatment Shake the bottle before use. Simply spray the product onto the desired surface and rub with a clean cloth. To achieve an even higher gloss result, repeat the process. It is recommended to first test the product on an inconspicuous area on the surface.


GOLD LINE

CHEMICALS Cleaning


KGS K20 ZIP & SHINEModel K20 ZIP & SHINE

Description Protection / Color enhancer, Solvent-based

Content 1 Liter 5 Liter

Art. Nr. 8950.10009 8950.10011

Price

Description / CharacteristicsSolvent containing protector with color enhancer; eliminates fine microcracks, stains, and shading on granite and natural stone slabs. This is a strong performance color enhancer, highly water-resistant to highlight natu-ral gloss.

Recommended ApplicationK20 ZIP & SHINE is a solvent-containing protector with color enhancer for polished and ground marble, granite, and natural stone. The product does not leave a visible film on the surface, it is moisture permeable (allowing the surface to breathe), UV-resistant, and ideal for restoration work.• Application in indoor and outdoor areas on polished and ground stone tiling • Especially suitable for raw slabs, kitchen countertops, headstones, statues, monuments, and natural stone

floors • Removes shading and stains, ensures an even appearance and a natural color composition

Packing Unit1-Liter-Bottle (1 Box/10 x 1 Liter) or 5-Liter-Bottle (1 Box/ 2 x 5 Liter)

DilutionThe product is ready to use, do not dilute

YieldRough surfaces 10-20 m2

Matt surfaces 20-30 m²Polished surfaces 40 m²Note: Yield values may differ in cases of porous or highly textured surfaces.

Treatment The surface must be clean and dry, and all residues from other products should be removed. It is recommended to first test the product on an inconspicuous area on the surface. Cover all solvent-sensitive areas and protect them from splashing. Apply the product with a roller, a scrubber, or a cloth. If the material is very porous, it is recommended to let the product work on the surface for a minimum of 2 and a maximum of 6 hours. On compact or dense stone surfaces, it is recomended to let the product work for a minimum of 30 minutes and up to 2 hours to ensure that the product is absorbed and the maximum effect is attained. Remove residues with steel wool or a nylon brush. If needed, the product can be reapplied after a minimum of 12 to 24 hours. KGS K20 Zip & Shine can be removed from the test area within one hour. It is recommended to use a cleaning machine with a white nylon pad to remove residues from floor surfaces. The temperature of the surface you would like to work on should not be under 10 °C. During outdoor use, avoid direct sunlight. The water-soluble stain-resistant K30 Stainstop-W provides additional protection against water spots on rough and ground sur-faces. Solvent-containing products are not suitable to use with K20.


GOLD LINE

CHEMICALS Protecting


KGS K21 PLATINUM SOLVENTModel K21 PLATINUM SOLVENT

Description Protection / Stain protection, Solvent-based

Content 5 Liter

Art. Nr. 8950.10020

Price

Description / CharacteristicsKGS K21 Platinum Solvent is a solvent-based stain protection product for almost all , ground, and polished surfaces. K21 penetrates the surface and forms an invisible, moisture-permeable, UV-resistant protective film against moisture and stains from oil, grease, coffee, tea, food, general soiling, mold, and fungus. Note: Some stones, such as marble and limestone, are acid-sensitive. It is recommended to wipe away any spills immediately.

Recommended ApplicationMarble, granite, limestone, natural and engineered stone, terra cotta, stone and cement slabs• For indoor and outdoor use• Suitable for floors, worktops, and wet areas• Effective protection against scum, discoloration, and oxidation spots

Packing Unit5-Liter-Bottle (1 Box/2 x 5 Liter)

DilutionThis product is ready to use, do not dilute

YieldPorous stone (sandstone) 6 – 8 m² Medium porosity stone (ground stone, limestone) 10 – 20 m² Low porosity stone (polished stone) 20 – 30 m² Higher density stones 30 – 40 m² Note: The yield values can vary depending on the porosity and texture of the surface.

Treatment The surface should be clean and dry, all other product residues should be completely removed. It is recommend-ed to first test the product in an inconspicuous area on the surface. Cover all solvent-sensitive areas and protect them from splashing. Apply K21 Platinum Solvent evenly with a low pressure hand pump, a conventional gar-den sprayer or a wool roller. On worktops/countertops a cloth can also be used. Spraying the product onto the surface is the most effective method. For particularly absorbant surfaces, a second coat can be applied after the first coat is absorbed and dried. It is recommended to first test the product in an inconspicuous area to assess whether an extra coat is necessary. Remove residue and airbubbles with a clean cotton cloth or paper towel, or use a machine with a white nylon pad for large areas such as flooring. The surface temperature should not be under 10 °C. During outdoor use, avoid direct sunlight. After 2 to 3 hours, the surface should be dry and safe to access. After 48 to 72 hours, the surface should be completely dry and protected.


GOLD LINE



KGS K26 Stone SealModel K26 Stone Seal

Description Protection / Stain protection, Solvent-based

Content 200 ml

Art. Nr. 8950.10014

Price

Description / CharacteristicsKGS K26 Stone Seal is a solvent-based stain protector for almost all and matt finished surfaces. K26 pene-trates the surface and forms an invisible, moisture-permeable, UV-resistant protective film against moisture and stains from oil, grease, coffee, tea, food, general dirt, mold, and fungus. Note: Some stones, such as marble and limestone, are acid-sensitive. It is recommended to wipe away spills immediately.

Recommended ApplicationEngineered Stone• For indoor and outdoor use• Suitable for flooring, worktops/countertops, and wet areas• Effective protection against scum, discoloration, and oxidation spots.


DilutionThis product is ready to use, just shake before use. Do not dilute.

YieldThe yield values may vary depending on porosity and texture of the surface as well as other environmental factors. General reference yield values cannot be provided.

Treatment The surface must be clean and dry, wipe away all residues from other products completely. It is recommend-ed to first test the product in an inconspicuous area on the surface. Cover all solvent-sensitive areas and protect them from splashing. Apply K26 Stone Seal evenly with a low pressure hand pump, a conventional garden sprayer or a wool roller. On worktops/countertops a cloth can also be used. Spraying the product onto the surface is the most effective method. For particularly absorbant surfaces, a second coat can be applied after the first coat is absorbed and dried. It is recommended to first test the product in an inconspicuous area to assess whether an extra coat is necessary. Remove residue and airbubbles with a clean cotton cloth or pa-per towel, or use a machine with a white nylon pad for large areas such as flooring. The surface temperature should not be under 10 °C. During outdoor use, avoid direct sunlight. After 2 to 3 hours, the surface should be dry and safe to access. After 48 to 72 hours, the surface should be completely dry and protected.


GOLD LINE



KGS K28 Stain GuardModel K28 Stain Guard

Description Protecting / Stain protection, Solvent-based

Content 200 ml

Art. Nr. 8950.10013

Price

Description / CharacteristicsKGS K28 Stain Guard is a solvent-based stain protector for almost all polished, , and matt finished surfaces. K28 penetrates the surface and forms an invisible, moisture-permeable, UV-resistant protective film against moisture and stains from oil, grease, coffee, tea, food, general dirt, mold, and fungus. Note: Some stones, such as marble and limestone, are acid-sensitive. It is recommended to wipe away spills immediately.

Recommended ApplicationMarble, granite, limestone, natural and engineered stone, terra cotta, stone and cement slabs• For indoor and outdoor use• Suitable for floors, worktops/countertops, and wet areas• Effective protection against scum, discoloration, and oxidation spots


DilutionThe product is ready to use, just shake before use

YieldPorous stone (sandstone) 3-6 m² Medium porosity (ground stone, limestone) 6-10 m² Low porosity (polished stone) 15-20 m² Higher density stones 20-30 m² Note: The yield values may vary depending on porosity and texture of the surface.

Treatment The surface must be clean and dry, wipe away all residues from other products completely. It is recommend-ed to first test the product on an inconspicuous area on the surface. Cover all solvent-sensitive areas and pro-tect them from splashing. Apply the K28 Stain Guard evenly with a low pressure hand pump, a conventional garden sprayer, or a wool roller. On worktops/countertops a cloth can also be used. Spraying the product onto the surface is the most effective method. For particularly absorbant surfaces, a second coat can be ap-plied after the first coat is absorbed and dried. It is recommended to first test the product in an inconspicuous area to assess whether an extra coat is necessary. Remove residue and airbubbles with a clean cotton cloth or paper towel, or use a machine with a white nylon pad for large areas such as flooring. The surface temper-ature should not be under 10 °C. During outdoor use, avoid direct sunlight. After 2 to 3 hours, the surface should be dry and safe to access. After 48 to 72 hours, the surface should be completely dry and protected.


GOLD LINE



KGS Stone Care Set – GraniteDescription CharacteristicsContent

1x KGS K28 Stain Guard – Protection 200 ml1x K36 Wipe & Gloss – Everyday Cleaning 200 ml1x Gloves1x Cleaning cloth1x Instructions, DIN A5 card

Recom. application / Use Use on natural stone, granite

Art. Nr. 8950.10101

Price

KGS Stone Care Set – Engineered StoneDescriptionCharacteristicsContent

1x KGS K26 Stone Seal – Protection 200 ml1x K36 Wipe & Gloss – Everyday Cleaning 200 ml1x Gloves1x Cleaning cloth1x Instructions, DIN A5 card

Recom. application / Use Use on engineered stone

Art. Nr. 8950.10103

Price

KGS Stone Care Set – CeramicDescriptionCharacteristicsContent

1x KGS K35 Nano Cream – Cleaner 200 ml1x K36 Wipe & Gloss – Everyday Cleaning 200 ml1x Gloves1x Cleaning cloth1x Instructions, DIN A5 card

Recom. application / Use Use on ceramic

Art. Nr. 8950.10102

Price

KGS Stone Care Set – UniversalDescriptionCharacteristics Content

2x K36 Wipe & Gloss – Everyday Cleaning 200 ml1x Microfiber cloth1x Gloves1x Cleaning cloth1x Instructions, DIN A5 card

Recom. application / Use Suitable for gloss renewal on almost all stone materials

Art. Nr. 8950.10100

Price

GOLD LINE

CHEMICALS Care

Packing Unit10 Sets / Box!Please follow the treatment and safety instructions.


Quick Finder Overview: KGS Stone Care Program

Nr. Product Description / Use Art. Nr. Content

1 K12 Multicleaner Cleaner Solvent-based all purpose cleaner

8950.10000 1 L

2 K14 Deep Cleaning Cleaner Alkaline cleaner 8950.10001 1 L

3 K17 Rust Clean Cleaner Acid-containing rust remover 8950.10003 1 L

4K19 Cement Film Remover

Cleaner Acid-containing special cleaner 8950.10018 1 L

5 K35 Nano Cream Cleaner Water-based scouring agent 8950.10015 200 ml

6 K36 Wipe & Gloss Cleaner Cleaning & Gloss renewal 8950.10006 200 ml

7 K20 Zip & Shine Protection Solvent-based color enhancer 8950.10009 1 L

8 K20 Zip & Shine Protection Solvent-based color enhancer 8950.10011 5 L

9 K21 Platinum Solvent Protection Solvent-based stain protection 8950.10020 5 L

10 K26 Stone Seal Protection Solvent-based stain protection for engineered stone

8950.10014 200 ml

11 K28 Stain Guard Protection Solvent-based stain protection 8950.10013 200 ml

12Stone Care SetGranite

Protection / Gloss renewal

Stone Care Set / Plastic Box 8950.10101 -

1x K28 Stain Guard

1x K36 Wipe & Gloss

1x Gloves, 1x Cleaning cloth

13Stone Care Set Engineered Stone

Protection / Gloss Renewal


1x K26 Stone Seal

1x K36 Wipe & Gloss


14Stone Care Set Ceramic

Care / Gloss renewal


1x K35 Nano Cream

1x K36 Wipe & Gloss


15Stone Care Set Universal

Gloss renewal Stone Care Set / Plastic Box 8950.10100 -

2x K36 Wipe & Gloss

1x Microfiber cloth


CHEMICALS Stone Care Program


Cleaning Product pH ValuesThe pH value indicates whether an aqueous solution reacts in an acidic or alkaline manner. The pH value is given in non-dimensional numbers of 1-14. An aqueous solution with a pH < 7 is acidic, a pH = 7 is neutral (corresponds to pure water), and a pH > 7 is alkaline.

Acid-containing or alkaline products are often used to clean surfaces. These types of cleaners dissolve and remove heavy soiling. If the surface is only lightly soiled, a pH-neutral cleaner can be used.

When and where to use each cleaner depends on your application.

Acid-Containing Cleaner FunctionsAcid-containing cleaners (acedic acid-based or formic acid-based) help with the removal of lime and rust. The lower the pH-value, the stronger the cleaner and the more effective it is. However, cleaners that are too strong can affect the surface texture, so it is recommended to choose the weakest product possible (between pH-values 5 and 7).

Alkaline Cleaner FunctionsThe main job of alkaline cleaners is the removal of different types of grease. The higher the pH-value, the higher the alkalinity and the cleaning effect. Alkaline cleaners that are too strong can also affect the surface (between pH-values 7 and 9).The use of very strong alkaline or acid-containing cleaners can be dangerous for the workers and the materi-al. Please read the material data safety sheets and the technical data sheets thoroughly. Never mix solutions of different pH-values by hand, and do not mix alkaline cleaners with acid cleaners.

pH-Value ScaleWhile a strong acid cleaner has a low pH-value, a strong alkaline cleaner has a high pH-value. The pH-Value Scale goes from 0 – 14, see below. Not all alkaline and acid cleaners are hazardous to health. Weaker clea-ners with a pH-value of approx. 7 can be found in many everyday-use products. Substances with a pH-value lower than 5 and higher than 9 should always be handled with gloves.

K19 Cement Cleaner

K14 Deep Cleaner

K17 Rust Cleaner K36 Wipe & Gloss Cleaner

pH Value

CHEMICALS pH Value


When using KGS Stone Care products it is important to note the following:

• Read and follow the treatment and safety instructions!• It is always recommended to first test products on a small inconspicuous area on the surface.• Wear gloves while applying the products• Keep the products out of the reach of children• Further information is provided on the safety data sheet (SDS), available at

Tel + 31(0)525 68 33 00 or via E-Mail [email protected]• Store dry. +0 °C

WarrantyThe above information has been compiled according to the current state of development and application technology of our company. However, we cannot guarantee the processing results in individual cases because of the large number of possible uses, storage, and conditions outside of our influence. KGS DIAMOND does not accept liability for direct, indirect, incidental, or consequential damages. The products should always be tested on a small inconspicous area on the surface before use.

CHEMICALS Use / Safety


KGS DIAMOND offers a small assortment of electric and pneumatic machines. In stone and ceramic processing, the use of handheld machines with adjustable speeds are commonplace in order to use the diamond grinding and polishing technology properly and universally.

On the product pages of the catalogue, the maximum speeds and recommended revolutions per minute are included to ensure optimal usage. The results depend on these parameters, along with other factors. The proper machine selection with the corresponding performance data is an important factor, in addition to the product type, grain size, cutting speed, and the contact pressure in wet or dry grinding.

KGS, using proprietary “Swiss Diamond Technology,” is a world renowned expert in grinding and polishing solutions for stone and ceramic processing. As a manufacturer, our goal is to be your most important partner in meeting your grinding and polishing needs.

MACHINES


MACHINES Handheld Machines

KGS PGW, Compressed Air Wet GrinderDescription KGS PGW 5 – Compressed Air Wet Grinder

Art. Nr. 8801.00001

Price

GOLD LINE Wet

Tool Holder / Spindle: M14Diameter: max. Diamond-Polishing Disc Ø 115 mmIdle Speed: Max. 5000 rpmPower Consumption: 321 WattWeight: 1,27 KgLength: 250 mmAir Consumption: 430 l/mAir Pressure: 6,2 BarSound level dB(A): 84Vibration: <2,5 m/s²Speed Control: variableWater Intake: central

• Little vibration and sound with excellent power and performance• Housing made of die cast materials with a long service life• A regulator for the variable control of the air volume• The water intake reduces dust and protects the operator and surroundings• Tool with reversible side handle, silencer, air hose adaptor, and a valve with a hose adaptor• For 100 mm and 115 mm back-up pads• Light and compact design, very suitable for single hand operation• Rubber cuff protects the hands from cold• Exhaust air is blown back out of the hose so that the operator does not get cold hands


FLEX Angle Grinder, 125 mm, L 1506 VRDescription FLEX L 1506 VR Angle Grinder, 125 mm, 1200 Watt

Art. Nr. 8801.00009

Price

GOLD LINE Dry

Tool Holder: M14Diameter: Max. Ø 125 mmIdle Speed: 2200 – 6800 rpmPower Consumption: 1200 WattPower Output: 700 WattCable Length: 4 mWeight: 1,9 Kg

MACHINES Handheld Machines

FLEX L12-3 100 WET (Electrical safety switch)Description FLEX L12-3 100 WET, Electric Wet Stone Polisher,

with Electrical safety switch

Art. Nr. 8801.00017

Price

GOLD LINE Wet

Tool Holder: M14Diameter: Max. Ø 115 mmIdle Speed: 1200 – 3700 rpmPower Consumption: 1150 WattPower Output: 700 WattDimensions (LxH): 350 x 140 mmCable Length: 4 mWeight: 2,4 Kg


KGS DIAMOND offers a comprehensive range of accessories and spare parts. Good equipment, determined by the different processes and uses, lays an optimal foundation and has a direct influence on the grinding and polishing result. With the KGS DIAMOND accessories you are well equipped! We will help you during the selection process to find the perfect products and achieve the best results. Contact us!

ACCESSORIES


KGS Back-up pad, Velcro, M14, StandardDescription KGS Back-up pad with velcro, standard for KGS

Diamond Polishing Discs

Dimensions Ø100 und Ø115 mm

Adaptor M14

KGS Back-up pad, without velcro, metal clamping nutDescription Back-up pad, without velcro, M14, hardness: medium

/soft, more shape adjustment, for a softer grind, with a metal clamping nut, for semi-flexible discs or K1 starbore

Dimensions Ø115, Ø125 and Ø178 mm

Adaptor M14

KGS Back-up pad, Velcro, M14 with Industrial FoamDescription Back-up pad with velcro and industrial foam, for a

softer grind, for KGS diamond polishing discs


Adaptor M14

Industrial foam 10 and 20 mm

GOLD LINE Wet/Dry

ACCESSORIES Back-up pad

Back-up pad Ø 100 mm Ø 115 mm

Art. Nr. 8851.10033 8851.00422


Back-up pad Ø 115 mm Ø 125 mm Ø 178 mm

Art. Nr. 8851.90035 8851.90100 8851.90101



10 mm industrial foam 8851.00423 8851.10029

20 mm industrial foam 8851.10424 8851.00425



GOLD LINE Wet/Dry

ACCESSORIES Back-up pad

KGS Swiflex® Back-up pad, without velcro, M14, whiteDescription Back-up pad, M14, without velcro, white, hardness:

hard, little shape adjustment, harder grind, quick clamping system, with cooling holes for semi-flexible discs or K1 starbore


Adaptor M14

KGS Swiflex® Back-up pad with a centering pin, redDescription Back-up pad, M14, red, hardness: medium, with cen-

tering pin, for metal bonded diamond polishing discs, for champfering and edge grinding

Dimensions Ø100, Ø115 und Ø125 mm

Adaptor M14

KGS Swiflex® Back-up pad, flexible with centering pinDescription Back-up pad, M14, velcro, black, hardness: medium/

flexible with centering pin, for resin bonded diamond grinding discs, for chamfering and edge grinding

Dimensions Ø100, Ø115 und Ø125 mm

Adaptor M14


Art. Nr. 8851.00427 8851.00428 8851.10013



Art. Nr. 8851.10018 8851.10016



Art. Nr. 8851.00429 8851.00430 8851.10005



Marketing and Service

For work on natural stone, ceramic, engineered stone, and concrete materials, KGS DIAMOND is introducing a new shelf/assortment system to the industry. The end user is offered a promotional toolkit of our di-amond tool system. The „Construction Material Toolkits“ Profi and Basic include all the most important tools. With this professional KGS grinding and polishing system, you can optimally handle a wide range of potentially difficult building materials as well as natural materials.

Marketing and Sales Support

• Product presentation in the KGS wall shelf and counter display• Trade fairs, support at house exhibitions• Leading joint sales campaigns• Craftsman breakfast, practice training• Tour Guide / KGS DEMO-VAN ROAD SHOW• Trader product training on site• Training in KGS DIAMOND TechCenter Elburg/NL

Tour Guide / KGS DEMO-VAN ROAD SHOW KGS Product Shelf

KGS DIAMOND Toolkit Construction


KGS TechCenter

KGS Diamond TechCenter TrainingWe offer you the best support possible in order to effectively boost your success as well as ours. At the KGS TechCenter Elburg on the Iysel Sea, we offer our trade partners and end customers product training.

Your advantages are: • To familiarize yourself with the product solutions and assortments• To deepen your abrasives and product knowledge, as well as theory and practice• To discuss and optimize the abrasives process• To experience the advantages of our product demonstrations “live”• To have access to a comprehensive machine program for practical use and process types• To participate in an exchange of views and opinions with other members of the field• Cutting-Edge Innovation!

We are looking forward to your visit to Elburg!

If you are interested, please contact your local sales representative or our sales partners.


REVOLUTIONS TABLE

Please adhere to the maximum work speeds.

The maximum working speed in revolutions per minute (rpm) is related to the tool diameter (D) and to the maximum work speed in meters per second on the chart below.

Dø mm

Maximum work speed in m/s

16 20 25 32 35 40 45 50 63 80

6 51000 64000 80000 102000 112000 128000 143240 160000 201000 -

8 38200 48000 60000 76500 84000 95500 107430 120000 150500 191000

10 30600 38200 48000 61200 67000 76500 86000 95500 120500 153000

13 23550 29500 35600 47100 51500 58800 66500 73500 92600 118000

16 19100 23900 29850 38200 41800 47800 54000 59700 75200 95500

20 15300 19100 23900 30600 33500 38200 43000 47800 60200 76500

25 12300 15300 19100 24500 26800 30600 34400 38200 48200 61200

32 9550 11950 14950 19100 20900 23900 26900 30000 37600 48000

40 7650 9550 11950 15300 16750 19100 21500 23900 30100 38200

50 6150 7650 9550 12250 13400 15300 17200 19100 24100 30600

63 4850 6100 7600 9750 10650 12150 13650 15200 19100 24300

80 3850 4800 6000 7650 8400 9550 10750 12000 15100 19100

100 3100 3850 4800 6150 6700 7650 8600 9550 12100 15300

115 2700 3350 4200 5350 5850 6650 7500 8350 10500 13300

125 2450 3100 3850 4900 5350 6150 6900 7650 9650 12250

150 2050 2250 3200 4100 4500 5100 5750 6400 8050 10200

180 1700 2150 2700 3400 3750 4250 4800 5350 6700 8500

200 1550 1950 2400 3100 3350 3850 4300 4800 6050 7650

230 1350 1700 2100 2700 2950 3350 3750 4200 5250 6650

250 1250 1550 1950 2450 2700 3100 3450 3850 4850 3150

300 1050 1300 1600 2050 2250 2550 2870 3200 4050 5100

350/356 875 1100 1400 1750 1950 2200 2450 2750 3450 4400

400/406 765 960 1200 1550 1700 1950 2150 2400 3050 3850

450/457 680 850 1100 1400 1500 1700 1950 2150 2700 3400

500/508 615 765 960 1250 1350 1550 1750 1950 2450 3100

600/610 510 640 800 1050 1150 1300 1450 1600 2050 2550


SAFETY RECOMMENDATIONS FOR THE USE OF ABRASIVE PRODUCTS

PASS ON THIS LEAFLET TO THOSE USING THE ABRASIVE PRODUCT

The recommendations contained in this leaflet should be followed by all users of abrasive products in the interests of their personal safety

GENERAL PRINCIPLES OF SAFETY

Abrasive products improperly used can be very dangerous. Always follow the instructions provided by the abrasive product and machine supplier. Ensure that the abrasive product is suitable for its intended use. Examine all abrasive

products for damage or defects before mounting. Follow the correct procedures for handling and storage of abrasive products.

Be aware of the hazards likely during the use of abrasive products and observe the recom-mended precautions to be taken:

Bodily contact with the abrasive product at operating speed Injury resulting from product breakage during use Grinding debris, sparks, fumes and dust generated by the grinding process Noise Vibration

Use only abrasive products conforming to the highest standards of safety. The following EN standards provide the essential safety requirements for relevant abrasives products:

EN 12413 for Bonded Abrasives EN 13236 for Superabrasives EN 13743 for Specific Coated Abrasives (vulcanised fibre discs, flap wheels, flap discs

and spindle-mounted flap wheels). Never use a machine that is not in good working order or one with defective parts. Employers should carry out a risk assessment on all individual abrasive processes to deter-mine the appropriate protective measures necessary. They should ensure that their employ-ees are suitably trained to carry out their duties. This leaflet is only intended to provide basic safety recommendations. For more detailed infor-mation on the safe use of abrasive products, reference to our comprehensive Safety Codes is strongly recommended. These are available from FEPA or your National Trade Association:

FEPA Safety Code for Bonded Abrasives and Precision Superabrasives FEPA Safety Code for Superabrasives for Stone and Construction FEPA Safety Code for Coated Abrasives

PRECAUTIONS AGAINST LIKELY HAZARDS Noise

Ear protection complying with EN352 is recommended for all applications where the workpiece or machine is hand-held, irrespective of the noise level.

Ensure that the correct abrasive product is selected. An unsuitable product can produce excessive noise.

Vibration

Processes where the workpiece or machine is hand-held can cause vibration injury. Action needs to be taken if tingling, pins and needles or numbness is experienced after

10 minutes continuous use of the abrasive product. The effects of vibration are more pronounced in cold conditions so keep the hands warm

and exercise hands and fingers regularly. Use modern equipment with low vibration lev-els.

Maintain all equipment in good condition and stop the machine and have it checked if excessive vibration occurs.

Use good quality abrasive products and keep them in good condition during their life. Maintain mounting flanges and back-up pads in good condition and replace if worn or

distorted. Do not grip the workpiece or machine too tightly and do not exert excessive pressure on

the abrasive product. Avoid continuous use of the abrasive product. Use the correct product. An unsuitable product can produce excessive vibration. Don't ignore the physical symptoms of vibration - seek medical advice.

DISPOSAL OF ABRASIVES

Used or defective abrasives should be disposed in accordance with local or national reg-ulations.

Further information can be obtained from Voluntary Product Information provided by the supplier.

Be aware that the abrasive product may be contaminated with material from the work-piece or process after use.

Disposed abrasive products should be damaged to prevent them from being taken from waste skips and re-used.

Leaflet supplied and endorsed by

www.fepa-abrasives.org www.abrasivessafety.com

IMPORTANT NOTICE: Every effort has been made to ensure that all information supplied in this leaflet is accurate and up to date. We cannot accept, however, responsibility for any error or omission, nor for any consequential loss or damage so arising (E & OE). © FEPA ISSUE June 2016


SAFETY RECOMMENDATIONS FOR THE USE OF ABRASIVE PRODUCTS

PASS ON THIS LEAFLET TO THOSE USING THE ABRASIVE PRODUCT



Abrasive products improperly used can be very dangerous. Always follow the instructions provided by the abrasive product and machine supplier. Ensure that the abrasive product is suitable for its intended use. Examine all abrasive

products for damage or defects before mounting. Follow the correct procedures for handling and storage of abrasive products.

Be aware of the hazards likely during the use of abrasive products and observe the recom-mended precautions to be taken:

Bodily contact with the abrasive product at operating speed Injury resulting from product breakage during use Grinding debris, sparks, fumes and dust generated by the grinding process Noise Vibration

Use only abrasive products conforming to the highest standards of safety. The following EN standards provide the essential safety requirements for relevant abrasives products:

EN 12413 for Bonded Abrasives EN 13236 for Superabrasives EN 13743 for Specific Coated Abrasives (vulcanised fibre discs, flap wheels, flap discs

and spindle-mounted flap wheels). Never use a machine that is not in good working order or one with defective parts. Employers should carry out a risk assessment on all individual abrasive processes to deter-mine the appropriate protective measures necessary. They should ensure that their employ-ees are suitably trained to carry out their duties. This leaflet is only intended to provide basic safety recommendations. For more detailed infor-mation on the safe use of abrasive products, reference to our comprehensive Safety Codes is strongly recommended. These are available from FEPA or your National Trade Association:

FEPA Safety Code for Bonded Abrasives and Precision Superabrasives FEPA Safety Code for Superabrasives for Stone and Construction FEPA Safety Code for Coated Abrasives

PRECAUTIONS AGAINST LIKELY HAZARDS Noise

Ear protection complying with EN352 is recommended for all applications where the workpiece or machine is hand-held, irrespective of the noise level.

Ensure that the correct abrasive product is selected. An unsuitable product can produce excessive noise.

Vibration

Processes where the workpiece or machine is hand-held can cause vibration injury. Action needs to be taken if tingling, pins and needles or numbness is experienced after

10 minutes continuous use of the abrasive product. The effects of vibration are more pronounced in cold conditions so keep the hands warm

and exercise hands and fingers regularly. Use modern equipment with low vibration lev-els.

Maintain all equipment in good condition and stop the machine and have it checked if excessive vibration occurs.

Use good quality abrasive products and keep them in good condition during their life. Maintain mounting flanges and back-up pads in good condition and replace if worn or

distorted. Do not grip the workpiece or machine too tightly and do not exert excessive pressure on

the abrasive product. Avoid continuous use of the abrasive product. Use the correct product. An unsuitable product can produce excessive vibration. Don't ignore the physical symptoms of vibration - seek medical advice.

DISPOSAL OF ABRASIVES

Used or defective abrasives should be disposed in accordance with local or national reg-ulations.

Further information can be obtained from Voluntary Product Information provided by the supplier.

Be aware that the abrasive product may be contaminated with material from the work-piece or process after use.

Disposed abrasive products should be damaged to prevent them from being taken from waste skips and re-used.


www.fepa-abrasives.org www.abrasivessafety.com

IMPORTANT NOTICE: Every effort has been made to ensure that all information supplied in this leaflet is accurate and up to date. We cannot accept, however, responsibility for any error or omission, nor for any consequential loss or damage so arising (E & OE). © FEPA ISSUE June 2016


Injury caused by product breakage (continued)

Ensure that the correct abrasive product is selected. Never use a product if it cannot be properly identified.

Follow the instructions provided by the abrasive product or machine supplier when mounting abrasive products. Observe any mounting indications marked on the product such as direction of run or mounting position.

Never force the abrasive product onto the mounting fixture or modify it to fit. Never exceed the maximum operating speed where specified. Check that the correct mounting devices are used and that they are undistorted, clean

and free from burrs. Use mounting blotters where supplied. Do not tighten the mounting device excessively. After mounting or re-mounting an abrasive product, conduct a trial run at operating

speed with the guard in place for at least 30 seconds, standing clear of the machine before use.

Never remove guards from machines where fitted and ensure they are in good condition and properly adjusted.

Ensure that the workpiece is secure and properly supported. Ensure that work rests are properly adjusted and secure.

Never start the machine with the workpiece in contact with the abrasive product. Never apply excessive force or shock to the abrasive product or let it overheat. Do not grind on the part of the product that is not designed for the operation. Avoid

grinding with the edge of abrasive belts, use the centre of the belt if possible. Avoid clogging and uneven wear to ensure that the abrasive product is working effi-

ciently. Dress frequently where appropriate. Let the abrasive product stop naturally, not by applying pressure to its surface. Turn off and spin out excess coolant before stopping the machine. Do not leave abrasive belts under tension when not in use.

Grinding debris - sparks, dust and fumes

Exposure to grinding debris can cause lung damage and other physical injuries. All dry grinding processes should be provided with adequate extraction facilities. Do not use abrasive products near flammable materials. The use of respirators complying with EN149 is recommended for dry grinding process-

es even if extraction systems are provided. Guards where provided should be adjusted to deflect sparks and debris away from the

operator. Take additional measures to protect people working nearby. Eye protection is recommended for all machine applications for abrasives. For hand-

held machines or workpiece, goggles or full-face shields with a minimum protection level of EN166 Grade B are recommended.

Ensure that the correct abrasive product is selected. An unsuitable product can produce excessive debris and dust.

PRECAUTIONS AGAINST LIKELY HAZARDS Bodily contact with the abrasive product

Always take great care and attention when using abrasive products. Tie back long hair and do not wear loose clothing, ties and jewellery.

Prevent accidental start-up of the machine before mounting or changing an abrasive product. Isolate machines from their power source where necessary.

Never remove guards from machines where fitted and ensure they are in good condition and properly adjusted before starting the machine.

Always use gloves and suitable clothing where the workpiece or machine is hand-held. For gloves, a minimum protection level of EN 388 Category 2 is recommended.

After switching off the machine, ensure the product has come to rest before leaving the machine unattended.

Injury caused by product breakage

Always handle abrasives with great care, they are easily damaged. Examine all products for defects or damage before use.

Store abrasives in dry, frost-free conditions avoiding wide variations in temperature. En-sure they are properly protected and supported to prevent damage and distortion.

Coated abrasives should be stored at 18-22º C, 45-65% relative humidity. Abrasive belts should be hung on a rod or peg not less than 50mm diameter. Never use an abrasive product beyond its expiry date where marked. Observe the rec-

ommended shelf life for the following specific products; Resinoid and Shellac products 3 years, Rubber products 5 years, Vitrified products 10 years.

Check abrasive product or package for any warnings or other safety information:

Not permitted for hand-held ma-chines - Only permitted for use on totally

enclosed machines

Not permitted for wet grinding Read the instructions

Not permitted for face grinding Wear eye protection

Do not use if damaged Wear hearing protection

Only permitted with a back-up pad Wear gloves

- Only permitted for wet cutting Wear a respirator


Injury caused by product breakage (continued)

Ensure that the correct abrasive product is selected. Never use a product if it cannot be properly identified.

Follow the instructions provided by the abrasive product or machine supplier when mounting abrasive products. Observe any mounting indications marked on the product such as direction of run or mounting position.

Never force the abrasive product onto the mounting fixture or modify it to fit. Never exceed the maximum operating speed where specified. Check that the correct mounting devices are used and that they are undistorted, clean

and free from burrs. Use mounting blotters where supplied. Do not tighten the mounting device excessively. After mounting or re-mounting an abrasive product, conduct a trial run at operating

speed with the guard in place for at least 30 seconds, standing clear of the machine before use.

Never remove guards from machines where fitted and ensure they are in good condition and properly adjusted.

Ensure that the workpiece is secure and properly supported. Ensure that work rests are properly adjusted and secure.

Never start the machine with the workpiece in contact with the abrasive product. Never apply excessive force or shock to the abrasive product or let it overheat. Do not grind on the part of the product that is not designed for the operation. Avoid

grinding with the edge of abrasive belts, use the centre of the belt if possible. Avoid clogging and uneven wear to ensure that the abrasive product is working effi-

ciently. Dress frequently where appropriate. Let the abrasive product stop naturally, not by applying pressure to its surface. Turn off and spin out excess coolant before stopping the machine. Do not leave abrasive belts under tension when not in use.

Grinding debris - sparks, dust and fumes

Exposure to grinding debris can cause lung damage and other physical injuries. All dry grinding processes should be provided with adequate extraction facilities. Do not use abrasive products near flammable materials. The use of respirators complying with EN149 is recommended for dry grinding process-

es even if extraction systems are provided. Guards where provided should be adjusted to deflect sparks and debris away from the

operator. Take additional measures to protect people working nearby. Eye protection is recommended for all machine applications for abrasives. For hand-

held machines or workpiece, goggles or full-face shields with a minimum protection level of EN166 Grade B are recommended.

Ensure that the correct abrasive product is selected. An unsuitable product can produce excessive debris and dust.

PRECAUTIONS AGAINST LIKELY HAZARDS Bodily contact with the abrasive product

Always take great care and attention when using abrasive products. Tie back long hair and do not wear loose clothing, ties and jewellery.

Prevent accidental start-up of the machine before mounting or changing an abrasive product. Isolate machines from their power source where necessary.

Never remove guards from machines where fitted and ensure they are in good condition and properly adjusted before starting the machine.

Always use gloves and suitable clothing where the workpiece or machine is hand-held. For gloves, a minimum protection level of EN 388 Category 2 is recommended.

After switching off the machine, ensure the product has come to rest before leaving the machine unattended.

Injury caused by product breakage

Always handle abrasives with great care, they are easily damaged. Examine all products for defects or damage before use.

Store abrasives in dry, frost-free conditions avoiding wide variations in temperature. En-sure they are properly protected and supported to prevent damage and distortion.

Coated abrasives should be stored at 18-22º C, 45-65% relative humidity. Abrasive belts should be hung on a rod or peg not less than 50mm diameter. Never use an abrasive product beyond its expiry date where marked. Observe the rec-

ommended shelf life for the following specific products; Resinoid and Shellac products 3 years, Rubber products 5 years, Vitrified products 10 years.

Check abrasive product or package for any warnings or other safety information:

Not permitted for hand-held ma-chines - Only permitted for use on totally

enclosed machines

Not permitted for wet grinding Read the instructions

Not permitted for face grinding Wear eye protection

Do not use if damaged Wear hearing protection

Only permitted with a back-up pad Wear gloves

- Only permitted for wet cutting Wear a respirator


SAFETY RECOMMENDATIONS FOR THE USE OF DIAMOND SAWS

ON ANGLE GRINDERS

PASS ON THIS LEAFLET TO THOSE USING DIAMOND SAWS



Diamond saws improperly used can be very dangerous. This leaflet focuses on diamond saws for angle grinders. It only covers straight cutting.This leaflet applies to diamond saws used on angle grinders (not petrol saws).

This leaflet applies to flat diamond saws: segmented and continuous rim.

IMPORTANT NOTICE: Every effort has been made to ensure that all information supplied in this leaflet is accurate and up to date. We cannot accept, however, responsibility for any error or omission, nor for any consequential loss or damage so arising (E & OE). © FEPA 2017


1 Restriction of use Name of manufacturer, supplier, importer, or Registered Trade Mark

6

2 Maximum operating speed Name of the supplier (producer, importer, or distributer) or a Registered Trade Mark. 7

3 Direction of rotation Maximum rotational frequency (rpm) 8

4 Dimensions (mm) Traceability code 9

5 Declaration of conformity Safety pictograms (PPE) Mandatory in France 10

Explanation of marking required by EN 13236 *

* EN 13236 marking shows that the producer has followed the essential safety re-quirements of the European safety standard for diamond saws in order to reduce the risks for the end-user. The markings from 1 to 9 listed above are mandatory for products marked EN 13236.

①

②

③

④

⑤

⑥ ⑦ ⑧

⑨

⑩

Flange Area

www.abrasivessafety.com www.fepa-abrasives-org


SAFETY RECOMMENDATIONS FOR THE USE OF DIAMOND SAWS

ON ANGLE GRINDERS

PASS ON THIS LEAFLET TO THOSE USING DIAMOND SAWS



Diamond saws improperly used can be very dangerous. This leaflet focuses on diamond saws for angle grinders. It only covers straight cutting.This leaflet applies to diamond saws used on angle grinders (not petrol saws).

This leaflet applies to flat diamond saws: segmented and continuous rim.

IMPORTANT NOTICE: Every effort has been made to ensure that all information supplied in this leaflet is accurate and up to date. We cannot accept, however, responsibility for any error or omission, nor for any consequential loss or damage so arising (E & OE). © FEPA 2017


1 Restriction of use Name of manufacturer, supplier, importer, or Registered Trade Mark

6

2 Maximum operating speed Name of the supplier (producer, importer, or distributer) or a Registered Trade Mark. 7

3 Direction of rotation Maximum rotational frequency (rpm) 8

4 Dimensions (mm) Traceability code 9

5 Declaration of conformity Safety pictograms (PPE) Mandatory in France 10

Explanation of marking required by EN 13236 *

* EN 13236 marking shows that the producer has followed the essential safety re-quirements of the European safety standard for diamond saws in order to reduce the risks for the end-user. The markings from 1 to 9 listed above are mandatory for products marked EN 13236.

①

②

③

④

⑤

⑥ ⑦ ⑧

⑨

⑩

Flange Area

www.abrasivessafety.com www.fepa-abrasives-org


DO’S DON’TS

1

Ensure the saw bears the mark EN 13236 Do not use a saw without EN 13236 mark

2

Always read the safety instructions Don’t throw away the instructions

before reading

3

Examine the saw for damage Never use damaged saws

Align flanges correctly Flanges incorrectly aligned 4

Observe direction of run Incorrect bore size - No direction of run

5

Ensure the guard is fitted Never remove the guard

DO’S DON’TS

Ensure work piece is secure Never cut an unstable work piece

6

Use protective equipment Never cut without protective equipment

7

Only use for cutting off Do not grind with a diamond saw

8

Always straight cutting Never twist in the cut

9

Let the saw cut freely Never force the cut

10


DO’S DON’TS

1

Ensure the saw bears the mark EN 13236 Do not use a saw without EN 13236 mark

2

Always read the safety instructions Don’t throw away the instructions

before reading

3

Examine the saw for damage Never use damaged saws

Align flanges correctly Flanges incorrectly aligned 4

Observe direction of run Incorrect bore size - No direction of run

5

Ensure the guard is fitted Never remove the guard

DO’S DON’TS

Ensure work piece is secure Never cut an unstable work piece

6

Use protective equipment Never cut without protective equipment

7

Only use for cutting off Do not grind with a diamond saw

8

Always straight cutting Never twist in the cut

9

Let the saw cut freely Never force the cut

10


List of Article Numbers

KGS Art. Nr. Page KGS Art. Nr. Page KGS Art. Nr. Page

0.2015.basic 50 3023.20781 21 4023.00319 37

0.2015.profi 47 3023.20782 21 4023.00320 37

0.2017.F&N 48 3023.20783 21 4023.00322 37

0.2017.B&S 49 3023.30253 38 4023.00337 39

1041.0100011 43 3023.30254 38 4023.00338 39

1041.0100012 43 3023.30255 38 4023.00339 39

1041.0100013 43 3023.30256 38 4023.00340 39

1041.0100014 43 3023.30257 38 4023.00341 39

1041.0100025 43 3023.30258 38 4023.00342 39

1041.0100026 43 3023.30259 38 4023.00343 39

1041.0100027 43 3023.30260 38 4023.00336 39

1041.0200011 44 3023.30261 38 4023.00362 41

1041.0200012 44 3102.20230 23 4023.00363 41

1041.0200013 44 3102.20231 23 4023.00364 41

1041.0200014 44 3102.20232 23 4023.00365 41

1041.0200025 44 3102.20233 23 4023.00366 41

1041.0200026 44 3102.20234 22 4023.00367 41

1041.0200027 44 3102.20235 22 4023.00368 41

1042.0201311 40 3102.20236 22 4023.00404 39

1042.0201312 40 3102.20237 22 4023.00405 39

1042.0201313 40 3191.90001 34 4023.00406 39

1042.0201314 40 3191.90002 34 4023.00407 39

1042.0201325 40 3191.90003 34 4023.00408 39

1042.0201326 40 3191.90004 34 4023.00409 39

1042.0201327 40 3191.90005 34 4023.00410 39

1042.0202111 40 3191.90006 34 4023.00453 41

1042.0202112 40 3191.90007 34 4023.00454 39

1042.0202113 40 3191.90008 34 4024.00001 31

1042.0202114 40 3191.90009 34 4024.00006 31

1042.0202125 40 3191.90010 34 4024.00007 31

1042.0202126 40 3191.90011 34 4024.00008 32

1042.0202127 40 3191.90012 34 4024.00009 32

1044.0201512 45 4023.00314 37 4024.00010 32

1044.0201513 45 4023.00315 37 4024.00012 32

1044.0201514 45 4023.00316 37 4024.00102 31

1044.0205313 45 4023.00317 37 4024.00103 31

3023.20780 21 4023.00318 37 4024.00104 31


List of Article Numbers

KGS Art. Nr. Page KGS Art. Nr. Page KGS Art. Nr. Page

4211.01441 33 8102.10080 25 8950.10003 56

4211.01442 33 8102.10081 25 8950.10006 59

4211.01443 33 8102.10090 27 8950.10009 60

4211.01444 33 8102.10091 27 8950.10011 60

4211.01445 33 8102.10101 25 8950.10013 63

4211.01446 33 8102.10150 24 8950.10014 62

4211.01447 33 8102.10151 24 8950.10015 58

4211.01448 33 8102.10154 24 8950.10018 57

4211.01449 33 8102.10190 27 8950.10020 61

4211.01450 33 8102.20001 29 8950.10100 64

4211.01451 33 8102.20010 30 8950.10101 64

4211.01452 33 8102.20020 29 8950.10102 64

4211.01453 33 8102.20021 29 8950.10103 64

4211.01454 33 8102.20022 29

4211.01455 33 8102.20024 29

4211.01456 33 8801.00001 69

4211.01457 33 8801.00009 70

4211.01458 33 8801.00017 70

4211.01459 33 8851.00422 73

4211.01460 33 8851.00423 73

4211.01463 33 8851.00424 73

4211.01464 33 8851.00425 73

4211.01465 33 8851.00427 74

4211.01466 33 8851.00428 74

4211.01467 33 8851.00429 74

4211.01468 33 8851.00430 74

4211.01469 33 8851.10005 74

4211.01470 33 8851.10013 74

4211.01471 33 8851.10016 74

4211.01472 33 8851.10018 74

8102.10050 24 8851.10029 73

8102.10051 24 8851.10033 73

8102.10052 24 8851.90035 73

8102.10054 24 8851.90100 73

8102.10060 26 8851.90101 73

8102.10061 26 8950.10000 54

8102.10064 26 8950.10001 55


Index

Chapter Details Page

A History of Innovation 2

Technology driven company 3

History, Sales offices, Manufacturing sites 3

Introduction 4

Index Applications and Products 5

Diamond Abrasives for Construction Materials Target applications and examples 6

KGS DIAMOND Innovationen

Electroplated Diamond Tools 7-8

Flexible Diamond Tools 7-8

Resin Bonded Diamond Tools 7-8

Product Specifications and ConstructionKGS Color Code System 9

Metal- and Resin Bonded Diamond Tools 9

Dry and Wet Grinding in Stone Processing Advantages and Disadvantages of Dry and Wet Grinding 10

Grits and Appearances of Surfaces Heavy grinding, Grinding, Smoothing, Semi-polish 11

Quality Grades for Construction Materials Gold Line, Silver Line 12

Product Performance Graphs Overview: Positioning of products 13

Materials and Areas of ApplicationDescription and Areas of Application for Stone categories; Hard Stone, Soft Stone, Ceramic, Engineered Stone, Concrete

14-15

Description of Common KGS Grinding Patterns and Geometries

Listed in Dry and/or Wet grinding 16

KGS Toolmatrix - Quick Product Finder Find your product in 4 steps 18-19

KGS DIAMOND Products

ANGLE GRINDER – CUTTING / GRINDING KGS Swiflex® Cobra 2.0 Cutting/Grinding Disc 21

ANGLE GRINDER – CUTTING KGS RED™ K936, K935, K810, K818, K819, K822, K835 22-27

ANGLE GRINDER – GRINDING KGS RED™ K898, K878 29-30

ANGLE GRINDER – GRINDING Stock Removal, (Heavy) Grinding, Smoothing

KGS Hybrid® Diamond Flap Discs 31-32

ANGLE GRINDER – GRINDING Stock Removal, (Heavy) Grinding

KGS Semi-flexible Grinding Disc SIC 33

HANDHELD MACHINES Diamond Sculpting Tools 34

ANGLE GRINDER – POLISHING KGS Swiflex® XX Diamond Polishing Disc 37

ANGLE GRINDER – POLISHING KGS Hybrid® PRO Diamond Polishing Disc 38

ANGLE GRINDER – POLISHING KGS Swiflex® CX Diamond Polishing Disc 39

ANGLE GRINDER – POLISHING KGS Flexis® Delta Diamond Polishing Pad 40

ANGLE GRINDER – POLISHING KGS Speedline® CM Diamond Polishing Disc 41


Index

Chapter Details Page

HAND GRINDING / MANUAL GRINDING Diamond Handpad Telum® / Flexis® 43-44

HAND GRINDING / SHARPENING Diamond Whetstone 45

Cutting, Grinding & Polishing KGS Toolkit

Construction “Profi”, 19-piece 46-47

"Tile & Natural Stone", 21-piece 48

"Building & Renovation", 24-piece 49

Construction “Basic”, 9 pieces 50

Chemicals Stone Care Program, Application Recommendations 52-53

Cleaner K12 Multicleaner 54

Cleaner K14 Deep Cleaning 55

Cleaner K17 Rust Clean 56

Cleaner K19 Cement Film Remover 57

Cleaner K35 Nano Cream 58

Cleaner K36 Wipe & Gloss 59

Protecting K20 Zip & Shine 60

Protecting K21 Platinum Solvent 61

Protecting K26 Stone Seal 62

Protecting K28 Stain Guard 63

Stone Care SetsStone Care Set – Granite, Engineered Stone, Ceramic, Universal

64

Quick Finder Stone Care Program Overview Stone Care Program 65

pH Value Information / Tabel 66

Treatment / Stone Care Program Treatment and Safety Instructions 67

Machines Handheld Machines 68-71

Accessories Back-up pads 72-75

Marketing, Service and Sales SupportWall shelf and counter displays, Product Training, KGS Techcenter Elburg

76-77

REVOLUTIONS TABLE 78

Safety Recommendations 80-87

List of Article Numbers 88-89

Index 90-91

KGS Catalogues 92

Notes 93

Contacts KGS DIAMOND Group 94

Swiss Diamond Technology®








Innovators since 1952 WWW.KGSDIAMOND.COM

Construction Diamond tools

EN

Grinding/polishing Special tools

Drilling

Segmented grinding

Cutting Dry Cutting

Euro 2017v1









Innovators since 1952 www.kgs.swiss/marble

Drilling

Shaping

Polishing

Milling

Accessories

Cutting

Diamond Tools

MARBLE

ENX0184-2017v1

Euro










Diamond Tools

CERAMIC

Drilling Polishing

Milling

Accessories

Cutting Shaping

www.kgsdiamond.com

ENX0185-2017v1

Euro









Innovators since 1952 www.kgsdiamond.com

ENX0184-2017v1

ENGINEEREDSTONE

Diamond Tools

Drilling

Shaping

Polishing

Milling

Accessories

Cutting

Euro









Innovators since 1952 www.kgs.swiss/glass

GLASSFlexible Diamond Tools

Fine Finishing

Power Tool Arrissing

Flat Lapping Hand Edging

Automatic Seaming Corner Dubbing









Innovators since 1952 www.kgsdiamond.com

ENX0183-2017v1

Drilling

Shaping

Polishing

Milling

Accessories

Cutting

Diamond Tools

GRANITE

Euro









Innovators since 1952 www.kgs.swiss/porcelain

MaintenanceSpot-repairSpot-repair

Disc PolishingRotary PolishingLinear Polishing

Flexible Diamond Tools

PORCELAIN


All prices in this catalogue exclude VAT. All images are ©2017 KGS DIAMOND GROUP. Unauthorized reprinting and/or copying by whatever means and even in part, are prohibited. Disclaimer: despite the fact that this catalogue has been made with the utmost care, KGS can not be held responsible for any errors regarding pricing and/or information in this catalogue. All our offers, orders and deliveries are subject to our General Terms and Conditions. These can be received on request, please contact us at [email protected] or +31 525 68 33 00.

KGS CATALOGUES

RED™ Catalogue

Eng. Stone Catalogue

Glass Catalogue

Marble Catalogue

Granite Catalogue

Ceramic Catalogue

Porcelain Catalogue

For other KGS Catalogues please contact us:

+31 525 68 33 00 or per email

[email protected]


KGS DIAMOND WorldwideNOTES

EUROPE

Head Office: International Sales Office:KGS DIAMOND GROUP S.A. KGS DIAMOND INTERNATIONAL KGS WINTER GmbHChâtel-St-Denis, Switzerland Elburg, The Netherlands Dortmund, GermanyT +41 21 967 00 00 T +31 525 683 300 T +49 231 9 67 87 [email protected] [email protected] [email protected]

KGS DIAMOND NEDERLAND B.V. KGS DIAMOND FRANCE S.A.S. KGS DIAMOND PORTUGAL Lda.Elburg, The Netherlands Quetigny, France Viana do Castelo, PortugalT +31 525 685 500 T +33 3 80 49 76 65 T +351 258 735 [email protected] [email protected] [email protected]

KGS DIAMOND ESPAÑA S.L. KGS DIAMOND UK LTD KGS DIAMOND HUNGARY Kft.Barcelona, Spain Kent, United Kingdom Budapest, HungaryT +34 617 841 259 T +44 1580 211 975 T +36 1 347 80 [email protected] [email protected] [email protected]

AMERICAS

Sales Office, Service and Distribution Center:KGS DIAMOND U.S.A. Inc.Columbia, United States of AmericaT +1 [email protected]

ASIA / MIDDLE-EAST / AFRICA / AUSTRALIA

Head Office: Service Center for the Middle East:

THE FERRONATO KGS HOLDING LTDKGS DIAMOND TOOLS General Trading LLC

KGS DIAMOND TOOLSPrivate LTD

Dubai, United Arab Emirates Dubai, United Arab Emirates Bangalore, IndiaT +971 43 99 11 22 T +971 43 99 11 22 T +971 80 95 51 45 [email protected] [email protected] [email protected]

KGS DIAMOND GUANGZHOU Ltd KGS DIAMOND HONG KONG LLC. KGS DIAMOND AUSTRALASIA PTY. LtdGuangzhou, China Hong Kong, China Sydney, AustraliaT +86 20 3758 5369 T +86 20 3758 5369 T +61 498 999 [email protected] [email protected] [email protected]

KGS DIAMOND SINGAPORE PTE. LTD.Singapore, SingaporeT +65 6692 [email protected]

X0218, Nov 2018

Documents

ABRASIVES FOR - KGS DIAMOND