100119_MN5000_s

8/10/2019 100119_MN5000_s

1/2

Hardware Redundancy

Dimensions (H x W x D mm)

Weight

Temperature

Humidity (non-condensing)Power Supply

Maximum Power Consumption

PRODUCT SPECIFICATIONS SUMMARY

2009 NEC Corporation NEC and the NEC logo are registered trademarks of NEC Corporation.

For inquiries, contact

URLhttp://www.nec.com/

Cat.No. F02-10010004E

MPLS-TP FEATURES TIMING / SYNCHRONIZATION

NETWORK PROTECTION

NETWORK MANAGEMENT

STANDARDS & RECOMMENDATIONS

Packet Processing Capacity

Maximum ports per chassis

44Gbps full duplex switching

GE/FE x 22

ATM/SDH STM-1 x 2

E1/T1 x 16 (48 future release)

POS STM-1 x 2

10GE x 2 (future release)


10GE x 4, GE x 40, FE x 24

ATM/SDH STM-1 x 8

E1/T1 x 16

POS STM-64/STM-16/STM-1 x 4


10GE x 6, GE/FE x 36

ATM/SDH STM-1 x 64

E1/T1 x 64

POS STM-64/STM-16/STM-1 x 6

Product MN5100 MN5200 MN5300

The company names and product names given in this catalog are trademarks or registered trademarks of the respective companies.

The configuration or specifications are subject to change without prior notice due to continual improvements.

Before installing, connection or using this product, be sure to carefully read and observe the cautionaryand prohibited matters provided in the instruction manual.

Safety Precautions!

FE/GE/10GE: Sync. Ethernet, 1588v2, Line timing and SSM

(control frame) transmission

POS: Line timing and SSM (S1 byte) transmission

Free run: 4.6ppm (ITU G.813)

Holdover: 0.05ppm (Better than ITU G.813) within 24h

Sync signal for 3G Base Station: External timing output

Traceable STM-1 ATM interface as line timing source

Provide 1pps+tod time input and output (MN5100)

RFC 3031, 3916, 3985, 4197, 4553, 4842, 4717, 4816, 4448

ITU-T G.8110, G. 8110.1, Y.1711, Y.1720, Y.1731

IEEE 1588v2, 802.1ag, 802.3ah

SpectralWave MN9200, LCT (Local Craft Terminal)

1+1 Linear MSP (G.841 Annex B) for STM-1 (ATM/SDH)

1:1 Linear MSP for STM-1 (ATM/SDH)

1+1 and 1:1 Linear protection for LSP

Ring protection (future release)

Power input

44.5 x 440 x 245 (1U)

4kg (full)

0to 50

5% to 95%

50W (fully loaded)

133 x 440 x 410 (3U)

21kg (full)

-48V DC

300W (fully loaded)

320 x 440 x 410 (7U)

41kg (full)

700W (fully loaded)

Power unit, OAM/Clock/Switch fabric, E1/T1 card protection

5to 40

5% to 85%

Published by NEC Corporation Global Network Division

MN5100

PACKET TRANSPORT NETWORK SOLUTION

http://www.nec.com/

MPLS-TP

PACKET TRANSPORT SOLUTION

FOR MULTI-SERVICES

8K MPLS label per MN5200/MN5300, 4K per MN5100.

E-LSP and L-LSP support

Per platform Label space support

Bi-directional and Uni-directional MPLS-TP trail

DiffServ support

2 service levels for TDM (E1/T1, SDH/SONET),

4 service levels for ATM,

8 service levels for Ethernet

MPLS OAM including protection switching

VCCV, LSP Ping/TraceRoute

EMS/SNMS manual control of PW/LSP setup/release

MN5000-series

MN5000-series

MN5200 MN5300

8/10/2019 100119_MN5000_s

2/2

NETWORK MANAGEMENT

The MN5000 is a new packet transport product based on pseudowire

over MPLS-TP technology; it has been developed to overcome the

data traffic consuming at most carriers bandwidth in current

SDH/SONET based infrastructure. As a convergence transport tech-

nology, the MN5000 is the key fact for todays metro network carriers

and services providers. Equipped with enhanced data service

processing capability and powerful network management function,

the MN5000 can provide all-round network solutions at the access

layer and aggregation layer of a Metropolitan Area Network (MAN),

enormously reducing the operation cost. Operation cost is optimized

by both MN5000 and MN9200 because of simple and easy OAM of

Packet Transport Network.

The MN9200 is a comprehensive Network Management System for

operating the MN5000, and features an integrated broad set of func-

tions ready for the growing demands on packet transport system, and

provides an integrated network management visibility and control of

various customers network and/or regions on a sophisticated graphi-

cal user interface (GUI); designed specifically to incorporate the most

required features and best practices of the leading telecommunica-

tion carriers, the GUI is user friendly, simple and practical. The

MN9200 continuously evolves to support the state of the art on man-

agement capabilities, meeting all the customer needs on packet trans-

port network.

The MN9200 provides all necessary serv ice configuration tools of

LAN / WAN / ATM / PDH connection establishment.

The LSPs/PWs (path) can be easily created from A to Z and/or discov-

ered at the network through a state-of-the-art search mechanism,

allowing the operator to easy introduce and manage the services avail-

ability on the network.

The MN9200 supports performance monitoring for ATM, PDH, SDH,

Ethernet, Pseudowire and LSP, and also supports Graphical PM

report and browsing manually and automatically.

The MN9200 supports advanced alarm monitoring functions such as

Current Alarm Monitoring, History Alarm Statistics, LSP/PW/CE

Service alarm, Network Equipment (NE)/Board/Port alarm, Communi-

cation alarm, Clock alarm, External Environment alarm, and so on.

The MN9200 supports powerful QoS provisioning mechanism. It is

possible to create a guaranteed connection by each individual service

type within its corresponding layer (LSP, PW and CE).

In despite of its End-to-End (E2E) services QoS provisioning, the

operator can manage each equipment individually for its serv ices,

units and ports for implementation and/or troubleshooting.

The MN5000 suits for Metro Ethernet service, Mobile Backhaul,

DSLAM & xPON Aggregation, SDH network migration, and so on.

The MN5000 supports Ethernet over MPLS, Circuit emulation over

MPLS and ATM over MPLS, and can carries TDM, ATM and Data

traffic through managed path, over Pseudowire and LSP layer in

MPLS-TP network. ATM IMA is planned.

T he MN5000 suppo r t s s t ro ng OAM fe a t u re s ; MPLS-OAM,

Pseudowire OAM, SDH OAM, ATM OAM, and Ethernet OAM, useful

for connectivity verification, fast failure detection, tracing and so on.

Co-existence with SDH Network

Interoperability with existing IP/MPLS core

MPLS and Carrier Ethernet based QoS

Residential and Enterprise traffic can co-exist while guaranteeing

the SLAs.

SOLUTIONS EXAMPLE

PRODUCT OVERVIEW

KEY BENEFITS

APPLICATIONS

MN5000 KEY FEATURES

All the services come from single network

State art pure-packet architecture

Cost Effective Network

The MN5000 can bring in fo llowing key benefits.

Ease of Operation

New Revenue Generating Services

Multi-services transport with path management

Operation and Maintenance (OAM) Features

The MN5000 supports high speed protection less than 50ms. It

ensures carrier grade continuous services.

Network Protection

Key Functions of Management,

Operation and Maintenance

The MN5000 supports high performance Synchronization Distribution

over packet transport network, suits for mobile backhaul and so on.

Timing Synchronization

Quality of Services

Mobile Backhaul Solution Metro Ethernet Solution

QoS Provisioning

Service Configuration and LSP/PW (Path) Provisioning

Performance Monitoring

Fault and Alarm Monitoring

Guaranteed SLAs

Smooth Migration

User friendly GUI for all the standard operation

Minimal training of personnel, reuse of existing skill-set

Simple Architecture (Connection oriented, Deterministic data plane)

Static provisioning (plan for dynamic provisioning)

Standards based enhanced OAM (Advanced troubleshooting)

Powerful network management with End-to-End provisioning

(Hides the complexity of MPLS protocol)

Separated Control-plane and User-plane

(Network stability behavior advantage)

MEF 9 and 14 certified

Enables new enterprise services such as VPL, EVPL, TLS, and so on

Quick creation and activation of new services

Supports VLAN and Multicast

Smooth and cost-effective migration from 2G to 3G

Advanced QoS for E2E connection and protection (

Documents

100119_MN5000_s