1st ACOME Program

1

PROGRAM SCHEDULE (general) Please note that the program schedule is still subjected to changes

+ 14 August 2012 GENERAL SESSION (8:00 – 11:30) - Location: Main auditorium (1st floor), Building A, Ton Duc Thang University

+ 8:00 – 9:00 : On-site registration & Music performance + 9:00 – 9:35 : Opening remarks + 9:35 – 10:00 : Coffee break + 10:00 – 11:30 : 2 plenary speakers

LUNCH BUFFER (12:00 – 13:30) - Location: outside the main auditorium (1st floor), Building A. 3 PARALLEL SESSIONS (13:30 – 17:10) - SESSION A1

Location: Room A104 (1st floor), Building A + 13:30 – 15:00: 3 presentations (including 1 keynote speaker) + 15:00 – 15:30: Coffee break + 15:30 – 17:10: 4 presentations

- SESSION B1 Location: Meeting room B (Ground floor), Building B

+ 13:30 – 15:10: 4 presentations + 15:10 – 15:30: Coffee break + 15:30 – 16:55: 3 presentations

- SESSION C1 Location: Meeting room C (Ground floor), Building C


+ 15 August 2012 GENERAL SESSION (8:00 – 10:00) - Location: Main auditorium (1st floor), Building A

+ 8:00 – 9:30: 2 plenary presentations + 9:30 – 10:00: Coffee break

3 PRESENTATIONS AT SESSIONS (10:00 – 11:45) - SESSION A2

Location: Room A104 (1st floor), Building A + 10:00 – 11:45: 3 presentations (including 2 keynote speakers)

- SESSION B2

2

Location: Meeting room B (Ground floor), Building B + 10:00 – 11:40: 4 presentations


+ 10:00 – 11:40: 4 presentations LUNCH BUFFER (12:00 – 13:30) - Locations: outside the session rooms (A104, Meeting room B, Meeting room C). 3 PARALLEL SESSIONS (13:30 – 17:25) - SESSION A3

Location: Room A104 (1st floor), Building A + 13:30 – 15:00: 3 presentations (including 1 keynote speaker) + 15:00 – 15:30: Coffee break + 15:30 – 17:25: 4 presentations (including 1 keynote speaker)





GALA DINNER (19:00 – 21:30) - Location: Hall Event, Kim Do Hotel, 133 Nguyen Hue Street, District 1 + 16 August 2012 3 PARALLEL SESSIONS (8:00 – 11:15) - SESSION A4

Location: Room A104 (1st floor), Building A, Ton Duc Thang University + 8:00 – 9:30: 3 presentations (including 1 keynote speaker) + 9:30 – 10:00: Coffee break + 10:00 – 11:15: 3 presentations




3

+ 8:00 – 9:30: 3 oral presentations + 9:30 – 10:00: Coffee break + 10:00 – 11:15: 3 oral presentations

GENERAL SESSION (11:30 – 12:00) - Location: Main auditorium (1st floor), Building A

+ 11:30 –12:00: Closing remarks by ACOME chairman

LUNCH BUFFER (12:00 – 13:30) - Location: outside the session rooms (A104, the meeting room B, the meeting room C).

17 August 2012

+ Travel and visit HoChiMinh city and Nha Trang

4

PROGRAM SCHEDULE (in details)

+ 14 August 2012

GENERAL SESSION (8:00 – 11:30)

Location: Main auditorium (1st floor), Building A, Ton Duc Thang University

Time Content (Title) Speaker Affiliation

8:00-8:30 On-site registration Receptionists Ton Duc Thang University

8:30-9:00 Music Performance Singers

8:30-8:50 President of TDT University receives 10 scientists (Plenary + Keynote speakers)

9:00-9:15 Welcome Statement and Introduction of Guests

MC Ton Duc Thang University

9:15-9:20 Opening address by ACOME Chairman Prof. Nguyen Thien Tong

Ton Duc Thang University

9:20-9:25 Opening address by President of TDT University

Prof. Le Vinh Danh Ton Duc Thang University

9:25-9:30 Opening address by the Representative of NAFOSTED and Ministry of Science and Technology

Representative of NAFOSTED and or Ministry of Science and Technology

9:30-9:35 Opening address by President of Vietnam General Confederation of Labour

Dr. Dang Ngoc Tung President of Vietnam General Confederation of Labour

9:35-10:00 Coffee break

Scientific Program (Chairs: Nguyen Thien Tong & Nguyen Dang Hung)

10:00-10:45 Mechanical characterization of materials and diagnosis of structures by inverse analyses: Some innovative procedures and applications.

Giulio Maier (Plenary speaker)

Polytechnique University of Milano, Italy

10:45-11:30

Archetype-blending continuum (ABC) theory

Wing Kam Liu (Plenary speaker)

Northwestern University, USA

LUNCH BUFFER (12:00 – 13:30)

Location: outside the main auditorium (1st floor), Building A.

5

3 PARALLEL SESSIONS (13:30 -17:25)

SESSION A1: 14 August 2012 Location: Room A104 (1st floor), Building A


Session Chairs: Dang Van Ky & Claude Stolz (Computational Fracture and Damage Mechanics)

13:30-14:10 New methods in fatigue of structures Dang Van Ky (Keynote speaker)

Ecole Polytechnique, Paris, France

14:10-14:35 On the rate boundary value problem for damage modelization by thick level-set

Claude Stolz Ecole Polytechnique, Paris, France

14:35 - 15:00 Evaluation of strain energy based damage indices for flexural crack detection of RC beams

David P. Thambiratnam

Queensland University of Technology, Australia

15:00 -15:30 Coffee break

Session Chairs: Wing Kam Liu & Alexander M. Korsunsky (Computational Mechanics of Materials and Structures)

15:30 - 15:55 Plastic collapse mechanisms in thin disks subject to thermo-mechanical loading

Sergei Alexandrov

A. Ishlinskii Institute for Problems in Mechanics, Russia

15:55 - 16:20 Homogenization towards a gradient plasticity model – from meso to macro

Leong Hien Poh National University of Singapore, Singapore

16:20- 16:45 A gradient-damage model for viscoplastic plates under impulsive loadings: Experimental and computational aspects

Nguyen An Danh Institute of General Mechanics, RWTH-Aachen, Germany

16:45- 17:10 Multi-scale model to predict the ballistic impact behavior of multi-layer plain-woven fabrics

Ha Minh Cuong Laboratory of Lille, CNRS UMR 8107, University of Lille, France

SESSION B1: 14 August 2012 Location: Meeting room B (Ground floor), Building B


Session Chairs: Nguyen Thien Tong & Sergei Alexandrov (Computational Fluid Mechanics)

13:30-13:55 A recent Eulerian-Lagrangian CFD methodology for modelling direct injection diesel sprays

Khuong Anh Dung

Polytechnique University of Valencia, Spain

13:55-14:20 Effect of sediments and icebergs on Truong Hoang Research Engineer, Westminster,

6

tsunamis Vinh Phuong USA

14:20 - 14:55 CFD aerodynamic analysis of 5 MW wind turbine considering wind shear and yaw error

Tran Thanh Toan

Gyeongsang National University, Korea

14:55-15:10 Calculation of longshore sediment transport in the swash zone with application to shoreline change modeling

Le Xuan Hoan Toyohashi University of Technology, Japan


Session Chairs: David P. Thambiratnam & Nguyen Dinh Kien (Computational Solids and Structural Mechanics)

15:30 - 15:55 Analytical expressions of buckling loads for two-layer Timoshenko members with interlayer slips

Nguyen Quang Huy

Structural Engineering Research Group, INSA de Rennes, France

15:55 - 16:20 Diagnosis of beam-damage location using neural networks and wavelet analysis

Nguyen Sy Dzung

Inha University, Korea

16:20 - 16:55 Large deflection analysis of functionally graded Euler-Bernoulli beams with variable cross section

Nguyen Dinh Kien

Institute of Mechanics, Vietnam

SESSION C1: 14 August 2012 Location: Meeting room C (Ground floor), Building C


Session Chairs: Pham Duc Chinh & Sofia A. Alisjahbana (Computational Solids and Fluid Mechanics)

13:30-13:55 Blast loaded stiffened orthotropic concrete plates

Sofia W. Alisjahbana

Bakrie University, Indonesia

13:55-14:20 Impact and compression after impact behavior prediction of variable angled tow laminates

Dang Dinh Thi

Advanced Composite Centre for Innovation and Science (ACCIS), Queen’s Building, University Walk, BS8 1TR, UK

14:20 - 14:45 Finite element modeling of a magnetorheological brake considering hysteresis

Nguyen Phuong Bac


14:45– 15:10 Design of a flow-mode magneto-rheological suspension system for washing machines

Nguyen Quoc Hung



Session Chairs: Pham Hong Giang & Buntara S. Gan (Isogeometric Analysis)

15:30 - 15:55 Isogeometric analysis based heterogeneous multiscale method

Hoang Tuong Ton Duc Thang University, Vietnam

7

15:55 - 16:20 An application of concentration of loads on a ship structure using in isogeometric analysis

Le Tat Hien University of Technology, Vietnam National University, HCM City, Vietnam

16:20 – 16:45 A mixed Nurbs-based isogeometric approach for incompressible media problems

Tran Vinh Loc

Ton Duc Thang University, Vietnam

16:45 - 17:10 Isogeometric limit analysis for plane stress problems

Thai Hoang Chien


+ 15 August 2012 GENERAL SESSION

Location: Main auditorium (1st floor), Building A, Ton Duc Thang University


Session Chairs: Giulio Maier & Wing Kam Liu

8:00-8:45 On duality, symmetry and symmetry lost in solid mechanics

Bui Huy Duong (Plenary speaker)


8:45-9:30

S-FEM for fracture problems, theory, formulation and application

Gui-Rong Liu (Plenary speaker)

University of Cincinnati, USA

9:30 - 10:00 Coffee break

Location: Outside of the main auditorium (1st floor), Building A, Ton Duc Thang University

3 PARALLEL SESSIONS (10:00 – 11:45) SESSION A2: 15 August 2012

Location: Room A104 (1st floor), Building A


Session Chairs: Nguyen Dang Hung & Manfred Staat (Limit and Shakedown Analysis – Theory and Computation)

10:00-10:40 Limit and shakedown analysis under uncertainty

Manfred Staat (Keynote speaker)

Aachen University of Applied Sciences, Germany

10:40-11:20 Reduced shakedown formulation in plane stress problems

Pham Duc Chinh (Keynote speaker)

Institute of Mechanics, Vietnam

11:20 - 11:45 FEM based shakedown analysis of hardening structures

Pham Phu Tinh Hanoi Architecture University, Vietnam

8

SESSION B2: 15 August 2012

Location: Meeting room B (Ground floor), Building B


Session Chairs: Alexander M. Korsunsky & Tran Kim Khoa (Numerical and Experimental Modeling of Concrete Structures)

10:00-10:25 Research on solution to strengthen concrete T beams reinforced with carbon fiber reinforced polymer composites

Hoang Phuong Hoa Danang University of Technology, Vietnam

10:25-10:50 Simulation of spalling behavior of concrete due to rebar corrosion using RBSM

Tran Kim Khoa Nagoya University, Japan

10:50 - 11:15 A computational method for nonlinear analysis of reinforced concrete frame structures

Tran Ngoc Linh Technische Universität Darmstadt, Germany

11:15 -11:40 A simplified model to simulate the non linear behavior of reinforced concrete column

Nguyen Xuan Huy University of Transport and Communications, Vietnam

SESSION C2: 15 August 2012

Location: Meeting room C (Ground floor), Building C


Session Chairs: Hikaru Nakamura & Nguyen Dinh Giang (Computational Civil Engineering)

10:00-10:25 Design of a permanent structural health monitoring system on the Guadalquivir rail bridge based on baseline ambient vibration testing sensor placement and optimal

Bui Tien Thanh University of Leuven, Belgium

10:25-10:50 Heat transfer and structural response modelling of concrete filled steel hollow section columns

Chu Thi Binh Hanoi Architecture University, Vietnam

10:50 - 11:15 A Simple Model for Calculation of Superstructure - Soil Interaction

Nguyen Huynh Tan Tai

Thu Dau Mot University, Vietnam

11:15 -11:40 Crack identification in functionally graded material plate by wavelet analysis of vibration mode

Lam Phat Thuan HCM City University of Technical Education Vietnam

9

LUNCH BUFFET (12:00 – 13:30)

Location: outside the main auditorium (1st floor), Building A


Location: Room A104 (1st floor), Building A


Session Chairs: Claude Stolz & Gui-Rong Liu (Computational Mechanics of Materials and Structures)

13:30 - 14:10 Rich tomography techniques for the analysis of microstructure and deformation

Alexander M. Korsunsky (Keynote speaker)

University of Oxford, United Kingdom

14:10 - 14:35 Phenomenological and micromechanical models for high temperature creep of single crystal superalloys

Trinh Bach Tuyet Ruhr-University of Bochum, Germany

14:35 - 15:00 From diffuse to localized damage: the role of friction

Nguyen Dinh Giang University of Sydney, Australia

15:00-:15:30 Coffee break

Session Chairs: Dang Van Ky & Kok Keng Ang (Computational Dynamics)

15:30 - 16:10 Analysis of high-speed rail accounting for jumping wheel phenomenon

Kok Keng Ang (Keynote speaker)

National University of Singapore, Singapore

16:10 - 16:35 Hybrid frequency-time domain model for coupled sloshing-floating tank motion problem

Luong Van Tuyen National University of Singapore, Singapore

16:35 - 17:00 Numerical simulation of fully nonlinear wave radiation by submerged oscillating vertical cylinders

Kok Keng Ang

National University of Singapore, Singapore

17:00 – 17:25 Prediction of column and corewall shortenings in high-rise buildings using CEB-FIP90

Luong Van Hai University of Technology, Vietnam National University, HCM City, Vietnam

10




Session Chairs: Kok Keng Ang & Nguyen Thien Tong (Computational Mechanics of Materials and Structures)

13:30-13:55 A study on stress concentration effect in rapid evaluation of fatigue limit by numerical analysis

Ly Hung Anh University of Technology, Vietnam National University, HCM City, Vietnam

13:55-14:20 Representative volume element for plates with random microstructures

Nguyen Trung Kien

HCM City University of Technical Education Vietnam Mechanics

14:20 - 14:45 Ultimate strength analysis of steel plates using ISO/DIS 1872-2 and ULSAP

Nguyen Tien Dung

University of Transport and Communications, Vietnam

14:45-15:10 Matching asymptotic method and nucleation of a defect at a notch

Dang Thi Bach Tuyet



Session Chairs: Giulio Maier & Pham Hong Giang (Optimization and Inversed Problems)

15:30 - 15:55 Pile foundation layout design by using GA Buntara S. Gan College of Engineering, Nihon University, Japan

15:55 - 16:20 Multidisciplinary design optimization of helicopter rotor blades

Vu Ngoc Anh University of Technology, Vietnam National University, HCM City, Vietnam

16:20 - 16:45 Finite element analysis on temperature distribution of ethane storage tank concrete foundation – A case study

Thanongsak Imjai

Rajamangala University of Technology Taiwan, Thailan

16:45 - 17:10 Fire resistance estimation of an existing pre-stressed composite floor

Nguyen The Duong

Duy Tan University, Vietnam




Session Chairs: Gui-Rong Liu & Leong Hien Poh (Computational Solids and Structural Mechanics)

13:30-13:55 A double-channel vertical solar chimney Nguyen Quoc Y

University of Technology, Vietnam National University, HCM City, Vietnam

13:55-14:20 Modeling of the mechanical behavior of MSWI bottom ash with the Mohr-Coulomb model: Using the finite element software CESAR-LCPC

Le Ngoc Hung

Université Lille Nord de France, France

11

14:20 - 14:45 Dynamic response of cable stayed bridges under vehicles considering the moving masses

Nguyen Trong Phuoc

University of Technology, Vietnam National University, HCM City, Vietnam

14:45-15:10 Simulation of thermal fields of high voltage underground cables using the adaptive hp – Finite element method

Vu Phan Tu University of Technology, Vietnam National University, HCM City, Vietnam


Session Chairs: Manfred Staat & Pham Duc Chinh (Computational Solids and Structural Mechanics)

15:30 - 15:55 Limit load computation of Mindlin-Reissner plates using the ES-DSG method and second-order cone programming

Le Van Canh International University, Vietnam National University, HCM City, Vietnam

15:55 - 16:20 An effective adaptive limit analysis of soil using FEM and second-order cone programming

Phung Van Phuc


16:20 - 16:45 Limit analysis of cracked structures using XFEM and second-order cone programming

Tran Trung Dung

HCM City Open University, Vietnam

16:45 - 17:10 An improvement in implementation of the meshless method RBIEM

Bui Thanh Tu

Hanoi University of Science, Vietnam

BANQUET – GALA DINNER (19:00 – 21:30) - Locations: Hall Event, Kim Do Hotel, 133 Nguyen Hue Street, District 1

16 August 2012


Location: Room A104 (1st floor), Building A, Ton Duc Thang University


Session Chairs: Dong Qian & Huynh Dinh Bao Phuong (Computational Solid and Fluid Mechanics)

8:00-8:40 A static condensation reduced basis element approximation: Application to three-dimensional acoustic muffler analysis

Huynh Dinh Bao Phuong (Keynote speaker)

Massachusetts Institute of Technology (MIT), USA

8:40-9:05 Vertical and horizontal attenuation coefficients in ocean waves by dynamic water heights

Truong Hoang Vinh Phuong

Research Engineer, Westminster, USA

9:05-9:30 Computations of compound capillary jets Vu Van Truong Ritsumeikan University, Japan

9:30 - 10:00 Coffee break

12

Session Chairs: Huynh Dinh Bao Phuong & Dong Qian (Computational Solid and Fluid Mechanics)

10:00 - 10:25 Coupled atomistic-continuum simulation of lattice dynamic fracture based on extended space-time FEM

Dong Qian

University of Cincinnati, USA

10:25- 10:50 Dynamic water stiffness, dynamic water damping and dynamic water mass for ship-water-interaction analyses

Truong Hoang Vinh Phuong

Research Engineer, Westminster, USA

10:50 –11:15 Model order reduction for Bayesian approach to inverse problems

Nguyen Ngoc Hien National University of Singapore, Singapore




Session Chairs: Kihong Shin & Nguyen Quoc Hung (Computational Dynamics and Controls)

8:00-8:25 Suggestion on the conditions to activate the catenary action in the building frames further to an impact leading to the loss of a column

Luu Nguyen Nam Hai


8:25-8:50 Aeroelasticity stability of a long-span suspension bridge by mechanically driven flap

Phan Duc Huynh HCM City University of Technical Education, Vietnam

8:50 - 9:15 Monitoring of cables tension using two dimensional vibratory orbits

Nguyen Thi Cam Nhung

ULB-University of Brussels, Belgium

9:15-9:40 Structural control of benchmark buildings equipped with variable stiffness devices and viscous fluid dampers

Pham Nhan Hoa International University, Vietnam National University, HCM City, Vietnam


Session Chairs: Hikaru Nakamura & Nguyen Quoc Hung (Computational Dynamics and Controls)

10:00-10:25 Stochastic analysis coriolis dynamic vibration absorber by Karhunen Loeve expansion and partial linearization technique

La Duc Viet Institute of Mechanics, Vietnam

10:25-10:50 Improving long-span suspension bridge wind stability with active control winglets

Phan Duc Huynh HCM City University of Technical Education, Vietnam

10:50 - 11:15 A new measure of similarity between two time data in the frequency domain

Kihong Shin Andong National University, Korea

13




Session Chairs: Nguyen Dang Hung & Pham Khac Hung (Computational Structural and Fluid Mechanics )

8:00-8:40 Establishment of methodology for determination of the strength condition of fixed offshore jacket structures in deepwater basing on probabilistic model and reliability theory, and its application in Vietnamese sea condition

Pham Khac Hung National University of Civil Engineering, Vietnam

8:40-9:05 Analysis of shell structures by a cell-based smoothed discrete shear gap method using triangular elements

Nguyen Thoi Trung


9:05– 9:30 An analysis of eccentrically stiffened plates by CS-DSG3 using triangular elements

Bui Xuan Thang University of Science, Vietnam National University, HCM City, Vietnam


Session Chairs: Nguyen Dang Hung & Pham Khac Hung (Computational Structural and Solid Mechanics )

10:00-10:25 Analysis of shell structures via a smoothed four-node flat element

Nguyen Van Hieu HCM City University of Architecture, Vietnam

10:25 – 10:50 Geometrically nonlinear responses of a functionally graded beam on Winkler foundation under a moving harmonic load

Nguyen The Truong Phong

HCM City University of Technical Education, Vietnam

10:50– 11:15 Computational homogenization for multiscale crack modelling

Nguyen Vinh Phu Ton Duc Thang University, Vietnam

GENERAL SESSION (11:30 – 12:00) - Location: Main auditorium (1st floor), Building A

+ 11:30 –12:00: Closing remarks by ACOME Chairman, Prof. Nguyen Thien Tong

LUNCH BUFFET (12:00 – 13:30)

Location: outside the main auditorium (1st floor), Building A

Documents

1st ACOME Program