Embed Size (px)
Citation preview
Withdrawn standards Projects deleted (last 12 months) Bottom of Form
Standard and/or project Stage TCISO 4301-2:2009Cranes -- Classification -- Part 2: Mobile cranes
60.60 TC 96/SC 6
ISO 4301-3:1993Cranes -- Classification -- Part 3: Tower cranes
90.92 TC 96/SC 7
ISO 4301-4:1989Cranes and related equipment -- Classification -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 4301-5:1991Cranes -- Classification -- Part 5: Overhead travelling and portal bridge cranes
90.93 TC 96/SC 9
ISO 4302:1981Cranes -- Wind load assessment
90.60 TC 96/SC 10
ISO 4304:1987Cranes other than mobile and floating cranes -- General requirements for stability
90.60 TC 96/SC 10
ISO/CD 4305Mobile cranes -- Determination of stability
30.99 TC 96/SC 6
ISO 4305:1991Mobile cranes -- Determination of stability
90.92 TC 96/SC 6
ISO 4306-1:2007Cranes -- Vocabulary -- Part 1: General
90.60 TC 96/SC 2
ISO 4306-2:1994Cranes -- Vocabulary -- Part 2: Mobile cranes
90.92 TC 96/SC 6
ISO/DIS 4306-2Cranes -- Vocabulary -- Part 2: Mobile cranes
40.99 TC 96/SC 6
ISO 4306-3:2003Cranes -- Vocabulary -- Part 3: Tower cranes
90.92 TC 96/SC 7
ISO 4306-3:2003/Amd 1:2011 60.60 TC 96/SC 7ISO 4306-5:2005Cranes -- Vocabulary -- Part 5: Bridge and gantry cranes
90.93 TC 96/SC 9
ISO 4310:2009Cranes -- Test code and procedures
60.60 TC 96/SC 4
ISO 7296-1:1991Cranes -- Graphic symbols -- Part 1: General
90.60 TC 96/SC 2
ISO 7296-1:1991/Amd 1:1996 60.60 TC 96/SC 6ISO 7296-2:1996Cranes -- Graphical symbols -- Part 2: Mobile cranes
90.60 TC 96/SC 6
ISO 7296-3:2006Cranes -- Graphical symbols -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 7752-2:2011Cranes -- Control layout and characteristics -- Part 2: Basic arrangement and requirements for mobile cranes
60.60 TC 96/SC 6
ISO 7752-3:2010Cranes -- Control layout and characteristics -- Part 3: Tower cranes
60.60 TC 96/SC 7
ISO 7752-4:1989 90.92 TC 96/SC 8
Standard and/or project Stage TCCranes -- Controls -- Layout and characteristics -- Part 4: Jib cranesISO 7752-5:1985Lifting appliances -- Controls -- Layout and characteristics -- Part 5: Overhead travelling cranes and portal bridge cranes
90.92 TC 96/SC 9
ISO 8087:1985Mobile cranes -- Drum and sheave sizes
90.92 TC 96/SC 6
ISO 8566-1:2010Cranes -- Cabins and control stations -- Part 1: General
60.60 TC 96/SC 7
ISO 8566-2:1995Cranes -- Cabins -- Part 2: Mobile cranes
90.60 TC 96/SC 6
ISO 8566-3:2010Cranes -- Cabins and control stations -- Part 3: Tower cranes
60.60 TC 96/SC 7
ISO 8566-4:1998Cranes -- Cabins -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 8566-5:1992Cranes -- Cabins -- Part 5: Overhead travelling and portal bridge cranes
90.93 TC 96/SC 9
ISO/DIS 8686-1Cranes -- Design principles for loads and load combinations -- Part 1: General
40.20 TC 96/SC 10
ISO 8686-1:1989Cranes -- Design principles for loads and load combinations -- Part 1: General
90.92 TC 96/SC 10
ISO 8686-2:2004Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes
90.93 TC 96/SC 6
ISO 8686-3:1998Cranes -- Design principles for loads and load combinations -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 8686-4:2005Cranes -- Design principles for loads and load combinations -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 8686-5:1992Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes
90.93 TC 96/SC 9
ISO 9373:1989Cranes and related equipment -- Accuracy requirements for measuring parameters during testing
90.93 TC 96/SC 4
ISO 9374-1:1989Cranes -- Information to be provided -- Part 1: General
90.93 TC 96/SC 8
ISO 9374-3:2002Cranes -- Information to be provided for enquiries, orders, offers and supply -- Part 3: Tower cranes
90.92 TC 96/SC 7
ISO 9374-4:1989Cranes -- Information to be provided -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 9374-5:1991Cranes -- Information to be provided -- Part 5: Overhead travelling
90.93 TC 96/SC 9
Standard and/or project Stage TCcranes and portal bridge cranesISO 9926-1:1990Cranes -- Training of drivers -- Part 1: General
90.60 TC 96/SC 5
ISO/CD 9926-2Cranes -- Training of operators -- Part 2: Mobile cranes
30.20 TC 96/SC 6
ISO 9926-3:2005Cranes -- Training of drivers -- Part 3: Tower cranes
90.60 TC 96/SC 7
ISO/DIS 9927-1Cranes -- Inspections -- Part 1: General
40.93 TC 96/SC 9
ISO 9927-1:2009Cranes -- Inspections -- Part 1: General
60.60 TC 96/SC 5
ISO 9927-3:2005Cranes -- Inspections -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 9928-1:1990Cranes -- Crane driving manual -- Part 1: General
90.60 TC 96/SC 5
ISO 9928-2:2007Cranes -- Crane driving manual -- Part 2: Mobile crane operators
90.60 TC 96/SC 6
ISO 9942-1:1994Cranes -- Information labels -- Part 1: General
90.60 TC 96/SC 5
ISO 9942-3:1999Cranes -- Information labels -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 10245-1:2008Cranes -- Limiting and indicating devices -- Part 1: General
90.93 TC 96/SC 8
ISO 10245-2:1994Cranes -- Limiting and indicating devices -- Part 2: Mobile cranes
90.92 TC 96/SC 6
ISO 10245-3:2008Cranes -- Limiting and indicating devices -- Part 3: Tower cranes
90.60 TC 96/SC 7
ISO 10245-4:2004Cranes -- Limiting and indicating devices -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 10245-4:2004/Cor 1:2006 60.60 TC 96/SC 8ISO 10245-5:1995Cranes -- Limiting and indicating devices -- Part 5: Overhead travelling and portal bridge cranes
90.93 TC 96/SC 9
ISO 10571:2011Tyres for mobile cranes and similar specialized machines
60.60 TC 31/SC 6
ISO 10972-1:1998Cranes -- Requirements for mechanisms -- Part 1: General
90.93 TC 96/SC 9
ISO 10972-2:2009Cranes -- Requirements for mechanisms -- Part 2: Mobile cranes
60.60 TC 96/SC 6
ISO 10972-3:2003Cranes -- Requirements for mechanisms -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 10972-4:2007Cranes -- Requirements for mechanisms -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 10972-5:2006Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes
90.92 TC 96/SC 9
ISO 10973:1995 90.60 TC 96/SC 5
Standard and/or project Stage TCCranes -- Spare parts manualISO 11629:2004Cranes -- Measurement of the mass of a crane and its components
90.93 TC 96/SC 4
ISO 11630:1997Cranes -- Measurement of wheel alignment
90.60 TC 96/SC 4
ISO 11660-1:2008Cranes -- Access, guards and restraints -- Part 1: General
90.60 TC 96/SC 7
ISO 11660-2:1994Cranes -- Access, guards and restraints -- Part 2: Mobile cranes
90.60 TC 96/SC 6
ISO 11660-3:2008Cranes -- Access, guards and restraints -- Part 3: Tower cranes
90.60 TC 96/SC 7
ISO/FDIS 11660-4Cranes -- Access, guards and restraints -- Part 4: Jib cranes
50.20 TC 96/SC 8
ISO 11660-5:2001Cranes -- Access, guards and restraints -- Part 5: Bridge and gantry cranes
90.60 TC 96/SC 9
ISO 11661:1998Mobile cranes -- Presentation of rated capacity charts
90.60 TC 96/SC 6
ISO 11662-1:1995Mobile cranes -- Experimental determination of crane performance -- Part 1: Tipping loads and radii
90.60 TC 96/SC 6
ISO 11994:1997Cranes -- Availability -- Vocabulary
90.93 TC 96/SC 2
ISO 12210-1:1998Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 1: General
90.93 TC 96/SC 8
ISO 12210-4:1998Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 12210-4:1998/Cor 1:2000 60.60 TC 96/SC 8ISO 12478-1:1997Cranes -- Maintenance manual -- Part 1: General
90.60 TC 96/SC 5
ISO 12480-1:1997Cranes -- Safe use -- Part 1: General
90.60 TC 96/SC 5
ISO 12480-3:2005Cranes -- Safe use -- Part 3: Tower cranes
90.93 TC 96/SC 7
ISO 12480-4:2007Cranes -- Safe use -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 12482-1:1995Cranes -- Condition monitoring -- Part 1: General
90.60 TC 96/SC 5
ISO 12485:1998Tower cranes -- Stability requirements
90.93 TC 96/SC 7
ISO/DIS 12488-1Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 1: General
40.99 TC 96/SC 8
ISO 12488-1:2005Cranes -- Tolerances for wheels and travel and traversing tracks -- Part
90.92 TC 96/SC 8
Standard and/or project Stage TC1: GeneralISO 12488-1:2005/Cor 1:2008 60.60 TC 96/SC 8ISO 12488-4:2004Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib cranes
90.93 TC 96/SC 8
ISO 13200:1995Cranes -- Safety signs and hazard pictorials -- General principles
90.60 TC 96/SC 6
ISO 13202:2003Cranes -- Measurement of velocity and time parameters
90.93 TC 96/SC 4
ISO 14518:2005Cranes -- Requirements for test loads
90.60 TC 96/SC 4
ISO/DIS 15442Cranes -- Safety requirements for loader cranes
40.20 TC 96/SC 6
ISO 15442:2005Cranes -- Safety requirements for loader cranes
90.92 TC 96/SC 6
ISO 15513:2000Cranes -- Competency requirements for crane drivers (operators), slingers, signallers and assessors
90.60 TC 96/SC 5
ISO/TS 15696:2000Cranes -- List of equivalent terms
90.92 TC 96/SC 2
ISO/NP TS 15696Cranes -- List of equivalent terms
10.99 TC 96/SC 2
ISO/TR 16880:2004Cranes -- Bridge and gantry cranes -- International Standards for design and manufacturing requirements and recommendations
60.60 TC 96/SC 9
ISO 16881-1:2005Cranes -- Design calculation for rail wheels and associated trolley track supporting structure -- Part 1: General
90.93 TC 96/SC 9
ISO/CD 17440Cranes -- General Design -- Limit states and proof of competence of forged steel hooks
30.60 TC 96/SC 8
ISO/TR 19961:2010Cranes -- Safety code on mobile cranes
60.60 TC 96/SC 6
ISO 20332:2008Cranes -- Proof of competence of steel structures
90.20 TC 96/SC 10
ISO 22986:2007Cranes -- Stiffness -- Bridge and gantry cranes
90.93 TC 96/SC 9
ISO 23813:2007Cranes -- Training of appointed persons
90.60 TC 96/SC 5
ISO 23814:2009Cranes -- Competency requirements for crane inspectors
60.60 TC 96/SC 5
ISO 23815-1:2007Cranes -- Maintenance -- Part 1: General
90.60 TC 96/SC 5
ISO 23853:2004Cranes -- Training of slingers and signallers
90.93 TC 96/SC 5
ISO/TR 25599:2005Cranes -- Jib cranes -- International Standards for design,
60.60 TC 96/SC 8
Standard and/or project Stage TCmanufacturing, use and maintenance requirements and recommendationsISO/TR 27245:2007Cranes -- Tower cranes -- International Standards for design, manufacture, use and maintenance requirements and recommendations
60.60 TC 96/SC 7
© 2011 ISO Privacy Policy Name and logo Sitemap Contact ISO Guided tour of ISO-Online Print Increase text size News feeds
Bottom of FormStandard and/or project Stage TC
ISO 1834:1999Short link chain for lifting purposes -- General conditions of acceptance
90.93 TC 111/SC 1
ISO 1835:1980Short link chain for lifting purposes -- Grade M (4), non-calibrated, for chain slings etc.
90.93 TC 111/SC 1
ISO 1837:2003Lifting hooks -- Nomenclature
90.93 TC 111/SC 3
ISO 2262:1984General purpose thimbles for use with steel wire ropes -- Specification
90.93 TC 105
ISO 2308:1972Hooks for lifting freight containers of up to 30 tonnes capacity -- Basic requirements
90.93 TC 111/SC 3
ISO 2415:2004Forged shackles for general lifting purposes -- Dee shackles and bow shackles
90.93 TC 111/SC 3
ISO 3056:1986Non-calibrated round steel link lifting chain and chain slings -- Use and maintenance
90.93 TC 111/SC 1
ISO 3075:1980Short link chain for lifting purposes -- Grade S (6) non calibrated, for chain slings etc.
90.93 TC 111/SC 1
ISO 3076:1984Short link chain for lifting purposes -- Grade T (8), non-calibrated, for chain slings etc.
90.92 TC 111/SC 1
ISO/DIS 3076Round steel short link chains for general lifting purposes -- Medium tolerance sling chains for chain slings -- Grade 8
40.99 TC 111/SC 1
ISO 3077:2001Short-link chain for lifting purposes -- Grade T, (types T, DAT and
90.20 TC 111/SC 1
Standard and/or project Stage TCDT), fine-tolerance hoist chainISO 3266:2010Forged steel eyebolts grade 4 for general lifting purposes
60.60 TC 111/SC 3
ISO 4308-1:2003Cranes and lifting appliances -- Selection of wire ropes -- Part 1: General
90.92 TC 96/SC 3
ISO 4308-2:1988Cranes and lifting appliances -- Selection of wire ropes -- Part 2: Mobile cranes -- Coefficient of utilization
90.92 TC 96/SC 6
ISO 4309:2010Cranes -- Wire ropes -- Care and maintenance, inspection and discard
60.60 TC 96/SC 3
ISO 4778:1981Chain slings of welded construction -- Grades M (4), S (6) and T (8)
90.93 TC 111/SC 1
ISO 4779:1986Forged steel lifting hooks with point and eye for use with steel chains of grade M(4)
90.93 TC 111/SC 3
ISO 7592:1983Calibrated round steel link lifting chains -- Guidelines to proper use and maintenance
90.93 TC 111/SC 1
ISO 7593:1986Chain slings assembled by methods other than welding -- Grade T(8)
90.93 TC 111/SC 1
ISO 7597:1987Forged steel lifting hooks with point and eye for use with steel chains of grade T(8)
90.92 TC 111/SC 3
ISO/DIS 7597Forged steel lifting hooks with point and eye for use with grade 8 chain
40.99 TC 111/SC 3
ISO 8539:2009Forged steel lifting components for use with Grade 8 chain
60.60 TC 111/SC 3
ISO/DIS 16625Cranes and hoists -- Selection of wire ropes, drums and sheaves
40.20 TC 96/SC 3
ISO 16798:2004Links of Grade 8 for use with slings
90.93 TC 111/SC 3
ISO 16872:2008Short link chains for lifting purposes -- Grade VH, fine tolerance for manually operated chain hoists
90.92 TC 111/SC 1
ISO/NP 16872Short link chains for lifting purposes -- Grade VH, fine tolerance for manually operated chain hoists
10.99 TC 111/SC 1
ISO 16877:2008Short link chains for lifting purposes -- Grade TH, fine tolerance for manually operated chain hoists
90.92 TC 111/SC 1
ISO/NP 16877Short link chains for lifting purposes -- Grade TH, fine tolerance for manually operated chain hoists
10.99 TC 111/SC 1
ISO/TR 23602:2005Toughness of chain steels
60.60 TC 111/SC 1
ISO/NP 11988Code of practise for the installation, maintenance, thorough examination and safe use of mast-climbing work platforms
10.99TC 214
ISO 16368:2010Mobile elevating work platforms -- Design, calculations, safety requirements and test methods
60.60TC 214
ISO 16369:2007Elevating work platforms -- Mast-climbing work platforms
90.93TC 214
ISO 16653-1:2008Mobile elevating work platforms -- Design, calculations, safety requirements and test methods relative to special features -- Part 1: MEWPs with retractable guardrail systems
90.93TC 214
ISO 16653-2:2009Mobile elevating work platforms -- Design, calculations, safety requirements and test methods relative to special features -- Part 2: MEWPs with non-conductive (insulating) components
60.60TC 214
ISO 16653-3:2011Mobile elevating work platforms -- Design, calculations, safety requirements and test methods relative to special features -- Part 3: MEWPs for orchard operations
60.60TC 214
ISO/CD 18878Mobile elevating work platforms -- Operator (driver) training
30.99TC 214
ISO 18878:2004Mobile elevating work platforms -- Operator (driver) training
90.92TC 214
ISO/NP 18893Mobile elevating work platforms -- Safety principles, inspection, maintenance and operation
10.99TC 214
ISO 18893:2004Mobile elevating work platforms -- Safety principles, inspection, maintenance and operation
90.92TC 214
ISO 20381:2009Mobile elevating work platforms -- Symbols for operator controls and other displays
60.60TC 214
ISO 2860:1992Earth-moving machinery -- Minimum access dimensions
90.93TC 127/SC 2
ISO 2867:2011Earth-moving machinery -- Access systems
60.60TC 127/SC 2
ISO 2867:2006/Cor 1:2008 60.60TC 127/SC 2ISO/CD 3164Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume
30.99TC 127/SC 2
ISO 3164:1995Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume
90.92TC 127/SC 2
ISO 3411:2007Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope
90.93TC 127/SC 2
ISO 3449:2005Earth-moving machinery -- Falling-object protective structures -- Laboratory tests
90.93TC 127/SC 2
and performance requirementsISO 3450:2011Earth-moving machinery -- Wheeled or high-speed rubber-tracked machines -- Performance requirements and test procedures for brake systems
60.60TC 127/SC 2
ISO 3457:2003Earth-moving machinery -- Guards -- Definitions and requirements
90.93TC 127/SC 2
ISO 3471:2008Earth-moving machinery -- Roll-over protective structures -- Laboratory tests and performance requirements
90.92TC 127/SC 2
ISO 4250-3:2011Earth-mover tyres and rims -- Part 3: Rims
60.60TC 31/SC 6
ISO 4510-1:1987Earth-moving machinery -- Service tools -- Part 1: Common maintenance and adjustment tools
90.93TC 127/SC 3
ISO 4510-2:1996Earth-moving machinery -- Service tools -- Part 2: Mechanical pullers and pushers
90.20TC 127/SC 3
ISO 5005:1977Earth-moving machinery -- Method for locating the centre of gravity
90.93TC 127/SC 1
ISO 5006:2006Earth-moving machinery -- Operator's field of view -- Test method and performance criteria
90.20TC 127/SC 2
ISO 5006:2006/Cor 1:2008 60.60TC 127/SC 2ISO 5010:2007Earth-moving machinery -- Rubber-tyred machines -- Steering requirements
90.93TC 127/SC 2
ISO 5353:1995Earth-moving machinery, and tractors and machinery for agriculture and forestry -- Seat index point
90.93TC 127/SC 2
ISO 6011:2003Earth-moving machinery -- Visual display of machine operation
90.93TC 127/SC 3
ISO 6012:1997Earth-moving machinery -- Service instrumentation
90.93TC 127/SC 3
ISO 6014:1986Earth-moving machinery -- Determination of ground speed
90.20TC 127/SC 1
ISO 6015:2006Earth-moving machinery -- Hydraulic excavators and backhoe loaders -- Methods of determining tool forces
90.60TC 127/SC 1
ISO 6016:2008Earth-moving machinery -- Methods of measuring the masses of whole machines, their equipment and components
90.20TC 127/SC 1
ISO/DIS 6165Earth-moving machinery -- Basic types -- Identification and terms and definitions
40.60TC 127/SC 4
ISO 6165:2006Earth-moving machinery -- Basic types -- Identification and terms and definitions
90.92TC 127/SC 4
ISO 6302:1993Earth-moving machinery -- Drain, fill and level plugs
90.93TC 127/SC 3
ISO 6392-1:1996Earth-moving machinery -- Lubrication fittings -- Part 1: Nipple type
90.20TC 127/SC 3
ISO 6392-2:1996 90.20TC 127/SC 3
Earth-moving machinery -- Lubrication fittings -- Part 2: Grease-gun nozzlesISO 6393:2008Earth-moving machinery -- Determination of sound power level -- Stationary test conditions
90.60TC 127/SC 2
ISO 6394:2008Earth-moving machinery -- Determination of emission sound pressure level at operator's position -- Stationary test conditions
90.60TC 127/SC 2
ISO 6394:2008/Cor 1:2009 60.60TC 127/SC 2ISO 6395:2008Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
90.60TC 127/SC 2
ISO 6396:2008Earth-moving machinery -- Determination of emission sound pressure level at operator's position -- Dynamic test conditions
90.60TC 127/SC 2
ISO 6396:2008/Cor 1:2009 60.60TC 127/SC 2ISO 6405-1:2004Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols
90.92TC 127/SC 3
ISO 6405-1:2004/Amd 1:2010Additional symbols
60.60TC 127/SC 3
ISO 6405-2:1993Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Specific symbols for machines, equipment and accessories
90.92TC 127/SC 3
ISO 6405-2:1993/Amd 1:1997 60.60TC 127/SC 3ISO 6405-2:1993/Amd 2:2004Additional symbols
60.60TC 127/SC 3
ISO 6483:1980Earth-moving machinery -- Dumper bodies -- Volumetric rating
90.93TC 127/SC 1
ISO 6483:1980/Cor 1:1994 60.60TC 127/SC 1ISO 6484:1986Earth-moving machinery -- Elevating scrapers -- Volumetric ratings
90.60TC 127/SC 1
ISO 6485:1980Earth-moving machinery -- Tractor-scraper -- Volumetric rating
90.93TC 127/SC 1
ISO 6682:1986Earth-moving machinery -- Zones of comfort and reach for controls
90.20TC 127/SC 2
ISO 6682:1986/Amd 1:1989 60.60TC 127/SC 2ISO 6683:2005Earth-moving machinery -- Seat belts and seat belt anchorages -- Performance requirements and tests
90.93TC 127/SC 2
ISO 6746-1:2003Earth-moving machinery -- Definitions of dimensions and codes -- Part 1: Base machine
90.60TC 127/SC 4
ISO 6746-2:2003Earth-moving machinery -- Definitions of dimensions and codes -- Part 2: Equipment and attachments
90.60TC 127/SC 4
ISO 6746-2:2003/Cor 1:2004 60.60TC 127/SC 4ISO 6747:1998Earth-moving machinery -- Tractor-dozers -- Terminology and commercial
90.92TC 127/SC 4
specificationsISO/CD 6747Earth-moving machinery -- Tractor-dozers -- Terminology and commercial specifications
30.99TC 127/SC 4
ISO 6747:1998/Amd 1:2003 60.60TC 127/SC 4ISO 6749:1984Earth-moving machinery -- Preservation and storage
90.93TC 127/SC 3
ISO 6750:2005Earth-moving machinery -- Operator's manual -- Content and format
90.60TC 127/SC 3
ISO 7096:2000Earth-moving machinery -- Laboratory evaluation of operator seat vibration
90.92TC 127/SC 2
ISO/NP 7096Earth-moving machinery -- Laboratory evaluation of operator seat vibration
10.99TC 127/SC 2
ISO 7129:1997Earth-moving machinery -- Cutting edges used on tractor-dozers, graders and scrapers -- Principal shapes and basic dimensions
90.93TC 127/SC 3
ISO/CD 7130Earth-moving machinery -- Guide to procedure for operator training
30.60TC 127/SC 3
ISO 7130:1981Earth-moving machinery -- Guide to procedure for operator training
90.92TC 127/SC 3
ISO 7131:2009Earth-moving machinery -- Loaders -- Terminology and commercial specifications
60.60TC 127/SC 4
ISO 7132:2003Earth-moving machinery -- Dumpers -- Terminology and commercial specifications
90.60TC 127/SC 4
ISO 7133:1994Earth-moving machinery -- Tractor-scrapers -- Terminology and commercial specifications
90.92TC 127/SC 4
ISO/DIS 7133Earth-moving machinery -- Tractor-scrapers -- Terminology and commercial specifications
40.20TC 127/SC 4
ISO 7134:1993Earth-moving machinery -- Graders -- Terminology and commercial specifications
90.92TC 127/SC 4
ISO/DIS 7134Earth-moving machinery -- Graders -- Terminology and commercial specifications
40.20TC 127/SC 4
ISO 7134:1993/Cor 1:1996 60.60TC 127/SC 4ISO 7135:2009Earth-moving machinery -- Hydraulic excavators -- Terminology and commercial specifications
60.60TC 127/SC 4
ISO 7136:2006Earth-moving machinery -- Pipelayers -- Terminology and commercial specifications
90.60TC 127/SC 4
ISO 7451:2007Earth-moving machinery -- Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders
90.93TC 127/SC 1
ISO 7457:1997Earth-moving machinery -- Determination of turning dimensions of wheeled machines
90.60TC 127/SC 1
ISO 7464:1983Earth-moving machinery -- Method of test for the measurement of drawbar pull
90.93TC 127/SC 1
ISO 7546:1983Earth-moving machinery -- Loader and front loading excavator buckets -- Volumetric ratings
90.93TC 127/SC 1
ISO 7852:1983Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
90.93TC 127/SC 3
ISO 8152:1984Earth-moving machinery -- Operation and maintenance -- Training of mechanics
90.93TC 127/SC 3
ISO 8643:1997Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests
90.92TC 127/SC 1
ISO 8811:2000Earth-moving machinery -- Rollers and compactors -- Terminology and commercial specifications
90.92TC 127/SC 4
ISO 8811:2000/Cor 1:2002 60.60TC 127/SC 4ISO 8812:1999Earth-moving machinery -- Backhoe loaders -- Definitions and commercial specifications
90.60TC 127/SC 4
ISO 8813:1992Earth-moving machinery -- Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom
90.60TC 127/SC 1
ISO 8925:1989Earth-moving machinery -- Diagnostic ports
90.93TC 127/SC 3
ISO 8925:1989/Amd 1:1997 60.60TC 127/SC 3ISO 8927:1991Earth-moving machinery -- Machine availability -- Vocabulary
90.20TC 127/SC 3
ISO 9244:2008Earth-moving machinery -- Machine safety labels -- General principles
90.60TC 127/SC 2
ISO 9245:1991Earth-moving machinery -- Machine productivity -- Vocabulary, symbols and units
90.20TC 127/SC 4
ISO 9246:1988Earth-moving machinery -- Crawler and wheel tractor dozer blades -- Volumetric ratings
90.93TC 127/SC 1
ISO 9247:1990Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking
90.93TC 127/SC 3
ISO 9247:1990/Amd 1:1998 60.60TC 127/SC 3ISO 9248:1992Earth-moving machinery -- Units for dimensions, performance and capacities, and their measurement accuracies
90.60TC 127/SC 1
ISO 9249:2007Earth-moving machinery -- Engine test code -- Net power
90.60TC 127/SC 1
ISO/TS 9250-1:2004Earth-moving machinery -- Multilingual listing of equivalent terms -- Part 1: General
90.60TC 127/SC 4
ISO/TS 9250-2:2004 90.60TC 127/SC 4
Earth-moving machinery -- Multilingual listing of equivalent terms -- Part 2: Performance and dimensionsISO 9533:2010Earth-moving machinery -- Machine-mounted audible travel alarms and forward horns -- Test methods and performance criteria
60.60TC 127/SC 2
ISO/TR 9953:1996Earth-moving machinery -- Warning devices for slow-moving machines -- Ultrasonic and other systems
90.93TC 127/SC 2
ISO 10261:2002Earth-moving machinery -- Product identification numbering system
90.93TC 127/SC 3
ISO 10262:1998Earth-moving machinery -- Hydraulic excavators -- Laboratory tests and performance requirements for operator protective guards
90.93TC 127/SC 2
ISO 10262:1998/Cor 1:2009 60.60TC 127/SC 2ISO 10263-1:2009Earth-moving machinery -- Operator enclosure environment -- Part 1: Terms and definitions
60.60TC 127/SC 2
ISO 10263-2:2009Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method
60.60TC 127/SC 2
ISO 10263-3:2009Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
60.60TC 127/SC 2
ISO 10263-4:2009Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
60.60TC 127/SC 2
ISO 10263-5:2009Earth-moving machinery -- Operator enclosure environment -- Part 5: Windscreen defrosting system test method
60.60TC 127/SC 2
ISO 10263-6:2009Earth-moving machinery -- Operator enclosure environment -- Part 6: Determination of effect of solar heating
60.60TC 127/SC 2
ISO 10264:1990Earth-moving machinery -- Key-locked starting systems
90.60TC 127/SC 2
ISO 10265:2008Earth-moving machinery -- Crawler machines -- Performance requirements and test procedures for braking systems
90.60TC 127/SC 1
ISO 10266:1992Earth-moving machinery -- Determination of slope limits for machine fluid systems operation -- Static test method
90.60TC 127/SC 1
ISO 10268:1993Earth-moving machinery -- Retarders for dumpers and tractor-scrapers -- Performance tests
90.93TC 127/SC 1
ISO 10326-1:1992Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements
90.93TC 108/SC 4
ISO 10326-1:1992/Amd 1:2007 60.60TC 108/SC 4ISO 10326-1:1992/Amd 2:2011 60.60TC 108/SC 4
ISO 10532:1995Earth-moving machinery -- Machine-mounted retrieval device -- Performance requirements
90.93TC 127/SC 1
ISO 10532:1995/Amd 1:2004/Cor 1:2006 60.60TC 127/SC 1ISO 10532:1995/Cor 1:2006 60.60TC 127/SC 1ISO 10532:1995/Amd 1:2004 60.60TC 127/SC 1ISO 10533:1993Earth-moving machinery -- Lift-arm support devices
90.93TC 127/SC 2
ISO 10533:1993/Amd 1:2005 60.60TC 127/SC 2ISO 10567:2007Earth-moving machinery -- Hydraulic excavators -- Lift capacity
90.60TC 127/SC 1
ISO 10570:2004Earth-moving machinery -- Articulated frame lock -- Performance requirements
90.93TC 127/SC 1
ISO 10968:2004Earth-moving machinery -- Operator's controls
90.93TC 127/SC 2
ISO/DIS 10987Earth-moving machinery -- Sustainability -- Terminology, sustainability factors and reporting
40.99TC 127
ISO 11112:1995Earth-moving machinery -- Operator's seat -- Dimensions and requirements
90.93TC 127/SC 2
ISO 11112:1995/Amd 1:2001 60.60TC 127/SC 2ISO/DTS 11708Non metallic material qualification for use in earth moving machinery -- Operator protective structures
30.20TC 127/SC 1
ISO 11862:1993Earth-moving machinery -- Auxiliary starting aid electrical connector
90.93TC 127/SC 3
ISO 12117:1997Earth-moving machinery -- Tip-over protection structure (TOPS) for compact excavators -- Laboratory tests and performance requirements
90.92TC 127/SC 2
ISO 12117:1997/Cor 1:2000 60.60TC 127/SC 2ISO 12117-2:2008Earth-moving machinery -- Laboratory tests and performance requirements for protective structures of excavators -- Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t
90.20TC 127/SC 2
ISO 12117-2:2008/Cor 1:2010 60.60TC 127/SC 2ISO 12508:1994Earth-moving machinery -- Operator station and maintenance areas -- Bluntness of edges
90.93TC 127/SC 2
ISO 12509:2004Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices
90.93TC 127/SC 3
ISO 12510:2004Earth-moving machinery -- Operation and maintenance -- Maintainability guidelines
90.93TC 127/SC 3
ISO 12511:1997Earth-moving machinery -- Hour meters
90.93TC 127/SC 3
ISO/DIS 13031Earth-moving machinery -- Quick couplers -- Safety
40.20TC 127/SC 2
ISO 13333:1994Earth-moving machinery -- Dumper body support and operator's cab tilt support devices
90.93TC 127/SC 2
ISO 13459:1997Earth-moving machinery -- Dumpers -- Trainer seat/enclosure
90.92TC 127/SC 2
ISO/FDIS 13459Earth-moving machinery -- Trainer seat -- Deflection limiting volume, space envelope and performance requirements
50.00TC 127/SC 2
ISO 13539:1998Earth-moving machinery -- Trenchers -- Definitions and commercial specifications
90.60TC 127/SC 4
ISO 13766:2006Earth-moving machinery -- Electromagnetic compatibility
90.92TC 127/SC 2
ISO/NP 13766-1Earth-moving machinery -- Electromagnetic compatibility -- Part 1: Functional EMC requirements under typical EMC environmental conditions
10.99TC 127/SC 2
ISO 14397-1:2007Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
90.60TC 127/SC 1
ISO 14397-2:2007Earth-moving machinery -- Loaders and backhoe loaders -- Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height
90.60TC 127/SC 1
ISO 14401-1:2009Earth-moving machinery -- Field of vision of surveillance and rear-view mirrors -- Part 1: Test methods
60.60TC 127/SC 1
ISO 14401-2:2009Earth-moving machinery -- Field of vision of surveillance and rear-view mirrors -- Part 2: Performance criteria
60.60TC 127/SC 1
ISO 15143-1:2010Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 1: System architecture
60.60TC 127/SC 3
ISO 15143-2:2010Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 2: Data dictionary
60.60TC 127/SC 3
ISO 15219:2004Earth-moving machinery -- Cable excavators -- Terminology and commercial specifications
90.60TC 127/SC 4
ISO 15817:2005Earth-moving machinery -- Safety requirements for remote operator control
90.92TC 127/SC 2
ISO/FDIS 15817Earth-moving machinery -- Safety requirements for remote operator control systems
50.20TC 127/SC 2
ISO/FDIS 15818.2Earth-moving machinery -- Lifting and tying-down attachment points -- Performance requirements
50.92TC 127/SC 3
ISO 15998:2008Earth-moving machinery -- Machine-control systems (MCS) using electronic components -- Performance criteria and tests for functional safety
90.60TC 127/SC 3
ISO/NP TS 15998-2 30.20TC 127/SC 3
Earth-moving machinery -- Machine control systems (MCS) using electronic components -- Part 2: Guidelines for the use and application of ISO 15998ISO 16001:2008Earth-moving machinery -- Hazard detection systems and visual aids -- Performance requirements and tests
90.60TC 127/SC 2
ISO 16714:2008Earth-moving machinery -- Recyclability and recoverability -- Terminology and calculation method
90.20TC 127/SC 3
ISO 16754:2008Earth-moving machinery -- Determination of average ground contact pressure for crawler machines
90.60TC 127/SC 1
ISO 17063:2003Earth-moving machinery -- Braking systems of pedestrian-controlled machines -- Performance requirements and test procedures
90.93TC 127/SC 2
ISO/NP 17253Earthmoving machines and RTT -- Design requirements for circulation on the road
10.99TC 127/SC 1
ISO 20474-1:2008Earth-moving machinery -- Safety -- Part 1: General requirements
90.92TC 127/SC 2
ISO 20474-2:2008Earth-moving machinery -- Safety -- Part 2: Requirements for tractor-dozers
90.92TC 127/SC 2
ISO 20474-3:2008Earth-moving machinery -- Safety -- Part 3: Requirements for loaders
90.92TC 127/SC 2
ISO 20474-4:2008Earth-moving machinery -- Safety -- Part 4: Requirements for backhoe-loaders
90.92TC 127/SC 2
ISO 20474-5:2008Earth-moving machinery -- Safety -- Part 5: Requirements for hydraulic excavators
90.92TC 127/SC 2
ISO 20474-6:2008Earth-moving machinery -- Safety -- Part 6: Requirements for dumpers
90.92TC 127/SC 2
ISO 20474-7:2008Earth-moving machinery -- Safety -- Part 7: Requirements for scrapers
90.92TC 127/SC 2
ISO 20474-8:2008Earth-moving machinery -- Safety -- Part 8: Requirements for graders
90.92TC 127/SC 2
ISO 20474-9:2008Earth-moving machinery -- Safety -- Part 9: Requirements for pipelayers
90.92TC 127/SC 2
ISO 20474-10:2008Earth-moving machinery -- Safety -- Part 10: Requirements for trenchers
90.92TC 127/SC 2
ISO 20474-11:2008Earth-moving machinery -- Safety -- Part 11: Requirements for earth and landfill compactors
90.92TC 127/SC 2
ISO 20474-12:2008Earth-moving machinery -- Safety -- Part 12: Requirements for cable excavators
90.92TC 127/SC 2
ISO 20474-13:2008Earth-moving machinery -- Safety -- Part 13: Requirements for rollers
90.92TC 127/SC 2
ISO/TS 20474-14:2008Earth-moving machinery -- Safety -- Part 14: Information on national and regional provisions
90.92TC 127/SC 2
ISO 21467:2004Earth-moving machinery -- Horizontal directional drills -- Terminology and
90.60TC 127/SC 4
specificationsISO 21507:2010Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
60.60TC 127/SC 1
ISO 22448:2010Earth-moving machinery -- Anti-theft systems -- Classification and performance
60.60TC 127/SC 3
ISO 23727:2009Earth-moving machinery -- Wheeled loader coupler for attachments
60.60TC 127/SC 3
ISO 24410:2005Earth-moving machinery -- Coupling of attachments to skid steer loaders
90.93TC 127/SC 2
ISO/NP TR 25398Earth-moving machinery -- Guidelines for assessment of exposure to whole-body vibration of ride-on machines -- Use of harmonized data measured by international institutes, organizations and manufacturers
10.99TC 127/SC 2
ISO/TR 25398:2006Earth-moving machinery -- Guidelines for assessment of exposure to whole-body vibration of ride-on machines -- Use of harmonized data measured by international institutes, organizations and manufacturers
90.92TC 127/SC 2
Standard and/or project Stage TC
ISO 509:1996Pallet trucks -- Principal dimensions
90.60 TC 110/SC 2
ISO 938:1975Hand-operated stillage trucks -- Principal dimensions
90.93 TC 110/SC 2
ISO 1044:1993Industrial trucks -- Lead-acid traction batteries for electric trucks -- Preferred voltages
90.93 TC 110/SC 2
ISO 1756:1975Industrial trucks -- Dimensions of stillages -- Connection gauge
90.93 TC 110/SC 2
ISO 2328:2011Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions
60.60 TC 110/SC 2
ISO 2330:2002Fork-lift trucks -- Fork arms -- Technical characteristics and testing
90.93 TC 110/SC 2
ISO 2331:1974Fork lift trucks -- Hook-on type fork arms -- Vocabulary
90.93 TC 110/SC 2
ISO 3287:1999Powered industrial trucks -- Symbols for operator controls and other displays
90.93 TC 110/SC 2
ISO 3691:1980Powered industrial trucks -- Safety code
90.93 TC 110
ISO 3691:1980/Amd 1:1983 60.60 TC 110ISO 3691-1:2011Industrial trucks -- Safety requirements and verification -- Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
60.60 TC 110/SC 2
ISO/FDIS 3691-2Industrial trucks -- Safety requirements and verification -- Part 2: Self-propelled variable-reach trucks
50.00 TC 110/SC 2
Standard and/or project Stage TCISO/DIS 3691-3.3Industrial trucks -- Safety requirements and verification -- Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
40.93 TC 110/SC 2
ISO/FDIS 3691-4Industrial trucks -- Safety requirements and verification -- Part 4: Driverless industrial trucks and their systems
50.00 TC 110/SC 2
ISO 3691-5:2009Industrial trucks -- Safety requirements and verification -- Part 5: Pedestrian-propelled trucks
60.60 TC 110/SC 2
ISO/FDIS 3691-6Industrial trucks -- Safety requirements and verification -- Part 6: Burden and personnel carriers
50.00 TC 110/SC 2
ISO/TS 3691-7:2011Industrial trucks -- Safety requirements and verification -- Part 7: Regional requirements for countries within the European Community
60.60 TC 110/SC 2
ISO/DTS 3691-8Industrial trucks -- Safety requirements and verification -- Part 8: Regional requirements for countries outside the European Community
30.99 TC 110/SC 2
ISO 3739-3:2008Industrial tyres and rims -- Part 3: Rims
90.60 TC 31/SC 7
ISO 5053:1987Powered industrial trucks -- Terminology
90.92 TC 110/SC 1
ISO 5057:1993Industrial trucks -- Inspection and repair of fork arms in service on fork-lift trucks
90.93 TC 110/SC 2
ISO 6055:2004Industrial trucks -- Overhead guards -- Specification and testing
90.60 TC 110/SC 2
ISO 6292:2008Powered industrial trucks and tractors -- Brake performance and component strength
90.20 TC 110/SC 2
ISO 10525:1997Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above -- Additional stability tests
90.60 TC 110/SC 2
ISO/DIS 10896-1Rough-terrain trucks -- Safety requirements and verification -- Part 1: Variable-reach trucks
40.99 TC 110/SC 4
ISO/DIS 11525-1Rough-terrain trucks - User requirements -- Part 1: General requirements
40.99 TC 110/SC 4
ISO 13284:2003Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical characteristics and strength requirements
90.93 TC 110/SC 2
ISO 13562-1:2000Industrial variable-reach trucks -- Part 1: Stability tests
90.93 TC 110/SC 2
ISO 13562-2:2001Industrial variable-reach trucks -- Part 2: Additional stability tests for
90.60 TC 110/SC 2
Standard and/or project Stage TCtrucks handling freight containers of 6 m length and aboveISO 13563-1:2001Single side loading fork-lift trucks -- Part 1: Stability tests
90.60 TC 110/SC 2
ISO 13563-2:2001Single side loading fork-lift trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
90.60 TC 110/SC 2
ISO/FDIS 13564-1Powered industrial trucks -- Test methods for verification of visibility -- Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
50.92 TC 110/SC 2
ISO 15794:2001Bi-directional and multi-directional fork-lift trucks -- Stability tests
90.60 TC 110/SC 2
ISO 15870:2000Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
90.93 TC 110/SC 2
ISO 15871:2000Industrial trucks -- Specifications for indicator lights for container handling and grappler arm operations
90.93 TC 110/SC 2
ISO 20898:2008Industrial trucks -- Electrical requirements
90.20 TC 110/SC 2
ISO 21281:2005Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks -- Rules for the construction and layout of pedals
90.93 TC 110/SC 2
ISO 22877:2004Castors and wheels -- Vocabulary, symbols and multilingual terminology
90.93 TC 110/SC 3
ISO 22878:2004Castors and wheels -- Test methods and apparatus
90.93 TC 110/SC 3
ISO 22881:2004Castors and wheels -- Requirements for use on manually propelled equipment for institutional applications
90.92 TC 110/SC 3
ISO 22883:2004Castors and wheels -- Requirements for applications up to 1,1 m/s (4 km/h)
90.93 TC 110/SC 3
ISO 22884:2004Castors and wheels -- Requirements for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
90.93 TC 110/SC 3
ISO 22915-1:2008Industrial trucks -- Verification of stability -- Part 1: General
90.20 TC 110/SC 2
ISO 22915-2:2008Industrial trucks -- Verification of stability -- Part 2: Counterbalanced trucks with mast
90.20 TC 110/SC 2
ISO 22915-3:2008Industrial trucks -- Verification of stability -- Part 3: Reach and straddle trucks
90.20 TC 110/SC 2
ISO 22915-4:2009 60.60 TC 110/SC 2
Standard and/or project Stage TCIndustrial trucks -- Verification of stability -- Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift heightISO 22915-7:2009Industrial trucks -- Verification of stability -- Part 7: Bidirectional and multidirectional trucks
60.60 TC 110/SC 2
ISO 22915-8:2008Industrial trucks -- Verification of stability -- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
90.60 TC 110/SC 2
ISO/NP 22915-9Industrial Trucks -- Verification of stability -- Part 9: Counterbalanced trucks with mast handling freight containers of 6m (20 ft) length and longer
10.99 TC 110/SC 2
ISO 22915-10:2008Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
90.60 TC 110/SC 2
ISO 22915-11:2011Industrial trucks -- Verification of stability -- Part 11: Industrial variable-reach trucks
60.60 TC 110/SC 2
ISO/NP 22915-12Industrial trucks -- Verification of stability -- Part 12: Industrial variable-reach trucks handling freight containers of 6m (20ft) length and longer
10.99 TC 110/SC 2
ISO/FDIS 22915-13Industrial trucks -- Verification of stability -- Part 13: Rough-terrain trucks with mast
50.20 TC 110/SC 2
ISO 22915-14:2010Industrial trucks -- Verification of stability -- Part 14: Rough-terrain variable-reach trucks
60.60 TC 110/SC 4
ISO/CD 22915-15Indutrial trucks -- Verification of stability -- Part 15: Counterbalanced trucks with articulated steering
30.99 TC 110/SC 2
ISO/CD 22915-16Industrial trucks -- Verification of stability -- Part 16: Pedestrian-propelled trucks
30.99 TC 110/SC 2
ISO 22915-20:2008Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
90.60 TC 110/SC 2
ISO 22915-21:2009Industrial trucks -- Verification of stability -- Part 21: Order-picking trucks with operator position elevating above 1 200 mm
60.60 TC 110/SC 2
ISO/CD 22915-22Industrial trucks -- Verification of stability -- Part 22: Lateral- and front-stacking trucks with elevating operator position
30.20 TC 110/SC 2
Standard and/or project Stage TCISO 24134:2006Industrial trucks -- Additional requirements for automated functions on trucks
90.93 TC 110/SC 2
ISO 24135-1:2006Industrial trucks -- Specifications and test methods for operator restraint systems -- Part 1: Lap-type seat belts
90.93 TC 110/SC 2
ISO/TR 29944:2010Powered industrial trucks and tractors -- Brake performance -- Determination of measurement procedures
60.60 TC 110/SC 2
