Upload
tariq-mehmood
View
102
Download
2
Embed Size (px)
Citation preview
v LOW CAPITAL COST v FULLY WELDED TUBES v 3 PASS DESIGN v RAPID STARTUP SAVE$ TIME v LOW HEAT EMISSIONS v SMALL FLOOR SPACE NEEDED
To Compare N.C.E boilers specifications exceed the minimum requirements of relevant codes, and compare favorably to other equipment that is available). SPACE REQUIREMENTS The N.C.E range of boilers being vertical down fired design takes a minimum of valuable floor space. OPERATING COSTS Are minimized with the N.C.E boilers, the 3 pass natural circulation water wall design will provide a guaranteed minimum of 80% efficiency across the operating range of boilers. RADIATED HEAT is not a problem with N.C.E boilers, high quality thermal insulation is fitted to the boilers, ensuring a more comfortable workplace, and increased energy efficiency. QUALITY FITOUT of the N.C.E boilers Has enabled a low cost low maintenance v QUALITY FITOUT COMPONENTS steam boiler that will provide many years v EASY TO OPERATE of reliable service. v EASY TO SERVICE v PARTS READILY AVAILABLE
N.C.E Series Water Tube Boilers N.C.E is the registered product range of steam generation equipment manufacture by the New Challenger Engineering Services.
The N.C.E boilers have a standard design pressure of 140psi, but are supplied fitted out to client’s specification. . All N.C.E boilers are engineered to provide a long service life with minimal maintenance requirements. N.C.E boilers carry a 12 months warranty on the shell & tubes, providing the boiler is operated and maintained within relevant Standards, including water treatment. .
Today’s N.C.E range of packaged steam boilers are the product of many years of development, that has been heavily influenced by market requirements, and loaded with features and system options to meet the clients Specification.
Item / Type Unit NCE-150SG
NCE-200SG
NCE-300SG
NCE-400SG
NCE-500SG
NCE-1000SG
Rated Evaporation kg/h 150 200 300 400 500 1000
Max. Allowable Working press MPa 1(10kgf/cm2)
Heating Surface m2 1.858 4.2 4.9 4.94 4.99 10
Efficiency % 87 and over 87
Weight kg 250 450 560 730 780 900
Power Source V 220V×1¢ 220V / 380V × 3¢
Total Power Consumption kW 1.15 1.15 1.15 2.25 2.25 2.5
Blower Motor Capacity kW NIL 0.4 0.4 0.75 0.75 0.75
Feed Water Pump Capacity kW 0.75 0.75 0.75 1.5 1.5 2
Boiler Dimension
Width (W) mm 675 800 870 1,130 1,440 1440
Length (L) mm 675 865 1,085 1,300 1,300 1300
Height (H) mm 1575 2,090 2,180 2,010 2,010 2,010
Burner Type - Natural Draft
Forced Draft, first Mixing Blast
Combustion Control System - On-Off High-Low-Off
Ignition - High Voltage Electric Spark
Fuel Consumption
N. Gas Nm3/h 7.5 14.9 22.4 29.9 37.4 60.3
L. P. G Nm3/h 3.3 6.6 9.9 13.2 16.5 26.8
• • • • • •
The above specification is based on the following conditions. -Steam pressure: 10kg/cm2 -Feed water temp : 20℃ -Low heating value for fuel -Fuel gas supply pressure : 200±50mmH2O The measured efficiency is based on low heating value when the boiler is operated in full power. Measurement errors due to inevitable uncertainties are as follow. Boiler efficiency error ±1%, heat input ±3.5% 220V/1¢ is required for soft water to be controlled separately from boiler control unit. For better efficiency and performance of the products, slight modifications can be made without notice. The heating value of fuel is based the following 13A(Natural Gas) High/Low : 11,000/9,900kcal/Nm3
Item / Type Unit NCE-150SG
NCE-200SG
NCE-300SG
NCE-400SG
NCE-500SG
NCE-1500SG
Rated Evaporation kg/h 150 200 300 400 500 1500
Max. Allowable Working press MPa 1(10kgf/cm2)
Heating Surface m2 1.858 4.2 4.9 4.94 4.99 17.92
Efficiency % 87 and over 84
Contained Water ℓ 22 52 61 96 96 400
Weight kg 250 450 560 730 780 3000
Power Source V 220V×1¢ 220V / 380V × 3¢
Total Power Consumption kW 1.15 1.15 1.15 2.25 2.25 5.5
Blower Motor Capacity kW NIL 0.4 0.4 0.75 0.75 2
Feed Water Pump Capacity kW 0.75 0.75 0.75 1.5 1.5 3
Boiler Dimension
Width (W) mm 675 800 870 1,130 1,440 2000
Length (L) mm 675 865 1,085 1,300 1,300 2000
Height (H) mm 1575 2,090 2,180 2,010 2,010 2,500
Burner Type - Natural Draft
Forced Draft, first Mixing Blast
Combustion Control System - On-Off High-Low-Off
Ignition - High Voltage Electric Spark
Fuel Consumption
N. Gas Nm3/h 7.5 14.9 22.4 29.9 37.4 111.0144
L. P. G Nm3/h 3.3 6.6 9.9 13.2 16.5 78
• • • • • •
The above specification is based on the following conditions. -Steam pressure : 10kg/cm2 -Feed water temp : 20℃ -Low heating value for fuel -Fuel gas supply pressure : 200±50mmH2O The measured efficiency is based on low heating value when the boiler is operated in full power. Measurement errors due to inevitable uncertainties are as follow. Boiler efficiency error ±1%, heat input ±3.5% 220V/1¢ is required for soft water to be controlled separately from boiler control unit. For better efficiency and performance of the products, slight modifications can be made without notice. The heating value of fuel is based the following 13A(Natural Gas) High/Low : 11,000/9,900kcal/Nm3