2019 · 2019. 7. 14. · Armour Safety within 7 days of delivery. • All approved product returns are subject to a restocking fee of 10%. • Where applicable, all Armour Safety

2019

WHOLESALERS OF:

• All pricing excludes GST of 15%.

• All prices exclude freight costs.

• Minimum order quantity is for inner or pack sizes. Orders may be increased to these quantities at our discretion.

• All orders will have delivery costs added unless it has been negotiated with Armour Safety by prior arrangement. - Free freight is offered on orders over $500 nationwide (ex GST).

• Products cannot be returned to Armour Safety without prior approval and a corresponding Return Authorisation (RA) number.

• All product returns must be notified to Armour Safety within 7 days of delivery.

• All approved product returns are subject to a restocking fee of 10%.

• Where applicable, all Armour Safety and Agency products are approved to Australian/New Zealand Standards.

• Armour Safety reserves the right to change product specifications or pricing without notice.

Terms & Conditions of Trade

GLOVE PROTECTION STANDARDS

AS/NZS 2161.5:1998 PROTECTION AGAINSTCOLD (EN511)

Place your right hand flat on chart below, aligning your index finger with the left edge of the page.The webbing between your index finger and thumb should be over the WHITE X.With your hand on the chart choose the sizing line closest to the edge of your right hand

ALIG

N IN

DEX

FING

ER T

HIS

PAGE

EDG

E

PERFORMANCE LEVEL 1 2 3 4

a. Burning behaviour - After flare time <20s <10s <3s <2s

a. Burning behaviour - After glow time N/A <120s <25s <5s

b. Contact heat - Contact temperature 100̊ C 250̊ C 350˚C 500˚C

b. Contact heat - threshold time >15s >15s >15s >15s

c. Convective heat (heat transfer delay) >4s >7s >10s >18s

d. Radiant heat (heattransfer delay) >7s >20s >50s >95s

e. Small drops molten metal (#drops) >10s >15s >25s >35s

f. Large quantity molten metal (mass) 30g 60g 120g 200g

The ‘Low Chemical resistant’ or‘Waterproof’ glove pictogram is tobe used for those gloves that donot achieve a breakthrough time ofat least 30 minutes against at leastthree chemicals from the definedlist, but which comply with thePenetration test.

The ‘Micro-organism’ pictogram is to be used when the glove conforms to at least a performance level 2 for the Penetration test.

Permeation: Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

The ‘Chemical resistant’ glove pictogram must be accompanied by a 3-digit code. This code refers to the code letters of 3 chemicals (from a list of 12 standarddefined chemicals), for which a break-through time of at least 30 minutes has been obtained.

MEASURED BREAKTHROUGH PROTECTION TIME INDEX

> 10 minutes class 1






CODE CHEMICAL CATEGORY

A Methanol Primary alcohol

B Acetone Ketone

C Acetonitrile Nitrile compound

D Dichloromethane Chlorinated paraffin

E Carbon disulfide Sulphur containing organic compound

F Toluen Aromatic hydrocarbon

G Diethylamine Amine

H Tetrahydrofuran Heterocyclic and ethereal compound

I Ethyl acetate Ester

J n-Heptan Saturated hydrocarbon

K Sodium hydroxide 40% Inorganic base

L Sulfuric acid 96% Inorganic mineral acid

ABRASION RESISTANCE: How well can the material of the glove resist exposure to repeated abrasion.BLADE CUT RESISTANCE: How well can the material of the glove resist cutting objects.TEAR RESISTANCE: What force is needed to enlarge, by tearing a precut hole in the material of the glove.PUNCTURE RESISTANCE: What force is needed to puncture the palm of the glove with a calibrated spike.

AS/NZS 2161.3:2005 - PROTECTION AGAINSTMECHANICAL RISKS (EN388)

Mechanical risk is the risk caused by abrasion,blade cut, tear and puncture to the wearer of theglove. A tested item is given a performance ratingof 1 to 4 (lowest to highest) on some or all of thelisted categories. The ‘blade cut resistance’ test isan exception as it measures from 1 to 5.

Abrasion resistance

Blade cut resistance

Puncture resistance

Tear resistance

4 5 4 4

The performance values assigned against eachtest factor correspond approximately to thefollowing values.

AS/NZS2161.4:1999-PROTECTION AGAINSTTHERMAL RISKS - HEAT & FIRE (EN407)

This diagram details the testing categories for EN407: 2004. A tested item is given a performance rating of 1 to 4 (lowest to highest) on some or all of the listed categories. Frequently an ‘x’ will replace one or more of the numbers, this means that the corresponding test was not performed.

AS/NZS 2161.10:2005 PROTECTION AGAINSTCHEMICALS & MICRO-ORGANISMS (EN374)

This standard specifies the capability of gloves to protect the user against chemicals and/or microorganisms.

THE GLOVES LENGTH OF LIFE. Degradation is rated according to the change in integrity following chemical exposure. The rate of degradation depends on which chemical the glove has come in contact with.PENETRATION - is the flow of chemicals andmicro-organisms through the porous material,seams, small holes or other small defects inthe glove material.PERMEATION - is the process where a chemicalpasses through the glove’s material on a molecularlevel. Permeation means the following: a chemical’smolecules penetration through the outer material ofthe glove. Diffusion is the movement of moleculesthrough the material. Desorption is the outwardflow of molecules from inside the glove.

burning behaviourcontact heatconvective heatradiant heatsmall splashes of molten metallarge quantities of molten metal

a b c d e f

GLOVE SIZING CHART

PERFORMANCE LEVEL RATINGTEST 1 2 3 4 5

Abrasion resistance (cycles) 100 500 2000 8000 -

Blade cut resistance (factor) 1.1 2.5 5.0 10.0 20.0

Tear resistance (newtons) 10 25 50 75 -

Puncture resistance (newtons) 20 60 100 150 -

XS S M L XL 2XL 3XL 6 7 8 9 10 11 12

This diagram applies to products that protect against convective and contact cold down to -50°CA performance rating of 1 to 4 (lowest to highest) 1 signifies a pass. Frequently an ‘X’ will replace one or more of the numbers, this means that the corresponding test was not performed.

convective coldcontact coldpermeability by water

4 4 4

SUPERIORCUT PROTECTION

GARMENTS

Hard Working Safety Equipment

ARMOUR SAFETY (2012) LTD ARE YOUR APPOINTED 3M SCOTT SAFETY PRODUCTS NATIONAL WHOLESALER

Featured brands include:• 3M™ • Peltor™ • E-A-R™ • Airstream™

• Powerflow™ • Versaflo™

• Safety-Walk™ • Attest™ • Petrifilm™

• Scotch-Brite™ • Scotchgard™

Innovative Technology For Protective Comfort

Experience Armour Safetys’ own brand of quality

competitively priced range of safety equipment.

WITH GRIP

Pioneers in developing task-specific gloves and constant innovation in order to celebrate and support the real everyday heroes of the world.

Designed to perform in challenging low temperatures

2 GREAT THERMAL APPAREL OPTIONS

The best range & service in the industry

GUARANTEED. TESTED. IN STOCK.

THE HEAVY DUTY NITRILE WITH GRIP

THE STRONG & DEXTEROUS NITRILE

FDAREGISTEREDU.S.A.

FDAREGISTEREDU.S.A.

CEEUROPE

CEEUROPE

• MEDICAL & FOOD GRADE • AMBIDEXTROUS •

SAME GLOVENEW PACK

30CMEXTENDED

CUFF

DISPOSABLE GLOVES

THE HIGH RISK INDUSTRIAL LATEX

HAND PROTECTION ATG® GLOVES POLYCOTTON / COTTON / NYLON VINYL / LATEX / NITRILE DISPOSABLES RUBBER / LATEX PVC HIGH VOLTAGE WELDING DRIVER / RIGGER / WORK NITRILE

CUT RESISTANT FOOD PROCESSING INDUSTRIAL

HEAD PROTECTION HEAD / FACE EYEWEAR RESPIRATORY HEARING

WELDING APPAREL WELDING / FLAME RETARDANT GLASS PROTECTION CLOTHING / BLANKETS

APPAREL VESTS RAINWEAR FREEZER WEAR

PROTECTIVE CLOTHING COVERALLS APRONS SLEEVES HEADWEAR

FOOTWEAR BOOTS / SHOES / GUMBOOTS

TRAFFIC CONES / MESH / TAPES

SAFETY CUTTERS CUTSAFE KLEVER ® DIPLOMAT ® ACCESSORIES

FIRST AID

WHOLESALERS OF:

MAXIFLEX

MAXIFLEX Endurance Fully Coated42-847Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 144

MAXIFLEX Ultimate Fully Coated42-876Length: 25cmCoating: NITRILESizes: S - 3XLPack: 12Carton: 144

0800 148 383WWW.ARMOURSAFETY.CO.NZ

MAXIFLEX Endurance Half Coat42-845Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 144

MAXIFLEX Ultimate Open Back42-874Length: 25cmCoating: NITRILESizes: XS - 3XLPack: 12Carton: 144

MAXIFLEX Endurance Open Back42-844Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 144

• AD-APT® technology allows 31% sweat reduction• 25% thinner and twice the mechanical performance• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip• Duratech®- withstands 18,000 abrasive cycles per mm

• 360° breathability - best on the market today• 25% thinner and twice the mechanical performance• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip• Duratech®- withstands 18,000 abrasive cycles per mm


Hand Protection



Han

d Pr

otec

tion

MAXICUT

MAXIDRY

• LiquiTech® provides liquid and chemical resistance• Super light seamless nylon liner• Elasticated wrist support for a ‘locking’ snug fit• Smooth and rounded fingertips, improving sensitivity• Superb fit & dexterity for liquid style glove• GripTech® “micro-cup” finish enhances grip

MAXIDRY General Purpose Half Coat56-425Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 72

MAXIDRY General Purpose Gauntlet - 27cm56-426Length: 27cmCoating: NITRILE BUTADIENE RUBBERSizes: L & 2XLPack: 12Carton: 72

• A MAXIFLEX® with oil repellence• Super light seamless very fine gauge knit liner• Tailored cuff maintaining your fingers at the tip• Smooth and rounded fingertips, improving sensitivity• Superb sensitivity, fit & dexterity for liquid style glove• GripTech® “micro-cup” finish enhances grip• LiquiTech® provides liquid and chemical resistance

MAXIFLEX Cut 3 Open Back34-8743Length: 25cmCoating: NITRILESizes: S - 3XLPack: 12Carton: 72

• 360° breathability - best on the market today• High performance yarns and fibres for cut protection• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip• Reinforcement in an inherently weak thumb & finger area

MAXICUT 3 Leather PalmOpen Back34-450LP Length: 25cmCoating: NITRILESizes: M - 3XLPack: 12Carton: 72

• Cut resistence level 3 protection• LiquiTech® provides liquid and oil resistance• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip

MAXIDRY

MAXICUT 5 Ultra Open Back44-3745Length: 25cmCoating: NITRILESizes: XS - 3XLPack: 12Carton: 72

MAXICUT 5 Ultra Open Back - 30cm44-374530Length: 30cmCoating: NitrileSizes: S - 2XLPack: 12Carton: 72

• 360° breathability - best on the market today• High performance yarns and fibres for cut 5 protection• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip• Reinforcement in an inherently weak thumb & finger area

• Extra length at 30cm• 360° breathability - best on the market today• High performance yarns and fibres for cut 5 protection• Form, fit and feel - mimics the “hand at rest”• Smooth and rounded fingertips, improving sensitivity• Soft liner only contacts the skin• GripTech® “micro-cup” finish enhances grip• Reinforcement in an inherently weak thumb & finger area


MAXICHEM

MAXIDRY

THERMAL GLOVES

MAXITHERM Open Back 30-201Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 72

• For wet or dry applications in cold conditions• Seamless knit liner imparting thermal insulation• Tailored cuff maintaining your fingers at the tip• Flat dipping process for breathability & reduces perspiration• Rubber finish enhances grip properties• Brushed liner is soft &comfortable providing warmth

MAXIDRY Zero 56-451Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 72

• A food standard MAXIFLEX® for cold climates• LiquiTech® keeps moisture from the skin • Super light seamless very fine gauge knit liner• Tailored cuff maintaining your fingers at the tip• Smooth and rounded fingertips, improving sensitivity• Superb fit, dexterity and warmth for > -30ºC• GripTech® delivered through an ultra soft coating

Hand Protection

MAXIDRY Plus Gauntlet 30cm56-530Length: 30cmCoating: SYNTHETICSizes: S - 2XLPack: 12Carton: 72

MAXIDRY Zero 56-451Length: 25cmCoating: NITRILESizes: S - 2XLPack: 12Carton: 72

• LiquiTech® provides liquid and chemical resistance• Super light seamless nylon liner• Elasticated wrist support for a ‘locking’ snug fit• Smooth and rounded fingertips, improving sensitivity• Superb fit & dexterity for liquid style glove• GripTech® “micro-cup” finish enhances grip

• A food standard MAXIFLEX® for cold climates• LiquiTech® keeps moisture from the skin • Super light seamless very fine gauge knit liner• Tailored cuff maintaining your fingers at the tip• Smooth and rounded fingertips, improving sensitivity• Superb fit, dexterity and warmth for > -30ºC• GripTech® delivered through an ultra soft coating

MAXICHEM Gauntlet 35cm 56-635 Length: 35cmCoating: NITRILESizes: M - 2XLPack: 12Carton: 72

• Ultra lightweight, synthetic latex coated gauntlet• Chemical resistance (EN374-3 AKL)• MaxiGrip technology for oily & wet conditions• Strategic placement of coating system for dexterity • Elasticised locking cuff • Snug fitting wrist support


Han

d Pr

otec

tion

POLYCOTTON / COTTON / NYLON

Polycotton Black Dot Glove#COPCBD

Size: LPack: 12Carton: 240

Polycotton Glove#COPC

Size: M - XLPack: 12Carton: 240

• Polycotton knit• Black PVC grip dots on palm• Durable• ‘A’ grade• 600 grams per dozen

• Economical• Picking, packing & assembly• Sensitivity & dexterity• Reversible

Cotton Interlock Glove#COINT

Size: S / LPack: 12Carton: 240

• Light cotton fabric • Excellent dexterity• Light assembly work• Reversible• Suitable as an inner glove

Nylon Glove#CONYLON

Size: S - LPack: 12Carton: 240

• Lint free• Durable• Ambidextrous & reversible• Smooth untextured feel• Cleaning, assembly & inspection

Loop Pile Terry Knit Glove #COLPG35

Size: 35cmPack: 12Carton: 60

Loop Pile Terry Knit Sleeve #COLPS35


Acrylic Thermal Liner#COTHERM


• Knitted cotton terry loop pile • Medium heat situations• Ideal for bakers • 35cm long

• Suitable as an inner glove in PVC Gloves• Acrylic fleece liner• Performs to - 5’C

• Knitted cotton terry loop pile • Medium heat situations• Ideal for bakers • 35cm long

VINYL / LATEX / NITRILE DISPOSABLES

#DGOAHDGSize: S - XLPack: 100Carton: 10

2XL4510

2XL9010

3XL4010

• Industrial strength, & dexterity. • Designed for chemical & puncture environments • Medical & FDA food grade• 30cm length, ambidextrous

• Designed for automotive, engineering, mechanical & heavy industrial environments • Useful as skin protection from paints dyes, chemicals & un-hygenic conditions• Medical & FDA food grade• Ambidextrous

FDAREGISTEREDU.S.A.

CEEUROPE

• Superior strength, durability & grip.

ARMOUR Vinyl Diposable - Powder free#DGCVINPF

Size: S - XLBox: 100Carton: 10 BOXES

ARMOUR Vinyl Diposable - Powdered 10 pack#DGVINP10

Size: M - LPack: 10Carton: 240 PACKS

• Clear or Blue• Premium food handling • Durable and hygienic• Economical• Powder-free• Powdered available

Clear Vinyl gloves:• Retail packs of 10 gloves• Barcoded • As stocked by Pak & Save and New World

BLACK ARMOUR Nitrile Disposable - 10 Pack#DGBARP

Size: M - LPack: 12Carton: 240 PACKS

Latex Disposable - Powdered#DGCLAT


• Super strong & tough • Powder free nitrile• Unbelievable feel• Textured surface• Anti Sweat

Black ARMOUR gloves:• Retail packs of 10 gloves• Barcoded • As stocked by Pak & Save and New World

• Latex for better dexterity & sensitivity than vinyl• Powdered• Powder-free available

Vinyl Metal Detectable#DGMD

Size: L - XLPack: 100Carton: 10 BOXES

Nitrile Blue Disposable - Powder Free#DGNITPF

Size: S - 2XLBox: 100Carton: 10 BOXES

• Heavy duty vinyl • Powder-free• 1.5mm metal implant• FDA compliant• Food handling specialist

• Up to 4 x stronger than latex • Fats, chemical & petroleum resistant• Powder-free• Ambidextrous.

Latex Disposable - Powder free#DGCLATPF


• Latex for better dexterity & sensitivity than vinyl• Powder free• Powdered available

Vinyl Diposable- Powdered#DGCVIN

Size: S- XLBox: 100Carton: 10 BOXES

• Clear or Blue• Premium food handling • Durable and hygienic• Economical• Powdered• Powder-free available

HiRISK ARMOUR Latex Disposable ORANGE ARMOUR Heavy Duty Nitrile Grip Glove

BLACK ARMOUR Nitrile Disposable

#DGBASize: S - XLPack: 100Carton: 10

2XL9010

3XL8010

#DGBLHRSize: S - XLPack: 50Carton: 10

Hand Protection


Han

d Pr

otec

tion


RUBBER / LATEX GLOVES

2XL4510

3XL4010

• Industrial strength, & dexterity. • Designed for chemical & puncture environments • Medical & FDA food grade• 30cm length, ambidextrous

HiRISK ARMOUR Latex Disposable

#DGBLHRSize: S - XLPack: 50Carton: 10

ARMOUR Red Latex Open Back#RURD

Size: L - 2XLPack: 12Carton: 120

ARMOUR Yellow Latex Fully Coated- 27cm #RUYFC

Size: XL-2XLPack: 12Carton: 120

• Maximum ‘A’ grade rubber protection for palm & fingers • Loosely woven, cotton liner • Elasticised knit wrist • Open back for breathability• Stippled grip pattern

Blue Latex Chemical Contact Heat Gauntlet -30cm# RUBL30

Size: S – XLPack: 6Carton: 60

• Contact heat to 250˚ for 15’• Suede grip finished palm• Fully coated protection• Cotton interlock comfort liner • Anatomically shaped• 30cm length to protect forearm• Liquid proof for wet conditions• Durable and washable• Loop for hanging ease

• Multiple dip waterproof crinkle latex grip finish• Cotton jersey lining• Elasticised knit wrist • Abrasion resistance• Glass & shellfish industries

ARMOUR Blue/Grey Latex Open Back #RUBGL

Size: S - XLPack: 12Carton: 120

• Tightly woven, cotton knit lining • Elasticised knit wrist• Latex dipped textured grip • Open back for breathability • Launderable

Yellow Silverlined Gauntlet# RUYSLSize: S – XLPack: 12Carton: 144

Blue Silverlined Gauntlet# RUBSLSize: S – XLPack: 12Carton: 144

• Easy-on-easy-off flock free ‘silver’ lining• Sand pitch anti-slip pattern • Straight cuff for tighter fit• Chlorinated

• Easy-on-easy-off flock free ‘silver’ lining• Sand pitch anti-slip pattern • Straight cuff for tighter fit• Chlorinated

2143

ARMOUR Orange Crinkle Latex Gauntlet- 30cm#RUOR30Size: S - 2XLPack: 6Carton: 60

• Full rubber coated protection• Crinkled grip palm• Cotton interlock liner• Absorbs perspiration • Liquid proof• Durable and launderable

ARMOUR Orange Crinkle Latex Gauntlet- 35cm#RUOR35Size: S - 2XLPack: 6Carton: 60

• Full rubber coated protection• Crinkled grip palm• Gauntlet style arm protection• Cotton interlock liner• Absorbs perspiration • Liquid proof• Durable and launderable

PVC GLOVES

ARMOUR Green PVC Slurry Gauntlet - 65cm#PVCSLURRY


• 65cm full arm protection• Elasticised opening• 35cm double dipped PVC• PVC material for last 30cm• Sandy grip palm finish

ARMOUR Red PVC Gauntlet - 35cm#PVCRD35




• Single dipped PVC.• Brushed cotton liner• Length to protect wrist

• Single dipped PVC.• Brushed cotton liner• Length to protect forearm



• Single dipped PVC• Brushed cotton liner

ARMOUR Red PVCKnit Wrist - 27cm#PVCRDKW27


• Single dipped PVC• Brushed cotton liner• Knit wrist for firm fit

Hand Protection


ARMOUR Green PVC Chemical Gauntlet - 35cm#PVCGRCG35

Size: XL / 35cmPack: 12Carton: 48







• Waterproof, resistance to chemicals, acids & oils• Soft, comfortable fit• High quality PVC coating for durability• Sandy grip finish to hand area




WELDING GLOVES

ARMOUR Leather Smelter Gauntlet - 45cm#LGMELTSize: XLPack: 6Carton: 36

DRIVER / RIGGER GLOVES

ARMOUR Leather Red Welding Gauntlet (Lefties)-40cm#LGWELDRDL


ARMOUR Leather Red Welding Gauntlet - 40cm #LGWELDRD


ARMOUR Leather Blue Welding Gauntlet - 40cm#LGWELDBL


• Premium split leather• One piece back• ‘A’ grade reinforced thumb • Full cotton liner • Kevlar stitched

• Premium split leather• One piece back• ‘A’ grade reinforced thumb • Full cotton liner• Kevlar stitched• Left hand only sold as a pack

• Premium split leather• One piece leather back• Cotton lining for comfort • Welded seams• Double layer palm & thumb• Double layer knuckle bar back

ARMOUR Leather Tig Welding Gauntlet - 30cm#LGTIG

Size: M-XLPack: 12Carton: 72

• Pigskin leather front & back• Greater breathability • Withstands moisture without stiffening • 100mm split leather cuff• Straight thumb with reinforcing• Seamless palm & fingers• Greater feel & sensitivity with age

• Heat resistant split leather• Double stitched with kevlar thread• Thermal lining to the wrist• Velcro forearm strap • Designed for metal industry

ARMOUR Leather Argon Welding Gauntlet - 35cm • Cowhide soft grain leather

• Elasticised, one piece back• Excellent sensitivity & feel• Longer strong cuff• Good for beekeepers or pruning thorns or spikes

#LGARGONSize: LPack: 12Carton: 72

ARMOUR Leather Tig Kevlar Lined Welding Glove – 30cm #LGTIGKEVSize: S–2XLPack: 12Carton: 72

• Goat skin leather front & back• Greater breathability• Withstands moisture without stiffening• Split leather cuff• Kevlar lined & stitched

Leather/Aluminised Glove Saver#WPGLOVE One sizePack: 1Carton 20

• Welding overglove for heat and wear protection• Available as a single glove, left or right hand

ARMOUR Leather Full Split Rigger Glove#LGRIG

Size: L - 2XLPack: 12Carton: 120

ARMOUR Driver/Rigger#LGDR

Size: S - 3XLPack: 12Carton: 120

ARMOUR Leather Full Grain Driver Glove#LGWDG


• Full leather• Well constructed• Good all round work glove

• Soft grain leather drivers glove palm & thumb• Split leather rigger back• Comfortable & practical • Best seller

• “A” grade cowhide all-grain leather• Soft and comfortable• Known as the ‘BDG’• Double stitched• Elastic band sewn into the back

Han

d Pr

otec

tion


0800 148 383

0800 148 383

LEATHER WORK GLOVES

LEATHER VOLTAGE GLOVES

• Premium grain goat leather for better dexterity• Hi Vis Safety cuff• 30cm length• Strap closure for secure fit

• Synthetic leather grip pads also for better wear

• Premium grain goat leather for better dexterity• Synthetic leather grip pads also for better wear• Strap closure for secure fit

• Premium grain goat leather for better dexterity• Strap closure for secure fit

ARMOUR Hi Voltage Leather Over-Glove#LGHVOGSizes: 9-9.5 / 10-10.5 / 11-11.5Pack: 6Carton: 36

ARMOUR Hi Voltage Leather Over-Glove with Grip #LGHVOGG

ARMOUR Low Voltage Leather Over-Glove#LGLVOGGSizes: 9-9.5 / 10-10.5 / 11-11.5Pack: 6Carton: 36

ARMOUR Low Voltage Leather Over-Glove#LGLVOGSizes: 8-8.5 / 9-9.5 / 10-10.5 / 11-11.5Pack: 6Carton: 36

ARMOUR Leather Work Glove#LGWORKSize: LPack: 12Carton: 72

• Full split leather palm, thumb, fingertips, and wide knuckle bar• Heavy duty canvas body• Elastic strip sewn in• Rigid pasted 7cm safety cuff

ARMOUR Leather Work Tough Double Palm #LGWORKDPSize: L- XLPack: 12Carton: 72

• Full split leather palm, thumb, finger tips & wide knuckle bar• Double layer split premium leather palm• Heavy duty canvas body• Elastic strip sewn in• Rigid pasted 70mm safety cuff

Hand Protection


ARMOUR Leather Work Tough Double Palm #LGWORKDPSize: L- XLPack: 12Carton: 72

Han

d Pr

otec

tion


ARMOUR Blue Nitrile Fully Coated Gauntlet - 27cm#NIBLGFC


ARMOUR Blue Nitrile Fully Coated#NIBLKFC

Size: M-2XLPack: 12Carton: 72

• Nitrile double dipped glove• 100% cotton jersey lining • Open ‘safety’ cuff, easy removal• Fully coated & waterproof• Good for rough & tough labour• Known as the Hercules glove

• Nitrile double dipped glove• 100% cotton jersey lining • Fully coated and waterproof • Good for rough & tough labour

ARMOUR Black Nitrile Open Back #NIBLOB


• Seamless nylon inner • Elasticised wrist• Water & chemical protection• Lightweight, great dexterity• Open nylon back for breathability • The ‘rose lovers glove’

ARMOUR Black Foam Nitrile Open Back#NIBLFOB


• 15 gauge nylon/spandex liner• Breathable coating • Black high-tech nitrile foam coating• Open back style

• Reliable solvent resistance• Unlined (flock free)• Abrasion resistance• Grip pattern for in wet / dry conditions• Great sensitivity and dexterity• Compliant with FDA regulations

#DGOAHDGSize: S - XLPack: 100Carton: 10

2XL9010

• Designed for automotive, engineering, mechanical & heavy industrial environments • Useful as skin protection from paints dyes, chemicals & un-hygenic conditions• Medical & FDA food grade• Ambidextrous

ORANGE ARMOUR Heavy Duty Nitrile Grip Glove

FDAREGISTEREDU.S.A.

FDAREGISTEREDU.S.A.

CEEUROPE

• Superior strength, durability & grip. • Super strong & tough • Powder free nitrile• Unbelievable feel• Textured surface• Anti Sweat

BLACK ARMOUR Nitrile Disposable

#DGBASize: S - XLPack: 100Carton: 10

2XL9010

3XL8010

ARMOUR Green Nitrile Interface#NIGRIN

Size: M-2XLPack: 12Carton: 144

• Coating protection against selected chemicals & oils• Cotton interlock liner for extended use comfort• Granulated finish to palm for ideal grip• Excellent abrasion resistance• Ergonomically designed for excellent fit & to reduce hand fatigue

Blue Nitrile Chemical Gauntlet #NIBLCG60

Size: M - XLPack: 6Carton: 48

NITRILE GLOVES

ARMOUR Orange Nitrile Fully Coated #NIORKFC

Size: XL-2XLPack: 12Carton: 120x

• Nitrile single dipped glove• 100% cotton jersey lining • Closed knit wrist to keep out unwanted materials • Open back available


Cut Resistant

BLADE Flat Nitrile Cut 5 Open Back #BLC5NIColour: GREEN/BLACKCoating: NITRILESizes: M - 3XLPack: 12Carton: 120

BLADE Foam Nitrile Cut 5 Open Back #BLC5FNColour: BLUE/BLACKCoating: GRIT FINISHSizes: M - 3XLPack: 12Carton: 120

• Nitrile palm for superior abrasion & water resistance• Cut level 5 resistant liner • Open back for breathability and comfort• Excellent dexterity and flexibility• Long cuff for added wrist protection• Launderable at 40˚water temperature • Fabrication / construction / metal handling / recycling

• Sandy finish coating for excellent grip• Cut level 5 resistant liner • Open back for breathability and comfort• Excellent dexterity and flexibility• Long cuff for added wrist protection.• Launderable at 40˚water temperature• General & heavy industrial use with full blade & point protection

BLADE PU Cut 5 Open Back #BLC5PUColour: GREY/GREYCoating: POLYURETHANESizes: S - 3XLPack: 12Carton: 120

• PU coating• Cut level 5 resistant liner • Open back for breathability and comfort• Excellent dexterity and flexibility• Long cuff for added wrist protection.• Launderable at 40˚water temperature• Meat processing / filleting / food preparation

BLADE Blade Cut 5 Arc Flash Flame Resistant#BLC5AFColour: GREEN/BLACKCoating: GRIT FINISHSizes: S - 2XLPack: 12Carton: 72

• UHMWPE and Aramid yarn• Touchscreen compatible • Oil & chemical resistant and TDM cut level D• Excellent fit for dexterity and flexibility• Good cut performance after multiple launderings• Open back for breathability• Microfoam finish offers excellent grip• Performs in Oil & refining, Electric & Gas and Automotive industries

BLADE Foam Nitrile Cut 5 Fully Coated#BLC5FNWColour: RED/BLACKCoating: GRIT FINISHSizes: M - 3XLPack: 12Carton: 120

• Lightweight 18 guage liner technology reducing hand fatigue• Foam double coated nitrile fully coated• Waterproof, oil resistant and TDM cut level C• Excellent fit for dexterity and flexibility• Sandy surface palm nitrile dip for excellent grip• Industrial assembly /maintenance wet & dry environments

BLADE Nitrile Glove#BLC5FNTSize: M - 3XLPack: 12Carton: 60

• Lightweight 10 guage thermal acrylic inner liner technology performs to -20º• External liner, the latest in Cut 5 protection• Double dipped full coating provides superior liquid protection against water and oils• Excellent soft fit for dexterity, flexibility and grip

CUT RESISTANT INDUSTRIALINDUSTRIAL


• Cut level 5 resistant liner • Excellent protection against blade and point hazards• Breathable and flexible for better comfort• Thumb hole style provides better palm & wrist protection restricting sleeve sliding up the forearm• Superior option for glazing & sheet metal applications• Launderable at 40˚water temperature

• Cut Level 5 Kevlar Liner• Excellent protection against blade and point hazards• Breathable and flexible for better comfort• Thumb hole style provides better palm & wrist protection restricting sleeve sliding up the forearm• Suitable for use in medium heat temperatures

• Cut level 5 resistant liner • Excellent protection against blade and point hazards• Breathable and flexible for better comfort• Superior option for glazing & sheet metal applications • Launderable at 40˚water temperature

BLADE Cut 5 Knit Sleeve with Thumb Hole 39cm#BLC5SL39Colour: GREYSizes: 39CMPack: 12Carton: 120

BLADE Cut 5 Kevlar Sleeve with Thumbhole 39cm#BLC5SLK39Colour: YELLOWSizes: 39CMPack: 12Carton: 120

BLADE Cut 5 Knit Sleeve 30cm#BLC5SL30Colour: GREYSizes: 30CMPack: 12Carton: 120

BLADE Puncture / Cut Resistant Sleeve - 25cm#BLC5NSSLColour: GREEN/BLACKPack: 6Carton: 60

• Spandex wrist with thumbhole for comfort at the palm & wrist• Puncture protection layers still allow for comfort • Medium cut hazards & puncture protection • Steel rope / waste handling, forestry, construction & industry

BLADE Cut 5 Impact Anti Vibration Glove#BLC5HDColour: YELLOW/BLACKCoating: NON SLIP FOAM NITRILESizes: M - 3XLPack: 6Carton: 60

BLADE Puncture / Cut Resistant Glove#BLC5NSColour: GREEN/BLACKPack: 6Carton: 60

• Premium Cut 5 liner protection• Silicon impact TPR for durability and flexibility• Reinforced arch between thumb and forefinger• Launder multiple times with no effect on Cut 5 rating• Chemicals and acid resistance• Micro-foam surface for wet & dry environments• New technology palm inserts for great vibration resistance

• Textured synthetic palm for durable grip in oil • Reinforced palms protect from abrasion, slash & penetration• Puncture protection layers still allow full hand flexibility • High-vis stretch-nylon back provides great dexterity • Close fit neoprene cuff for secure fit • Fabric patch on the thumb for wiping sweat etc• Medium cut hazards & puncture protection • Steel rope / waste handling, small hazardous parts assembly, forestry, construction & industry

CUT RESISTANT INDUSTRIALINDUSTRIAL

Cut R

esis

tant

Cut ResistantSTEEL Food Processing Cut Level 5 #BLC5FPSColour: CHARCOALSizes: S - 2XLPack: 12Carton: 120

GUARD Metal DetectableFood Processing Cut Level 5 #BLC5FPMDW #BLC5FPMDBColour: GREY / BLUESizes: S - 4XLPack: 12Carton: 120

FLURO HiVisibilty Food Processing Cut Level 5 #BLC5FPHVO #BLC5FPHVYColour: ORANGE / YELLOWSizes: S - 4XLPack: 12Carton: 120

CUT RESISTANT FOOD PROCESSINGHIGHEST LEVEL OF HYGIENE

• Multi-washable FDA & EU approved• Newly developed 10-gauge SHIELD™yarn technology• Exceeds EN388 Cut Level 5 by 4 times out of pack• Maintains Cut Level 5 after 60 laundering cycles based on recommended laundering instructions*• Minimal shrinkage (<10%) after 60+ launders• Sanitised for ultra-fresh & anti-microbial protection• Flexible, comfortable & dexterous, ambidextrous design

• Multi-washable FDA & EU approved• Newly developed 10-gauge SHIELD™yarn technology• Exceeds EN388 Cut Level 5 by 4 times out of pack• Maintains Cut Level 5 after 60 laundering cycles based on recommended laundering instructions*• Minimal shrinkage (<10%) after 60+ launders• Sanitised for ultra-fresh & anti-microbial protection• Flexible, comfortable & dexterous, ambidextrous design

• Multi-washable FDA & EU approved• Newly developed 10-gauge SHIELD™ metal detectable yarn technology• Exceeds EN388 Cut Level 5 by 4 times out of pack• Maintains Cut Level 5 after 60 laundering cycles based on recommended laundering instructions* • Minimal shrinkage (<10%) after 60+ launders• Sanitised for ultra-fresh & anti-microbial protection• Flexible, comfortable & dexterous, ambidextrous design

• Multi-washable FDA & EU approved• Newly developed 10-gauge SHIELD™ fluro yarn technology• Exceeds EN388 Cut Level 5 by 4 times out of pack• Maintains Cut Level 5 after 60 laundering cycles based on recommended laundering instructions*• Minimal shrinkage (<10%) after 60+ launders• Sanitised for ultra-fresh & anti-microbial protection• Flexible, comfortable & dexterous, ambidextrous design

• Multi-washable FDA & EU approved• Newly developed 7-gauge SHIELD™metal yarn technology• Exceeds EN388 Cut Level 5 by 4 times out of pack• Maintains Cut Level 5 after 60 laundering cycles based on recommended laundering instructions*• Minimal shrinkage (<10%) after 60+ launders• Sanitised for ultra-fresh & anti-microbial protection• Flexible, comfortable & dexterous, ambidextrous design

CORE Food Processing Cut Level 5 #BLC5FPW #BLC5FPBColour: WHITE / BLUESizes: XS - 5XLPack: 12Carton: 120

CORE Food Processing Cut Level 535cm Long Sleeve #BLC5FPLSColour: WHITE / BLUESizes: S - 3XLPack: 12Carton: 120

FOOD SAFE

60STILL CUT 5

LAUNDERS

MU

LT

I RATE

* LAUNDER INSTRUCTIONS

• Soak 20°C for 3 min - Full water for this and the following wash steps• Detergent wash at 70°C for 6 min• Bleach wash at 70°C for 6 min (note this may impact glove colouration)• Rinse at 60°C for 9 min

BLADE CUT 5 LAUNDERING PERFORMANCE

EN38

8 C

UT

IND

EX

908070605040302010

0

No. OF LAUNDERS0 12 24 36 48 60

STILL OUTPERFORMING THE CUT LEVEL 5 INDEX AFTER 60+ LAUNDERS

CUT LEVEL 5 INDEX = 20

79.7

52.5 45.6 40.8 34.4 28.2

* LAUNDER INSTRUCTIONS

• Soak 20°C for 3 min - Full water for this and the following wash steps• Detergent wash at 70°C for 6 min• Bleach wash at 70°C for 6 min (note this may impact glove colouration)• Rinse at 60°C for 9 min Re

spir

ator

y

RESPIRATORY


ARMOUR Disposable Dust Mask - Basic Nuisance#DRBox: 50Carton 20

ARMOUR Disposable Respirator Non Valve - P2 Mask#DRP2Box: 20Carton 20AS/NZS 1716:2012

ARMOUR Disposable Respirator Valve - P2 Mask#DRP2V Box: 12Carton 20AS/NZS 1716:2012

• Basic dust mask• Single elastic strap• Metal strip to allow moulding to top of nose• Under 10 cents each

• Low breathing resistance• High filtration efficiency • Polypropylene material • Double elastic straps • Adjustable nosepiece • Inner foam for a custom seal

• Silicon exhalation valve• Low breathing resistance• High filtration efficiency • Polypropylene material • Double elastic straps • Adjustable nosepiece & inner foam for a custom seal

ARMOUR Disposable Respirator Valve - P2 Charcoal Mask#DRP2VCBox: 12Carton 20AS/NZS 1716:2012

• Active carbon filter layer resists acid vapors - H2S, SO2, H2, N2 and micro dust• Silicon exhalation valve• Low breathing resistance• Special 4-Ply pleated high filtration and anti-static material• Double elastic straps • Adjustable nosepiece & inner foam for a custom seal

EAR, HEAD AND FACE PROTECTION


Respiratory

Hard Hat - Vented#TA570Colour: W/FY/OPack: 1Carton: 20

Chin Straps for Helmets#TA175Pack: 1Carton 20

• Lightweight ABS plastic • Internal web suspension • Fully adjustable headsize• Fits 3M H7P3E earmuffs• Can be printed

• Vented

• Fits all hard hats

Hard Hat - Unvented#TA560Colour: W/FY/OPack: 1Carton: 20

Sweat Bands for Helmets#TA094Pack: 1Carton 20

• Protection from sweat drips• Absorbent & comfortable • Easy snap install• Helmets fit better• Machine washable

ARMOUR Ear Plugs - Uncorded- Class 5#EARPLUGS200Box: 200Carton: 10 boxesAS/NZS 1270:2002:

ARMOUR Ear Plugs - Corded- Class 5#EARPLUGC100Box: 100Carton: 10 boxesAS/NZS 1270:2002:

• Disposable Class 5 Earplugs• Bullet design, easy application• Fluro orange for high visibility• Hearing protection for noise levels up to 110 dB(A) • Pairs in individual poly bags

• Disposable Class 5 Earplugs• Bullet design, easy application• Corded for handy reuse• Fluro orange for high visibility• Hearing protection for noise levels up to 110 dB(A) • Pairs in individual poly bags

ARMOUR Faceshield & Browguard Kit – High Impact#HPFSKITHIPack: 1Carton 20

• Compact lightweight • Adjustable headgear• 1mm thick impact resistant ABS plastic faceshield• Clear or smoke faceshields

ARMOUR Faceshield & Browguard Kit– Medium Impact#HPFSKITMI Pack: 1Carton 20

ARMOUR Faceshield to fit HPFSKITHI– High Impact#HPFSHICPack: 1Carton 20

• Polycarbonate faceshield• Clear or Smoke

PC 8” x 15.5” PolycarbonateCE, ANSI & AS/NZS Certified

• Polycarbonate visor• Clear or Smoke

PC 8” x 15.5” PolycarbonateCE, ANSI & AS/NZS Certified

ARMOUR Faceshield to fit HPFSKITMI– Medium Impact#HPFSMIC#HPFSMISPack: 1Carton 20

• Compact lightweight • Economical set• Adjustable headgear• Impact resistant ABS plastic • Clear or smoke faceshields

ARMOUR Browguard #HPFSBPack: 1Carton 40

• Suitable for ARMOUR faceshields• Browguard only

ARMOUR Clip On Earmuff - Class 5#EARCLIPONPack: 1Carton 20

AS/NZS 1270:2002 certified

• Clip on to safety helmets• Large ear cups • Foam filled cushions provide a good seal & all day comfort

Armourwear Earmuff - Class 5#EARARMBANDColour: Hi Vis YellowPack: 1Carton: 20AS/NZS 1270:2002 certified

• Strong plastic frame• Comfortable padding• Adjustable earcups• SLC 26dB

Hea

d Pr

otec

tion


SAFETY GLASSES

ARMOUR Safety Glasses - Clear#EYECLEARColour: CLEAR LENSPack: 12Carton: 120

ARMOUR Safety Glasses - Amber#EYEAMBERColour: AMBER LENSPack: 12Carton: 120

ARMOUR Safety Glasses - Smoke #EYESMOKE Colour: SMOKE LENSPack: 12Carton: 120

• Medium impact lens

• Anti-scratch, anti-fog

• 99.9% UV protection

• High Impact temples

• AS/NZS1337 approved

ARMOUR Sentry Close-fit Smoke##EYESENTRYSColour: SMOKE LENSPack: 12Carton: 300

• Medium impact polycarbonate lens

• Anti-scratch, anti-fog

• 99.9% UV protection

• Soft touch TPR nose pads

• 5 way adjustable arms

• AS/NZS1337:2010 approved

ARMOUR Sentry Close-fit Clear#EYESENTRYCLColour: CLEAR LENSPack: 12Carton: 300

ARMOUR Visitor Safety Overglass - Clear#EYEVIS Colour: CLEAR LENSPack: 12Carton: 120

ARMOUR Anti Fog Safety Goggles - Clear#EYEGOGGLELens Colour: CLEARPack: 12Carton: 120

• Lightweight ABS plastic

• Internal web suspension

• Variety of colours

• Fits all heads

• Can be branded

• Vented or Non Vented

ARMOUR Sentry Close-fit Reader#EYESENTRYRColour: CLEAR 1.0 / 1.5 / 2.0 / 2.5 POWER LENSPack: 12Carton: 300

• Lightweight polycarbonate reading lens 1.0 / 1.5 / 2.0 / 2.5 optical powered lenses available


WELDING APPAREL

All Armour Safety Welding Products are made from the highest quality chrome split leather and stitched with kevlar thread

stitched

stitched

Welding Apparel

Leather Welding Jacket#WPJACKSize: M - 7XLPack: 1Carton 10

• Generously sized • 8 double row fastening press studs• Deep internal pocket • External press stud closing pocket

• Premium leather trousers• Adjustable webbing belt• Snap-on buckle• Seatless backing for extra comfort• Generous sizings

• 100% flame retardant • Heavy Duty 280GSM cotton drill fabric• Preshrunk anti-static• Kevlar stitched

• Measuring 1.8 x 1.8m• 12 heavy duty metal reinforced holes• Made from 6 pieces of leather• Double kevlar stitched

Leather Welding Pants#WPPANTSize: XLPack: 1Carton 10

Flame Retardant Hood#WPFRBHOODPack: 1Carton 20

Flame Retardant Jacket#WPFRBLSJSize: S - 3XLPack: 1Carton 10

Leather Welding Blanket#WPBLANKSize: 1800 x 1800 mmPack: 1Carton 5

EN ISO 11611:2015EN ISO 11612:2015

• 100% flame retardant • 280 GSM cotton drill fabric• Preshrunk anti-static• Premium split leather sleeves• Kevlar stitched• Premium anti-rust metal stud buttons

Leather Welding Sleeves#WPSLEEVESPack: 1Carton 10

• Made from 2 pieces of leather• Double kevlar stitched• Strap/buckle attachments across your back• Generous sizing

Leather Welding Apron - 90cm x 60cm#WPAPRONPack: 1Carton 20

• Basic apron 90cm x 60cm• Chest Pocket• Adjustable webbing straps & plastic buckle

• Premium 102cm x 62cm• Leather straps and double leather patch on front for long life.

Leather Welding Apron With Patch - 102cm x 62cm#WPAPRONPATPack: 1Carton 20

Flame Retardant JacketDay/Night#WPFRTTMCWJSize: S - 3XLPack: 1Carton 10

• Quality TTMC compliant • 100% flame retardant • 280 GSM cotton drill fabric• Preshrunk anti-static• Kevlar stitched• Scotchbrite reflective tape• Premium anti-rust metal stud buttons• left chest inside pocket

Leather Welding Spats#WPBOOTCPack: 1Carton 10

• Leather velcro under boot strap• 2 thick leather velcro straps on the back• 5cm elastic for snug fit at top of spat • Straps secured by bronze studs

• Designed for the Glass production and supply industry• Reinforced forearm for cut protection• Provides support for heavy weight• Velcro binding for comfort

• Made from 4 pieces of leather • 23cm long nape to fully cover the back of your neck

Leather Welding Skull Cap#WPSKULLPack: 1Carton 10

Leather Welding Armguard- reinforced inserts#WPARMGUARDPack: 1Carton 20


Appa

rel

VESTS & RAINSETS

Hi Vis 210 Orange RainsetJacket & Pants - TTMC-W17#HVODNRS Colour: ORANGECoating: PVC COATINGSize: S - 7XLPack: 1Carton: 20

HiVis TTMC-W17 Day/Night Vest#HVODNZVX with X tape on back#HVODNZV Colour: ORANGECoating: UVSize: S - 7XLPack: 1Carton: 50

HiVis TTMC-W17 Long Sleeve Day/Night Vest#HVODNLSColour: ORANGECoating: UVSize: S - 7XLPack: 1Carton: 25

HiVis Yellow Day/Night Vest#HVYDNZVColour: YELLOWCoating: UVSize: S - 7XLPack: 1Carton: 25

• Tough 210 D polyester oxford PVC coating• Water Head Rating 3,000mm/m2/24hr• Tape and heat sealed seams• Underarm vents and ventilated cape back• Two lower pockets with flaps• Snaps on leg hem for snug fit

AS/NZS 4602.1:2011 AS/NZS 1906.4:2010. for Day/Night Use.

• Top quality TTMC-W17 compliant • Lightweight polyester, strong and easily washable. • Strong zip front, long tail• Mobile phone pocket with velcro flap pen pocket, large internal pocket• Clear pocket for onsite identification

AS/NZS 4602.1:2011AS/NZS 1906.4:2010. for Day/Night Use.

• Top quality TTMC-W17 compliant • Lightweight polyester, strong and easily washable• Long sleeves provide UV and dirt protection• Clear pocket for onsite identification• Velcro strap on sleeve cuff for firm fit

AS/NZS 4602.1:2011AS/NZS 1906.4:2010. for Day/Night Use

• Lightweight polyester, strong and easily washable. • Strong zip front, long tail• Mobile phone pocket with velcro flap pen pocket, large internal pocket• Clear pocket for onsite identification

AS/NZS 4602.1:2011 for garment design AS/NZS 1906.4:2010 for fabric and reflective tape

FREEZER WEAR

ICEKING ARCTIC Freezer Gauntlet#IKFGSize: M - 2XLPack: 6Carton: 48

• Suitable for temperatures to -40°C • 300D Oxford polyester outer shell• Waterproof rated to 2000mm/m2/24hr• 150D polyester internal coated lining• Latest ‘Arctic’ thermal insulation technology • Neoprene hand inserts in arm cuff• Multiple pockets on inside, chest, arm, pouch and front of garment• Velcro closures on all external storage pockets• Lined collar and Velcro closure • Anti-rot thread & double stitched seams• No.10 nylon zipper for easy use and freeze resistance • Large gusseted glove pockets• Internal hanging loop for storage• Internal phone pocket

• Suitable for temperatures to -40°C • 300D Oxford Rip Stop outer shell• Breathable fabric• 150D polyester internal coated lining• Latest ‘Arctic’ thermal insulation technology • Neoprene hand inserts in arm cuff• Multiple pockets on inside, chest, arm, pouch and front of garment• Velcro closures on all external storage pockets• Lined collar and Velcro closure • Anti-rot thread & double stitched seams• No.10 nylon zipper for easy use and freeze resistance • Large gusseted glove pockets• Internal hanging loop for storage• Internal phone pocket

• Bib pant ankle sleeve with velcro closure to eliminate air movement and retain warmth • Elasticated internal waist adjuster

• Bib pant ankle sleeve with velcro closure to eliminate air movement and retain warmth • Elasticated internal waist adjuster

• Suitable for temperatures to -40°C• Hi Vis shell with reflective piping• Waterproof and breathable liner• 3M Thinsulate lining for advanced thermal protection• High abrasion Synthetic leather grip palm• Reinforced patches on palm and fingertips• Extended gauntlet with clinch draw string• Excellent dexterity & comfort• Sweat wipe on thumb

ICEKING ARCTIC Freezer Jacket#FGIKJColour: YELLOW/NAVYCoating: PU MEMBRANESize: S - 6XLPack: 1Carton: 5AS/NZS 4602.1:2011EN14058:2004 protection against cold environments

ICEKING ARCTIC Freezer Jacket#FGIKONJColour: ORANGE/NAVYCoating: PU MEMBRANESize: S - 6XLPack: 1Carton: 5AS/NZS 4602.1:2011EN14058:2004 protection against cold environments

ICEKING ARCTIC Freezer Bib Pants#FGIKBP

ICEKING ARCTIC Freezer Bib Pants#FGIKONBP

BLADE Thermal Nitrile Glove#BLC5FNTSize: S - 2XLPack: 12Carton: 60

• Lightweight 10 guage thermal acrylic inner liner technology performs to -20º• External liner, the latest in Cut 5 protection• Double dipped full coating provides superior liquid protection against water and oils• Excellent soft fit for dexterity, flexibility and grip

ICEKING CHILLER Glove#IKCGSize: M - 2XLPack: 12Carton: 60

• 13 gauge acrylic liner for flexibility and dexterity minimising hand fatigue• Latex sandy finish palm for grip in wet and dry environments• Seamless shell with brushed acrylic lining• Performs to -10°C

Prot

ecti

ve C

loth

ing


COVERALLS / APRONS

Disposable Splashproof Coveralls#DOCOSPColour: WHITE / ORANGEWeight: 60GSMSize: M - 3XL / 5XLPack: 1Carton: 20

Disposable Polyethelene Aprons#DOAPRONW - WHITE #DOAPRONB - BLUEWeight: 60GSMSize: 1350 x 750 mmPack: 100Carton: 1000

PVC Standard Apron#CLAPRONPVCWColour: WHITEPack: 1Carton:

PVC Heavy Duty Apron#CLAPRONPVCWHD - WHITE#CLAPRONPVCGHD - GREEN#CLAPRONPVCBHD - BLACKPack: 1

• 60gsm breathable Polyethelene film• Category 3 coverall (Type 4,5 & 6 protection) • Extensive armpit & crotch stitching for superior durability• Non-toxic splashes, sprays & micro particle protection• Elasticated hood, wrists & ankles• Wrists feature thumb loops to secure sleeve position during overhead work• Full body zipper• Zero lint for sterile working environments

• Lightweight polyethylene• 1 piece goes over head then tied at back• 25 microns thick

• Standard (white only) apron• Adjustable bungy cord for neck• Bungy cord/hook for the back• 0.3 microns thick

• Heavy duty PVC for long life and maximum protection• Easily cleaned• Adjustable bungy cord for the neck, • Adjustable bungy cord/hook for the back• Good for meatworks• 0.42 microns thick


PVC Sleeves#CLSLPVCWColour: CLEAR / WHITESize: 35CMCarton: 100

• 350mm sleeve• Heavy duty PVC• Elasticated either end to hold it in place

Disposable Bouffant Caps#DOHATColour: WHITESize: 21” & 24”Pack: 100Carton: 1000

Disposable Balaclavas#DOBALACLAVAColour: WHITEPack: 50Carton: 250

Back Support - Adjustable #CLBACKSColour: BLACKSize: S - 2XLPack: 1Carton: 10

Disposable Shoe Cover#DOSHOECOVColour: BLUEPack: 1000

Disposable Gumboot Cover#DOWHGBCOVColour: WHITECarton: 100 PAIR

• Non woven polypropylene• Single elastic band to hold in place• Size: 54cm / 21”

• Full head cover for: - warmth, containment and cleanliness• Non woven polypropylene• Covers mouth and bottom of nose.

• Fully washable. • Breathable spandex backed with rubber grip webbing • Polyethylene plastic stays provide support and strength.• Comes together at the front with velcro• Adjusted for comfort. • Comes with detachable suspenders

• Non-woven polypropylene• One size fits most shoes• Ambidextrous• Non-skid latex pattern reduces risk of slipping.

• Heavy-duty double-soled reinforced boot covers• Strong construction to survive a boot wash machine or rigorous manual washing• Heavy elastic calf closure with material tie above ankle for snug, secure fitting

Disposable PE Sleeve Covers#DOWHSLEEVEColour: WHITESize: 40CMCarton: 1000

• FDA Approved• 400mm sleeve• Good for food processing, medical, & manufacturing sectors

HEADWEAR / BACK SUPPORT/ SHOE COVER / SLEEVES

Protective Clothing

SAFETY BOOTS

• No.8 enduro full grain leather upper• Steel toe cap• Padded top line• Triple stitched seams at high stress points• Shock absorbing innersole• Low profile bump cap• Anti slip sole. Anti penetration midsole

• No.8 enduro full grain leather upper• Wide form steel toe cap for toe freedom• Triple stitched at high stress points• Samson wide fit sole for greater comfort & stability• Low profile TPU scuff protection• Comfort innersole for relief on hard surfaces

NO.8 Rutherford Lace Up Safety Boot #BOOTLRUColour: BLACKSize: 3 -13CERTIFIED TO: AS/NZS 2210:3:2009

NO.8 Marsden Slip On Safety Boot #BOOTSColour: BLACKSize: 3 -13

Foot

wea

r


ARMOUR - Non Safety Lace Up#BOSHOEJOGG Colour: BLACKSize: 3 -13

BATA - Safemate Steel Toe Gumboot - Black#BOGUMBLColour: BLACK UPPER YELLOW SOLESize: 4 - 14CERTIFIED TO: AS/NZS 2210:3:2009

- White#BOGUMWHColour: WHITE UPPER YELLOW SOLESize: 4 - 14CERTIFIED TO: AS/NZS 2210:3:2009

• Tunnel system • Steel toe cap • Oil/acid resistant sole• Slip resistant sole

JOHNBULL Angus Lace Up #BOOTLAN Colour: BLACKSize: 5 -13CERTIFIED TO: STANDARD AS/NZS 2210.3:2009CLASSIFICATION 1—ID:2815COMPLIES TO: ASTM F2413-05 ELECTRICAL RESISTANCE

BATA - Hercules Slip On Boot #BOOTSHER

Colour: BLACKSize: 3 -13CERTIFIED TO: AS/NZS 2210.3

BATA - Neptune Safety Shoe#BOSHOENT

• Cossack heat moulded heel counter• Dual density polyurethane sole• 5mm deep tread expels foreign materials - resists clogging oil, acid & organic fat resistant - outsole heat resistant to 140˚C.

• Elastic side V cut• Moulded bump guard• Dual density polyurethane sole• 5mm deep tread expels foreign materials - resists clogging oil, acid & organic fat resistant - outsole heat resistant to 140˚C

JOHNBULL Brahman Slip On#BOOTSBRAHMANColour: BLACKSize: 5 -13CERTIFIED TO: STANDARD AS/NZS 2210.3:2009CLASSIFICATION 1—ID:2815COMPLIES TO: ASTM F2413-11 ELECTRICAL RESISTANCE

• Steel toecap -200J • PU footbed, Tunnel System• Anti-static, energy absorption, • Fuel oil & heat resistant outsoleSuitable for Industry, Automotive, Logistics, Manufacturing

• Black Leather upper• Dual Density PU outsole• Anti-static Tunnel System• Slip Resistant

CERTIFIED TO: AS/NZS 2210:3:2009

NON STEEL TOE CERTIFIED TO: AS/NAS 2010:5:2009


Traffic

TRAFFIC

Cone TopperYellow/Black #TMCTYB9MRed/White #TMCTRW9M 9 MetrePack: 1Carton: 10

Safety Mesh Standard / Heavy dutySTD #TMSSM501m high x 50m rollHD #TMHDSM301m high x 30m rollPack: 1Carton: 10

Universal Cone6KG #TMUC6KG4.5KG #TMUC4.5KG900mmPack: 1Carton: 10

Cone Arms Yellow / Black#TMCA2.2 Pack: 1Carton: 10

Pop Up Cones / with flashlight#TMPUC450450mm #TMPUC700 / 900With light 700mm / 900mmPack: 1Carton: 10

Service Tape Sewer / Water / ElectricalCaution / Danger200m long x 70mm widePack: 1Carton: 10

Speed Hump 50mm Mid Section – Heavy DutyYELLOW #TMSHY50MM BLACK #TMSHB50MM500mm L x400 W x 50 H, 8kgs• High quality rubber construction• Built-in reflective beads for added visibility• Easy installation

Wheel Stop 1.8m wide 2 piece#TMYBWS1.8M1800mm L x 150 W x 100 H,16kg• High quality black rubber construction with yellow reflective• Protects vehicles, walls, glass frontage etc from damage• Easy one person installation• Extremely durable

End Cap – Heavy DutyYELLOW #TMSHYEC BLACK #TMSHBEC170 L x 400 W x 50 H, 2.5kgs

Suitable for low to high volume and impact vehicles.

DynaboltsSpeed Hump: 75mm L x 12mm W# TMDB75MMWheel Stop: 150mm L x 12mm W# TMDB150MM

Dynabolts are suitable for assured fixing of Speed Humps and Wheel Stops to concrete.

The cone topper is perfect for creating a long and cost effective delineation or barrier. At 9 meters long and with a high quality red and white band it is very visible and easy to use. Use the cone topper to cordon off areas and create a safety barrier.

This cone is unique in that it can fit the majority of wide bodied cones in the NZ market. No longer are your wide bodied cones going to get stuck.

• Weighted base• Built in flashing light• Compact

• 0.5kg• Reflective yellow sheeting• Heavy Duty PVC• Super strong loops

Fluorescent orange plastic safety mesh can be used as a temporary safety fence as a warning barrier and marking restricted access control areas.

Sewer Line Below#TMSTSLB

Danger#TMD

Pack: 1Carton: 10

Pack: 2

• Retractable extends from 1.3m – 2.2m

Road Spikes#TRMS160MM160mm L x 12mm W

Spikes are suitable for asphalt to secure your Speed Humps and Wheel Stops.

Bunting flags#TMBFO32M 32m in lengthPack: 1Carton: 10The bright orange bunting flags provide excellent visibilty for any hazard areas.

Water Mains#TMWM

Electrical CableTMEC

Caution#TMC


RETRACTABLE KNIVESCONCEALED CUTTERS

Safe

ty c

utte

rs

DIPLOMAT Budget Cutter #SDA38Box: 60

DIPLOMAT Box Cutter #SDA35Box: 24

• Economical safety knife • No tools required• Available in left handed • Replacement blades - A33BLADES) Tube of 10

• Die cast metal body• High quality blade• Limited blade protrusion• Fits A35BLADES

DIPLOMAT Spring Loaded Budget Cutter#SDA53Pack: 12

DIPLOMAT Auto Return Metal Knife#SDA54 Box: 12

DIPLOMAT Auto Retractable Knife#SDA59 Box: 12

DIPLOMAT Auto Retractable Heavy Duty Metal Knife#SDA58 Pack: 6

• Spring loaded, side slide retracting with metal insert • Rubber grip.• Left or right hand users • Easy to change blade• No tools required.

• Auto return knife• Rubber grip• Die-cast alloy handle • Left or right hand users • Heavy/standard duty utility blades

• Blade auto retracts even when thumb is still on the blade slider. • Left or right hand users• Lightweight, ergonomic rubber grip.

• Dual-action safety knife• Blade safely retracts even when the finger is left on the blade slider. • Heavy duty metal handle with rubber grip• Easy to change blade, no tools required

DIPLOMAT Creamic Blade Slice Cutter#SDSLICE-SC Pack: 48

DIPLOMAT Ceramic Precision Cutter#SDSLICE-PCPack: 48

KLEVER Kutter Concealed Blade Cutter#SKKLKUTTERPack: 100

KLEVER Koncept Concealed Blade Cutter#SKKLKONCEPT Pack: 50

KLEVER Excel Concealed Blade With DX Head#SKKLEXCELPack: 50

• Finger-friendly microscopic ceramic blade • Good for clipping, removing shrink-wrap, thin film, opening clamshell plastic packaging, paper, paper rolls, and more

• Safer than craft knives• Ideal for intricate shapes• Ceramic blade stays sharp and never rusts

• Stainless Steel 0.15mm blades• Light & easy to hold

• Prevents damage to product

• Disposable model.

• Reversed blade prevents contact with fingers.

• Recessed blade prevents contact with fingers • Large blade opening • Won’t damage goods• Good for cardboard, boxes, strapping, shrink & bubble wrap• Lightweight-weighs 15 grams.

• Recessed blade prevents accidental contact• Large blade opening • Won’t damage goods• Lightweight• Soft touch handle with tape slitter. Cuts plastics and card• Made in the USA, with high quality German blade.

DIPLOMAT Heavy Duty Metal Film Slitter#SDA45 Box: 12

• For woven sacks, multi-wall-bags, strapping, plastic wraps, leather, fabrics, & taped boxes• Non-slip rubber grip handle

CUTSAFE Kingfisher Concealed Blade Cutter#SKKINGFISHERPack: 100

• Metal detectable • Safely cut shrink & bubble wrapped pallets, box strapping, plastic sheeting and taped boxes.

FIRST AID KITS

For a full list of the contents of all of these First Aid Kits see www.ARMOURsafety.co.nz

First Aid 2 Person - soft bag#FALW2Pack: 1

First Aid 1-5 Person - wall mounted#FA15WMPack: 1

First Aid 1-25 person - wall mounted#FA125WMPack: 1

A step up from the basic kit. Made with the tradesman in mind.

More comprehensive kit in hard plastic box designed to be kept at the workplace to provide first aid for most events.

Complete First Aid Kit in hard plastic case that is wall mountable.

First Aid 1 Person - soft bag#FALW1Pack: 1

First Aid 1-5 Person - soft bag#FA15SBPack: 1

First Aid 1-25 Person - soft bag#FA125SB Pack: 1

Ideal for people on their own. Compact, yet with the essentials. Great for the car

Compact kit ideal for work crews where only 1 kit is required for a group of workers

All the basics for a larger workforce in a soft canvas bag. Great Value.

First Aid 1-50 Person - metal cabinet#FA150WMPack: 1

Complete First Aid Kit in hard plastic case that is wall mountable


Firs

t Aid

Kit

s

Documents

2019 · 2019. 7. 14. · Armour Safety within 7 days of delivery. • All approved product returns are subject to a restocking fee of 10%. • Where applicable, all Armour Safety