Steep Taper Tool Changer Alignment Gauges 440.800 11-1025 / Page 1 of 1 Uncontrolled Document The tool changer alignment gauge is used to check automatic tool changer positioning between the gripper arm, magazine, and the spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, mis-clamping and dropped tools can also occur. The gauge checks axial alignment using pin (1). Taper Order Number Steep Taper 30 (BT) Tool Changer Alignment Gauge 440.135.730.000 Steep Taper 40 (BT) Tool Changer Alignment Gauge 440.135.740.000 Steep Taper 50 (BT) Tool Changer Alignment Gauge 440.135.750.000 Steep Taper 30 (DIN) Tool Changer Alignment Gauge 440.135.830.000 Steep Taper 40 (DIN) Tool Changer Alignment Gauge 440.135.840.000 Steep Taper 50 (DIN) Tool Changer Alignment Gauge 440.135.850.000 Steep Taper 60 (DIN) Tool Changer Alignment Gauge 440.135.860.000 Steep Taper 30 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.930.000 Steep Taper 40 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.940.000 Steep Taper 50 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.950.000 Steep Taper 60 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.960.000 Preventive Maintenance Gauges Dimensional Gauges, Balancing Masters, Coolant Supply Gauges, Center Height/Master Setting, Tool Changer Alignment Gauges, Machine Set-up Gauges. Also ask us about custom gauges and personalized solutions for your machine or machine tool. Chuck Force Gauges Measure chuck jaw clamping force at high speeds. Also available for other chuck measuring applications. Custom Machine Tool Gauges Runout Test Arbors Available for all major machine tapers, including CAT/DIN/BT Steep Taper, HSK, Capto, KM, Morse, and others. Drawbar Force Gauges Measure tool clamping force to protect spindles and ensure machining accuracy. Any gauge for any machine or machine tool. Also available for HSK and Capto. 109 North Main Street · Rockford, IL 61101 USA Tel. 815 962-5600 · Fax 815 962-4600 www.TACRockford.com · [email protected]

440800 Steep Taper Tool Changer Alignment Gauges

Download PDF Report

Upload
guillermo-ramirez
View
24
Download
2

Embed Size (px)

Citation preview

Page 1: 440800 Steep Taper Tool Changer Alignment Gauges

Steep Taper Tool Changer Alignment Gauges 440.800 11-1025 / Page 1 of 1

Uncontrolled Document

The tool changer alignment gauge is used to check automatic tool changer positioning between the gripper arm,magazine, and the spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer,and tool holder. In addition, mis-clamping and dropped tools can also occur.

The gauge checks axial alignment using pin (1).

Taper Order NumberSteep Taper 30 (BT) Tool Changer Alignment Gauge 440.135.730.000Steep Taper 40 (BT) Tool Changer Alignment Gauge 440.135.740.000Steep Taper 50 (BT) Tool Changer Alignment Gauge 440.135.750.000Steep Taper 30 (DIN) Tool Changer Alignment Gauge 440.135.830.000Steep Taper 40 (DIN) Tool Changer Alignment Gauge 440.135.840.000Steep Taper 50 (DIN) Tool Changer Alignment Gauge 440.135.850.000Steep Taper 60 (DIN) Tool Changer Alignment Gauge 440.135.860.000Steep Taper 30 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.930.000Steep Taper 40 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.940.000Steep Taper 50 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.950.000Steep Taper 60 (CAT/ANSI) Tool Changer Alignment Gauge 440.135.960.000

Preventive Maintenance GaugesDimensional Gauges, Balancing Masters, Coolant Supply Gauges, Center Height/Master Setting, Tool Changer AlignmentGauges, Machine Set-up Gauges. Also ask us about custom gauges and personalized solutions for your machine or machine tool.

Chuck Force GaugesMeasure chuck jaw clamping force at high speeds. Also available for other chuck measuring applications.

Custom Machine Tool Gauges

RunoutTestArborsAvailable for all major machine tapers, including CAT/DIN/BT Steep Taper, HSK, Capto, KM, Morse, and others.

Drawbar Force GaugesMeasure tool clamping force to protect spindles and ensure machining accuracy.

Any gauge for any machine or machine tool.

Also available for HSK and Capto.

109 North Main Street · Rockford, IL 61101 USATel. 815 962-5600 · Fax 815 962-4600

www.TACRockford.com · [email protected]

http://www.TACRockford.com/datasheets/440.135.730.000/

http://www.TACRockford.com/datasheets/440.135.740.000/

http://www.TACRockford.com/datasheets/440.135.750.000/

http://www.TACRockford.com/datasheets/440.135.830.000/