156-215.77 checkpoint - GRATIS EXAM · PDF file156-215.77 checkpoint Number : 156-215.77 Passing Score : 800 ... - Configure the GAiA back up utility to back up the Security Gateways

http://www.gratisexam.com/

156-215.77 checkpoint

Number: 156-215.77Passing Score: 800Time Limit: 120 min


Sections1. Volume A2. Volume B3. Volume C4. Volume D


Exam A

QUESTION 1You manage a global network extending from your base in Chicago to Tokyo, Calcutta and Dallas. Management wants a report detailing the current software levelof each Enterprise class Security Gateway. You plan to take the opportunity to create a proposal outline, listing the most cost-effective way to upgrade yourGateways. Which two SmartConsole applications will you use to create this report and outline?

A. SmartView Tracker and SmartView MonitorB. SmartLSM and SmartUpdateC. SmartDashboard and SmartView TrackerD. SmartView Monitor and SmartUpdate

Correct Answer: DSection: Volume AExplanation

Explanation/Reference:

QUESTION 2You have two rules, ten users, and two user groups in a Security Policy. You create database version 1 for this configuration. You then delete two existing users andadd a new user group. You modify one rule and add two new rules to the Rule Base. You save the Security Policy and create database version 2. After awhile, youdecide to roll back to version 1 to use the Rule Base, but you want to keep your user database. How can you do this?

A. Run fwm dbexport -l filename. Restore the database. Then, run fwm dbimport -l filename to import the users.B. Run fwm_dbexport to export the user database. Select restore the entire database in the Database Revision screen. Then, run fwm_dbimport.C. Restore the entire database, except the user database, and then create the new user and user group.D. Restore the entire database, except the user database.



QUESTION 3Which feature or command provides the easiest path for Security Administrators to revert to earlier versions of the same Security Policy and objects configuration?


A. Database Revision ControlB. Policy Package managementC. dbexport/dbimportD. upgrade_export/upgrade_import

Correct Answer: ASection: Volume AExplanation


QUESTION 4Your Security Management Server fails and does not reboot. One of your remote Security Gateways managed by the Security Management Server reboots. Whatoccurs with the remote Gateway after reboot?


A. Since the Security Management Server is not available, the remote Gateway cannot fetch the Security Policy. Therefore, all traffic is allowed through theGateway.

B. Since the Security Management Server is not available, the remote Gateway cannot fetch the Security Policy. Therefore, no traffic is allowed through theGateway.

C. The remote Gateway fetches the last installed Security Policy locally and passes traffic normally. The Gateway will log locally, since the Security ManagementServer is not available.

D. Since the Security Management Server is not available, the remote Gateway uses the local Security Policy, but does not log traffic.

Correct Answer: CSection: Volume AExplanation



QUESTION 5What must a Security Administrator do to comply with a management requirement to log all traffic accepted through the perimeter Security Gateway?

A. In Global Properties > Reporting Tools check the box Enable tracking all rules (including rules marked as None in the Track column). Send these logs to asecondary log server for a complete logging history. Use your normal log server for standard logging for troubleshooting.

B. Install the View Implicit Rules package using SmartUpdate.C. Define two log servers on the R77 Gateway object. Enable Log Implied Rules on the first log server. Enable Log Rule Base on the second log server. Use

SmartReporter to merge the two log server records into the same database for HIPPA log audits.D. Check the Log Implied Rules Globally box on the R77 Gateway object.



QUESTION 6Which utility allows you to configure the DHCP service on GAiA from the command line?

A. ifconfigB. sysconfigC. cpconfigD. dhcp_cfg

Correct Answer: BSection: Volume AExplanation


QUESTION 7The third-shift Administrator was updating Security Management Server access settings in Global Properties and testing. He managed to lock himself out of hisaccount. How can you unlock this account?

A. Type fwm unlock_admin from the Security Management Server command line.B. Type fwm unlock_admin -u from the Security Gateway command line.C. Type fwm lock_admin -u <account name> from the Security Management Server command line.


D. Delete the file admin.lock in the Security Management Server directory $FWDIR/tmp/.



QUESTION 8The third-shift Administrator was updating Security Management Server access settings in Global Properties. He managed to lock all administrators out of theiraccounts. How should you unlock these accounts?

A. Delete the file admin.lock in the Security Management Server directory $FWDIR/tmp/.B. Reinstall the Security Management Server and restore using upgrade_import.C. Type fwm lock_admin -ua from the Security Management Server command line.D. Login to SmartDashboard as the special cpconfig_admin user account; right-click on each administrator object and select unlock.



QUESTION 9You are the Security Administrator for ABC-Corp. A Check Point Firewall is installed and in use on GAiA. You are concerned that the system might not be retainingyour entries for the interfaces and routing configuration. You would like to verify your entries in the corresponding file(s) on GAiA. Where can you view them? Givethe BEST answer.

A. /etc/sysconfig/netconf.CB. /etc/conf/route.CC. /etc/sysconfig/network-scripts/ifcfg-ethxD. /etc/sysconfig/network




QUESTION 10When using GAiA, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the oldMAC address should be active. How do you configure this change?

As expert user, issue these commands:

A. Edit the file /etc/sysconfig/netconf.C and put the new MAC address in the fieldB. As expert user, issue the command:C. # IP link set eth0 addr 00:0C:29:12:34:56D. Open the WebUI, select Network > Connections > eth0. Place the new MAC address in the field Physical Address, and press Apply to save the settings.



QUESTION 11Several Security Policies can be used for different installation targets. The Firewall protecting Human Resources' servers should have its own Policy Package.These rules must be installed on this machine and not on the Internet Firewall. How can this be accomplished?

A. A Rule Base is always installed on all possible targets. The rules to be installed on a Firewall are defined by the selection in the Rule Base row Install On.B. When selecting the correct Firewall in each line of the Rule Base row Install On, only this Firewall is shown in the list of possible installation targets after

selecting Policy > Install on Target.C. In the menu of SmartDashboard, go to Policy > Policy Installation Targets and select the correct firewall via Specific Targets.D. A Rule Base can always be installed on any Check Point Firewall object. It is necessary to select the appropriate target directly after selecting Policy > Install on


Target.



QUESTION 12You have a diskless appliance platform. How do you keep swap file wear to a minimum?


A. Issue FW-1 bases its package structure on the Security Management Server, dynamically loading when the firewall is booted.B. The external PCMCIA-based flash extension has the swap file mapped to it, allowing easy replacement.C. Use PRAM flash devices, eliminating the longevity.D. A RAM drive reduces the swap file thrashing which causes fast wear on the device.



QUESTION 13Your R77 primary Security Management Server is installed on GAiA. You plan to schedule the Security Management Server to run fw logswitch automatically every48 hours. How do you create this schedule?

A. On a GAiA Security Management Server, this can only be accomplished by configuring the command fw logswitch via the cron utility.B. Create a time object, and add 48 hours as the interval. Open the primary Security Management Server object's Logs and Masters window, enable Schedule log

switch, and select the Time object.


C. Create a time object, and add 48 hours as the interval. Open the Security Gateway object's Logs and Masters window, enable Schedule log switch, and selectthe Time object.

D. Create a time object, and add 48 hours as the interval. Select that time object's Global Properties > Logs and Masters window, to schedule a logswitch.



QUESTION 14Which of the following methods will provide the most complete backup of an R77 configuration?

A. Policy Package ManagementB. Copying the directories $FWDIR\conf and $CPDIR\conf to another serverC. Execute command upgrade_exportD. Database Revision Control



QUESTION 15Which of the following commands can provide the most complete restoration of a R77 configuration?

A. upgrade_importB. cpinfo -recoverC. cpconfigD. fwm dbimport -p <export file>




QUESTION 16When restoring R77 using the command upgrade_import, which of the following items are NOT restored?

A. SIC CertificatesB. LicensesC. Route tablesD. Global properties



QUESTION 17Your organization's disaster recovery plan needs an update to the backup and restore section to reap the new distributed R77 installation benefits. Your plan mustmeet the following required and desired objectives:

Required ObjectivE. The Security Policy repository must be backed up no less frequently than every 24 hours.Desired ObjectivE. The R77 components that enforce the Security Policies should be backed up at least once a week.Desired ObjectivE. Back up R77 logs at least once a week.

Your disaster recovery plan is as follows:- Use the cron utility to run the command upgrade_export each night on the Security Management Servers.- Configure the organization's routine back up software to back up the files created by the command upgrade_export.- Configure the GAiA back up utility to back up the Security Gateways every Saturday night.- Use the cron utility to run the command upgrade_export each Saturday night on the log servers.- Configure an automatic, nightly logswitch.- Configure the organization's routine back up software to back up the switched logs every night.

Upon evaluation, your plan:

A. Meets the required objective and only one desired objective.B. Meets the required objective but does not meet either desired objective.C. Does not meet the required objective.D. Meets the required objective and both desired objectives.




QUESTION 18Your company is running Security Management Server R77 on GAiA, which has been migrated through each version starting from Check Point 4.1. How do youadd a new administrator account?

A. Using SmartDashboard, under Users, select Add New AdministratorB. Using SmartDashboard or cpconfigC. Using the Web console on GAiA under Product configuration, select AdministratorsD. Using cpconfig on the Security Management Server, choose Administrators



QUESTION 19Your perimeter Security Gateway's external IP is 200.200.200.3. Your network diagram shows:


Required. Allow only network 192.168.10.0 and 192.168.20.0 to go out to the Internet, using 200.200.200.5.The local network 192.168.1.0/24 needs to use 200.200.200.3 to go out to the Internet. Assuming you enable all the settings in the NAT page of Global Properties,how could you achieve these requirements?

A. Create network objects for 192.168.10.0/24 and 192.168.20.0/24. Enable Hide NAT on both network objects, using 200.200.200.5 as hiding IP address. Add anARP entry for 200.200.200.3 for the MAC address of 200.200.200.5.

B. Create an Address Range object, starting from 192.168.10.1 to 192.168.20.254. Enable Hide NAT on the NAT page of the address range object. Enter Hiding IPaddress 200.200.200.5. Add an ARP entry for 200.200.200.5 for the MAC address of 200.200.200.3.

C. Create a network object 192.168.0.0/16. Enable Hide NAT on the NAT page. Enter 200.200.200.5 as the hiding IP address. Add an ARP entry for 200.200.200.5for the MAC address of 200.200.200.3.

D. Create two network objects: 192.168.10.0/24 and 192.168.20.0/24. Add the two network objects to a group object. Create a manual NAT rule like the following:Original source - group object; Destination - any; Service - any; Translated source - 200.200.200.5; Destination - original; Service - original.




QUESTION 20Because of pre-existing design constraints, you set up manual NAT rules for your HTTP server. However, your FTP server and SMTP server are both usingautomatic NAT rules. All traffic from your FTP and SMTP servers are passing through the Security Gateway without a problem, but traffic from the Web server isdropped on rule 0 because of anti-spoofing settings. What is causing this?

A. Manual NAT rules are not configured correctly.B. Allow bi-directional NAT is not checked in Global Properties.C. Routing is not configured correctly.D. Translate destination on client side is not checked in Global Properties under Manual NAT Rules.



QUESTION 21You enable Hide NAT on the network object, 10.1.1.0 behind the Security Gateway's external interface. You browse to the Google Website from host, 10.1.1.10successfully. You enable a log on the rule that allows 10.1.1.0 to exit the network. How many log entries do you see for that connection in SmartView Tracker?

A. Two, one for outbound, one for inboundB. Only one, outboundC. Two, both outbound, one for the real IP connection and one for the NAT IP connectionD. Only one, inbound



QUESTION 22Which of the following statements BEST describes Check Point's Hide Network Address Translation method?

A. Translates many destination IP addresses into one destination IP addressB. One-to-one NAT which implements PAT (Port Address Translation) for accomplishing both Source and Destination IP address translationC. Translates many source IP addresses into one source IP address


D. Many-to-one NAT which implements PAT (Port Address Translation) for accomplishing both Source and Destination IP address translation



QUESTION 23Which Check Point address translation method allows an administrator to use fewer ISP- assigned IP addresses than the number of internal hosts requiring Internetconnectivity?


A. HideB. Static DestinationC. Static SourceD. Dynamic Destination



QUESTION 24NAT can NOT be configured on which of the following objects?

A. HTTP Logical ServerB. GatewayC. Address Range


D. Host



QUESTION 25Which Check Point address translation method is necessary if you want to connect from a host on the Internet via HTTP to a server with a reserved (RFC 1918) IPaddress on your DMZ?

A. Dynamic Source Address TranslationB. Hide Address TranslationC. Port Address TranslationD. Static Destination Address Translation



QUESTION 26You want to implement Static Destination NAT in order to provide external, Internet users access to an internal Web Server that has a reserved (RFC 1918) IPaddress. You have an unused valid IP address on the network between your Security Gateway and ISP router. You control the router that sits between the firewallexternal interface and the Internet. What is an alternative configuration if proxy ARP cannot be used on your Security Gateway?

A. Publish a proxy ARP entry on the ISP router instead of the firewall for the valid IP address.B. Place a static ARP entry on the ISP router for the valid IP address to the firewall's external address.C. Publish a proxy ARP entry on the internal Web server instead of the firewall for the valid IP address.D. Place a static host route on the firewall for the valid IP address to the internal Web server.




QUESTION 27After implementing Static Address Translation to allow Internet traffic to an internal Web Server on your DMZ, you notice that any NATed connections to thatmachine are being dropped by anti-spoofing protections. Which of the following is the MOST LIKELY cause?

A. The Global Properties setting Translate destination on client side is unchecked. But the topology on the DMZ interface is set to Internal - Network defined by IPand Mask. Check the Global Properties setting Translate destination on client side.

B. The Global Properties setting Translate destination on client side is unchecked. But the topology on the external interface is set to Others +. Change topology toExternal.

C. The Global Properties setting Translate destination on client side is checked. But the topology on the external interface is set to External. Change topology toOthers +.

D. The Global Properties setting Translate destination on client side is checked. But the topology on the DMZ interface is set to Internal - Network defined by IP andMask. Uncheck the Global Properties setting Translate destination on client side.



QUESTION 28Which NAT option applicable for Automatic NAT applies to Manual NAT as well?

A. Allow bi-directional NATB. Automatic ARP configurationC. Translate destination on client-sideD. Enable IP Pool NAT



QUESTION 29Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT. You also have a small network 10.10.20.0/24 behind the internal router.


You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services.Which of the following configurations will allow this network to access the Internet?

A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.B. Configure Automatic Static NAT on network 10.10.20.0/24.C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network 10.10.20.0/24.D. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.



QUESTION 30You have three servers located in a DMZ, using private IP addresses. You want internal users from 10.10.10.x to access the DMZ servers by public IP addresses.Internal_net 10.10.10.x is configured for Hide NAT behind the Security Gateway's external interface.

What is the best configuration for 10.10.10.x users to access the DMZ servers, using the DMZ servers' public IP addresses?


A. When connecting to internal network 10.10.10.x, configure Hide NAT for the DMZ network behind the Security Gateway DMZ interface.B. When the source is the internal network 10.10.10.x, configure manual static NAT rules to translate the DMZ servers.C. When connecting to the Internet, configure manual Static NAT rules to translate the DMZ servers.D. When trying to access DMZ servers, configure Hide NAT for 10.10.10.x behind the DMZ's interface.



QUESTION 31An internal host initiates a session to the Google.com website and is set for Hide NAT behind the Security Gateway. The initiating traffic is an example of__________.

A. client side NATB. source NATC. destination NATD. None of these



QUESTION 32A host on the Internet initiates traffic to the Static NAT IP of your Web server behind the Security Gateway. With the default settings in place for NAT, the initiatingpacket will translate the _________.

A. destination on server sideB. source on server sideC. source on client sideD. destination on client side

Correct Answer: DSection: Volume A


Explanation


QUESTION 33A Web server behind the Security Gateway is set to Automatic Static NAT. Client side NAT is not checked in the Global Properties. A client on the Internet initiatesa session to the Web Server. Assuming there is a rule allowing this traffic, what other configuration must be done to allow the traffic to reach the Web server?

A. Automatic ARP must be unchecked in the Global Properties.B. Nothing else must be configured.C. A static route must be added on the Security Gateway to the internal host.D. A static route for the NAT IP must be added to the Gateway's upstream router.



QUESTION 34When translation occurs using automatic Hide NAT, what also happens?

A. Nothing happens.B. The destination is modified.C. The destination port is modified.D. The source port is modified.



QUESTION 35The fw monitor utility is used to troubleshoot which of the following problems?


A. Phase two key negotiationB. Address translationC. Log Consolidation EngineD. User data base corruption



QUESTION 36Looking at the SYN packets in the Wireshark output, select the statement that is true about NAT.Exhibit:

A. This is an example of Hide NAT.B. There is not enough information provided in the Wireshark capture to determine the NAT settings.C. This is an example of Static NAT and Translate destination on client side unchecked in Global Properties.D. This is an example of Static NAT and Translate destination on client side checked in Global Properties.

Correct Answer: D


Section: Volume AExplanation


QUESTION 37In SmartDashboard, Translate destination on client side is checked in Global Properties. When Network Address Translation is used:

A. It is not necessary to add a static route to the Gateway's routing table.B. It is necessary to add a static route to the Gateway's routing table.C. The Security Gateway's ARP file must be modified.D. VLAN tagging cannot be defined for any hosts protected by the Gateway.



QUESTION 38Secure Internal Communications (SIC) is completely NAT-tolerant because it is based on:


A. IP addresses.B. SIC is not NAT-tolerant.C. SIC names.D. MAC addresses.

Correct Answer: CSection: Volume A


Explanation


QUESTION 39Static NAT connections, by default, translate on which firewall kernel inspection point?

A. InboundB. OutboundC. Post-inboundD. Eitherbound



QUESTION 40You are MegaCorp's Security Administrator. There are various network objects which must be NATed. Some of them use the Automatic Hide NAT method, whileothers use the Automatic Static NAT method. What is the rule order if both methods are used together? Give the BEST answer.

A. The Administrator decides the rule order by shifting the corresponding rules up and down.B. The Static NAT rules have priority over the Hide NAT rules and the NAT on a node has priority over the NAT on a network or an address range.C. The Hide NAT rules have priority over the Static NAT rules and the NAT on a node has priority over the NAT on a network or an address range.D. The rule position depends on the time of their creation. The rules created first are placed at the top; rules created later are placed successively below the others.



QUESTION 41Which answers are TRUE? Automatic Static NAT CANNOT be used when:

1) NAT decision is based on the destination port.


2) Both Source and Destination IP's have to be translated.3) The NAT rule should only be installed on a dedicated Gateway.4) NAT should be performed on the server side.

A. 1 and 2B. 2 and 4C. 1, 3, and 4D. 2 and 3



QUESTION 42After filtering a fw monitor trace by port and IP, a packet is displayed three times; in the i, I, and o inspection points, but not in the O inspection point. Which is thelikely source of the issue?

A. The packet has been sent out through a VPN tunnel unencrypted.B. An IPSO ACL has blocked the packet's outbound passage.C. A SmartDefense module has blocked the packet.D. It is due to NAT.



QUESTION 43Your internal network is configured to be 10.1.1.0/24. This network is behind your perimeter R77 Gateway, which connects to your ISP provider. How do youconfigure the Gateway to allow this network to go out to the Internet?

A. Use Hide NAT for network 10.1.1.0/24 behind the external IP address of your perimeter Gateway.B. Use Hide NAT for network 10.1.1.0/24 behind the internal interface of your perimeter Gateway.C. Use automatic Static NAT for network 10.1.1.0/24.


D. Do nothing, as long as 10.1.1.0 network has the correct default Gateway.



QUESTION 44You are a Security Administrator who has installed Security Gateway R77 on your network. You need to allow a specific IP address range for a partner site toaccess your intranet Web server. To limit the partner's access for HTTP and FTP only, you did the following:

1) Created manual Static NAT rules for the Web server.2) Cleared the following settings in the Global Properties > Network Address Translation screen:

- Allow bi-directional NAT- Translate destination on client side

Do the above settings limit the partner's access?

A. Yes. This will ensure that traffic only matches the specific rule configured for this traffic, and that the Gateway translates the traffic after accepting the packet.B. No. The first setting is not applicable. The second setting will reduce performance.C. Yes. Both of these settings are only applicable to automatic NAT rules.D. No. The first setting is only applicable to automatic NAT rules. The second setting will force translation by the kernel on the interface nearest to the client.



QUESTION 45You enable Automatic Static NAT on an internal host node object with a private IP address of 10.10.10.5, which is NATed into 216.216.216.5. (You use the defaultsettings in Global Properties / NAT.)When you run fw monitor on the R77 Security Gateway and then start a new HTTP connection from host 10.10.10.5 to browse the Internet, at what point in themonitor output will you observe the HTTP SYN-ACK packet translated from 216.216.216.5 back into 10.10.10.5?

A. o=outbound kernel, before the virtual machineB. I=inbound kernel, after the virtual machine


C. O=outbound kernel, after the virtual machineD. i=inbound kernel, before the virtual machine



QUESTION 46You have configured Automatic Static NAT on an internal host-node object. You clear the box Translate destination on client site from Global Properties > NAT.Assuming all other NAT settings in Global Properties are selected, what else must be configured so that a host on the Internet can initiate an inbound connection tothis host?

A. No extra configuration is needed.B. A proxy ARP entry, to ensure packets destined for the public IP address will reach the Security Gateway's external interface.C. The NAT IP address must be added to the external Gateway interface anti-spoofing group.D. A static route, to ensure packets destined for the public NAT IP address will reach the Gateway's internal interface.



QUESTION 47You just installed a new Web server in the DMZ that must be reachable from the Internet. You create a manual Static NAT rule as follows:SourcE. Any || Destination: web_public_IP || ServicE. Any || Translated SourcE. original || Translated Destination: web_private_IP || ServicE. Original "web_public_IP ? is the node object that represents the new Web server's public IP address. "web_private_IP ? is the node object that represents the new Website's private IP address. You enable all settings from Global Properties > NAT.When you try to browse the Web server from the Internet you see the error "page cannot be displayed ?. Which of the following is NOT a possible reason?

A. There is no Security Policy defined that allows HTTP traffic to the protected Web server.B. There is no ARP table entry for the protected Web server's public IP address.C. There is no route defined on the Security Gateway for the public IP address to the Web server's private IP address.D. There is no NAT rule translating the source IP address of packets coming from the protected Web server.




QUESTION 48You are responsible for the configuration of MegaCorp's Check Point Firewall. You need to allow two NAT rules to match a connection. Is it possible? Give theBEST answer.

A. No, it is not possible to have more than one NAT rule matching a connection. When the firewall receives a packet belonging to a connection, it compares itagainst the first rule in the Rule Base, then the second rule, and so on. When it finds a rule that matches, it stops checking and applies that rule.

B. Yes, it is possible to have two NAT rules which match a connection, but only in using Manual NAT (bidirectional NAT).C. Yes, there are always as many active NAT rules as there are connections.D. Yes, it is possible to have two NAT rules which match a connection, but only when using Automatic NAT (bidirectional NAT).



QUESTION 49You have created a Rule Base for firewall, websydney. Now you are going to create a new policy package with security and address translation rules for a secondGateway. What is TRUE about the new package's NAT rules?Exhibit:


A. Rules 1, 2, 3 will appear in the new package.B. Only rule 1 will appear in the new package.C. NAT rules will be empty in the new package.D. Rules 4 and 5 will appear in the new package.



QUESTION 50What is the default setting when you use NAT?

A. Destination Translated on Server sideB. Destination Translated on Client sideC. Source Translated on both sidesD. Source Translated on Client side

Correct Answer: BSection: Volume A


Explanation


QUESTION 51Select the TRUE statements about the Rule Base shown? Exhibit:

1) HTTP traffic from webrome to websingapore will be encrypted.2) HTTP traffic from websingapore to webrome will be encrypted.3) HTTP traffic from webrome to websingapore will be authenticated.4) HTTP traffic from websingapore to webrome will be blocked.

A. 1, 2, and 3B. 3 onlyC. 2 and 3


D. 3 and 4



QUESTION 52Which rule is responsible for the client authentication failure? Exhibit:

A. Rule 4B. Rule 6C. Rule 3D. Rule 5

Correct Answer: A


Section: Volume AExplanation


QUESTION 53You receive a notification that long-lasting Telnet connections to a mainframe are dropped after an hour of inactivity. Reviewing SmartView Tracker shows thepacket is dropped with the error:Unknown established connectionHow do you resolve this problem without causing other security issues? Choose the BEST answer.

A. Increase the service-based session timeout of the default Telnet service to 24-hours.B. Ask the mainframe users to reconnect every time this error occurs.C. Increase the TCP session timeout under Global Properties > Stateful Inspection.D. Create a new TCP service object on port 23 called Telnet-mainframe. Define a service-based session timeout of 24-hours. Use this new object only in the rule

that allows the Telnet connections to the mainframe.



QUESTION 54Which SmartConsole tool would you use to see the last policy pushed in the audit log?

A. SmartView TrackerB. None, SmartConsole applications only communicate with the Security Management Server.C. SmartView StatusD. SmartView Server




QUESTION 55SmartView Tracker logs the following Security Administrator activities, EXCEPT:

A. Object creation, deletion, and editingB. Tracking SLA complianceC. Administrator login and logoutD. Rule Base changes



QUESTION 56What happens when you select File > Export from the SmartView Tracker menu?

A. Current logs are exported to a new *.log file.B. Exported log entries are not viewable in SmartView Tracker.C. Logs in fw.log are exported to a file that can be opened by Microsoft Excel.D. Exported log entries are deleted from fw.log.



QUESTION 57By default, when you click File > Switch Active File in SmartView Tracker, the Security Management Server:

A. Saves the current log file, names the log file by date and time, and starts a new log file.B. Purges the current log file, and starts a new log file.C. Prompts you to enter a filename, and then saves the log file.D. Purges the current log file, and prompts you for the new log's mode.




QUESTION 58You are working with three other Security Administrators. Which SmartConsole component can be used to monitor changes to rules or object properties made bythe other administrators?

A. Eventia TrackerB. SmartView MonitorC. Eventia MonitorD. SmartView Tracker



QUESTION 59Which SmartView Tracker mode allows you to read the SMTP e-mail body sent from the Chief Executive Officer (CEO) of a company?


A. This is not a SmartView Tracker feature.B. Display Capture ActionC. Network and Endpoint TabD. Display Payload View




QUESTION 60You can include External commands in SmartView Tracker by the menu Tools > Custom Commands.The Security Management Server is running under GAiA, and the GUI is on a system running Microsoft Windows. How do you run the command traceroute on anIP address?

A. There is no possibility to expand the three pre-defined options Ping, Whois, and Nslookup.B. Go to the menu Tools > Custom Commands and configure the Windows command tracert.exe to the list.C. Use the program GUIdbedit to add the command traceroute to the Security Management Server properties.D. Go to the menu, Tools > Custom Commands and configure the Linux command traceroute to the list.



QUESTION 61Where is the easiest and BEST place to find information about connections between two machines?

A. All options are valid.B. On a Security Gateway using the command fw log.C. On a Security Management Server, using SmartView Tracker.D. On a Security Gateway Console interface; it gives you detailed access to log files and state table information.




QUESTION 62Which of the following can be found in cpinfo from an enforcement point?

A. Everything NOT contained in the file r2infoB. VPN keys for all established connections to all enforcement pointsC. The complete file objects_5_0.cD. Policy file information specific to this enforcement point



QUESTION 63Which R77 SmartConsole tool would you use to verify the installed Security Policy name on a Security Gateway?

A. SmartView TrackerB. None, SmartConsole applications only communicate with the Security Management Server.C. SmartView ServerD. SmartUpdate



QUESTION 64You have detected a possible intruder listed in SmartView Tracker's active pane. What is the fastest method to block this intruder from accessing your networkindefinitely?

A. Modify the Rule Base to drop these connections from the network.B. In SmartView Tracker, select Tools > Block Intruder.C. In SmartView Monitor, select Tools > Suspicious Activity Rules.D. In SmartDashboard, select IPS > Network Security > Denial of Service.




QUESTION 65Where can an administrator specify the notification action to be taken by the firewall in the event that available disk space drops below 15%?

A. SmartView Monitor > Gateway Status > Threshold SettingsB. SmartView Tracker > Audit Tab > Gateway CountersC. SmartView Monitor > Gateway Status > System Information > ThresholdsD. This can only be monitored by a user-defined script.



QUESTION 66Where can an administrator configure the notification action in the event of a policy install time change?

A. SmartView Monitor > Gateways > Thresholds SettingsB. SmartView Monitor > Gateway Status > System Information > ThresholdsC. SmartDashboard > Policy Package ManagerD. SmartDashboard > Security Gateway Object > Advanced Properties Tab



QUESTION 67Where are custom queries stored in R77 SmartView Tracker?


A. On the SmartView Tracker PC local file system under the user's profile.B. On the Security Management Server tied to the GUI client IP.C. On the Security Management Server tied to the Administrator User Database login name.D. On the SmartView Tracker PC local file system shared by all users of that local PC.



QUESTION 68How do you view a Security Administrator's activities with SmartConsole?

A. Eventia SuiteB. SmartView Monitor using the Administrator Activity filterC. SmartView Tracker in the Management tabD. SmartView Tracker in the Network and Endpoint tabs



QUESTION 69Which SmartView Tracker selection would most effectively show who installed a Security Policy blocking all traffic from the corporate network?

A. Management tabB. Custom filterC. Network and Endpoint tabD. Active tab

Correct Answer: ASection: Volume A


Explanation


QUESTION 70You are reviewing the Security Administrator activity for a bank and comparing it to the change log. How do you view Security Administrator activity?

A. SmartView Tracker cannot display Security Administrator activity; instead, view the system logs on the Security Management Server's Operating System.B. SmartView Tracker in Network and Endpoint ModeC. SmartView Tracker in Active ModeD. SmartView Tracker in Management Mode



QUESTION 71Which of the following R77 SmartView Tracker views will display a popup warning about performance implications on the Security Gateway?

A. All Records QueryB. Account QueryC. Active TabD. Audit Tab



QUESTION 72While in SmartView Tracker, Brady has noticed some very odd network traffic that he thinks could be an intrusion. He decides to block the traffic for 60 minutes, butcannot remember all the steps. What is the correct order of steps needed to set up the block?

1) Select Active Mode tab in SmartView Tracker.


2) Select Tools > Block Intruder.3) Select Log Viewing tab in SmartView Tracker.4) Set Blocking Timeout value to 60 minutes.5) Highlight connection that should be blocked.

A. 1, 2, 5, 4B. 3, 2, 5, 4C. 1, 5, 2, 4D. 3, 5, 2, 4



QUESTION 73How can you activate the SNMP daemon on a Check Point Security Management Server?

A. Using the command line, enter snmp_install.B. From cpconfig, select SNMP extension.C. Any of these options will work.D. In SmartDashboard, right-click a Check Point object and select Activate SNMP.

Correct Answer: BSection: Volume BExplanation


QUESTION 74Which of the following describes the default behavior of an R77 Security Gateway?

A. Traffic not explicitly permitted is dropped.B. Traffic is filtered using controlled port scanning.C. All traffic is expressly permitted via explicit rules.D. IP protocol types listed as secure are allowed by default, i.e. ICMP, TCP, UDP sessions are inspected.


Correct Answer: ASection: Volume BExplanation


QUESTION 75When you use the Global Properties' default settings on R77, which type of traffic will be dropped if NO explicit rule allows the traffic?

A. SmartUpdate connectionsB. Outgoing traffic originating from the Security GatewayC. Firewall logging and ICA key-exchange informationD. RIP traffic

Correct Answer: DSection: Volume BExplanation


QUESTION 76You have installed a R77 Security Gateway on GAiA. To manage the Gateway from the enterprise Security Management Server, you create a new Gateway objectand Security Policy. When you install the new Policy from the Policy menu, the Gateway object does not appear in the Install Policy window as a target. What is theproblem?

A. The object was created with Node > Gateway.B. No Masters file is created for the new Gateway.C. The Gateway object is not specified in the first policy rule column Install On.D. The new Gateway's temporary license has expired.




QUESTION 77Which of the following is a viable consideration when determining Rule Base order?

A. Placing frequently accessed rules before less frequently accessed rulesB. Grouping IPS rules with dynamic drop rulesC. Adding SAM rules at the top of the Rule BaseD. Grouping rules by date of creation



QUESTION 78Which of the following is a viable consideration when determining Rule Base order?

A. Grouping IPS rules with dynamic drop rulesB. Placing more restrictive rules before more permissive rulesC. Grouping authentication rules with QOS rulesD. Grouping reject and drop rules after the Cleanup Rule



QUESTION 79You would use the Hide Rule feature to:

A. View only a few rules without the distraction of others.B. Hide rules from read-only administrators.C. Hide rules from a SYN/ACK attack.D. Make rules invisible to incoming packets.




QUESTION 80You are a Security Administrator using one Security Management Server managing three different firewalls. One firewall does NOT show up in the dialog box whenattempting to install a Security Policy. Which of the following is a possible cause?

A. The firewall has failed to sync with the Security Management Server for 60 minutes.B. The firewall object has been created but SIC has not yet been established.C. The firewall is not listed in the Policy Installation Targets screen for this policy package.D. The license for this specific firewall has expired.

Correct Answer: CSection: Volume BExplanation


QUESTION 81Your shipping company uses a custom application to update the shipping distribution database. The custom application includes a service used only to notifyremote sites that the distribution database is malfunctioning. The perimeter Security Gateway's Rule Base includes a rule to accept this traffic. Since you areresponsible for multiple sites, you want notification by a text message to your cellular phone, whenever traffic is accepted on this rule. Which of the following wouldwork BEST for your purpose?

A. Logging implied rulesB. User-defined alert scriptC. SNMP trapD. SmartView Monitor Threshold




QUESTION 82A client has created a new Gateway object that will be managed at a remote location. When the client attempts to install the Security Policy to the new Gatewayobject, the object does not appear in the Install On check box. What should you look for?

A. Secure Internal Communications (SIC) not configured for the object.B. A Gateway object created using the Check Point > Externally Managed VPN Gateway option from the Network Objects dialog box.C. Anti-spoofing not configured on the interfaces on the Gateway object.D. A Gateway object created using the Check Point > Security Gateway option in the network objects, dialog box, but still needs to configure the interfaces for the

Security Gateway object.



QUESTION 83A Security Policy installed by another Security Administrator has blocked all SmartDashboard connections to the stand-alone installation of R77. After running thecommand fw unloadlocal, you are able to reconnect with SmartDashboard and view all changes. Which of the following change is the most likely cause of theblock?

A. The Allow Control Connections setting in Policy > Global Properties has been unchecked.B. A Stealth Rule has been configured for the R77 Gateway.C. The Security Policy installed to the Gateway had no rules in it.D. The Gateway Object representing your Gateway was configured as an Externally Managed VPN Gateway.



QUESTION 84When configuring anti-spoofing on the Security Gateway object interfaces, which of the following is NOT a valid R77 topology configuration?


A. ExternalB. AnyC. SpecificD. Not Defined



QUESTION 85You are conducting a security audit. While reviewing configuration files and logs, you notice logs accepting POP3 traffic, but you do not see a rule allowing POP3traffic in the Rule Base.Which of the following is the most likely cause?


A. The POP3 rule is disabled.B. POP3 is accepted in Global Properties.C. The POP3 rule is hidden.D. POP3 is one of 3 services (POP3, IMAP, and SMTP) accepted by the default mail object in R77.



QUESTION 86Which rule is responsible for the installation failure? Exhibit:





QUESTION 87


Reviewing the Rule Base, you see that ________ is responsible for the client authentication failure.Exhibit:

Exhibit:




QUESTION 88


Which rule is responsible for the installation failure? Exhibit:




QUESTION 89As a Security Administrator, you must refresh the Client Authentication authorization time-out every time a new user connection is authorized. How do you do this?


Enable the Refreshable Timeout setting:

A. in the user object's Authentication screen.B. in the Gateway object's Authentication screen.C. in the Limit tab of the Client Authentication Action Properties screen.D. in the Global Properties Authentication screen.



QUESTION 90The technical-support department has a requirement to access an intranet server. When configuring a User Authentication rule to achieve this, which of thefollowing should you remember?

A. You can only use the rule for Telnet, FTP, SMTP, and rlogin services.B. The Security Gateway first checks if there is any rule that does not require authentication for this type of connection before invoking the Authentication Security

Server.C. Once a user is first authenticated, the user will not be prompted for authentication again until logging out.D. You can limit the authentication attempts in the User Properties' Authentication tab.



QUESTION 91Choose the BEST sequence for configuring user management in SmartDashboard, using an LDAP server.

A. Configure a server object for the LDAP Account Unit, enable LDAP in Global Properties, and create an LDAP resource object.B. Configure a workstation object for the LDAP server, configure a server object for the LDAP Account Unit, and enable LDAP in Global Properties.C. Enable User Directory in Global Properties, configure a host-node object for the LDAP server, and configure a server object for the LDAP Account Unit.D. Configure a server object for the LDAP Account Unit, and create an LDAP resource object.




QUESTION 92You cannot use SmartDashboard's User Directory features to connect to the LDAP server. What should you investigate?

1) Verify you have read-only permissions as administrator for the operating system.2) Verify there are no restrictions blocking SmartDashboard's User Manager from connecting to the LDAP server.3) Check that the login Distinguished Name configured has root permission (or at least write permission Administrative access) in the LDAP Server's access controlconfiguration.

A. 1, 2, and 3B. 2 and 3C. 1 and 2D. 1 and 3



QUESTION 93Identify the ports to which the Client Authentication daemon listens by default.

A. 259, 900B. 256, 600C. 80, 256D. 8080, 529




QUESTION 94What is the Manual Client Authentication TELNET port?

A. 23B. 264C. 900D. 259



QUESTION 95Your company's Security Policy forces users to authenticate to the Gateway explicitly, before they can use any services. The Gateway does not allow the Telnetservice to itself from any location. How would you configure authentication on the Gateway? With a:

A. Client Authentication rule using the manual sign-on method, using HTTP on port 900B. Client Authentication rule, using partially automatic sign onC. Client Authentication for fully automatic sign onD. Session Authentication rule



QUESTION 96Which authentication type permits five different sign-on methods in the authentication properties window?

A. Client AuthenticationB. Manual Authentication


C. User AuthenticationD. Session Authentication



QUESTION 97Which Client Authentication sign-on method requires the user to first authenticate via the User Authentication mechanism, when logging in to a remote server withTelnet?

A. Manual Sign OnB. Agent Automatic Sign OnC. Partially Automatic Sign OnD. Standard Sign On



QUESTION 98Which Security Gateway R77 configuration setting forces the Client Authentication authorization time-out to refresh, each time a new user is authenticated? The:

A. Time properties, adjusted on the user objects for each user, in the Client Authentication rule Source.B. IPS > Application Intelligence > Client Authentication > Refresh User Timeout option enabled.C. Refreshable Timeout setting, in Client Authentication Action Properties > Limits.D. Global Properties > Authentication parameters, adjusted to allow for Regular Client Refreshment.




QUESTION 99All R77 Security Servers can perform authentication with the exception of one. Which of the Security Servers can NOT perform authentication?

A. FTPB. SMTPC. HTTPD. RLOGIN



QUESTION 100Which of the following are authentication methods that Security Gateway R77 uses to validate connection attempts? Select the response below that includes theMOST complete list of valid authentication methods.

A. Proxied, User, Dynamic, SessionB. Connection, User, ClientC. User, Client, SessionD. User, Proxied, Session



QUESTION 101Security Gateway R77 supports User Authentication for which of the following services? Select the response below that contains the MOST correct list of supportedservices.

A. SMTP, FTP, TELNETB. SMTP, FTP, HTTP, TELNET


C. FTP, HTTP, TELNETD. FTP, TELNET



QUESTION 102With the User Directory Software Blade, you can create R77 user definitions on a(n) _________ Server.

A. LDAPB. RadiusC. SecureIDD. NT Domain



QUESTION 103The User Directory Software Blade is used to integrate which of the following with Security Gateway R77?

A. RADIUS serverB. Account Management Client serverC. UserAuthority serverD. LDAP server




QUESTION 104If you are experiencing LDAP issues, which of the following should you check?

A. Connectivity between the R77 Gateway and LDAP serverB. Secure Internal Communications (SIC)C. Overlapping VPN DomainsD. Domain name resolution



QUESTION 105Which type of R77 Security Server does not provide User Authentication?

A. SMTP Security ServerB. HTTP Security ServerC. FTP Security ServerD. HTTPS Security Server



QUESTION 106You are about to integrate RSA SecurID users into the Check Point infrastructure. What kind of users are to be defined via SmartDashboard?

A. A group with generic userB. All usersC. LDAP Account Unit GroupD. Internal user Group




QUESTION 107For which service is it NOT possible to configure user authentication?

A. TelnetB. SSHC. FTPD. HTTPS



QUESTION 108Charles requests a Website while using a computer not in the net_singapore network. What is TRUE about his location restriction?Exhibit:



A. Source setting in Source column always takes precedence.B. Source setting in User Properties always takes precedence.C. As location restrictions add up, he would be allowed from net_singapore and net_sydney.D. It depends on how the User Auth object is configured; whether User Properties or Source Restriction takes precedence.



QUESTION 109In the Rule Base displayed, user authentication in Rule 4 is configured as fully automatic. Eric is a member of the LDAP group, MSD_Group.

What happens when Eric tries to connect to a server on the Internet?


A. None of these things will happen.B. Eric will be authenticated and get access to the requested server.C. Eric will be blocked because LDAP is not allowed in the Rule Base.D. Eric will be dropped by the Stealth Rule.



QUESTION 110Which of the following is an authentication method used by Identity Awareness?

A. SSLB. Captive PortalC. RSAD. PKI



QUESTION 111What is the purpose of an Identity Agent?

A. Provide user and machine identity to a gatewayB. Manual entry of user credentials for LDAP authenticationC. Audit a user's access, and send that data to a log serverD. Disable Single Sign On




QUESTION 112What type of traffic can be re-directed to the Captive Portal?


A. SMTPB. HTTPC. All of the aboveD. FTP



QUESTION 113The Captive Portal tool:

A. Acquires identities from unidentified users.B. Is only used for guest user authentication.C. Allows access to users already identified.D. Is deployed from the Identity Awareness page in the Global Properties settings.




QUESTION 114Captive Portal is a __________ that allows the gateway to request login information from the user.

A. Pre-configured and customizable web-based toolB. Transparent network inspection toolC. LDAP server add-onD. Separately licensed feature



QUESTION 115Complete this statement from the options provided. Using Captive Portal, unidentified users may be either; blocked, allowed to enter required credentials, orrequired to download the _____________.

A. Identity Awareness AgentB. Full Endpoint ClientC. ICA CertificateD. SecureClient



QUESTION 116Users with Identity Awareness Agent installed on their machines login with __________, so that when the user logs into the domain, that information is also used tomeet Identity Awareness credential requests.

A. Key-logging


B. ICA CertificatesC. SecureClientD. Single Sign-On



QUESTION 117Which of the following methods is NOT used by Identity Awareness to catalog identities?

A. AD QueryB. Captive PortalC. Identity AgentD. GPO



QUESTION 118When using AD Query to authenticate users for Identity Awareness, identity data is received seamlessly from the Microsoft Active Directory (AD). What is NOT arecommended usage of this method?

A. Leveraging identity in the application control bladeB. Basic identity enforcement in the internal networkC. Identity-based auditing and loggingD. Identity-based enforcement for non-AD users (non-Windows and guest users)




QUESTION 119The Identity Agent is a lightweight endpoint agent that authenticates securely with Single Sign- On (SSO). What is not a recommended usage of this method?

A. When accuracy in detecting identity is crucialB. Leveraging identity for Data Center protectionC. Protecting highly sensitive serversD. Identity based enforcement for non-AD users (non-Windows and guest users)



QUESTION 120Which of the following is NOT a valid option when configuring access for Captive Portal?

A. From the InternetB. Through internal interfacesC. Through all interfacesD. According to the Firewall Policy



QUESTION 121If you were NOT using IKE aggressive mode for your IPsec tunnel, how many packets would you see for normal Phase 1 exchange?

A. 9B. 2C. 3


D. 6



QUESTION 122How many packets does the IKE exchange use for Phase 1 Main Mode?

A. 12B. 1C. 3D. 6



QUESTION 123How many packets does the IKE exchange use for Phase 1 Aggressive Mode?

A. 12B. 6C. 3D. 1




QUESTION 124Which of the following actions take place in IKE Phase 2 with Perfect Forward Secrecy disabled?

A. Symmetric IPsec keys are generated.B. Each Security Gateway generates a private Diffie-Hellman (DH) key from random pools.C. The DH public keys are exchanged.D. Peers authenticate using certificates or preshared secrets.



QUESTION 125Which of the following commands can be used to remove site-to-site IPsec Security Association (SA)?

A. vpn debug ipsecB. vpn ipsecC. fw ipsec tuD. vpn tu



QUESTION 126How many packets are required for IKE Phase 2?

A. 12B. 2C. 6D. 3




QUESTION 127Which of the following actions do NOT take place in IKE Phase 1?

A. Peers agree on encryption method.B. Diffie-Hellman key is combined with the key material to produce the symmetrical IPsec key.C. Peers agree on integrity method.D. Each side generates a session key from its private key and the peer's public key.



QUESTION 128When using vpn tu, which option must you choose if you only want to clear phase 2 for a specific IP (gateway)?Exhibit:


A. (5) Delete all IPsec SAs for a given peer (GW)B. (7) Delete all IPsec+IKE SAs for a given peer (GW)C. (6) Delete all IPsec SAs for a given User (Client)D. (8) Delete all IPsec+IKE SAs for a given User (Client)



QUESTION 129When using vpn tu, which option must you choose if you want to rebuild your VPN for a specific IP (gateway)?

Exhibit:

A. (6) Delete all IPsec SAs for a given User (Client)B. (5) Delete all IPsec SAs for a given peer (GW)C. (8) Delete all IPsec+IKE SAs for a given User (Client)D. Delete all IPsec+IKE SAs for a given peer (GW)

Correct Answer: D


Section: Volume BExplanation


QUESTION 130Which SmartConsole component can Administrators use to track changes to the Rule Base?

A. WebUIB. SmartView TrackerC. SmartView MonitorD. SmartReporter



QUESTION 131UDP packets are delivered if they are ___________.

A. a stateful ACK to a valid SYN-SYN/ACK on the inverse UDP ports and IPB. a valid response to an allowed request on the inverse UDP ports and IPC. bypassing the kernel by the forwarding layer of ClusterXLD. referenced in the SAM related dynamic tables



QUESTION 132The INSPECT engine inserts itself into the kernel between which two OSI model layers?


A. Session and TransportB. Physical and DataC. Presentation and ApplicationD. Datalink and Network



QUESTION 133Your company has two headquarters, one in London, and one in New York. Each office includes several branch offices. The branch offices need to communicatewith the headquarters in their country, not with each other, and only the headquarters need to communicate directly. What is the BEST configuration for establishingVPN Communities for this company? VPN Communities comprised of:

A. One star Community with the option to mesh the center of the star: New York and London Gateways added to the center of the star with the mesh centerGateways option checked; all London branch offices defined in one satellite window, but, all New York branch offices defined in another satellite window.

B. Two mesh and one star Community: One mesh Community is set up for each of the headquarters and its branch offices. The star Community is configured withLondon as the center of the Community and New York is the satellite.

C. Two star and one mesh Community: One star Community is set up for each site, with headquarters as the Community center, and its branches as satellites. Themesh Community includes only New York and London Gateways.

D. Three mesh Communities: One for London headquarters and its branches, one for New York headquarters and its branches, and one for London and New Yorkheadquarters.



QUESTION 134Your company has two headquarters, one in London, one in New York. Each of the headquarters includes several branch offices. The branch offices only need tocommunicate with the headquarters in their country, not with each other, and the headquarters need to communicate directly. What is the BEST configuration forestablishing VPN Communities among the branch offices and their headquarters, and between the two headquarters? VPN Communities comprised of:

A. Three mesh Communities: one for London headquarters and its branches; one for New York headquarters and its branches; and one for London and New York


headquarters.B. Two mesh and one star Community: Each mesh Community is set up for each site between headquarters their branches. The star Community has New York as

the center and London as its satellite.C. Two star communities and one mesh: A star community for each city with headquarters as center, and branches as satellites. Then one mesh community for the

two headquarters.D. One star Community with the option to mesh the center of the star: New York and London Gateways added to the center of the star with the "mesh center

Gateways ? option checked; all London branch offices defined in one satellite window; but, all New York branch offices defined in another satellite window.



QUESTION 135Match the terms with their definitions:Exhibit:

A. A-3, B-2, C-4, D-1B. A-2, B-3, C-4, D-1C. A-3, B-2, C-1, D-4D. A-3, B-4, C-1, D-2




QUESTION 136Which of these attributes would be critical for a site-to-site VPN?

A. Scalability to accommodate user groupsB. Centralized managementC. Strong authenticationD. Strong data encryption



QUESTION 137Which of the following is NOT true for Clientless VPN?

A. The Gateway can enforce the use of strong encryption.B. The Gateway accepts any encryption method that is proposed by the client and supported in the VPN.C. Secure communication is provided between clients and servers that support HTTP.D. User Authentication is supported.



QUESTION 138You want to establish a VPN, using certificates. Your VPN will exchange certificates with an external partner. Which of the following activities should you do first?



A. Create a new logical-server object to represent your partner's CA.B. Exchange exported CA keys and use them to create a new server object to represent your partner's Certificate Authority (CA).C. Manually import your partner's Certificate Revocation List.D. Manually import your partner's Access Control List.



QUESTION 139Your company is still using traditional mode VPN configuration on all Gateways and policies. Your manager now requires you to migrate to a simplified VPN policyto benefit from the new features. This needs to be done with no downtime due to critical applications which must run constantly. How would you start such amigration?

A. This cannot be done without downtime as a VPN between a traditional mode Gateway and a simplified mode Gateway does not work.B. This can not be done as it requires a SIC- reset on the Gateways first forcing an outage.C. You first need to completely rewrite all policies in simplified mode and then push this new policy to all Gateways at the same time.D. Convert the required Gateway policies using the simplified VPN wizard, check their logic and then migrate Gateway per Gateway.



QUESTION 140


Your manager requires you to setup a VPN to a new business partner site. The administrator from the partner site gives you his VPN settings and you notice that hesetup AES 128 for IKE phase 1 and AES 256 for IKE phase 2. Why is this a problematic setup?

A. The two algorithms do not have the same key length and so don't work together. You will get the error .... No proposal chosen....B. All is fine as the longest key length has been chosen for encrypting the data and a shorter key length for higher performance for setting up the tunnel.C. Only 128 bit keys are used for phase 1 keys which are protecting phase 2, so the longer key length in phase 2 only costs performance and does not add security

due to a shorter key in phase 1.D. All is fine and can be used as is.



QUESTION 141Why are certificates preferred over pre-shared keys in an IPsec VPN?

A. Weak performancE. PSK takes more time to encrypt than Diffie-Hellman.B. Weak Security: PSK are static and can be brute-forced.C. Weak security: PSKs can only have 112 bit length.D. Weak scalability: PSKs need to be set on each and every Gateway.



QUESTION 142What is a possible reason for the IKE failure shown in this screenshot?


A. Mismatch in VPN Domains.B. Mismatch in preshared secrets.C. Mismatch in Diffie-Hellman group.D. Mismatch in encryption schemes.




QUESTION 143When using an encryption algorithm, which is generally considered the best encryption method?

A. Triple DESB. AES-256C. CAST cipherD. DES



QUESTION 144Which do you configure to give remote access VPN users a local IP address?

A. Encryption domain poolB. NAT poolC. Office mode IP poolD. Authentication pool



QUESTION 145


You have a mesh VPN Community configured to create a site-to-site VPN. Given the displayed VPN properties, what can you conclude about this community?Exhibit:


A. The VPN Community will perform IKE Phase 1 key-exchange encryption using the longest key Security Gateway R77 supports.B. Changing the setting Perform key exchange encryption with from AES-256 to 3DES will enhance the VPN Community's security , and reduce encryption

overhead.C. Change the data-integrity setting for this VPN Community because MD5 is incompatible with AES.D. Changing the setting Perform IPsec data encryption with from AES-128 to 3Des will increase the encryption overhead.



QUESTION 146Certificates for Security Gateways are created during a simple initialization from _____________.

A. sysconfigB. The ICA management toolC. SmartUpdateD. SmartDashboard



QUESTION 147Which of the below is the MOST correct process to reset SIC from SmartDashboard?

A. Run cpconfig, and click Reset.B. Click the Communication button for the firewall object, then click Reset. Run cpconfig and type a new activation key.C. Run cpconfig, and select Secure Internal Communication > Change One Time Password.D. Click Communication > Reset on the Gateway object, and type a new activation key.

Correct Answer: BSection: Volume B


Explanation


QUESTION 148Exhibit:

You installed Security Management Server on a computer using GAiA in the MegaCorp home office. You use IP address 10.1.1.1. You also installed the SecurityGateway on a second GAiA computer, which you plan to ship to another Administrator at a MegaCorp hub office. What is the correct order for pushing SICcertificates to the Gateway before shipping it?

A. 2, 3, 4, 1, 5B. 2, 1, 3, 4, 5C. 1, 3, 2, 4, 5D. 2, 3, 4, 5, 1



QUESTION 149Although SIC was already established and running, Joe reset SIC between the Security Management Server and a remote Gateway. He set a new activation key onthe Gateway's side with the command cpconfig and put in the same activation key in the Gateway's object on the Security Management Server. Unfortunately, SICcan not be established. What is a possible reason for the problem?


A. The installed policy blocks the communication.B. The old Gateway object should have been deleted and recreated.C. Joe forgot to exit from cpconfig.D. Joe forgot to reboot the Gateway.



QUESTION 150You want to reset SIC between smberlin and sgosaka.


In SmartDashboard, you choose sgosaka, Communication, Reset. On sgosaka, you start cpconfig, choose Secure Internal Communication and enter the new SICActivation Key. The screen reads The SIC was successfully initialized and jumps back to the cpconfig menu. When trying to establish a connection, instead of aworking connection, you receive this error message:


What is the reason for this behavior?

A. The Gateway was not rebooted, which is necessary to change the SIC key.B. You must first initialize the Gateway object in SmartDashboard (i.e., right-click on the object, choose Basic Setup > Initialize).C. The Check Point services on the Gateway were not restarted because you are still in the cpconfig utility.D. The activation key contains letters that are on different keys on localized keyboards.

Therefore, the activation can not be typed in a matching fashion.



QUESTION 151John is the Security Administrator in his company. He installs a new R77 Security Management Server and a new R77 Gateway. He now wants to establish SICbetween them. After entering the activation key, he gets the following message in SmartDashboard -

"Trust established ?

SIC still does not seem to work because the policy won't install and interface fetching does not work. What might be a reason for this?

A. SIC does not function over the network.B. It always works when the trust is establishedC. The Gateway's time is several days or weeks in the future and the SIC certificate is not yet valid.D. This must be a human error.



QUESTION 152The SIC certificate is stored in the directory _______________.


A. $CPDIR/registryB. $CPDIR/confC. $FWDIR/databaseD. $FWDIR/conf



QUESTION 153You run cpconfig to reset SIC on the Security Gateway. After the SIC reset operation is complete, the policy that will be installed is the:

A. Standard policy.B. Initial policy.C. Last policy that was installed.D. Default filter.



QUESTION 154Exhibit:


Chris has lost SIC communication with his Security Gateway and he needs to re-establish SIC. What would be the correct order of steps needed to perform thistask?

A. 5, 1, 2, 4B. 5, 1, 4, 2C. 3, 1, 4, 2D. 2, 3, 1, 4



QUESTION 155What happens when you open the Gateway object window Trusted Communication and press and confirm Reset?Exhibit:


A. Sic will be reset on the Gateway only.B. The Gateway certificate will be revoked on the Gateway only.C. The Gateway certificate will be revoked on the Security Managment Server only.D. The Gateway certificate will be revoked on the Security Management Server and SIC will be reset on the Gateway.




QUESTION 156Identity Awareness is implemented to manage access to protected resources based on a user's _____________.

A. Application requirementB. Computer MAC addressC. IdentityD. Time of connection



QUESTION 157Which of the following allows administrators to allow or deny traffic to or from a specific network based on the user's credentials?

A. Access PolicyB. Access RoleC. Access RuleD. Access Certificate



QUESTION 158John Adams is an HR partner in the ACME organization. ACME IT wants to limit access to HR servers to a set of designated IP addresses to minimize malwareinfection and unauthorized access risks. Thus, the gateway policy permits access only from John's desktop which is assigned a static IP address 10.0.0.19.He has received a new laptop and wants to access the HR Web Server from anywhere in the organization. The IT department gave the laptop a static IP address,but that limits him to operating it only from his desk. The current Rule Base contains a rule that lets John Adams access the HR Web Server from his laptop with astatic IP (10.0.0.19). He wants to move around the organization and continue to have access to the HR Web Server. To make this scenario work, the IT administrator:


1) Enables Identity Awareness on a gateway, selects AD Query as one of the Identity Sources, and installs the policy.2) Adds an access role object to the Firewall Rule Base that lets John Adams access the HR Web Server from any machine and from any location and installspolicy. John plugged in his laptop to the network on a different network segment and was not able to connect to the HR Web server. What is the next BESTtroubleshooting step?

A. Investigate this as a network connectivity issueB. Install the Identity Awareness AgentC. Set static IP to DHCPD. After enabling Identity Awareness, reboot the gateway



QUESTION 159John Adams is an HR partner in the ACME organization. ACME IT wants to limit access to HR servers to designated IP addresses to minimize malware infectionand unauthorized access risks. Thus, the gateway policy permits access only from John's desktop which is assigned an IP address 10.0.0.19 via DHCP.John received a laptop and wants to access the HR Web Server from anywhere in the organization. The IT department gave the laptop a static IP address, but thatlimits him to operating it only from his desk. The current Rule Base contains a rule that lets John Adams access the HR Web Server from his laptop. He wants tomove around the organization and continue to have access to the HR Web Server.To make this scenario work, the IT administrator:1) Enables Identity Awareness on a gateway, selects AD Query as one of the Identity Sources installs the policy.2) Adds an access role object to the Firewall Rule Base that lets John Adams PC access the HR Web Server from any machine and from any location.John plugged in his laptop to the network on a different network segment and he is not able to connect. How does he solve this problem?

A. John should install the Identity Awareness AgentB. The firewall admin should install the Security PolicyC. John should lock and unlock the computerD. Investigate this as a network connectivity issue




QUESTION 160John Adams is an HR partner in the ACME organization. ACME IT wants to limit access to HR servers to designated IP addresses to minimize malware infectionand unauthorized access risks. Thus, the gateway policy permits access only from John's desktop which is assigned a static IP address 10.0.0.19.John received a laptop and wants to access the HR Web Server from anywhere in the organization. The IT department gave the laptop a static IP address, but thatlimits him to operating it only from his desk. The current Rule Base contains a rule that lets John Adams access the HR Web Server from his laptop with a static IP(10.0.0.19). He wants to move around the organization and continue to have access to the HR Web Server.To make this scenario work, the IT administrator:1) Enables Identity Awareness on a gateway, selects AD Query as one of the Identity Sources installs the policy.2) Adds an access role object to the Firewall Rule Base that lets John Adams PC access the HR Web Server from any machine and from any location.What should John do when he cannot access the web server from a different personal computer?

A. John should lock and unlock his computerB. Investigate this as a network connectivity issueC. The access should be changed to authenticate the user instead of the PCD. John should install the Identity Awareness Agent



QUESTION 161Jennifer McHanry is CEO of ACME. She recently bought her own personal iPad. She wants use her iPad to access the internal Finance Web server. Because theiPad is not a member of the Active Directory domain, she cannot identify seamlessly with AD Query. However, she can enter her AD credentials in the CaptivePortal and then get the same access as on her office computer. Her access to resources is based on rules in the R77 Firewall Rule Base. To make this scenario work, the IT administrator must:1) Enable Identity Awareness on a gateway and select Captive Portal as one of the Identity Sources.2) In the Portal Settings window in the User Access section, make sure that Name and password login is selected.3) Create a new rule in the Firewall Rule Base to let Jennifer McHanry access network destinations. Select accept as the Action.Ms. McHanry tries to access the resource but is unable. What should she do?

A. Have the security administrator select the Action field of the Firewall Rule "Redirect HTTP connections to an authentication (captive) portal?B. Have the security administrator reboot the firewallC. Have the security administrator select Any for the Machines tab in the appropriate Access RoleD. Install the Identity Awareness agent on her iPad

Correct Answer: A


Section: Volume BExplanation


QUESTION 162When using LDAP as an authentication method for Identity Awareness, the query:

A. Requires client and server side software.B. Prompts the user to enter credentials.C. Requires administrators to specifically allow LDAP traffic to and from the LDAP Server and the Security Gateway.D. Is transparent, requiring no client or server side software, or client intervention.

Correct Answer: DSection: Volume CExplanation


QUESTION 163Which of the following firewall modes DOES NOT allow for Identity Awareness to be deployed?

A. BridgeB. Load SharingC. High AvailabilityD. Fail Open

Correct Answer: ASection: Volume CExplanation


QUESTION 164What happens if the identity of a user is known?


A. If the user credentials do not match an Access Role, the traffic is automatically dropped.B. If the user credentials do not match an Access Role, the system displays a sandbox.C. If the user credentials do not match an Access Role, the gateway moves onto the next rule.D. If the user credentials do not match an Access Role, the system displays the Captive Portal.

Correct Answer: CSection: Volume CExplanation


QUESTION 165What happens if the identity of a user is known?

A. If the user credentials do not match an Access Role, the system displays the Captive Portal.B. If the user credentials do not match an Access Role, the system displays a sandbox.C. If the user credentials do not match an Access Role, the traffic is automatically dropped.D. If the user credentials match an Access Role, the rule is applied and traffic is accepted or dropped based on the defined action.



QUESTION 166Which rule position in the Rule Base should hold the Cleanup Rule? Why?

A. First. It explicitly accepts otherwise dropped traffic.B. Last. It explicitly drops otherwise accepted traffic.C. Last. It serves a logging function before the implicit drop.D. Before last followed by the Stealth Rule.




QUESTION 167Which item below in a Security Policy would be enforced first?

A. IP spoofing/IP optionsB. Security Policy First ruleC. Administrator-defined Rule BaseD. Network Address Translation



QUESTION 168When you hide a rule in a Rule Base, how can you then disable the rule?

A. Hidden rules are already effectively disabled from Security Gateway enforcement.B. Right-click on the hidden rule place-holder bar and select Disable Rule(s).C. Right-click on the hidden rule place-holder bar and uncheck Hide, then right-click and select Disable Rule(s); re-hide the rule.D. Use the search utility in SmartDashboard to view all hidden rules. Select the relevant rule and click Disable Rule(s).



QUESTION 169A Cleanup rule:

A. logs connections that would otherwise be dropped without logging by default.B. drops packets without logging connections that would otherwise be dropped and logged by default.


C. logs connections that would otherwise be accepted without logging by default.D. drops packets without logging connections that would otherwise be accepted and logged by default.



QUESTION 170Which statement is TRUE about implicit rules?

A. You create them in SmartDashboard.B. The Gateway enforces implicit rules that enable outgoing packets only.C. Changes to the Security Gateway's default settings do not affect implicit rules.D. They are derived from Global Properties and explicit object properties.



QUESTION 171You have included the Cleanup Rule in your Rule Base. Where in the Rule Base should the Accept ICMP Requests implied rule have no effect?

A. LastB. After Stealth RuleC. FirstD. Before Last




QUESTION 172All of the following are Security Gateway control connections defined by default implied rules, EXCEPT:

A. Exclusion of specific services for reporting purposes.B. Acceptance of IKE and RDP traffic for communication and encryption purposes.C. Communication with server types, such as RADIUS, CVP, UFP, TACACS, and LDAP.D. Specific traffic that facilitates functionality, such as logging, management, and key exchange.



QUESTION 173In a distributed management environment, the administrator has removed all default check boxes from the Policy > Global Properties > Firewall tab. In order for theSecurity Gateway to send logs to the Security Management Server, an explicit rule must be created to allow the Security Gateway to communicate to the SecurityManagement Server on port ______.

A. 259B. 900C. 256D. 257



QUESTION 174A Security Policy has several database versions. What configuration remains the same no matter which version is used?

A. Objects_5_0.CB. Internal Certificate Authority (ICA) certificateC. Rule Bases_5_0.fws


D. fwauth.NDB

Correct Answer: BSection: Volume CExplanation


QUESTION 175You are working with multiple Security Gateways that enforce an extensive number of rules. To simplify security administration, which one of the following would youchoose to do?

A. Eliminate all possible contradictory rules such as the Stealth or Cleanup rules.B. Run separate SmartConsole instances to login and configure each Security Gateway directly.C. Create network objects that restrict all applicable rules to only certain networks.D. Create a separate Security Policy package for each remote Security Gateway.



QUESTION 176Which rules are not applied on a first-match basis?

A. User AuthenticationB. Client AuthenticationC. Session AuthenticationD. Cleanup




QUESTION 177Installing a policy usually has no impact on currently existing connections. Which statement is TRUE?


A. Users being authenticated by Client Authentication have to re-authenticate.B. All connections are reset, so a policy install is recommended during announced downtime only.C. All FTP downloads are reset; users have to start their downloads again.D. Site-to-Site VPNs need to re-authenticate, so Phase 1 is passed again after installing the Security Policy.



QUESTION 178Several Security Policies can be used for different installation targets. The firewall protecting Human Resources' servers should have a unique Policy Package.These rules may only be installed on this machine and not accidentally on the Internet firewall. How can this be configured?

A. When selecting the correct firewall in each line of the row Install On of the Rule Base, only this firewall is shown in the list of possible installation targets afterselecting Policy > Install.

B. A Rule Base can always be installed on any Check Point firewall object. It is necessary to select the appropriate target directly after selecting Policy > Install.C. In the SmartDashboard policy, select the correct firewall to be the Specific Target of the rule.D. A Rule Base is always installed on all possible targets. The rules to be installed on a firewall are defined by the selection in the row Install On of the Rule Base.




QUESTION 179A _______ rule is used to prevent all traffic going to the R77 Security Gateway.

A. IPSB. CleanupC. RejectD. Stealth



QUESTION 180In a distributed management environment, the administrator has removed the default check from Accept Control Connections under the Policy > Global Properties> FireWall tab. In order for the Security Management Server to install a policy to the Firewall, an explicit rule must be created to allow the server to communicate tothe Security Gateway on port ______.

A. 259B. 900C. 256D. 80



QUESTION 181To check the Rule Base, some rules can be hidden so they do not distract the administrator from the unhidden rules. Assume that only rules accepting HTTP orSSH will be shown. How do you accomplish this?

A. Ask your reseller to get a ticket for Check Point SmartUse and deliver him the Security Management Server cpinfo file.


B. In SmartDashboard, right-click in the column field Service > Query Column. Then, put the services HTTP and SSH in the list. Do the same in the field Action andselect Accept here.

C. In SmartDashboard menu, select Search > Rule Base Queries. In the window that opens, create a new Query, give it a name (e.g. "HTTP_SSH ?) and define aclause regarding the two services HTTP and SSH. When having applied this, define a second clause for the action Accept and combine them with the Booleanoperator AND.

D. This cannot be configured since two selections (Service, Action) are not possible.



QUESTION 182What CANNOT be configured for existing connections during a policy install?

A. Keep all connectionsB. Keep data connectionsC. Re-match connectionsD. Reset all connections



QUESTION 183What is the purpose of a Stealth Rule?

A. To prevent users from connecting directly to the gateway.B. To permit management traffic.C. To drop all traffic to the management server that is not explicitly permitted.D. To permit implied rules.

Correct Answer: ASection: Volume C


Explanation


QUESTION 184As you review this Security Policy, what changes could you make to accommodate Rule 4? Exhibit:

A. Remove the service HTTP from the column Service in Rule 4.B. Modify the column VPN in Rule 2 to limit access to specific traffic.C. Nothing at allD. Modify the columns Source or Destination in Rule 4.




QUESTION 185You review this Security Policy because Rule 4 is inhibited. Which Rule is responsible? Exhibit:

A. No rule inhibits Rule 4.B. Rule 1C. Rule 2D. Rule 3




QUESTION 186MegaCorp's security infrastructure separates Security Gateways geographically. You must request a central license for one remote Security Gateway. How do youapply the license?

A. Using the remote Gateway's IP address, and attaching the license to the remote Gateway via SmartUpdate.B. Using your Security Management Server's IP address, and attaching the license to the remote Gateway via SmartUpdate.C. Using the remote Gateway's IP address, and applying the license locally with the command cplic put.D. Using each of the Gateways' IP addresses, and applying the licenses on the Security Management Server with the command cprlic put.



QUESTION 187Identify the correct step performed by SmartUpdate to upgrade a remote Security Gateway. After selecting Packages > Distribute Only and choosing the targetGateway, the:

A. selected package is copied from the CD-ROM of the SmartUpdate PC directly to the Security Gateway and the installation IS performed.B. selected package is copied from the Package Repository on the Security Management Server to the Security Gateway and the installation IS performed.C. SmartUpdate wizard walks the Administrator through a distributed installation.D. selected package is copied from the Package Repository on the Security Management Server to the Security Gateway but the installation IS NOT performed.



QUESTION 188Identify the correct step performed by SmartUpdate to upgrade a remote Security Gateway. After selecting Packages > Distribute and Install Selected Package andchoosing the target Gateway, the:

A. selected package is copied from the Package Repository on the Security Management Server to the Security Gateway and the installation IS performed.B. SmartUpdate wizard walks the Administrator through a distributed installation.


C. selected package is copied from the Package Repository on the Security Management Server to the Security Gateway but the installation IS NOT performed.D. selected package is copied from the SmartUpdate PC CD-ROM directly to the Security Gateway and the installation IS performed.



QUESTION 189What physical machine must have access to the User Center public IP address when checking for new packages with SmartUpdate?

A. A Security Gateway retrieving the new upgrade packageB. SmartUpdate installed Security Management Server PCC. SmartUpdate GUI PCD. SmartUpdate Repository SQL database Server



QUESTION 190What action CANNOT be run from SmartUpdate R77?

A. Fetch sync statusB. Reboot GatewayC. Preinstall verifierD. Get all Gateway Data




QUESTION 191What mechanism does a gateway configured with Identity Awareness and LDAP initially use to communicate with a Windows 2003 or 2008 server?

A. WMIB. CIFSC. RCPD. LDAP



QUESTION 192Which of the following items should be configured for the Security Management Server to authenticate via LDAP?

A. Check Point PasswordB. Active Directory Server objectC. Windows logon passwordD. WMI object



QUESTION 193Which of the following items should be configured for the Security Management Server to authenticate using LDAP?

A. Login Distinguished Name and passwordB. Windows logon passwordC. Check Point PasswordD. WMI object




QUESTION 194Which of the following items should be configured for the Security Management Server to authenticate using LDAP?

A. Check Point PasswordB. WMI objectC. Domain Admin usernameD. Windows logon password



QUESTION 195Where does the security administrator activate Identity Awareness within SmartDashboard?

A. Gateway Object > General PropertiesB. Security Management Server > Identity AwarenessC. Policy > Global Properties > Identity AwarenessD. LDAP Server Object > General Properties



QUESTION 196How do you configure the Security Policy to provide user access to the Captive Portal through an external (Internet) interface?


A. Change the gateway settings to allow Captive Portal access via an external interface.B. No action is necessary. This access is available by default.C. Change the Identity Awareness settings under Global Properties to allow Captive Portal access on all interfaces.D. Change the Identity Awareness settings under Global Properties to allow Captive Portal access for an external interface.



QUESTION 197To qualify as an Identity Awareness enabled rule, which column MAY include an Access Role?

A. ActionB. SourceC. UserD. Track



QUESTION 198To qualify as an Identity Awareness enabled rule, which column MAY include an Access Role?

A. SourceB. TrackC. UserD. Action



Explanation


QUESTION 199What command with appropriate switches would you use to test Identity Awareness connectivity?

A. test_ldapB. test_ad_connectivityC. test_ldap_connectivityD. test_ad



QUESTION 200What command syntax would you use to see accounts the gateway suspects are service accounts?

A. pdp check_logB. pdp show serviceC. adlog check_accountsD. adlog a service_accounts



QUESTION 201What command syntax would you use to turn on PDP logging in a distributed environment?

A. pdp track=1


B. pdp tracker onC. pdp logging onD. pdp log=1



QUESTION 202Which of the following authentication methods can be configured in the Identity Awareness setup wizard?

A. TACACSB. Captive PortalC. Check Point PasswordD. Windows password



QUESTION 203Which of the following authentication methods can be configured in the Identity Awareness setup wizard?

A. Check Point PasswordB. TACACSC. LDAPD. Windows password




QUESTION 204What gives administrators more flexibility when configuring Captive Portal instead of LDAP query for Identity Awareness authentication?

A. Captive Portal is more secure than standard LDAPB. Nothing, LDAP query is required when configuring Captive PortalC. Captive Portal works with both configured users and guestsD. Captive Portal is more transparent to the user



QUESTION 205How granular may an administrator filter an Access Role with identity awareness? Per:


A. Specific ICA CertificateB. AD UserC. Radius GroupD. Windows Domain




QUESTION 206Can you use Captive Portal with HTTPS?

A. No, it only works with FTPB. No, it only works with FTP and HTTPC. YesD. No, it only works with HTTP



QUESTION 207Which of the following is NOT defined by an Access Role object?

A. Source NetworkB. Source MachineC. Source UserD. Source Server



QUESTION 208In which Rule Base can you implement an Access Role?

A. DLPB. Mobile AccessC. IPSD. Firewall




QUESTION 209Access Role objects define users, machines, and network locations as:

A. Credentialed objectsB. Linked objectsC. One objectD. Separate objects



QUESTION 210Where do you verify that UserDirectory is enabled?

A. Verify that Security Gateway > General Properties > Authentication > Use UserDirectory (LDAP) for Security Gateways is checkedB. Verify that Global Properties > Authentication > Use UserDirectory (LDAP) for Security Gateways is checkedC. Verify that Security Gateway > General Properties > UserDirectory (LDAP) > Use UserDirectory (LDAP) for Security Gateways is checkedD. Verify that Global Properties > UserDirectory (LDAP) > Use UserDirectory (LDAP) for Security Gateways is checked



QUESTION 211Which of the following statements is TRUE about management plug-ins?


A. A management plug-in interacts with a Security Management Server to provide new features and support for new products.B. Installing a management plug-in is just like an upgrade process.C. Using a plug-in offers full central management only if special licensing is applied to specific features of the plug-in.D. The plug-in is a package installed on the Security Gateway.



QUESTION 212You are installing a Security Management Server. Your security plan calls for three administrators for this particular server. How many can you create duringinstallation?

A. OneB. Only one with full access and one with read-only accessC. As many as you wantD. Depends on the license installed on the Security Management Server



QUESTION 213During which step in the installation process is it necessary to note the fingerprint for first-time verification?

A. When configuring the Gateway in the WebUIB. When configuring the Security Management Server using cpconfigC. When establishing SIC between the Security Management Server and the GatewayD. When configuring the Security Gateway object in SmartDashboard

Correct Answer: B


Section: Volume CExplanation


QUESTION 214How can you most quickly reset Secure Internal Communications (SIC) between a Security Management Server and Security Gateway?

A. From cpconfig on the Gateway, choose the Secure Internal Communication option and retype the activation key. Next, retype the same key in the Gatewayobject in SmartDashboard and reinitialize Secure Internal Communications (SIC).

B. Use SmartUpdate to retype the Security Gateway activation key. This will automatically sync SIC to both the Security Management Server and Gateway.C. From the Security Management Server's command line, type fw putkey -p <shared key> <IP Address of Security Gateway>.D. Run the command fwm sic_reset to reinitialize the Security Management Server Internal Certificate Authority (ICA). Then retype the activation key on the

Security Gateway from SmartDashboard.



QUESTION 215How can you recreate the Security Administrator account, which was created during initial Management Server installation on GAiA?

A. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete the Administrator Account portion of the file. You will beprompted to create a new account.

B. Type cpm -a, and provide the existing Administrator's account name. Reset the Security Administrator's password.C. Launch cpconfig and delete the Administrator's account. Recreate the account with the same name.D. Launch SmartDashboard in the User Management screen, and delete the cpconfig administrator.




QUESTION 216The London Security Gateway Administrator has just installed the Security Gateway and Management Server. He has not changed any default settings. As he triesto configure the Gateway, he is unable to connect.

Which troubleshooting suggestion will NOT help him?

A. Check if some intermediate network device has a wrong routing table entry, VLAN assignment, duplex-mismatch, or trunk issue.B. Test the IP address assignment and routing settings of the Security Management Server, Gateway, and console client.C. Verify the SIC initialization.D. Verify that the Rule Base explicitly allows management connections.




QUESTION 217You need to completely reboot the Operating System after making which of the following changes on the Security Gateway? (i.e. the command cprestart is notsufficient.)1. Adding a hot-swappable NIC to the Operating System for the first time.2. Uninstalling the R77 Power/UTM package.3. Installing the R77 Power/UTM package.4. Re-establishing SIC to the Security Management Server.5. Doubling the maximum number of connections accepted by the Security Gateway.

A. 3 onlyB. 1, 2, 3, 4, and 5C. 2, 3 onlyD. 3, 4, and 5 only



QUESTION 218The Security Gateway is installed on GAiA R77 The default port for the Web User Interface is _______.

A. TCP 18211B. TCP 443C. TCP 4433D. TCP 257



QUESTION 219


Over the weekend, an Administrator without access to SmartDashboard installed a new R77 Security Gateway using GAiA. You want to confirm communicationbetween the Gateway and the Management Server by installing the Security Policy. What might prevent you from installing the Policy?

A. You have not established Secure Internal Communications (SIC) between the Security Gateway and Management Server. You must initialize SIC on both theSecurity Gateway and the Management Server.

B. You first need to run the command fw unloadlocal on the new Security Gateway.C. You first need to initialize SIC in SmartUpdate.D. You have not established Secure Internal Communications (SIC) between the Security Gateway and Management Server. You must initialize SIC on the

Security Management Server.



QUESTION 220An Administrator without access to SmartDashboard installed a new IPSO-based R77 Security Gateway over the weekend. He e-mailed you the SIC activation key.You want to confirm communication between the Security Gateway and the Management Server by installing the Policy. What might prevent you from installing thePolicy?

A. An intermediate local Security Gateway does not allow a policy install through it to the remote new Security Gateway appliance. Resolve by running thecommand fw unloadlocal on the local Security Gateway.

B. You first need to run the command fw unloadlocal on the R77 Security Gateway appliance in order to remove the restrictive default policy.C. You first need to create a new Gateway object in SmartDashboard, establish SIC via the Communication button, and define the Gateway's topology.D. You have not established Secure Internal Communications (SIC) between the Security Gateway and Management Server. You must initialize SIC on the

Security Management Server.



QUESTION 221How can you reset the Security Administrator password that was created during initial Security Management Server installation on GAiA?


A. Launch SmartDashboard in the User Management screen, and edit the cpconfig administrator.B. As expert user Type fwm -a, and provide the existing administrator's account name. Reset the Security Administrator's password.C. Type cpm -a, and provide the existing administrator's account name. Reset the Security Administrator's password.D. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete the Password portion of the file. Then log in to the

account without a password. You will be prompted to assign a new password.



QUESTION 222You have configured SNX on the Security Gateway. The client connects to the Security Gateway and the user enters the authentication credentials. What musthappen after authentication that allows the client to connect to the Security Gateway's VPN domain?

A. SNX modifies the routing table to forward VPN traffic to the Security Gateway.B. An office mode address must be obtained by the client.C. The SNX client application must be installed on the client.D. Active-X must be allowed on the client.



QUESTION 223The Tokyo Security Management Server Administrator cannot connect from his workstation in Osaka.


Which of the following lists the BEST sequence of steps to troubleshoot this issue?

A. Check for matching OS and product versions of the Security Management Server and the client. Then, ping the Gateways to verify connectivity. If successful,scan the log files for any denied management packets.

B. Verify basic network connectivity to the local Gateway, service provider, remote Gateway, remote network and target machine. Then, test for firewall rules thatdeny management access to the target. If successful, verify that pcosaka is a valid client IP address.

C. Check the allowed clients and users on the Security Management Server. If pcosaka and your user account are valid, check for network problems. If there areno network related issues, this is likely to be a problem with the server itself. Check for any patches and upgrades. If still unsuccessful, open a case withTechnical Support.

D. Call Tokyo to check if they can ping the Security Management Server locally. If so, login to sgtokyo, verify management connectivity and Rule Base. If this looksokay, ask your provider if they have some firewall rules that filters out your management traffic.



QUESTION 224Where is the fingerprint generated, based on the output display? Exhibit:


A. SmartConsoleB. SmartUpdateC. Security Management ServerD. SmartDashboard




QUESTION 225Match the following commands to their correct function. Each command has one function only listed.Exhibit:

A. C1>F6; C2>F4; C3>F2; C4>F5B. C1>F2; C2>F1; C3>F6; C4>F4C. C1>F2; C2>F4; C3>F1; C4>F5D. C1>F4; C2>F6; C3>F3; C4>F2



QUESTION 226Which command displays the installed Security Gateway version?

A. fw printverB. fw verC. fw stat


D. cpstat -gw



QUESTION 227Which command line interface utility allows the administrator to verify the Security Policy name and timestamp currently installed on a firewall module?

A. cpstat fwdB. fw verC. fw statD. fw ctl pstat



QUESTION 228Suppose the Security Gateway hard drive fails and you are forced to rebuild it. You have a snapshot file stored to a TFTP server and backups of your SecurityManagement Server. What is the correct procedure for rebuilding the Gateway quickly?

A. Reinstall the base operating system (i.e., GAiA). Configure the Gateway interface so that the Gateway can communicate with the TFTP server. Revert to thestored snapshot image, and install the Security Policy.

B. Run the command revert to restore the snapshot, establish SIC, and install the Policy.C. Run the command revert to restore the snapshot. Reinstall any necessary Check Point products. Establish SIC and install the Policy.D. Reinstall the base operating system (i.e., GAia). Configure the Gateway interface so that the Gateway can communicate with the TFTP server. Reinstall any

necessary Check Point products and previously applied hotfixes. Revert to the stored snapshot image, and install the Policy.




QUESTION 229Which of the following statements accurately describes the command upgrade_export?

A. upgrade_export stores network-configuration data, objects, global properties, and the database revisions prior to upgrading the Security Management Server.B. Used primarily when upgrading the Security Management Server, upgrade_export stores all object databases and the /conf directories for importing to a newer

Security Gateway version.C. upgrade_export is used when upgrading the Security Gateway, and allows certain files to be included or excluded before exporting.D. This command is no longer supported in GAiA.



QUESTION 230What are you required to do before running the command upgrade_export?

A. Run a cpstop on the Security Gateway.B. Run a cpstop on the Security Management Server.C. Close all GUI clients.D. Run cpconfig and set yourself up as a GUI client.



QUESTION 231A snapshot delivers a complete GAiA backup. The resulting file can be stored on servers or as a local file in /var/CPsnapshot/snapshots. How do you restore a localsnapshot named MySnapshot.tgz?

A. Reboot the system and call the start menu. Select the option Snapshot Management, provide the Expert password and select [L] for a restore from a local file.


Then, provide the correct file name.B. As expert user, type the command snapshot -r MySnapshot.tgz.C. As expert user, type the command revert --file MySnapshot.tgz.D. As expert user, type the command snapshot - R to restore from a local file. Then, provide the correct file name.



QUESTION 232What is the primary benefit of using the command upgrade_export over either backup or snapshot?

A. upgrade_export is operating system independent and can be used when backup or snapshot is not available.B. upgrade_export will back up routing tables, hosts files, and manual ARP configurations, where backup and snapshot will not.C. The commands backup and snapshot can take a long time to run whereas upgrade_export will take a much shorter amount of time.D. upgrade_export has an option to back up the system and SmartView Tracker logs while backup and snapshot will not.



QUESTION 233What is the syntax for uninstalling a package using newpkg?

A. -u <pathname of package>B. -i <full pathname of package>C. -S <pathname of package>D. newpkg CANNOT be used to uninstall a package




QUESTION 234Your primary Security Gateway runs on GAiA. What is the easiest way to back up your Security Gateway R77 configuration, including routing and networkconfiguration files?

A. Copying the directories $FWDIR/conf and $FWDIR/lib to another location.B. Using the native GAiA backup utility from command line or in the Web based user interface.C. Using the command upgrade_export.D. Run the pre_upgrade_verifier and save the .tgz file to the directory /temp.



QUESTION 235You need to back up the routing, interface, and DNS configuration information from your R77 GAiA Security Gateway. Which backup-and-restore solution do youuse?

A. Manual copies of the directory $FWDIR/confB. GAiA back up utilitiesC. upgrade_export and upgrade_import commandsD. Database Revision Control



QUESTION 236You are running a R77 Security Gateway on GAiA. In case of a hardware failure, you have a server with the exact same hardware and firewall version installed.What back up method could be used to quickly put the secondary firewall into production?


A. manual backupB. upgrade_exportC. backupD. snapshot



QUESTION 237Before upgrading SecurePlatform to GAiA, you should create a backup. To save time, many administrators use the command backup. This creates a backup of theCheck Point configuration as well as the system configuration.An administrator has installed the latest HFA on the system for fixing traffic problem after creating a backup file. There is a mistake in the very complex staticrouting configuration. The Check Point configuration has not been changed. Can the administrator use a restore to fix the errors in static routing?

A. The restore is not possible because the backup file does not have the same build number (version).B. The restore is done by selecting Snapshot Management from the boot menu of GAiA.C. The restore can be done easily by the command restore and copying netconf.C from the production environment.D. A backup cannot be restored, because the binary files are missing.



QUESTION 238Which operating systems are supported by a Check Point Security Gateway on an open server? Select MOST complete list.

A. Sun Solaris, Red Hat Enterprise Linux, Check Point SecurePlatform, IPSO, Microsoft WindowsB. Check Point GAiA and SecurePlatform, and Microsoft WindowsC. Check Point GAiA, Microsoft Windows, Red Hat Enterprise Linux, Sun Solaris, IPSOD. Check Point GAiA and SecurePlatform, IPSO, Sun Solaris, Microsoft Windows

Correct Answer: B




QUESTION 239You intend to upgrade a Check Point Gateway from R71 to R77. Prior to upgrading, you want to back up the Gateway should there be any problems with theupgrade. Which of the following allows for the Gateway configuration to be completely backed up into a manageable size in the least amount of time?

A. database revisionB. snapshotC. upgrade_exportD. backup



QUESTION 240An advantage of using central instead of local licensing is:

A. A license can be taken from one Security Management Server and given to another Security Management Server.B. Only one IP address is used for all licenses.C. The license must be renewed when changing the IP address of a Security Gateway. Each module's license has a unique IP address.D. Licenses are automatically attached to their respective Security Gateways.



QUESTION 241You are running the license_upgrade tool on your GAiA Gateway. Which of the following can you NOT do with the upgrade tool?


A. Perform the actual license-upgrade processB. Simulate the license-upgrade processC. View the licenses in the SmartUpdate License RepositoryD. View the status of currently installed licenses



QUESTION 242If a SmartUpdate upgrade or distribution operation fails on GAiA, how is the system recovered?

A. The Administrator can only revert to a previously created snapshot (if there is one) with the command cprinstall snapshot <object name> <filename>.B. The Administrator must reinstall the last version via the command cprinstall revert <object name> <file name>.C. The Administrator must remove the rpm packages manually, and re-attempt the upgrade.D. GAiA will reboot and automatically revert to the last snapshot version prior to upgrade.



QUESTION 243Why should the upgrade_export configuration file (.tgz) be deleted after you complete the import process?

A. SmartUpdate will start a new installation process if the machine is rebooted.B. It will prevent a future successful upgrade_export since the .tgz file cannot be overwritten.C. It contains your security configuration, which could be exploited.D. It will conflict with any future upgrades when using SmartUpdate.

Correct Answer: CSection: Volume C


Explanation


QUESTION 244Which of these components does NOT require a Security Gateway R77 license?


A. Security Management ServerB. Check Point GatewayC. SmartConsoleD. SmartUpdate upgrading/patching



QUESTION 245If a Security Gateway enforces three protections, LDAP Injection, Malicious Code Protector, and Header Rejection, which Check Point license is required inSmartUpdate?

A. IPSB. SSL: VPNC. SmartEvent IntroD. Data Loss Prevention



Explanation


QUESTION 246Central license management allows a Security Administrator to perform which of the following functions?

1. Check for expired licenses.2. Sort licenses and view license properties.3. Attach both R77 Central and Local licesnes to a remote module.4. Delete both R77 Local Licenses and Central licenses from a remote module.5. Add or remove a license to or from the license repository.6. Attach and/or delete only R77 Central licenses to a remote module (not Local licenses).

A. 1, 2, 5, & 6B. 2, 3, 4, & 5C. 2, 5, & 6D. 1, 2, 3, 4, & 5



QUESTION 247Which command gives an overview of your installed licenses?

A. cplicenseB. showlicC. fw lic printD. cplic print




QUESTION 248Where are SmartEvent licenses installed?

A. SmartEvent serverB. Log ServerC. Security Management ServerD. Security Gateway



QUESTION 249ALL of the following options are provided by the GAiA sysconfig utility, EXCEPT:

A. Export setupB. DHCP Server configurationC. Time & DateD. GUI Clients



QUESTION 250Which of the following options is available with the GAiA cpconfig utility on a Management Server?

A. Export setupB. DHCP Server configurationC. GUI ClientsD. Time & Date




QUESTION 251Which command would provide the most comprehensive diagnostic information to Check Point Technical Support?

A. fw cpinfoB. cpinfo -o date.cpinfo.txtC. diagD. cpstat - date.cpstat.txt



QUESTION 252How can you check whether IP forwarding is enabled on an IP Security Appliance?

A. clish -c show routing active enableB. cat /proc/sys/net/ipv4/ip_forwardC. echo 1 > /proc/sys/net/ipv4/ip_forwardD. ipsofwd list



QUESTION 253


Which command allows you to view the contents of an R77 table?

A. fw tab -a <tablename>B. fw tab -t <tablename>C. fw tab -s <tablename>D. fw tab -x <tablename>



QUESTION 254Which of the following tools is used to generate a Security Gateway R77 configuration report?

A. fw cpinfoB. infoCPC. cpinfoD. infoview



QUESTION 255Which of the following is a CLI command for Security Gateway R77?

A. fw tab -uB. fw shutdownC. fw mergeD. fwm policy_print <policyname>

Correct Answer: A




QUESTION 256You are the Security Administrator for MegaCorp. A Check Point firewall is installed and in use on a platform using GAiA. You have trouble configuring the speedand duplex settings of your Ethernet interfaces. Which of the following commands can be used in CLISH to configure the speed and duplex settings of an Ethernetinterface and will survive a reboot? Give the BEST answer.

A. ethtoolB. set interface <options>C. mii_toolD. ifconfig -a



QUESTION 257Which command enables IP forwarding on IPSO?

A. ipsofwd on adminB. echo 0 > /proc/sys/net/ipv4/ip_forwardC. clish -c set routing active enableD. echo 1 > /proc/sys/net/ipv4/ip_forward



QUESTION 258


Which of the following objects is a valid source in an authentication rule?

A. Host@AnyB. User@NetworkC. User_group@NetworkD. User@Any



QUESTION 259You find that Users are not prompted for authentication when they access their Web servers, even though you have created an HTTP rule via User Authentication.Choose the BEST reason why.

A. You checked the cache password on desktop option in Global Properties.B. Another rule that accepts HTTP without authentication exists in the Rule Base.C. You have forgotten to place the User Authentication Rule before the Stealth Rule.D. Users must use the SecuRemote Client, to use the User Authentication Rule.



QUESTION 260Which authentication type requires specifying a contact agent in the Rule Base?

A. Client Authentication with Partially Automatic Sign OnB. Client Authentication with Manual Sign OnC. User AuthenticationD. Session Authentication

Correct Answer: D


Section: Volume DExplanation


QUESTION 261What is the difference between Standard and Specific Sign On methods?

A. Standard Sign On allows the user to be automatically authorized for all services that the rule allows. Specific Sign On requires that the user re-authenticate foreach service specifically defined in the window Specific Action Properties.

B. Standard Sign On allows the user to be automatically authorized for all services that the rule allows, but re-authenticate for each host to which he is trying toconnect. Specific Sign On requires that the user re-authenticate for each service.

C. Standard Sign On allows the user to be automatically authorized for all services that the rule allows. Specific Sign On requires that the user re-authenticate foreach service and each host to which he is trying to connect.

D. Standard Sign On requires the user to re-authenticate for each service and each host to which he is trying to connect. Specific Sign On allows the user to signon only to a specific IP address.

Correct Answer: CSection: Volume DExplanation


QUESTION 262Which set of objects have an Authentication tab?

A. Templates, UsersB. Users, NetworksC. Users, User GroupsD. Networks, Hosts

Correct Answer: ASection: Volume DExplanation



QUESTION 263How are cached usernames and passwords cleared from the memory of a R77 Security Gateway?

A. By using the Clear User Cache button in SmartDashboard.B. Usernames and passwords only clear from memory after they time out.C. By retrieving LDAP user information using the command fw fetchldap.D. By installing a Security Policy.

Correct Answer: DSection: Volume DExplanation


QUESTION 264Your users are defined in a Windows 2008 R2 Active Directory server. You must add LDAP users to a Client Authentication rule. Which kind of user group do youneed in the Client Authentication rule in R77?

A. External-user groupB. LDAP groupC. A group with a generic userD. All Users

Correct Answer: BSection: Volume DExplanation


QUESTION 265Assume you are a Security Administrator for ABCTech. You have allowed authenticated access to users from Mkting_net to Finance_net. But in the user'sproperties, connections are only permitted within Mkting_net. What is the BEST way to resolve this conflict?

A. Select Ignore Database in the Action Properties window.B. Permit access to Finance_net.C. Select Intersect with user database in the Action Properties window.D. Select Intersect with user database or Ignore Database in the Action Properties window.




QUESTION 266For remote user authentication, which authentication scheme is NOT supported?

A. Check Point PasswordB. RADIUSC. TACACSD. SecurID



QUESTION 267Review the rules.

Assume domain UDP is enabled in the impled rules.

What happens when a user from the internal network tries to browse to the internet using HTTP? The user:

A. can connect to the Internet successfully after being authenticated.B. is prompted three times before connecting to the Internet successfully.


C. can go to the Internet after Telnetting to the client authentication daemon port 259.D. can go to the Internet, without being prompted for authentication.



QUESTION 268Study the Rule base and Client Authentication Action properties screen -


After being authenticated by the Security Gateway, when a user starts an HTTP connection to a Web site, the user tries to FTP to another site using the command


line. What happens to the user?

A. user is prompted for authentication by the Security Gateway again.B. FTP data connection is dropped after the user is authenticated successfully.C. user is prompted to authenticate from that FTP site only, and does not need to enter his username and password for Client Authentication.D. FTP connection is dropped by Rule 2.


Explanation/Reference:Manual Users must use either telnet to port 259 on the firewall, or use a Web browser to connect to port 900 on the firewall to authenticate before being grantedaccess.# Partially Automatic If user authentication is configured for the service the user is attempting to access and they pass this authentication, then no further clientauthentication is required. For example, if HTTP is permitted on a client authentication rule, the user will be able to transparently authenticate since FireWall-1 has asecurity server for HTTP.Then, if this setting is chosen, users will not have to manually authenticate for this connection. Note that this applies to all services forwhich FireWall-1 has built-in security servers (HTTP, FTP, telnet, and rlogin). # Fully Automatic If the client has the session authentication agent installed, then nofurther client authentication is required (see session authentication below). For HTTP, FTP, telnet, or rlogin, the firewall will authenticate via user authentication, andthen session authentication will be used to authenticate all other services.http://www.syngress.comFigure 6.19 Client Authentication Action Properties 278 Chapter 6 · Authenticating Users# Agent Automatic Sign On Uses session authentication agent to provide transparent authentication (see session authentication below). # Single Sign-On System Used in conjunction with UserAuthority servers to provide enhanced application level security. Discussion of UserAuthority is beyond thescope of this book.

QUESTION 269One of your remote Security Gateway's suddenly stops sending logs, and you cannot install the Security Policy on the Gateway. All other remote Security Gatewaysare logging normally to the Security Management Server, and Policy installation is not affected. When you click the Test SIC status button in the problematicGateway object, you receive an error message. What is the problem?

A. The remote Gateway's IP address has changed, which invalidates the SIC Certificate.B. The time on the Security Management Server's clock has changed, which invalidates the remote Gateway's Certificate.C. The Internal Certificate Authority for the Security Management Server object has been removed from objects_5_0.C.D. There is no connection between the Security Management Server and the remote Gateway.

Rules or routing may block the connection.

Correct Answer: DSection: Volume D


Explanation


QUESTION 270What information is found in the SmartView Tracker Management log?

A. SIC revoke certificate eventB. Destination IP addressC. Most accessed Rule Base ruleD. Number of concurrent IKE negotiations



QUESTION 271What information is found in the SmartView Tracker Management log?

A. Historical reports logB. Policy rule modification date/time stampC. Destination IP addressD. Most accessed Rule Base rule



QUESTION 272Which port must be allowed to pass through enforcement points in order to allow packet logging to operate correctly?

A. 514


B. 257C. 256D. 258



QUESTION 273You are the Security Administrator for MegaCorp and would like to view network activity using SmartReporter. You select a standard predefined report. As you cansee here, you can select the london Gateway.


When you attempt to configure the Express Report, you are unable to select this Gateway.


What is the reason for this behavior? Give the BEST answer.

A. You must enable the Eventia Express Mode on the london Gateway.B. You have the license for Eventia Reporter in Standard mode only.C. You must enable the Express Mode inside Eventia Reporter.D. You must enable Monitoring in the london Gateway object's General Properties.



QUESTION 274


In SmartView Tracker, which rule shows when a packet is dropped due to anti-spoofing?

A. Rule 0B. Blank field under Rule NumberC. Rule 1D. Cleanup Rule



QUESTION 275A third-shift Security Administrator configured and installed a new Security Policy early this morning. When you arrive, he tells you that he has been receivingcomplaints that Internet access is very slow. You suspect the Security Gateway virtual memory might be the problem. Which SmartConsole component would youuse to verify this?

A. Eventia AnalyzerB. SmartView TrackerC. SmartView MonitorD. This information can only be viewed with the command fw ctl pstat from the CLI.



QUESTION 276You find a suspicious connection from a problematic host. You decide that you want to block everything from that whole network, not just the problematic host. Youwant to block this for an hour while you investigate further, but you do not want to add any rules to the Rule Base. How do you achieve this?

A. Use dbedit to script the addition of a rule directly into the Rule Bases_5_0.fws configuration file.B. Select Block intruder from the Tools menu in SmartView Tracker.C. Create a Suspicious Activity Rule in SmartView Monitor.D. Add a temporary rule using SmartDashboard and select hide rule.




QUESTION 277In SmartDashboard, you configure 45 MB as the required free hard-disk space to accommodate logs. What can you do to keep old log files, when free space fallsbelow 45 MB?

A. Do nothing. Old logs are deleted, until free space is restored.B. Use the command fwm logexport to export the old log files to another location.C. Configure a script to run fw logswitch and SCP the output file to a separate file server.D. Do nothing. The Security Management Server automatically copies old logs to a backup server before purging.



QUESTION 278How do you configure an alert in SmartView Monitor?

A. An alert cannot be configured in SmartView Monitor.B. By choosing the Gateway, and Configure Thresholds.C. By right-clicking on the Gateway, and selecting Properties.D. By right-clicking on the Gateway, and selecting System Information.




QUESTION 279True or FalsE. SmartView Monitor can be used to create alerts on a specified Gateway.

A. True, by right-clicking on the Gateway and selecting Configure Thresholds.B. True, by choosing the Gateway and selecting System Information.C. False, an alert cannot be created for a specified Gateway.D. False, alerts can only be set in SmartDashboard Global Properties.




Documents

156-215.77 checkpoint - GRATIS EXAM · PDF file156-215.77 checkpoint Number : 156-215.77 Passing Score : 800 ... - Configure the GAiA back up utility to back up the Security Gateways