300 Bailey Avenue • Fort Worth, TX 76107 • 800-537-7683 • Fax: 800-228-1143 • www.le-inc.com LI30028 04-06 PHYSICAL CHARACTERISTICS - TYPICAL: 3750 3751 3752 NLGI Grade 0 1 2 Worked Penetration @ 77ºF (25ºC) 355-385 310-340 265-295 Color Red Red Red Texture Smooth w/Tack Smooth w/Tack Smooth w/Tack Base Thickener Lithium Complex Lithium Complex Lithium Complex Dropping Point ºF (ºC) 425 (218) 500 (260) 540 (282) Base Oil: Viscosity, SUS @ 100ºF 665 665 665 SUS @ 210ºF 66.2 66.2 66.2 cSt @ 40ºC 144 144 144 cSt @ 100ºC 11.7 11.7 11.7 PERFORMANCE TEST REQUIRMENTS Timken OK Load lbs., ASTM D-2509 70 70 70 Oxidation, psi drop, ASTM D-942 In 100 hours 5 5 5 In 1,000 hours — — 30 Rust Test, ASTM D-1743 With Distilled Water Pass Pass Pass With Synthetic Sea Water Pass Pass Pass Resistance to Water Spray, ASTM D-4049, % Loss — — 20 max. Roll Stability, %, ASTM D-1831 — 5 — Water Washout, %, ASTM D-1264 — — 1.6 SPECIFICATIONS EXCEEDED Mack MG-C (3752) Stord Rotadisc-Driers (3752) USDA H2 SWECO-Vibro Equipment (3752) RECOMMENDATION 3752 should not be used in high-speed (over 3,000 rpm) anti-friction bearings. 3751 should not be used in high-speed (over 6,000 rpm) anti-friction bearings. 3750-3752 ALMAGARD ® Vari-Purpose Gear Lubricant Technical Data

3750-3752 ALMAGARD Vari-Purpose Gear Lubricant Technical

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: 3750-3752 ALMAGARD Vari-Purpose Gear Lubricant Technical

300 Bailey Avenue • Fort Worth, TX 76107 • 800-537-7683 • Fax: 800-228-1143 • www.le-inc.com LI3002804-06

PHYSICAL CHARACTERISTICS - TYPICAL: 3750 3751 3752NLGI Grade 0 1 2Worked Penetration @ 77ºF (25ºC) 355-385 310-340 265-295Color Red Red RedTexture Smooth w/Tack Smooth w/Tack Smooth w/TackBase Thickener Lithium Complex Lithium Complex Lithium ComplexDropping Point ºF (ºC) 425 (218) 500 (260) 540 (282)Base Oil: Viscosity, SUS @ 100ºF 665 665 665 SUS @ 210ºF 66.2 66.2 66.2 cSt @ 40ºC 144 144 144 cSt @ 100ºC 11.7 11.7 11.7

PERFORMANCE TEST REQUIRMENTS Timken OK Load lbs., ASTM D-2509 70 70 70 Oxidation, psi drop, ASTM D-942 In 100 hours 5 5 5 In 1,000 hours — — 30 Rust Test, ASTM D-1743 With Distilled Water Pass Pass Pass With Synthetic Sea Water Pass Pass Pass Resistance to Water Spray, ASTM D-4049, % Loss — — 20 max. Roll Stability, %, ASTM D-1831 — 5 — Water Washout, %, ASTM D-1264 — — 1.6

SPECIFICATIONS EXCEEDED Mack MG-C (3752) Stord Rotadisc-Driers (3752) USDA H2 SWECO-Vibro Equipment (3752)

RECOMMENDATION 3752 should not be used in high-speed (over 3,000 rpm) anti-friction bearings. 3751 should not be used in high-speed (over 6,000 rpm) anti-friction bearings.

3750-3752 ALMAGARD® Vari-Purpose Gear Lubricant Technical Data