43
Seal & Signature of Bidder Page 1 of 43 जयपुर अंचल (राजथान राय) म बक की विवि शाखा / कायाालय / संथान म इंटालेशन, टेसटंग, कमीशसनंग एिं सुरा संबंधी उपकरण किषाक मरमत (सीसीटीिी वसटम एिं हायविड अलामा वसटम की आपूता) हेतु आिेदन सूचना NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS (CCTV SYSTEM & HYBRID ALARM SYSTEM) AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE). (अंचल कायाालय: बड़ौदा ििन, लाट नं 13, एयरपोटा लाजा, दुगाापुर, टक रोड, जयपुर – 302018) (Zonal Office: Baroda Bhawan, Plot No.13, Airport Plaza, Durgapura, Tonk Road, JAIPUR 302018) RFP Reference : JZ/SECURITY/Tender/2019/02

Bank of Baroda...installed at 715 branches / offices of Bank of Baroda, Jaipur Zone. Concerned System Integrator will have to enter into an agreement (as per the format decided by

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

  • Seal & Signature of Bidder Page 1 of 43

    जयपरु अचंल (राजस्थान राज्य) में बैंक की विविन्न शाखाओं / कायाालयों /

    ससं्थानों में इंस्टालशेन, टेसस्टंग, कमीशसनगं एि ंसरुक्षा सबंधंी उपकरणों की

    िार्षाक मरम्मत (सीसीटीिी वसस्टम एि ंहायविड अलामा वसस्टम की आपरू्ता) हते ु

    आिदेन सचूना NOTICE INVITING REQUEST FOR PROPOSAL (RFP)

    FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL

    MAINTENANCE OF SECURITY EQUIPMENTS (CCTV SYSTEM & HYBRID ALARM SYSTEM) AT DIFFERENT

    BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE).

    (अचंल कायाालय: बड़ौदा ििन, प्लाट नं 13, एयरपोटा प्लाजा, दगुाापुरा,

    टोंक रोड, जयपुर – 302018)

    (Zonal Office: Baroda Bhawan, Plot No.13, Airport Plaza, Durgapura, Tonk Road,

    JAIPUR – 302018)

    RFP Reference : JZ/SECURITY/Tender/2019/02

  • Seal & Signature of Bidder Page 2 of 43

    INDEX

    Sr.No PAGE NOTICE INVITING TENDER 3

    A IMPORTANT DATES 3

    B IMPORTANT DEFINITIONS 4

    1. SCOPE OF WORK 5

    2. SUBMISSION OF PROPOSAL 6

    3. ELIGIBILITY CRITERIA FOR BIDDERS 6-8

    4. BID SUBMISSION PROCESS 8-9

    5. INSPECTION OF FACILITIES 9

    6. EMD 9-10

    7. PERFORMANCE BANK GUARANTEE 10

    8. NO ERASURES OR ALTERATIONS 10

    9. NO PRICE VARIATIONS 10

    10. VALIDITY OF OFFER AND PENAL CLAUSE 10

    11. EVALUATION PROCESS 11

    12. TERMS AND CONDITIONS 11-12

    13. CRITERIA FOR APPLICATION REJECTION / CANCELLATION OF REGULATION 12

    14. SETTLEMENT OF DISPUTES 12-13

    15. GUARANTEES 13

    16. AVAILABILITY OF SPARES 13

    17. WARRANTY 13

    18. MAINTENANCE STANDARD EXPECTED DURING WARRANTY 14

    19. AMC 14-15

    20. RETRIEVAL OF RECORDING ON CD / DVD 15

    21. GUIDELINES FOR OEM 15

    22. OPENING OF OFFERS 15

    23. SINGLE POINT OF CONTACT & DIRECT SUPPORT 15

    24. SETOFF 15

    25. COVENANTS OF THE SUCCESSFUL BIDDER 16-17

    26. INDEMNITY 17

    27. TERMINATION 17-18

    28. GOVERNING LAWS 18

    ANNEXURE-I (Letter to be given to bank by System Integrator) 19-20

    ANNEXURE-II (Format for application form)

    (a) PART-I (Supplier’s Profile) 21-22

    (b) PART-II (Registration Requirements) 23

    ANNEXURE-III (Letter to be given to bank by OEM) 24-25

    ANEXURE-IV (Details of engagement in FIs) 26-27

    ANNEXURE-V (Compliance CCTV System) 28-34

    ANNEXURE-VI (Compliance IP Based Hybrid Alarm System) 35-38

    ANNEXURE-VII (Commercial Offer CCTV System) 39-40

    ANNEXURE-VIII (Commercial Offer IP Based Hybrid Alarm System) 41-43

  • Seal & Signature of Bidder Page 3 of 43

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM

    INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT

    BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE. The General Manager, Bank of Baroda,Jaipur Zone, invites request for proposal (RFP) in two parts 1) SITC and Annual Maintenance Contract of CCTV system and 2) SITC Hybrid Alarm System and Annual Maintenance Contract of existing Alarm System - Anti Burglary Alarm System with Integrated Auto Dialer, Fire Alarm System and IP based Hybrid Alarm System at various bank branches / offices located in Jaipur Zone from reputed firms / manufacturers / authorized suppliers who have experience in SITC and maintenance of these systems. The empanelment shall be for a period of one year from 01.01.2020 and extendable upto two years based on the performance and it will be at the sole discretion of the Bank, unless terminated by the Bank at its own convenience by giving a prior notice of 30 days in writing to the firms without assigning any reason(s) and without any cost(s) or compensation therefore.

    Prospective service provider may download the RFP document from the Bank’s website

    www.bankofbaroda.in/tenders. RFP downloaded from website shall accompany the Banker’s Cheque / Demand draft of Rs 5000 /- (Non refundable) along with the Technical Bid.

    [A] Important Dates:

    RFP Reference Number RFP No: JZ/SECURITY/Tender/2019/02 Estimated Project Cost For CCTV ₹ 175 Lacs (For 3 Yrs)

    For Hybrid IP based Alarm System ₹75 Lacs (For 3 Yrs) Total Estimated Project Cost = ₹ 250 Lacs (For 3 Yrs)

    Tender Fee Rs.5,000/- in the form of Bank Draft/Banker’s cheque in favor of Bank of Baroda, payable at Jaipur.

    Earnest Money Deposit Rs. 2.50 Lacs (Rupees Two lacs fifty thousand only) in the form of Bank Draft/Banker’s cheque in favor of Bank of Baroda, payable at Jaipur.

    Availability of RFP document

    RFP will be available on our Bank website www.bankofbaroda.in/tenders from 09.10.2019 to 29.10.2019. The RFP may be downloaded from the Tender Section by the Bidders. No hard copy of the RFP will be made available by the Bank.

    Last date of submission of any query / reporting any error

    ALL QUERIES TO BE SUBMITTED VIDE EMAIL ONLY ON 17.10.2019 before 15:00 hrs

    Pre Bid Meeting On 18.10.2019 at 15:00 hrs

    Last Date, Time and Place for receipts of bids

    29.10.2019 at 15:00 hrs at Zonal Office: Baroda Bhawan, Plot No.13, Airport Plaza, Durgapura, Tonk Road, JAIPUR – 302018

    Date and Time of Technical bid Opening 29.10.2019 at 15:30 hrs

    Date and Time of Financial bid Opening Date and Time will be intimated by email to the qualified vendor after the Technical Evaluation of the Bids.

    Address for Communication Zonal Office Address: Bank Of Baroda, Zonal Office, Security Department Baroda Bhawan, 3rd Floor, P. No.13, Airport Plaza,

    Durgapura, Tonk Road, Jaipur - 302018

    Contact person Capt Anil Kumar Padwal, Chief Manager (Security, PE, EM,Proto) Mobile-9828716555, Tele- 0141-2727115

    [B] Important Definitions: - Following terms are used in the document interchangeably to mean:

    http://www.bankofbaroda.in/tenders

  • Seal & Signature of Bidder Page 4 of 43

    1. Bank, BANK means “Bank of Baroda”.

    2. ZO means Zonal Office Jaipur Zone”

    3. RFP means this “Request for Proposal Documents”

    4. Recipient, Respondent and Bidder, Vendor, means “Respondent to the RFP Document”.

    5. Tender means RFP response documents prepared by the Bidder and submitted to Bank of Baroda

    6. SI means System Integrator.

    7. Zone means “Jaipur Zone”

    8. POC means “proof of concept”

    Service providers fulfilling the specified requirements may submit their Bids as required so as to reach us latest on 29/10/2019 by 03:00 pm at the following address-

    Bank of Baroda, Jaipur Zone, Prospective bidders are requested to submit their points for clarification during pre-bid meeting at under mentioned email address latest by 17.10.2019 by 03:00 pm. (a) [email protected] (b) [email protected] Further “Addendum” shall be issued on Bank’s website only and bidder has to refer the same before final submission of the Tender. The Bank reserves the right to reject any / all applications without assigning any reason whatsoever.

    Confidentiality:

    This document is meant for the specific use by the Company / person/s interested to

    participate in the current tendering process. This document in its entirety is subject to

    Copyright Laws. Bank of Baroda expects the bidders or any person acting on behalf

    of the bidders to strictly adhere to the instructions given in the document and

    maintain confidentiality of information. The bidders will be held responsible for any

    misuse of the information contained in the document and liable to be prosecuted by

    the Bank. In the event of such a circumstance is brought to the notice of the Bank.

    By downloading the document, the interested party is subject to confidentiality

    clauses.

    mailto:[email protected]

  • Seal & Signature of Bidder Page 5 of 43

    1. Scope of the Work The scope of work is in two parts 1) SITC and Annual Maintenance Contract of CCTV system and 2) SITC for Hybrid Alarm System and Annual Maintenance Contract of existing Alarm System installed at 715 branches / offices of Bank of Baroda, Jaipur Zone. Concerned System Integrator will have to enter into an agreement (as per the format decided by the bank) with the Zone. New System Integrator to start the work w.e.f 01.01.2020. The empanelment shall be for a period of one year from 01.01.2020 and extendable upto two years based on the performance and it will be at the sole discretion of the Bank, unless terminated by the Bank at its own convenience by giving a prior notice of 30 days in writing to the firms without assigning any reason(s) and without any cost(s) or compensation therefore.

    Engagement of System Integrator should in no way be construed as work order. Zonal Purchase committee of the Zone shall decide the work allocation to the System Integrator. Decision of the committee shall be final and binding to all. No representation will be entertained. Bank has discretion to revise the scope of work upward / downward as per its requirement.

    It is highlighted and to be noted by prospective Applicants that they will be required to supply,

    install and maintain the Security Equipment (CCTV System and Integrated Hybrid IP based Alarm

    System during warranty period at their own cost and thereafter undertake AMC services as per

    bank's process.

    Further they will also be required to undertake AMC services of existing security equipment

    already installed and functional at various branches of the bank. LOCATIONS TO BE COVERED

    The services will be required to be provided for our Ajmer, Bharatpur, Bhilwara, Bikaner, Jaipur, Jodhpur, Kota, and Udaipur Regions in all their offices and branches both existing and opened during the tenancy of this contract. The broad areas presently under the jurisdiction of our above Regions are as detailed below –

    Sr. No.

    REGIONS STATE DISTRICT COVERED

    1 Ajmer Rajasthan Ajmer, Tonk

    2 Bharatpur Rajasthan Alwar, Bharatpur, Dausa, Dholpur, Karauli

    3 Bikaner Rajasthan Bikaner, Churu, Hanumangarh, Jhunjhunu, Sri Ganganagar

    4 Bhilwara Rajasthan Bhilwara, Chittorgarh, Pratapgarh, Rajsamand

    5 Jaipur Rajasthan Jaipur, Sikar

    6 Jodhpur Rajasthan Barmer, Jaisalmer, Jalore, Jodhpur, Nagaur, Pali

    7. Kota Rajasthan Baran, Bundi, Jhalawar, Kota, Sawai Madhopur

    8. Udaipur Rajasthan Banswara, Dungarpur, Sirohi, Udaipur

    Awarding Rate Contract-

    L-1 will be decided on package cost of each equipment as given in Commercial Bid

    (Annexure VII to Annexure VIII). The selected bidders will have to supply the equipment /

    provide the services at L-1 rates. Rates of each equipment including that of Non

    Commercial Items as quoted by L-1 will be applicable to all bidders.

    Bidder can apply for one or more Security Equipment subject to fulfilling all relevant terms and

  • Seal & Signature of Bidder Page 6 of 43

    conditions. L1 will be decided separately for each items as per Commercial Offer. Bank may split

    the work among L1 & L2 in ratio of 60:40 or in ratio of 60:20:20 amongst L1, L2 & L3, if L2 & L3

    agree to supply at the rates of L1. 2. Submission of Proposal

    The offer will be in two parts; Technical & Commercial separately. Both the parts should be submitted in separate sealed covers duly super-scribed "Technical Offer for Engagement of System Integrator for supply of security equipments (CCTV System / Integrated Hybrid IP based Alarm System)” and "Commercial Offer for Engagement of System Integrator for supply of security equipments (CCTV System / Integrated Hybrid IP based Alarm System)” respectively. The Financial Bid of the Security Equipment, for which the System Integrator is applying to be put in a separate envelope. Both sealed envelopes should be placed in another sealed envelope super-scribed “Engagement of System Integrator for Supply of Security Equipment in Bank of Baroda, Jaipur Zone” with our Security Department at above given address by 15:00 hrs on or before 29.10.2019 along with tender fee payment of Rs 5000/- (Non –refundable) towards the cost of Tender Document and Earnest Money of Rs 2.50 Lacs (Rs Two lacs fifty thousand only) by way of DD/Pay order in favour of Bank of Baroda payable at Jaipur in a sealed envelope. MSEs (Micro and Small Enterprise (MSE)/NSIC/KVI etc are exempted from paying the Earnest Money deposit (EMD) amount for which the concerned enterprise needs to provide necessary documentary evidence.

    System Integrator must sign each page of document submitted failing which the application is liable to be rejected. The proposal received after the time of submission, or without proposal fee and earnest money or conditional applications would be rejected. Further, the Bank reserves the right to accept or reject any or all applications without assigning any reason. Bank reserves right to cancel or withdraw the RFP without assigning any reason.

    The process of engagement and basic criteria which the Applicants should fulfill for engagement

    is given in subsequent paragraphs.

    3. Eligibility criteria for Bidders

    (a). General Instructions & Conditions

    i. One system Integrator will offer products of one OEM only i.e the package will have rates and products from one OEM only.

    ii. Please read the terms and conditions carefully before filling the proposal.

    iii. Please sign all the pages of the RFP including each page of the proposal form.

    iv. There should be no cutting / over writing. The cutting / over writing, if any, should be duly attested.

    List of Security Equipment under different categories for which engagement is sought i.e (1) CCTV System, (2) Anti Burglary Alarm System with integrated Auto Dialer, (3) Fire Alarm System, (4) IP Based Hybrid Alarm System. Applicants may seek engagement for one or more equipment or all the security equipment items mentioned in the list.

  • Seal & Signature of Bidder Page 7 of 43

    (b) Registration

    (i) The prospective applicant should be a registered company / firm including

    system integrators, manufacturers (OEMs) and or their authorized suppliers

    and dealers, capable of providing integrated solution of supply, installation,

    after sale services and maintenance of the system provided.

    (ii) The Applicants should have authentic PAN and GST distinguished

    registration numbers etc. allotted by competent authorities.

    (iii) The Applicants should have requisite trade/manufacturing/factory licence

    from appropriate authority.

    (iv) Certificate of statutory competent authority regarding Registration and

    Incorporation, Memorandum & Article of Association, Partnership Deed etc is

    a must.

    (c) Turnover and Service Network Criteria:

    The Applicants should have following financial turnover and service centre criteria :-

    Sr No

    Service

    Area Average Turnover for past 3 FYs.

    Minimum Number of Service/Regional Offices/Head Office Functional

    1 Jaipur Zone (Rajasthan State)

    (i) Rs 250 lacs for CCTV System (ii) Rs 150 Lacs for Integrated Hybrid IP based Alarm System

    One Office at Jaipur and another anywhere in Rajasthan State in Jaipur Zone. (If Regions are more than 6 then office at 2 places in the Zone. If Regions 5 or less than 5 then one Office and that to be located where Zonal Office is located). Establishment of the office shall be at least 1 year old (Proof to be submitted)

    (d) Experience and Product Certification

    The Applicants should have the following experience, product certification and other

    criteria -

    (i) Experience-The applicant should have minimum Five (5) years’ experience in the field of supplying and maintaining security equipments- CCTV System and Integrated Hybrid IP based Alarm System, required by the bank and for which engagement is sought, as on 30.09.2019.

    (ii) Work Executed. The bidder shall have carried out similar work of supply and maintenance of security equipment having executed cumulative order of following values during one financial year of last -5- years as on 30.09.2019. - For CCTV System

    One similar work of 80% of estimated cost i.e. Rs. 140 lacs OR Two similar works of 50% of estimated cost i.e. Rs.87.50 Lacs OR Three similar works of 40% of estimated cost i.e. Rs.70 Lacs.

  • Seal & Signature of Bidder Page 8 of 43

    - For Integrated Hybrid IP based Alarm System

    One similar work of 80% of estimated cost i.e. Rs. 60 lacs OR Two similar works of 50% of estimated cost i.e. Rs. 37.50 Lacs OR Three similar works of 40% of estimated cost i.e. Rs.30 Lacs.

    (ii) Product Certification. The products of the applicant should have certification, as the case may be, of quality given by the Bureau of Indian Standards BIS / RBI / IBA , UL, EN, FCC, CE and tested at Electronic Regional Test Laboratory or any other industry recognized certification as applicable and acceptable to bank. Preference shall be given to products having security certification. The products should be based on latest technology for the specific requirement.

    (iii) OEM Certificate. The applicant should have OEM certificate along with

    confirmation that they would supply spare parts for the quoted model for

    minimum next 5 years from the date of installation. OEM letter to be in Original

    and no photocopy or colored Xerox will be acceptable (In absence of the

    original certificate from the OEM the Service provider will be

    disqualified).

    (e) Installation / Work Experience: The applicant should have supplied to / be on the

    panel of at least -3- Financial Institutions during last 03 Financial Years.

    (f) Performance Certificate: The applicant should submit a "Satisfactory Performance

    Certificate" from at least -3- Financial Institution on whose panel it is conducting

    business related to supply of security equipment.

    (g) Supply & Installation: The applicant should be able to supply and install the

    products for which engagement is sought by themselves. No subletting of the work

    is permissible.

    (h) Past Record: The applicant should not have been blacklisted by any

    PSU/PSB/Financial Institution/Govt. Organization in past 5 years or services

    terminated due to poor performance. A certificate be submitted stating that the

    company/firm or its owner or any sister concern have not been blacklisted.

    (Annexure- I)

    (i) If any of our Zone has issued a dissatisfactory letter about any agency the bid of the

    company will be rejected in that / those Zone(s). 4. Bid Submission Process

    Interested parties shall submit their offers in sealed covers super scribed as "Technical Offer for Engagement of System Integrator for supply of security equipments” for Jaipur Zone

    The offer will be in two parts, Technical Bid and Price Bid. Technical Bid will be opened and after technical evaluation, suitable System Integrator will be short listed.

    The Financial Bid / Price bid will be opened of only those System Integrator who qualify technically.

    Part 1- Technical Offer- Shall contain the details required to be furnished by Tendering System Integrator, as enumerated under the heading Eligibility Criteria of this document.

  • Seal & Signature of Bidder Page 9 of 43

    The Technical Bid offer (TO) should be complete in all respects and contains all information asked in this document. It should not contain any price information. The Technical Bid offer should comprise of the following:

    (a) Covering letter on the prescribed format (Annexure-I).

    (b) Earnest Money Deposit of Rs2.50 Lacs in and cost of RFP Document of Rs 5000/-

    in the form of a demand draft / pay order issued by a scheduled commercial bank

    favouring Bank of Baroda, payable at Jaipur. Seperate DD/pay order to be submitted

    for EMD and cost of Tender.

    (c) Supplier’s profile as per (Annexure II)

    (d) Certificate from OEM (Original Equipment Manufacturer) (Annexure-III) that they

    would supply spare parts for the quoted model for minimum next 05 years. Letter

    from OEM will be in original (Hard copy), no xerox/ mail print is acceptable. In

    absence of this your Tender will be rejected.

    (e) CE , UL Certificates or any standard certificate in the field.

    (f) Documentation (Product Brochures, leaflets, manuals etc. of quoted model should

    be highlighted)

    (g) Details of reference sites as per Annexure IV including relevant completed work

    certificates.

    (h) Technical Specifications confirmation with all columns (Annexure-V-IX) (as

    applicable)

    No bid later than 29.10.2019 at 03:00 pm, shall be accepted. Part-2- Price Bid- Price bids of the product(s) offered will be kept together in one Sealed envelope (separately), super scribed "Commercial Offer for Engagement of System Integrator for supply of security equipment (CCTV System & Integrated Hybrid IP based Alarm)”for Jaipur Zone (Annexure-VII to Annexure VIII) Price Bid will not be included in Technical Bid and any Bid without the Price Bid shall be rejected.

    Both Technical and Commercial Bids be kept in the third envelope super scribed “Engagement of System Integrator for Supply of Security Equipment in Jaipur Zone.

    The Commercial Offer (CO) should contain relevant price information and the rates should be quoted in Indian Rupees only.

    The offer from the supplier should be for approved make and model only. The DVR and Cameras should be of the same make. The Bank reserves the right to reject any offer with multiple options.

    5. Inspection of Facilities: The applicant should not have any objection to bank inspecting

    their manufacturing / R&D /other infrastructure or any office to verify documentary/other

    claims as per application process. Bank may also hold inquiries from past/existing clients

    of the applicant.

    6. Earnest Money Deposit

    Earnest Money deposit of Rs 2.50 Lacs (Rs Two Lacs and Fifty Thousand only) in the form of DD/ Pay order favouring Bank of Baroda, payable at Jaipur, must be submitted along with Tender. Offers not accompanied with EMD will not be accepted. The EMD will be forfeited if, the bidder withdraws his bid during the selection process, or having been

  • Seal & Signature of Bidder Page 10 of 43

    selected by the Bank for the job, the System Integrator refuses to accept any contract or having accepted the contract, fails to carry out his obligations mentioned herein. No interest will be payable on the EMD. The EMD will be refunded to the unsuccessful System Integrator on completion of the process of selection. The Earnest Money paid by the successful System Integrator will be released only after furnishing the Performance Bank Guarantee.

    7. Performance Bank Guarantee

    Successful supplier should produce an unconditional Performance Bank Guarantee (10% of the estimated contract value of 3 years) from any Schedule Commercial Bank excluding Co-operative Bank and Bank of Baroda. The Performance bank Guarantee will be deposited at the respective Zonal Office at the following rate for a period of 3 years and 03 months from the date of commencement of contract-

    (I) CCTV System: Rs 17.50 Lakhs

    (II) Integrated Hybrid IP based Alarm System: Rs 7.5 Lakhs

    No Performance Bank Guarantee / deposit will be kept at branches.

    The Performance Bank Guarantee shall be adjusted against any loss, theft, damage, expense etc. to the Bank. During the period of contract including AMC period supplier should attend to all repairs / defects / replacement of major/minor spare parts free of cost. In case of failure on the part of the supplier to attend to the defects within a reasonable period, the Bank on its own will get the defects rectified through another System Integrator at the risk and cost of supplier and repairs rectified through another System Integrator in such circumstance will not affect the liabilities of the supplier on the warranty for its remaining period nor will it affect the supplier's liabilities on the stipulated post-warranty Comprehensive Annual Maintenance Contracts.

    8. NO ERASURES OR ALTERATIONS

    Technical / Commercial details must be completely filled up. Corrections or alterations, if

    any should be authenticated. Every page of the submitted tender must have company

    seal & signed by the authorized person.

    9. NO PRICE VARIATIONS

    The commercial offer shall be based on rates to be quoted exclusive of Taxes will be paid as per the prevailing mentioning breakup of taxes along with the item rates. The clause is to be read as: (i) Excise & Sales Taxes, Works Contract Tax, Service Tax for Works

    The Contractor shall pay and be responsible for payment of all taxes, duties, levies, royalties, fees or charges in respect of the works including but not limited to sales taxes, tax on works contract, Service Tax, Excise duties and octroi, payable in respect of materials, equipment, plant and other things required for the Contract.

    (ii) New Taxes, Duties & Levies, etc.

    If a new Tax or Duty or Levy is imposed under as statute or law during the currency of the contract, the same may be reimbursed to the Employer if so deemed fit on documentary evidence.

    10. VALIDITY OF OFFER AND PENAL CLAUSE & FALL CLAUSE

  • Seal & Signature of Bidder Page 11 of 43

    The offer should be valid for period of 180 days from the last date for submission of the offer.

    New installations shall be done as per directives of RO / ZO of Bank. New installation to be completed

    within 15 days of the receipt of the work order failing which 10% penal charges per week from the work

    order will be levied and deducted from the bill. AMC to be done within 7 days of due date otherwise

    20% penalty will be deducted from entire bill.

    Penalty Clause for non-Compliance of AMC: If the vendor fails to provide the AMC service

    for either of the quarter, a penalty of Rs.500/- per branch per quarter will be imposed on the

    respective service provider.

    If at any point of time, vendor is found to be supplying inferior material not confirming the prescribed

    technical specification and unsatisfactory services in terms of the provisions of the tender, Bank shall

    initiate steps for blacklisting of firm with information to all PSU Banks / RBI / IBA.

    FALL CLAUSE – At any point of time if it is observed that the vendor is supplying to other financial institutions / firms similar material / services at lower rates than offered to Bank of Baroda, then the vendor shall have to compensate the Bank of Baroda by paying the difference amount and downward revise the rate of respective item / services at the time of renewal of contract as applicable.

    11. EVALUATION PROCESS

    Offers will be evaluated in the following stages:

    Stage I

    Offers will be evaluated by Bank’s committee against the stipulated minimum eligibility

    criteria. Offers not complying with the eligibility criteria will be rejected summarily.

    Stage II

    A technical evaluation of proposals will be carried out. Offers received without fulfilling the

    conditions mentioned in Clause No. 3 page 6-8 and the following conditions, shall not be

    evaluated.

    (a) If offer is incomplete and/or not accompanied by all stipulated document.

    (b) If any of the terms and conditions stipulated in this document is not accepted and

    letter as per Annexure - I is not submitted.

    (c) If Models of DVR and Cameras quoted are not of same Make.

    Stage III

    Short-listing of supplier(s) based on the technical evaluation.

    Stage IV

    Product demonstration of the makes and model submitted by the respective System

    Integrator will be done by the bidder. In case the product fails to meet laid down technical

    specification / feature, the bid of all the System Integrators bidding with that particular make

    and model will be rejected at this stage.

  • Seal & Signature of Bidder Page 12 of 43

    Stage V

    Opening of commercial Bids of only those System Integrators whose product have qualified

    after product demonstration. Intimation to this effect would be given by emails to shortlisted

    bidders.

    The total charges stated for Annexure VII & VIII respectively will be considered for

    financial evaluation of the Commercial Bid.

    No Commitment to accept lowest or any tender – The bank shall be under no

    obligation to accept the lowest or any other offer received in response to this notice

    and shall be entitled to reject any or all offers without assigning any reason

    whatsoever.

    12. TERMS & CONDITIONS

    (a) Bank of Baroda’s Right to Accept/Reject any/or all Application

    BANK reserves the right to accept/reject any or all application and to annul the

    engagement process and accept/reject all applications at any time prior to

    registration or any time after registration, without thereby incurring any liability to the

    affected applicants or any obligation to inform the affected applicants of the grounds

    for BANK's action.

    (b) BANK's Right to Issue Clarifications, Addendums, Corrigendum etc

    BANK can at any time issue clarifications, addendums or corrigendum. The same

    will be published in the BANK's website. The applicants are requested to regularly

    visit the Bank's website.

    (c) Purchase through GEMS Portal (Government E-Market) Bank reserves the right to purchase the system through GeM portal of Govt. of India and provide the same to you for installation and commissioning in the required branch. However, cost of any material / component provided by you for installation and commissioning of the system would be paid to you as per approved rates, including installation charges.

    13. Criteria For Application Rejection/ Cancellation Of Registration

    a) Any effort by an applicant/ registered applicant to influence BANK's decisions on

    evaluation and registration process may result in rejection of application or

    cancellation of registration.

    b) Applications submitted without cost of Application Documents (Rs 5000/-) or which

    do not confirm unconditional validity of the application as prescribed or submission

    of false/fake Application Documents or if the information provided by the applicant is

    found to be incorrect /misleading at any stage / time during the engagement process

    or thereafter.

    c) Applications received by BANK after the last date and time prescribed for receipt of

    application or applications without signature of person (s) duly authorized on

    required pages of the application or applications without power of authorization

    and any other document consisting of adequate proof of the ability of the

    signatory to bind the applicant shall be rejected.

    d) Malpractice / attempt to influence / Manipulation of rates i.e quoting lower rates as

  • Seal & Signature of Bidder Page 13 of 43

    compared to the market / OEM rates, shall be viewed very seriously. If such a

    situation comes to the notice and/or there are reasons / circumstances for BANK

    to believe so, the concerned applicant will be called in to give justification of rates

    quoted by them to the committee. If they are not able to give a proper /

    satisfactory justification of their quoted rates, their engagement will be cancelled.

    If the System Integrator is found, subsequent to their registration and

    engagement , not complying with, any of the eligibility criteria.

    e) If continuous poor performance has been observed from an applicant.

    f) Any other grounds as decided by BANK management after due diligence.

    14. Settlement Of Disputes by Arbitration

    In the event of there being any dispute or difference arising between the parties the same shall be referred to the Zonal Manager, Bank of Baroda, Jaipur Zone, whose decision shall be final and binding on both the parties. However, if the parties are still not satisfied, the matter shall be referred to the sole arbitrator mutually agreed by the parties. The arbitration shall be conducted in accordance with the provisions of the Arbitration and Conciliations Act, 1996 (26 of 1996) or any statutory modifications or re-enactment thereof and the rules made there under and for the time being in force shall apply to the arbitration proceedings under this clause. The award of the arbitrator shall be final and binding on the parties. The venue of the arbitration shall be Zonal Office, Jaipur Zone. The fees, if any, of the arbitrator shall, if required to be paid before the award is made and published, be paid half and half by each of the parties. The cost of the reference and of the award (including the fees, if any, of the arbitrator) shall be in the discretion of the arbitrator who may direct to any by whom and in what manner, such costs or any part thereof shall be paid and fix or settle the amount of costs to be so paid.

    15. GUARANTEES

    The Security Systems including all components delivered to the Bank should be brand new. The supplier should also guarantee that all the software / components supplied by the supplier is licensed and legally obtained.

    16. AVAILABILITY OF SPARES

    Spares for the product offered should be available for at least 03 years.

    17. WARRANTY

    The offer must include comprehensive on-site warranty of -3- years for CCTV System and -2- Years for Alarm Systems from the date of installation and commissioning of the equipment.

    Supplier shall be fully responsible for the manufacturer’s warranty in respect of proper design, quality and workmanship of all equipments, accessories, etc., covered by the offer. The supplier must warrant all equipments, accessories, spare parts etc., against any manufacturing defects during the warranty period. During the warranty period the supplier shall maintain the equipment and repair / replace all the defective components at the installed site at no additional charge of whatsoever nature to the Bank except for annual visit charges during warranty period as agreed.

    18. MAINTENANCE STANDARD EXPECTED DURING WARRANTY

  • Seal & Signature of Bidder Page 14 of 43

    The supplier should ensure that the defects in the CCTV System and Alarm system reported on any working day is set right on the same day and in no case later than the next working day. In case, the system or any equipment cannot be repaired within the stipulated period, the supplier should provide a replacement till the system/equipment is returned duly repaired.

    19. ANNUAL MAINTENANCE CONTRACT (AMC)

    The AMC is of following type-

    (a) AMC of new SITC during warranty period-

    1) The supplier shall maintain the Security System including all accessories /

    components and software supplied for at least -3- years for CCTV System and

    -2- Years for Alarm Systems.

    2) No charges will be payable for repair / replacement of the system, component

    during this warranty period

    3) Only visit charges shall be payable during warranty period as quoted in price bid

    and agreed by both the parties.

    4) During the warranty period, the supplier will mandatorily visit the concerned

    branches at least once in a quarter for preventive maintenance/servicing and on

    call by the Bank any number of times in case of defects, if any, in the system

    without any additional cost to the Bank except visit charges. The supplier shall

    maintain the equipment and repair/replace all defective components, major or

    minor and may use for this purpose spares or consumables at no additional

    charge other than the AMC contract charges. The AMC charges will be released

    by the RO at the end of every -6- months on satisfactory performance of the

    system and against submission of a service report. System Integrator will submit

    comprehensive service certificates and bill to the respective Regional Office.

    (b) Comprehensive AMC of existing equipment (Outside Warranty Period)- AMC of existing equipment shall be for a period of -1- years from 01/01/2020 to 31/12/2020 extendable by -2- years based on the performance. The service provider will be required to make 4 quarterly visits. Payments will be made centrally by the Regional Office on half yearly basis.

    After the post-warranty mandatory comprehensive AMC period, the supplier may continue the Annual Maintenance Contract at the price/charges as may be mutually agreed upon by the Bank and the supplier. If any of the peripherals, components etc, are not available or difficult to procure or if the procurement is likely to be delayed, the replacement shall be carried out with equipment of equivalent capacity or higher capacity at no additional charges to the Bank during the currency of warranty period and AMC period.

    The comprehensive AMC would include all components and accessories which are

    an integral part of the complete system required to operate the system satisfactorily including wiring, power supply etc.

    However, following would not be covered under comprehensive AMC – (i) Batteries installed in Integrated Alarm System after expiry of their warranty

    period of 2 years.

    (ii) Damage caused to the system due to Fire, earthquake, floods etc. However

  • Seal & Signature of Bidder Page 15 of 43

    this will not include damage due to high voltage as all security equipment should compulsorily be connected through branch UPS.

    20. RETRIEVAL OF RECORDING ON CD/DVD

    As per requirement of the Bank / Branch, if request is made by the Bank / Branch to the vendor for retrieving recording for a particular time period and preparing a CD/DVD of the same, the vendor would make arrangements to retrieve and provide such recording on CD/DVD within 24 Hours of the request made. The vendor will be paid by the Bank / Branch an amount of Rs 1000/- per such retrieval, which will be over and above the AMC charges. The CD/DVD would be provided by the vendor for the purpose.

    21. Guidelines for the OEM -

    (a) OEM should have online dedicated support center available and during working hours and a fully equipped repair and maintenance office in India. Document details to be submitted for the same for verification.

    (b) The MAC address of the IP cameras must be registered in the name of OEM supplying the cameras.

    (c) OEM should have an ISO 9001:2008 and ISO 14001:2004 for manufacturing process. Documents needed to be attached along with the bid. (d) Documents of Manufacturing license/ Excise Registration of the OEM factory need

    to be submitted for verification. (e) Product Certification copies to be attached as per the specifications.

    (f) To evaluate the offered solution/products, POC will be conducted by technical committee. POC date(s) will be intimated separately after evaluation of Technical bids of prospective bidders.

    (g) Vendor will be responsible for non-genuine products. Audit for Banks whether actual material is provided or not needs to be done by OEM, as and when required by Bank, without any additional cost, as a service support to Bank.

    (h) OEM to have presence in India since Last 10 years. 22. Opening of Offers

    Technical Bid Offers will be opened on 29.10.2019 at 03:30 pm by Committee of Executives / Officers. The Bidders/ their representatives(s) may be present at the time of opening of the Technical Bid Offers. No separate intimation will be sent in this regard to the System Integrator for deputing their representatives. The Technical Bid offers will be opened at the time and date stipulated above irrespective of the number of bidders or their representatives present. Financial Bids will be opened of only those System Integrator who qualify technically.

    23. Single Point of Contact & Direct Support

    The bidder should provide the details of single point of contact and also Escalation matrix for support.

    24. Set-off

    a. Without prejudice to other rights and remedies available to BANK, BANK shall be entitled to set-off or adjust any amounts due to BANK under this project from the Service Provider against payments due and payable by Bank to the Service Provider for the services rendered.

    b. The provisions of this Clause shall survive even after termination of the Agreement.

  • Seal & Signature of Bidder Page 16 of 43

    25. Covenants of the successful bidder:

    1. The successful bidder shall deploy and engage suitably experienced and competent

    personnel as may reasonably be required for the performance of the services. During the

    currency of project , the successful bidder shall not substitute the key staff identified for

    the services

    2. The successful bidder shall forthwith withdraw or bar any of its employee/s from the

    provision of the services if, in the opinion of BANK:

    (i) The quality of services rendered by the said employee is not in accordance with the

    quality specifications stipulated by BANK; or

    (ii) The engagement or provision of the services by any particular employee is prejudicial to the interests of BANK.

    3. All employees engaged by the successful bidder shall be in sole employment of the

    successful bidder and the successful bidder shall be solely responsible for their salaries,

    wages, statutory payments etc. That under no circumstances shall BANK be liable for any

    payment or claim or compensation (including but not limited to compensation on account

    of injury/death/termination) of any nature to the employees and personnel of the Service

    Provider.

    4. The successful bidder :

    shall be responsible for all negotiations with personnel relating to salaries and benefits, and shall be responsible for assessments and monitoring of performance and for all disciplinary matters.

    shall not knowingly engage any person with a criminal record/conviction and shall bar any such person from participating directly or indirectly in the provision of services under this Agreement.

    shall at all times use all reasonable efforts to maintain discipline and good order amongst its personnel.

    shall not exercise any lien on any of the assets, documents, instruments or material belonging to BANK and in the custody of the Service Provider for any amount due or claimed to be due by the Service Provider from BANK.

    shall regularly provide updates to BANK with respect to the provision of the services and shall meet with the personnel designated by BANK to discuss and review its performance at such intervals as may be agreed between the Parties.

    shall be responsible for compliance of all laws, rules, regulations and ordinances applicable in respect of its employees, sub-contractors and agents (including but not limited to Minimum Wages Act, Provident Fund laws, Workmen's Compensation Act) and shall establish and maintain all proper records including, but not limited to, accounting records required by any law, code, practice or corporate policy applicable to it from time to time, including records and returns as applicable under labour legislations.

    shall not violate any proprietary and intellectual property rights of BANK or any third party, including without limitation, confidential relationships, patent, trade secrets, copyright and any other proprietary rights in course of providing services hereunder.

  • Seal & Signature of Bidder Page 17 of 43

    shall ensure that the quality and standards of materials and services to be delivered or rendered hereunder, will be of the kind, quality and timeliness as designated by the BANK and communicated to the Service Provider from time to time.

    shall not work in a manner which, in the reasonable opinion of BANK , may be detrimental to the interests of BANK and which may adversely affect the role, duties, functions and obligations of the successful bidder as contemplated by this RFP .

    shall be liable to BANK for any and all losses of any nature whatsoever arisen directly or indirectly by negligence, dishonest, criminal or fraudulent act of any of the representatives and employees of the successful bidder while providing the services to the BANK.

    shall itself perform the obligations under this RFP and shall not assign, transfer or sub-contract any of its rights and obligations under this Agreement except with prior written permission of BANK.

    26. INDEMNITY

    1. The successful bidder shall, at its own expense, indemnify, defend and hold harmless

    BANK and its officers, directors, employees, representatives, agents respective directors,

    and assigns from and against any and all losses and liability (including but not limited to

    liabilities, judgments, damages, losses, claims, costs and expenses, including attorneys

    fees and expenses) that may be occurring due to, arising from or relating to:

    a) a breach, non-performance or inadequate performance by the successful bidder of any of the terms, conditions, covenants, representations, undertakings, obligations or warranties under this Agreement ; or

    b) the acts, errors, representations, misrepresentations, willful misconduct or negligence of the successful bidder , its employees in performance of its obligations under this Agreement; or

    c) any deficiency in the services of the successful bidder or

    d) Violation of any applicable laws by the successful bidder, its agents, employees, representatives etc.

    2. In the event of successful bidder not fulfilling its obligations under this clause within the

    period specified in the notice issued by the Bank, Bank has the right to recover the

    amounts due to it under this provision from any amount payable to the vendor under this

    project.

    3. The indemnities under this clause are in addition to and without prejudice to the

    indemnities given elsewhere in this agreement.

    27. Termination

    1. Bank shall have the option to terminate this RFP and / or any subsequent agreement and

    / or any particular order, in whole or in part by giving Vendor at least 90 days prior notice

    in writing. It is clarified that the Vendor shall not terminate this RFP & the subsequent

    Agreement for convenience.

    2. However the Bank will be entitled to terminate this RFP and any subsequent agreement,

    if Vendor breaches any of its obligations set forth in this RFP and any subsequent

    agreement and

  • Seal & Signature of Bidder Page 18 of 43

    Such breach is not cured within thirty (30) Working Days after Bank gives written notice; or

    if such breach is not of the type that could be cured within thirty (30) Working Days, failure by Vendor to provide Bank, within thirty (30) Working Days, with a reasonable plan to cure such breach, which is acceptable to the Bank. Or

    3. This Tender and subsequent Agreement shall be deemed to have been terminated by

    either Party one day prior to the happening of the following events of default:

    The other Party becomes unable to pay its debt as they fall due or otherwise enters into any composition or arrangement with or for the benefit of its creditors or any class thereof;

    A liquidator or a receiver is appointed over all or a substantial part of the undertaking, assets or revenues of the other Party and such appointment continues for a period of twenty one (21) days;

    The other Party is subject of an effective resolution for its winding up other than a voluntary winding up for the purpose of reconstruction or amalgamation upon terms previously approved in writing by the other Party; or

    The other Party becomes the subject of a court order for its winding up.

    4. The Bank, by written notice of default sent to the Vendor, may terminate this Contract in whole or in part without prejudice to any other remedy for breach of Contract if the Vendor fails to deliver any or all of the Design, Goods, Works and Services, within the period(s) specified in the Contract or within any extension thereof granted by the Bank

    5. Upon the termination or expiry of this Tender and subsequent Agreement the rights

    granted to Vendor shall immediately terminate.

    6. In the event the Bank terminates the Contract in whole or in part, the Bank may, among

    other applicable remedies, procure Goods, Works or Services similar to those undelivered

    upon such terms and in such manner as it deems appropriate, and hold the Vendor liable

    to the Bank for any excess costs for such similar Goods, Works or Services. However, the

    Vendor shall continue to perform the Contract to the extent not terminated.

    28. Governing Laws

    The subsequent contract shall be governed and construed and enforced in accordance

    with the laws of India applicable to the contracts made and to be performed therein, and

    both Parties shall agree that in respect of any dispute arising upon, over or in respect of

    any of the terms of this Agreement, only the courts in Jaipur shall have exclusive

    jurisdiction to try and adjudicate such disputes to the exclusion of all other courts.

    I have read and accept, all terms/conditions/criteria other aspects mentioned in this document unconditionally.

    Signature ………………….. (Authorized signatory/director of the Service Provider)

  • Seal & Signature of Bidder Page 19 of 43

    Annexure-I

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR EMPANELMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE)

    (On company letter head) Ref No. Date: To General Manager Bank of Baroda Zonal Office Jaipur Zone Dear Sir, With reference to the above tender notice, having examined and understood the instructions, terms and conditions forming part of the tender forms, we hereby enclose our offer for the supply of the security equipments as detailed in your above referred tender notice. We are applying for SITC and Maintenance of following security equipment in the branches and offices of your Zone.

    Sr. No Security Equipments to be provided (Yes / No)

    1. CCTV System

    2. IP Based Hybrid Alarm System

    We certify that we have carried out similar work of supply and maintenance of security equipment having executed cumulative order of following values during one financial year of last -5- years as on 31.09.2019.

    Sr Security Equipment Value of work executed

    1 CCTV

    2 Alarm System

    3 Fire Alarm System

    4 IP Based Hybrid Alarm System

    Copies of Invoices / Experience Certificate / Performance Certificate etc. to this effect are attached along with this letter. We confirm that our Annual Turnover for last three years is as under:-

    SN Year Turnover

    01 2016 -17

    02 2017-18

    03 2018-19 I/We am/are aware that the empanelment does not guarantee any work order. In the event of getting a contract, I/We agree to honor the obligation with due diligence and efficiency as required by the Bank of Baroda.

  • Seal & Signature of Bidder Page 20 of 43

    In the event of getting a contract, I/We agree to honor the obligation with due diligence and efficiency as required by the Bank. We confirm that we have not been disqualified / blacklisted by any Govt. Deptt / RBI / PSU bank or any other organization for supply and maintenance of any security Systems. We also confirm that, in the past we have not been issued with any dissatisfactory letter by any of the Regions /Branch of Jaipur Zone. We also agree that in case any poor performance is received from any of our clients our Bid will be rejected / disqualified. We further confirm that the offer is in conformity with the terms and conditions as mentioned in the tender form. We also confirm that the offer shall remain valid for 180 days from the last date for submission of the offer. We understand that the Bank is not bound to accept the offer either in part or in full and that the Bank has the right to reject the offer in full or in part without assigning any reason whatsoever. We certify that ……………………………………… (Name of System Integrator) is not owned or controlled by any Director or serving Officer/Employees of Bank of Baroda or their relatives having the same meaning as assigned under section 6 of the Companies Act, 1956. We agree to provide required performance guarantee at the Zone. We also confirm that the Zone has not issued any disqualification letter to our Agency in the past. I/We agree to all the terms and conditions of the notice. We enclose herewith a Demand Draft/Pay Order for Rs 5000/- (Non –refundable) and Rs.2.50 Lacs (Refundable) favoring Bank of Baroda and payable at Jaipur, towards tender fees and Earnest Money Deposit, details of the same are as under: Demand Draft/Pay Order No. : Date of Demand Draft/Pay Order : Name of Issuing Bank : We are offering bid for following products :-

    S N

    Product Make Remarks

    01. CCTV System

    02. Integrated Hybrid IP based Alarm System

    We also confirm that the above products meet the Technical specifications/ features, as per the RFP. Yours faithfully,

    Authorized Signatories (Name & Designation, seal of the firm) E-Mail address Contact No

  • Seal & Signature of Bidder Page 21 of 43

    Annexure –II

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN ________________ ZONE

    FORMAT OF THE APPLICATION FORM

    PART - I SUPPLIER’S PROFILE

    SN ITEM PARTICULARS Proof / details to be attached as (with proper Flags)

    1 Name of the Company/ Firm/ Organization, Website, Email

    Annexure A

    2 Year of Establishment and Incorporation

    Annexure B

    3. Status of the firm whether Company/Firm/proprietary etc

    Annexure C

    a) Registered under the Companies Act, 1956. If so mention registration number and date.

    b) Registered under the Societies Registration Act, 1860. If so mention registration number and date.

    c) Registered under the Indian Trust Act, 1882. If so mention registration number and date.

    d) Sole proprietorship firms whose proprietor is a resident in India as per the Income Tax Act, 1961. If so mention registration number and date.

    e) Partnership firm registered in India. If so mention registration number and date.

    4 Nature of Business. Whether OEM /System Integrator/Manufacturer/

    Authorized dealer/supplier etc

    Annexure D

    5 Address of Registered Office with PIN Code.

    Annexure E

  • Seal & Signature of Bidder Page 22 of 43

    6 Correspondence Address Annexure F

    7 Address of Manufacturing

    Unit/R&D Site

    Annexure G

    8 Name of Directors/

    Partners/Members etc

    (a) (b)

    Annexure H

    9 a) Name of contact person(s) b) Mobile Numbers(s) c) Land Line

    Annexure I

    10 Name of person(s) authorized to conduct business along with Mobile, Tele, Fax and Email details

    Annexure J

    11 a) Has your company/firm been ever blacklisted in past 5 years. Give details if Yes.

    Annexure K

    b) If No, a certificate be submitted stating that the company/firm or its owner or any sister concern have not been so blacklisted by any institution of the Central or State Govt, PSU/PSBs in the past 5 years on any grounds whatsoever.

    Annexure L

    12 Any subsidiary company (Write Yes / No).

    Give all details if yes

    Annexure M

    13 Furnish the names of three responsible persons who will be in a position to certify about the quality as well as past performance of your organization. Annexure N

    Sr. No

    NAME Address Contact Number

    a)

    b)

    c)

  • Seal & Signature of Bidder Page 23 of 43

    Annexure-III

    PART II- FINANCIAL, REGISTERATION FOR TAXATION AND OTHER STATUTORY

    REQUIREMENTS

    Sr. NO

    ITEM PARTICULARS Proof / details to be attached as (with proper Flags)

    1 Whether registered for the following and having necessary certificates/ authority?

    If so, mention registration number and date.

    Enclose relevant certificate/

    Application Documents

    Annexure O

    a) Income Tax PAN

    b) TIN

    c) ESIC

    d) EPF

    e) GST

    2. Furnish copies of audited Balance Sheet and profit & loss account(audited) for the last 3 financial years

    TURN OVER (CA certificate is mandatory & in original)

    (CA

    Profit after Tax (INR Lacs)

    Annexure P

    a) 2016-17-Turnover

    b) 2017-18 –Turnover

    c) 2018-19 –Turnover

    3. Name and address of Bankers along with IFS Code

    Bank Name Address IFSC Code

    Annexure Q

  • Seal & Signature of Bidder Page 24 of 43

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE).

    (Letter to the bank on the OEM’s Letterhead in Original)

    To, The General Manager Bank of Baroda Zonal Office Jaipur Zone

    Dear Sir, Subject: Authorization for Supply, Installation, Implementation, commissioning and Maintenance of CCTV Surveillance System / Hybrid IP Based Alarm System. We _____________________ registered office at ___________________ having joint venture / authorized dealer etc. with ________________, who are established and leading manufacturer of Digital Video Surveillance products, do hereby authorize M/s ____________________ having their registered office at____________________________________________________________________ to submit quote, negotiate, supply, install and provide after sales support for our range of under mentioned products quoted by them to meet the above mentioned tender:- Sr.No Product Company Model No. Remarks

    01. CCTV System

    02. Anti Burglary Alarm System with Integrated Auto Dialer

    03. Fire Alarm System

    04. Hybrid IP Based Alarm System

    Our total installation for the security system in last -3- years are as under:- (upto 30June 2019)

    SN Item No of Installations

    01 CCTV

    02 Alarm System

    03 Fire Alarm System 04 Hybrid IP Based Alarm System

    We also confirm that the above products meet the Technical specifications/ features as per the RFP.

    We as OEM are responsible that the System Integrator uses genuine products. We will conduct Audit of the products being installed by the System Integrator, as and when required by the Bank without any extra cost, as a service support to the Bank.

  • Seal & Signature of Bidder Page 25 of 43

    We hereby confirm to extend our back to back technical support and meet warranty terms of 2/3 years as the case may be. Also, we as an OEM assure that the quoted models are not end of life and necessary spares would be provided at cost to bidder for period of five years, as per OEM standards for this tender/project. We will submit a certificate annually on 31st March for the total number of installation of new security equipment for Bank of Baroda to the agency.

    Thanking you,

    Yours faithfully,

    Authorised Signatories (Name & Designation, seal of the OEM) Contact No. E-Mail Address

  • Seal & Signature of Bidder Page 26 of 43

    Annexure IV NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE).

    WORK & BUSINESS EXPERIENCE AND PROPOSAL FOR EQUIPMENT FOR ENGAGEMENT

    1 Existing Panel of BANK . Give names of Zones where providing services along with relevant performance certificates/Letters

    a)

    b)

    c)

    d)

    DETAILS OF COMPLETED WORK IN LAST THREE YEARS (FROM 01/04/2016 TO 31/03/2019)

    DETAILS OF ENGAGEMENT WITH FINANCIAL INSTITUTIONS (FIs)

    Sr. No

    Name of the FI Date Since

    Empanelled

    / Providing

    services

    Security Equipment Being

    Supplied

    Satisfactory Completion certificate attached

    (as Annexures)

    1

    2

    3

    NAME AND ADDRESS

    OF THE FI

    DATE OF

    INSTALLATION NUMBER OF SECURITY SYSTEM

    CCTV ALARM

    SYSTEM

    FIRE ALARM

    SYSTEM IP Based Hybrid Alarm System

    Total Systems Installed

  • Seal & Signature of Bidder Page 27 of 43

    1. Enclose relevant documentary proof as annexure.

    2. Following certificate/undertaking to be submitted with the application documents

    CERTIFICATE

    Certified that all the information given above and in all documents submitted for engagement with Bank of Baroda for Security Equipment is true to the best of my/our knowledge. It is understood that in case any claim/information is found to be incorrect the application shall be rejected or if found after engagement the bank may blacklist and take other legal action.

    Date:

    Place: Signature

    Name :

    Designation :

    Stamp of the Company/Firm (Authorized representative)

    Note: Please add rows where required. Where copies of Application Documents/certificates are

    required to be furnished these are to be certified true copies

  • Seal & Signature of Bidder Page 28 of 43

    Annexure – V

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF

    SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE (RAJASTHAN STATE).

    COMPLIANCE CONFIRMATION (Attach OEM’s Brochure)

    TECHNICAL SPECIFICATION FOR 4/8/16 CHANNEL STAND ALONE PENTABRID CCTV SYSTEM (XVR)

    Sr No

    Parameters Specifications Compliance Yes / NO

    Company

    Model

    1

    Video compression

    4-Channel 8- Channel 16 –Channel

    H.265 Pro+/ H.265 + / H.265/

    2 Analog and HD-TVI video input

    4-Channel 8- Channel 16 –Channel

    BNC interface (1.0Vp-p, 75 Ω)

    3 Supported camera types

    AHD, TVI,CVI, Existing Analog Camera, IP (ONVIF), /4 MP/3 MP/ 720P/25, 720P/30, 720P/50, 720P/60, 1080P/25, 1080P/30,

    CVBS cameras,

    4

    IP video input

    EXTRA 4-IPC Input (total upto 8 channel)

    EXTRA 4 IPC Input (total upto 12 channel)

    EXTRA 8 IPC Input (total upto 24

    Channel)

    Up to 6.0MP resolution

    5 Audio compression

    G.711u

    6 Audio input / Two-way audio

    in

    4-Channel 8- Channel 16 –Channel

    (2.0 Vp-p, 1 KΩ), 4 Audio inputs

    7 HDMI / VGA output

    1920 × 1080 / 60 Hz,1280 × 1024 / 60 Hz, 1280 × 720 / 60 Hz, 1024 × 768 / 60 Hz

    8

    Encoding resolution

    Main stream: 1080P(non-real-time) / 720P / VGA / WD1 / 4CIF / CIF

    Sub-stream: WD1 / 4CIF(real-time) / CIF / QCIF / QVGA

    9

    Frame rate

    Main stream: 1/16 fps ~ Real time frame rate

    Sub-stream: 1/16 fps ~ Real time frame rate

    10 Video bitrate 32 Kbps-6 Mbps

    11 Audio output 1-ch, RCA (Linear, 1KΩ)

    12 Audio bitrate 64 Kbps

    13 Dual-stream Support

    14 Stream type Video, Video & Audio

    15 Synchronous Playback

    Resolution

    4-Channel 8- Channel 16 –Channel

    4MP/3MP/1080P / 720P / VGA / WD1 / 4CIF / CIF / QVGA / QCIF

    16 Network protocols

    TCP/IP, PPPoE, DHCP, EZVIZ Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS

    17 SATA 2 SATA interface (Each SATA to support upto 8 TB) for 4 Channel 4 SATA interface (Each SATA to support upto 8 TB) for 8 & 16

    Channel

    18 Capacity 4-Channel 8- Channel 16 –Channel

    2 TB HDD 4 TB HDD 6 TB HDD

  • Seal & Signature of Bidder Page 29 of 43

    19 E SATA 1 PORT for 8 & 16 Ch

    20

    Network 4-Channel 8- Channel 16 –Channel

    interface

    1; 10M / 100M self-adaptive Ethernet interface

    1; 10M / 100M / 1000M self-

    adaptive Ethernet interface

    21 Serial interface 1; standard RS-232 serial interface, RS 485 half-duplex

    22 USB port 2 × USB 2.0 Ports

    23 Alarm in / out 4 INPUT / 1 OUTPUT 8 INPUT / 4 OUTPUT

    16INPUT / 4 OUTPUT

    24 Power supply 12V DC

    25 Consumption (without hard

    disks)

    ≤ 15W ≤ 20W ≤ 30W

    26 Working temperature

    -10 ºC ~+55 ºC (14 ºF ~ 131 ºF)

    27 Working humidity 10% ~ 90%

    28 Chassis 1U chassis 380mm 1U chassis

    29 Certifications UL,CE,FCC , ROHS, BIS

    30 Recording Resolution

    4MP/3MP/1080p/ 720p/ VGA/ WD1/ 4CIF/ CIF/ QVGA/ QCIF

    31 Record Rate- Main Stream

    1080p/ 720p/ VGA/ WD1/ 4CIF/ CIF/ QVGA/ QCIF (1/16 fps to Real-time frame rate)

    32 Record Rate- Extra Stream

    WD1/ 4CIF/ CIF/ QCIF/ QVGA (1/16 fps to Real-time frame rate)

    33 Record Mode Manual/ Schedule/ Motion detection

    34 Privacy Masking Supported

    35 OSD Camera Title, Time, Vide Loss, Recording, Motion Detection

    36 Remote Yes, IR

    37 Smart Function Video Content Analytics) events for both analog and smart IP cameras

    38 Analytics Function Line crossing detection and intrusion detection By DVR

    39 3rd Party Cloud Storage

    Should Support the 3rd party cloud storage (Dropbox/Google Drive/Microsoft OneDrive).

    40 Accepted Make/Brand

    Hikvision/ Dahua/LG/ Samsung / HONEYWELL or Equivalent

  • Seal & Signature of Bidder Page 30 of 43

    VARIFOCAL HD True WDR IR BULLET CAMERA

    Sr. Parameters Specifications Compliance (Yes/NO) No

    Company

    Model

    1 Image Sensor 2.0MP 1/3” CMOS Image Sensor

    2 Effective Pixels 1920(H)*1080(V)

    3 Min. Illumination 0.005 Lux @(F1.2,AGC ON), 0 Lux with IR

    4 Shutter Time 1/25(1/30) s to 1/50,000 s

    5 Lens 2.7mm - 13 mm @ F1.4

    Motorized vari-focal lens

    Angle of view: 97° - 30.4°

    6 Lens Mount φ14

    7 Angle Adjustment Pan: 0 - 360°, Tilt: 0 - 75°, Rotation: 0 - 360°

    8 Day & Night Auto with IR CUT FILTER

    9 Synchronization Internal synchronization

    10 Video Frame Rate 720p@25fps/720p@30fps

    11 HD Video Output 4 in 1 video output (switchable TVI/AHD/CVI/CVBS)

    12 CVBS Output Can Connect to any existing or HD DVR

    13 WDR (Wide Dynamic Range) >120dB

    14 Working Temperature/Humidity

    -40 °C to +60 °C(-40 F - 140 F)

    Humidity 90% or less (non-condensing)

    15 Power Supply 12V DC±15%

    16 Power consumption 4.7 W maximum

    17 Weather Proof Ratings IP67

    18 Vandal Proof rating IK10

    19 IR Range Minimum 60 meters

    20 Certifications UL,CE,FCC , ROHS, BIS

    21 Accepted Make/Brand Hikvision/ Dahua/LG/ Samsung / HONEYWELL or Equivalent

  • Seal & Signature of Bidder Page 31 of 43

    VARIFOCAL IP True WDR IR Outdoor Bullet CAMERA

    Sr. Parameters Specifications Compliance (Yes/NO) No

    Company

    Model

    1 Video standards H.264 / MPEG4 / MJPEG

    2 Sensor 1/3 or 1/2.8 inch Progressive scan CMOS

    3 Scanning Progressive Scan system

    4 System Compatibility ONVIF(Profile G,S), ISAPI

    5 Resolution 1980x1080

    6 Signal Stream Triple Stream

    7

    Frame Rate 25fps (1920 × 1080), 25fps (1280 × 960), 25fps (1280 × 720)

    8 Lens 2.8 ~ 12mm motorized Lens

    9

    Minimum Illumination 0.01 [email protected];

    0 lux with IR

    10 IR Cut Filter Yes

    11 Wide Dynamic Range 120dB

    12 Digital noise reduction 3D DNR

    13 Day & night ICR

    14 AGC Yes

    15 BLC/HLC Yes, Zone Configurable

    16 Iris control DC drive

    17 Intelligent Video Functions

    Alarm trigger for Video quality detection, line crossing, Intrusion detection, Face Detection , Region of Interest

    18 Intelligent Video Functions Scene change detection, audio exception detection

    19 IR Range Up to 40m

    20 Protocols TCP/IP, HTTP, HTTPS, FTP, DHCP,

    DNS, DDNS, RTP, RTSP, RTCP, PPPoE,

    NTP, UPnP, SMTP, SNMP, 802.1X,

    IPv6, IPv4,NTP, UPnp, IGMP,Bonjour

    21 Ethernet 1 RJ45 10M / 100M Ethernet port

    22 Input voltage 12 VDC ± 10% or PoE, IEEE 802.3 af

    23 General Function: One-key reset, Anti-Flicker, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering

    24 Operating Temp. -30°C ~ 60°C

    25 Operating Humidity Humidity 95% or less (non-condensing)

    26 Alarm trigger Motion detection, tampering alarm, network disconnect, IP address conflict, storage exception

    27 Interface Audio : 1 input (line in/mic.in, 3.5 mm), 1 output (line out, 3.5 mm), mono sound

    Alarm : 2 input,2 output (up to 12 VDC, 30 mA), terminal block

    Video Output : 1Vp-p Composite Output(75Ω/BNC)

    28 Security Watermark, User authentication, IP address

    Filtering, anonymous access.

    29 Housing & Mount IP67 outdoor standard

  • Seal & Signature of Bidder Page 32 of 43

    30 Certification UL,CE,FCC , ROHS, BIS

    31 Required Make [any one make should be

    specified]

    Hikvision, Dahua Samsung, LG, Honeywell or Equivalent

    FIXED HD True WDR IR DOME CAMERA Ultra low light

    Sr. Parameters Specifications Compliance (Yes/NO) No

    Company

    Model

    1 Image Sensor 2.0MP 1/3” CMOS Image Sensor

    2 Effective Pixels 1920(H)*1080(V)

    3 Min. Illumination 0.005 Lux @(F1.2,AGC ON), 0 Lux with IR

    4 Shutter Time 1/25(1/30) s to 1/50,000 s

    5 Lens 2.8mm/ 3.6mm

    Angle of view: 106°(2.8 mm), 82°(3.6 mm)

    6 Lens Mount M12

    7 Angle Adjustment Pan: 0 - 360°, Tilt: 0 - 75°, Rotation: 0 - 360°

    8 Day & Night Auto with IR CUT FILTER

    9 Synchronization Internal synchronization

    10 Video Frame Rate 1080p@25fps

    11 HD Video Output 4 in 1 video output (switchable TVI/AHD/CVI/CVBS)

    12 CVBS Output Can Connect to any existing or HD DVR

    13 WDR (Wide Dynamic Range) >120dB

    14 Working Temperature/Humidity

    -40 °C to +60 °C(-40 F - 140 F)

    Humidity 90% or less (non-condensing)

    15 Power Supply 12V DC±15%

    16 Power consumption 4.6 W maximum

    17 Weather Proof Ratings IP67

    18 Vandal Proof rating IK10 Metal/Vandal proof Body only Accepted

    19 IR Range Minimum 30 meters

    20 Certifications UL,CE,FCC , ROHS, BIS

    21 Accepted Make/Brand Hikvision, Dahua, LG, Samsung , Honeywell or Equivalent

  • Seal & Signature of Bidder Page 33 of 43

    FIXED IP True WDR IR DOME CAMERA WITH SD CARD SLOT

    Sr. Parameters Specifications Compliance (Yes/NO) No

    Company

    Model

    1 Video standards H.264 / MPEG4 / MJPEG

    2 Sensor 1/3 or 1/2.8 inch Progressive scan CMOS

    3 Scanning Progressive Scan system

    4 System Compatibility ONVIF(Profile G,S), ISAPI

    5 Resolution 1980x1080

    6 Signal Stream Triple Stream

    7 Frame Rate 25fps (1920 × 1080), 25fps (1280 × 960), 25fps (1280 × 720)

    8 Lens 2.8 Lens

    9 Minimum Illumination 0.01 [email protected]; 0 lux with IR

    10 IR Cut Filter Yes

    11 Wide Dynamic Range 120dB

    12 Digital noise reduction 3D DNR

    13 Day & night ICR

    14 AGC Yes

    15 BLC/HLC Yes, Zone Configurable

    16 Iris control DC drive

    17 Intelligent Video Functions Alarm trigger for Video quality detection, line crossing, Intrusion detection, Face Detection , Region of Interest and audio exception

    detection

    18 IR Range Up to 40m

    19 Protocols TCP/IP, HTTP, HTTPS, FTP, DHCP,

    DNS, DDNS, RTP, RTSP, RTCP, PPPoE,

    NTP, UPnP, SMTP, SNMP, 802.1X,

    IPv6, IPv4,NTP, UPnp, IGMP,Bonjour

    20 Ethernet 1 RJ45 10M / 100M Ethernet port

    21 Input voltage 12 VDC ± 10% or PoE, IEEE 802.3 af

    22 General Function: One-key reset, Anti-Flicker, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering

    23 Operating Temp. -30°C ~ 60°C

    24 Operating Humidity Humidity 95% or less (non-condensing)

    25 Local Storage Micro SD/SDXC card slot, up to 128GB Surveillance Grade

    26 Alarm trigger Motion detection, tampering alarm, network disconnect, IP address conflict, storage exception

    27 Security Watermark, User authentication, IP address

    Filtering, anonymous access.

    28 Housing & Mount IP67 outdoor standard

    29 Certification UL,CE,FCC , ROHS, BIS

    30 Required Make [any one make should be specified]

    Pelco, Bosch, Hikvision, Sony, Samsung, LG, Honeywell or Equivalent.

    mailto:[email protected]

  • Seal & Signature of Bidder Page 34 of 43

    TECHNICAL SPECIFICATIONS FOR 21.5” LED COLOUR MONITOR

    Sr. No

    Parameters Specifications Compliance (Yes/NO)

    Company

    Model

    1 Screen TFT-LED Backlight

    2 Screen Size 21.5” Monitor

    3 Resolution 1920 X 1080 Full HD Display

    4 Viewing Angle 170°(H)/160°(V)

    5 Video Input Mode HDMI, VGA

    6 On-Screen Display (OSD) Menu

    True Colour and User Friendly operation Menu

    7 Aspect Ratio Supports 16:9 or 4:3 aspect ratio selectable in OSD Menu

    8 Audio Built-In Speaker and Audio Amplifier Adopt 3D Noise Reduction Technology

    9 Mount VESA stand

    10 Certification ISI / CE / UL / FCC Certificate or any other standard certificate in the field

    11 Accepted Make/Brand Sony / LG / Samsung / Hikvision or Equivalent

  • Seal & Signature of Bidder Page 35 of 43

    Annexure – VI

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF HYBRID IP BASED ALALRM SYSTEM AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE(RAJASTHAN STATE).

    COMPLIANCE CONFIRMATION (Attach OEM’s Brochure)

    TECHNICAL SPECIFICATION FOR HYBRID IP BASED ALARM SYSTEM:

    Sl. No.

    ITEM ITEM DESCRIPTION WITH REMARKS/ COMMENTS

    Make/Model

    Compliance

    (Yes/No)

    1 CONTROL PANEL with KEYPAD and Battery. The Hybrid Alarm Panel should have the following capabilities:-

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    Hybrid Security Alarm Panel (wired & wireless) with SMPS based power supply. Compatible with IP/PSTN communicators. With on board keypad

    and support additional keypads if required.

    A) Support at least inbuilt 8 wired inputs

    onboard, expandable to 48/4 outputs onboard expandable to 48 /32, Should Support up to 40 wireless zones, PSTN Inbuilt keypads /32 keyfobs

    /PSTN+Wired IP+GPRS (sufficient to meet Banks requirement) B) Should have 12V 7AH Battery enclosed. C) Tamper switch on Control Panel with SMPS. D) Should support 50 User Codes. E) Wired IP, multi alarm upload strategy, enhance system reliability. F) Arming/disarming by keypad, keyfob, and software, convenient and faster.

    TCP/ IP communicator should enable two way Data Transmition ,communication between alarm

    monitoring software & programming

    1. Monitoring Alarms 2. Program by software, easy

    installation and operation 3. Maintenance & Health Check

    Should have minimum 500 event log to keep track of all events and Authority levels.

    HW/ Wireless expansion–Anytime expansion with help of expansion module/ wireless receiver, seamless expansion.

    1) Small Cabinet, tamper switch Phone line monitor – Alerts locally if PSTN is disconnected.

    2) SMPS Power Supply SMPS based power supply suiting power conditions in India. Transformer Based Power Supply not accepted.

    3) Key Pad LCD Keypad panic – Configurable panics for different situations, with duress & Dual custodian feature

    Scheduling/ Auto stay Arming – Automatic arming at a specific time & other events.

    Cross Zoning – False Alarm reduction, Supports arming and disarming by swiping cards, Supports displaying zone name on the LCD screen

    Supports displaying the real-time zones status and events by LCD screen, Supports displaying the real-time system status by LED indicator

  • Seal & Signature of Bidder Page 36 of 43

    System should be capable of minimum 4 partitioned/ configured to be independent systems to avoid interference of different

    users, separate partition for - Branch, Strong Room, ATM site & critical area.

    Wireless Expander

    RS485, 433MHz Wireless Receiver, 8 Wireless inputs, 32 Wireless Keyfob

    Hikvision/ Texecom/ Securico

    or equivalent

    2. Inbuilt Auto-dialler To be integrated/ mounted next to Control Panel. Should be able to call 10 Nos. with separate messages for Fire/ Intrusion/ Panic, any other emergency – fully customized. Password protected and Should be able Configure/Add/Delete Mobile Numbers remotely.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    3 WIRED SENSORS

    3(i) Wired - Vibration Sensor cum magnetic contact Wired vibration sensor cum magnetic contact to be installed on the Strong Room Door thus protecting from any shock based intrusion or opening of door.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    Sensor should support Blue Wave Technology, also act as repeater, complete range adjustable vibration sensor.

    3(ii) Wired Panic Switches At various critical locations [BM, ABM, Cash Cabin & Single Window]

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    3(iii) Wired Shutter contact For Heavy duty full metal alloy Rolling Shutter contact with 4 wire tamper, wire cut protection.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or

    equivalent

    3(iv) Wired – Optical Smoke Detectors For Banking Hall, Cabin, Record Room, ATM cabin

    System Sensor/ Appolo/

    Siemens/ Hikvision or equivalent

    3(v) Wired – Heat Detector For UPS & Battery enclosure System Sensor/ Appolo/

    Siemens/ Hikvision or equivalent

    3(vi) Wired – Manual Call Point Banking Hall (staff area) System Sensor/ Ravelle/Agni/ Hikvision or equivalent

    3(vii) Wired – Duel technology motion sensor Motion Sensor with Dual technology – Micro wave technology and Passive IR technology.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or

    equivalent

  • Seal & Signature of Bidder Page 37 of 43

    3(viii) Wired Metal Sounder & Flasher for Outside Bank 1. The sounder should be Triple

    Tamper Detection - Inner Cover Tamper, Lid Tamper & Wall Tamper

    2. The sounder should be IP65 rated for environmental protection.

    3. The sounder should have 1.5mm Galvanized Steel Enclosure inside.

    4. The sounder should be of 109dB volume.

    5. The sounder should have inbuilt rechargeable Battery 7.2VDC, 320mAh

    6. The sounder should be Wall, Lid and Screw tamper protected.

    7. The sounder should have a built in battery backup.

    8. The sounder should have battery monitoring with fault output.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    3(ix) Wired Fire Sounder for Inside Bank 1. The sounder should be more than 105dB volume.

    Klaxon/ Texecom/GE/

    Honeywell Hikvision or equivalent

    3(X) Vault Seismic Shock Sensor for Bank Vault 1. Multiple destruction methods to be

    detected: impact drill, electric drill,

    gas cutting, shock, explosion, etc.

    2. high temperature resistance 3. Shock times range: 3 to 6

    4. Low voltage alarm and tamper

    alarm

    Klaxon/ Texecom/GE/

    Honeywell Hikvision or equivalent

    4 WIRELESS SENSORS

    4(i) Wireless Pet Immune Motion Sensors In front of strong room door/ATM.

    Texecom/GE/ Honeywell/ Securico/

    Hikvision or equivalent

    Pet Immune Motion Sensor should support Bluewave Technology, 3 LED indicator, AES-128 encryption, Tamper protection: front, rear and bracket, Sensor should have tamper detection capability, digital temperature compensation, Sensor should have battery life of 2 – 3 years

    4(ii) Wireless Panic Switch Wireless panic button to be installed at ATM site, AES-128 128 encryption, Singnal Strength Indicators(SSI) Texecom/GE/

    Honeywell/ Securico/

    Hikvision or equivalent

    (Double push panic button with auto reset option)

    Panic buttons should have various mounting option with auto reset.

    Sensor should support Bluewave Technology, two way wireless, Tamper protection.

    CONDUIT & CABLING

    5 2 Core cable Multi strand 2 core cables for wired sensors & Hooters

    Polycab/Finolex/ Havells or

    equivalent

    6 1.5 sq.mm FRLS cable Unarmoured cable for Fire Alarm

    7 PVC conduit For casing capping – ISI Mark ISI Mark

    CENTRAL MONITORING SOFTWARE

    8 Central Monitoring Software CMS should facilitate central monitoring, remote maintenance, remote programming and wireless diagnostics.

    The Security Alarm panel should have the capability to connect to software based alarm receiver interface.

    The alarm system should be capable of being integrated with third party monitoring software.

    Software should be able to take backup after 3 months as per the bank requirement.

  • Seal & Signature of Bidder Page 38 of 43

    INSTALLATION & TESTING

    9 Installation & Testing IP connectivity with CMS at Bank will be established by the vendor.

    The CMS should give real time alerts of events in respect of all connected sensors. (wired/ wireless)

    Report of all events generated on daily/ weekly basis

    Report of branches closed/ open before scheduled time

    In case of non-receipt of closing signal from alarm panel a pop should be available for CMS staff to call the branch & arm/ secure the alarm system.

  • Seal & Signature of Bidder Page 39 of 43

    Annexure-VII COMMERCIAL OFFER

    NOTICE INVITING REQUEST FOR PROPOSAL (RFP) FOR ENGAGEMENT OF SYSTEM INTEGRATOR OF REPUTE FOR SUPPLY, INSTALLATION, TESTING, COMISSIONING AND ANNUAL MAINTENANCE OF SECURITY EQUIPMENTS AT DIFFERENT BRANCHES/OFFICE/INSTITUTIONS OF BANK IN JAIPUR ZONE(RAJASTHAN STATE).

    (Refer Annexure –V for Technical Specification)

    A- Package Cost of CCTV (Exclusive of GST)

    Sr No

    Item Make/Brand Model

    Unit Qty

    Rates quoted per

    Unit Total Cost

    1 SITC of 8 channel XVR, 4 Nos. of HDD slot (4 SATA) including 4 TB x 2 Nos. = 8 TB HDD for 90 days storage of data as per technical specifications.

    No. 1

    2 SITC of 2.0 MP Fixed HD True WDR IR DOME CAMERA as per technical specifications Including power supply

    Nos. 3

    3 SITC of 2.0 MP Fixed IP True WDR IR DOME CAMERA WITH SD CARD SLOT as per technical specification Including power supply

    Nos. 3

    4 SITC of 2.0 MP VARIFOCAL HD True WDR IR BULLET CAMERA as per technical specifications Including power supply

    Nos. 1

    5 SITC of 2.0 MP VARIFOCAL IP True WDR IR Outdoor Bullet CAMERA as per technical specifications Including power supply

    Nos. 1

    6 SITC of 21" Full HD LED Monitor including HDMI Cable & Wall Mounting Stand as per technical specifications

    No. 1

    7 SITC of RG 59 Video Cable as per technical specifications

    Mtrs. 75

    8 SITC of Iron Rack (6U

    Housing)for DVR

    No. 1

  • Seal & Signature of Bidder Page 40 of 43

    9 SITC of 2 Core x 1.5 sqmm Power Cable (ISI Mark), in 20 mm PVC Conduit as per technical specifications

    Mtrs. 75

    10 SITC of CAT -6 cable as per technical specifications

    Mtrs. 75

    11 Wireless Mouse No. 01

    12 Visit charges during

    warranty period

    Per Quarter

    Total including wiring, duties, levies, transport, transit insurance, loading-unloading, installation charges LAN connectivity etc. with inclusive of 3 years comprehensive warranty.

    Total (exclusive of taxes)- Quoted Amount Rs.

    (In Words ………………………………………………………………………………………………………….)

    B: Cost of CAMC – Existing CCTV System

    Sl. No. Year

    Comprehensive AMC (Quarterly) Rat