2018 PRODUCT GUIDE - Oceanic Systems (UK) LtdOceanic Systems (UK) Ltd is a world leading manufacturer of NMEA2000® based Integrated Alarm, Display and Control Systems for leisure

2018PRODUCT GUIDE

POSEIDON CAMERAS ENGINEDATA

MONITORING DC DIGITALSWITCHING

CABLING& CONNECTORS

WHO WE ARE

Oceanic Systems (UK) Ltd is a world leading manufacturer of NMEA2000® based Integrated Alarm, Display and Control Systems for leisure and commercial vessels. The brand new Poseidon system provides the most stunning graphics for any luxury or high tech bridge console.

The company’s product line includes Black Glass™ Ultra Modern Bridge System, Integrated Alarm, Display and Control monitors and sensors for all aspects of monitoring resources on board. These include fuel and water tanks, electrical system monitoring, temperature management, fuel and water transfer and engine instrumentation and Digital Switching.

The products are designed and manufactured in the United Kingdom and are sold and supported worldwide. The products are designed and proven to be rugged, robust and very reliable.

Contents

* 4 INTRODUCING POSEIDON®

* 6 POSEIDON® DISPLAYS

* 8 POSEIDON® WIRING DIAGRAM

* 10 CCTV CAMERAS

* 12 MULTIPLE ENGINE DISPLAYS

* 14 TANK MANAGEMENT

* 16 VOLUMETRIC SENDERS

* 17 SUBMERSIBLE HYDROSTATIC SENDERS

* 18 SIDE MOUNT HYDROSTATIC SENDERS

* 20 AC MONITORING

* 21 DC MONITORING

* 22 TEMPERATURE MONITORING

* 24 PRESSURE MONITORING

* 25 AIRFLOW MONITORING

* 26 DIGITAL SWITCHING

* 27 ADAPTORS

* 28 CABLES & CONNECTORS

re

NMEA2000 PLC HDMI

Alarm EthernetPLCStandard

NMEA2000®

Standard

HDMI MicroPlug

RemoteDisplays

LocalDisplays

+44 (0) 1425 610022 | www.osukl.com 2018 | 5

Poseidon® System Unit

Primary and Secondary Displays

High resolution, sunlight readable,Projected Capacitive touchscreens

10.1”, 15.6”, 19” and 21.5” for the clearest display.See whole range pg 6-7

INTRODUCING POSEIDON®

one of it s k ind sleek data visualisat ion system, with user, adjustable

screen design

5180

5010-5121

Main Features Poseidon® is designed with ease of installation in mind. With minimum cabling to speed installation and reduce weight and complexity. Poseidon® has configurable, clean and modern graphics with choice of background images, CCTV camera windows and customised floor plans, making it quick and easy to customise.Poseidon® also comes with incorporated image library which users can modify, position, resize and configure.

PART NUMBER

PART NUMBER

IP67

HD

HDMI

IP67 HDMITouchScreen

HD EthernetLocalDisplays

6 | 2018 Oceanic Systems Catalogue | Copyright Reserved +44 (0) 1425 610022 | www.osukl.com 2018 | 7

19“ Secondary display Dimensions: 424mm x 362mmResolution: 1280 x 1024 HDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch

19“ Primary display Dimensions: 424mm x 362mmResolution: 1280 x 1024 HDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch

21.5” Primary display Dimensions: 516mm x 334mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch

21.5“ Secondary display Dimensions: 516mm x 334mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch

10.1” Primary display Dimensions: 262mm x 186mmResolution: 1280 x 800 WXGABrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch

10.1“ Secondary display Dimensions: 262mm x 186mmResolution: 1280 x 800 WXGABrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch

15.6” Primary display Dimensions: 398mm x 252mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch

15.6“ Secondary display Dimensions: 398mm x 252mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch

5019 51195021 5121

5010 51105015 5115

PRIMARY Screens SECONDARY Screens

A l l Poseidon ® displays have

capacit ive touch, are sunl ight

readable and have outstanding

br ightness and contrast .

HDMI cable up to 5 metres from Poseidon® System Unit

Cat 5 Ethernet cable any distance from Poseidon®

System Unit

POSEIDON ® DISPLAYS

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

21.5”19”15.6”10.1”


Designed for a quick and easy set up, this system is functional immediately when installed.POSEIDON ®

wir ing diagram

HD HD

HD HD

FixedFocus

FixedFocus

HD HD

HD HDPan PanZoom Zoom


CCTV Cameras Resolution 4 Mega PixelsFixed FocusPower over InternetRange 15 MetresWhite Body

CCTV Cameras Resolution 2 Mega pixelsFull Pan, Tilt and 20x Zoom ControlPower over InternetRange 15-20m night visionWhite Body

CCTV Cameras Resolution 4 Mega PixelsFixed FocusPower over InternetRange 15 MetresGrey Body

CCTV Cameras Resolution 2 Mega PixelsFull Pan, Tilt and 20x Zoom controlPower over InternetWhite Body

Setting up an AMCS systemhas never been so simple.

Poseidon® Ethernet Switch for camerasInput Power -36 VDCUp to 8 Poseidon CCTV Cameras16 BPS through

Poseidon® Ethernet Switch for Secondary Displays and PLC connectionsPower input: 9-36 VDC48V POE16 BPS through

Poseidon® WiFi Router for remote displays and Cloud accessWireless 802.11ACManagement interfacePower input: 9-36VDC

5350

5355

5351

5354 5360 5361 5362Poseidon® allows up to 8 fixed focus cameras or pan, tilt and zoom

cameras to be displayed on any screen.

The cameras can be controlled by simple

touch gestures on display windows.

Poseidon® is compat ible

with Flir ® camera range.

Connecting the pieces

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER PART NUMBER PART NUMBER PART NUMBER

CCTVCAMERAS

HD

HD

NMEA2000

NMEA2000

J1939

J1939

!

!

MicroPlug

MicroPlug

EngineError

Messages

EngineError

Messages

GPSCompass

GPSCompass

GPSTime

GPSTime

RudderAngle

RudderAngle

HD

HD

NMEA2000®

Standard

NMEA2000®

Standard

J1939Standard

J1939Standard


Compatible with Caterpillar, Cummins, MAN, MTU, Volvo, Yanmar and other inboard or outboard engines.

Selectable SI or American display units.

Certified to work with both J1939 and NMEA2000® devices.

2 to 4 inboard or outboardengines can be displayed on single Multi Engine Display.

Certified to work with both J1939 and NMEA2000® devices.

Dual Engine Display Display size 10”Size: 199 W x 252 H x 52 D

4166

MULTIPLE ENGINE DISPLAYSMultiple Engine Display Display size 19”Size: 513 W x 132 H x 53 D

Selectable SI or American display units.

4161

Compatible with Caterpillar, Cummins, MAN, MTU,Volvo, Yanmar and other inboard and outboard engines.

Features the rudder/steering angle indicator and a GPS Compass Rose and local GPS time from the NMEA2000® network.

Displays 1, 2 3, or 4 fuel tanks.

PART NUMBER

PART NUMBER

POSEIDON®TANK MONITORINGAND CONTROLLINGEXAMPLES

50mA IP66NMEA2000 50mA IP66

NMEA2000

MicroPlug

MicroPlug

IP66 IP66Less than50mA PowerConsumption

Less than50mA PowerConsumption

NMEA2000®

Standard

NMEA2000®

Standard

+44 (0) 1425 610022 | www.osukl.com 2018 | 15

Digital Tank Level Gauge Fuel Transfer Controller

3350-FTC3350

TANKMANAGEMENT

3350-FFuel

3350-W Fresh Water

3350-B Black Water

3350-G Grey Water

3350-FTC Fuel Transfer Controller

3350-GTPO Grey Water Pump Out

3350-HTPO Holding Tank Pump Out

MONITOR & MANAGE FUEL, FRESH, GREY AND BLACK WATER TANKS.

Digital display for fuel, fresh water, grey water or black water tanks.It comes with high and low level alarm sounder and a flashing red LED. Alarm limits are user settable. The sounder can be muted from the front panel. Fitted with a 10 amp relay that can control an external alarm or device.The blue LED display automatically adjusts its brightness to the ambient light levels.Certified to the NMEA2000® standard. Attaches to the network using a single “Micro” plug. Draws less than 150mA from the network.Panel seal is to IP66.

Start the pump out manually and it’ll stop automatically when the tank is empty.The user can also manually stop the pump out at any time.The controller is fitted with a 10 amp relay to control the pump out pump. It mounts in a 2” diameter panel hole and the front and panel seal is to IP66.The blue LED display automatically adjusts its brightness to the ambient light levels.The red LED indicates when the pump out is in progress.It attaches to the NMEA2000® network using a single “Micro” plug and draws less than 150mA from the network.

PART NUMBER PART NUMBER

50mA 50mANMEA2000

NMEA2000

MicroPlug

MicroPlug

NMEA2000®

Standard

NMEA2000®

Standard




4660 4661 4662

Volumetric FuelTank Sender

Volumetric WaterLevel Sender

3271 3281

SAE 5 Bolt 1.25” BSP 1.5” NPT

Sender Type 3271 3271T/3281 3271N/3281N

SAE 5 BOLT TO 1¼” BSP SENDER

MOUNTING RING

Standard Sender

Lengths in mm.

Nonstandard

sizes available

upon request.

500 500 500

1000 1000 1000

1500 1500 1500

2000 2000 2000

3271 & 3281 SENDER MOUNTING TYPES

VOLUMETRIC SENDERS

Part No. Depth

4650 0-2m

4651 0-4m

Part No. Depth

4652 0-2m

4653 0-4m

Part No. Depth

4654 0-2m

4655 0-4m

Submersible HydrostaticFresh Water Sensor

Submersible HydrostaticFuel Sensor

465X 465XSubmersible HydrostaticBlack & Grey Water Sensor

465X

Accurate (±2%) measurement and output of the remaining fuel LEVEL or VOLUME.

The sender automatically provides a stilling action to dampen out fuel slosh in the tank to maximise accuracy when conditions are rough or the boat is traveling quickly.The 3271 can be programmed to provide accurate indication of the remaining VOLUME of fuel in the tank. Robust stainless steel construction with no moving parts.The sender monitors the fuel for water contamination and warns if any water is found, preventing from engine damage.

Accurate (±2%) measurement and output of the remaining water LEVEL or VOLUME.

Robustly constructed in stainless steel with no moving parts to stick or fail in service. They are easily cut to length to suit tank depths from 250mm to 2 metres. Manufactured to the NMEA2000® standard and attaches to the network using a single “Micro” plug. It draws less than 50mA from the network.

Submersible hydrostatic fuel sender with 4-20mA output for use with 4291Tank Level Adaptor.

Open faced submersible hydrostatic black and grey water level sender with 4-20mA output for use with 4291 Tank Level Adaptor.

Submersible hydrostatic fresh water sender with 4-20mA output for use with 4291 Tank Level Adaptor.

SUBMERSIBLE HYDROSTATIC TANK SENDERS

CABLE SUPPORT GLANDS

PART NUMBER PART NUMBER PART NUMBER


PART NUMBER

SAE 5 Bolt MountingCable Support Gland Plate Supports submersible Hydrostatic Senders using a standard SAE 5 Bolt mount.

1.25” BSP ThreadedCable Support Gland Plate Supports Submersible Hydrostatic Senders using a 1.25” BSP threaded mount.

1.5” NPT Threaded CableSupport Gland PlateSupports Submersible Hydrostatic Senders using a 1.5” NPT threaded mount.

5x Ø4.5mm holes on Ø54mm

Inner hole Ø47mm

Outer Ø68mm

NMEA2000 IP67

MicroPlug

IP66NMEA2000®

Standard

PLC NMEA2000 50mAIP68

IP68 Less than50mA PowerConsumption

PLCStandard

NMEA2000®

Standard

5250

5250-F Fuel

5250-W Water

42724291 4282

3125 3271-SAM467X 467XNMEA2000IP67 50mA

IP67 NMEA2000®

Standard

MicroPlug


50mANMEA2000

MicroPlug

50mANMEA2000

MicroPlug

NMEA2000

MicroPlug

WAGO®

CageNMEA2000®

Standard

NMEA2000®

Standard


NMEA2000®

Standard


+44 (0) 1425 610022 | www.osukl.com 2018 | 19 18 | 2018 Oceanic Systems Catalogue | Copyright Reserved

Side Mount HydrostaticFuel/Fresh Water SensorSide Mount hydrostatic Fuel/Fresh water tank sender with 4-20mA output for use with 4291 Tank Level Adaptor. G 1/2” Mount.

Side Mount HydrostaticGrey/Black Water SensorSide Mount hydrostatic Grey/Black water tank sender with 4-20mA output for use with 4291 Tank Level Adaptor. G 1/2” Mount.

Part No. Depth

4670 0-2m

4671 0-4m

Part No. Depth

4672 0-2m

4673 0-4m

Provides accurate volumetric tank contents information directly to the NMEA2000® network.Available with a range of attachment threads to suit most applications including ¼” BSP, SAE J1926-1-4 and M12.The senders have a user settable device instance (address) switch to make installation easy and allow up to 16 senders of each type on a single network.The sender’s body is NOT waterproof and must be protected from water splashes or immersion.

Provides accurate Volumetric Tank contents information directly to the NMEA2000® network.Available with a range of attachment threads to suit most applications including ¼” BSP, SAE J1926-1-4 and M12.The senders have a user settable device instance (address) switch to make installation easy and to allow up to 16 senders of each type on a single network.The sender’s body is NOT waterproof and must be protected from water splashes or immersion.

Hydrostatic Side Mount Fuel Sender with NMEA2000® interface

Hydrostatic Side Mount Fresh Water Sender with NMEA2000® interface

Hydrostatic Side Mount Senders are available with a range of attachment threads to suit most applications including ¼” BSP, SAE J1926-1-4 and M12.

SIDE MOUNT HYDROSTATIC TANK SENDERS

4-20mA Tank Level AdaptorDesigned for use with any 4-20mA Tank Sender above to monitor Fuel, Fresh Water, Waste Water, Live Well, Oil & Black Water senders on the NMEA2000® network.The 4291 can be configured to a volumetric output.

Tank LevelSender AdaptorAllows a standard resistive tank level sender to connect to the NMEA2000® network.It is compatible with both European standard 0-180 Ohm and United States standard240-30 Ohm tank level senders and is accurate to ±1%.It is easily configurable to resistive senders from Fuel, Fresh water, Waste water, Live Well, Oil and Black water tanks linking them to the NMEA2000® network. It supports up to 16 tanks of each type on a single network.The unit is simply set up with two small rotary switches and does NOT need any external display unit to do this.Robust & constructed to the IEC60945 standard to ensure high reliability.

Solves the problem of inaccurate tank readings in long tanks due to the tank contents moving whilst the vessel is under power. The unit averages the readings from two tank senders to allow for tank contents moving whilst underway.3271 SAM signals if either sender is missing or water have been detected in the tank.

Sender Averaging Module

PART NUMBERPART NUMBER PART NUMBER

PART NUMBER


Deck Level GaugePREVENT OVERSPILL

Provides an accurate and clear display of Fuel and Fresh Water tank level at the point of filling. It is designed to be installed near to the tank filler to avoid refuelling spills and prevent water pollution incidents.Its clear blue LED display automatically adjusts brightness to the ambient light levels.Stainless steel bezel that is easy to install.The unit is designed and certified to work with NMEA2000® network or with a 0-10V PLC output.Constructed to meet the IEC60945 standard.

PART NUMBER

ACMONITORING

POSEIDON®AC SYSTEMEXAMPLES

NMEA2000

NMEA2000

DINRail

DINRail

WAGO®

CageWAGO®

CageNMEA2000®

Standard

NMEA2000®

Standard

+44 (0) 1425 610022 | www.osukl.com 2018 | 21

3420 3423AC Monitor AC Current Transformer

Are you switched on? The 3420 AC Monitor measures the AC voltage, current and frequency with precision and reports data over the NMEA2000® network.

DC

3410 3412DC Monitor DC Current Transformer

Measure the DC voltage, the DC current along with state of charge and the battery life remaining at the current rate of discharge and more.

3415500 Amp DC Shunt

34161200 Amp DC Shunt

The 3420 accurately measures the AC voltage, AC current and AC Frequency.The unit can be used for Single Phase, Bi-Phase and Three Phasesystems and is suitable for measuring AC sources such as Shore Power, Generators or Invertors. It can also measure the voltage and frequency on AC Bus Bar Systems.The unit has inputs for up to three phase voltages and up tothree-phase current transformers. It is supplied with a single phase current transformer. Additional transformers will be required to measure Bi-Phase or Three Phase circuits.The voltage sensing is by simple phase and neutral connection to the unit. Current sensing is done by a state of the art AC Current Transformer placed around the conductor with no need to break the connection.

Suitable for Single Phase,Bi-Phase and Three Phase systems.

Accurately measures the DC voltage, the DC current of the attached battery and monitors the state of charge. It also calculates the remaining capacity of the battery at the current rate of discharge.The unit can be used for batteries, solar panels and wind generators. It keeps a track of loads and battery usage even when the NMEA2000® network is powered off.Uses the 3412, 3415 or 3416 current transformer or shunts.

Designed to measure DC currents of -200A to +200A and provide a voltage output that can be measured on 3410 DC Monitor.

The 3415 500 Amp DC Current Shunt is designed to measure DC currents of 500A to +500A for use with Oceanic 3410 DC Monitor.

The 3416 1200 Amp DC Current Shunt is designed to measure DC currents of -1200A to +1200A for use with Oceanic 3410 DC Monitor.


PART NUMBER

PART NUMBER

PART NUMBER

0-200 Amp Current Transformer for use with 3420 to measure each additional phase.

TEMPERATURE MONITORING

NMEA2000

NMEA2000

NMEA2000

IP67

MicroPlug

MicroPlug

MicroPlug

IP30

IP30

IP66NMEA2000®

Standard

NMEA2000®

Standard

NMEA2000®

Standard

Cabin Air Temperature Sensor

Liquid Temperature ProbeRing Bolt Temperature Probe

Rugged Engine Room Probe

4522

45234524

4525

Designed to accurately measure the air temperature in a boat cabin using a highly accurate type K thermocouple mounted in an attractive white plastic enclosure. The unit is designed to be wired to an Oceanic Systems 4521 Temperature Input Module.

Rugged, robust temperature probe made for sensing the temperature of various liquids around the vessel.

Rugged, robust temperature probe for sensing the temperature of various components around the vessel.

The 4525 is an essential piece of equipment for your vessel. It is perfect for taking air temperature readings across a variety of locations.

NMEA2000

DINRail

WAGO®Cage

NMEA2000®

Standard

Monitors up to 4 type K thermocouples.These can include our Rugged Engine Room Temperature Sensor 4525, Cabin Air Temperature Sensor 4522, Liquid Temperature Sensor 4523 and Ring Bolt Temperature Sensor 4524. The unit will also work with standard type K Temperature Sensors supplied by user.The unit has user-configurable temperature source information for each channel and a red warning LED that lights up in case of malfunction.Can be either panel mounted or DIN-rail mounted using the clips supplied.

4 Channel Temperature Module

4521IP30

IP30


PART NUMBER

PART NUMBER


PART NUMBER

4510 4511Exhaust Gas Temperature SensorDesigned to measure the exhaust gas temperature of a marine engine or generator. It uses a highly accurate Type T thermocouple and reports the temperature directly onto the NMEA2000® network.It shows the actual temperature to prevent partial cooling water blockages before any damage occurs.

Exhaust Gas Temperature ProbeThe probe is designed to be easily mounted in the exhaust hose with an armoured stainless steel sheathed cable to the NMEA2000® sensor module mounted within 3 metres. The probe mount is a corrosion resistant duplex stainless steel pocket that is sealed to prevent any exhaust leaks.

PART NUMBERPART NUMBER

LP/ PUMPPRESSURE

BAR

0

LP/ PUMPPRESSURE

BAR

0

PRESSURE MONITORING

There are many pressure points to measure on a vessel including oil pressure, compressed air pressure, multiple hydraulic systems, water pressure and water maker systems, fuel pressure monitoring and fuel filter condition monitoring.

AIRFLOWMONITORING

NMEA2000

NMEA2000®

Standard

NMEA2000

NMEA2000®

Standard

NMEA2000

NMEA2000®

Standard

NMEA2000

NMEA2000®

Standard


5700 5701

5704

Air Flow Monitor Measures 0-125 m3/hrAdjustable Alarm set pointLocal Display

Air Flow Remote DisplayRemote Display with alarm and mute panel for 5700.

Duct Flow ProbeDuct Probe 95mm longOther lengths available

57XX 57XXPVC Tubing RedPVC tubing from Duct Probeto 5700 Air Flow Monitor.

PVC Tubing BluePVC tubing from Duct Probeto 5700 Air Flow Monitor.

Part No. Length

5716 2m

5717 25m

Part No. Length

5718 2m

5719 25m

Part No. Length

5703 0-2m

5704 0-4m

PART NUMBER


PART NUMBER

PART NUMBER

Vacuum Sensor

Vacuum Sensors range4620-4626

Vacuum and Pressure Sensors from - 1 Bar to 5000 PSI. These sensors have a 1/2” Gthreaded attachment and a 4-20mA standard output.

Part No. Pressure range

4620 Vacuum -1 Bar

4621 Pressure 0-3 PSI






4-20mA Poseidon Vacuum and Pressure Sensors

4601NMEA2000® 4-20mA pressure adaptorDesigned to monitor any 4 – 20mA pressure source including Atmospheric, Water, Steam, Compressed Air, Hydraulic, Oil & Fuel on the NMEA2000® network. It provides a standard NMEA2000® pressure PGN130314 over the network and is an important part of our complete Poseidon® Monitoring and Digital Switching System.

PART NUMBER

PART NUMBER

DIGITAL SWITCHINGSWITCH INPUT MODULE | RELAY OUTPUT MODULE

MODBUS GATEWAY

ADAPTORS

NMEA2000 IP67

MicroPlug

IP66

Relay Output Module

3478

Allows messages over the NMEA2000® network to directly control 8 power relays using standard NMEA2000® PGN messages.Each of these relays are totally isolated and can be connected to any mix of DC or AC control circuits, each controlling up to 8 Amps at 35 Volts for DC or up to 16 Amps at 250 Volts AC resistive load.The relay would be supporting remote alarm inputs, pump management, power switching connectors, light control and many other applications where power needs to be controlled over the network.Each 3478 has a switch settable Switch Bank Instance to allow multiple Relay Output Modules on a single network.Each relay output has a green LED to indicate when each relay is operated.The 3478 is operated from the standard NMEA2000® Switch Bank Control PGN 127502 from any NMEA2000® controller. The unit also transmits the standard NMEA2000® Switch Bank Status PGN 127501 every 2 seconds to keep the network updated.

NMEA2000

MicroPlug

IP40

IP40

NMEA2000®

Standard

NMEA2000®

Standard

Switch Input ModuleThe 4410 16 Channel Switch Input Module monitors switch closure devices and reports their status over the NMEA2000® network.These devices can include fire/smoke/carbon monoxide detectors, bilge and flood float detectors, doorway and porthole closure detectors, valve status detectors and many more. With this module and suitable NMEA2000® displays the status of all these items can be viewed anywhere on the vessel.The unit has PLC quality inputs that are manufactured to IEC 61131 and IEC61000 standards so they are optically isolated and fully protected against ESD, Voltage Surges and Transients to ensure the most reliable operation at all times.It is compatible with either 12 or 24 Volt systems. It requires NO user setup menus but the simple setting of two small rotary address switches so multiple Switch Input Modules can exist on the same network.Each switch input also has a tell tale green LED to indicate when it is active.

NMEA2000

NMEA2000

NMEA2000

NMEA2000

IP67

IP67

IP67 IP67

MicroPlug

MicroPlug

MicroPlug

MicroPlug

IP66

IP66

IP67 IP66

NMEA2000®

Standard

NMEA2000®

Standard

NMEA2000®

Standard

NMEA2000®

Standard

NMEA2000®to VE.Can® Adaptor

Modbus Gateway

Rudder Angle Adaptor Bennett Trim Tab Adaptor

Allows standard NMEA2000® sensors to be connected to Victron’s VE.Can® network.Housed in a black anodised case this unit converts the high voltage VE.Can® power down to the NMEA2000® 12 volt standard and current limits it to 100mA or 2 LENs. The green power LED indicates that the VE.Can® voltage is present and that the attached NMEA2000® device is not drawing too much current.The unit has the standard VE.Can® twin RJ45 sockets to allow the Victron network to be daisy chained, as well as single NMEA2000® micro C socket.The 5802 is built to the IEC 60945 protected standard.

Provides a powerful solution to convert NMEA2000® messages from engines, tank senders, generators, AC monitors, battery banks, battery chargers and control switches to the Modbus RS485 format.Large yacht monitoring systems use the Modbus RS485 standard to communicate with PLCs and sensors on board to control and monitor on board systems such as tank levels, pump, ventilators, lighting, alarms and other equipment.The Modbus Gateway system can interpret the NMEA2000® data from the attached devices and even control up to 8 banks of 28 switches/relays to control on board facilities.

Allows standard European or American standard resistive rudder angle senders to transmit theirrudder position over the NMEA2000® network.Simple installation with NO user setup or calibration required.In multiple rudder installations the sender type selection and the device instance setup is simply done with the small rotary switch on the unit.The 3165 has a red port LED and a green starboard LED that flash to indicate the unit is transmitting the appropriate rudder position. The mechanical setup of the rudder angle sender is greatly simplified by setting the rudder midships and then adjusting the linkage to the sender until both LEDs illuminate when the sender is also at midships.

Designed to measure the Inductive sensors in Bennett Trim Tabs and relay their position over multiple interfaces.This unit enables the user to see the trim tabpositions on a suitable display to enable control settings for the best ride and lowest fuel consumption.The Trim Tab Adaptor is water resistant to IP68. It is designed to be mounted case up in a protected location.

J1939NMEA2000

J1939Sandard

DINRail

WAGO®

Cage

WAGO®

Cage

NMEA2000®

Standard

Transmits standard J1939 engine messages onto the NMEA2000® network. LEDs indicate when J1939 messages are received and when NMEA2000® messages are transmitted. The J1939 interface is optically isolated to prevent ground loop problems and is read only. No messages are sent to the J1939 interface for absolute safety. Multiple Adaptors can exist on the same network.

J1939 to NMEA2000® Adaptor

DINRail

DINRail


PART NUMBER

5802

4410

3185

3155

3165 5801


PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER


CABLES&

CONNECTORS Female Blanking Plug

Micro Female Terminator

Male Blanking Plug

Micro Male Terminator

Micro Inline TerminatorMicro Bulkhead FeedThrough

3801-F

3803

3801

3804

38083807

Our cables and connectors range has been developed to satisfy customer requirements for installing an NMEA2000® network in a vessel.

Micro Female FieldInstallable Connector

Micro Male FieldInstallable Connector

3805 3806

Micro Trunk to MicroDrop Tee Adaptor

Micro Dual Tee Adaptor

3802

3802-2Micro Quad Tee Adaptor

3802-4

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER


PART NUMBER

PART NUMBER

PART NUMBER

Micro Elbow Adaptor

3840


Micro Trunk Drop Cable

3810-19

Part no. Length

3810 0.5m

3811 1m

3812 2m

3813 3m

3815 5m

3819 10m

Micro Trunk/Drop Cable Male/Male

Micro Trunk/Drop Cable Female/Female

Micro Network Starter Kit

Micro Elbow Adaptor Female, 90°Male

3825 3826

3800

3827-29

Part No. Length

3827 0.2m

3828 0.5m

3829 1m

Micro Cable100 Metre Reel

382124V to 12V Power Adaptor

3890

NETWORK STARTER KIT

The Network Starter Kit includes:

1 x 2 Metre Power Cord1 x Male Terminator1 x Female Terminator2 x Tee connectors1 x 2 metre network trunk cable

Volvo/Suzuki Hubto NMEA2000® Micro Female Socket Adaptor

Honda Outboard to NMEA2000®

Male Connector

3851 3852Yamaha Hub to NMEA2000® Female Connector

3861

PART NUMBER

PART NUMBER


PART NUMBER

PART NUMBER PART NUMBER PART NUMBERPART NUMBER

PART NUMBER

Length: 0.5mLength: 0.5m

Micro Power Tee Dual Feed

3832PART NUMBER

Oceanic Systems (UK) Ltd

Oceanic Systems America

[email protected]: +44 (0) 1425 610022

[email protected]: (844) 898 6462

Units 10-11Milton Business Centre

Wick Drive, New MiltonBH25 6RH, UK

USA

Documents

2018 PRODUCT GUIDE - Oceanic Systems (UK) LtdOceanic Systems (UK) Ltd is a world leading manufacturer of NMEA2000® based Integrated Alarm, Display and Control Systems for leisure