8/7/2019 AMAVSAT--INSTALLATION-OLD

1/6

STEP BY STEP PROCEDURE TO FACTORY RESET THEIRD VSAT BOX (SNA 4400)

AND CONFIGURING NEW AMA VSAT FREQUENCY

General Procedures :1. Reset IRD unit (factory reset)2. Reboot and default data will be loaded3. Access TP (transponder data) data and delete other TP entries.4. Add AMA Channel Frequency (TP data) and S/R (Symbol rate data)5. Save new settings6. Delete other channels

7. Test new channel settings - view live broadcast.

MABUHAY SATELLITE will upgrade on JUNE 14, 2008 at exactly 10:00 am. All live broadcast usingold frequency will be cut-off.

To check if your new IRD configuration is successful, tune in to AMACHANNEL at exactly 10:30AM

(June 14) and you must see the AMA Video commercials being broadcast live.

After successful configuration:

SMS or TEXT the following message to 09266307299

SMS FORMAT: VSAT SUCCESS < BRANCH>Ex. VSAT SUCESS AMA DAVAO

VSAT SUCESS ACLC BAGUIOView Online Status

TECHNICAL HELPDESK HOTLINE

AMA I.T.(02) 3722603 / (02) 3733901 local 8229

09063089357 (RONALD)

PACIFIC SATELITE(02) 5228201/0209176269224 (JULIE)

Set top box Unit- IRD DIGITAL WORLD

8/7/2019 AMAVSAT--INSTALLATION-OLD

2/6

NagraVision SNA 4400- Remote Control Unit

STEP 1

Turn ON the set top box - Integrated

Receiver Decoder (IRD)Use the Remote Control Unit (RCU) and

Press MENUSelect Installation menu and pressbutton.

FOR ADVANCED USER, GOTO STEP 5 & 8

WITHOUT FACTORY RESET.STEP 2

Select Factory Reset and

Press button

Enter access code 1234 using numeric button

After sucessful input of access code, selectOK (Factory reset )

and then press buttonSTEP 3

After pressing OK sequence display below will

be shown.

8/7/2019 AMAVSAT--INSTALLATION-OLD

3/6

STEP 4

Once the First Installation appears press OK

button

STEP 5

Under INSTALLATION -> CHANNELSEARCH->EQUIPMENT menu, select NONE

and press button

* Enter access code 1234 if CHANNELSEARCH is directly access without factoryreset.

STEP 6Channel Search will appear,

using LEFT/RIGHT button

select 1 and mark check by pressing

button as shown below

Select Manual by pressing buttonSTEP 7Default Transponders (TP) is now

8/7/2019 AMAVSAT--INSTALLATION-OLD

4/6

loaded.Delete transponders 1,2 and 3 bymarking each (CHECKMARK) . Select each

TP using UP/DOWN and press OKAfter Marking TP 1, 2 and 3 (w/ checkmark) ,

press button to delete .

If you cannot delete other TP, just select 1 TP

and edit the parameters

STEP 8

At this point only one TP data is displayedTP1. Edit TP 1 with the new AMA VSATParameters.press to mark TP 1 (w/ checkmark)and RIGHT button to go to FREQPress OK and Enter the AMA Frequency

12544 using numeric buttons and press OKbutton after entering the correct frequency.

STEP 9

Edit FREQ,S/R,POL and FEC value. Followstep 8 procedure.

AMA VSAT new parametersFREQ 12544

S/R 21428

POL V

FEC 5/6 or AUTO

STEP 10

With TP 1 marked check as shown below,

press button for Manual search** Ensure TP1 is with checkmark before

pressing

STEP 11

8/7/2019 AMAVSAT--INSTALLATION-OLD

5/6

Wait until 100% channel search is done.Press OK button.At this point , AMAChannel title is listed

STEP 12

After Manual Channel Search, Press OKbutton to save settings

STEP 13.

Press EXIT button and view/test newchannels.

STEP 14

8/7/2019 AMAVSAT--INSTALLATION-OLD

6/6

From Channel list, SELECT AMACHANNEL

and check the live broadcast.You can also check other TV channel underMABUHAY.1. UNIVERSITY2. MAXTV3. KARAOKETV