1:3 Scale Samurai Sword (Miyamoto Musashi)

7/26/2019 1:3 Scale Samurai Sword (Miyamoto Musashi)

1/33

View Full Version: 1/3 Samurai Sword (miyamoto Musashi)

ScaleModelsMalaysia> Others in-Progress builds> 1/3 Samurai Sword (miyamoto Musashi)

Title:1/3 Samurai Sword (miyamoto Musashi)

Entau- December 1, 2009 07:39 AM (GMT)

Something different this time :lol:

thanks rayloke for getting this kit for me in HK, :P

but once i open it, was a bit dissapointed, this kit was badly mold, lots of flash, sink hole, and other imperfection, and i 've

been sanding this kit for almost 2 weeks :blood25ij:

THe BASE

Create your own social network with a free forum.

Learn MoreLearn More Register NowRegister Now


2/33


3/33

as you can see, i need to fill all the holes and gaps, and even remove the ornament pattern on the side because its badly

mold.

THE KATANA

all the parts for the katana, the wakizaki also consist the same amount of parts, only smaller


4/33

the double ring tsuba, very deep sink mark, and lots of sanding


5/33

extended the bottom, cause its too short compare to the real one


6/33


7/33

before and after sanding, now i know why its so difficult to polish/shape a katana :P


8/33

the kogatana (little knife) to be insert at the saya (scabbard)


9/33

test fitting everything for any miss allignment

The Chrome

I'm using Mr Color Metalizer Aluminium


10/33

I'm doing it using drybrushing, no Airbrush was use at all, and not event on black basecoat


11/33

ok, first i wetsand the spoon with 1000, then mask the hamon (wave pattern) and compound with tamiya compound coarse,


12/33

then tamiya fine compound, after that apply mr color aluminium using dry brush, about 4 layer

as you can see the top are just 1000 wetsand, so the reflection are blurred, while the bottom are much smoother, and this is


13/33

just drybrushing on WHITE plastic and then BUFF till shine, IMO the outcome should be better and gloss black surface

cons: can't touch with bare hand, easily scrub off, can't be topcoat or decal

pros: can be touch up using drybrushing and buff again, all done in 15min

here's the full tutorial:

http://www.essmc.org.au/Natural_Metal_Finish.html

(Thanks squealus for the fantastic link :D )

kuman- December 1, 2009 08:21 AM (GMT)

this will be an awesome showpiece indeed...

and thanks for the link..

kuman :D

beachbum- December 2, 2009 03:13 AM (GMT)

Fascinating. Well done thus far Entau. Pity the kit had so much repairs to be done and I wonder why the blade did not just

come chromed. At 1/3th I can understand why you suffered from the sanding. On the positive side you probably managed

to buildup some extra muscles on your forearms & fingers after the workout. :)

Looking forward to seeing more progress pics especially since I like all pointy and sharp things. :P

Entau- December 2, 2009 03:34 AM (GMT)

thanks kuman & beachbum ^_^

almost all part was come in chrome and gold, but because most of the parts were badly mold (sink mark, flash, mold line,

nip mark, bubbles), i've to sand the entire thing, so the chrome was useless, stripping is definitely a must :lol:

Entau- March 9, 2010 11:55 AM (GMT)

test again the dry brushing technique on a BLACK plastic knife, result was better than WHITE spoon, but still easily scrub

off, and its not as SHINEY as the real knife.


14/33

picture above looks close but in reality the difference is HUGE, the real knife is on bottom

maybe i should try this:

http://www.automotiveforums.com/vbulletin/...ad.php?t=979823

wuichong- March 9, 2010 12:11 PM (GMT)

QUOTE(Entau @ Mar 9 2010, 07:55 PM)

test again the dry brushing technique on a BLACK plastic knife, result was better than WHITE spoon, but still easilyscrub off, and its not as SHINEY as the real knife.


15/33

picture above looks close but in reality the difference is HUGE, the real knife is on bottom

maybe i should try this:

http://www.automotiveforums.com/vbulletin/...ad.php?t=979823

From this picture without words, I think both are real knife.

wuichong- March 9, 2010 12:15 PM (GMT)Black plastics as base colour looks better thans white plastic spoon.

Entau- January 11, 2011 04:09 AM (GMT)

Parts ready to be prime


16/33

and reveal some areas that need to be touch up


17/33

so putty time...


18/33

Prime 2nd round, and test fit, some area actually still not perfect, but after test fit i realize they are not so visible after all,

so i can start painting veli soon :lol:

Blade close up


19/33

Katanas

Cover's on


20/33


21/33

Helvetican- January 12, 2011 03:42 AM (GMT)

Very sharp looking build there bro and as informative as ever.

few appreciate the effort in posting pix, so thank you.

looking forward to seeing it done.


thanks bro, i couldn't find a single pics of the doyusha sword useable for my reference, so i think it's nice to share the

process, picture tells a thousand words :lol:


22/33


Painted some of the parts black base, but since i was cheapskate, i mixed leftover & unused colors :lol:

mixture of mr color super black & metallic black

then dry brushing using mr metalizer dark iron


23/33

use a very rough brush, dun use nice & soft brush, just dip a bit of paint and remove excess paint with tissue paper until left

like 5%

here's the result, IMO very easy to overdone, mean only sees dark iron and no black patches :lol:


24/33


The Tsuba was mist spray several times with semigloss black to get some texture on it, then dry brush with mr metalizer

iron


25/33

This one is mr metalizer brass

base painted with GAIA flat black, lazy to do gloss coz i duwan to waste time compound :P


26/33

base completed


27/33

some crack, :lol: but dun k ready, just wanna finish it :P


28/33

the saya (scabbard) painted with GAIA gloss black

koowilliams- January 17, 2011 04:29 AM (GMT)

have a feeling that it will look better than the box art...


koo, the boxart look like pasar malam toy sword :lol:

okay, this is the crack i posted before


29/33

put some superglue on the crack

carefully sand off with 600 & 800 grit


30/33

done, not perfect...but u can tell i dun really k :P

drybrush the kogatanas with aluminium metalizer, then buff again with the black chrome powder, not really what i what,

might redo this


31/33

2000 wetsand and then polished the saya (scabbard) with tamiya coarse & fine compound, the top is without polish

the reflection is much sharper & clearer :lol:

Entau- May 17, 2011 03:56 AM (GMT)

okay, final updates....

rubbed the sword with the chrome powder...still thinking of adding the 'wave' effect, but not sure how yet :P


32/33


33/33

hopefully can finish everything by this week :lol:

kuman- May 17, 2011 04:36 AM (GMT)

wah.. so shiny..

bring this to SMM 2011?

kuman :)

sky_tokyodrifter- May 17, 2011 04:52 AM (GMT)

this is really nice man :o i have to try to build me self one of these katanas.

Make the handle a bit "used" effect to give that antique look then people will believe its real.

I think you can achieve the wave blade pattern but not sure at this stage because it was suppose to be done before using the

chrome powder. For the blades you use super clear so that it shines like hell like what you did and for the blade wave, usesemi clear as base coat so that when you apply the chrome powder, it does not reflect that much to the wavy areas giving a

boundary of bling bling chrome and non bling wavy chrome. Test it on a spoon ^_^

Entau- May 17, 2011 05:53 AM (GMT)

no problem, the powder can be remove using water & soap, then just buff again :P

kuman, i'll try..but i had no idea this built belongs to which category :lol: :lol:

* Hosted for free by InvisionFree

Create your own social network with a free forum.

Learn MoreLearn More Regis ter for FreeRegister for Free

Documents

1:3 Scale Samurai Sword (Miyamoto Musashi)