Audiolab - Full Line 2012

Based in Miami, United States, American Pro International Corporation is a mayor developer and designer of professional sound and lighting equipment.

Founded in 2002, AMPRO Int. Corp. is a diversified global enterprise that includes six mayors brands: NEO, AUDIOLAB, TECSHOW ALLTRUSS, XPRESSION & PIXELVISION.

Our main objetive is to supply the best tool to every entertainment professional.

Power Amplifiers1.1.1 DSP-10000

1.2 DSP-20000

1.3 DQX-7200 / DQX-14400

1.4 DA-2500 II / DA-4000 II

1.5 MH-7200 / MH-9400

03

04

05

06

07

DQ

X, D

SP, M

H &

DA

SERI

ES /

1.

PO

WER

AM

PLIF

IERS

AU

DIO

LAB

02

INTRO

DU

CING

AU

DIO

LAB / AM

ERICAN PRO

AU

DIO

LAB

01

Power supply: Advanced SMPS circuit and APFC design to provide a real globally applicable power supply with extremely high efficiency. Based on these two techno-logies, the power supply of the amplifier has major advantages: low harmonic wave, high efficiency, high power factors, etc.

Circuit protection: Short-circuit, over-voltage, under-voltage, temperature control, DC protection, peak clipping and amplitude limiting and VHF protection, as well as the automatic temperature control fan system.

New circuit topology: The more complete digital signals are obtained after music signals adopt the new modulation mode. This new modulation mode ensures sam-pling of some extremely small signals and enriches sampling modes. In addition, the fixed switch frequency is greatly reduced, which allows a power amplifier to produce less heat and greatly enhances its efficiency. At the same time, the static power consumption is also reduced by a wide margin.

DSP Processor: NEW DSP processor with network function: No-limites remote control.

DA-

2500

II, D

A-40

00 II

/

1. P

OW

ER A

MPL

IFIE

RSA

UD

IOLA

B1.1 PO

WER A

MPLIFIERS / DSP-10000

AU

DIO

LAB

DSP-10000 /

The DSP Series is the professional’s choice in digital amplifiers. Ideal for large venues and profesional use, the DSP Series obtains the highest standards. DSP Processing included, there’s nothing you can’t do with them. Lowest weight and highest efficiency.

Simple - Powerful - Lighter

DSP-10000

Rated output power (8Ω) 2x1500W


Rated output power (2Ω) 2X4800W

Maximum bridged output power (16Ω) 3000W



Maximum RMS voltage swing (THD=1%, 1kHz) 109V

Slew rate (at 1kHz) 50V/us

Input sensitivity (at rated output power or voltaje, 1kHz) 1Vrms

THD (0.1W full power) 0.05%

SPECIFICATIONS DSP-10000

IMD-SMPTE (0.1W full power) 1%

DIM30 (0.1W full power) 1%

Crosstalk (ref. 1kHz at 10% rated output power) -70 dB

Frequency response (ref. 1kHz) 20 Hz a 20KHz +/- 2d

Input impedance 20kΩ

Damping Factor (at 100Hz/1kHz 8Ω) >200

Signal-to-Noise ratio ( At weighted 20Hz-20kHz) >105dB

Power requirements AC~100-240V (50-60Hz)

Net Weight 9 kg. / 20 lbs.

Dimensions483x370x44 mm. / 19 x14.5 x 1.7 in.

SPECIFICATIONS

03 04

DSP-20000 / Simple - Powerful - Lighter

DSP-20000



Rated output power (2Ω) 2X9500W




Maximum RMS voltage swing (THD=1%, 1kHz) 14 9V

Slew rate (at 1kHz) 50V/us

Input sensitivity (at rated output power or voltaje, 1kHz) 1Vrms

THD (0.1W full power) 0.05%

SPECIFICATIONS DSP-20000

IMD-SMPTE (0.1W full power) 1%

DIM30 (0.1W full power) 1%

Crosstalk (ref. 1kHz at 10% rated output power) -70 dB

Frequency response (ref. 1kHz) 20 Hz a 20KHz +/- 2d

Input impedance 20kΩ

Damping Factor (at 100Hz/1kHz 8Ω) >200

Signal-to-Noise ratio ( At weighted 20Hz-20kHz) >105dB

Power requirements AC~100-240V (50-60Hz)

Net Weight 9 kg. / 20 lbs.


SPECIFICATIONS

DSP

-200

00 /

1.

2 PO

WER

AM

PLIF

IERS

AU

DIO

LAB

04

DA-2500 II DA-4000 II

DA Series /

A trustable amplifier is always a must.The DA Series, with its efficient switching power supply, succeeds in giving unprecedent power density with Sonic transparency.

Efficient - Versatile - Professional

DA-2500 II DA-4000 II

Rated output power (8Ω) 2X2350W 4x1250W



Maximum bridged output power (16Ω) 4700W 2500W



THD (1 kHz and 1 db below clipping) 0,05% 0,05%

SPECIFICATIONS DA-2500 II DA-4000 II

Signal Noise Ratio (dB) >112dBA >112dBA

Channel separation (Crosstalk) at kHz >70 dB >70 dB

Input Impedance 20kΩ 20kΩ

Input Common Mode Rejection, CMR 54 dB 54 dB

Output Connectors: Speakon connectors Speakon connectors

Weight 12 kg. / 26.4 lbs. 12 kg. / 26.4 lbs.

Dimension483 x 377 x 88 mm. /

19x13.5x3.5 in.483 x 377 x 88 mm. /

19x13.5x3.5 in.

SPECIFICATIONS

DA-

2500

II &

DA-

4000

II /

1.

4 PO

WER

AM

PLIF

IERS

AU

DIO

LAB

06

Features

- Professional Class DA output stages for high efficiency and sonic transparency.- Unprecedented power density: The DA-2500 II delivers a total of 14000 W (2 x 7000 W @ 2 ohms) in only

2 rack spaces.- Proven durability in extreme touring conditions.- Comprehensive protection and warning — Output current, DC, high temperature, very high frequency

(VHF), short circuit, open load, mains fuse protection, and soft start.- All channels bridgeable with automatic -6dB summing compensation.- Outputs optimized for load conditions with VPL.- Efficient and uniform Intercooler cooling.

Features

- Professional Class DA output stages for high efficiency and sonic transparency.- Unprecedented power density: The DA-4000 II delivers a total of 8800 W (4 ohms) in only 2 rack spaces.- Four channels — All channels bridgeable for 2- or 3-channel configurations.- Lo-Z or Hi-Z (70 V / 100 V) — Selectable per channel, normal or bridged.- Voltage Peak Limiter (VPL) — Configurable per channel to optimize each output for connected loads.- Professional Class DA output stages for high efficiency and sonic transparency.- Comprehensive protection and warning — Output current, DC, high temperature, very high frequency

(VHF), short circuit, open load, main fuse protection, and soft start.- Efficient and uniform Intercooler cooling.

Features: The DQX Series has the high reliability and applicability of classic power amplifiers, with a re-designed digital modulation circuit, which gives the input a larger dynamic range. High efficiency & small distortion.

Power supply: Advanced SMPS circuit and APFC design to provide a globally applicable power supply with extremely high efficiency. Based on these two technologies, the power supply of the amplifier has major advantages: low harmonic wave, high efficiency, high power factors. Power amplification: New circuit topology: Obtain a better sound output after applying new sound settings. In addition, the fixed switch frequency is greatly reduced, which allows a power amplifier to produce less heat and greatly enhances its efficiency. At the same time, the static power consumption is also reduced by a wide margin. Circuit protection: Short-circuit, over-voltage, under-voltage, temperature control, DC protection, peak clipping and amplitude limiting and VHF protection, as well as the automatic temperature control fan system.

1.3 POW

ER AM

PLIFIERS / DQX-7200 &

DQX-14400

AU

DIO

LAB

DQX-7200 DQX-14400

DQX Series /

Lighter, smaller and louder, the DQX Series brings modern solutions to touring, making it easy and simple. A unprecedented weight-power relation.

Lighter - Louder - Safer

DQX-7200 DQX-14400

Rated output power (8Ω) 4x650W 4x1200W






Maximum RMS voltage swing (THD=1%, 1kHz) 66V 97V

Slew rate (at 1kHz) 50V/us 50V/us

Input sensitivity (at rated output power or voltaje, 1kHz) 1Vrms 1Vrms

THD (0.1W full power) 0.05% 0.05%

SPECIFICATIONS DQX-7200 DQX-14400

IMD-SMPTE (0.1W full power) 1% 1%

DIM30 (0.1W full power) 1% 1%

Crosstalk (ref. 1kHz at 10% rated output power) -70 dB -70 dB

Frequency response (ref. 1kHz) 20 Hz a 20KHz +/- 2d 20 Hz a 20KHz +/- 2d

Input impedance 20kΩ 20kΩ

Damping Factor (at 100Hz/1kHz 8Ω) >200 >200

Signal-to-Noise ratio ( At weighted 20Hz-20kHz) >105dB >105dB

Power requirements AC~100-240V (50-60Hz) AC~100-240V (50-60Hz)

Net Weight 9 kg. / 20 lbs. 9 kg. / 20 lbs.


483x364x44 mm. / 19 x14.3 x 1.7 in.

SPECIFICATIONS

05

Line Arrays2.2.1 ALA-24/28A

2.2 ALA-210

2.3 ALA-212

2.4 ALA-118 / ALA-218

09

10

11

12

ALA

SERI

ES /

2. L

INE

ARR

AYS

AU

DIO

LAB

08

Features:

MH series power amplifier use particular MIRRORED FRONTED POWER SUPPLY BRIDGE to make the symmetrical circuit design. Less Distortion + Better Sound. Input power supply filter: Stronger anti-jamming capability. Am-plifier circuit with shield cover: Less noise, clearer sound. Independence close cooling wind path to make the cooling faster. Protection: Power on amortize, delay connect speaker, limited function, over-current protect, overheat protect, short-cut protect and output DC protect. 3800W or 6000W rated output at 2Ω.

1.5 POW

ER AM

PLIFIERS / MH-7200 &

MH-9400

AU

DIO

LAB

MH-7200 MH-9400

MH Series /

The MH Series is AUDIOLAB’s professional answer for those who need outstanding output levels and a continuos 2-ohms use. Is ideal for clubs and touring applications that demand the finest audio quality.

Strong - Powerful - Reliable

MH-7200 MH-9400



Rated output power (2Ω) 2X1900W 2X3000W



OutPut Circuit Type Class H Class H

Input Impedance 20kΩ 20kΩ

Frequency Response 20Hz~20KHz 20Hz~20KHz

THD 0.05% 0.05%

80V/usec 80V/usec

SPECIFICATIONS MH-7200 MH-9400

Slew Rate 80V/usec 80V/usec

Hum and Noise 103dB 103dB

Damping Factor >500 >500

RadiatorHigh/Low Automatism

CorlrolHigh/Low Automatism

Corlrol

SuteguardDC Safeguard/out

Overloading/Chancroid Sgartup/Boot-Strap Short

DC Safeguard/out Overloading/Chancroid

Sgartup/Boot-Strap Short

Net Weight 27 kg. / 59.5 lbs. 35.5 kg. / 78 lbs.

Gross Weight 30 kg. / 66 lbs. 38.5 kg. / 85 lbs.

Dimensions482×443.5×88.8 mm. /

19x17.4x3.5 in.482×468×132 mm. /

19x18.4x5.2 in.

SPECIFICATIONS

07

Features:

- 4 x ALA24 mid/high boxes consisting of 1 x Ribbon and 2 x 4” drivers per cabinet and 1 x ALA28 Subwoofercabinet comprising of 2 x 8” drivers.

- Built-in power amplifier module and DSP speaker processing within the ALA-28.- The DSP includes PEQ, Crossover and Slope, Delay, Gain and Limiter and is programable via either RS232

or USB by PC.- RS485 allows multiple systems to be connected together for control.- Software included.- XLR Input and output connectors.- Integrated rigging and speaker cabling included.- Rigging allows adjustment of ALA24 in 1° increments.- Durable Polyurethane textured base paint.- Up to 4 systems can be arrayed- Ribbon tweeters used in this system can give a wide frequency response up to 40KHz, which guarantees

high fidelity and nice sound coverage.

ALA

-210

/ 2

.2 L

INE

ARR

AYS

AU

DIO

LAB

2.1 LINE A

RRAYS / ALA-24/28AA

UD

IOLA

B

ALA-24/28A /

The ALA 24-28 is the ideal powered line array system for small/medium venues. With a compact design and a DSP processor, versatility and sound quality are guaranteed.

Bright - Portable - Modern

ALA-24/28A

Frequency Response (-3dB) 50Hz-40KHz

(-10dB) 45Hz-40KHz

Power Rating L:300W H:300W

Standard SPL 115dB

Max SPL 121dB

Crossover point L/M: 125Hz, M/H :3.2KHz

Input Impedance 10k ohm

SPECIFICATIONS ALA-24/28A

Dispersion 120 degree x (30°-90°) switchable

Connecting Mode NL4

Power supply AC 230V/50Hz

Product Dimensions 492×608×900 mm. / 19.4 x 24 x 35.5 in.

Packaging Dimensions 697×696×580 mm. / 27.5 x 27.5 x 22.8 in.

Net Weight 45 Kg. / 99 lbs.

Gross Weight 50 Kg. / 110 lbs.

SPECIFICATIONS

09 10

Features:

- The ALA-210 is a line array loudspeaker system for medium scale sound reinforcement. The cylindrical wavesegments of each cabinet will couple without gaps and sum up coherently.

- All components are arranged symmetrically around the centre axis of the cabinet to produce a perfectsymmetrical dispersion pattern.

- The ALA-210 cabinet is made of plywood and has an impact and weather resistant polyurethane finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. At the side panels to handles are let in.- All necessary rigging components are mounted at the cabinet and open up or slide out when needed. Up

to 4 ALA-210 cabinets can be stacked and interlinked using the standard ALA rigging components and the flying frame as ground support.

- The ALA-210 loudspeakers are mechanically connected by using its three point suspension system.- It consists of the flying frame which suspends the cabinets using rigging links and pins located on both sides of the front of the cabinets, and a central rear splay link.- This Series rear splay link allows quick and easy selection of vertical angles between the cabinets. These are

all permanently attached to the cabinets.

ALA-210 /

The ALA -210 is a line array loudspeaker for medium scale sound reinforcement. Born to satisfy the most demanding audio professionals, ALA-210 is the result of years of development and research.

High Fidelity - High Power - High Performance

ALA-210

Frequency Response 55 Hz-18 kHz

Sensitivity 104dB 1W/1M PER UNIT, 134dB PER 12 UNITS

Max Sound Pressuer 139dB

Dispersion 108 x 10 degree

Nominal impedance LF 8/16 ohms

Nominal impedance HF 8/16 ohms

Power handling capacity LF 400W/1900W peak 10 ms

Power handling capacity HF 160W/Peak 450W

SPECIFICATIONS

ALA-210

LF 2 x 10” neodymium drive

HF 2 x 4”x 1” 101.6 x 25,4 mm neodymium

Kapton planar wave drivers max SPL 133 dB

COMPONENTS

Frequency response-HF Frequency response-LF

Frequency response-HFFB-210 AVAILABLE

19.8’’31.5’’

11.8

’’

Front View Top View Back ViewSide View

19.4’’

Front View

24’’

35.5

’’

Side View

ALA

-118

, ALA

-218

/

2.4

LIN

E A

RRAY

SA

UD

IOLA

B2.3 LIN

E ARRAYS / ALA-212

AU

DIO

LAB

11 12

Features:

- The ALA-212 is a line array loudspeaker system for large scale sound reinforcement. The cylindrical wavesegments of each cabinet will couple without gaps and sum up coherently.

- All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symetrical dispersion pattern.

- The ALA-212 cabinet is made of plywood and has an impact and weather resistant polyurethane finish. Thefront of the loudspeaker cabinet is protected by a rigid metal grill. At the side panels to handles are let in.

- All necessary rigging components are mounted at the cabinet and open up or slide out when needed. Up to4 ALA-212 cabinets can be stacked and interlinked using the standard ALA rigging components and the flying frame as ground support.

- The ALA-212 loudspeakers are mechanically connected by using its three point suspension system.- It consists of the flying frame which suspends the cabinets using

rigging links and pins located on both sides of the front of the cabinets, and a central rear splay link.- This Series’ rear splay link allows quick and easy selection of vertical angles between the cabinets. These are

all permanently attached to the cabinets.

ALA-212 /

The ALA -212 is a line array loudspeaker for large scale sound reinforcement. Born to satisfy the most demanding audio professionals, ALA-212 is the result of years of development and research.

High Fidelity - High Power - High Performance

ALA-212

RMS power LF:5002W, HF:100W

Dispersion LF:110°x 90°, HF:90° x 20

Frequency responseLF: 90Hz 4 kHz (-3dB)

HF: 900Hz15 kHz) (-3dB)

Sensitivity LF 102dB ( 1m/1W), HF:110dB (1m/1W)

Max SPL LF 131dB, HF:134dB

Security Overheat protection for driver

Dispersion lF:110 °×90 ° HF:90 °×20 °

SPECIFICATIONS

ALA-212

Double 3” Neo compression driver

Double 12” Neo woofer

COMPONENTS

ALA-118 / ALA-218 /

ALA-118 is a professional wooden 18” subwoofer manufactured by AUDIOLAB.It is made of MDF toasting Paint.

Powerful - Punchy - Strong

ALA-118 ALA-218

Transducers LF:18”×1 LF:18”×2

Frecuency Response (-3dB/-10dB)48Hz - 1000HZ /40Hz - 1200 HZ

35Hz - 1800 Hz /-

Sensitivity(1W/1m) 96dB 102dB

Rated Power (RMS) 500W 1600W

SPL (1m) 123dB 134dB

Max.SPL(1m) 129dB 140dB

THD (1 kHz and 1 db below clipping) 0,05% 0,05%

SPECIFICATIONS

Features

- 1 x 18” professional subwoofer - High intensity enhanced cabinet construction- Flexible proprietary flying system - Can be used assigned with full range high SPL output speakers- Suitable for enhanced LF system

Features

- Computer aided design to optimise frequency and phase response- Two transducers high sensitivity speaker.- Two 18” high efficiency subwoofers.- Driven by one amplifier.- Suitable for the entertainment sound reinforcement, including performance bar, night club, touring perfo

mance.- Used for high quality output replaying music working with full range speaker.

The ALA-218 is a profesional wooden 2 x 18”subwoofer manufactured by AU-DIOLAB. Ideal for large venues and Line array reinforcement.

ALA-118 ALA-218

Rated Impedance 8Ω 4Ω

Input Connectors LN4×2 NL4×2

Net Weight 52 Kg. / 114,5 lbs. 85 kg. / 187 lbs.

Dimensions 640x640x640 mm. / 25 x

25 x 25 in.567×786×1075 mm. /

22x31x42 in.

SPECIFICATIONSALA-212

PowerLF: 500W HF: 100W (RMS)

LF: 1000W HF: 200W (MUSIC)LF: 2000W HF: 400W (PEAK)

Rated impedance LF:8Ω HF:8Ω

DC impedance LF:6Ω HF:6.4Ω

Connector NL4×2 @ LF:1+ 1- HF2+2-

Net Weight 37 Kg. / 81.4 lbs.

Dimensions 960×372×623 mm. / 37.8×14.7× 24.5 in.

SPECIFICATIONS

2 50

100 200 500 1k

2k

5k

10k 20k20

Hz

120

dBS

180. 0

Deg

110 108. 0

100 36.0

90

-36. 0

80

-108.0

70 - 180. 0

CL IO

FREQUENC Y RESPON SEPHAS E CURV E

130

2 50 100 2005 00 1k 2 k 5k 1 0k 20k20

Hz

120

dBS

110

100

90

80

CL IO 180. 0

Deg

108. 0

36.0

-36. 0

-108.0

- 180. 0

FREQUENCY RESPONSEPHAS E CURV E

Frequency response-HF Frequency response-LF

FB-212 AVAILABLE

25’’

25’’

25’’

Front View Top View

22’’ 31’’

42’’

Front View Top View

24.5’’37.8’’

14.7

’’

Front View Top View Back ViewSide View

Sound Reinforcement3.3.1 TA-12A / TA-15A

3.2 TA-10A / TA-212

3.3 RS-18A / RS-215

3.4 MF-12A / MF-15A

14

15

16

17

3. SOU

ND

REINFO

RCEMEN

T / RS & M

F SERIESA

UD

IOLA

B

13

TA-

12A

& TA

-15A

/

3.1

SOU

ND

REI

NFO

RCEM

ENT

AU

DIO

LAB

14

TA-12A / TA-15A /

Extraordinary performance. The TA Series is built to succed. Lighter, louder and clearer than you can imagine.

Light - Portable - Self-Powered

TA-12A TA-15A

TransducersLF: 12”×1 HF: 1.7’’×1

LF: 15”×1 HF: 1.7’’×1

Frecuency Response (-3dB) 50Hz-20kHz 45Hz-20kHz

Cabinet Plastic Plastic

Rated Power 1100W (RMS) 1100W (RMS)

Amplifier Type Class D Class D

Maximum SPL (1W @ 1m) 130dB (Peak) 133dB (Peak)

SPECIFICATIONS

Features

- 2 way active full range speaker- One 12”woofer- One 1.7” compression driver- Class D power amplifier- Rugged ABS enclosures- Heavy duty protective grill- Integrated Monitor feet allow the easy stage monitor application

Features

- 2 way active full range speaker- One 15”woofer

- One 1.7” compression driver- Class D power amplifier- Rugged ABS enclosures

- Heavy duty protective grill- Integrated Monitor feet allow the easy stage monitor application

TA-12A TA-15A


Input Impedance Bal. 20kΩ, Unb. 10kΩ Bal. 20kΩ, Unb. 10kΩ

Connectors XLR/TRS XLR/TRS

Dispersion (H x V) 90° x 60° 90° x 60°

Power Supply 115V/230V 110V/220V

Dimensions (W x D x H)368x349x630 mm. / 14.5x13.7x24.8 in.

450x396x780 mm. / 17.7x15.6x30.7 in.

Net Weight 21.5 Kg. / 47.4 Lbs. 28.7 Kg. / 63.27 Lbs.

SPECIFICATIONS

14.5’’

Front View Side View

Top View

24.8

’’

13.7

’’

17.7’’


Top View

30.7

’’

15.6

’’

RS-

18A

& R

S-21

5 /

3.3

SO

UN

D R

EIN

FORC

EMEN

TA

UD

IOLA

B

16

3.2 SOU

ND

REINFO

RCEMEN

T / TA-10A & TA-212A

AU

DIO

LAB

15

RS-18A /

The RS Series is a profesional sound reinforcement series. Born to satisfy the most demanding costumers in large-medium scale applications.

Self-Powered - Portable - Loud

RS-18A RS-215

TransducersLF: 18”×1

-LF: 15”x2

HF: 3”x1 Compression Driver

Frecuency Response (-3dB) 40Hz-300Hz 45Hz-16kHz

Construction 18mm Birch Plywood 15mm Birch Plywood

Rated power500W (RMS)

1000W (Program)2000W (peak)

600W (RMS)1200W (Program)

2400W (peak)

Dispersion(H×V) - 90 ° x 40°

SPECIFICATIONS

Features

- High output SPL and sensitivity. - Built-in power amplifier module.- 1 x 18” high power low frequency transducer with 100mm voice coil.- Master volume control. - XLR input and output connectors. - Phase switch.- Computer aided design to optimise frequency and phase response. - Cabinet designed for FOH use.- Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinet.- Powder coated grill with foam backing. - Durable Polyurethane textured base paint.

Features

- 2 x15” high power Neodymium transducers with 75mm voice coil- Computer aided design to optimise frequency and phase response- Cabinet design for FOH use- Suitable for use as a main system with or without sub speaker augmentation- Portable system (stand), or permanent installation (wall, ceiling)- Adjustable flying track on the top and bottom of the speaker- Powder coated grill with foam backing- Durable Polyurethane textured base paint

RS-18A RS-215


Crossover - 1.8kHz

Connector1 x Combo 6.35/XLR Input

1 x XLR Output2 x NL4

Maximum SPL (1W @ 1m) 124dB/130dB (peak) 126dB/132dB (peak)

Net Weight 38 kg. / 83.6 lbs. 48 kg. / 105.6 lbs.

Dimensions 600x640x550 mm. / 23.6x25.2x21.7 in.

530x530x1075 mm./ 20.9x20.9x42.3 in.

SPECIFICATIONS

RS-215 / Hi-Fi - Portable - Loud

180

108

36

-36

-108

-180

Frequency (Hz)

Sensitivity

(dB

)

2 5 1 02 0 5 01 2 5 1 0 2 02 H

1 2 0

d B S

1 1 0

1 0 0

9 0

8 0

7 0

Frequenc y Response2nd Distor tion3rd Distor tion

Frequency response & Impedance curve

200001000010001005020

30

20

10

4

70

80

90

100

110

Sensitivity (dB)

Impedance (Ohms)

60

Frequency (Hz)

Frequenc y response cur ve Impedanc e curve

Frequency response & Impedance curve

Front View23.6’’

Top View

25.2

’’

21.6

’’

20.9’’

Top View Front View

42.3’’

20.9

’’

TA-10A / TA-212A /

Extraordinary performance. The TA Series is built to succed. Lighter, louder and clearer than you can imagine.

Light - Portable - Self-Powered

TA-10A TA-212A

TransducersLF: 10”×1 HF: 1.4’’×1

2 x 12” with 4” V.C.

Frecuency Response (-3dB) 55Hz-20kHz 31.5Hz-120Hz

Cabinet Plastic Plastic

Rated Power 550W (RMS) 2000W (RMS)

Amplifier Type Class D Class D

Maximum SPL (1W @ 1m) 124dB (Peak) 135dB (Peak)

SPECIFICATIONS

Features

- 2 way active full range speaker- One 10”woofer- One 1.4” compression driver- Class D power amplifier- Rugged ABS enclosures- Heavy duty protective grill- Integrated Monitor feet allow the easy stage monitor application

Features

- Active subwoofer- Two 12” woofers with 4” V.C.

- Class D power amplifier- Rugged ABS enclosures

- Heavy duty protective grill- Integrated Monitor feet allow the easy stage monitor application

TA-10A TA-212A


Input Impedance Bal. 20kΩ, Unb. 10kΩ Bal. 20kΩ, Unb. 10kΩ

Connectors XLR/TRS XLR/TRS

Power Supply 115V/230V 110V/220V

Dimensions (W x D x H)306x238x516 mm. /

12x9.4x20.3 in.460x520x720 mm. / 18.1x20.4x28.3 in.

Net Weight 13.8 Kg. / 30.4 Lbs. 41 Kg. / 90.4 Lbs.

SPECIFICATIONS

12’’


Top View

20.3

’’

9.4’

’

20.4’’


Top View

28.3

’’

18.1

’’

Professional Mixers4.4.1 ALM-2416 / ALM-2424

4.2 ALM-2432 / ALM-2440

19

20

ALM

SER

IES

/ 4

. PRO

FESS

ION

AL

MIX

ERS

AU

DIO

LAB

18

3.4 SOU

ND

REINFO

RCEMEN

T / MF-12A &

MF-15A

AU

DIO

LAB

17

MF-12A / MF-15A /

One Speaker, multiple aplications. This is an all-in-one solution for those who need a loudspeaker for sound reinforcement and stage monitoring.

Flexible - Versatile - Self-Powered

MF-12A MF-15A

System Built-in Crossover two way full ranger active speaker

Cabinet Configuration High intensity configuration

Frequency Response 60Hz~16KHz 15mm Birch Plywood

Rated powerHF:100W LF:300W

HF:100W LF:300W

Dispersion (H×V) 80°×50° 80°×50°

Frequency adjust 100Hz:±12dB/10Hz:±12dB 100Hz:±12dB/10Hz: ±12dB

SPECIFICATIONS

Features

- 2 way active full range speaker. One 15’’ woofer- One 3” compression driver with titanium diaphragm- Bi-amplifier design for independant HF, LF, active frequency compensation , auto electrical limit protection

adjust for LF/HF- Cabinet built with high intensity materials. Flying point in the cabinet, support hole in the bottom- High sensitivity, MF/HF is very clear and LF is very powerful

MF-12A MF-15A

Input Impedance Balance:20K Unbalance:10K Balance:20K Unbalance:10K

Power Supply~110V/~220V 50Hz

Manual select~110V/~220V 50Hz

Manual select

Input Connectors XLR J3P/XLR K3P XLR J3P/XLR K3P

Maximum SPL (1W @ 1m) 120dB(Free Field) 120dB(Free Field)

Net Weight 30Kg. / 66 lbs. 37 Kg. / 82 lbs.

Dimensions 377×395×610 mm. /

14.8x15.5x24 in.458×542×747 mm. /

18x21.3x29.5 in.

SPECIFICATIONS

Features

- 2 way active full range speaker. One 12’’ woofer- One 3” compression driver with titanium diaphragm- Bi-amplifier design for independant HF, LF, active frequency compensation , auto electrical limit protection

adjust for LF/HF- Cabinet built with high intensity materials. Flying point in the cabinet, support hole in the bottom.- High sensitivity, MF/HF is very clear and LF is very powerful

16’’

Top View

14.5

’’

Front View

23.6

’’

18.2’’

Top View

17.3

’’

Front View

28.3

’’

ALM

-243

2 &

ALM

-244

0 /

4.2

PRO

FESS

ION

AL

MIX

ERS

AU

DIO

LAB

20

ALM-2432 ALM-2440

4.1 PROFESSIO

NA

L MIX

ERS / ALM-2416 &

ALM-2424

AU

DIO

LAB

19

ALM-2416 ALM-2424

ALM-2416 / ALM-2424 / ALM-2432 / ALM-2440

The ALM Series is the AUDIOLAB classic console. Built with the highest standards of quality, the ALM Series is the AUDIOLAB answer for those who demand a classic and trustable console.

Classic - Trustable - Compact

ALM-2416

16 channels, LR and M main mixers. Assignable talkback to all channels can be optional. 24 channels, LR and M main mixers. Assignable talkback to all channels can be optional.

4 audio groups; 6 AUX sending channels.Each equip with pre/post fader switch.

1kHz oscillator/pink noise generator with patchable external output.



2 stereo channels. Each channel equips with mic and dual-stereo input.

2-track monitoring and replay to LR.2 stereo channels.

Each channel equips with mic and dual-stereo input2-track monitoring and replay to LR.

Fully featured 7x4 matrix; proper dual functionality for FOH/Monitormixing.

Headphones/earpiece sockets and local monitor outputs.Fully featured 7x4 matrix; proper dual functionality for FOH/

MonitormixingHeadphones/earpiece sockets and local monitor outputs.

Mono channels can be used for left/right mix, LR mono sum, or engineers wedge.

Electronically balanced XLR outputs with +26dBu drive capability.

Mono channels can be used for left/right mix, LR mono sum, or engineers wedge


Recording capable with channel direct outputs. Preamp 74dB range with +34dBu input capability. Recording capable with channel direct outputs. Preamp 74dB range with +34dBu input capability.

Matrix external inputs with level trims and common input. Ultra low noise mix head amp design. Matrix external inputs with level trims and common input. Ultra low noise mix head amp design.

Stereo channel can be independently allot to left and right.Built-in combiner for redundant backup supply, with MPS12

PLUG (16 to 32 channels model).Stereo channel can be independently allot to left and right.

Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).

Stereo channel mic inputs can cross patch into matrix for ambience feed.

Uses RPS11 high performance external linear power supply.Stereo channel mic inputs can cross patch into matrix for

ambience feed.Uses RPS11 high performance external linear power supply.

Responsive 4 band,2 sweep EQ; 100Hz high pass filter. Provide RPS11 backup socket additionally; (for 40 channels) Responsive 4 band,2 sweep EQ; 100Hz high pass filter. Provide RPS11 backup socket additionally; (for 40 channels)

Individual phantom power and polarity switching. 100mm dustproof pan. Individual phantom power and polarity switching. 100mm dustproof pan.

Wide angle channel and master meters. Individual circuit card assembly with nutted pots. Wide angle channel and master meters. Individual circuit card assembly with nutted pots.

Internal jumper plugs for pre/post-EQ AUX, direct out and other options.

Sys-link V2 console input/output lining option.Internal jumper plugs for pre/post-EQ AUX, direct out and

other options.Sys-link V2 console input/output lining option.

Mutes ,level and AFL on all fader masters 4-pin XLR lamp sockets. Mutes ,level and AFL on all fader masters 4-pin XLR lamp sockets.

Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in. Weight: 18 kg. / 39 lbs. Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in. Weight: 18 kg. / 39 lbs.

Features: Analog classic mixer. Ideal for live use and rental. Flight case included. 4 Versions : 16/24/32/40 channels. 4 Audio Groups. 6 AUX sending channels, pre/post fader switch. Fully featured 7x4 matrix. External power supply.

ALM-2424

ALM-2432

32 channels, LR and M main mixers. Assignable talkback to all channels can be optional. 40 channels, LR and M main mixers Assignable talkback to all channels can be optional.





2 stereo channels. Each channel equips with mic and dual-stereo input.

2-track monitoring and replay to LR.2 stereo channels.

Each channel equips with mic and dual-stereo input2-track monitoring and replay to LR.

Fully featured 7x4 matrix; proper dual functionality for FOH/Monitormixing.

Headphones/earpiece sockets and local monitor outputs.Fully featured 7x4 matrix; proper dual functionality for FOH/

MonitormixingHeadphones/earpiece sockets and local monitor outputs.

Mono channels can be used for left/right mix, LR mono sum, or engineers wedge.


Mono channels can be used for left/right mix, LR mono sum, or engineers wedge


Recording capable with channel direct outputs. Preamp 74dB range with +34dBu input capability. Recording capable with channel direct outputs. Preamp 74dB range with +34dBu input capability.

Matrix external inputs with level trims and common input. Ultra low noise mix head amp design. Matrix external inputs with level trims and common input. Ultra low noise mix head amp design.

Stereo channel can be independently allot to left and right.Built-in combiner for redundant backup supply, with MPS12

PLUG (16 to 32 channels model).Stereo channel can be independently allot to left and right.

Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).

Stereo channel mic inputs can cross patch into matrix for ambience feed.

Uses RPS11 high performance external linear power supply.Stereo channel mic inputs can cross patch into matrix for

ambience feed.Uses RPS11 high performance external linear power supply.

Responsive 4 band,2 sweep EQ; 100Hz high pass filter. Provide RPS11 backup socket additionally; (for 40 channels) Responsive 4 band,2 sweep EQ; 100Hz high pass filter. Provide RPS11 backup socket additionally; (for 40 channels)

Individual phantom power and polarity switching. 100mm dustproof pan. Individual phantom power and polarity switching. 100mm dustproof pan.

Wide angle channel and master meters. Individual circuit card assembly with nutted pots. Wide angle channel and master meters. Individual circuit card assembly with nutted pots.

Internal jumper plugs for pre/post-EQ AUX, direct out and other options.

Sys-link V2 console input/output lining option.Internal jumper plugs for pre/post-EQ AUX, direct out and

other options.Sys-link V2 console input/output lining option.

Mutes ,level and AFL on all fader masters 4-pin XLR lamp sockets. Mutes ,level and AFL on all fader masters 4-pin XLR lamp sockets.

Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in. Weight: 18 kg. / 39 lbs. Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in. Weight: 18 kg. / 39 lbs.

ALM-2440

Processors5.5.1 DSP-2x6 / DSP-4x8 22

5. PROCESSO

RS / DSP SERIESA

UD

IOLA

B

21

DSP

-2X6

& D

SP-4

X8 /

5.

1 PR

OCE

SSO

RSA

UD

IOLA

B

22

DSP-2x6 DSP-4x8

DSP-2x6 / DSP-4x8 /

The DSP Series is an all-in-one digital processor, including crossover, equalizer, limiter, polarity selector, gain & delay. One processor for all applications. Touring gear.

All-in-one - Digital - Limitless

DSP-2X6 DSP-4X8

Mute Every channel have input mute (ON/OFF)

Delay Longest delay 1000 ms

Polarity Pol (+) or Pol (-)

Parameter Equalizer Every channel can set 6 parameter EQ (EQ-EQ6)

INPUT SPECIFICATIONS

Features

- Digital Processor with 2 inputs/6 outputs or 4 inputs/6 outputs- Input/Output XLR connectors- Feedback elimination- Auto-EQ Function- Pink Noise generator- Polarity Selector- Crossover / Limiter / Gain / Delay- Parametric Equalizer

DSP-2X6 DSP-4X8

Gain -12dB ~ +12dB Step distance 0.1dB

Delay Longest delay 1000 ms, can display in the computer by M or Ft.

Polarity Pol (+) or Pol (-)

Crossover Filter Type Link-Ril / Buttworth / Bessec

Frequency Point 20Hz ~ 20KHz

Slope 12dB, 18dB, 24dB, 48dB

LimiterThreshold: -20dBu ~ 20dBu

Attack: 0.3ms-100ms Release: Can be set to start time’s 2, 4, 6, 8, 16 or 32 times.

Parameter Equalizer

in ParamererFrequency point: 20Hz ~ 20KHz

Bandwidth: 0.05 ~ 3 Oct/wGain: -20dB ~ +20dB

In Lo-Shelf and Hi-ShelfFrequency point: 20Hz ~ 20KHz

Gain: -20dB~+20dBSlope: 6dB, 12dB

OUTPUT SPECIFICATIONS

WWW.AUDIOLAB-WEB.COM

WWW.AMERICAN-PRO.COMWWW.AUDIOLAB-WEB.COM

Documents

Audiolab - Full Line 2012