Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
QS-02/17 Kocsis QST-in-Depth Page 1
A Panadapter for Your Transceiver or Receiver
QST in Depth supplementary informstion
Jim Kocsis, WA9PYH
Images courtesy of Jim Kocsis, WA9PYH.
Images for the PC configuration.
Figure Q1 – The PC configuration shows the upconverter on left, USB-A to USB-B
cable along top, and SDR at lower right.
QS-02/17 Kocsis QST-in-Depth Page 2
Figure Q2 – HDSDR software at 7050 kHz center frequency, 30 kHz on right is a CW
pileup, 30 kHz on left are PSK signals.
QS-02/17 Kocsis QST-in-Depth Page 3
Figure Q3 – HDSDR software showing 100 kHz on either side of the 7150 kHz center
frequency.
QS-02/17 Kocsis QST-in-Depth Page 4
Figure Q4 – HDSDR showing AM broadcast band signal, zoomed in to show the
symmetrical sidebands.
QS-02/17 Kocsis QST-in-Depth Page 5
Images for the Tablet configuration.
Figure Q5 – Upconverter, SDR, Powered USB Hub with power supply, OTG adapter.
The Tab 3 10-inch tablet is on the top.
QS-02/17 Kocsis QST-in-Depth Page 6
Figure Q6 – SDRTouch running on tablet, SSB signals on left, CW signals on right. The
display center is the center of the 9 MHz IF.
QS-02/17 Kocsis QST-in-Depth Page 7
Images for the Smartphone configuration.
Figure Q7 – Upconverter, USB-A to USB-B cable, SDR, 5 V 2 A charger, 4 Port Micro
USB hub, and S4 smartphone.
QS-02/17 Kocsis QST-in-Depth Page 8
Figure Q8 – SDRTouch running on S4 smartphone shows SSB signal on the 40 m
band displayed on the 9 MHz IF.
QS-02/17 Kocsis QST-in-Depth Page 9
Additional images
Figure Q9 – Homebrew charger cable assembly, USB-Female connector, 5 V 2 A
charger, and micro USB breakout board in the center.
QS-02/17 Kocsis QST-in-Depth Page 10
Figure Q10 – Two SDRs, upper with adapter and cable from whip antenna, lower with
adapter to BNC.
QS-02/17 Kocsis QST-in-Depth Page 11
Figure Q11 – OTG cable, upper left; USB-A to USB-B, right; 4 port Micro USB OTG
Charger Hubb bottom center.
QS-02/17 Kocsis QST-in-Depth Page 13
Parts List
Description Part Number Price Source Notes
SDR dongle NooElec R820T $23 Ebay misc other manufacturers upconverter NooElec 125 MHz $46 Ebay USB A male to USB B male cable, 3 foot
$3 Amazon, Ebay generic part
OTG cable $3 Amazon, Ebay generic part USB Micro B plug break out board
BOB-10031 or RB-Spa-1088
$4 Robot Shop www.robotshop.com
USB Powered Hub and AC adapter
$7 Amazon, Ebay Avyzar and many other brands
SMA male to MCX adaptor
$5 Amazon, Ebay depends on connector on SDR
4 port USB OTG & Charger
product ID 975460 $11 Banggood Electronics
misc RF connectors
73,
Jim Kocsis, WA9PYH
email: [email protected].
Note: The required interface board for nearly any transceiver is available from http://huprf.com/huprf/orders-prices
Scroll down to "panoramic adapter tap board", then click on "which PAT.” Assembled boards cost $15 US from G4HUP. (The TenTec Eagle radio already provides this tap.) If the SR dongle is attached directly to a point without an isolator (buffer), the SDR dongle would load down the IF too much and reception would suffer.
The app for your Android device is called "RF Analyzer" on the Google play store and costs $1.01.