2013 Arlen Ness for Harley Davidson®

FRAMES / SUSPENSION

2 FRAMES & SUSPENSION

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

3

FRAMES & SUSPENSION: FORK LEGS / FORK BOOTS / STABILIZER LINKS / TRIPLE TREES / KICKSTANDS / LOWERING KITS / FRAME GRILLS

FRAMES / SUSPENSION

4 HOT LEGS FORK LEGS

DEEP CUT black

SMOOTH chrome

DEEP CUT black, single disc / dual caliper

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Each fork leg is constructed from forged billet aluminum and machined to perfection > Features a tapered design with a hidden axle to drastically clean up and add style to your front end where it will have the most noticeable impact on the overall look of the bike> Available in standard dual disc, single disc, and single disc dual/twin caliper applications > Twin caliper applications allow you to bring the right side caliper on FLT models to the front of the left side leg for single disc looks with dual disc braking power> Offered in Smooth and Deep Cut styles with chrome or black anodize � nish> Designed to � t Touring, Softail, and Dyna models> Fork legs for Dyna™ application require the purchase of a seperate axle. Axle NOT included with fork legs.

HOT LEGS FORK LEGS

2000-2007 FLT, Single Disc2008-2013 FLT, Single Disc2000-2007 FLT, Dual Disc2008-2013 FLT, Dual Disc2000-2007 FLT, Single Disc, Dual Caliper2008-2013 FLT, Single Disc, Dual Caliper

2006-2007 FXD / FXDL2008-2013 FXD / FXDL

2000-2006 FXST2007-2013 FXST2000-2006 FLST2007-2013 FLST2006-2007 FXD / FXDL 1”2008-2013 FXD / FXDL 25mm2000-2007 FLT2008-2013 FLT

2008-2013 FLT non-ABS w/13” Apes2008-2013 FLT non-ABS w/OEM bar ends2000-2007 FLT w/13” Apes2000-2007 FLT w/OEM bar ends2008-2013 FLHR/RC ABS w/ OEM Bar Ends2008-2013 FLHR/TC/CU/X ABS w/ OEM Bar Ends2008-2013 FLHR ABS w/ OEM Bar Ends2009-2013 FLH/FLT (Exc. FLTR) ABS w/ OEM Bar Ends

2000-2006 FLST, Single Disc2007-2013 FLST, Single Disc2000-2006 FXST, Single Disc2007-2013 FXST, Single Disc

DEEP CUT, CHROME SMOOTH, CHROMEDEEP CUT, BLACK SMOOTH, BLACK

SOFTAIL™ MODELS

FLT MODELS

BRAKE LINE KITS (for Single Disc, Dual Caliper Legs)

DYNA™ MODELS (REQUIRES PURCHASE OF SEPARATE AXLE, AXLE NOT INCLUDED)

REPLACEMENT AXLE

06-52606-52406-51206-51006-53406-532

06-57206-576

06-50806-50906-51806-51906-57806-57906-51606-517

06-53606-53706-53806-53906-536006-536106-536206-5363

06-53606-53706-53806-53906-536006-536106-536206-5363

06-53606-53706-53806-53906-536006-536106-536206-5363

06-53606-53706-53806-53906-536006-536106-536206-5363

06-55606-55206-56606-562

06-52706-52506-51306-51106-53506-533

06-57306-577

06-50806-50906-51806-51906-57806-57906-51606-517

06-55706-55306-56706-563

06-52206-52006-50306-50006-53006-528

06-57006-574

06-50806-50906-51806-51906-57806-57906-51606-517

06-55406-55006-56406-560

06-52306-52106-50406-50206-53106-529

06-57106-575

06-50806-50906-51806-51906-57806-57906-51606-517

06-55506-55106-56506-561

5

NEW

$599.95$599.95$599.95$599.95$599.95$599.95

$599.95$599.95

$49.95$49.95$49.95$49.95$49.95$49.95 $49.95$49.95

$79.95$79.95$79.95$79.95

$224.95$224.95$224.95$224.95

$599.95$599.95$599.95$599.95

SMOOTH chrome SMOOTH black DEEP CUT chrome DEEP CUT blackDEEP CUTDEEP CUT black black blackDEEP CUTDEEP CUT blackDEEP CUTDEEP CUTDEEP CUTDEEP CUT chrome chromeDEEP CUTDEEP CUT chromeDEEP CUTDEEP CUTDEEP CUTDEEP CUTSMOOTHSMOOTH chrome chrome SMOOTHSMOOTH black black

FRAMES / SUSPENSION

6 FORK BOOTS

$229.95

$259.95

$229.95

$299.95

$259.95

$229.95

$299.95

$229.95

$299.95

$229.95

$259.95

$229.95

$259.95

20-014 Deep Cut, black

20-004 Retro, black

20-006 Retro, black diamond cut


20-012 Deep Cut, chrome

20-000 Retro, chrome

> Each fork boot is machined from forged 6061-T6 billet aluminum > Replaces OEM lower fork leg covers > Available in Retro or Deep Cut styles > Retro style is available in chrome, black anodize, or black anodize w/ diamond cut edges > Deep Cut style is available in chrome or black anodize finish > FLT model applications: 1986-up FLT/FLHR; 1986-up FLHT/2006-up FLHX> Softail™ model applications: 1986-up FLSTF/FLSTN (except 2007)> Sold in pairs

FORK BOOT COVERS

20-000Retro Chrome, 1986 - up FLT/FLHR

20-006Retro Black Diamond Cut, 1986-up FLT/FLHR

20-002Retro Chrome,1986 - up FLHT/2006 - up FLHX Models

20-008Retro Black Diamond Cut, 1986 - up FLHT / 2006-up FLHX Models

20-001Retro Black, 1986 - up FLT/FLHR

20-012Deep Cut Chrome, FLT, FLHR, 1986 - up FLHT/2006-up FLHX Models

20-004Retro Black, 1986 - up FLHT/2006-up FLHX Models

20-014Deep Cut Black, FLT, FLHR 1986 - up FLHT/2006-up FLHX Models

20-020Retro Chrome, 1986 - up FLSTF, FLSTN (except 2007)

20-024Deep Cut Black, 1986-up FLSTF, FLSTN (except 2007)

20-021Retro Black,1986 - up FLSTF, FLSTN (except 2007)

20-022Retro Black Diamond Cut, 1986 - up FLSTF, FLSTN (except 2007)

20-023Deep Cut Chrome, 1986 - up FLSTF, FLSTN (except 2007)

SOFTAIL™ MODELS

BAGGER MODELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

7

> The first custom engine stabilizer link for 2009-up Touring models> Features specially designed spherical bearings machined with a counter bore for clean flush mounted hardware > Constructed from billet aluminum > Available in chrome or black anodize finish > Chrome hardware included

BILLET ENGINE STABILIZER LINKS

03-660Deep Cut stabilizer link, chrome

03-662Hole Shot stabilizer link, chrome

03-661Deep Cut stabilizer link, black

03-663Hole Shot stabilizer link, black

NEW> The first custom engine stabilizer link for 2009-up Touring

> Features specially designed spherical bearings machined with

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

> Features specially designed spherical bearings machined with

$99.95

$99.95

$99.95

$99.95

03-662 Holeshot, chrome stabilizer link

03-663 Hole Shot, black stabilizer link

03-660 Deep Cut, chrome stabilizer link

03-661 Deep Cut, black stabilizer link

FORK BOOT COVERS

03-660 Deep Cut, chrome stabilizer link installed

STABILIZER LINKS

FRAMES / SUSPENSION

“KO” RAKED TRIPLE TREES FOR FLT MODELS

20-3751997-2013 FLT models

20-3762009-2013 Road Glide™ fairing mount kit


20-375 “KO” Raked Tree kit for Bagger models

20-375 “KO” Raked Tree kit “KO” RAKED TRIPLE TREES FOR FLT MODELS

20-3751997-2013 FLT models



20-375 “KO” Raked Tree kit “KO” Raked Tree kit

8 RAKED TREES

$899.95

$169.95

$169.95

> These 11-degree billet triple trees will properly rake your Bagger for the use of 21”, 23”, & 26” wheels. No cutting or modification of stock frame required> Extensivly road tested, this kit is the best handling raked tree kit available > Designed exclusively for 21”, 23”, & 26” diameter wheels, stock diameter wheels will NOT work with triple tree kit > When using 21” front wheel the trail is 4-1/2”, 23” wheel is 5-1/4”, and when 26” front wheel is 6”> Batwing style fairings maintain stock position and does not require angled headlight wedges or special brackets to properly adjust headlights> When using 23” or 26” front wheels on Road Glide™ models, fairing bracket 20-376 or 20-377 is recommended for increased fairing clearance> Designed to fit all 1997-up FLT Touring models (except Road King™)> Kit includes black anodized billet aluminum triple trees, steering stem, fork tube extension, fork stops, travel limiters, and all necessary hardware

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

“KO” RAKED TRIPLE TREES FOR FLT MODELS “KO” RAKED TRIPLE TREES FOR SOFTAIL™

20-3721997-2013 FLT models

20-372 “KO” Raked Tree kit for Softail™ models

20-372 “KO” Raked Tree kit

9

NEW

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

“KO” RAKED TRIPLE TREES FOR SOFTAIL™ 20-372 “KO” Raked Tree kit “KO” Raked Tree kit

$899.95

> Properly rake your Softail for the use of 21”, 23”, and 26” wheels > Triple Tree’s are constructed from CNC billet aluminum> Upper exposed triple tree is chrome plated for a clean look, hidden lower triple tree is anodized black > Each triple tree kit includes billet top and bottom trees, fork stem, lower bearing, and all necessary hardware > When using 21” & 23” wheels stock length forks (30-1/2” long) are recommended. 26” wheels require the use of 1” shorter for tubes> Always check fender clearance under full compression, limit fork travel if needed> Available for 2000 & up FLST & FLSTF

FRAMES / SUSPENSION

> A must when lowering your motorcycle> Chrome plated forged steel> Kickstands are 1” shorter than stock

> Features internal spring loaded ball bearing lock for a clean look and optimum functionality> Chrome kickstands add that extra touch of styling to an often overlooked piece of your motorcycle> The telescopic chrome plated kickstands are adjustable in height by 1 inch> Mounting brackets are machined from polished stainless steel to eliminate chrome wear in high contact areas> All of these kits feature a hidden ball bearing design return spring for positive stock feel while retaining a clean look

LOWERED KICKSTANDS

HIDDEN SPRING KICKSTANDS

11-0161984-2006 Softail™ models

11-0301984-1999 Softail™, 4-Spd B/T, front mount


11-0321984-1999 Softail™, rear mount

11-0231990-2013 Dyna™ models

11-031*2000-2013 Softail™, rear mount

11-0222007-2013 FLT models

NOTE: Custom mounting may be required.

> All of these kits feature a hidden ball bearing design return spring for positive stock feel while retaining a clean look

11-0301984-1999 Softail™, 4-Spd B/T, front mount

11-0321984-1999 Softail™, rear mount

11-031*2000-2013 Softail™, rear mount

NOTE:

> Converts factory springer to accept custom handlebars with 3-1/2" centers, (most handlebars)

> CNC machined from 6061-T6 billet aluminum> Chrome plated> Available for 1988-2007 FXSTS and FLSTS models

CUSTOM TOP TREES FOR SPRINGER

20-7781988-2007 FXSTS models

20-7791988-2007 FLSTS models

> Drop the rear end of your bike for a sleek, low pro� le > Visible kits � nished in black or polished to match factory swingarm > Kits available in adjustable or standard drop > Adjustable kits lower from 1”- 2” > Standard drop kit lower bikes approximately 1” > Supplied with mounting hardware or designed to use factory hardware

REAR LOWERING KITS

17-1002000-2013 Softail™, except 05-13 FLSTN, 05 FXSTD & FXCW


17-1102002-2013 FLT models (except models w/ soft bags)

NOTE: With all lowering kits, check all clearances prior to riding your motorcycle.

ADJUSTABLE DROP

STANDARD DROP

10 LOWERING ACCESSORIES

$79.95

$199.95

$79.95

$199.95

$79.95

$199.95

$79.95

$179.95

$179.95

$69.95

$104.95

$169.95

11-030 1984-1999 FXST front

17-101 1989-1999 Softail™ models

11-021 2007-2013 Softail™

11-032 1984-1999 FXST rear

17-100 2000-2013 Softail™ models

11-031 2000-2013 FXST rear

17-110 2002-2013 FLT models

11-016 1984-2006 Softail™

11-0231990-2013 Dyna™ models

11-022

20-778 1988-2007 FXSTS models 20-779 1988-2007 FLSTS models

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

LOWERED KICKSTANDS

HIDDEN SPRING KICKSTANDS

CUSTOM TOP TREES FOR SPRINGER

REAR LOWERING KITS

> Ness design simpli� es lowering the front end of your bike> Specially designed fork dampers are shortened and drilled in a strategic position to obtain factory ride quality> Utilize factory fork springs> Each kit includes 2 complete damper assemblies> Will not � t Springer™, Deuce™, 06-up FXD, or FXCW models

> Everything you need to lower the front and rear of most late model Harley-Davidsons®

> Specially designed fork dampers lower the front end without replacing factory springs

> Both kits for Softail™ lower the front of FXST models by 2-1/2” and FLST models by 2” while the rear designs are adjustable to lower as much as desired

> Each kit includes 2 specially designed dampers, 2 adjustable rear shock adjusters, and a 1” shorter kickstand (fork oil not included)

NOTE: Please check all clearances including front fender clearance with suspension travel bottomed out prior to riding your motorcycle.

NOTE: Always check ground clearance and tire to fender clearance when installing these kits.

FRONT LOWERING KITS

COMPLETE LOWERING KITS

28-0011984-1999 41mm FXST (2-1/2” Lower)1986-1999 41mm FLST (2-1/2” Lower)

17-0312007-2013 FLT, except models w/ soft bags

28-0022000-2013 41mm FXST (2” Lower)2000-2013 41mm FLST (2” Lower)1997-2013 41mm FLT except 02-06 FLT/FLHT (1-1/2” Lower)

17-0261989-1999 Softail™, except Springer™ & Deuce™

28-0031990-2005 39mm FXDL (2-3/4” Lower)1994-2005 39mm FXDS (2-3/4” Lower)1994-2005 39mm FXD (2” Lower)1997-2011 39mm XL (2” Lower)

17-0252000-2006 Softail™, except Springer™ & Deuce™

17-0322007-2013 Softail™, except Springer™, Deuce™ & Rocker™

17-026 1989-1999 Softail™

17-032 2007-2013 Softail™

17-031 2007-2013 FLT

17-025 2000-2006 Softail™

28-002 28-001 28-003

11

$49.95

$49.95

$49.95

$249.95

$199.95

$179.95

$179.95

FRAMES / SUSPENSION

> Machined from billet aluminum in the USA > Adds style and takes eyes away from the un� nished looking areas of stock frame> Many matching Deep Cut styled accessories available such as: � oorboards, grips, latch covers, and more > Available in chrome or black anodize � nish > Bolt-on installation, mounts to front frame downtubes

DEEP CUT FRAME GRILLS

03-6502009-2013 FLT, Deep Cut chrome

03-6512009-2013 FLT, Deep Cut black



FRAME GRILL

12 FRAME COVERS

NEW

$169.95

$169.95

$169.95

$169.95

03-650 Deep Cut frame grill chrome, installed 03-653 Deep Cut frame grill black, installed

03-653 Deep Cut, black for 94-08 FLT 03-650 Deep Cut, chrome for 09-13 FLT

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

Bringing back what we started over 35 years ago! This sleek signature design started the Digger trend and is a great frame for any custom project. Constructed of 7/8” DOM steel tubing with rugged .188” wall thickness for optimum strength and durability. The frames top bar is 1-1/2” tubing with .188” wall thickness for easy wire routing.

> Designed to accept 23” wheels front and rear > Accepts EVO style Big-Twin engines up to 124”> Accepts EVO style Softail® style transmissions > Rear axle included > Under the frame bolt-on oil tank > Battery box/electrical box that also serves as coil and key switch mount > Available in 2” stretch with 38 degree rake or 5” stretch “Lowliner” style with a 1” drop in the neck with 38 degree rake

DIGGER FRAME KITS

06-7205” stretch, 38° rake, 1” drop in neck06-7222” stretch, 38° rake

13


$2,899.95

$2,899.95

The frames top bar is 1-1/2” tubing with .188” wall thickness for

$2,899.95

$2,899.95

06-720 5” stretch, 38° rake, 1” drop in neck

06-720 rear 06-720 rear right

06-720 5” stretch, 38° rake, 1” drop in neck

DIGGER FRAME

06-720 front left

14 BODY WORK

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

15

BODY WORK: STRETCHED SADDLEBAGS / BAG EXTENSIONS / SIDE COVERS / TANK EXTENSIONS / WINDSHIELD TRIM / FAIRINGS / FENDERS

BODY

WOR

K

16 DOWN-N-OUT SADDLEBAGS

06-978 Dual exhaust stretched saddle bag set

06-482 Dual exhaust stretched fender

60-100 Bagger Nation pleated super stretch fender w/ dual outlets

06-978 Dual exhaust stretched saddle bag set Dual exhaust stretched saddle bag set

$1,499.95

$1,499.95

$1,499.95

$899.95

$1,199.95

$899.95

$1,199.95

$699.95

$475.95

$199.95

$699.95

$899.95

$899.95

$899.95

$899.95

Down-N-Out fender kits are a direct replacement for 1998-up FLT Bagger models. These new super stretched fenders are de-signed to work and fl ow with our Down-N-Out Saddlebags. Each fender is constructed from high quality composite materials and oven cured over a wide heat range to insure stability. It is primed with a high quality polyester sanding primer and is ready to paint. Each fender is put through a 14-point quality control process.> Each kit includes a billet Ness LED license/taillight assembly with turn signals that mount in the recessed area of the fender. Also includes exhaust extensions and chrome heat shields.> Hidden steel fender support brackets and fl exible hidden antenna are also included for extra clean installation.> Available with dual, single or NO exhaust cut-outs. > Available in primed ready to paint fi nish.

> Direct bolt on to 2009-up HD touring models using stock hardware> Includes Stealth II chrome license frame with hidden LED’s> Available for dual exhaust outlet or no exhaust outlet> Blade LED taillights available separately

DOWN - N - OUT STRETCHED FENDER

BAGGER NATION PLEATED SUPER STRETCH FENDER KIT FOR ARLEN NESS DOWN-N-OUT SADDLEBAGS

06-481 1997-2008 FLT, single exhaust

06-480 1997-2008 FLT, dual exhaust

60-100 Pleated Super Stretch Fender (Dual Outlet)

06-486 97-08 FLT, dual w/o license plate pocket/assembly

20-537 Blade taillights, black trim

60-120 Ness Muffl er/Heat shield ext. kit for dual outlet fender kit

06-483 2009-2013 FLT, single exhaust

06-474 1997-2008 FLT, NO exhaust

06-476 2009-2013 FLT, NO exhaust

06-482 2009-2013 FLT, dual exhaust

60-101 Pleated Super Stretch Fender (No Outlet)

06-487 09-13 FLT, dual w/o license plate pocket/assembly

NOTE: Arlen Ness will not be responsible for any damage sustained to paint jobs.

We set the standard for extended bags back in the early 90’s, and we fi gured it was time to raise the bar again. The Down-N-Out bags from Arlen Ness are 6” longer and 2” lower than our original Big Bags. They feature a patent pending taper on the lower section of the bag for a clean new look and an extra 2” of ground clearance. These bags are constructed from high quality composite materi-als and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed fi bers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat fi nish to sand and prime, every part comes fi nished, primed with a super high quality polyester sanding primer and is ready to paint. As always each bag is fi t and lid tested and passes a 14-point quality control process. These bags are strong, long, light, and perfectly balanced. Down-N-Out Bags designed to fi t factory lids and hardware. The bags are available in a primed ready to paint fi nish. Sold in pairs for 1993-up FLT applications, lids and mounting hardware (03-525) not included.

DOWN - N - OUT STRETCHED SADDLEBAGS

06-978 Dual exhaust stretched bag kit

06-979 Single exhaust stretched bag kit

06-982 NO exhaust stretched bag kit

NOTE: please check fi t and fi nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

17



DOWN - N - OUT STRETCHED FENDER

BAGGER NATION PLEATED SUPER STRETCH FENDER KIT FOR ARLEN NESS DOWN-N-OUT SADDLEBAGS

DOWN - N - OUT STRETCHED SADDLEBAGS

BODY

WOR

K

18 BIG-BAG SADDLEBAGS

06-981 Big Bag kit for dual exhaust

06-981 Big Bag stretched saddlebag kit

$1,299.95

$1,399.95

$1,499.95

Big Bags are longer than stock for a better look and increased storage. They are produced using a state of the art computer controlled injection process. This sophisticated process produces a smooth and fi nished product on both inner and outer surfaces. We carefully control temperature, vacuum, fi ber placement and pressure during the manufacturing process to produce a void free super strong structure. Every saddlebag goes through a 13 hour post cure cycle in computer controlled ovens, slowly bringing them from 70° to over 200°. This ensures maximum strength and tem-perature stability over a wide heat range. Our bags are jig drilled and lid tested to ensure proper fi t and function to your factory lids. Big Bags are available in a ready-to-paint primer fi nish. Sold in pairs for 1993-up FLT applications. Lids and mounting hardware (03-525) are not included.

ARLEN NESS BIG BAG SADDLEBAG KITS

06-981Big Bag kit for dual exhaust

06-986Big Bag kit for single exhaust

06-988Big Bag kit for NO exhaust

NOTE: please check fi t and fi nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

> Bagger-Tail fender kits from Arlen Ness are a direct replacement for the factory fender on 1997-up FLT Bagger models> Pre-drilled composite fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags> Fenders can be used with either a stock width rear tire or up to a 200mm tire> Supplied with a Ness LED license/taillight assembly with turn signals that mount in the recessed area of the fenders. Light assembly plugs into the factory harness for simple installation> Hidden steel fender support brackets and flexible hidden antenna are included for a clean installation> We recommend using the Bagger-Tail fender kit with either our Big Bags or saddlebag extensions> Bagger-Tail fender design is available with cut-outs for dual exhaust, single exhaust or no exhaust cut-outs. Be sure to check your application > Available in a primed, ready to paint finish

BAGGER-TAIL REAR FENDER KITS FOR FLT

06-4951997-2008 FLT, NO exhaust

06-4982009-2013 FLT, single exhaust

06-4792009-2013 FLT, dual exhaust, w/o license plate pocket/assembly

06-4992009-2013 FLT, NO exhaust

06-4901997-2008 FLT, dual exhaust

06-4941997-2008 FLT, single exhaust

06-4781997-2008 FLT, dual exhaust, w/o license plate pocket/assembly

06-4922009-2013 FLT, dual exhaust

NOTE: Does not fit models with tour packs or quick detach back-rests. End user can modify fender or fabricate custom brackets to accept tour pack brackets or quick detach backrests if desired. Please check fi t and fi nish prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs.

FENDER KITS

FRAM

ES /

SUSP

ENSIO

N

> Bagger-Tail fender kits from Arlen Ness are a direct replacement for the factory fender on 1997-up FLT Bagger models> Pre-drilled composite fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags> Fenders can be used with either a stock width rear tire or up to

> Supplied with a Ness LED license/taillight assembly with turn signals that mount in the recessed area of the fenders. Light assembly plugs into the factory harness for simple

> Hidden steel fender support brackets and flexible hidden antenna are included for a clean installation> We recommend using the Bagger-Tail fender kit with either our

> Bagger-Tail fender design is available with cut-outs for dual exhaust, single exhaust or no exhaust cut-outs. Be sure to

> Available in a primed, ready to paint finish

BAGGER-TAIL REAR FENDER 19

06-492 Bagger-Tail dual exhaust

06-498 Bagger-Tail single exhaust

06-499 Bagger-Tail NO exhaust

$899.95

$899.95

$849.95

$849.95

$599.95

$799.95

$599.95

$799.95

ARLEN NESS BIG BAG SADDLEBAG KITS

BODY

WOR

K

06-396 Saddlebag extensions

06-497 Bagger fender cover only

03-525 Saddlebag latch kit 03-525 Saddlebag latch kit Saddlebag latch kit

20 BODY ACCESSORIES

$339.95

$249.95

$669.95

$339.95

> An economical way to achieve the stretched bag look> Saddlebag extensions can be bolted on (drilling required) or

bonded to your factory saddlebags> Constructed of fi berglass, ready to be painted> Kit includes: two saddlebag extensions and all necessary

mounting hardware> Looks great with our Bagger Rear Fender Cover

> Direct replacement saddlebag lid latch kit > Economically priced compared to expensive OEM latch kit > Comes with all necessary hardware and hinges, except saddlebag lock > Great for aftermarket custom saddlebags

SADDLEBAG EXTENSIONS

SADDLEBAG LATCH KIT

06-3961993-up Bagger models

03-525Saddlebag latch kit

> Developed to fi t directly over existing rear fenders on FLT and Road King™ models 1997-2008 with slight modifi cations> Fender cover designed to clean up ugly gap between fender

and factory saddlebags> Saddlebag extensions can be bolted on for custom applications.> Constructed of fi berglass> Kit includes fender cover, two saddlebag extensions and all necessary mounting hardware> Fender cover also available separately

NESS REAR FENDER COVER FOR BAGGER

06-697Bagger fender cover & bag extension kit

06-497Ness Bagger fender cover ONLY

06-396 Saddlebag extensions Saddlebag extensions

Bagger fender cover only

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

03-624 Gloss black w/ crash bar from front

03-624 Gloss black w/ crash bar side view

21

> Arlen’s design nicely blends into your factory saddle bags or Ness Big Bags for a clean custom look. Covers are also longer than stock to add additional styling and surface area for your paint scheme> Covers are designed to fi t directly over the factory units by drilling 3 small holes in unseen areas of the factory side cover > Covers are available in gloss black coated ABS fi nish to eliminate a trip to your painter unless custom paint is desired.> Available for 1997-2013 FLT models> Made in the U.S.A. and sold in pairs

SIDE COVERS FOR FLT MODELS

03-6231997-2008 FLT, w/ Crash Bars

03-6242009-2013 FLT, w/ Crash Bars

03-6131997-2008 FLT, w/o Crash Bars

03-6142009-2013 FLT, w/o Crash Bars

$199.95

$199.95

$199.95

$199.95

$99.95

$44.95

SADDLEBAG EXTENSIONS

SADDLEBAG LATCH KIT

03-600 Side covers for FXR™ models 20-100 Stash tray for FXR™> Available for all FXR™ models 1982-94> Constructed from high-impact ABS plastic> Side covers conceals brake and electrical components while

providing an appealing look> Stash tray is form fi tted to go under your seat for easy access to tools, spark plugs, registration, and insurance card> Ready for prep and paint

SIDE COVERS AND STASH TRAY FOR FXR™

03-600FXR™ side cover kit, pair

20-100FXR™ stash tray

NESS REAR FENDER COVER FOR BAGGER

BODY

WOR

K

22 WINGED TANK EXTENSIONS

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

19-850 Bare-Bones solo seat

04-111 Ness winged tank extension

06-493 Sorrento 2-up seat

23

$399.95

$399.95

$325.95

$599.95

Our winged tank extension gives you the look of a sleek custom tank at the fraction of the cost. No cutting, grinding, welding, or buying an expensive aftermarket tank. Constructed from high quality composite materials that are oven cured over a wide heat range to ensure stabilty. Each extension piece has hand placed fibers strategically located to provide the highest structural integrity possible. Each piece is primed and ready to paint.

> Designed to fit 09-up & 07-earlier Street Glide™ and Road Glide™ models (FLHX, FLHT, FLT, FLTR). Will not fit Road King™ models (FLHR)> Requires the purchase of custom seat> Compliment your tank’s new style with an Arlen Ness custom gas cap, pg. 100

NESS WINGED TANK EXTENSIONS FOR BAGGERS

NOTE: Winged tank extension requires purchase of new seat or modification of current seat. Seats (19-850 & 19-851) will NOT work with 2007-earlier extension kit (04-114).

04-1112009-2013, Tank Extension kit

04-1141998-2007, Tank Extension kit

19-850Bare-Bones Solo seat

19-851Sorrento 2-Up seat

BODY

WOR

K

24

> Provides a clean transition between fairing and windshield > Machined from billet aluminum in the U.S.A > Available in 3 styles: Deep Cut, Beveled, and Slot Track > Choose from chrome or black anodize finish > Windshield trim installs easily in minutes and each trim kit includes chrome mounting hardware

BILLET WINDSHIELD TRIM

STYLE

Deep Cut, chrome 03-691

03-690

03-695

03-694

03-692

03-693

Beveled, chrome

Slot Track, chrome

Deep Cut, black

Beveled, black

Slot Track, black


03-695 Beveled, chrome

03-693 Slot Track, chrome

03-692 Slot Track, black and Beveled, black (03-694)


03-694 Beveled, black

03-692 Slot Track, black

WINDSHIELD TRIM

NEW

$149.95

$149.95

$149.95

$149.95

$149.95

$149.95

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

06-950 Bob Dron fairing kit

04-112 Gloss black Flow dash installed

FAIRING KITS 25

BILLET WINDSHIELD TRIM

$189.95

$299.95

$99.95

$99.95

$159.95

$299.95

$249.95

Our latest dash design looks great on 2008-up Road Glide™ or Street Glide™ models. This unique design will bring life to your tank and gives a killer custom look. Constructed of heavy ABS plastic for premium quality and durability.

> Designed to fit 2008-Up Street Glide™ and Road Glide™ models (FLHX, FLHT, FLT, FLTR). Will not fit Road King™ (FLHR models)> Available in gloss black or paintable finish> Add a custom Arlen Ness gas cap to compliment your new dash> Will work with factory seat

> Classic fairing provides protection from the elements> Accepts factory spot lights> Fairing body constructed in heavy ABS, windshield is smoked plexiglass> Fairing kits include: 1 fairing body, 1 smoked windshield, stain less steel mounting brackets and windshield mounting hardware

NESS FLOW DASH FOR 2008-UP BAGGER

BOB DRON FAIRING KIT FOR ROAD KING™

04-112Flow dash kit, gloss black

06-950Bob Dron fairing kit

06-951Replacement windshield, dark smoked

06-952Replacement windshield, light smoked

04-113Flow dash kit, paintable

NOTE: Please check fi t and fi nish prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs.

> Give your Road King™ a full fairing look at a fraction of the cost> Innovative bolt-on design mounts to your factory Road King™ windshield in minutes> Available in gloss black coated or paintable ABS fi nishes

NESS WINDSHIELD SKIN FOR ROAD KING™

06-940Gloss black fi nish

06-941Paintable fi nish

06-941 Paintable windshield skin, side

BODY

WOR

K

Bob Dron fairing kit Bob Dron fairing kit

26 FAIRING KITS

$349.95

$319.95

$349.95

$319.95

$89.95

> Arlen Ness offers his famous fairings in a complete kit for simple installation > Complete bolt on kits available for Dyna models 2006-up* > Also, available for Sportster Nightster® models 2004-up or any XL model with 39mm forks, top mount headlight and Nightster® handlebars> Constructed of heavy ABS plastic while the windshield is made from smoked Plexiglass.> Fairing bodies are available in gloss black coated ABS fi nish or paintable fi nish

* 2006 FXD models with bottom mount headlight. Does NOT fi t FXDF & FXDWG Dyna™ models.

DIRECT BOLT-ON FAIRING KITS FOR DYNA™ & SPORTSTER™

06-0332006-up Dyna™, Gloss black fi nish*

06-0352006-up Dyna™, Paintable fi nish*

06-0372004-up Sportster™, Gloss black fi nish

06-0392004-up Sportster™, Paintable fi nish

06-047Replacement smoked windshield

06-035 Paintable fairing for Dyna™

06-037 Gloss black fairing for Nightster™

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

27

$199.95

$89.95

$199.95

$24.95

$199.95

$9.95

> The fairing that started it all> Universal design can be used on various applications> Constructed of heavy ABS plastic while the windshield is made from smoked plexiglass.> Each fairing kit includes: 1 fairing body, 1 smoked windshield, universal mounting brackets and windshield mounting screws> Arlen suggests using #08-006 Fatbob drag handlebars with this fairing

* Does NOT include brackets. 2006-later Dyna™ models require SKU# 06-087.

NOTE: When mounting fairing to 1973-up H.D. Narrow Glide front ends, we suggest using our custom headlight bracket (06-048) which places the headlight in the correct position. Ness wide glide fairing kits (06-087) require fabrication of custom mounting brackets. Inverted front ends require fabrication of custom mounting brackets as well.

REPLACEMENT ACCESSORIES

ORIGINAL FAIRING KITS

06-041Ness plain fairing kit

06-047Replacement smoked windshield

06-043Ness louvered fairing kit

06-048Custom headlight bracket

06-087*Ness wide-glide & custom mid-glide fairing kit

06-049Replacement fastener kit

DIRECT BOLT-ON FAIRING KITS FOR DYNA™ & SPORTSTER™

06-041 Plain fairing kit

06-041 Plain, original fairing kit

06-043 Louvered, original fairing kit Louvered, original fairing kit

BODY

WOR

K

28 FRONT FENDERS

$299.95

$399.95

$399.95

$399.95

$299.95

$399.95

$399.95

$399.95

> Wrapper fenders are now available in Carbon Fiber Composite as well as Standard Composite materials> These front fenders perfectly follow the contour of your 21”, 23”, or 26” front wheel for a clean custom look > New Carbon Fiber Composite fenders are constructed from a proprietary blend of Carbon Fiber and Composite materials for the best strength to weight ratio available> Standard Wrapper fenders are constructed from high quality fiberglass that are treated over a wide heat range for long term durability and strength > All of these fenders weigh approximately 8lbs less than most similar steel fenders > Direct bolt on design, no drilling, no expensive fender spacers and no bodywork necessary> Carbon Fiber Composite fenders are ready to clear or paint. Standard fenders are ready to scuff and paint> Designed to fit 21”, 23, and 26” front wheels > Available for FLT Bagger and FLST models

WRAPPER FRONT FENDERS

06-745 23” Wrapper front fender

06-744 23” Wrapper fender, Carbon Composite 06-749 26” Wrapper fender, Carbon Composite

06-745 23” Wrapper fender, FLT CARBON Composite

06-744 23” Wrapper, carbon composite, FLST



06-746 23” Wrapper, carbon composite, FLT

06-745 23” Wrapper fender, FLT



06-747 26” Wrapper fender, FLT

STANDARD COMPOSITE

CARBON FIBER COMPOSITENEW

Composite as well as Standard Composite materials> These front fenders perfectly follow the contour of your 21”, 23”, or 26” front wheel for a clean custom look > New Carbon Fiber Composite fenders are constructed from a proprietary blend of Carbon Fiber and Composite materials for the best strength to weight ratio available> Standard Wrapper fenders are constructed from high quality fiberglass that are treated over a wide heat range for long term durability and strength > All of these fenders weigh approximately 8lbs less than most similar steel fenders > Direct bolt on design, no drilling, no expensive fender spacers and no bodywork necessary> Carbon Fiber Composite fenders are ready to clear or paint. Standard fenders are ready to scuff and paint> Designed to fit 21”, 23, and 26” front wheels > Available for FLT Bagger and FLST models

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

29

$224.95

$249.95

WRAPPER FRONT FENDERS

> Aggressive design radically improves the look of the front end of your bike> Front fender is designed to fi t any of our 21” x 3.5” billet wheels> Each high quality fi berglass fender is pre-drilled and ready for your custom paint job> Fits 1987-up FLT models and 2010-up Street Glide™ trikes

STREET DRAGGER FRONT FENDER

06-741Street Dragger front fender for FLT models, each

> Great styling for the front of your Bagger> Designed to work with a 21” x 3.5” wheel on 1987-Up FLT models> Fiberglass construction> Available in a paintable fi nish

BIG-WHEELER FRONT FENDER

06-764Paintable fi nish Big-Wheeler

06-764 21” Big Wheeler front fender

06-741 21” Street Dragger front fender

06-741 Street Dragger front fender

06-764 Big-Wheeler uninstalled

BODY

WOR

K

> Café fender offers classic Ness styling and intended for use on narrow glides with 19” or 21” wheels.> Un-drilled for custom applications.> Constructed from heavy ABS plastic.

> Sport fender designed for a performance look.> Un-drilled for custom applications.> Constructed from heavy ABS plastic.

4-3/4” CAFE FRONT FENDER

6-1/4” WIDE SPORT FRONT FENDER

06-0154-3/4” Cafe front fender

06-0276-1/4” Wide-Sport front fender for wide-glide

> Cafe styled fender allows for a 23”x 3.5” wheel to be installed on FXST models> Direct bolt-on, does not require spacers or drilling> 16 gauge steel construction

STEEL CAFE FRONT FENDER FOR 23” WHEELS

06-773Cafe front fender for 23” front wheels

30 FRONT FENDERS

$79.95

$69.95

$249.95

06-015 4-3/4” Cafe front fender installed

06-027 Wide-Sport front fender installed

06-773 Steel cafe front fender for 23” wheels

06-773 Steel Cafe front fender

06-015 4-3/4” Cafe front fender

06-027 Wide-Sport front fender

BODY WORK

FRAM

ES /

SUSP

ENSIO

NWH

EELS

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

4-3/4” CAFE FRONT FENDER

6-1/4” WIDE SPORT FRONT FENDER

STEEL CAFE FRONT FENDER FOR 23” WHEELS

TRIKE FENDER 31

$399.95

$399.95

> Curvaceous design dramatically improves the rear end of your trike> Rear fenders will fi t the factory 15” wheels > These quality fi berglass fenders are pre-drilled and ready for your custom paint job> Fits 2009-up Tri-Glide™ and 2010-up Street-Glide™ trikes> Sold individually

STREET DRAGGER REAR FENDERS FOR TRIKE

06-742Street Dragger rear fender for Trike models, left

06-743Street Dragger rear fender for Trike models, right

06-743 Big-Wheeler right from multiple angles

06-743 Big-Wheeler right

BODY

WOR

K

32 WHEELS & BRAKES

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

33

WHEELS & BRAKES: 10-GAUGE / G3 / ENGRAVED / BRAKE ROTORS / DRIVE PULLEYS / BILLET BRAKE CALIPER HOUSINGS

WHEE

LS

34 10-GAUGE BILLET WHEELS

10-GAUGE

10-GAUGE

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

35

WHEE

LS

36 G3 BILLET WHEELS

G3

G3

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

37

WHEE

LS

ENGRAVED

ENGRAVED

38 ENGRAVED BILLET WHEELS

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

39

WHEE

LS

011-01001011-01002011-01003011-01004011-01005011-01006011-01007

011-04008011-04009011-04001011-04002011-04005011-04006011-04010011-04003011-04004011-04011011-04012011-04013011-04014011-04007011-04015

011-08016011-08017011-08018011-08019011-08014011-08020011-08021011-08022011-08023011-08024011-08025011-08026011-08077011-08027011-08028011-08029011-08030011-08031011-08032011-08033011-08034

011-09008011-09035011-09009011-09001011-09036011-09002011-09016011-09017011-09019011-09014011-09021011-09022011-09023011-09026011-09015

011-10008011-10035011-10009011-10001011-10036011-10002011-10016011-10017011-10019011-10014011-10021011-10015011-10038

011-11008011-11035011-11009011-11001011-11036

012-01001012-01002012-01003012-01004012-01005012-01006012-01007

012-04008012-04009012-04001012-04002012-04005012-04006012-04010012-04003012-04004012-04011012-04012012-04013012-04014012-04007012-04015

012-08016012-08017012-08018012-08019012-08014012-08020012-08021012-08022012-08023012-08024012-08025012-08026012-08077012-08027012-08028012-08029012-08030012-08031012-08032012-08033012-08034

012-09008012-09035012-09009012-09001012-09036012-09002012-09016012-09017012-09019012-09014012-09021012-09022012-09023012-09026012-09015

012-10008012-10035012-10009012-10001012-10036012-10002012-10016012-10017012-10019012-10014012-10021012-10015012-10038

012-11008012-11035012-11009012-11001012-11036

021-01001021-01002021-01003021-01004021-01005021-01006021-01007

021-04008021-04009021-04001021-04002021-04005021-04006021-04010021-04003021-04004021-04011021-04012021-04013021-04014021-04007021-04015

021-08016021-08017021-08018021-08019021-08014021-08020021-08021021-08022021-08023021-08024021-08025021-08026021-08077021-08027021-08028021-08029021-08030021-08031021-08032021-08033021-08034

021-09008021-09035021-09009021-09001021-09036021-09002021-09016021-09017021-09019021-09014021-09021021-09022021-09023021-09026021-09015

021-10008021-10035021-10009021-10001021-10036021-10002021-10016021-10017021-10019021-10014021-10021021-10015021-10038

021-11008021-11035021-11009021-11001021-11036

022-01001022-01002022-01003022-01004022-01005022-01006022-01007

022-04008022-04009022-04001022-04002022-04005022-04006022-04010022-04003022-04004022-04011022-04012022-04013022-04014022-04007022-04015

022-08016022-08017022-08018022-08019022-08014022-08020022-08021022-08022022-08023022-08024022-08025022-08026022-08077022-08027022-08028022-08029022-08030022-08031022-08032022-08033022-08034

022-09008022-09035022-09009022-09001022-09036022-09002022-09016022-09017022-09019022-09014022-09021022-09022022-09023022-09026022-09015

022-10008022-10035022-10009022-10001022-10036022-10002022-10016022-10017022-10019022-10014022-10021022-10015022-10038

022-11008022-11035022-11009022-11001022-11036

032-01001032-01002032-01003032-01004032-01005032-01006032-01007

032-04008032-04009032-04001032-04002032-04005032-04006032-04010032-04003032-04004032-04011032-04012032-04013032-04014032-04007032-04015

032-08016032-08017032-08018032-08019032-08014032-08020032-08021032-08022032-08023032-08024032-08025032-08026032-08077032-08027032-08028032-08029032-08030032-08031032-08032032-08033032-08034

032-09008032-09035032-09009032-09001032-09036032-09002032-09016032-09017032-09019032-09014032-09021032-09022032-09023032-09026032-09015

032-10008032-10035032-10009032-10001032-10036032-10002032-10016032-10017032-10019032-10014032-10021032-10015032-10038

--------------------

10 GAUGE, CHROME

10 GAUGE, BLACK G3, CHROME G3, BLACK ENGRAVED, BLACK

16” x 3.50”2000-2007 FLTR/FLHT/FLHR1984-1999 FLTR/FLHT/FLHR2000-2006 FLST1986-1999 FLST2007-2013 FLST2011-2013 FLST, ABS2011-2013 XL 4818” x 3.50”2008-2013 FLTR/FLHT/FLHR (Non ABS)2008-2013 FLTR/FLHT/FLHR (ABS)2000-2007 FLTR/FLHT/FLHR1984-1999 FLTR/FLHT/FLHR2007-2013 FLST2011-2013 FLST, ABS2011-2013 FLSTF/N/C, ABS2000-2006 FLST1986-1999 FLST2008-2013 FLSTF/N/C2007 FLSTF2008-2013 FLSTSB1984-1999 FXST, FXDWG2011-2013 XL 482002-2007 V-ROD21” x 2.15”2007-2013 FXST2011-2013 FXST, ABS2008-2013 XL Except 48 & XR2000-2006 FXST, 00-05 FXDWG1984-1999 FXST, FXDWGDual 1984-1999 FXST/FXDWG2000-2006 FXSTS2008-2010 FXDF2006-2007 FXDWG2008-2013 FXCW2011-2013 FXCW, ABS2008-2013 FXD/B/C/L2008-2013 FXDWG2006-2007 FXD2004-2005 FXDSingle 2000-2003 FXD/00-07 XLSingle 1084-1999 FXD/FXR/XLDual 2000-2003 FXD/00-07 XLDual 1984-1999 FXD/FXR/XL2007 Deuce2000-2006 Deuce21” x 3.50”2008-2013 FLTR/FLHT/FLHR (Non ABS)2008-2013 FLTR/FLHT/FLHR, S/D, Non-ABS2008-2013 FLTR/FLHT/FLHR (ABS)2000-2007 FLTR/FLHT/FLHR2000-2007 FLTR/FLHT/FLHR, S/D1984-1999 FLTR/FLHT/FLHR2007-2013 FXST2011-2013 FXST, ABS2000-2006 FXST/00-05 FXDWG1984-1999 FXST, FXDWG2000-2006 FXSTS2008-2010 FXDF2006-2007 FXDWG2008-2013 FXD/B/C/L2002-2007 V-ROD23” x 3.50”2008-2013 FLTR/FLHT/FLHR (Non ABS)2008-2013 FLTR/FLHT/FLHR, S/D, Non-ABS2008-2013 FLTR/FLHT/FLHR (ABS)2000-2007 FLTR/FLHT/FLHR2000-2007 FLTR/FLHT/FLHR, S/D1984-1999 FLTR/FLHT/FLHR2007-2013 FXST2011-2013 FXST, ABS2000-2006 FXST/00-05 FXDWG1984-1999 FXST, FXDWG2000-2006 FXSTS2002-2007 V-RODNess Motorcycle26” x 3.50”2008-2013 FLTR/FLHT/FLHR (Non ABS)2008-2013 FLTR/FLHT/FLHR, S/D, Non-ABS2008-2013 FLTR/FLHT/FLHR (ABS)2000-2007 FLTR/FLHT/FLHR2000-2007 FLTR/FLHT/FLHR, S/D

40 FRONT WHEEL APPLICATIONS

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

$1,899.95 $1,399.95$1,399.95$1,299.95$1,699.95$1,599.95$1,299.95$1,199.95$1,299.95$1,199.95$1,199.95

$1,899.95 $1,599.95$1,599.95$1,499.95$1,899.95$1,799.95$1,499.95$1,399.95$1,499.95$1,399.95$1,399.95

10-GAUGE WHEEL PRICINGG3 & ENGRAVED WHEEL PRICING

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

..............................................................

26” x 3.50”23” x 3.50”21” x 3.50”21” x 2.15”18” x 10.50”18” x 8.50”18” x 5.50”18” x 3.50”17” x 6.25”16” x 5.00”16” x 3.50”

26” x 3.50”23” x 3.50”21” x 3.50”21” x 2.15”18” x 10.50”18” x 8.50”18” x 5.50”18” x 3.50”17” x 6.25”16” x 5.00”16” x 3.50”

WHEEL SIZE WHEEL SIZE

16” x 3.50”2008 FLT (NON-ABS)2002-2007 FLT2000-2001 FLT1986-1999 FLT2008-2010 FLSTN/FLSTC2000-2005 FXST/00-07 FLST2000-2005 FXD/FXDWG1986-1999 FX/FL2011-2013 FLSTN/C2011-2013 FLSTN/C ABS2011-2013 XL 482000-2007 XL16” x 5.00”2009-2013 FLT (Non ABS)2009-2013 FLT (ABS)17” x 6.25”2008-2013 FXST/08-10 FLSTF2011-2013 FXST, ABS2011-2013 FLSTF/FB/SB2011-2013 FLSTF/FB/SB, ABS2007 FXST/FLSTF2006 FXST/2006 FLSTFSE18” x 3.50”2008 FLTR/FLHT/FLHR (Non ABS)2008 FLTR/FLHT/FLHR (ABS)2002-2007 FLT2000-2001 FLT1986-1999 FLT2008-2010 FLSTN/FLSTC2000-2005 FXST/00-07 FLST1986-1999 FX/FL2000-2005 FXD/FXDWG2011-2013 FLSTN/C2011-2013 FLSTN/C, ABS2008-2013 XL Except 48 & XR2011-2013 XL 482000-2007 XL18” x 5.502009-2013 FLT 180mm (Non ABS)2009-2013 FLT 180mm (ABS)2008 FLT 180mm (Non ABS)2008 FLT 180mm (ABS)2008-2013 FXST2011-2013 FXST, ABS2008-2013 FXD2006-2007 FXD1986-2007 BIG TWIN/DEUCE2002-2007 V-RODCUSTOM WIDEDRIVE-SIDE18” x 8.50”CUSTOM WIDEDRIVE-SIDE2008-2013 FXCW2011-2013 FXCW, ABS2007 V-Rod 240mm18” x 10.50”CUSTOM WIDENess Motorcycle

011-01039011-01040011-01041011-01042011-01043011-01044011-01045011-01046011-01047011-01048011-01049011-01050

011-02051011-02052

011-03053011-03054011-03055011-03056011-03057011-03058

011-04059011-04060011-04040011-04041011-04042011-04043011-04044011-04046011-04045011-04047011-04048011-04061011-04049011-04050

011-05062011-05063011-05064011-05065011-05066011-05054011-05067011-05068011-05069011-05070011-05071011-05072

011-06071011-06072011-06074011-06075011-06078

011-07071011-07076

012-01039012-01040012-01041012-01042012-01043012-01044012-01045012-01046012-01047012-01048012-01049012-01050

012-02051012-02052

012-03053012-03054012-03055012-03056012-03057012-03058

012-04059012-04060012-04040012-04041012-04042012-04043012-04044012-04046012-04045012-04047012-04048012-04061012-04049012-04050

012-05062012-05063012-05064012-05065012-05066012-05054012-05067012-05068012-05069012-05070012-05071012-05072

012-06071012-06072012-06074012-06075012-06078

012-07071012-07076

021-01039021-01040021-01041021-01042021-01043021-01044021-01045021-01046021-01047021-01048021-01049021-01050

021-02051021-02052

021-03053021-03054021-03055021-03056021-03057021-03058

021-04059021-04060021-04040021-04041021-04042021-04043021-04044021-04046021-04045021-04047021-04048021-04061021-04049021-04050

021-05062021-05063021-05064021-05065021-05066021-05054021-05067021-05068021-05069021-05070021-05071021-05072

021-06071021-06072021-06074021-06075021-06078

021-07071021-07076

022-01039022-01040022-01041022-01042022-01043022-01044022-01045022-01046022-01047022-01048022-01049022-01050

022-02051022-02052

022-03053022-03054022-03055022-03056022-03057022-03058

022-04059022-04060022-04040022-04041022-04042022-04043022-04044022-04046022-04045022-04047022-04048022-04061022-04049022-04050

022-05062022-05063022-05064022-05065022-05066022-05054022-05067022-05068022-05069022-05070022-05071022-05072

022-06071022-06072022-06074022-06075022-06078

022-07071022-07076

032-01039032-01040032-01041032-01042032-01043032-01044032-01045032-01046032-01047032-01048032-01049032-01050

032-02051032-02052

032-03053032-03054032-03055032-03056032-03057032-03058

032-04059032-04060032-04040032-04041032-04042032-04043032-04044032-04046032-04045032-04047032-04048032-04061032-04049032-04050

032-05062032-05063032-05064032-05065032-05066032-05054032-05067032-05068032-05069032-05070032-05071032-05072

032-06071032-06072032-06074032-06075032-06078

032-07071032-07076

10 GAUGE, CHROME

10 GAUGE, BLACK G3, CHROME G3, BLACK ENGRAVED, BLACK

41

WHEE

LS

REAR WHEEL APPLICATIONS

42 BRAKE ROTORS

$299.95$299.95

10-GAUGE black

G3 black

ENGRAVED black

10-GAUGE chrome

G3 chrome black

WHEELS

TWO-PIECE BRAKE ROTORS

NOTE: 1984-2013 FLH & FLT rear OEM rotor must be used (no rear fi tment due to thickness)

11.5”, two-piece brake rotor11.8”, two-piece brake rotor

Arlen Ness fl oating rotors are the ultimate in style and performance. Every detail is tested thoroughly to ensure premium quality and long term use. These rotors are constructed of chrome plated or black anodized billet aluminum carrier and a mirror polished 420 stainless steel rotor. Our two-piece design eliminates vibration associated with early one-piece rotors. The 420 stainless rotors are slotted in order to disperse heat during braking. Sold individually.

02-75102-750

02-74002-739

02-75702-756

02-75302-752

02-75502-754

10 GAUGE, CHROME

10 GAUGE, BLACK G3, CHROME G3, BLACK

ENGRAVED, BLACK

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICSNESS DRIVE PULLEYS

NOTE: Use P/N 28-381($26.95) to mount pulleys on 2007-2008 FLT models. Pulley hardware use P/N 01-920 ($15.95)

43

70T Narrow70T FLHT 2004-200666T 2007-2013 25mm (FLST)66T 2007-2008 25mm (FLT)66T 2007-2013 25mm (DYNA)66T 2007-2013 20mm (FXST/FLSTF)

Arlen Ness billet pulleys are machined in matching patterns to our wheels and machined on both sides for a complete fi nish. Carved from 6061-T6 aluminum and either chrome plated or black anodized. Featuring hard anodized teeth these pulleys offer unmatched strength and durability. Supplied with appropriate hardware and spacers based on theapplication, pulleys arrive with everything you need to install on your bike.

16-96016-96016-96216-96316-96416-965

16-95016-95016-95216-95316-95416-955

16-99016-99016-99116-99316-99216-994

16-97016-97016-97216-97316-97416-975

16-98016-98016-98116-98316-98216-984

$599.95$599.95$599.95$599.95$599.95$599.95

10 GAUGE, CHROME

10 GAUGE, BLACK G3, CHROME G3, BLACK

ENGRAVED, BLACK

10-GAUGE chrome

G3 chrome

10-GAUGE black

G3 black

ENGRAVED black black

black

black chrome

WHEE

LS

DRIVE PULLEYS

44 CALIPER HOUSINGS

FRONT FLT models

FRONT FLT models

WHEELS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

> Ness billet housings give you a new look while accepting your original pistons, seals, pads, and internal hardware> Since the stock calipers work better than ever before, it’s no longer necessary to buy a bunch of unnecessary components> Get the look you want at a fraction of the cost!> Available in chrome or black anodized finish.> Dual disc applications require purchasing the right side and left side calipers separately> Available for most late model applications> Rear Caliper Housing kits require the use of the factory caliper bracket

NESS BILLET BRAKE CALIPER HOUSINGS FOR HD®

2008-2013 FLT MODELS (FRONT ONLY)

2008-2013 SOFTAIL™ & DYNA™ MODELS (FRONT)

00-07 FXST, FLST, FXD, FXDWG, FLHT, FLTR, FLHX and 00-03 XL

2008-2013 SOFTAIL™ & DYNA™ MODELS (REAR)

2007-2013 SPORTSTER™ MODELS (FRONT)

2008-2013 SPORTSTER™ MODELS (REAR)

SEAL KITS

NOTE: Replacement seals are not included. They must be purchased separately.

02-846Left Caliper Housing kit, Chrome




02-848Right Caliper Housing kit, Chrome

02-814Right Caliper Housing kit, Chrome

02-842Rear Caliper Housing kit, Chrome


02-845 Repl. Seal kit for 08-13 FLT (Front) 2 req. per bike

02-820 Repl. Seal kit for 08-13 Dyna & Softail (Front)

02-821 Repl. Seal kit for 2008-2013 Dyna & Softail (Rear)

02-822 Repl. Seal kit for 2007-2013 Sportster (Front)

02-823 Repl. Seal kit for 2007-2013 Sportster (Rear)

02-824 Repl. Seal kit for 2007-earlier FLT (Left/Right)

02-847Left Caliper Housing kit, Black




02-849Right Caliper Housing kit, Black

02-815Right Caliper Housing kit, Black

02-843Rear Caliper Housing kit, Black


45

FOOT

CONT

ROLS

HAND

CONT

ROLS

MOTO

RS /

EXHA

UST

HAND

CONT

ROLS

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$19.95

$19.95

$19.95

$19.95

$19.95

$19.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

FRONT FLT models

FRONT Softail™ / Dyna™

FRONT Sportster™

REAR Softail™ / Dyna™

REAR Sportster™

NEW

WHEE

LS

FOOT CONTROLS

46 FOOT ACCESSORIES

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

47

FOOT CONTROLS: HEEL TOE SHIFTERS / SOLO SHIFTERS / INNER SHIFTERS / SHIFT RODS / BRAKE PEDAL / FLOORBOARDS / FOOTPEGS / EXTENSIONS

FOOT CONTROLS

48 HEEL/TOE & SHIFT KITS

19-793 Retro heel / toe, 19-758 Deep Cut inner shift lever, chrome

19-792 Deep Cut Solo shifter, black w/ 19-759 Deep Cut inner shift lever, black

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Heel/Toe Shifter Kits combine unique design with premium function> CNC machined from 6061-T6 billet aluminum > Available in Deep Cut, Radius w/ Retro pegs, and Radius w/o pegs > Each style has matching brake arm, � oorboards, and many other accessories available separately> Retro without shift peg features universal styling and allows use of any aftermarket shift peg> Deep Cut offered in chrome or black anodize � nish

> Solo shift levers are CNC machined from billet aluminum in the USA > Adds clean style to your foot control section> Offered in chrome or black anodize � nish

> CNC machined from 6061-T6 billet aluminum > Replaces stock shifter rod lever > Finishing touch for your shift section > Offered in chrome or black anodize � nish

HEEL/TOE SHIFT KITS

DEEP CUT SOLO SHIFT KITS

DEEP CUT INNER SHIFT LEVERS

HEEL/TOE SHIFT KITS

SOLO SHIFTER KIT

INNER SHIFT LEVER

19-7911997-2013 FLT & 2000-up FLST, Deep Cut, chrome

19-7931997-2013 FLT & 2000-up FLST, Radius w/ Retro pegs

19-7561997-2013 FLT / FXST / FXD, chrome

19-7581997-2013 FLT, chrome

19-7921997-2013 FLT & 2000-up FLST, Deep Cut, black

19-7901997-2013 FLT & 2000-up FLST,Radius w/o shift pegs

19-7571997-2013 FLT / FXST / FXD, black

19-7591997-2013 FLT, black





49


19-793 Radius w/ Retro pegs, chrome

19-790 Radius w/o shift pegs, chrome


19-793 Radius w/ Retro pegs, chrome Radius w/ Retro pegs, chrome

19-756 19-756 Deep Cut, chrome

MOTO

RS /

EXHA

UST

19-757 19-757 Deep Cut, black

LIGHT

S / EL

ECTR

ONICS

19-791 Deep Cut, chrome Deep Cut, chrome

19-793 Radius w/ Retro pegs, chrome Radius w/ Retro pegs, chrome

$324.95

$299.95

$169.95

$99.95

$324.95

$249.95

$169.95

$99.95

19-790 Radius w/o shift pegs, chrome Radius w/o shift pegs, chrome

FOOT CONTROLS

> The cleanest shifter rods available period> Specially designed spherical bearing pressed in for clean look and no unsightly heim joints> CNC machined from 6061-T6 billet aluminum> Show quality chrome or black anodize � nish> Designed to work on all HD® models except FXD / FXR / XL

SHIFTER RODS

19-930Deep Cut round, chrome

19-914Engraved, chrome

19-932Beveled, chrome

19-936Beveled, chrome (for Sportster™ 48 only)

19-934Deep Cut Round, chrome (for Sportster™ 48 only)

19-912Deep Cut � at, chrome

19-916Holeshot, black

19-931Deep Cut round, black

19-915Engraved, black

19-933Beveled, black

19-937Beveled, black (for Sportster™ 48 only)

19-935Deep Cut Round, black (for Sportster™ 48 only)

19-913Deep Cut � at, black

BIG-TWIN MODELS

50 SHIFTER RODS

SPORTSTER™ 48 MODELSNEW

NOTE: Flat style shifter rods (Deep Cut Flat and Engraved) will not � t on Softail™ or Dyna models.

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

19-937 Beveled, black for XL

19-936 Beveled, chrome for XL

19-935 Deep Cut, black for XL

19-934 Deep Cut, chrome for XL



19-931 Deep Cut Round, black

19-930 Deep Cut Round, chrome

19-916 Hole Shot, black

19-914 Engraved, chrome

19-915 Engraved, black

19-912 Deep Cut Flat, chrome

19-913 Deep Cut Flat, black

19-914 19-914 Engraved, chrome

19-915 19-915 Engraved, black

19-912 19-912 Deep Cut Flat, chrome

19-937 19-937 Beveled, black for XL

19-913 19-913 Deep Cut Flat, black 19-913 19-913 Deep Cut Flat, black

19-930 19-930 Deep Cut Round, chrome

19-936 Beveled black for Sportster™, installed

19-932 19-932 Beveled, chrome

19-931 19-931 Deep Cut Round, black

19-937 19-937 Beveled, black for XL 19-937 19-937 Beveled, black for XL

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Machined billet aluminum construction > Available in Deep Cut, Retro, or Radius without shift peg > Retro style that don’t include shift peg features a clean and universal design, and is sold without a shift peg to allow the use of any aftermarket shift peg. > Deep Cut styles are available in chrome or black anodize � nish, Retro styles available in chrome > Made in the U.S.A.

SHIFTER RODS

BRAKE PEDAL KITS

BRAKE PEDALS

19-7731997-2007 FLT, Deep Cut, chrome

19-7522000-2013 FXST, Deep Cut, chrome

19-7742008-2013 FLT, Deep Cut, chrome

19-7502000-2013 FLST, Deep Cut, chrome

19-7772008-2013 FLT, Retro, chrome

19-7542003-2013 FXDWG & 08-13 FXDB, Deep Cut, chrome

19-7681997-2007 FLT, Deep Cut, black

19-7532000-2013 FXST, Deep Cut, black

19-7782008-2013 FLT, Deep Cut, black

19-7512000-2013 FLST, Deep Cut, black

19-7752008-2013 FLT, Radius, chrome (w/o shifter peg)

19-7552003-2013 FXDWG & 08-13 FXDB, Deep Cut, black

51BRAKE PEDALS

19-778 Deep Cut, black installed

19-774 Deep Cut chrome, FLT

19-750 Deep Cut chrome, FLST

19-777 Retro chrome, FLT 19-775 Radius chrome w/o peg, FLT

19-778 Deep Cut black, FLT

19-751 Deep Cut black, FLST

19-778 Deep Cut black, FLT

19-777 19-777 Retro chrome, FLTLIG

HTS /

ELEC

TRON

ICS

$249.95

$279.95

$249.95

$279.95

$229.95

$179.95

$249.95

$279.95

$249.95

$279.95

$199.95

$179.95

FOOT CONTROLS

> The perfect fusion of billet and rubber to provide the best in comfort and style> Each Fusion Series � oorboard is machined from 6061-T6 billet aluminum and features knurled or linear rubber inserts for excellent foot traction. > Each driver � oorboard has 3 different mounting locations giving 3” of adjustability. Allowing you to adjust the � oorboard forward and back to obtain your preferred riding position. > Knurled Rubber � oorboard inserts � t directly into appropriate OEM � oorboard housings> Matching passenger � oorboards are available for each style > Driver � oorboards measure: 13.8” L x 5.0” W; Passenger � oorboards measure: 10.0” L x 4.0” W> Driver � oorboards � t: 84-13 FLT/FLHT/FLTR/H-D FL Trike and 86-13 FLST> Passenger � oorboards � t: 93-13 FLT/FLHT/FLHR/FLTR/H-D FL Trike

FUSION SERIES FLOORBOARDS

DRIVER

PASSENGER

KNURLED FLOORBOARD INSERTS

15-400 Deep Cut Fusion, chrome




15-411 Smoothie, chrome

15-415 Ring Leader, chrome


15-401 Deep Cut Fusion, black


15-403 Smoothie, black


15-407 Ring Leader, black







06-782 FLT

06-783 FLHT / FLHX



15-409 Beveled chrome driver and 15-420 Beveled chrome passenger boards

06-782 Knurled for FLT 06-783 Knurled for FLHT/FLHX

52 FUSION FLOORBOARDS

NEW

$399.95

$399.95

$299.95

$299.95

$299.95

$299.95

$299.95

$399.95

$399.95

$399.95

$399.95

$399.95

$399.95

$399.95

$399.95

$299.95

$299.95

$299.95

$79.95

$79.95

$299.95

$299.95

06-783 Knurled for FLHT/FLHX 06-782 Knurled for FLT

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

FUSION SERIES FLOORBOARDS 15-400 Deep Cut Fusion, chrome










15-405 Slot Track, black 15-404 Slot Track, chrome

15-402

15-407 Ring Leader, black 15-406 Ring Leader, chrome

15-410 Beveled, black 15-409 Beveled, chrome

Deep Cut Fusion, black

53

15-402 Smoothie, chrome 15-402 Smoothie, chrome

Ring Leader, chrome

FOOT

CONT

ROLS 15-403 Smoothie, black

Ring Leader, black

Deep Cut Fusion, chrome

FOOT CONTROLS

> Cutting-edge design from Arlen Ness> Machined from two pieces of billet aluminum to create an all new see-thru design> A great way to add exceptional style and comfort to your bike> Available in chrome or black anodize � nish> Designed to � t 86-13 FLST, 94-10 FLHR and 82-13 FLT models> Kits include all mounting hardware> Driver � oorboards: 18”L x 5.75”W x 1”thick > Passenger � oorboards: 7”L x 4”W x 1”thick

DEEP CUT FLOORBOARDS FOR BAGGER

DRIVER

PASSENGER

06-838Deep Cut, chrome

06-8371986-2012 FLT Deep Cut, chrome

06-839FLHX/Universal Peg Mount, chrome

06-833Deep Cut, black

06-8311986-2012 FLT Deep Cut, black

06-834FLHX/Universal Peg Mount, black

06-833 Deep Cut, black driver floorboards

06-833 Deep Cut driver , black

06-831 Deep Cut passenger, black

06-838 Deep Cut driver, chrome

06-837 Deep Cut passenger, chrome

54 DEEP CUT FLOORBOARDS

DRIVER

PASSENGER

06-838Deep Cut, chrome

06-833Deep Cut, black

Deep Cut driver, chrome

Deep Cut passenger, chrome

$499.95

$399.95

$399.95

$499.95

$399.95

$399.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

DEEP CUT FLOORBOARDS FOR BAGGER> Styled to match the Arlen Ness Retro line> Constructed from chrome plated billet aluminum> Full length rubber inserts offer excellent grip and comfort> Designed to FLT 1982-2013 FLT/FLHT/FLHR and 1986-2013 FLST models> Matching passenger boards are designed for 1993-2013 FLT models> Driver � oorboards: 18”L x 6”W x .75”thick > Passenger � oorboards: 7”L x 4”W x .75”thick

RETRO FLOORBOARDS

06-842Retro Driver Floorboards, chrome

06-843Retro Passenger Floorboards, chrome

06-842 Retro driver floorboards

06-843 Retro passenger floorboards

06-842 Retro driver floorboards shown w/ matching shift

RETRO FLOORBOARDS 55

$449.95

$319.95

FOOT CONTROLS

07-909 Deep Cut Fusion, black w/ 07-919 shift peg

07-925 Knurled Fusion, black w/ 07-927 shift peg

07-921 Smooth Fusion, black w/ 07-923 shift peg

07-908 Deep Cut Fusion, chrome w/ 07-918 shift peg

07-924 Knurled Fusion, chrome w/ 07-926 shift peg

07-920 Smooth Fusion, chrome w/ 07-922 shift peg

07-901 Slot Track Fusion, black w/ 07-911 shift peg

07-900 Slot Track Fusion, chrome w/ 07-910 shift peg

07-907 Ring Leader Fusion, black w/ 07-917 shift peg

56 FUSION FOOTPEGS

07-909 07-909 Deep Cut Fusion, black w/ 07-919 shift peg 07-908 07-908 Deep Cut Fusion, chrome w/ 07-918 shift peg

07-900 07-900 Slot Track Fusion, chrome w/ 07-910 shift peg

07-901 07-901 Slot Track Fusion, black w/ 07-911 shift peg

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> The perfect fusion of traction, style, and comfort > Footpegs & Shifter pegs are machined from billet aluminum and wrapped in either diamond knurled or linear style rubber for excellent foot traction. > Knurled style footpegs are made from a forged steel shaft, knurled style rubber for excellent traction, and billet aluminum accents for a clean look. Shift pegs are made from molded rubber with an integrated mounting stud and billet aluminum accent.> Matching grips, � oorboards, and shifter pegs are available for each style

FUSION FOOTPEGS & SHIFTER / BRAKE PEGS

FOOTPEGS

SHIFTER / BRAKE PEG

07-908

07-909

07-924

07-925

07-906

07-907

07-900

07-901

07-920

07-921

07-928

07-929

07-918

07-919

07-926

07-927

07-916

07-917

07-910

07-911

07-922

07-923

07-930

07-931

Deep Cut, chrome

Deep Cut, black

Knurled, chrome

Knurled, black

Ring Leader, chrome

Ring Leader, black

Slot Track, chrome

Slot Track, black

Smooth, chrome

Smooth, black

Beveled, chrome

Beveled, black

Deep Cut, chrome

Deep Cut, black

Knurled, chrome

Knurled, black

Ring Leader, chrome

Ring Leader, black

Slot Track, chrome

Slot Track, black

Smooth, chrome

Smooth, black

Beveled, chrome

Beveled, black

07-909 Deep Cut Fusion footpegs w/ Deep Cut Fusion shifter peg (07-919)

07-929 Beveled Fusion, black w/ 07-931 shift peg

07-928 Beveled Fusion, chrome w/ 07-930 shift peg 07-906 Ring Leader Fusion, chrome w/ 07-916 shift peg

57

$89.95

$89.95

$49.95

$49.95

$69.95

$69.95

$89.95

$89.95

$59.95

$59.95

$89.95

$89.95

$29.95

$29.95

$19.95

$19.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

$29.95

FOOT CONTROLS

Our billet and rubber Soft-Touch Series foot and shifter pegs provide great styling with excellent foot traction. Machined from 6061-T6 billet aluminum. These pegs are made from the � nest materials available.> Available with dimpled or knurled style rubber > Available in chrome or black anodized � nishes> Matching Grips pg. 73

SOFT-TOUCH BILLET FOOTPEGS & SHIFTER PEGS

FOOTPEGS

SHIFTER / BRAKE PEG

06-120Scalloped, chrome, knurled rubber, pair

06-154Engraved, chrome, dimpled rubber, pair

06-150Scalloped, chrome, dimpled rubber, pair

06-158Smooth, chrome, dimpled rubber, pair

06-122Scalloped, chrome, knurled rubber, each

06-155Engraved, chrome, dimpled rubber, each

06-151Scalloped, chrome, dimpled rubber, each

06-159Smooth, chrome, dimpled rubber, each

06-121Scalloped, black, knurled rubber, pair

06-156Engraved, black, dimpled rubber, pair

06-152Scalloped, black, dimpled rubber, pair

06-160Smooth, black, dimpled rubber, pair

06-123Scalloped, black, knurled rubber, each

06-157Engraved, black, dimpled rubber, each

06-153Scalloped, black, dimpled rubber, each

06-161Smooth, black, dimpled rubber, each

materials available.

06-150

Scalloped, black, dimpled rubber, pair

Smooth, black, dimpled rubber, pair

Scalloped, chrome, knurled rubber, each

06-160 Smooth, black w/ 06-161 shift peg

06-152 Scalloped Dimpled, black w/ 06-153 shift peg

06-156 Engraved, black w/ 06-157 shift peg

06-121 Scalloped Knurled, black w/ 06-123 shift peg

06-116 Deep Cut Comfort, black w/ 06-119 shift peg

06-158 Smooth, chrome w/ 06-159 shift peg

06-150 Scalloped Dimpled, chrome w/ 06-151 shift peg

06-154 Engraved, chrome w/ 06-155 shift peg

06-120 Scalloped Knurled, chrome w/ 06-122 shift peg

06-115 Deep Cut Comfort, chrome w/ 06-118 shift peg

> Unique billet conical foot & shift peg bodies are machined to perfection and � nished in chrome or black anodize � nish> Innovative rubber inserts have a soft air cushion feel that dampens vibration for a comfortable ride> Matches Deep Cut Comfort grips the Ness line of Deep Cut accessories> Available in chrome or black anodize � nish

DEEP CUT COMFORT FOOTPEGS & SHIFTER PEGS

FOOTPEGS

SHIFTER / BRAKE PEG

06-115 Deep Cut Comfort, chrome


06-116 Deep Cut Comfort, black


06-115 06-115 Deep Cut Comfort, chrome w/ 06-118 shift peg 06-116 06-116 Deep Cut Comfort, black w/ 06-119 shift peg

58 SOFT TOUCH & COMFORT PEGS

$79.95

$89.95

$89.95

$89.95

$29.95

$34.95

$29.95

$29.95

$79.95

$89.95

$89.95

$89.95

$29.95

$34.95

$29.95

$29.95

$79.95

$29.95

$79.95

$29.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

SOFT-TOUCH BILLET FOOTPEGS & SHIFTER PEGS> Innovative styles complete the look of your bike> Matching shifter pegs and grips available separately> All pegs are machined from 6061-T6 billet aluminum and � nished in chrome or black anodize.> Matching grips on page 72

ORIGINAL BILLET FOOTPEGS & SHIFTER / BRAKE PEGS

FOOTPEGS

06-472

06-470

07-484

06-460

06-475

07-482

07-480

07-460

07-466

06-410

Deep Cut, black

Deep Cut, chrome

Flamed, black

Flamed, chrome

Diamond Flat-Band, chrome

Battistini Oval, black

Battistini Round, black

Battistini Round, chrome

Battistini Oval, chrome

Knurled, chromeSHIFTER / BRAKE PEG

06-473

06-471

07-485

06-462

06-477

07-468

07-483

07-481

07-462

06-413

Deep Cut, black

Deep Cut, chrome

Flamed, black

Flamed, chrome

Diamond Flat-Band, chrome

Battistini Oval, chrome

Battistini Oval, black

Battistini Round, black

Battistini Round, chrome

Knurled, chrome

06-309 Flamed; Diamond Flat-Band; Knurled

REPLACEMENT RUBBERS (FOOT)

REPLACEMENT RUBBERS (SHIFT/BRAKE)

06-308

06-328

Flamed; Knurled

Diamond Flat-Band

07-466 Battistini Oval, chrome w/ 07-468 shift peg

06-460 Flamed, chrome w/ 06-462 shift peg

06-470 Deep Cut, chrome w/ 06-471 shift peg

06-410 Knurled, chrome w/ 06-413 shift peg

07-460 Battistini Round, chrome w/ 07-462 shift peg

07-482 Battistini Oval, black w/ 07-483 shift peg

07-484 Flamed, black w/ 07-485 shift peg

06-472 Deep Cut, black w/ 06-473 shift peg

06-475 Diamond Flat-Band w/ 06-477 shift peg

07-480 Battistini Round, black w/ 07-481 shift pegBattistini Round, chrome w/ 07-462 shift peg 07-480

Battistini Oval, black w/ 07-483 shift peg

DEEP CUT COMFORT FOOTPEGS & SHIFTER PEGS

59BILLET FOOTPEGS

06-410 06-410 Knurled, chrome w/ 06-413 shift peg

$139.95

$139.95

$139.95

$99.95

$99.95

$139.95

$139.95

$139.95

$139.95

$99.95

$12.95

$12.95

$49.95

$49.95

$49.95

$36.95

$39.95

$54.95

$54.95

$54.95

$54.95

$34.95

$4.95

FOOT CONTROLS

60

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Rad II style reservoir is a direct replacement for the factory unit> Die cast aluminum construction> Chrome plated

RAD II MASTER CYLINDER RESERVOIR FOR 99-07 FLT

07-6481999-2007 Master cylinder reservoir

> Kit moves factory � oorboards forward by 2”> Provides extra leg room and comfort for taller riders> Steel relocation brackets utilize factory mounting hardware> Designed to work on 1983-up FLT models> Available in either black powder coat or chrome

2” FLOORBOARD EXTENSIONS FOR FLT

07-6071983-2008 FLT, chrome

07-6061983-2008 FLT, black

07-6082009-up FLT, black

> Moves factory foot controls 3” forward to increase leg room> Includes: black anodized billet aluminum adapter plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring pin, bracket for 2004-up models and necessary hardware

3” EXTENSIONS FOR SOFTAIL™ CONTROLS

07-6102000-2006 Softail™

07-6162011-2013 Softail™ w/ ABS

07-613Replacement brake line 2007-2013 Softail™

07-6112007-2013 Softail™

07-612Replacement brake line 2000-2006 Softail™

07-617Replacement brake line for 2011-2013 Softail™ w/ ABS

07-648 RAD II uninstalled

BOARD POSITIONWITH NESS

EXTENSION KIT

STOCK BOARD POSITION

07-610 3” Extensions for Softail™ models

07-607 2” Floorboard extensions for FLT

07-648 RAD II Master Cylinder reservoir

RETRO FLOORBOARDS 61

$49.95

$169.95

$149.95

$169.95

$199.95

$199.95

$79.95

$199.95

$79.95

$79.95

HAND CONTROLS

62

HAND CONTROLS: MODULAR BARS / HANDLEBARS / CABLE CLAMPS / DAMPER KITS /HAND CONTROLS / GRIPS / MIRRORS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

63

> Design, function and adjustability> Our innovative 1-1/4” steel handlebars feature billet aluminum junction clamps that rotate towards or away from the rider for their desired comfort needs. > All bars are drilled and slotted for internal wiring for cable or FBW applications> Drag bars bolt-on directly to 3-1/2” bolt centers for most all HD models (except Bagger models)> Bagger Apes and Mini Apes include 3-1/2” on center knurling to � t most HD applications> Available in chrome and black for most HD models

CHROME

BLACK

08-97013” Bagger Apes for FLHT, FLHX, chrome

08-9758” Modular Drag Bars, chrome

08-97612” Modular Drag Bars, chrome

08-96210” Mini Apes for ALL Dyna™, XL & Softail™ (except FXSTS, FLSTS, FXS models ) black

08-97210” Mini Apes for ALL Dyna™, XL & Softail™ (except FXSTS, FLSTS, FXS models ) chrome

08-96013” Bagger Apes for FLHT, FLHX, black

08-9658” Modular Drag Bars, black

08-96612” Modular Drag Bars, black

MODULAR HANDLEBARS (PATENT PENDING)

COMFORT 45° customizable rotation

HAND CONTROLS

NESS MODULAR HANDLE BAR DIMENSIONS

P/N CENTER WIDTH WIDTH RISE PULLBACK DIAMETER

08-96008-97608-97208-97508-97008-96608-96208-965

15”3-1/2”

10”3-1/2”

15”3-1/2”

10”3-1/2”

36”26”35”25”36”26”35”25”

13”12”10”8”

13”12”10”8”

8”8”5”5”8”8”5”5”

1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”

$499.95

$499.95

$499.95

$499.95

$459.95

$459.95

$399.95

$399.95

08-962 10” Modular Mini-Apes, black / 08-972 chrome

08-965 8” Modular Drag Bars, black / 08-975 chrome

08-966 12” Modular Drag Bars, black / 08-976 chrome

08-960 13” Modular Bagger Apes, black / 08-970 chrome

64 MODULAR HANDLEBARS

MODULAR HANDLEBARS (PATENT PENDING)

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

DIAMETER

08-970 13” Modular Bagger Apes, chrome

08-962 10” Modular Mini Apes, black

08-966 12” Modular Drag Bars, black

65

HAND CONTROLS

$234.95

$169.95

$89.95

$234.95

$234.95

$234.95

> Brought back by popular demand.> Looks and feels great!

> Curvaceous styling> Looks great on any application> Nice � owing transition from triple trees to hand controls

> These are the famous Ness-Drag Bars> Available in 1”

> These bars can be used on most 1982-2013 applications> Available in 1” only

> These are a re-make of the � rst product Arlen ever made in 1970> Smooth curvaceous bends> Excellent comfort

08-021Fly-Bars with indents

08-006Fat-Bob Drag bars with indents

08-0161” Flat Track with indents

08-033Ram-Hi with indents

08-032Ram-Lo with indents

08-022Lowrider with indents

1-1/4” FLY BARS

1” FAT-BOB LATE STYLE DRAG BARS

1” FLAT TRACK BARS w/ INDENTS

1-1/4” RAM BARS

1-1/4” LOWRIDER BARS

DIMENSIONS: center width: 5”, w: 25-1/4”, rise: 8-1/2”, pull: 10-1/2”, diameter 1”

DIMENSIONS: center width: 5-1/2”, w: 29-1/4”, rise: 4-1/2”, pull: 8”, diameter 1”

DIMENSIONS: center width: 3-1/2”, w: 30-1/4”, rise: 12-1/2”, pull: 10-1/4”, diameter 1-1/4”

DIMENSIONS: center width: 3-1/2”, w: 30-1/4”, rise: 10-3/4”, pull: 11-1/2”, diameter 1-1/4”

DIMENSIONS: center width: 3-1/2”, w: 29-1/2”, rise: 12”, pull: 12-1/4”, diameter 1-1/4”

DIMENSIONS: center width: 3-1/2”, w: 29-1/2”, rise: 12”, pull: 12-1/4”, diameter 1-1/4”

08-021 1-1/4” Flybar w/ indents

08-032 1-1/4” Ram-Lo w/ indents

08-022 1-1/4” Lowrider bars

08-006 Fat-Bob Drag bars w/ indents

08-016 1” Flat Track bars w/ indents

1-1/4” Lowrider bars

08-006 08-006 Fat-Bob Drag bars w/ indents

08-032 08-032 1-1/4” Ram-Lo w/ indents1-1/4” Ram-Lo w/ indents

66 HANDLEBARS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> A must when changing to aftermarket handlebars > These polyurethane bushings add a more positive feel to the handlebars while limiting vibration > Our heavy duty cup washers will not bend or distort like factory units> Each kit includes polyurethane bushings, inner steel sleeves, and heavy duty chrome cup washers > Designed to � t 1984-2013 FLT & FLHT/ 1973-up FX, FXR, Dyna™, & XL (Except 04-10 XL, Springer Deuce). Also � ts most aftermarket triple tree’s

> The cleanest way to mount your handlebars on your stock or custom triple tree application> The cup washers provided in this kit are machined from 303 stainless steel and polished to a chrome-like � nish> Flush mount lower cup washer conceals the provided hardware for a superior look > Our USA made polyurethane bushings eliminate � exing and isolate vibration> These kits include two lower � ush mount cup washers, two heavy wall top cup washers, four custom polyurethane bushings, two inner sleeves & � ne or coarse allen hardware> 1973 & up Softail™, FX, FXR, Dyna™ & XL Models (except 04-10 XL, Springer Deuce models) Also � ts most custom triple tree applications

HANDLEBAR DAMPER KITS

FLUSH MOUNT HANDLEBAR DAMPENING KIT

08-029 Ness Damper kit for Baggers

08-005 Damper kit for FX, Dyna™ & XL

08-004 Flush mount kit, � ne thead

08-002 Flush mount kit, coarse thead

20-298 Coned throttle housing, chrome

20-278 Grooved false housing w/ switch

20-275 Radius false housing w/ switch

> Available in 3 styles: Coned Die-Cast, Billet Radius, and Billet Grooved > Coned die-cast style available in single throttle cable applications > Radius and Grooved billet styles are available in single cable, false, and switch style applications > Chrome � nish

> CNC machined from 6061-T6 billet aluminum > Available in Grooved or Radius styles> Best way fasten your single or dual throttle cables and clutch cable> Chrome � nish

THROTTLE HOUSINGS

20-283 Single cable housing, Radius

20-297 Switch style, single cable housing, Grooved

20-287 Switch style, single cable housing, Radius

CABLE CLAMPS FOR V-TWIN

RADIUS GROOVED

03-164 1-1/2” to clutch (all Dyna™ models)

03-163 1-1/4” to throttle

03-161 1-3/8” to clutch

03-162 1-1/4” to dual throttle

03-165 1” to clutch

03-166 1-1/” to clutch

03-167 1-1/4” to clutch

03-169 1” to dual throttle

03-168 1” to throttle

-----

-----

03-17503-176

03-177

03-179

03-178

03-174

03-173

08-029 Damper kit for Bagger models

08-004 Flush mount damper kit

20-283 Radius throttle housing 20-297 Grooved throttle housing 20-298 Coned throttle housing

03-164 Radius cable clamp style 03-174 Grooved cable clamp style

$29.95

$29.95

$49.95

$49.95

$36.95

$79.95

$104.95

$59.95

$89.95

$89.95

$24.95

$24.95

$24.95

$24.95

$24.95

$24.95

$24.95

$24.95

$24.95

67HANDLEBAR ACCESORIES

08-740

08-741

08-860

08-743

08-750

08-751

08-752

08-755

08-756

08-865

08-895

08-896

08-897

08-890

08-891

08-892

9/16” brake m/c (w/ lever), chrome

11/16” brake m/c (w/ lever), chrome

15mm brake m/c (w/ lever), chrome

Cable clutch perch (w/ lever), chrome

Replacement clutch lever, chrome

Replacement brake lever, chrome

Replacement brake m/c cover, chrome

9/16” complete rebuild kit

11/16” complete rebuild kit

15mm complete rebuild kit

96-12 FXST, FXD, XL, 9/16”, single disc

96-12 FXST, FXD, XL & 96-07 FLT 11/16”, dual disc

08-13 FLT, 15mm, single disc

96-12 FXST, FXD, XL, 9/16”

96-12 FXST, FXD, XL & 96-07 FLT 11/16”

08-13 FLT, 15mm

HAND CONTROLS

$189.95

$189.95

$189.95

$99.95

$27.95

$27.95

$34.95

$39.95

$39.95

$39.95

$299.95

$299.95

$299.95

$299.95

$299.95

$299.95

BLACK

> Arlen Ness presents the industry’s first full custom factory replacement hand controls> An evolution of our popular RAD II hand controls, the RAD III controls are guaranteed to give your stock handlebars a great new look> Each kit includes the complete handlebar master cylinder, left side clutch lever housing and clutch lever.> These controls are designed to work with the factory switch housings, clutch cable and brake hose assemblies> Available for single or dual disc 1996-2013 models in chrome or satin black finishes. *Does not fit models with hydraulic clutch master cylinders> Replacement parts available separately

RAD III HANDLEBAR CONTROL KITS

CHROME

ACCESSORIES 08-890 RAD III, black installed

08-895 RAD III, chrome installed

08-890 RAD III, black and (08-895) RAD III, chrome

68 RAD III CONTROLS

new look

08-890 08-890 RAD III, black and (08-895) RAD III, chrome

08-724

08-725

08-709

08-730

08-731

08-717

08-707

08-713

08-704

08-711

08-620

08-622

06-659

06-625

08-621

08-732

08-733

9/16” brake m/c, chrome

11/16” brake m/c, chrome

11/16” hyd. brake m/c, chrome

9/16” brake m/c, black

11/16” brake m/c, black

11/16” hyd. brake m/c, black

Retro cable clutch perch, chrome

Retro cable clutch perch, black

3-button switch block, chrome, ea.

3-button switch block, black, ea.

9/16” m/c rebuild kit

11/16” m/c rebuild kit

11/16” hyd. clutch rebuild kit

Potted switch w/ 30” wire leads

Button, each

Clutch lever, chrome

Clutch lever, black

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

08-726 Retro hand controls, black

08-720 Retro hand controls, chrome

$444.95

$444.95

$415.95

$415.95

$415.95

$415.95

$292.95

$292.95

$164.95

$164.95

$39.95

$39.95

$59.95

$29.95

$6.95

$99.95

$109.95

$699.95

$875.95

$699.95

$699.95

$833.95

$875.95

$699.95

$833.95

> Innovative Retro styling with modern day technology> All components machined from 6061-T6 billet aluminum> 9/16” and 11/16” size master cylinders available> Hydraulic clutch kits feature an 11/16” clutch master cylinder for easy effort and great feel at the lever> Three button switch blocks are available and can be used on either the brake or clutch side control> Available in chrome or black anodize � nish

RETRO HANDLEBAR CONTROL KITS

08-7209/16” master cylinder, Cable Clutch

08-72311/16” master cylinder, Hydraulic Clutch







CHROME

BLACK

ACCESSORIES

RAD III HANDLEBAR CONTROL KITS 08-720 Retro chrome and (08-729) Retro black

69RAD II CONTROLS

> The perfect fusion of grip, style and comfort > Each rubber grip design features excellent traction for your hands to take full control of your motorcycle> All of our billet aluminum accents are intricately machined into pieces of art and later � nished in � awless chrome or black anodizing> DC, Port Hole and Smooth designs feature 1-1/4” billet aluminum inner collars, diamond knurled rubber grips and billet aluminum end caps> Slot Track design features 1-1/4” billet aluminum inner collars with an air cushion rubber thumb pad, linear knurled rubber grips and slotted billet aluminum end caps> Knurled rubber design features diamond knurled grips with integrated billet end caps for a clean design> Ring Leader design features a linear knurled rubber grip with integrated air pillows for extreme comfort. Collars, rings and end caps are machined from billet aluminum for an excellent look> All kits include an installed throttle sleeve, grip glue and simple to follow instructions > Styles available in chrome or black anodize � nishes for cable or Fly by Wire applications > Matching footpegs and shifter pegs are available separately. See pg. 56-57

NESS FUSION SERIES GRIPS

CABLE STYLE FLY-BY WIRE

07-316

07-317

07-324

07-325

07-320

07-321

07-312

07-313

07-305

07-300

07-301

07-330

07-331

07-318

07-319

07-326

07-327

07-322

07-323

07-314

07-315

07-307

07-302

07-303

07-328

07-329

Deep Cut, chrome

Deep Cut, black

Knurled, chrome

Knurled, black

Smooth, chrome

Smooth, black

Ring Leader, chrome

Ring Leader, black

Port Hole, black

Slot Track, chrome

Slot Track, black

Beveled, chrome

Beveled, black

07-331 Beveled Fusion, black

07-301 Slot Track Fusion, black

07-320 Smooth Fusion, chrome installed

HAND CONTROLS

$89.95

$89.95

$49.95

$49.95

$59.95

$59.95

$69.95

$69.95

$79.95

$89.95

$89.95

$89.95

$89.95

70 FUSION GRIPS

NESS FUSION SERIES GRIPS

FLY-BY WIRE

07-330 Beveled Fusion, chrome

07-324 Knurled Fusion, chrome


07-300 Slot Track Fusion, chrome

07-321 Smooth Fusion, black

07-325 Knuled Fusion, black

07-313 Ring Leader Fusion, black

07-301 Slot Track Fusion, black

07-320 Smooth Fusion, chrome


07-312 Ring Leader Fusion, chrome

07-305 Port Hole Fusion, black

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

71

> Arlen Ness was the � rst billet grip manufacturer; these original styles are machined from 6061-T6 billet aluminum > Roller bearings are pressed into each cable style grip, allowing for smoother function and less “stiction”> Available in chrome or black anodize � nish, Cable and some FBW applications available> Matching foot and shift pegs are available for each style> Sold in pairs> Available in chrome or black anodize � nish

ORIGINAL BILLET GRIPS

CABLE STYLE FLY-BY WIRE

REPLACEMENT RUBBER

ACCESSORIES

07-130

07-132

07-103

07-142

07-133

07-102

07-138

07-146

07-141

07-149

07-242

07-244

-----

07-241

07-230

-----

07-233

07-235

-----

-----

07-110

07-099

07-110

-----

Deep Cut, chrome

Deep Cut, black

Flamed, chrome

Flamed, black

Horizontal

Knurled

Battistini Round, ch

Battistini Round, blk

Battistini Oval, ch

Battistini Oval, blk

Knurled

Throttle Bearing

REPLACEMENT RUBBER

ACCESSORIES

Battistini Oval, blk

Knurled

Throttle Bearing


07-142 Flamed, black

07-146 Battistini Round, black

07-149 Battistini Oval, black


07-103 Flamed, chrome

07-138 Battistini Round, chrome 07-133 Horizontal, chrome

07-141 Battistini Oval, chrome 07-102 Knurled, chrome

HAND CONTROLS

$159.95

$159.95

$129.95

$139.95

$99.95

$129.95

$149.95

$149.95

$149.95

$149.95

$9.95

$24.95

72 BILLET GRIPS

ORIGINAL BILLET GRIPS

FLY-BY WIRE

Our billet and rubber Soft-Touch Series grips add style, comfort, and excellent grip. These grips are made in the USA from the � nest materials available such as Kraton rubber and machined 6061-T6 billet aluminum. Throttle sleeve is included with each grip set for cable or � y-by wire applications. Matching foot pegs and shifter pegs are also available. See pg. 58

2008-2013 FLT

1976-2013 BIG-TWIN / XL

07-072 Scalloped, chrome, knurled rubber, pair

07-087Engraved, chrome, dimpled rubber, pair

07-083Scalloped, chrome, dimpled rubber, pair

07-091Smooth, chrome, dimpled rubber, pair

07-070 Scalloped, chrome, knurled rubber, each

07-086Engraved, chrome, dimpled rubber, each

07-082Scalloped, chrome, dimpled rubber, each

07-090Smooth, chrome, dimpled rubber, each

07-073 Scalloped, black, knurled rubber, pair

07-089Engraved, black, dimpled rubber, pair

07-085Scalloped, black, dimpled rubber, pair

07-093Smooth, black, dimpled rubber, pair

07-071 Scalloped, black, knurled rubber, each

07-088Engraved, black, dimpled rubber, each

07-084Scalloped, black, dimpled rubber, each

07-092Smooth, black, dimpled rubber, each

SOFT-TOUCH GRIPS07-091 Smooth, chrome


07-083 Scalloped, Dimpled, chrome


07-072 Scalloped, Knurled, chrome

07-093 Smooth, black


07-085 Scalloped, Dimpled, black


07-073 Scalloped, Knurled, black

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> The stylish blend of form and function> Conical billet grip bodies are machined to perfection and finished in chrome and black anodized finishes > Innovative rubber inserts have a soft air cushion feel that dampens vibration for a comfortable ride. The grips have a slightly larger diameter than stock, which helps with carpal tunnel and hand fatigue during long rides. > Matches our popular Deep Cut line of accessories: Billet Floorboards, Heel/Toe Shifters, Brake Arms, Covers, Exhaust Tips, Speaker Grills, Fork Legs, Fork Boots, Saddlebag Latches, and more

DEEP CUT COMFORT SERIES GRIPS

07-050 Cable style, comfort

07-052 Fly-By-Wire style, comfort

07-051 Cable style, comfort

07-053 Fly-By-Wire style, comfort

CHROME

BLACK

$59.95

$69.95

$59.95

$59.95

$59.95

$69.95

$59.95

$59.95

$59.95

$69.95

$59.95

$59.95

$59.95

$69.95

$59.95

$59.95

$99.95

$99.95

$99.95

$99.95

73COMFORT & SOFT-TOUCH GRIPS

> These are the � nest quality mirrors we have ever offered at any price> Stylish forged billet mirrors heads feature a stainless steel pivot that is pressed into each mirror stem. Hidden triangulated spring plate is mounted behind the convex glass that is guaranteed never to loosen or vibrate out of adjustment. > Forged billet mirror stems available in short or our Patent pending Hanger version for Ape Hanger applications. Our Hanger design can be mounted on top of the handlebar controls or below the handlebar controls on Ape Hanger applications. When ordering Hanger stems for under mount applications, please order the opposite right or left � tment.> Available in chrome or black anodized � nishes> Miscellaneous mounting hardware included> Sold each

ARLEN NESS FORGED BILLET MIRRORS

LEFT

LEFT

SHORT STEM

HANGER STEM

RIGHT

RIGHT

13-146

13-145

13-141

13-140

13-136

13-135

13-131

13-130

13-148

13-147

13-143

13-142

13-138

13-137

13-133

13-132

Curvaceous cats eye, ch

Curvaceous cats eye, blk

Beveled cats eye, ch

Beveled cats eye, blk

Curvaceous cats eye, ch




HAND CONTROLS

13-130/32 Beveled black w/ Short stem

13-131/33 Beveled chrome w/ Short stem

13-135/37 Curvaceous black w/ Short stem 13-136/38 Curvaceous chrome w/ Short stem

> These are the � nest quality mirrors we have ever offered at any price> Stylish forged billet mirrors heads feature a stainless steel pivot that is pressed into each mirror stem. Hidden triangulated that is pressed into each mirror stem. Hidden triangulated spring plate is mounted behind the convex glass that is spring plate is mounted behind the convex glass that is guaranteed never to loosen or vibrate out of adjustment. guaranteed never to loosen or vibrate out of adjustment. > Forged billet mirror stems available in short or our Patent pending Hanger version for Ape Hanger applications. Our pending Hanger version for Ape Hanger applications. Our Hanger design can be mounted on top of the handlebar Hanger design can be mounted on top of the handlebar controls or below the handlebar controls on Ape Hanger controls or below the handlebar controls on Ape Hanger applications. When ordering Hanger stems for under mount applications. When ordering Hanger stems for under mount applications, please order the opposite right or left � tment. applications, please order the opposite right or left � tment.> Available in chrome or black anodized � nishes> Miscellaneous mounting hardware included> Sold each

SHORT STEM

HANGER STEM

Curvaceous cats eye, chCurvaceous cats eye, ch


Curvaceous cats eye, chCurvaceous cats eye, ch

Curvaceous cats eye, blkCurvaceous cats eye, blk



13-130/32 Beveled black w/ Short stem

Curvaceous cats eye, blkCurvaceous cats eye, blk



HAND CONTROLS

13-131/33 Beveled chrome w/ Short stem Curvaceous cats eye, blk

13-131/33 Beveled chrome w/ Short stem

13-136/38 Curvaceous chrome w/ Short stem

NEW

glass dimensions: 4-1/2” W x 2-1/2” H

glass dimensions: 4-1/2” W x 2-1/2” H glass dimensions: 4-1/2” W x 2-1/2” H


$89.95

$89.95

$99.95

$99.95

$79.95

$79.95

$89.95

$89.95

EA.

EA.

74 MIRRORS

ARLEN NESS FORGED BILLET MIRRORS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

13-141/43 Beveled chrome w/ Hangar stem

13-146/48 Curvaceous chrome w/ Hangar stem

13-145/47 Curvaceous black w/ Hangar stem, undermount

13-140/42 Beveled black w/ Hangar stem

13-145/47 Curvaceous black w/ Hangar stem

13-145/47 Curvaceous black w/ Hangar stem



75

HAND CONTROLS

CHROME MIRRORS

LEFTSTYLE RIGHT

13-050

13-058

13-053

13-044

13-040

13-045

13-046

13-030

13-033

13-100

13-068

13-035

13-043

13-050

13-058

13-053

13-044

13-040

13-045

13-046

13-031

13-034

13-100

13-069

13-036

13-043

Vision™

Stealth, Long-Stem

Stealth, Short-Stem

Oval Stepped

Slingshot Grooved

Cat-Eye Softbend, Smooth

Cat-Eye Softbend, Grooved

Pocket Turbo, Grooved

Pocket Turbo, Smooth

Cross (not pictured)

3D Cat-Eye

Teardrop

Slingshot, Smooth

NOTE: Some mirrors not designed to � t both sides of the handlebar. All sold individually.

> Stylish designs for your custom application> Chrome plated or black powder � nish> All styles feature convex glass> Mirrors sold individually> Each mirror includes hardware for Harley and Metric models

MICRO-MIRRORS

LEFT

LEFT

CHROME

BLACK

RIGHT

RIGHT

13-070

13-060

13-406

13-416

13-408

13-410

13-087

13-028

13-412

13-418

13-404

13-400

13-071

13-061

13-407

13-417

13-409

13-411

13-088

13-029

13-413

13-419

13-405

13-401

Flamed

Scoop

Mini-Oval

Four Point

Upswept

RAD II

Flamed

Scoop

Mini-Oval

Four Point

Upswept

RAD II

> Maximum style and visiblity> Chrome plated or black powder � nish > Choose between cast or steel stem, all styles feature convex glass> Each mirror includes hardware for Harley and Metric models> Mirrors sold individually

LEFT

LEFT

CHROME

BLACK

RIGHT

RIGHT

13-090

13-072

13-092

13-082

13-091

13-073

13-093

13-083

RAD III, Cast

RAD III, Steel

RAD III, Cast

RAD III, Steel

RAD III MIRRORS13-072 RAD III steel, chrome

13-082 RAD III steel, black

13-090 RAD III cast, chrome

13-092 RAD III cast, black

glass dimensions: 7” W x 3” H




13-090 13-090 RAD III cast, chrome


13-082 13-082 RAD III steel, black


13-090 13-090 RAD III cast, chrome

RAD III cast, black


13-072 13-072 RAD III steel, chrome

glass dimensions: 7” W x 3” H glass dimensions: 7” W x 3” H

$49.95

$31.95

$28.95

$54.95

$49.95

$49.95

$49.95

$49.95

$49.95

$34.95

$49.95

$34.95

$49.95

$52.95

$49.95

$49.95

$49.95

$49.95

$49.95

$52.95

$49.95

$49.95

$49.95

$49.95

$49.95

$69.95

$49.95

$69.95

$49.95

EA.

EA.

EA.

EA.

EA.

76 MIRRORS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

CHROME MIRRORS

MICRO-MIRRORS


glass dimensions: 4-3/4” W x 2” H glass dimensions: 5” W x 2-1/2” H


glass dimensions: 4-1/4” W x 2-1/4” H glass dimensions: 4-3/4” W x 2” H




glass dimensions: 5” W x 2-1/2” H


RAD III MIRRORS

> Mini-Oval design for your Batwing style fairing> Black powder coated, die-cast design> Integrated design cleans up the look of the stock Bagger> Direct replacement on 2006-2013 FLHX and easily � t on other Bagger models with fairing> Sold in pairs

BAGGER MIRRORS FOR FLT MODELS

13-420Mini-Oval Bagger Mirrors

13-420 Mini-Oval, black


13-400/01 RAD II, black

13-404/05 Upswept, black

13-410/11 RAD II, chrome

13-046 Cat-Eye Softbend, Grooved

13-058 Stealth, Long Stem

13-043 Sling-Shot, Smooth

13-412/13 Mini-Oval, black

13-087/88 Flamed, black

13-406/07 Mini-Oval, chrome

13-045 Cat-Eye Softbend, Smooth

13-053 Stealth, Short Stem

13-030/31 Pocket Turbo, Grooved

13-418/19 Four Point, black

13-408/09 Upswept, chrome

13-416/17 Four Point, chrome

13-068/69 3D Cat-Eye

13-044 Oval, Stepped

13-033/34 Pocket Turbo, Smooth

13-028/29 Scoop, black

13-070/71 Flamed, chrome

13-060/61 Scoop, chrome

13-050 Vision™

13-040 Slingshot, Grooved

13-035/36 Teardrop

13-400/01 13-400/01 RAD II, black Mini-Oval, black

13-087/88 13-087/88 Flamed, black 13-070/71 13-070/71 Flamed, chrome 13-408/09 13-408/09 Upswept, chrome

13-406/07 13-406/07 Mini-Oval, chrome

13-045 13-045 Cat-Eye Softbend, Smooth

13-416/17

13-068/69













glass dimensions: 4-1/2” W x 1-1/2” H glass dimensions: 4-1/4” W x 2-1/4” H glass dimensions: 4-1/4” W x 2-1/4” H glass dimensions: 4-1/2” W x 1-1/2” H glass dimensions: 4-1/2” W x 1-1/2” H

13-420 Mini-Oval, black


$89.95

77

MOTORS / EXHAUST

78 MOTORS & EXHAUST

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

79

MOTORS & EXHAUST: INVERTED AIR CLEANERS / BIG SUCKER™ AIR CLEANERS / VELOCITY STACKS / FUEL TUNERS / EXHAUST / OIL PRESSURE KITS

MOTORS / EXHAUST

80 INVERTED AIR CLEANER

> Constructed from forged billet aluminum > Features the patented Big Sucker™ hidden breather technology. Each hidden breather is o-ringed at the heads and exits at the mouth of the injector/carb to provide efficient engine breathing and a virtually closed loop system. This eliminates the need for any external hoses or hardware> Radius air inlet increases performance by providing unobstructed airflow > Aluminum breather hardware includes specially designed breather bolts and covers for clean mounting

> Inverted Series filters are handmade in the USA> Features pre-oiled black filter element that is encapsulated in a stainless steel jacket for the best in style, filtration, and durability > Each filter features an inverted pleated top with pleated sides maximize airflow by pulling in air from every angle > Inverted filters are washable and re-usable for long lasting performance

> Machined from a single piece of forged billet aluminum for clean style, reduced weight, and improved ergonomics > Features built in velocity stack that not only gives a unique look but also increase performance by forcing air into the filter’s inverted pleated top> Offered in 3 styles: Slot Track, Deep Cut, and Beveled > Available in chrome or black anodize finish

FORGED BILLET ALUMINUM BACKING PLATE

HAND MADE FILTER ELEMENT

FORGEDBILLET ALUMINUM AIR FILTER HOUSINGS

For more than a decade Arlen Ness has led the air cleaner market with our patented Big Sucker™. The new Inverted Series air cleaners combine the patented Big Sucker™ technology and an inverted filter top that maximizes airflow by pulling in air from the face of the air cleaner, as well as the traditional method of pulling air from the sides. Each kit is machined entirely from forged billet aluminum to provide the best in performance and style.

INVERTED SERIES AIR CLEANER KITS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

INVERTED SERIES AIR CLEANER KITS FROM ARLEN NESS

2008-2013 FLT2000-2013 BigTwin (except Fly by Wire)1988-2013 XL Sportster™

Replacement “Black Label” Inverted Filter

> Pre-oiled black stainless steel jacketed filter is handmade in the USA, and features an inverted pleated top with pleated sides to maximize airflow > Forged billet aluminum backing plate features proven radius air inlet, hidden breather hardware, and our industry leading Big Sucker patented technology > Forged billet aluminum air filter housings feature built in velocity stacks > Available in 3 styles: Slot Track, Deep Cut, and Beveled > All mounting hardware, gaskets, and necessary components are included> ** Big Sucker™ covers and accessories can be found on pg.86

18-93218-93418-936

18-93318-93518-937

18-92018-92218-924

18-938 18-938

18-92718-92918-931

18-92618-92818-930

18-92118-92318-925

18-938 18-938 18-938 18-938

SLOT TRACK, CHROMEFITMENT

REPLACEMENT FILTER

DEEP CUT, CHROME BEVELED, CHROMESLOT TRACK, BLACK DEEP CUT, BLACK BEVELED, BLACK

81

NEW







$399.95$399.95$399.95

$64.95

MOTORS / EXHAUST

> One-piece aluminum backing plate features our patented hidden breather technology. Each hidden breather is o-ringed at the heads and exits at the mouth of the injector/crab to provide effi cient engine breathing, eliminating the need for any external hoses or hardware > Radius air inlet provides maximum performance by providing unobstructed airfl ow > Backing plates are available in Standard, Black Powder Coat, or Chrome fi nish

> Each fi lter is handmade in the U.S.A. one at a time using the fi nest materials available > Filters are pre-oiled and feature 4-layers of surgical grade cotton for optimum fi ltration and maximum airfl ow > Unlike most other fi lters, our process of hand pouring each fi lter ensures a strong clean bond between fi lter element and body with no restrictive urethane residue on the fi lter element > Filters are available in red or stainless steel jacketed fi lter elements

> Big Sucker™ Air Cleaner kits are available in 3 stages: Stage 1, Stage 2, and Derby Sucker > Stage 1 kits give the option to use either your OEM air cleaner cover or to install an Arlen Ness custom cover > Stage 2 kits feature a 20% larger fi lter element over Stage 1 for even more airfl ow and require the use of a custom outer cover > Derby Sucker kits feature a 20% larger fi lter element over Stage 1 and allow the use of any 5-hole derby cover

PATENTED HIDDEN BREATHER BACKING PLATE

HAND MADE FILTER ELEMENT

BIG SUCKER™ STAGES

For over a decade the Big Sucker™ has been the best selling and most effi cient air cleaner on the market period. The Big Sucker™ is engineered to give your engine maximum airfl ow, which means more horsepower, more torque, and overall improved performance. Dyno testing has shown the up to a 21 percent gain in horsepower from simply add-ing a Big Sucker™ kit to your V-twin engine.

BIG SUCKER™ AIR CLEANER KITS

82 BIG-SUCKER™ STAGE I

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

18-512 Chrome backing plate / Standard filter

18-512 Chrome backing plate / Standard filter / Smooth chrome cover (18-780)

18-514 Chrome backing plate / Stainless filter / Scalloped chrome cover (18-781)

18-824 Plain Backing Plate / Standard filter XL

18-514 Chrome backing Plate / Stainless filter / Smooth chrome cover (18-780)

18-570 Black backing plate / Stainless filter / Scalloped black cover (18-787)

2008-13 FLT MODELS

99-13 TWIN-CAM(EXC. 99-01 FI FLT &

08-13 FLT)93-99

EVOLUTION1999-2001

FI FLT1988-2013

XL

08-13FXD,

OEM COVER

88-13XL,

OEM COVER

Standard Filter / Plain Backing Plate 18-510 18-557 18-505 18-827* 18-500 18-498 18-803 18-824*Standard Filter / Chrome Backing Plate 18-512 18-524 18-507 18-828* 18-501 18-503 18-822 18-825*Standard Filter / Black Backing Plate 18-560 18-526 18-561 18-829* 18-562 18-563 18-564 18-826*Stainless Filter / Chrome Backing Plate 18-514 18-525 18-515 ----- 18-516 18-517 18-518 -----Stainless Filter / Black Backing Plate 18-570 18-528 18-571 ----- 18-572 18-573 18-574 -----

2008-13 FLT58MM

THROTTLE BODY

BIG SUCKER™ STAGE I AIR FILTER KITS

BIG SUCKER™ STAGE I AIR CLEANER KITS

> Stage 1 kits allow you to choose between using your OEM air cleaner cover or a Ness custom outer cover > Kits that are labeled OEM COVER will only accept stock air cleaner covers only.> Choose between red or stainless steel jacketed pre-oiled fi lters> Backing plates are available in standard, black, or chrome fi nish > Each kit includes a backing plate, fi lter, breather bolts, and all other necessary hardware

* OEM labeled air cleaner kits will ONLY accept factory air cleaner cover** Big Sucker™ covers and accessories can be found on pg.86

83

$129.95$149.95$149.95$169.95$169.95

18-513 Chrome backing plate / Standard filter

18-575 Black backing plate / Stainless filter / Smooth black cover

18-575 Black backing plate / Stainless filter / Scalloped black cover

18-519 Chrome backing plate / Stainless filter / Smooth chrome cover

18-519 Chrome backing plate / Stainless filter / Scalloped chrome cover

18-513 Chrome backing plate / Standard filter / Retro cover

MOTORS / EXHAUST

Standard Filter / Plain Backing Plate 18-511 18-558 18-506 18-499 18-493 18-804Standard Filter / Chrome Backing Plate 18-513 18-555 18-508 18-502 18-504 18-823Standard Filter / Black Backing Plate 18-565 18-527 18-566 18-567 18-568 18-569Stainless Filter / Chrome Backing Plate 18-519 18-556 18-520 18-521 18-522 18-523Stainless Filter / Black Backing Plate 18-575 18-529 18-576 18-577 18-578 18-579

2008-13 FLT MODELS

1993-1999EVO. CARB

1999-2001 FUEL INJECTED FLT 1988-2013 XL

2000-13 TWINCAM (EX. 99-01 FI FLT

& 08-11 FLT)

2008-13 FLT58MM

THROTTLE BODY

BIG SUCKER™ STAGE II AIR FILTER KITS

BIG SUCKER™ STAGE II AIR CLEANER KITS> Requires Ness Stage II custom cover, will not accept OEM outer cover> Choose between red or stainless steel jacketed pre-oiled fi lters> Backing plates are available in standard, black, or chrome fi nish > Each kit includes a backing plate, fi lter, breather bolts, and all other necessary hardware ** Big Sucker™ covers and accessories can be found on pg.86

84 BIG-SUCKER™ STAGE II

$139.95$159.95$159.95$179.95$179.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

2008-13 FLT MODELS

1993-1999EVO. CARB


SS Derby Sucker Kit, ChromeSS Derby Sucker Kit, BlackDerby Sucker Kit, ChromeDerby Sucker Kit, Black


& 08-12 FLT)

2008-13 FLT58MM

THROTTLE BODY

COMPLETE DERBY SUCKER w/o COVER

DERBY SUCKER AIR CLEANER KIT

> Derby Suckers accept any 5-hole derby cover for use as an air cleaner cover, allowing your intake to match your engine covers > Features a 20 % larger fi lter element over Stage 1, will not accept OEM cover> Choose between red or stainless steel jacketed pre-oiled fi lters> Backing plates are available in standard, black, or chrome fi nish > Each kit includes a backing plate, fi lter, breather bolts, and all other necessary hardware

18-37018-37518-38018-385

18-39618-39718-39818-399

18-37118-37618-38118-386

18-37218-37718-38218-387

18-37318-37818-38318-388

18-37418-37918-38418-389

NOTE: Arlen Ness derby covers can be found on pg. 96-97

18-385 shown with Slot Track derby cover(03-493) and point cover (03-495)

85DERBY SUCKER AIR CLEANER

$189.95$189.95$169.95$169.95

MOTORS / EXHAUST

> Cleans, oils, and restores your Big Sucker air fi lter > Over time dirt and debris will collect in fi lter and reduce airfl ow, fi lter tune-up kit will restore fi lters optimum airfl ow> Tune-up kits are available for both red and stainless steel jacketed Big Sucker fi lters > Each kit includes 1 bottle of fi lter cleaner and 1 bottle of fi lter oil

BIG SUCKER™ ACCESSORIES

FILTER TUNE-UP KIT

18-075Clear fi lter oil / Cleaner kit for stainless & black fi lters

18-076Red fi lter oil / Cleaner kit for standard fi lters

Derby Sucker Hardware Kit Derby Sucker Gasket Kitt Standard Replacement Filter Stainless Replacement Filter

DERBY-SUCKER ACCESSORIES & REPLACEMENT FILTERS

18-54418-53618-30118-300

18-78118-78718-78018-76018-76118-06018-58018-59018-53018-53518-08318-08018-585

18-78118-78718-78018-76018-76118-06018-58118-59118-53118-53618-08418-09818-586

18-78118-78718-78018-76018-76118-06018-58218-59218-53218-53618-08418-09818-587

18-78118-78718-78018-76018-76118-06018-58318-59318-53318-53718-08718-09718-588

18-78118-78718-78018-76018-76118-06018-58418-59418-53418-53818-08418-09818-589

18-78118-78718-78018-76018-76118-06018-59518-59618-530

-----18-08318-080

-----

-------------------------

18-060-------------------------

18-04118-586

-------------------------

18-060-------------------------

18-04018-589

18-54418-53618-30118-300

------------------------------

18-54518-53618-30318-302

18-54618-53618-30318-302

18-54718-53218-30518-304

18-54818-53818-30318-302

Backing Plate Only, Plain 18-580 ----- 18-581 18-582 18-583 18-584Backing Plate Only, Chrome 18-585 ----- 18-586 18-587 18-588 18-589Backing Plate Only, Black 18-590 ----- 18-591 18-592 18-593 18-594 Hardware Kit, Stage II 18-539 ----- 18-539 18-541 18-542 18-543Gasket Kit 18-535 ----- 18-536 18-536 18-537 18-538SS Stage II Filter 18-085 18-085 18-086 18-086 18-086 18-086Stage II Filter 18-081 18-081 18-099 18-099 18-099 18-099

STAGE II ACCESSORIES

2008-13 FLT MODELS

1993-1999EVO. CARB



& 08-11 FLT)

2008-13 FLT58MM

THROTTLE BODY

Scalloped Billet Cover, Chrome Scalloped Billet Cover, Black Smooth Billet Cover, Chrome Steel, Smooth Cover, Chrome Steel, Smooth Cover, Black Stage I Pre-Filter Replacement Backing Plate, Plain Replacement Backing Plate, Black Replacement Hardware kit Replacement Gasket kit Replacement SS Filter Replacement Big Sucker Filter Replacement Backing Plate, Chrome

STAGE I ACCESSORIES

* Designed to use stock OEM outer cover ONLY.

2008-13 FLT MODELS

99-13 TWIN-CAM(EXC. 99-01 FI FLT &

08-13 FLT)1993-1999EVOLUTION

1999-2001FI FLT

1988-2013XL

2008-2013FXD,

OEM COVER

1988-2013XL,

OEM COVER

2008-13 FLT58MM

THROTTLE BODY

Stage II Steel Cover, Chrome 18-770 18-770 18-770 18-770 18-770Stage II Steel Cover, Black 18-771 18-771 18-771 18-771 18-771Scalloped Stage II Billet Cover, Chrome 18-794 18-794 18-794 18-794 18-794Scalloped Stage II Billet Cover, Black 18-788 18-788 18-788 18-788 18-788Smooth Stage II Billet Cover 18-795 18-795 18-795 18-795 18-795Stage II Pre-Filter (Rain Sock) 18-061 18-061 18-061 18-061 18-061

18-075 Clear filter oil for Stainless filter 18-076 Red filter oil for Standard filter

86 BIG-SUCKER™ ACCESSORIES

$15.95

$15.95

$49.95$59.95$59.95$35.95$7.95

$79.95$54.95$49.95$49.95

$119.95$119.95$119.95$39.95

$44.95$7.95

$64.95$84.95

$119.95$119.95$119.95$49.95$49.95$39.95$49.95$59.95$34.95$7.95

$69.95$49.95$59.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Twin Sucker air cleaner kits feature twin stainless steel jacketed fi lters for an aggressive look and big performance gains> Utilizes the patented Big Sucker hidden breather aluminum backing plate > Exposed stainless fi lter clamps for industrial style and easy maintenance > Each Twin Sucker fi lter is comprised of 4 layers of surgical grade cotton and then stainless steel for a unique look> Aluminum outer cover is constructed from aluminum > Available in wrinkle black powdercoat fi nish> Each kit includes Big Sucker backing plate, stainless steel jacketed fi lters, stainless steel fi lter clamps, breather bolts, and all other necessary hardware

TWIN SUCKER AIR CLEANER

ACCESSORIES

18-9071993-1999 Evolution

18-9052008-2013 FLT

18-9081999-2001 Twin Cam FLT F.I. models

18-9062000-2013 All Carb & F.I. models, except 00-01’ & 08-13’ FLT

18-9091988-2013 XL Sportster™ models

18-910Replacement fi lter

18-905 Twin Sucker air cleaner

87AIR CLEANER KITS

> The Little Sucker is an affordable way to increase airfl ow and engine performance > A steel backing plate is integrated into the fi lter body > Each steel backing plate features a radius molded urethane air inlet for unobstructed airfl ow that helps increase performance> Kit utilizes factory air cleaner breather hoses and hardware > Accepts OEM/Factory air cleaner cover or Ness Stage 1 custom cover > Made in the USA

LITTLE SUCKER AIR CLEANER KIT

NOTE: Fits behind stock OEM cover or available with custom steel cover.

18-4512000-2013 Big Twin, except 2008-2013 FLT (black cover)

18-4502000-2013 Big Twin, w/ (chrome cover)

18-4532008-2013 FLT (black cover)

18-4522008-2013 FLT (chrome cover)

18-5502000-2013 Big Twin, except 2008-2013 FLT*

18-5512008-2013 FLT*

18-550 Little Sucker air cleaner kit

18-450 Little Sucker air cleaner kit w/ stage I chrome cover

$399.95

$399.95

$399.95

$399.95

$399.95

$114.95

$119.95

$119.95

$119.95

$119.95

$99.95

$99.95

MOTORS / EXHAUST

> Smooth fl owing design changes the look and performance of your bike> These kits include an aluminum Double Barrel outer cover, an aluminum radius inlet backing plate, washable pre-oiled high performance air fi lter and all necessary hardware. > Available in chrome or powder coated black wrinkle fi nish

DOUBLE BARREL AIR CLEANER

CHROME

BLACK

ACCESSORIES

ACCESSORIES

18-9502008-2013 FLT

18-9512008-2012 FLT

18-488EVO / Twin Cam motors, chrome

18-467EVO / Twin Cam motors, black

18-95200-13 Carb & F.I. models, (ex. 00-01; 08-13 FLT & S&S Carb)

18-95300-13 Carb & F.I. models, (ex. 00-01; 08-13 FLT & S&S Carb)

18-489107” and Under S&S motors, chrome

18-468107” and Under S&S motors, black



18-479111” - 124” S&S motors, chrome

18-469111” - 124” S&S motors, black

18-956Replacement fi lter

18-47490º Air fi lter kit pre-fi lter, black

18-47390º Replacement air fi lter, standard

18-47590º Replacement air fi lter, stainless

> Aggressive forward facing intake with smooth lines for a clean look > Aluminum backing plate features our patented hidden breather technology > Red and stainless steel jacketed pre-oiled fi lters are hand made in the USA, and feature 4 layers of surgical grade cotton. > 90° aluminum intake arm and fi lter caps are available in black powdercoat or chrome fi nish > Black kits available with stainless steel jacketed fi lter, chrome kits available with red fi lter> Designed to fi t: 95’-05’ EVO/Twin Cam engines, S&S 107” and under engines, and S&S 111”-124” engines

90º AIR CLEANER KITS

90º AIR FILTER KIT

18-468 90° Air FIlter, black w/ stainless filter

18-950 Double Barrel air cleaner, chrome

18-488 90° Air FIlter, chrome w/ standard filter

88 AIR CLEANER KITS

$249.95

$249.95

$299.95

$299.95

$249.95

$249.95

$299.95

$299.95

$249.95

$249.95

$299.95

$299.95

$29.95

$29.95

$49.95

$69.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Add that radical look to your engine> Both velocity stack and 90 degree brackets feature our patented Big Sucker breather technology> Brackets made to work on stock EVO & Twin Cam Engines (‘99-‘05), S&S 107” and under engines (head breathing) and S&S 111” - 124” engines (case breathing)> Four styles to choose from: 2” Smooth Stack, 2” Battistini Stack, 90° Stack and 90° Air Filter> Pre-fi lters available for extra protection against water and debris> Pre-fi lters do not lower performance of velocity stack kits

VELOCITY STACKS

2” SMOOTH STACK

2” BATTISTINI STACK

90º VELOCITY STACK

ACCESSORIES

NOTE: S&S 113” engines require the S&S 107” and under kits velocity stack kits.

18-481 EVO / Twin Cam motors, chrome



18-480 107” and Under S&S motors, chrome



18-485 111” - 124” S&S motors, chrome

18-478 111” - 124” S&S motors, chrome

18-487 111” - 124” S&S motors, chrome

18-470 90º Velocity stack pre-fi lter, black

18-471 2” Velocity stack pre-fi lter, black

MOTO

RS /

EXHA

UST

COVE

RSLIG

HTS /

ELEC

TRON

ICS

> Put the original Big Sucker fi lter on your Screaming Eagle model for increased airfl ow and performance > Each pre-oiled fi lter is hand poured in the USA, and is available with red or stainless steel jacketed fi lter element> Big Sucker fi lters accept OEM cover or allow the use of Ness Stage 1 custom cover > Derby Sucker fi lters feature 20% larger fi lter element and accept any 5-hole derby cover for added performance and style

STANDARD & DERBY SUCKER FILTERS FOR SCREAMING EAGLE®

18-0302008-2013 FLT

18-0312008-2013 FLT, stainless

18-0981999-2013 FXST, 2002-2007 FLT & 1997-2007 FXD

18-0841999-2013 FXST, 2002-2007 FLT & 1997-2007 FXD, stainless

18-3102008-2013 FLT

18-3112008-2013 FLT, stainless

18-3121999-2013 FXST, 2002-2007 FLT & 1997-2007 FXD

18-3131999-2013 FXST, 2002-2007 FLT & 1997-2007 FXD, stainless

STANDARD

DERBY

18-481 2” Smooth velocity stack

18-483 90° Velocity Stack

BIG-SUCKER air filters for Screaming Eagle® models and air cleaner kits

18-482 2” Battistini velocity stack

90° Velocity Stack

89VELOCITY STACKS & FILTERS

$249.95

$249.95

$249.95

$249.95

$249.95

$249.95

$249.95

$299.95

$249.95

$18.95

$21.95

$49.95

$69.95

$49.95

$69.95

$69.95

$89.95

$69.95

$89.95

MOTORS / EXHAUST

2007-2013 XL Models2007-2013 Big Twin / 2006 Dyna2010-2013 FLT Models2008-2009 FLT Models 2012-2013 FXST & Dyna2006 FI Softail™

1995-2005 F.I. Big Twin

Improving upon the original Big Shot™ the Big Shot II™ now gives the user the ability to add or subtract fuel from the fuel injection system. Using the same load based technology as the original Big Shot™ the Big Shot II™ always knows how much fuel your bike needs whether you’re going uphill, downhill, cruising or even towing a trailer. Even temperature and elevation do not affect the Big Shot II™; essentially only time adjustment is needed is when you modify your engine.

The Big Shot II™ is a plug and play system and does not require the use of a computer or dyno machine to get your bike running great. CARB approved systems are also available for customers living in California.

> Pull up to 10% of fuel out of the system> 16 positions of adjustability> Adjustable to your riding style. Ability to tell the system how much fuel to add and when> 2 year warranty> CARB units feature same technology but have limited adjust ability to remain within CARB standards

The Cheap-Shot™ is an economical solution to add needed fuel after installing exhaust and air cleaner performance upgrades. Our simple splice-in design saves you big money by eliminating costly plug and play connectors found on most other fuel tuners. The Cheap-Shot adjusts much like a carburetor by adjusting four individual pods using an ordinary screw driver.

Our load based technology senses the load on the engine in any riding situation to provide the optimal fuel requirement to the engine. Easy to follow installation instructions are provided.

> Utilizes the latest in load-based technology in fuel injection performance > Comes pre-loaded with base maps for different models that can be fi ne tuned to your individual riding style> Laptops and Dynos are not required > Detects the exact amount of load on the engine at any RPM and at any speed. Delivers the perfect amount of fuel to the engine for optimum performance

BIG-SHOT 2 ADJUSTABLE FUEL TUNER

NESS CHEAP-$HOT™ FUEL TUNER

BIG-SHOT™ ADJUSTABLE FUEL TUNER

49-STATEAPPLICATION

APPLICATION 49-STATE

CA MODELS

CA MODELS

18-65418-65518-65818-65618-65918-651

18-600

18-66418-66518-66818-66618-66918-661

18-611

18-6331995-2006 F.I. Big Twin, except V-Rod & 06 Dyna™

18-6342007-2013 Big Twin models & 06-up Dyna™

> High fl ow smooth styled chrome gas valves> Three different outlets available> Positive lever action> Economically priced

NESS GAS VALVES

07-030Vertical outlet petcock

07-032Forward outlet petcock

07-031Rear outlet petcock

90 FUEL ACCESSORIES

18-655 Big Shot 2 adjustable fuel tuner

18-600 Big Shot adjustable fuel tuner

18-634 Cheap Shot adjustable fuel tuner

07-030 Vertical, (07-031) Rear outlet, (07-032) Forward outlet

$319.95$319.95$319.95$319.95$319.95$319.95

$269.95

$149.95

$149.95

$34.95

$34.95

$34.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> World class performance, quality, style and sound for your Bagger> Rinehart’s Venturi chamber baffl e creates the ultimate performance throughout the RPM range> Ness designed billet end caps add the fi nishing touch to gleaming chrome muffl er bodies> Muffl ers fi t with stock headers on 1995-2013 FLT models > Designed and built in the USA> Ness designed end caps are also sold individually to update your existing Rinehart FL 3.5” muffl ers

> Great performance, sound, style and price> 2-1/2” chrome muffl er bodies feature steel core baffl es and billet aluminum end caps> Muffl ers are direct bolt on to stock mounts> Sold in pairs > Made in the USA

NESS/RINEHART 3-1/2” MUFFLERS & TIPS

NESS 2-1/2” SHOOTER SLIP-ON MUFFLERS

05-932Chrome muffl ers w/ chrome end caps (pair)

05-931Ness black end cap, each


05-9822007-2013 FXST Softail™ models

05-933Chrome muffl ers w/ black end caps (pair)

05-930Ness chrome end cap, each

05-9811995-2013 FXD Dyna™ models

05-9842007-2013 FLSTN models

05-9832007-2013 FLSTF models

MUFFLER KITS

MUFFLER TIPS

SHOOTER MUFFLERS

05-980 Shooter Mufflers installed

05-980 Shooter Mufflers un-installed

05-932/33 3-1/2” Ness / Rinehart muffler tips

05-933 Mufflers w/ black tips

91MUFFLER & EXHAUST

$649.95

$124.95

$299.95

$299.95

$649.95

$124.95

$299.95

$299.95

$299.95

MOTORS / EXHAUSTMOTORS / EXHAUST

> Enables you to constantly monitor your oil pressure to ensure maximum performance and long lasting reliability> Features stainless housing and glass lens, fi lled with vibration dampening glycerin for lasting performance> Billet bracket mounts oil pressure gauge to the rear rocker box> Radius & grooved fi nished in chrome, Deep Cut in black.> Complete kit includes: Ness 0-60# gauge, billet bracket/ cone, stainless steel hose assembly and necessary hardware

OIL PRESSURE GAUGE KITS

COMPLETE KIT

ACCESSORIES

15-658 Radius Chrome, 1999-up Twin Cam

15-659 Radius Chrome, 1993-up Sportster™

15-646 Replacement hose, Sportster™

15-650 Grooved, 1984-1999 Big Twin

15-653 Repl. hose, 84-99 Big Twin / S&S EVO

15-668 Deep Cut Black, 1999-up Twin Cam

15-675 Radius Black, 1999-up Twin Cam

15-670 Deep Cut Black, 1984-1999 Evolution engine

15-676 Radius Black, 1984-1999 Evolution

15-657 Radius Chrome, 1984-1999 Big Twin

15-649 Replacement hose, Twin Cam

15-666 Radius Chrome, S&S Evolution engine

15-655 Replacement 1-1/2” gauge

15-665 Replacement Deep Cut gauge

15-667 Deep Cut Black, 1993-up Sportster™

15-677 Radius Black, 1993-up Sportster™

15-668 Deep Cut Oil Pressure guage kit for 1999-up Twin Cam installed

92 OIL PRESSURE GAUGE KITS

15-668 Deep Cut black for 1999-up Twin Cam 15-675 Radius black for 1999-up Twin Cam

15-677 Radius black for 1993-up Sportster™ 15-658 Radius chrome for 1999-up Twin Cam

$199.95

$199.95

$37.95

$154.95

$39.95

$199.95

$169.95

$199.95

$169.95

$179.95

$35.95

$199.95

$39.95

$39.95

$199.95

$169.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Arlen Ness combines clean sculpted billet styling with high tech fi lter technology used in Formula 1, Nascar, and the aerospace industry > Oil fi lter element is made from laser cut 304 stainless steel medical grade micronic cloth> Catches items down to 35 microns, which is about three times better than most premium traditional oil fi lters > Filters maintain consistent fl ow under all conditions including extreme heat, presence of water, and cold startups. Where as most traditional paper fi lters can fl ow so poorly that they often cause the bypass valve to open and allow unfi ltered oil into your engine > Simple fi lter cleaning and service> Available in Beveled and Deep Cut styles> Choose from chrome or black anodize fi nish

RE-USABLE BILLET OIL FILTERS

COMPLETE KIT

COMPLETE KIT





03-465 Replacement spring & oil ring set

BILLET OIL FILTERS

NEW 03-463 Beveled black shown as a complete kit

93

03-460 Deep Cut chrome

03-462 Beveled chrome

03-461 Deep Cut black

03-463 Beveled black

Deep Cut black

Beveled blackBeveled black

Deep Cut chrome

Beveled chromeBeveled chrome

$149.95

$149.95

$4.95

$149.95

$149.95

94 COVERS

COVERS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

95

COVERS: DEBRY COVERS / POINT COVERS / DASH ACCESSORIES / GAS CAPS / COIL COVERS / HORN COVERS / M/C COVERS / LATCH COVERS

03-486 Beveled, black for Sportster™


96 DERBY & POINT COVERS

COVERS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> Derby covers are CNC machined from billet aluminum > Each style has matching point covers and many other accessories available > Available in chrome or black anodize � nish> Each cover includes chrome hardware

DERBY COVERS FOR TWIN-CAM MODELS

1999-UP TWIN-CAM (5-HOLE)





03-583 Scalloped, black







BEVELED black

BEVELED black, Sportster™

SLOT TRACK black

DEEP CUT black

ENGRAVED black

HOLESHOT black

BEVELED chrome

BEVELED chrome, Sportster™

SLOT TRACK chrome

DEEP CUT chrome

ENGRAVED chrome

SCALLOPED black

RETRO chrome

black

97

BEVELED BEVELED black, Sportster™ BEVELED BEVELED BEVELED BEVELED black, Sportster™

> Derby covers are CNC machined from billet aluminum > Each style has matching point covers and many other

BEVELED BEVELED black

SLOT TRACK SLOT TRACK black SLOT TRACK SLOT TRACK chromechromeSLOT TRACK

BEVELED BEVELED chrome

SLOT TRACK SLOT TRACK chromechromeSLOT TRACK

chromeBEVELED BEVELED black

SLOT TRACK SLOT TRACK black

chrome, Sportster™

> Unique designs available for all 1999-up Twin Cam> CNC machined billet aluminum parts are beautifully chrome plated or black anodized> Each cover includes chrome hardware

POINT COVERS FOR TWIN-CAM MODELS

DERBY AND POINT COVERS FOR SPORTSTER™

1999-UP TWIN-CAM (5-HOLE)

2004-UP DERBY (6-HOLE)

1990-UP POINT (2-HOLE)




03-584 Scalloped, black












NEW

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$149.95

$119.95

$129.95

$129.95

$129.95

$89.95

$89.95

$89.95

$149.95

$69.95

$89.95

$89.95

$99.95

$59.95

$89.95

$129.95

$89.95

$79.95

$89.95

$79.95

04-161 Beveled fuel door, black w/ (04-165) Beveled dash insert, black

04-166 Beveled chrome ignition switch cover

98 DASH & FUEL DOOR

COVERS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

04-166 Beveled, chrome ignition switch

03-422 Slot Track, chrome ignition switch

04-148 Slot Track, chrome fuel door

04-167 Beveled, black ignition switch

03-423 Slot Track, black ignition switch

04-149 Slot Track, black fuel door

04-162 Beveled, chrome dash insert

04-160 Beveled, chrome fuel door

04-165 Beveled, black dash insert

04-161 Beveled, black fuel door

NESS DASH ACCESSORIES & FUEL DOORS

2007-2013 FLT

2008-2013 FLHX2008-2013 FLHT, FLHTC, 08-09 FLTR (not shown)1989-2007 FLHS, FLTR, FLT, FLTHC, FLTC

1992-2007 FLT, FLHT2008-2013 FLTR, FLHT, FLHX

> Billet dash inserts � t nicely into factory dash covers> Billet fuel doors replace the factory casted units> Several styles to choose from in chrome or black anodized � nishes

04-166

04-16404-14104-162

04-15804-160

04-167

04-16504-14304-163

04-15904-161

03-423

04-14604-15504-116

04-15704-149

03-422

04-14404-15404-115

04-15604-148

SLOT TRACK, chromeIGNITION SWITCH COVER

DASH INSERT

FUEL DOOR

SLOT TRACK, black BEVELED, chrome BEVELED, black

99

NEW

04-167 04-167 Beveled, black ignition switch

04-165 04-165 Beveled, black dash insert

04-161 04-161 Beveled, black fuel door

$99.95

$99.95$129.95$129.95

$149.95$149.95









100 GAS CAPS

NESS GAS CAPS

1997-2013 Vented1997-2013 Non-Vented1982-1996 Vented1982-1996 Non-Vented

w/ LED Gauge

> Arlen Ness was one of the � rst billet gas cap manufacturers in the industry, for 2013 we present you with two new CNC sculpted billet styles > Exclusive ratchet design provides proper torque and design alignment > Available in vented, non-vented, and dummy w/ LED fuel gauge applications > Dummy and LED fuel light caps � t tanks originally equipped with fuel gauges > LED caps are user-programmable to light LED at any pre-set fuel level to help ensure you don’t run out of gas > All gas caps sold individually

70-00070-01070-10070-110

70-300

70-00470-01470-10470-114

70-304

70-00170-01170-10170-111

70-301

70-00570-01570-10570-115

70-305

APPLICATION

w/ LED GAUGE

SLOT TRACK, BLACKSLOT TRACK, CHROME BEVELED, CHROME BEVELED, BLACK

NESS GAS CAPS> Arlen Ness was one of the � rst billet gas cap manufacturers in the industry, for 2013 we present you with two new CNC sculpted billet styles > Exclusive ratchet design provides proper torque and design alignment


> Arlen Ness was one of the � rst billet gas cap manufacturers in the industry, for 2013 we present you with two new CNC sculpted billet styles

70-000 70-000 Beveled, black


NEW

70-004 70-004 Slot Track, black

70-304 70-304 Slot Track, black

70-015 70-015 Slot Track, chrome

70-305 70-305 Slot Track, chrome


Beveled, chrome 70-305 70-305 Slot Track, chrome

Beveled, black

Beveled, black


70-300 70-300 Beveled, blackBeveled, black 70-301 70-300 70-300 Beveled, black

COVERS

70-000 Beveled, black 70-001 Beveled, chrome

$89.95$89.95$89.95$89.95

$169.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

> These round horn covers accept any 5 hole point cover to match the theme of your bike. Choose Ness (pg.101), HD® or your favorite aftermarket design> Steel construction cover is � nished in chrome or black powder coated � nish> Replaces the factory “cowbell” shaped horn cover on 1991- 2013 Big Twin and XL models

> Add style and protect your coil from the elements> CNC machined from 6061-T6 billet aluminum > Features Deep Cut styling> Offered in chrome or black anodize � nish > Designed to � t: 2006-2013 Dyna models, and 2000-2013 Softail models

ARLEN NESS HORN COVERS

ARLEN NESS COIL COVERS

03-590Ness horn cover, chrome

04-300Ness horn cover, chrome

03-591Ness horn cover, black

04-301Ness horn cover, black

NOTE: Point cover sold separately

03-590 Horn Cover shown w/ Engraved point cover 03-597

03-590 Chrome horn cover w/o point cover

04-300 Deep Cut chrome / 04-301 black

03-591 Black horn cover w/o point cover

101HORN & COIL COVERS

NEW

$89.95

$89.95

$49.95

$49.95

> Provides a clean transition between fairing and windshield > Machined from billet aluminum in the U.S.A > Available in 3 styles: Deep Cut, Beveled, and Slot Track > Choose from chrome or black anodize finish > Windshield trim installs easily in minutes and each trim kit includes chrome mounting hardware

WINDSHIELD TRIM

STYLE

Deep Cut, chrome 03-691

03-690

03-695

03-694

03-692

03-693

Beveled, chrome

Slot Track, black

Deep Cut, black

Beveled, black

Slot Track, chrome







102 WINDSHIELD TRIM

NEW

03-692 Slot Track, black and Beveled, black (03-694)

COVERS

$149.95

$149.95

$149.95

$149.95

$149.95

$149.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

WINDSHIELD TRIM

> Cut from 6061-T6 billet aluminum> Add some needed style to the look of your inner fairing> Designed to � t FLT models with bat wing style fairings > Sold in pairs

DEEP CUT SPEAKER GRILLS

03-900Speaker grills, pair, chrome

03-901Speaker grills, pair, black


03-900 Deep Cut chrome Speaker Grill 03-901 Deep Cut black Speaker Grill

03-650 Deep Cut chrome frame grill, chrome 03-653 Deep Cut black frame grill, black

103SPEAKER & FRAME GRILLS

> Machined from billet aluminum in the USA > Adds style and takes eyes away from the un� nished looking areas of stock frame> Many matching Deep Cut styled accessories available such as: � oorboards, grips, latch covers, and more > Available in chrome or black anodize � nish > Bolt-on installation, mounts to front frame downtubes






FRAME GRILL

NEW

$139.95

$139.95

$169.95

$169.95

$169.95

$169.95

104 MASTER CYLINDER COVERS

COVERS



FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

NESS MASTER CYLINDER COVERS

2008-2013 FLT & 2006-2013 V-Rod, front05-07 FLT & 2006-2013 Dyna™/Softail™, front2005-2007 FLT & 2006-2013 Softail™, rear2008-2013 FLT, rear2007-2013 XL Sportster™, front2007-2013 XL Sportster™, rear

> Available for most popular front and rear applications> Includes chrome hardware> Made in the USA

03-41203-41303-41403-415

----------

03-40403-40503-40603-40703-47003-475

03-40803-40903-41003-41103-47103-476

03-45403-45203-45603-458

----------

03-44903-44803-45003-451

----------

03-41603-41703-41803-419

----------

03-44303-44103-44603-447

----------

03-45503-45303-45703-459

----------

03-44203-44003-44403-445

----------

ENGRAVED, CHROMEAPPLICATION

ENGRAVED, BLACK

DEEP CUT, CHROME

DEEP CUT, BLACK

RETRO, CHROME

SLOT TRACK, BLACK

SLOT TRACK,CHROME

BEVELED,CHROME

BEVELED,BLACK

105









03-447 Engraved, blackRetro, chrome

$59.95$59.95$59.95$59.95$69.95$89.95

$49.95$49.95$49.95$49.95$49.95$49.95

106 SADDLEBAG LATCH COVERS

COVERS> Machined from billet aluminum> Latch covers are designed for Dresser models 1993-up and retain full function of the stock latches> Available in chrome plated or black anodized � nish> Each style has many matching accessories to enhance every angle of your bagger > Sold in pairs

NESS SADDLEBAG LATCH COVERS

CHROME BLACK

03-559

03-529

03-569

03-550

03-555

03-581

03-554

-----

03-551

03-556

Deep Cut

Beveled

Engraved

Retro

Slot Track










$189.95

$169.95

$169.95

$189.95

$169.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

107

NESS SADDLEBAG LATCH COVERS

BLACK

03-550 Beveled, chrome installed

03-554 Deep Cut, black installed

LIGHTS / ELECTRONICS

108 LIGHTS & ELECTRONICS

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

109

LIGHTS & ELECTRONICS: HEADLIGHTS / FIRE RING ACCESSORIES / TURN SIGNALS / LOAD EQUALIZERS / TAILLIGHTS / LICENSE PLATES


110 HEADLIGHTS

> These forged aluminum headlights will fi t on most bottom mount applications> Available in bullet or stretched bullet designs> Bullet design is 6-3/4” long and Stretched bullet is 9-1/4” long> Some styles available with unique Deep Cut grill> Most designs available in chrome or black anodized> All headlight assemblies include a halogen H4 sealed beam> Optional extended headlight mount (08-362) is available separately when additional clearance is needed for your application

NESS 5-3/4” BILLET HEADLIGHTS

08-336Bullet headlight w/ Deep Cut grill, chrome

08-339Stretched Bullet w/ visor, chrome

08-326Stretched Bullet w/ Deep Cut grill, chrome

08-337Bullet headlight w/ Deep Cut grill, black

08-345Stretched Bullet w/o visor, chrome

08-327Stretched Bullet w/ Deep Cut grill, black

08-326 5-3/4” Stretch Bullet w/ Deep Cut Grill installed

08-336 5-3/4” Bullet w/ DC Grill

08-345 5-3/4” Stretched Bullet

08-337 5-3/4” Blk Bullet w/ DC Grill

08-326 5-3/4” Stretched Bullet w/ Deep Cut Grill

08-327 5-3/4” Stretched Black Bullet w/ Deep Cut Grill

08-339 5-3/4” Stretched Bullet w/ visor

08-336

08-345 5-3/4” Stretched Bullet 5-3/4” Stretched Bullet


08-339 5-3/4” Stretched Bullet w/ visor 5-3/4” Stretched Bullet w/ visor 08-339

08-326 5-3/4” Stretched Bullet w/ Deep Cut Grill 5-3/4” Stretched Bullet w/ Deep Cut Grill 08-326 5-3/4” Stretched Bullet w/ Deep Cut Grill 5-3/4” Stretched Bullet w/ Deep Cut Grill

08-326Stretched Bullet w/ Deep Cut grill, chrome

08-337 5-3/4” Blk Bullet w/ DC Grill 5-3/4” Blk Bullet w/ DC Grill

08-336 5-3/4” Bullet w/ DC Grill 5-3/4” Bullet w/ DC Grill

$299.95

$299.95

$349.95

$299.95

$259.95

$349.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

111HEADLIGHT ACCESSORIES

> Deep Cut headlight grills add a clean and different look to your stock headlight> Mounts to your factory headlight ring or to our billet LED rings> Grill can be mounted vertical or horizontal to achieve your desired appearance> Machined from 6061-T6 billet aluminum and chrome plated or black anodized> Designed to fi t FLHX, FLHR and FLHT models

NESS DEEP CUT HEADLIGHT GRILL

08-400Deep Cut Grill, chrome

08-401Deep Cut Grill, black

> Moves headlight forward by approximately 2-1/4”> Designed to work on bottom triple tree applications> Will not work on Ness-Tech® triple trees


NESS 2-1/4” EXTENDED HEADLIGHT BLOCK

08-362Extended headlight block

08-400 Chrome and 08-401 black

08-400 Deep Cut grill, chrome installed

08-362 Extended headlight block

$99.95

$99.95

$34.95


112 FIRE RING ACCESSORIES

12-759 Amber LED w/ White trim LED 12-746 Red LED w/ Red trim LED

08-404 Chrome Fire Ring bezel with white LED running lights

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

113

> Add style and safety to your factory headlight assembly> Innovative billet headlight rings are available with two different LED confi gurations. One design features super bright daytime running lights that are found in many of today’s luxury cars. We also offer a clean turn signal version featuring super bright amber LED’s with left and right sides fl ashing independently> Billet aluminum headlight rings are available in chrome or black anodized > Simple installation taps into your factory wiring harness

FIRE-RING LED BEZEL FOR 7” FACTORY HEADLIGHTS

CHROME RING

BLACK RING

08-404White LED runnning lights, 1983-up FLHT/FLHX/FLHR

08-405White LED runnning lights, 1983-up FLHT/FLHX/FLHR

08-408White LED runnning lights, 1993-up FLST Softail™

08-409White LED runnning lights, 1993-up FLST Softail™

08-406Amber LED turn signals, 1983-up FLHT/FLHX/FLHR

08-407Amber LED turn signals, 1983-up FLHT/FLHX/FLHR

08-410Amber LED turn signals, 1993-up FLST Softail™

08-411Amber LED turn signals, 1993-up FLST Softail™

> The fi nest upgrade you can make to your factory turn signals> Available in dual fi lament or single fi lament applications> Our dual function LED design features a billet aluminum ring that is integrated into the lens. Each billet ring includes 7 exposed white, amber or red LED’s to work as running lights. Behind the lens features a cluster of LED’s for turn signal and or brake light functions. These fi t all front and rear applications with a light socket for an 1157 type bulb > Our single fi lament design has the Fire Ring LED’s and the cluster of LED’s behind the lens light as one. These are for rear turn signal applications with a light socket for an 1156 type bulb. > Simple plug and play installation> Sold in pairs

FIRE RING LED KITS FOR FACTORY TURN SIGNALS

LENS TRIM RING TRIM LED FILAMENT

NOTE: For OEM functionality all front applications require dual fi lament kits and rear applications require single fi lament kits except 07-13 XL1200N & 09-13 XL883N models which require dual fi lament kits.

12-75612-75712-75812-75912-75412-75512-74512-746

AmberAmberAmberAmberRedRedRedRed

ChromeChromeBlackBlack

ChromeBlack

ChromeBlack

Amber WhiteAmberWhiteRedRedRedRed

DualDualDualDualDualDual

SingleSingle

NOTE: Most multiple LED installations will require a load equalizer to insure proper fl ash rates and function of HD® security systems. found on pg. 117

08-406 Chrome Ring w/ amber turn signal LED for 1983-up FLHT/FLHX/FLHR installed

08-409 Black Ring w/ white running light LED for 1993-up Softail™ installed

LED Chrome and black Fire Ring LED kits

12-755 Black Fire Ring w/ Red LED installed

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$199.95

$119.95$119.95$119.95$119.95$119.95$119.95$119.95$119.95


114 DIRECT BOLT-ON TURN SIGNALS

> These are some of the cleanest and brightest direct bolt-on turn signals you will ever fi nd for your ride. No spacers or adapters necessary> Our compact billet design fl ow nicely into your forks or fender strut to make them almost invisible. These lights contain two Power LED’s that are equivalent to nearly 25-30 traditional LED’s. The light produced from the Power LED’s is incredible.> These lights are sold in pairs in chrome or black anodized for the following models:

NESS DIRECT BOLT-ON TURN SIGNALS w/ POWER LED

FRONT

REAR

12-7602006-2013 FLHX & 2004-2013 FLT, chrome w/ Amber LED

12-7402000-up FXD/XL/FXST, chrome w/ Red LED

12-7442000-up FXD/XL/FXST, black w/ Amber LED

12-7432000-up FXD/XL/FXST, chrome w/ Amber LED

12-7612006-2013 FLHX & 2004-2013 FLT, black w/ Amber LED

12-7412000-up FXD/XL/FXST, black w/ Red LED

12-760 Front Power LED, chrome w/ Amber LED

12-740 Rear Power LED, chrome w/ Red LED

12-760 Front Power LED, chrome

12-740 Rear Power LED, chrome

12-741 Rear Power LED, black

12-761 Front Power LED, black 12-761 Front Power LED, black Front Power LED, black

12-760 Front Power LED, chrome Front Power LED, chrome

$149.95

$149.95

$149.95

$149.95

$149.95

$149.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

115TURN SIGNALS

NESS DIRECT BOLT-ON TURN SIGNALS w/ POWER LED

> Smooth 2” style coned design> Available in LED or standard bulb confi gurations> Each light includes a red and amber lens> Beautifully chrome plated or black anodized fi nish> Sold individually> Standard bulb available in single or dual fi lament

2” SPEEDING BULLET MARKER LIGHTS

STANDARD KIT

LED KIT

ACCESSORIES

12-701Smooth chrome bullet w/ dual fi lament bulb

12-731Smooth chrome bullet w/ Red LED

12-711 Replacement Red lens, each

12-708 Replacement Bullet ring, each

12-734Smooth black bullet w/ Red LED

12-713 Replacement bulb, 12v3w, each

12-739 Replacement Red LED board, each

12-700Smooth chrome bullet w/ single fi lament

12-730Smooth chrome bullet w/ Amber LED

12-710 Replacement bulb, 12v23w, each

12-714 Replacement mounting stud, each

12-733Smooth black bullet w/ Amber LED

12-712 Replacement Amber lens, each

12-732 Replacement Amber LED board, each

> Defi nitely the fi nest factory style turn signal on the market> Deep Cut styled billet housings in chrome or black anodized> Super bright “Fire Ring” LED lens kit adds the fi nishing touch> Sold individually

DEEP CUT OEM STYLE TURN SIGNALS w/ FIRE RING LED’s

LENS TRIM RING TRIM LED FILAMENT

AmberAmberAmberAmberRedRedRedRed

AmberAmberAmberAmber

ChromeChromeBlackBlack

ChromeBlack

ChromeBlack

ChromeBlack

ChromeBlack

Amber WhiteAmberWhiteRedRedRedRed

AmberAmberWhiteWhite

DualDualDualDualDualDual

SingleSingleDualDualDualDual

NOTE: For OEM functionality all front applications require dual fi lament kits and rear applications require single fi lament kits except 07-13 XL1200N & 09-13 XL883N models which require dual fi lament kits.

NOTE: Most multiple LED installations will require a load equal-izer to insure proper fl ash rates and function of HD® security systems. found on pg. 117

* Front fi tment for FLTR/FLHX only.

12-75212-76412-75312-76512-75012-75112-74812-74912-766*12-767*12-768*12-769*

12-750 Deep Cut OEM style, chrome

12-751 Deep Cut OEM style, black

12-731 Chrome 2” Bullet w/ Red LED & 12-730 Chrome Bullet w/ Amber LED

12-733 Black 2” Bullet w/ Amber LED & 12-734 Black Bullet w/ Red LED

Deep Cut OEM style, chrome Deep Cut OEM style, chrome

12-731 Chrome 2” Bullet w/ Red LED & 12-730 Chrome Bullet w/ Amber LED Chrome 2” Bullet w/ Red LED & 12-730 Chrome Bullet w/ Amber LED

12-751 Deep Cut OEM style, black Deep Cut OEM style, black

Chrome 2” Bullet w/ Red LED & 12-730 Chrome Bullet w/ Amber LED

12-733 Black 2” Bullet w/ Amber LED & 12-734 Black Bullet w/ Red LED Black 2” Bullet w/ Amber LED & 12-734 Black Bullet w/ Red LED

$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95

$34.95

$49.95

$3.95

$8.95

$49.95

$2.95

$19.95

$34.95

$49.95

$2.95

$3.49

$49.95

$3.95

$19.95


116 XENOLEN TURN SIGNALS

XENOLEN TURN SIGNALSXenolen indicator lights distributed by Arlen Ness feature cutting edge LED technology. These high power LED’s are extremely bright and voltage effi cient, outperforming leading competitors. Their small size, design, and incredible performance add safety and style to your motorcycle.> Extreme detail and technology goes into each unique design> CNC sculpted billet aluminum housings (except Infernal design)> Super bright LED confi gurations that out perform leading competitors> Universal applications fi t HD®’s, Cruisers or sport bikes> Indicators include 8mm stud which will fi t in any 5/16” application (standard HD® & Cruiser)> Available in chrome, black and gold anodized fi nishes> Available in 5 different styles, sold in pairs

INFERNAL XENOLEN TURN SIGNALS

12-772 Infernal w/ Amber LED

12-773 Infernal w/ Amber LED

12-776 Infernal w/ Red LED

12-777 Infernal w/ Red LED

CHROME

BLACK

ARCHFIEND XENOLEN TURN SIGNALS

12-770 Archfiend w/ Amber LED

12-771 Archfiend w/ Amber LED

12-774 Archfiend w/ Red LED


CHROME

BLACK

COBRA XENOLEN TURN SIGNALS

GUARDIAN XENOLEN TURN SIGNALS

12-793 Cobra w/ Amber LED

12-790 Guardian w/ Amber LED

12-794 Cobra w/ Amber LED

12-791 Guardian w/ Amber LED

12-795 Cobra w/ Red LED

12-792 Guardian w/ Red LED

CHROME

CHROME

BLACK

BLACK

GOLD

GOLD

OTHELLO XENOLEN TURN SIGNALS

12-796 Othello w/ Amber LED


12-798 Othello w/ Red LED

CHROME

BLACK

GOLD

> Length: 90mm > Die-Casting/CNC Machined Housing> Available in Red or Amber> 20 High Power LEDS, 12V 2.1W

> Length: 74mm > Die-Casting/CNC Machined Housing > Available in Red or Amber > Power LED x2, 12V 3.1W

> Length: 78mm > CNC Machined Housing> Available in Red or Amber> 23 High Power Amber LEDS, 12V 1.5W

> Length: 108mm > CNC Machined Housing > Available in Red or Amber> 20 High Power Amber LEDS, 12V 1.5W

> Length: 65mm > CNC Machined Housing> Available in Red or Amber> 21 High Power Amber LEDS, 12V 2.5W

> Die-Casting/CNC Machined Housing > Available in Red or Amber > Power LED x2, 12V 3.1W

XENOLEN TURN SIGNALSXenolen indicator lights distributed by Arlen Ness feature cutting edge LED technology. These high power LED’s are extremely bright and voltage effi cient, outperforming leading competitors. Their small size, design, and incredible performance add safety and style to your motorcycle.

> CNC sculpted billet aluminum housings (except Infernal design)> Super bright LED confi gurations that out perform leading competitors> Universal applications fi t HD®’s, Cruisers or sport bikes> Indicators include 8mm stud which will fi t in any 5/16” application (standard HD® & Cruiser)

> 20 High Power LEDS, 12V 2.1W

> 21 High Power Amber LEDS, 12V 2.5W


BLACK

GOLD

GUARDIAN XENOLEN TURN SIGNALS

12-798 Othello w/ 12-798

> 20 High Power Amber LEDS, 12V 1.5W> 20 High Power Amber LEDS, 12V 1.5W> 20 High Power Amber LEDS, 12V 1.5W


12-790 Guardian w/

12-791 Guardian w/

12-792 Guardian w/

CHROME

BLACK

GOLD

CHROME


> 23 High Power Amber LEDS, 12V 1.5W

INFERNAL

ARCHFIEND

OTHELLO

GUARDIAN

COBRA

INFERNAL XENOLEN TURN SIGNALS

12-772

CHROME

12-771


12-775

BLACK

OTHELLO XENOLEN TURN SIGNALS

CHROME

12-770

12-774


12-793 Cobra w/

CHROME

BLACK


CHROME

12-794 Cobra w/

12-795

GOLD

$119.95

$119.95

$119.95

$119.95

$179.95

$179.95

$179.95

$179.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

$129.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

117SIGNAL ACCESSORIES

> These load equalizers are a must when using custom turn signals such as LED types that draw less current> Eliminates erratic blinking or turn signals> For use with models with self-canceling turn signals

LOAD EQUALIZER

12-285 Load Equalizer II, splice-in, 1991-1999 HD®

12-286 Plug-in, 96-13 FXST; 97-13 FLHT, FLHR, FLHX’ 97-13 Dyna

12-287 Load Equalizer III, plug-in, 04-13 XL Sportster™

> The perfect solution for relocating your turn signals off of your handlebars Dyna™, FXR and Sportster™ models> Billet aluminum mounts bring your turn signals in close to your factory trees for a clean look. No unsightly clamps. Direct bolt-on to your triple tree pinch bolts> Turn signal mounts can be mounted to upper or lower triple tree

TURN SIGNAL MOUNTS FOR 39mm & 49mm FORKS

CHROME

BLACK

12-737 87-up XL; pre-06 Dyna™ 87-96 FXR™ w/ 39mm forks

12-738 87-up XL; pre-06 Dyna™ 87-96 FXR™ w/ 39mm forks

12-735 2006-up Dyna™ & Softail Rocker™ w/ 49mm forks

12-736 2006-up Dyna™ & Softail Rocker™ w/ 49mm forks

> These chrome plated license plate assemblies feature a fl ush mounted LED taillight with integrated turn signals (5-1/2” H x 7” W)> Taillight/turn signals can be plugged into OEM wiring harness or spliced into a custom application> Several fl ush mount pockets are available

NESS/RWD TURN SIGNAL /TAILLIGHT LICENSE PLATE

TAILLIGHT/TURN SIGNAL/LICENSE ASSEMBLY

MOUNTING POCKET

12-560RWD Die-cast assembly

20-530Cat-eye taillight w/ weld in pocket

20-533Universal mount w/ bolt on pocket

20-539Flush mount / bolt on pocket for 2008-2012 FLT

12-520Ness Radius billet assembly, chrome

12-524Ness Radius billet assembly, black

12-561Flush mount weld in pocket

20-532Flush mount w/ bolt on pocket

12-737 Signal mounts for 39mm forks installed 12-735 Signal mounts for 49mm forks

12-285 Load Equalizer Load Equalizer

Signal mounts for 49mm forks

12-520 Ness Radius Billet Assembly 12-560 RWD Die-Cast Assembly

12-520 Ness Radius installed

SHOWN in order: 20-530, 12-561, 20-533, 20-532

$26.95

$69.95

$69.95

$276.95

$167.95

$78.95

$92.95

$299.95

$299.95

$79.95

$78.95

$39.95

$39.95

$39.95

$39.95


118 TAILLIGHT / LICENSE KITS

> Designed for those who want to improve and change of the look of your late model FLT rear end without replacing the rear fender> These taillight/license plate assemblies feature a LED taillight with integrated turn signals for a clean custom look > Plugs into OEM wiring harness and bolts to stock mounting points for simple installation > Offered in chrome or black anodize fi nish > Available for 2009 and up FLT models

TAILLIGHT / LICENSE ASSEMBLY FOR LATE MODEL FLT

12-5222009-2013 FLHX / FLTRX, chrome

12-5232009-2013 FLHX / FLTRX, black

NEW

12-523 Taillight / license assembly for late model FLT, black

12-523 Complete kit

12-523 Taillight / license assembly for late model FLT, black 12-522 Taillight / license assembly for late model FLT, chrome

12-523 Complete kit Complete kit

12-523 Taillight / license assembly for late model FLT, black Taillight / license assembly for late model FLT, black 12-522 Taillight / license assembly for late model FLT, chrome Taillight / license assembly for late model FLT, chrome

$399.95

$399.95

FRAM

ES /

SUSP

ENSIO

NBO

DY W

ORK

WHEE

LSFO

OT CO

NTRO

LSHA

ND CO

NTRO

LSMO

TORS

/ EX

HAUS

TCO

VERS

LIGHT

S / EL

ECTR

ONICS

119LICENSE ACCESSORIES

> Stretched cateye shape gives a clean look to the rear section of your bike> Super bright L.E.D. Bulbs> Chrome plated housing> Available individually or in kit form

JET-EYE TAILLIGHT & TURN SIGNAL KIT

ACCESSORIES

LED LIGHT KITS

ACCESSORIES

20-500 Jet-Eye taillight ONLY

12-271 Jet-Eye turn signal backing plate

12-272 Jet-Eye taillight, turn signals & backing plate

12-398 Jet-Eye taillight replacement LED board

12-270 Jet-Eye turn signals ONLY, pair

12-399 Jet-Eye turn signal replacement LED board, pair

NESS LICENSE PLATE FRAMES

12-189 Replacement LED kit

> Billet aluminum construction measures 7.25” x 4.25” to fi t most states> Blind hole mounting for a clean look> Available in chrome or black anodized fi nish> Made in the USA

LICENSE FRAMES

12-149

12-148

12-141

12-142

12-154

12-159

12-153

12-155

Smooth, chrome

Smooth, black

Engraved, chrome

Engraved, black

Deep Cut, chrome

Deep Cut, black

Retro, chrome

LED License plate frame

Billet aluminum construction measures 7.25” x 4.25” to fi t most states MOTO

RS /

EXHA

UST

COVE

RS

12-272 Jet-Eye taillight,turn signals & backing plate kit

12-149 Smooth, chrome




12-148 Smooth, black



12-155 Radius LED license plate

$129.95

$34.95

$224.95

$77.95

$69.95

$33.95

$69.95

$69.95

$79.95

$79.95

$79.95

$79.95

$79.95

$79.95

$19.95


120

> DEALERS: We sell only to motorcycle businesses (licensed, established, commercial places of business serving the general public in the areas of motorcycle sales, service and/or parts and accessories). We reserve the right to refuse to sell to any account not meeting our requirements.

> DEALER PRICING ADVERTISING AGREEMENT: Any dealer, distributor or retailer of any Arlen Ness product (s) agrees that in no instance may the Arlen Ness logo, name, similar mark or any material subject to copyright protection, be used in or be associated with any advertisement that mentions, suggests or in some form is linked to a price below the suggested retail price published by Arlen Ness Enterprises, Inc. Failure to comply with this policy will result in Arlen Ness Enterprises, Inc. terminating the agreement between Arlen Ness and the party involved.

> INTERNATIONAL ORDERS: International orders will be directed to our Network of Distributors located around the globe. Our Distributor will then recommend an agent in your area. If there is not an agent in your area, you may order from us directly.

> BACK ORDERS: Every effort is made to keep all items in stock at all times. But occasionally certain products may be back ordered. Arlen Ness Enterprises will call when the item becomes in stock to confirm it is still required before shipping

> PRICING: We reserve the right to change: prices, policies or terms at any time without notice. > TERMS: Retail order will only be taken if paid for by credit card. Dealers will pay for orders by their agreed terms on dealer application. > FREIGHT: All retail shipments will be sent out by the most economical method, faster methods available upon request.

> RETURNED CHECKS AND REFUSED SHIPMENTS: All returned checks and refused shipments will result in a $25.00 processing charge.

> MERCHANDISE RETURNS: A return goods authorization (RGA) is required for all items. Call to request an RGA number. No freight or restocking fee will be charged on returned goods found to be defective or not as ordered. Returns for any other reason will be charged a 20% restocking fee. All returns must be shipped back with all components of the original part included; failure to do so will result in the part being shipped back to the customer at the customer’s expense. All sales are final on discontinued and closeout items. All returns are subject to inspection for determination of credit. Mark RGA the number prominently on the outside of package and send freight prepaid to: Arlen Ness Enterprises | 6050 Dublin Blvd. | Dublin, CA 94568

Any returns received without the correct RGA will be returned to the customer at their expense. All retail returns will either receive a replacement item or a company credit.

> CATALOG REQUESTS: We believe the contents and specifications of this catalog are correct. We assume no liability for any errors in listings, specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, product quality, pricing and application at any time without further notice and without further obligation. The reproduction of any material from this catalog is forbidden without our written approval.

> IMPORTANT: Arlen Ness Enterprises, Inc. is in no way, shape or form connected with Harley-Davidson Motor Company. Any products with a trademark, name, word, O.E.M. number used in the catalog by Arlen Ness Enterprises is strictly intended to be used solely as a reference only to usage to that particular part. None of the parts and accessories are D.O.T. approved. All of our parts are for custom appli-cations. While we have total confidence in our product, we strongly suggest test fitting all parts prior to any modifications or painting. Arlen Ness Enterprises will not be held responsible for any paint or labor cost under any circumstances and will not accept for return any part that has been modified or damaged due to improper installation.

> LIMITED WARRANTY:

> Improper Care or Misuse:Arlen Ness Enterprises shall have no warranty obligation in the event the goods have been modified by any other person or organization, or where the goods become defective in whole or in part as a result of improper installation, improper maintenance, improper use, abnormal operation or any other misuse or mistreatment of the goods.

> Proof of Purchase:Arlen Ness Enterprises shall have no warranty obligation in the event the customer is unable to present a receipt evidencing the date on which the customer purchased the goods.

> Exhausts:Exhaust systems are warrantied for manufacturing defects only. However, there is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, exhaust timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing.

> Chrome Plating:If, after initial inspection a flaw is discovered in the chrome, do not install. Please call Arlen Ness Enterprises for an RGA. We will replace these items at no charge. If chrome fails after installation during our 1-year warranty period, items will be re-chromed at our expense and then returned. Please use caution when installing chrome plated items, as the finish is fragile. Always use anti-seize when using chrome hardware on chrome plated products. Arlen Ness recommends using a quality wax or polish on chrome pieces to protect their finish.

> Engine Warranty:All engines purchased from Arlen Ness Enterprises, Inc. will be warranted per the manufacturer warranty. If in the event that an engine has been assembled by Arlen Ness, they will have a warranty period of six months. Chrome parts will still carry our 1-year limited warranty.

> Consequential Damages:Arlen Ness Enterprises shall not be liable for any consequential or incidental damages arising from the breach of any warranties, the failure to deliver, delay in delivery, delivery in non-conforming condition, or for any other breach of contract or duty between Arlen Ness Enterprises and the customer.

> Chrome Wheel Warranty - 1 Year Unconditional Warranty:The chrome finish on your Arlen Ness wheel is of the highest quality, but to ensure its longevity it must be maintained properly. Salt, sand and humidity are bad for chrome. If you ride the motorcycle in these conditions and do not clean and dry your chrome wheels properly, the life of the chrome will be shortened. Do not use any abrasive cleaners or waxes. Arlen Ness reserves the right to determine if the wheel has been maintained properly and has not been abused. You may return the wheel to Arlen Ness within one year of the invoice date and if upon inspection it is found to be defective, we will replace it or at our option repair it.

> Black Anodize Wheel Warranty - 1 Year Unconditional Warranty:The black anodize finish on your Arlen Ness wheel is of the highest quality, but to ensure its longevity it be maintained properly. Exposure to UV rays is bad for black anodize. Do not use any abrasive cleaners or waxes. Arlen Ness reserves the right to determine if the product has been maintained properly and has not been abused. If your Arlen Ness black anodize wheel has been maintained properly and not abused, you may return it to Arlen Ness within one year of the invoice date and if upon inspection it is found to be defective, we will replace it or at our option repair it.

www.ARLENNESS.com

> TERMS & CONDITIONS


I hope you enjoy our 2013 catalog edition. This is our 43rd year in the motorcycle business and we are proud to say that we are still family owned and operated. We are also the only family in the motorcycle world that houses three generations of passionate designers with the same last name who love creating new products for motorcycles. Throughout the years we have been able to build a great team of employees who believe in our brand and our values. We would have not been able to do it without them. If you have used our products in the past, thank you for the business. We do appreciate it. If you are new to Ar-len Ness, we welcome the opportunity to earn your business and trust. I hope you will agree that we create some of the fi nest products in the world for V-Twin motorcycles. If you are ever in the San Francisco Bay Area, please stop by to see our showroom and custom motorcycle collection in our museum. If you can’t make it to the shop, we hope to see you at the major motorcycle events throughout the world.

Ride safe,

To our loyal friends and family,

Documents

2013 Arlen Ness for Harley Davidson®