Upload
yogs184
View
232
Download
6
Tags:
Embed Size (px)
DESCRIPTION
BS Code
Citation preview
United Kingdom of Great Britain and Northern Ireland
In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Nulli vendemus, nulli negabimus aut differemus Rectum aut Justiciam.We will sell to no man, we will not deny or defer to any man either Justice or Right.
MAGNA CARTA (1297)
≠ EDICT OF GOVERNMENT ±
BS NA EN 1993-1-1 (2005) (English): UK NationalAnnex to Eurocode 3. Design of steel structures.General rules and rules for buildings
NA to BS EN 1993-1-1:2005
UK National Annex to Eurocode 3: Design of steel structures Part 1-1 : General rules and rules for buildings
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITIED BY COPYRIGHT lAW
raising standards worldwide™
_ .....
NA to BS EN 1993-1-1:2005 BRITISH STANDARD
Publishing and copyright information
The BSI copyright notice displayed in this document indicates when the document was last issued.
© BSI2008
ISBN 978058054960 1
ICS 91.080.10
The following BSI references relate to the work on this standard: Committee reference B/525/31 Draft for comment 07/30128092 DC
Publication history
First published December 2008
Amendments issued since publication
Amd. No. Date Text affected
BRITISH STANDARD
Contents Introduction 1 NA.1 Scope 1
NA to BS EN 1993-1-1 :2005
NA.2 Nationally Determined Parameters 1 NA.3 Decisions on the status of informative annexes 7 NA.4 References to non-contradictory complementary information 7
Bibliography 8
Summary of pages This document comprises a front cover, an inside front cover, pages i to ii, pages 1 to 8, an inside back cover and a back cover.
© 8512008 •
NA to BS EN 1993-1-1 :2005 BRITISH STANDARD
This page deliberately left blank
BRITISH STANDARD
NA.1
NA to BS EN 1993-1-1 :2005
National Annex (informative) to BS EN 1993-1-1:2005, Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Introduction This National Annex has been prepared by BSI Subcommittee B/525/31, Structural use of steel. It is to be used in conjunction with BS EN 1993-1-1:2005.
Scope This National Annex gives:
a) the decisions for the National Determined Parameters described in the following subclauses of BS EN 1993-1-1 :2005:
• 2.3.1(1) • 5.3.2(3) • 6.3.2.4(2)B
• 3.1(2) • 5.3.2(11) • 6.3.3(5)
• 3.2.1(1) • 5.3.4(3) • 6.3.4(1)
• 3.2.2(1) • 6.1 (1) • 7.2.1(1)B
• 3.2.3(1) • 6.1(1)B • 7.2.2(1)B • 3.2.3(3)B • 6.3.2.2(2) • 7.2.3(1)B
• 3.2.4(1)B • 6.3.2.3(1) • BB.1.3(3)B • 5.2.1(3) • 6.3.2.3(2)
• 5.2.2(8) • 6.3.2.4(1)B
b) Decisions on the status of BS EN 1993-1-1 :2005 informative annexes; and
c) References to non-contradictory complementary information.
NA.2 Nationally Determined Parameters
NA.2.1 General Decisions for the Nationally Determined Parameters decided in BS EN 1993-1-1 :2005 are given in clauses NA.2.2 to NA.2.26.
NA.2.2 Actions and environmental influences [BS EN 1993-1-1:2005,2.3.1(1)]
There are no additional regional, climatic or accidental situations to consider.
NA.2.3 Other Steel material and products [BS EN 1993-1-1 :2005, 3.1 (2)]
If other steels are used, due allowance should be made for variations in properties, including ductility and weldability. Further information on the ductility requirements for steel is given in BS EN 1993-1-1:2005,3.2.2(1),
© 8512008 • 1
NA to BS EN 1993-1-1 :2005 BRITISH STANDARD
2 • © BSI 2008
Steel castings and forgings may be used for components in bearings, junctions and other similar parts. Castings should conform to BS EN 10293 and forgings should conform to BS EN 10250-2. Further guidance on steel castings is given in reference [1].
For higher strength steels see BS EN 1993-1-12.
NA.2.4 Material properties [BS EN 1993-1-1:2005, 3.2.1(1)] The nominal values of the yield strength fy and the ultimate strength fu for structural steel should be those obtained from the product standard. The ultimate strength fu should be taken as the lowest value of the range given for Rm in the product standard. Further information on the yield and ultimate strength for structural steel is also given in NA.4.
NA.2.S Ductility requirements [BS EN 1993-1-1 :2005, 3.2.2(1)] a) Elastic global analysis
The limiting values for the ratio fJfy, the elongation at failure and the ultimate strain Cu for elastic global analysis are given below.
fJfy, ~ 1.10;
Elongation at failure not less than 15%;
Cu ~ 1S€y.
b) Plastic global analysis
Plastic global analysis should not be used for bridges. For buildings the limiting values for the ratio fjfy, the elongation at failure and the ultimate strain Cu for plastic global analysis are given below.
fJfy ~ 1.15;
Elongation at failure not less than 15%;
Cu ~ 20cy•
NA.2.6 Fracture toughness [BS EN 1993-1-1:2005, 3.2.3(1)] For buildings and other quasi-statically loaded structures the lowest service temperature in the steel should be taken as the lowest air temperature which may be taken as -5°C for internal steelwork and -15°C for external steelwork.
For bridges the lowest service temperature in the steel should be determined according to the NA to BS EN 1991-1-5 for the bridge location. For structures susceptible to fatigue it is recommended that the requirements for bridges should be applied.
In other cases (e.g. the internal steelwork in cold stores) the lowest service temperature in the steel should be taken as the lowest air temperature expected to occur within the intended design life of the structure.
NA.2.7 Toughness properties for members in compression [BS EN 1993-1-1 :2005, 3.2.3(3)B] The recommendations given in the NA to BS EN 1993-1-10 should be used.
BRITISH STANDARD NA to BS EN 1993-1-1:2005
NA.2.8 Through-thickness properties [BS EN 1993-1-1:2005, 3.2.4(1)B] The recommendations given in the NA to BS EN 1993-1-10 should be used.
NA.2.9 Effects of deformed geometry of the structure [BS EN 1993-1-1 :2005, 5.2.1 (3)] For plastic analysis of clad structures provided that the stiffening effects of masonry infill wall panels or diaphragms of profiled steel sheeting are not taken into account:
U cr ~ 10
For plastic analysis of portal frames subject to gravity loads only with -frame imperfections:
provided the following conditions are satisfied:
a) The span, L, does not exceed 5 times the mean height of the columns
b) hr satisfies the criterion:
(h/sa)2 + (h/sbF ::::;; 0.5
in which sa and sb are the horizontal distances from the apex to the columns.
NOTE For a symmetrical frame this expression simplifies to hr ::::;; 0.2SL.
NA.2.10 Structural stability of frames [BS EN 1993-1-1:2005, 5.2.2(8)] This method should only be used for frames that comply with 5.2.2(6). In such cases the sway moments in the beams and beam-to-column connections should be multiplied by kr unless a smaller value is shown to be adequate by analysis. kr may be evaluated using the following expression provided that Ucr ~ 3.0:
k =_1_ r 1
NA.2.11 Design values of initial local bow imperfection [BS EN 1993-1-1 :2005, 5.3.2(3)] For elastic analysis of the cross-section, the initial imperfections for an individual section about a particular axis should be back-calculated from the formula for the buckling curves given in BS EN 1993-1-1:2005, 6.3 using the elastic section modulus.
For plastic analysis of the cross-section, the initial imperfections for an individual section about a particular axis should be back-calculated from the formula for the buckling curves given in BS EN 1993-1-1:2005, 6.3 using the full plastic section modulus.
© 8512008 • 3
NA to BS EN 1993-1-1:2005 BRITISH STANDARD
4 • © 8512008
NA.2.12 Amplitude of imperfections [BS EN 1993-1-1:2005, 5.3.2(11)] The method given in BS EN 1993-1-1 :2005, 5.3.2(11} should not be used for buildings.
NA.2.13 Imperfections for lateral-torsional bucking in bending [BS EN 1993-1-1 :2005, 5.3.4(3)] The value of k should be taken as 1.0.
NA.2.14 Partial factors for structures not covered by BS EN 1993 Part 2 to Part 6 [BS EN 1993-1-1:2005,6.1(1)] For structures not covered by BS EN 1993 Part 2 to Part 6, the partial factors should be appropriate for the structure and agreed with the client.
NA.2.1S Partial safety factors for buildings [BS EN 1993-1 .. 1 :2005, 6.1(1)] For buildings the following partial factors should be used:
YMO = 1.00
YM1 = 1.00
YM2 = 1.10
NA.2.16 Imperfection factors for lateral torsional buckling [BS EN 1993-1-1 :2005, 6.3.2.2(2)] The recommended values given in BS EN 1993-1-1 :2005, Table 6.3 and Table 6.4 should be used.
NA.2.17 Lateral torsional buckling for rolled sections or equivalent welded sections [BS EN 1993-1-1 :2005, 6.3.2.3(1)] For buildings and bridges the following values of AlT,O and ~ should be used:
a} For rolled sections and hot-finished and cold-formed hollow sections:
ALT;o = 0.4
~ = 0.75
b} For welded sections:
ALT,o = 0.2
~ = 1.00
BRITISH STANDARD
Cross-section
NAto BS EN 1993-1-1:2005
BS EN 1993-1-1:2005, Table 6.5 should be replaced with the following table:
limits Buckling curve
Rolled doubly symmetric I and H sections and hot-finished h/b ~ 2 b hollow sections 2.0 < h/b ~ 3. 1 c
h/b> 3.1 d
Angles (for moments in the major principal plane) d
All other hot-rolled sections. d
Welded doubly symmetric sections and cold-formed h/b ~ 2 c hollow sections 2.0 ~ h/b < 3. 1 d
NA.2.18 Modification factor, f [BS EN 1993-1-1 :2005, 6.3.2.3(2)] The recommended expression for f should be used in which ke is given by:
where:
( Mer for the actual bending moment diagram
1 Mer for a uniform bending moment diagram
values of (1 are given in the references listed in NA.4.
NA.2.19 The slenderness limit Aco [BS EN 1993 .. 1-1:2005, 6.3.2.4(1)B]
For I, H, channel and box sections used in buildings the value of Aeo should be taken as 0.4.
NA.2.20 Modification factor, kfl [BS EN 1993 .. 1-1 :2005, 6.3.2.4(2)B] The value of the modification factor kfl should be taken as:
kfl = 1.0 for hot rolled I-sections;
kfl =1.0 for welded I-sections with h/b ~ 2;
kfl = 0.9 for other sections.
NA.2.21 Interactions factors kyy, kyz, kzyand kzz [BS EN 1993-1-1 :2005, 6.3.3(5)] The interaction factors kyy, kyz' kzy, kzz for doubly symmetric sections may be determined using either alternative Method 1 (given in BS EN 1993-1-1 :2005, Annex A) or alternative Method 2 (given in BS EN 1993-1-1 :2005, Annex B). Alternative Method 2 (given in BS EN 1993-1-1:2005, Annex B) may also be used for sections that are not doubly symmetric when modified in accordance with NA.3.2.
© B512008 • 5
NA to BS EN 1993-1-1:2005 BRITISH STANDARD
Vertical deflection
Cantilevers
NA.2.22 General method for lateral and lateral torsional buckling of structural components [BS EN 1993-1-1 :2005, 6.3.4(1)] This method is only valid for nominally straight components subject to in-plane monoaxial bending and/or compression.
In this method Xop should be taken as the minimum value of X and XLT' Where X is determined in accordance with BS EN 1993-1-1 :2005, 6.3.1 for lateral buckling and XLT is determined in accordance with BS EN 1993-1-1 :2005, 6.3.2 for lateral torsional buckling
NA.2.23 Vertical deflections [BS EN 1993-1-1:2005, 7.2.1(1)B] The following table gives suggested limits for calculated vertical deflections of certain members under the characteristic load combination due to variable loads and should not include permanent loads. Circumstances may arise where greater or lesser values would be more appropriate. Other members may also need deflection limits.
On low pitch and flat roofs the possibility of ponding should be investigated.
Beams carrying plaster or other brittle finish
Other beams (except purlins and sheeting rails)
Purlins and sheeting rails
Length/180
Span/360
Span/200
To suit the characteristics of particular cladding
Horizontal deflection
NA.2.24 Horizontal deflections [BS EN 1993-1-1:2005, 7.2.2(1)B] The following table gives suggested limits for calculated horizontal deflections of certain members under the characteristic load combination due to variable load. Circumstances may arise where greater or lesser values would be more appropriate. Other members may also need deflection limits.
Tops of columns in single-storey buildings except portal frames
Heightl300
Columns in portal frame buildings, not supporting crane runways
In each storey of a building with more than one storey
To suit the characteristics of the particular cladding
Height of that storey/300
NA.2.2S Dynamic effects [BS EN 1993-1-1:2005, 7.2.3(1)B]
6 • © B512008
Reference should be made to specialist literature as appropriate. For floor vibrations see NA.4.
BRITISH STANDARD NA to BS EN 1993-1-1:2005
NA.2.26 Hollow section buckling lengths in lattice girders [BS EN 1993-1-1 :2005, BB.1.3(3)B] The recommended values may be used and further information is given in NA.4.
NA.3 Decisions on the status of informative annexes
NA.3.1 BS EN 1993-1-1:2005, Annex A BS EN 1993-1-1 :2005, Annex A may be used. The scope of Method 1 given in Annex A should be limited to doubly symmetric sections.
NA.3.2 BS EN 1993-1-1:2005, Annex B BS EN 1993-1-1 :2005, Annex B may be used.
Where applied to sections that are not doubly symmetric Xz and Xz should be taken as the values of X and X from the highest value of \ to BS EN 1993-1-1, 6.3.1.3 or X to BS EN 1993-1-1, 6.3.1.4.
Where the sections are not I, H or hollow sections Class 1 and Class 2 sections should be designed as Class 3 sections.
NA.3.3 BS EN 1993-1-1:2005, Annex AB BS EN 1993-1-1:2005, Annex AB may be used.
NA.3.4 BS EN 1993 .. 1-1:2005, Annex BB BS EN 1993-1-1 :2005, Annex BB may be used.
NA.4 References to non-contradictory complementary information References cited in this National Annex to non-contradictory, complementary information can be found at www.steel-ncci.co.uk. Whilst this material is likely to be technically authoritative, not all of it has been reviewed by the UK national committee, and users should satisfy themselves of its fitness for their particular purpose. In particular, they should be aware that material indicated as not having been endorsed by the committee might contain elements that are in conflict with the Eurocode.
© 8512008 • 7
NA to BS EN 1993-1-1:2005
8 • © 8512008
BRITISH STANDARD
Bibliography
Standards publications For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NA to BS EN 1991-1-5, UK National Annex to Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements
BS EN 1993 {Parts 2 to 6}, Eurocode 3 - Design of steel structures
NA to BS EN 1993-1-101), UK National Annex to Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
BS EN 1993-1-12, Eurocode 3: Design of steel structures - Part 1-12: Supplementary rules for high strength steels
BS EN 10025-2:2004, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-al/oy structural steels
BS EN 10250-2, Open steel die forgings for general engineering purposes Part 2: Non-alloy quality and special steels
BS EN 10293, Steel castings for general engineering uses
Other publications [1] Castings in steel construction, SCI publication P 172, The Steel
Construction Institute, Silwood Park, Ascot, Berkshire SLS 70N.
1) In preparation.
Revisions British Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.
It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Similary for PASs, please notify BSI Customer Services.
Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001
BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.
Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: [email protected]
Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website www.bsigroup.com/shop. In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services.
Tel: +44 (0)20 8996 9001 Fax: +44 (0}20 8996 7001 Email: [email protected]
In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.
BSI
389 Chiswick High Road London W4 4AL UK
Tel +44 (0)20 8996 9001 Fax +44 (0)2089967001 www.bsigroup.com/standards
raising standards worldwide™
Information on standards BSI provides a wide range of information on national, European and international standards through its Knowledge Centre.
Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: [email protected]
BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration.
Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: [email protected]
Information regarding online access to British Standards and PASs via British Standards Online can be found at www.bsigroup.com/BSOL
Further information about British Standards is available on the BSI website at www.bsi-group.com/standards
Copyright All the datal software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and sizel type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department
Tel: +44 (0)20 8996 7070 Email: [email protected]
L_ ...... .. -..