CABLE TRAY SYSTEM - Niedax Asia Pacificniedax.com.sg/pdfs/Niedax-KR-2009-usa_Support_System.pdf · 2012-06-14 · 79 Protective Cap Weight per 100 2 kg 348053 EAN code model no. K10

72

CABLE TRAY SYSTEM

73

74

SUPPORT SYSTEM

75

76

Support BracketWeightper 100

5

kg

183708

EANcode

model no.

TK 60.85S

height(H)

60/2,3mm/Inch

length(A)

85/3,3mm/Inch

admissibleload F at L/2

kN

0,1 1 FLM 6x12

acc. incl.

pc.

6,5183807TK 85.110S 85/3,3 110/4,3 0,1 1 FLM 6x12

for wall-mounting

The load rating shown is valid only for proper anchorage to the building structure.

Overhead Hanger and Wall Bracketlight

Weightper 100

25

kg

904808

EANcode

model no.

KTCL 100F

height(H)

106/4,1mm/Inch

length(A)

110/4,3mm/Inch


kN

0,6 2 FLM 6x16 F

acc. incl.

pc.

54904822KTCL 200F 106/4,1 210/8,2 0,6 2 FLM 6x16 F

for mounting on walls or to overhead hangers


Overhead Hanger and Wall Bracketstandard

Weightper 100

52

kg

859801

EANcode

model no.

KTC 100F

height(H)

114/4,4mm/Inch


kN

0,75 2 FLM 6x16 F

acc. incl.

pc.

58859825KTC 200F 114/4,4 0,75 2 FLM 6x16 F75859849KTC 300F 114/4,4 0,75 2 FLM 6x16 F91859863KTC 400F 114/4,4 0,75 2 FLM 6x16 F

for mounting cable tray in areas with little headroom



Weightper 100

190

kg

859887

EANcode

model no.

KTC 500F

height(H)

155/6mm/Inch


kN

2 2 FLM 6x16 F

acc. incl.

pc.

218859900KTC 600F 155/6 2 2 FLM 6x16 F

for mounting cable tray in areas with little headroom


Center HangerC-shaped Frame

Weightper 100

54

kg

843022

EANcode

model no.

ZCB 100F

height(H)

85/3,3mm/Inch

length(A)

104/4,1mm/Inch


kN

0,6

pc.

66843060ZCB 150F 110/4,3 154/6 0,678843084ZCB 200F 135/5,3 204/8 0,690843107ZCB 250F 160/6,2 254/9,9 0,6102843121ZCB 300F 185/7,2 304/11,9 0,6151860401ZCB 400F 235/9,2 404/15,8 0,2

for mounting on the ceiling by means of an M10 size threaded rod


SUPPORT SYSTEM

77

Bracket/Overhead HangerWeightper 100

27

kg

183906

EANcode

model no.

TKS 100S

height(H)

132/5,1mm/Inch

length(A)

163/6,4mm/Inch


kN

1,5 2 FLM 6x12

acc. incl.

pc.

30184002TKS 150S 132/5,1 213/8,3 1,2 2 FLM 6x1239184101TKS 200S 132/5,1 263/10,3 1,1 2 FLM 6x1246184200TKS 250S 132/5,1 313/12,2 0,9 2 FLM 6x1253184309TKS 300S 132/5,1 363/14,2 0,75 2 FLM 6x1259184408TKS 350S 132/5,1 413/16,1 0,6 2 FLM 6x1265184507TKS 400S 132/5,1 463/18,1 0,5 2 FLM 6x1231815500TKS 100 FF 132/5,1 163/6,4 1,5 2 FLM 6x12 F37815524TKS 150 FF 132/5,1 213/8,3 1,2 2 FLM 6x12 F43815548TKS 200 FF 132/5,1 263/10,3 1,1 2 FLM 6x12 F49815562TKS 250 FF 132/5,1 313/12,2 0,9 2 FLM 6x12 F55815586TKS 300 FF 132/5,1 363/14,2 0,75 2 FLM 6x12 F61815609TKS 350 FF 132/5,1 413/16,1 0,6 2 FLM 6x12 F68815623TKS 400 FF 132/5,1 463/18,1 0,5 2 FLM 6x12 F31

329106

TKS 100 E3E3

132/5,1

163/6,4

1,5 2 FLM 6x12 E3

43329205TKS 200 E3E3 132/5,1 263/10,3 1,1 2 FLM 6x12 E355329304TKS 300 E3E3 132/5,1 363/14,2 0,75 2 FLM 6x12 E368329328TKS 400 E3E3 132/5,1 463/18,1 0,5 2 FLM 6x12 E3

for mounting on walls and horizontal ceilings or to overhead hangers

Always use TKSD 20 spacer to avoid deformation of TK... brackets when bolting to wall or ceiling.The load rating shown is valid only for proper anchorage to the building structure.

Overhead HangerWeightper 100

72

kg

184606

EANcode

model no.

TKS 450S

height(H)

132/5,1mm/Inch

length(A)

513/20mm/Inch

2 FLM 6x12

acc. incl.

pc.

77184705TKS 500S 132/5,1 563/22 -90184804TKS 600S 132/5,1 663/25,9 -

815647TKS 450 FF 132/5,1 513/20 2 FLM 6x12 F815661TKS 500 FF 132/5,1 563/22 -815685TKS 600 FF 132/5,1 663/25,9 -

80

329342

TKS 500 E3E3

132/5,1

563/22 -

92329366TKS 600 E3E3 132/5,1 663/25,9 -

for mounting overhead hangers to horizontal ceilings

Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.Always use TKSD 20 spacer to avoid deformation of TK... brackets when bolting to wall or ceiling.

78

SpacerWeightper 100

4

kg

185207

EANcode

model no.

TKSD 20S

pc.

3185252TKSD 20 FF3

329649

TKSD 20 E3E3

for secure wall and/or ceiling mount of TKS type brackets/hangers

TKS ... and TKSU type hangers and bracketsTo be used for: 1. wall and ceiling mount2. for double-sided mounting of hanging supports3. for hanging from ceilings by means of TKSU... and additional fixing of brackets (only with S finish)Please order SKM… bolts separately.


55

kg

184903

EANcode

model no.

TKSU 100S

height(H)

172/6,7mm/Inch

length(A)

161/6,3mm/Inch


kN

0,95 2 FLM 6x12

acc. incl.

pc.

70185009TKSU 200S 172/6,7 261/10,2 0,7 2 FLM 6x1285185108TKSU 300S 172/6,7 361/14,1 0,5 2 FLM 6x12

for wall or ceiling mount

Always use TKSD 20 spacer to avoid deformation of TK... brackets when bolting to wall or ceiling.The load rating shown is valid only for proper anchorage to the building structure.

Support Bracketfor underfloor supports

Weightper 100

20

kg

185306

EANcode

model no.

TKR 50S

height(H)

132/5,1mm/Inch

length(A)

113/4,4mm/Inch


kN

0,55 1 FLM 6x12

acc. incl.

pc.

27185405TKR 100S 132/5,1 163/6,4 0,55 2 FLM 6x12

for mounting pipe (diameter 26-47 mm)including clamping bracket according to DIN 933 standard, electroplatedThe load rating shown is valid only for proper anchorage to the building structure.

SUPPORT SYSTEM

79

Protective CapWeightper 100

2

kg

348053

EANcode

model no.

TKSK 30K10 yellow

color

pc.

To prevent accidents and injuries you must install protective end caps.

to cover the ending of the profile

TKS ... and TKSU type hangers and bracketsTo be used for: Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.

Overhead Hanger and Wall Bracketlight

Weightper 100

20

kg

185504

EANcode

model no.

KTAL 100S

height(H)

60/2,3mm/Inch

length(A)

110/4,3mm/Inch


kN

0,6 2 FLM 6x12

acc. incl.

pc.

25185603KTAL 150S 60/2,3 160/6,2 0,6 2 FLM 6x1230185702KTAL 200S 80/3,1 210/8,2 0,6 2 FLM 6x1239185801KTAL 250S 80/3,1 260/10,1 0,6 2 FLM 6x1243185900KTAL 300S 85/3,3 310/12,1 0,6 2 FLM 6x12



Overhead Hanger and Wall Bracketfor medium loads

Weightper 100

20

kg

186303

EANcode

model no.

KTAM 100S

height(H)

60/2,3mm/Inch

length(A)

110/4,3mm/Inch


kN

1,2 2 FLM 6x12

acc. incl.

pc.

30186402KTAM 200S 80/3,1 210/8,2 1,2 2 FLM 6x1260186501KTAM 300S 82/3,2 320/12,5 1,5 2 FLM 6x1280186600KTAM 400S 82/3,2 420/16,4 1,5 2 FLM 6x12100186709KTAM 500S 115/4,5 510/19,9 1,2 2 FLM 6x12140186808KTAM 600S 115/4,5 610/23,8 1,2 2 FLM 6x1220

840304

KTAM 100 E3E3

60/2,3

110/4,3

1,2 2 FLM 6x12 E3

30840328KTAM 200 E3E3 80/3,1 210/8,2 1,2 2 FLM 6x12 E343840342KTAM 300 E3E3 85/3,3 310/12,1 1,2 2 FLM 6x12 E320

728305

KTAM 100 E5E5

60/2,3

110/4,3

1,2 2 FLM 6x12 E5

30728404KTAM 200 E5E5 80/3,1 210/8,2 1,2 2 FLM 6x12 E560728503KTAM 300 E5E5 85/3,3 310/12,1 1,2 2 FLM 6x12 E560728602KTAM 400 E5E5 115/4,5 410/16 1,2 2 FLM 6x12 E5

52

Hole pattern may vary based on width. You will find more detailed information in the installationinstructions.



80


Weightper 100

20

kg

186907

EANcode

model no.

KTA 100F

height(H)

45/1,8mm/Inch

length(A)

110/4,3mm/Inch


kN

2,5 2 FLM 6x12 F

acc. incl.

pc.

25187003KTA 150F 45/1,8 160/6,2 2,5 2 FLM 6x12 F30187102KTA 200F 55/2,1 210/8,2 2,5 2 FLM 6x12 F40187201KTA 250F 55/2,1 260/10,1 2,5 2 FLM 6x12 F60187300KTA 300F 65/2,5 310/12,1 2,5 2 FLM 6x12 F70187409KTA 350F 65/2,5 360/14 2,5 2 FLM 6x12 F80187508KTA 400F 75/2,9 410/16 2,5 2 FLM 6x12 F90187607KTA 450F 75/2,9 460/17,9 2,5 2 FLM 6x12 F120187706KTA 500F 90/3,5 510/19,9 2,5 2 FLM 6x12 F125187805KTA 550F 90/3,5 560/21,8 2,5 2 FLM 6x12 F135187904KTA 600F 90/3,5 610/23,8 2,5 2 FLM 6x12 F20

330003

KTA 100 E3E3

45/1,8

110/4,3

2,5 2 FLM 6x12 E3

30330102KTA 200 E3E3 55/2,1 210/8,2 2,5 2 FLM 6x12 E360330201KTA 300 E3E3 65/2,5 310/12,1 2,5 2 FLM 6x12 E380330300KTA 400 E3E3 90/3,5 410/16 2,5 2 FLM 6x12 E3120330409KTA 500 E3E3 110/4,3 510/19,9 2,5 2 FLM 6x12 E3135330508KTA 600 E3E3 110/4,3 610/23,8 2,5 2 FLM 6x12 E320

842605

KTA 100 E5E5

45/1,8

110/4,3

2,5 2 FLM 6x12 E5

N30842629KTA 200 E5E5 55/2,1 210/8,2 2,5 2 FLM 6x12 E5N60842643KTA 300 E5E5 65/2,5 310/12,1 2,5 2 FLM 6x12 E5N80842667KTA 400 E5E5 90/3,5 410/16 2,5 2 FLM 6x12 E5N120917402KTA 500 E5E5 110/4,3 510/19,9 2,5 2 FLM 6x12 E5N135917426KTA 600 E5E5 110/4,3 610/23,8 2,5 2 FLM 6x12 E5N

61


slot size Ø7x15 mm for KTA 100-200 in stainless steel finishslot size 7x15 mm for KTA 300-600 in stainless steel finishslot size 7x40 mm for KTA 100-600slot size 7x15 mm for KTA 150, 250, 350, 450 and 550The load rating shown is valid only for proper anchorage to the building structure.


1,4

kg

347056

EANcode

model no.

KA 100-600K10 yellow

color

pc.


to cover the tips of the brackets

support brackets KTA 100 - 600 F, E3 and E5KTU 100 - 600 F, E3 and E5KTT 100 - 600 F

To be used for:


Weightper 100

180

kg

188000

EANcode

model no.

KTA 700F

height(H)

195/7,6mm/Inch

length(A)

730/28,5mm/Inch


kN

3,5 2 FLM 6x12 F

acc. incl.

pc.

200188109KTA 800F 195/7,6 830/32,4 3,5 2 FLM 6x12 F230188208KTA 900F 195/7,6 930/36,3 3,5 2 FLM 6x12 F260188307KTA 1000F 195/7,6 1030/40,2 3,5 2 FLM 6x12 F

61



SUPPORT SYSTEM

81


Weightper 100

180

kg

770809

EANcode

model no.

KTA 700 E3E3

height(H)

150/5,8mm/Inch

length(A)

710/27,7mm/Inch


kN

2 2 FLM 6x12 E3

acc. incl.

pc.

200770823KTA 800 E3E3 150/5,8 810/31,6 2 2 FLM 6x12 E3230770847KTA 900 E3E3 150/5,8 910/35,5 1,5 2 FLM 6x12 E3260770861KTA 1000 E3E3 150/5,8 1010/39,4 1,5 2 FLM 6x12 E3

61



Clamping DeviceWeightper 100

260

kg

838103

EANcode

model no.

KWAT 300F

slotwidth

mm/Inch

22 1 SKM 10x25

acc. incl.

pc.

for installing support brackets in a 45° angle to the I-beam, flange width ≤ 300 mm

KTAL..., KTAM..., KTA..., KTCL... and KTC…type bracketsTo be used for: First install the bracket to the adaptor. When using a 45° adaptor the required length of the bracketdepends on the fitting used.The clamping should be done symetrical and the bolts should be fixed as close as possible to the flange.

hardware has to be ordered separately: 4x HK 610/…, 4x HSK…

Load ratings of brackets used (i. e.: KTAL..., KTAM..., KTA..., KTCL... or KTC...) do apply.The permissible load shown is valid only if the finish of the structural beam and the beam clamps is bare orgalvanized steel.Attention: There is a high risk that clamps could slide off painted surfaces. You have to remove all paintfrom the support structure to ensure maximum load rating.Do not remove any fire-protective painting from steel supports without prior approval in writing fromstructural engineering or construction supervision.Please consult construction supervision or site engineering for statically permissible loads of the buildingstructure.


128,5

kg

815708

EANcode

model no.

KKAT 300F

slotwidth

mm/Inch

22 1 FLM 10x25 F

acc. incl.

pc.

for installing support brackets in a 90° angle to the I-beam, flange width ≤ 300 mm

KTAL..., KTAM..., KTA..., KTCL... and KTC…type bracketsTo be used for: First install the bracket to the adaptor.The clamping should be done symetrical and the bolts should be fixed as close as possible to the flange.

hardware has to be ordered separately:2x HK 610/…, 2x HSK…

Load ratings of brackets used (i. e.: KTAL..., KTAM..., KTA..., KTCL... or KTC...) do apply.The permissible load shown is valid only if the finish of the structural beam and the beam clamps is bare orgalvanized steel.Attention: There is a high risk that clamps could slide off painted surfaces. You have to remove all paintfrom the support structure to ensure maximum load rating.Do not remove any fire-protective painting from steel supports without prior approval in writing fromstructural engineering or construction supervision.Please consult construction supervision or site engineering for statically permissible loads of the buildingstructure.

82

Bracket AdapterWeightper 100

118

kg

838004

EANcode

model no.

KWAE 200F 1 FLM 10x25 F

acc. incl.

pc.

for installing support brackets in a 45° angle to the concrete supports

KTAL..., KTAM..., KTA..., KTCL... and KTC…type bracketsTo be used for: First install the bracket to the adaptor. When using a 45° adaptor the required length of the bracketdepends on the fitting used.

two anchor bolts have to be ordered separatelyLoad ratings of brackets used (i. e.: KTAL..., KTAM..., KTA..., KTCL... or KTC...) do apply.

Wall Bracketheavy-duty

Weightper 100

90

kg

917457

EANcode

model no.

KTAS 100F

height(H)

110/4,3mm/Inch

length(A)

130/5,1mm/Inch


kN

5

pc.

97,8188406KTAS 200F 110/4,3 230/9 5118,3188505KTAS 300F 110/4,3 330/12,9 5141188604KTAS 400F 110/4,3 430/16,8 5

180,8188703KTAS 500F 150/5,8 530/20,7 5207,4188802KTAS 600F 150/5,8 630/24,6 5277,2188901KTAS 700F 150/5,8 730/28,5 5333,1189007KTAS 800F 195/7,6 830/32,4 5374,7189106KTAS 900F 195/7,6 930/36,3 5418,9189205KTAS 1000F 195/7,6 1030/40,2 5130

330515

KTAS 200 E3E3

110/4,3

230/9

5

170330539KTAS 300 E3E3 110/4,3 330/12,9 5200330553KTAS 400 E3E3 110/4,3 430/16,8 5260330577KTAS 500 E3E3 150/5,8 530/20,7 5300330591KTAS 600 E3E3 150/5,8 630/24,6 5

68

for wall-mounting

hardware has to be ordered separately for F finish:for cable tray: FLM 6x12 F and UGM 6 E3for cable ladder: KLTB 6 F and UGM 6 E3 for long span cable ladder: WSTB 2 for long span cable tray: FLM 8x16 Fhardware has to be ordered separately for E3 finish:for cable tray: FLM 6x12 E3, UGM 6 E3for cable ladder: KLTB 6 E3 and UGM 6 E3 for long span cable ladder: WSTB 2 E3 for long span cable tray: FLM 8x16 E3


SUPPORT SYSTEM

83

Wall Bracketextra heavy-duty version

Weightper 100

164

kg

189212

EANcode

model no.

KTASS 200F

height(H)

83/3,2mm/Inch

height (E)

mm/Inch

115

length(A)

230/9mm/Inch


kN

10

admissibleload F2 at L/2

10

pc.

230189229KTASS 300F 108/4,2 140 330/12,9 10 10302189236KTASS 400F 133/5,2 165 430/16,8 10 10360189243KTASS 500F 133/5,2 165 530/20,7 10 9,5444189250KTASS 600F 158/6,2 190 630/24,6 10 9,5570189267KTASS 700F 158/6,2 190 730/28,5 10 8,5651189274KTASS 800F 183/7,1 215 830/32,4 10 8,5758189281KTASS 900F 183/7,1 215 930/36,3 10 7,5847189298KTASS 1000F 208/8,1 240 1030/40,2 10 7,5

for wall-mounting

The permissible load F refers to the bracket only and does not reflect any limitations of the anchoring;permissible load F2 refers to concentrated loads and requires anchor type DAZ 16x25Please recalculate the permissible load for non uniform load distribution using the formula shown.F = support loadR = permissible anchor- or boltstrainI = distance in between load and wall/beamE = distance in between fixing hole and ending

hardware has to be ordered separately for F finish:for cable tray: FLM 6x12 Ffor cable ladder: KLTB 6 F and UGM 6 E3 for long span cable ladder: WSTB 2 for long span cable tray: FLM 8x16 F

The load rating shown is valid only for proper anchorage to the building structure. Please consult structuralengineering for details and local regulations.Please consult construction supervision or site engineering for statically permissible loads of the buildingstructure.


711

kg

838202

EANcode

model no.

KWATS 300F 1 SKM 16x40

acc. incl.

pc.

for installing support brackets in a 45° angle to the I-beam

KTAS and KTASS…type bracketsTo be used for: First install the bracket to the adaptor. When using a 45° adaptor the required length of the bracketdepends on the fitting used.The clamping should be done symetrical and the bolts should be fixed as close as possible to the flange.

hardware has to be ordered separately: 4x HSKS…, 4x SKM 12x70

The load rating shown is valid only if the heavy duty clamp HSKS is used with M12 bolts (8.8 grade).Torque is 85 Nm.Check tightening torque for all kinds of crimp connections with a torque wrench:The permissible load shown is valid only if the finish of all components used (ex. beam clamps) is bare orgalvanized steel.Attention: There is a high risk that clamps could slide off painted surfaces. But please do not remove fire-protective painting from steel supports without prior approval in writing from structural engineering.Please consult construction supervision or site engineering for statically permissible loads of the buildingstructure.

84

Clamping Bracketextra heavy-duty version

Weightper 100

307,7

kg

183616

EANcode

model no.

KTTSS 200F

height(H)

156/6,1mm/Inch

length(A)

230/9mm/Inch


kN

10

admissibleload F2 at L/2

10

pc.

333,3183623KTTSS 300F 156/6,1 330/12,9 10 10371,1183630KTTSS 400F 181/7,1 430/16,8 9,36 10402183647KTTSS 500F 181/7,1 530/20,7 8,89 10

478,4183654KTTSS 600F 206/8 630/24,6 8,53 10521,9183661KTTSS 700F 206/8 730/28,5 7,37 8578,1183678KTTSS 800F 231/9 830/32,4 6,55 7628183685KTTSS 900F 231/9 930/36,3 6,28 6,5

690,6183692KTTSS 1000F 256/10 1030/40,2 5,69 6

68

for mounting on walls or on bare steel beams

The clamping should be done symetrical and the bolts should be fixed as close as possible to the flange.permissible load F at L/2 (flange width ≤ 300 mm), permissible load F2 at L/2 (flange width ≤ 220 mm)

hardware has to be ordered separately: 2x HSKS…, 2x SKM 12x70 for long span cable ladder: WSTB 2 for long span cable tray: FLM 8x16 F

The load rating shown is valid only if the heavy duty clamp HSKS is used with M12 bolts (8.8 grade).Torque is 85 Nm.Check tightening torque for all kinds of crimp connections with a torque wrench:The permissible load shown is valid only if the finish of all components used (ex. beam clamps) is bare orgalvanized steel.Attention: There is a high risk that clamps could slide off painted surfaces. But please do not remove fire-protective painting from steel supports without prior approval in writing from structural engineering.Please consult construction supervision or site engineering for statically permissible loads of the buildingstructure.

Beam Clampheavy-duty version

Weightper 100

21

kg

196425

EANcode

model no.

HSKS 10F

height(H)

10/0,4mm/Inch

5 - 9

flange thickness (t)

mm/Inch

pc.

25196432HSKS 15F 15/0,6 10 - 1427196449HSKS 20F 20/0,8 15 - 1933196456HSKS 25F 25/1 20 - 2441196463HSKS 30F 30/1,2 25 - 2949196470HSKS 35F 35/1,4 30 - 3460196487HSKS 40F 40/1,6 35 - 39

58 68

Hexagonal Boltnut and washer included

Weightper 100

6

kg

207565

EANcode

model no.

SKM 12 X 70V M12

thread

length(A)

70/2,7mm/Inch

8.8

strengthcategory

pc.

1207589SKM 16 X 40V M16 40/1,6 8.8

Property class is embossed to the head of the bolt.Check tightening torque for all kinds of crimp connections with a torque wrench:SKM 8..., tightening torque of 25 NmSKM 10..., tightening torque of 50 NmSKM 12..., tightening torque of 85 NmSKM 16..., tightening torque of 210 Nm

SUPPORT SYSTEM

85

Wall Support BracketWeightper 100

21

kg

189809

EANcode

model no.

WA 100S

widthB

110/4,3mm/Inch

2 FLM 6x12

acc. incl.

pc.

32189908WA 150S 160/6,2 2 FLM 6x1243190003WA 200S 210/8,2 2 FLM 6x1254190102WA 250S 260/10,1 2 FLM 6x1265190201WA 300S 310/12,1 2 FLM 6x1287190300WA 400S 410/16 2 FLM 6x12110190409WA 500S 510/19,9 2 FLM 6x12130190508WA 600S 610/23,8 2 FLM 6x12

for attaching the end of a straight section of cable tray to a wall

Floor Mounting Bracketperforated

Weightper 100

16

kg

191833

EANcode

model no.

RZP 50/100S

height(H)

50/2mm/Inch

widthB

100/3,9mm/Inch

2 FLM 6x12

acc. incl.

pc.

32847907RZP 50/200S 50/2 200/7,8 2 FLM 6x1248847921RZP 50/300S 50/2 300/11,7 2 FLM 6x1264847945RZP 50/400S 50/2 400/15,6 2 FLM 6x1280847969RZP 50/500S 50/2 500/19,5 2 FLM 6x1296847983RZP 50/600S 50/2 600/23,4 2 FLM 6x12

The Z-shaped bracket can be used as a low cost floor mount device for cable trays.Alternate mounting of Z-shaped bracket is recommended.

86

Overhead HangerU-Profile

Weightper 100

42

kg

168705

EANcode

model no.

HUF 50/200F

Totallength L

201/7,8mm/Inch

pc.

49168804HUF 50/250F 255/9,955168903HUF 50/300F 301/11,767169009HUF 50/400F 401/15,682169108HUF 50/500F 501/19,595169207HUF 50/600F 601/23,4109169306HUF 50/700F 705/27,5122169405HUF 50/800F 805/31,4135169504HUF 50/900F 905/35,3149169603HUF 50/1000F 1005/39,2162169702HUF 50/1100F 1105/43,1175169801HUF 50/1200F 1205/4742

327300

HUF 50/200 E3E3

204/8

55327409HUF 50/300 E3E3 304/11,967327508HUF 50/400 E3E3 404/15,882327607HUF 50/500 E3E3 504/19,795327621HUF 50/600 E3E3 604/23,6108872404HUF 50/700 E3E3 704/27,5121872428HUF 50/800 E3E3 804/31,4134872442HUF 50/900 E3E3 904/35,3147872466HUF 50/1000 E3E3 1004/39,242

727506

HUF 50/200 E5E5

204/8

55727605HUF 50/300 E5E5 304/11,967727704HUF 50/400 E5E5 404/15,882727803HUF 50/500 E5E5 504/19,7

Total Load F in NDef

lect

ion

F in

mm

There is no noticeable deflection of the hanger for balanced (twosided) loading.

Thickness of headplate is included in total length indicated.Please be aware of height restrictions for trays and ladders when brackets are mounted onoverhead hangers of 200 mm length only.

KTU..., KTUL..., KTUM... and KTDL… type bracketsTo be used for: For static reasons brackets have to be installed at least 50 mm above hangers end. This will also guaranteean easy mounting of the protective end cap.center distance of the long holes 13x20 mm in the head plate of the hanger: 100 mmThe permissible load shown is valid only for proper anchorage to the building structure. Please consultstructural engineering for details and local regulations.

Load Chart: Deflection of Overhead Hanger (onesided load)


2,5

kg

347605

EANcode

model no.

K 50K10 yellow

color

pc.


silicone-free PVC for covering the ends of profiles

U 50/..., HUF 50/...To be used for: Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.

SUPPORT SYSTEM

87

SpacerWeightper 100

17

kg

171033

EANcode

model no.

UD 24S 1 FLM 10x50

acc. incl.

pc.

17

327652

UD 24 E3E3 1 FLM 10x50 E3

to attach brackets on both sides at the same height

KTUL... and KTUM... brackets mounted on overhead hangers HUF 50/... at a height ofTo be used for:

Bracketfor medium loads

Weightper 100

24

kg

170425

EANcode

model no.

KTUM 100S

height(H)

73/2,8mm/Inch

length(A)

105/4,1mm/Inch


kN

1,2 FLM:2 6x12, 1 10x25 F

acc. incl.

pc.

29170432KTUM 150S 73/2,8 155/6 1,2 FLM:2 6x12, 1 10x25 F33170449KTUM 200S 73/2,8 205/8 1,2 FLM:2 6x12, 1 10x25 F43170456KTUM 250S 73/2,8 255/9,9 1,2 FLM:2 6x12, 1 10x25 F47170463KTUM 300S 73/2,8 305/11,9 1,2 FLM:2 6x12, 1 10x25 F78170487KTUM 400S 83/3,2 405/15,8 1,2 FLM:2 6x12, 1 10x25 F20

329021

KTUM 100 E3E3

73/2,8

105/4,1

1,2 FLM: 2 6x12 E3, 1 10x25 E3

30329045KTUM 200 E3E3 73/2,8 205/8 1,2 FLM: 2 6x12 E3, 1 10x25 E343329069KTUM 300 E3E3 83/3,2 305/11,9 1,2 FLM: 2 6x12 E3, 1 10x25 E375329083KTUM 400 E3E3 83/3,2 405/15,8 1,2 FLM: 2 6x12 E3, 1 10x25 E320

728220

KTUM 100 E5E5

73/2,8

105/4,1

1,2 FLM:2 6x12 E5, 1 10x25 E5

30728244KTUM 200 E5E5 73/2,8 205/8 1,2 FLM:2 6x12 E5, 1 10x25 E543728268KTUM 300 E5E5 83/3,2 305/11,9 1,2 FLM:2 6x12 E5, 1 10x25 E575728282KTUM 400 E5E5 83/3,2 405/15,8 1,2 FLM:2 6x12 E5, 1 10x25 E5

58

HUF 50/...., HDUF 50/...To be used for: The height H2 is 66 mm for the KTUM 400 bracket.The load rating shown is valid only for proper anchorage to the building structure.

Double-sided Bracketlight

Weightper 100

18

kg

170500

EANcode

model no.

KTDL 100S

height(H)

50/2mm/Inch

length(A)

125/4,9mm/Inch


kN

0,6 FLM:4 6x12, 1 10x25 F

acc. incl.

pc.

30170609KTDL 150S 50/2 175/6,8 0,6 FLM:4 6x12, 1 10x25 F44170708KTDL 200S 50/2 225/8,8 0,6 FLM:4 6x12, 1 10x25 F58170807KTDL 250S 50/2 275/10,7 0,6 FLM:4 6x12, 1 10x25 F71170906KTDL 300S 50/2 325/12,7 0,6 FLM:4 6x12, 1 10x25 F85171002KTDL 400S 50/2 425/16,6 0,6 FLM:4 6x12, 1 10x25 F

HUF 50/....To be used for: The load rating shown is valid only for proper anchorage to the building structure.

88

Center HangerWeightper 100

160

kg

189304

EANcode

model no.

ZKU 150F

height(H)

472/18,4mm/Inch

length(A)

160/6,2mm/Inch


kN

2 FLM:2 6x12, 1 10x25 F

acc. incl.

pc.

170189403ZKU 200F 472/18,4 210/8,2 2 FLM:2 6x12, 1 10x25 F200189502ZKU 300F 472/18,4 310/12,1 2 FLM:2 6x12, 1 10x25 F240189601ZKU 400F 472/18,4 410/16 2 FLM:2 6x12, 1 10x25 F

59

HUF 50/....To be used for: The load rating shown is valid only for proper anchorage to the building structure.

Profile U 50Weightper 100

26

kg

190805

EANcode

model no.

U 50/200S

length(A)

200/7,8mm/Inch

pc.

39190904U 50/300S 300/11,752191000U 50/400S 400/15,665191109U 50/500S 500/19,578191208U 50/600S 600/23,491191307U 50/700S 700/27,3104191406U 50/800S 800/31,2117191505U 50/900S 900/35,1130191604U 50/1000S 1000/39195191703U 50/1500S 1500/58,5130191802U 50/2000S 2000/78130190607U 50/3000S 3000/117130190706U 50/6000S 6000/23426872503U 50/200 FF 200/7,8N39872534U 50/300 FF 300/11,7N52872565U 50/400 FF 400/15,6N65872596U 50/500 FF 500/19,5N78872626U 50/600 FF 600/23,4N91872657U 50/700 FF 700/27,3N104872688U 50/800 FF 800/31,2N117872718U 50/900 FF 900/35,1N130872749U 50/1000 FF 1000/39N130190744U 50/3000 FF 3000/117N130190768U 50/6000 FF 6000/234N

130

330805

U 50/3000 E3E3

3000/117

130330904U 50/6000 E3E3 6000/234130

728701

U 50/3000 E5E5

3000/117

no perforation in flange with stainless finish

for custom-built overhead hangers and for building support frames

SUPPORT SYSTEM

89

Splice PlateWeightper 100

22

kg

199303

EANcode

model no.

VB 50F

thickness (t)

mm/Inch

4 4 FLM 10x25 F

acc. incl.

pc.

22

330966

VB 50 E3E3

4 4 FLM 10x25 E3

22

729005

VB 50 E5E5

4 4 SKM 10x25 E5

2 pieces needed per spliceprofiles U 50/..., U 5050/... and overhead hanger HU 5050/...To be used for:

50 mm center distance for punch holes 12x30 mm

Head PlateWeightper 100

40

kg

191901

EANcode

model no.

KU 50F

Totallength L

105/4,1mm/Inch

thickness ofthe head plate (t)

mm/Inch

5 2 FLM 10x25 F

acc. incl.

pc.

40

330607

KU 50 E3E3

104/4,1

4 2 FLM 10x25 E3

40

728800

KU 50 E5E5

104/4,1

4 2 SKM 10x25 E5

Thickness of headplate is included in total length indicated.

for mounting on horizontal ceilings

U 50/... ProfileTo be used for: 50 mm center distance for long holes 13x20 mm in the head plate


70

kg

192007

EANcode

model no.

KUD 50F

Totallength L

105/4,1mm/Inch


mm/Inch

5 2 FLM 10x25 F

acc. incl.

pc.

70

330706

KUD 50 E3E3

105/4,1

5 2 FLM 10x25 E3

58



Back to Back U 50 ProfileTo be used for: 50 mm center distance for punch holes 13x20 mm

Head Platevertical, adjustable from -30° to +30°

Weightper 100

90

kg

192106

EANcode

model no.

KUGV 50F

Totallength L

111/4,3mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.

90

770908

KUGV 50 E3E3

111/4,3

6 2 FLM 10x25 E3


for mounting on inclined ceilings

U 50/... ProfileTo be used for: 152 mm center distance for punch holes 13x28 mm50 mm center distance for punch holes 13x38 mm

Head Platehorizontal, adjustable from -30° to +30°

Weightper 100

90

kg

192205

EANcode

model no.

KUGH 50F

Totallength L

106/4,1mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.

90

770922

KUGH 50 E3E3

106/4,1

6 2 FLM 10x25 E3



U 50/... ProfileTo be used for: 152 mm center distance for punch holes 13x28 mm50 mm center distance for punch holes 13x38 mm

90

All-Purpose Clamping Head PlateWeightper 100

150

kg

192243

EANcode

model no.

KUDU 50F

slotwidth

mm/Inch

22 2 FLM 10x25 F

acc. incl.

pc.

for clamping to horizontal support beams (max. width 240 mm)

U 50/..., U 5050/...ProfileTo be used for: Installation mode: 1. parallel to beam2. crosswise to the beamhardware has to be ordered separately: 2x HK 610/…, 2x HSKS…

SUPPORT SYSTEM

91

All-Purpose Clamping Head Plateadjustable from -30° to +30°

Weightper 100

150

kg

192267

EANcode

model no.

KUGU 50F

slotwidth

mm/Inch

22 2 FLM 10x25 F

acc. incl.

pc.

for clamping U-profile to support beams (max. width 240 mm), horizontally adjustable

U 50/..., U 5050/....ProfileTo be used for: Installation mode: 1. parallel to beam2. crosswise to the beamhardware has to be ordered separately: 2x HK 610/…, 2x HSKS…

92

Clamping Head PlateWeightper 100

150

kg

194803

EANcode

model no.

KUDK 50F

slotwidth

mm/Inch

18

Totallength L

107/4,2mm/Inch

thickness of the head plate (t)

mm/Inch

7 2 FLM 10x25 F

acc. incl.

pc.

150

770960

KUDK 50 E3E3

18

107/4,2

7 2 FLM 10x25 E3



U 50/... ProfileTo be used for: Installation mode: crosswise to the support beamhardware has to be ordered separately for F finish: 4x HK 510/…E3, 4x HSK…E3hardware has to be ordered separately for E3 finish: 4x HK 510/…E5, 4x HSK…E3

Clamping Head Plateadjustable from -30° to +30°

Weightper 100

230

kg

195404

EANcode

model no.

KUGK 50F

slotwidth

mm/Inch

18

Totallength L

113/4,4mm/Inch


mm/Inch

8 2 FLM 10x25 F

acc. incl.

pc.

230

770984

KUGK 50 E3E3

18

113/4,4

8 2 FLM 10x25 E3



U 50/... ProfileTo be used for: Installation mode: crosswise to the support beamhardware has to be ordered separately for F finish: 4x HK 510/…E3, 4x HSK…E3hardware has to be ordered separately for E3 finish: 4x HK 510/…E5, 4x HSK…E3

SUPPORT SYSTEM

93


125

kg

195107

EANcode

model no.

KUDP 50F

slotwidth

mm/Inch

18 2 FLM 10x25 F

acc. incl.

pc.

125

770946

KUDP 50 E3E3

18 2 FLM 10x25 E3


U 50/... ProfileTo be used for: Installation mode: in parallel to the support beammounting parts have to be ordered separately for F finish: 2x HK 510/..., 2x HSK…hardware has to be ordered separately for E3 finish: 2x HK 510/…E3, 2x HSK…E3


Weightper 100

95

kg

195503

EANcode

model no.

KUGP 50F

slotwidth

mm/Inch

18 2 FLM 10x25 F

acc. incl.

pc.

95

770991

KUGP 50 E3E3

18 2 FLM 10x25 E3


U 50/... ProfileTo be used for: Installation mode: in parallel to the support beamhardware has to be ordered separately for F finish: 2x HK 510/..., 2x HSK…hardware has to be ordered separately for E3 finish: 2x HK 510/…E3, 2x HSK…E3

94


Weightper 100

260

kg

195602

EANcode

model no.

KUGPN 50F

slotwidth

mm/Inch

22 2 FLM 10x25 F

acc. incl.

pc.

for clamping U-profile to support beams (max. width 240 mm), horizontally and vertically adjustable

U 50/... ProfileTo be used for: Installation mode: in parallel to the support beamhardware has to be ordered separately for F finish: 2x HK 610/..., 2x HSKS…

SUPPORT SYSTEM

95


Weightper 100

90

kg

858705

EANcode

model no.

HU 5050/200F

Totallength L

205/8mm/Inch

pc.

103858729HU 5050/250F 255/9,9115858743HU 5050/300F 305/11,9138858767HU 5050/400F 405/15,8160858781HU 5050/500F 505/19,7186858804HU 5050/600F 605/23,6210858828HU 5050/700F 705/27,5233858842HU 5050/800F 805/31,4256858866HU 5050/900F 905/35,3280858880HU 5050/1000F 1005/39,2304858903HU 5050/1100F 1105/43,1328858927HU 5050/1200F 1205/47400858941HU 5050/1500F 1505/58,7517858965HU 5050/2000F 2005/78,2

Total Load F in N

Def

lect

ion

F in

mm


61


KTAL…, KTAM…, and KTA… bracketsTo be used for: Use appropriate HDS... spacer for mounting brackets on overhead hanger.For static reasons brackets have to be installed at least 50 mm above hangers end. This will also guaranteean easy mounting of the protective end cap.center distance of the long holes 13x20 mm in the head plate of the hanger: 100 mm50 mm center distance for punch holes 13x40 mm on all 3 sides of the railThe permissible load shown is valid only for proper anchorage to the building structure. Please consultstructural engineering for details and local regulations.


Spacer for Overhead HangerWeightper 100

7,5

kg

931705

EANcode

model no.

HDS 50.50 FF 1 SKM 10x80 F

acc. incl.

N

pc.

profile U 5050/... and overhead hanger HU 5050/..To be used for: Use appropriate HDS... spacer for mounting brackets on overhead hanger.

96


3

kg

347025

EANcode

model no.

K 5050K10 yellow

color

pc.


to cover the ending of the profile

profile U 5050/... and overhead hanger HU 5050/..To be used for: Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.


72

kg

918560

EANcode

model no.

U 5050/300 FF

length(A)

300/11,7mm/Inch

pc.

96918584U 5050/400 FF 400/15,6120918607U 5050/500 FF 500/19,5144918621U 5050/600 FF 600/23,4168918645U 5050/700 FF 700/27,3192918669U 5050/800 FF 800/31,2216918683U 5050/900 FF 900/35,1240918706U 5050/1000 FF 1000/39263918720U 5050/1100 FF 1100/42,9287918744U 5050/1200 FF 1200/46,8359918768U 5050/1500 FF 1500/58,5240918782U 5050/2000 FF 2000/78240859306U 5050/3000 FF 3000/117

859313U 5050/4500 FF 4500/175,5240859320U 5050/6000 FF 6000/234

61


50 mm center distance for punch holes 13x40 mm on all 3 sides of the rail

Splice PlateWeightper 100

22

kg

199303

EANcode

model no.

VB 50F

thickness (t)

mm/Inch

4 4 FLM 10x25 F

acc. incl.

pc.

22

330966

VB 50 E3E3

4 4 FLM 10x25 E3

22

729005

VB 50 E5E5

4 4 SKM 10x25 E5

2 pieces needed per spliceprofiles U 50/..., U 5050/... and overhead hanger HU 5050/...To be used for:

50 mm center distance for punch holes 12x30 mm

SUPPORT SYSTEM

97


81

kg

191956

EANcode

model no.

KU 5050F

Totallength L

105/4,1mm/Inch


mm/Inch

5 2 FLM 10x25 F

acc. incl.

pc.61



U 5050/... ProfileTo be used for: 100 mm center distance for long holes 13x20 mm in the head plateU-shaped splice plate perforated with slots (12x40 mm) on all three sides.

Head Platehorizontal, adjustable from -30° to +30°

Weightper 100

181

kg

192229

EANcode

model no.

KUGH 5050F

Totallength L

106/4,1mm/Inch


mm/Inch

6 2 SKM 10x80 F

acc. incl.

pc.



U 5050/... ProfileTo be used for: 152 mm center distance for long holes 13x28 mm in the head plate of the hanger


181

kg

192151

EANcode

model no.

KUGV 5050F

Totallength L

111/4,3mm/Inch


mm/Inch

6 2 SKM 10x80 F

acc. incl.

pc.



U 5050/...To be used for: 152 mm center distance for long holes 13x28 mm in the head plate of the hanger


184

kg

194858

EANcode

model no.

KUDK 5050F

slotwidth

mm/Inch

18

Totallength L

107/4,2mm/Inch


mm/Inch

7 2 FLM 10x25 F

acc. incl.

pc.



U 5050/... ProfileTo be used for: U-shaped splice plate perforated with slots (12x40 mm) on all three sides.Installation mode: crosswise to the support beamhardware has to be ordered separately: 4x HK 510/..., 4x HSK…

98


Weightper 100

248

kg

195657

EANcode

model no.

KUGPK 5050F

slotwidth

mm/Inch

18

Totallength L

112/4,4mm/Inch


mm/Inch

7 2 SKM 10x80 F

acc. incl.

pc.



U 5050/... ProfileTo be used for: Installation mode: crosswise to the support beamhardware has to be ordered separately: 4x HK 510/..., 4x HSK…


132

kg

195152

EANcode

model no.

KUDP 5050F

slotwidth

mm/Inch

22 2 FLM 10x25 F

acc. incl.

pc.


U 5050/... ProfileTo be used for: Installation mode: in parallel to the support beamU-shaped splice plate perforated with slots (12x40 mm) on all three sides.hardware has to be ordered separately: 2x HK 610/…, 2x HSKS…

SUPPORT SYSTEM

99


Weightper 100

197

kg

195558

EANcode

model no.

KUGP 5050F

slotwidth

mm/Inch

22 2 SKM 10x80 F

acc. incl.

pc.


U 5050/... ProfileTo be used for: Installation mode: in parallel to the support beamhardware has to be ordered separately: 2x HK 610/…, 2x HSKS…

100


Weightper 100

141

kg

891450

EANcode

model no.

HU 6040/200F

Totallength L

206/8mm/Inch

pc.

157891467HU 6040/250F 256/10174891474HU 6040/300F 306/11,9208891481HU 6040/400F 406/15,8241891498HU 6040/500F 506/19,7275891504HU 6040/600F 606/23,6308891511HU 6040/700F 706/27,5342891528HU 6040/800F 806/31,4376891535HU 6040/900F 906/35,3409891542HU 6040/1000F 1006/39,2443891559HU 6040/1100F 1106/43,1476891566HU 6040/1200F 1206/47577891573HU 6040/1500F 1506/58,7745891580HU 6040/2000F 2006/78,2140

891825

HU 6040/200 E3E3

206/8

157891832HU 6040/250 E3E3 256/10101891849HU 6040/300 E3E3 306/11,9135891856HU 6040/400 E3E3 406/15,8168891863HU 6040/500 E3E3 506/19,7202891870HU 6040/600 E3E3 606/23,6236891887HU 6040/700 E3E3 706/27,5269891894HU 6040/800 E3E3 806/31,4303891900HU 6040/900 E3E3 906/35,3335891917HU 6040/1000E3E3 1006/39,2370891924HU 6040/1100E3E3 1106/43,1403891931HU 6040/1200E3E3 1206/47437891948HU 6040/1500E3E3 1506/58,7670891955HU 6040/2000E3E3 2006/78,2

Total Load F in N

Def

lect

ion

F in

mm


61


KTAL…, KTAM…, and KTA… bracketsTo be used for: Use appropriate HDS... spacer for mounting brackets on overhead hanger.For static reasons brackets have to be installed at least 50 mm above hangers end. This will also guaranteean easy mounting of the protective end cap.center distance of the long holes 13x28 mm in the head plate of the hanger: 152 mm50 mm center distance for punch holes 13x40 mm on all 3 sides of the railThe permissible load shown is valid only for proper anchorage to the building structure. Please consultstructural engineering for details and local regulations.


SUPPORT SYSTEM

101

Spacer for Overhead HangerWeightper 100

8,5

kg

931729

EANcode

model no.

HDS 60.40 FF 1 SKM 10x90 F

acc. incl.

N

pc.

profile U 6040/... and overhead hanger HU 6040/...To be used for: Use appropriate HDS... spacer for mounting brackets on overhead hanger.


3

kg

912162

EANcode

model no.

SKU 6040K03 yellow

color

pc.



profile U 6040/... and overhead hanger HU 6040/...To be used for: Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.


67

kg

891603

EANcode

model no.

U 6040/200 FF

length(A)

200/7,8mm/Inch

pc.

84891610U 6040/250 FF 250/9,8101891627U 6040/300 FF 300/11,7134891634U 6040/400 FF 400/15,6168891641U 6040/500 FF 500/19,5201891658U 6040/600 FF 600/23,4235891665U 6040/700 FF 700/27,3269891672U 6040/800 FF 800/31,2302891689U 6040/900 FF 900/35,1336891696U 6040/1000 FF 1000/39369891702U 6040/1100 FF 1100/42,9403891719U 6040/1200 FF 1200/46,8504891726U 6040/1500 FF 1500/58,5336891733U 6040/2000 FF 2000/78336891740U 6040/3000 FF 3000/117336891764U 6040/6000 FF 6000/23468

891962

U 6040/200 E3E3

200/7,8

83891979U 6040/250 E3E3 250/9,8101891986U 6040/300 E3E3 300/11,7135891993U 6040/400 E3E3 400/15,6168892006U 6040/500 E3E3 500/19,5202892013U 6040/600 E3E3 600/23,4236892020U 6040/700 E3E3 700/27,3269892037U 6040/800 E3E3 800/31,2303892044U 6040/900 E3E3 900/35,1335892051U 6040/1000 E3E3 1000/39370892068U 6040/1100 E3E3 1100/42,9403892075U 6040/1200 E3E3 1200/46,8437892082U 6040/1500 E3E3 1500/58,5335892099U 6040/2000 E3E3 2000/78335892105U 6040/3000 E3E3 3000/117335892129U 6040/6000 E3E3 6000/234

61


50 mm center distance for punch holes 13x40 mm on all 3 sides of the rail

102

Straight Splice PlateWeightper 100

45

kg

891788

EANcode

model no.

VB 6040F 4 FLM 10x25 F

acc. incl.

pc.

45

892143

VB 6040 E3E3 4 FLM 10x25 E3

profile U 6040/...To be used for: Profile perforated with slots (11x18 mm) on all three sides.


110

kg

891771

EANcode

model no.

KU 6040F

Totallength L

106/4,1mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.

110

892136

KU 6040 E3E3

106/4,1

6 2 FLM 10x25 E3



U 6040/... ProfileTo be used for: center distance of the long holes 13x28 mm in the head plate: 152 mm50 mm center distance for long holes 13x20 mm in the connector/splice

Overhead HangerI 80 Profile

Weightper 100

200

kg

178407

EANcode

model no.

HI 80/200F

Totallength L

206/8mm/Inch

pc.

240178506HI 80/300F 306/11,9300178605HI 80/400F 406/15,8360178704HI 80/500F 506/19,7420178803HI 80/600F 606/23,6480178902HI 80/700F 706/27,5540179008HI 80/800F 806/31,4600179107HI 80/900F 906/35,3660179206HI 80/1000F 1006/39,2720179305HI 80/1100F 1106/43,1780179404HI 80/1200F 1206/47840179503HI 80/1300F 1306/50,9900179602HI 80/1400F 1406/54,8960179701HI 80/1500F 1506/58,71020179800HI 80/1600F 1606/62,61080179909HI 80/1700F 1706/66,51140180004HI 80/1800F 1806/70,41200180103HI 80/1900F 1906/74,31260180202HI 80/2000F 2006/78,2

Total Load F in N

Def

lect

ion

F in

mm


60 68


KTT…, KTTS… type bracketsTo be used for: For static reasons brackets have to be installed at least 50 mm above hangers end. This will also guaranteean easy mounting of the protective end cap.center distance of the long holes 13x28 mm in the head plate: 152 mmcenter distance of the long holes 13x38 mm in the head plate of the hanger: 50 mmThe permissible load shown is valid only for proper anchorage to the building structure. Please consultstructural engineering for details and local regulations.


SUPPORT SYSTEM

103


2

kg

912605

EANcode

model no.

SKI 80K03 yellow

color

pc.59 60



profile I 80/... and overhead hanger HI 80/... and vertical cable ladder STIC... and STIW...To be used for: Brackets have to be installed at least 50 mm above hangers end to allow an easy mounting of theprotective end cap.

Bracketmedium-duty with preinstalled clamp

Weightper 100

25

kg

181605

EANcode

model no.

KTT 100F

height(H)

55/2,1mm/Inch

length(A)

110/4,3mm/Inch


kN

2,5 2 FLM 6x12

acc. incl.

pc.

40181803KTT 200F 55/2,1 210/8,2 2,5 2 FLM 6x1260182008KTT 300F 75/2,9 310/12,1 2,5 2 FLM 6x1285182206KTT 400F 95/3,7 410/16 2,5 2 FLM 6x1235181704KTT 150F 55/2,1 160/6,2 2,5 2 FLM 6x1250181902KTT 250F 75/2,9 260/10,1 2,5 2 FLM 6x1270182107KTT 350F 75/2,9 360/14 2,5 2 FLM 6x12100182305KTT 450F 95/3,7 460/17,9 2,5 2 FLM 6x12126182503KTT 550F 95/3,7 560/21,8 2,5 2 FLM 6x12116182404KTT 500F 95/3,7 510/19,9 2,5 2 FLM 6x12136182602KTT 600F 95/3,7 610/23,8 2,5 2 FLM 6x12

profile I 80/... as well as overhead hanger HI 80/...To be used for: long hole size 7x40 mm for KTT 100-400long hole size 7x40 mm for KTT 150, 250, 350, 450 and 550long hole size 7x38 mm for KTT 500 and 600

mounting hardware has to be ordered separately: for cable ladders 2x KLTB 6 and 2x UGM 6The load rating shown is valid only for proper anchorage to the building structure.


1,4

kg

347056

EANcode

model no.

KA 100-600K10 yellow

color

pc.


to cover the tips of the brackets

support brackets KTA 100 - 600 F, E3 and E5KTU 100 - 600 F, E3 and E5KTT 100 - 600 F

To be used for:

Bracketheavy-duty with pre-installed clamp

Weightper 100

80,8

kg

182800

EANcode

model no.

KTTS 200F

height(H)

110/4,3mm/Inch

length(A)

230/9mm/Inch


kN

5

pc.

101,2182909KTTS 300F 110/4,3 330/12,9 5123,9183005KTTS 400F 110/4,3 430/16,8 5158,9183104KTTS 500F 150/5,8 530/20,7 5

60 68

profile I 80/... and overhead hanger HI 80/...To be used for:

hardware has to be ordered separately:for cable tray: FLM 6x12for cable ladder: KLTB 6 and UGM 6 for long span cable ladder: WSTB 2 for long span cable tray: FLM 8x16 F


104

Bracketheavy-duty with two pre-installed clamps

Weightper 100

197,9

kg

183203

EANcode

model no.

KTTS 600F

height(H)

150/5,8mm/Inch

length(A)

630/24,6mm/Inch


kN

5

pc.

267,7183302KTTS 700F 150/5,8 730/28,5 5316,9183401KTTS 800F 190/7,4 830/32,4 5358,5183500KTTS 900F 190/7,4 930/36,3 5402,7183609KTTS 1000F 190/7,4 1030/40,2 5

60 68


hardware has to be ordered separately:for cable tray: FLM 6x12for cable ladder: KLTB 6 and UGM 6 for long span cable ladder: WSTB 2 for long span cable tray: FLM 8x16 F


Profile I 80according to DIN 1025 standard

Weightper 100

120

kg

180301

EANcode

model no.

I 80/200F

length(A)

200/7,8mm/Inch

pc.

180180400I 80/300F 300/11,7240180509I 80/400F 400/15,6300180608I 80/500F 500/19,5360180707I 80/600F 600/23,4420180806I 80/700F 700/27,3480180905I 80/800F 800/31,2540181001I 80/900F 900/35,1600181100I 80/1000F 1000/39900181209I 80/1500F 1500/58,51200181308I 80/2000F 2000/78600181407I 80/3000F 3000/117600181506I 80/6000F 6000/234

59 60

for custom-built overhead hangers, vertical cable ladders STIC/STIW and for building support frames

SUPPORT SYSTEM

105

Straight Splice PlateWeightper 100

152

kg

199501

EANcode

model no.

VBI 80F 4 FLM 10x25 F

acc. incl.

pairs

4 pieces required per jointprofile I 80/... and overhead hanger HI 80/...To be used for:


150

kg

192908

EANcode

model no.

KI 80F

Totallength L

151/5,9mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.



profile I 80/...To be used for: 152 mm center distance for long holes 13x28 mm in the head plate of the hanger50 mm center distance for long holes 13x38 mm in the head plate

Head Plate Extender DeviceWeightper 100

224

kg

911882

EANcode

model no.

KIA 80F

pc.61 60

for extending the center distance in between the anchors and to increase the load rating of the overheadhanger HI 80/…

overhead hanger HI 80/... and I 80/…profile with head plate KI 80/…To be used for:

Head Platecrosswise to profile I 80

Weightper 100

134

kg

903009

EANcode

model no.

KIQ 80F

Totallength L

151/5,9mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.



profile I 80/...To be used for: 152 mm center distance for long holes 13x28 mm in the head plate of the hanger

106


290

kg

195008

EANcode

model no.

KIDK 80F

slotwidth

mm/Inch

22

Totallength L

153/6mm/Inch


mm/Inch

8 2 FLM 10x25 F

acc. incl.

pc.59



profile I 80/...To be used for: Installation mode: crosswise to the support beamhardware has to be ordered separately: 4x HK 610/…, 4x HSKS…


225

kg

195305

EANcode

model no.

KIDP 80F

slotwidth

mm/Inch

22 2 FLM 10x25 F

acc. incl.

pc.59


profile I 80/...To be used for: Installation mode: in parallel to the support beamhardware has to be ordered separately: 2x HK 610/..., 2x HSKS…

SUPPORT SYSTEM

107

Head Platevertical, adjustable from -50° to +50°

Weightper 100

156

kg

193103

EANcode

model no.

KIGV 80F

Totallength L

261/10,2mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.


for mounting on inclined ceilings and support beams

profile I 80/...To be used for: Installation mode: in parallel to the support beam152 mm center distance for long holes 13x28 mm in the head plate of the hanger50 mm center distance for long holes 13x38 mm in the head plateUnit is preassembled.

Head Plateadjustable from -50° to +50°

Weightper 100

156

kg

922352

EANcode

model no.

KIGVQ 80F

Totallength L

261/10,2mm/Inch


mm/Inch

6 2 FLM 10x25 F

acc. incl.

pc.


for mounting on inclined ceilings and support beams

profile I 80/...To be used for: Installation mode: crosswise to the support beam152 mm center distance for long holes 13x28 mm in the head plate of the hangerUnit is preassembled.

Tee ConnectorWeightper 100

96

kg

192809

EANcode

model no.

VBIQ 80F 2 FLM 12x30 F

acc. incl.

pairs

2 pieces required per joint


Wall Supportsymmetric

Weightper 100

26,7

kg

193004

EANcode

model no.

WWI 80F 1 FLM 12x30 F

acc. incl.

pc.

59

for mounting I 80/… profiles to the wall

profile I 80/…, overhead hangers HI 80/… and vertical cable ladders of type STIC.... andSTIW...

To be used for:

108

C-rail 2917C-rail, slot width 12 mm, solid

Weightper 100

95,7

kg

035700

EANcode

model no.

2917/2 BOB

length(A)

2000/78mm/Inch

m

95,80358092917/6 BOB 6000/23495,70296002917/4 GOG 4000/156102,50359082917/2 FOF 2000/78102,50360042917/6 FOF 6000/234

C-rail 2970C-rail, slot width 16 mm, solid, according to DIN EN 60715 standard

Weightper 100

76

kg

036202

EANcode

model no.

2970/2 BOB

length(A)

2000/78mm/Inch

m

760363012970/6 BOB 6000/234760365542970/2 VOV 2000/78760298082970/2 GOG 2000/78760300022970/4 GOG 4000/156760368062970/2 SOS 2000/78760370012970/6 SOS 6000/234800365092970/2 FOF 2000/78800366082970/6 FOF 6000/23476

037902

2970/2 E3E3

2000/78

760380082970/6 E3E3 6000/234

C-rail 2970C-rail, slot width 16 mm, perforated, according to DIN EN 60715 standard

Weightper 100

72

kg

030101

EANcode

model no.

2970/2 GLG

length(A)

2000/78mm/Inch

9x15

perforation

mm/Inch

distance between drill holes

mm/Inch

25

m

720302002970/4 GLG 4000/156 9x15 25650303092970/2 SLS 2000/78 9x15 25

SUPPORT SYSTEM

109

C-rail 2970C-rail, slot width 16 mm, according to DIN EN 60715 standard

Weightper 100

75

kg

342204

EANcode

model no.

2970/6 E3LE3

length(A)

6000/234mm/Inch

7,5xØ15

perforation

mm/Inch


mm/Inch

25

m

with special perforation

C-rail 2970C-rail, slot width 16 mm, one hole at each end, according to DIN EN 60715 standard

Weightper 100

8

kg

037841

EANcode

model no.

2970/100-2 SLS

length(A)

100/3,9mm/Inch

2xØ6,5

perforation

mm/Inch

pc.

160373082970/200-2 SLS 200/7,8 2xØ6,5240376052970/300-2 SLS 300/11,7 2xØ6,5320372092970/400-2 SLS 400/15,6 2xØ6,5400377042970/500-2 SLS 500/19,5 2xØ6,5

two drill holes

C-rail 2970C-rail, slot width 16 mm, three holes, according to DIN EN 60715 standard

Weightper 100

7,8

kg

037407

EANcode

model no.

2970/100-3 SLS

length(A)

100/3,9mm/Inch

3xØ6,5

perforation

mm/Inch

pc.

three drill holes

110


Weightper 100

80

kg

040209

EANcode

model no.

2975/2 BOB

length(A)

2000/78mm/Inch

m

800403082975/6 BOB 6000/234800411072975/2 SOS 2000/78800414042975/6 SOS 6000/234860406052975/1 FOF 1000/39860407042975/2 FOF 2000/78860408032975/6 FOF 6000/234

C-rail 2975C-rail, slot width 16 mm, perforated

Weightper 100

81

kg

040728

EANcode

model no.

2975/2 FLF

length(A)

2000/78mm/Inch

9,5x30

perforation

mm/Inch


mm/Inch

50

m

C-rail 2975C-rail, slot width 16 mm, one centric hole

Weightper 100

8,5

kg

040759

EANcode

model no.

2975/0.100 FLF

length(A)

100/3,9mm/Inch

9x15

perforation

mm/Inch

pc.

12,80407662975/0.150 FLF 150/5,8 9x15

one center hole

SUPPORT SYSTEM

111

C-rail 2975C-rail, slot width 16 mm, one centric hole

Weightper 100

17,2

kg

040773

EANcode

model no.

2975/0.200 FLF

length(A)

200/7,8mm/Inch

9x15

perforation

mm/Inch

pc.

25,70407802975/0.300 FLF 300/11,7 9x15

two drill holes


Weightper 100

115

kg

041602

EANcode

model no.

2980/2 BOB

length(A)

2000/78mm/Inch

m

1150418002980/6 BOB 6000/2341150426092980/2 SOS 2000/781150427082980/6 SOS 6000/2341230420052980/1 FOF 1000/391230421042980/2 FOF 2000/781230423022980/6 FOF 6000/234

115,35

042241

2980/2 E3E3

2000/78


Weightper 100

112

kg

042555

EANcode

model no.

2980/2 SLS

length(A)

2000/78mm/Inch

9,5x30

perforation

mm/Inch


mm/Inch

50

m

1200422032980/2 FLF 2000/78 9,5x30 50

112

C-rail 2986C-rail, slot width 18 mm, solid, according to DIN EN 60715 standard

Weightper 100

157

kg

043408

EANcode

model no.

2986/2 BOB

length(A)

2000/78mm/Inch

m

1570435072986/6 BOB 6000/2341570317022986/2 GOG 2000/781570318012986/4 GOG 4000/1561570440092986/2 SOS 2000/781571931412986/3 SOS 3000/1171570443062986/4 SOS 4000/1561570441082986/6 SOS 6000/2341680437052986/2 FOF 2000/781680438042986/6 FOF 6000/234

C-rail 2986C-rail, slot width 18 mm, perforated, according to DIN EN 60715 standard

Weightper 100

156

kg

193158

EANcode

model no.

2986/3 SLS

length(A)

3000/117mm/Inch

11,5x30

perforation

mm/Inch


mm/Inch

50

m

1560322592986/6 SLS 6000/234 11,5x30 5015,78731042986/100 FLF 100/3,9 11,5x30 5031,48731282986/200 FLF 200/7,8 11,5x30 5047,18731422986/300 FLF 300/11,7 11,5x30 5062,88731662986/400 FLF 400/15,6 11,5x30 5078,58731802986/500 FLF 500/19,5 11,5x30 5094,21931342986/600 FLF 600/23,4 11,5x30 501560437502986/2 FLF 2000/78 11,5x30 501561931652986/3 FLF 3000/117 11,5x30 501560322042986/6 FLF 6000/234 11,5x30 50156

342228

2986/3 E3LE3

3000/117 11,5x30

50

156

728923

2986/3 E5LE5

3000/117 11,5x30

50

1567289542986/6 E5LE5 6000/234 11,5x30 50

C-rail 2986C-rail, slot width 18 mm, solid, according to DIN EN 60715 standard, material thickness 1.75 mm

Weightper 100

139

kg

043958

EANcode

model no.

2986-1.75/2 SOS

length(A)

2000/78mm/Inch

thickness (t)

mm/Inch

1,75

m

SUPPORT SYSTEM

113

C-rail 2986C-rail, slot width 18 mm, solid, according to DIN EN 60715 standard, material thickness 1.75 mm

Weightper 100

139

kg

043965

EANcode

model no.

2986-1.75/2 SLS

length(A)

2000/78mm/Inch

11,5x30

perforation

mm/Inch


mm/Inch

50

thickness (t)

mm/Inch

1,75

m

1390439892986-1.75/6 SLS 6000/234 11,5x30 50 1,75


Weightper 100

265

kg

044504

EANcode

model no.

2988/2 BOB

length(A)

2000/78mm/Inch

m

2650446032988/6 BOB 6000/2342650323032988/2 GOG 2000/782650324022988/3 GOG 3000/1172650325012988/4 GOG 4000/1562850449002988/2 FOF 2000/782850450062988/6 FOF 6000/234

114


Weightper 100

259

kg

044955

EANcode

model no.

2988/2 FLF

length(A)

2000/78mm/Inch

11,5x30

perforation

mm/Inch


mm/Inch

50

m

2590450132988/6 FLF 6000/234 11,5x30 50


Weightper 100

1080

kg

893942

EANcode

model no.

2996/4.5 FLF

length(A)

4500/175,5mm/Inch

N

pc.

Splice Plateinside

Weightper 100

38

kg

898541

EANcode

model no.

SSV 4141 FF 2 FLM 12x30 F

acc. incl.

N

pc.

C-rail, type 2996To be used for:

SUPPORT SYSTEM

115

Connector BracketWeightper 100

33

kg

898589

EANcode

model no.

SAEI 80F 1 SKM 10x35 F, 1 VM 10 F

acc. incl.

N

pc.

C-rail, type 2996To be used for:


1,3

kg

926800

EANcode

model no.

SKC 88/96K03 yellow

color

N

pc.


protective end cap for rails, free of halogene and silicon

C-rail, type 2988... and 2996...To be used for: Brackets have to be installed at least 30 mm above hangers end to allow an easy mounting of theprotective end cap.

C-Profile type 2933solid DIN rail, width 35 mm, according to DIN EN 60715 standard

Weightper 100

35

kg

022700

EANcode

model no.

2933/2 BOB

length(A)

2000/78mm/Inch

m

350239292933/2 VOV 2000/78350233012933/2 GOG 2000/78350229082933/4 GOG 4000/156350245062933/2 SOS 2000/78350243082933/4 SOS 4000/15635

023042

2933/2 E3E3

2000/78

for quick mounting of terminal blocks and other devices

C-Profile type 2933perforated DIN rail, width 35 mm, according to DIN EN 60715 standard

Weightper 100

32

kg

023943

EANcode

model no.

2933/2 VLV

length(A)

2000/78mm/Inch

5,2x18

perforation

mm/Inch


mm/Inch

25

m

320240012933/2 GLG 2000/78 5,2x18 25320241002933/4 GLG 4000/156 5,2x18 25320248032933/2 SLS 2000/78 5,2x18 25320250082933/4 SLS 4000/156 5,2x18 25

for quick mounting of terminal blocks and other devices

U-shaped Slide NutSpecial version, cheese head bolts not included

Weightper 100

0,81

kg

116409

EANcode

model no.

GUE 404V M 4

thread

pc.

0,8116508GUE 405V M 5

insertable at any position of the rail

2970, 2971 and 2972 railTo be used for:

116

U-shaped Slide NutSpecial version, cheese head bolts not included

Weightper 100

1,43

kg

116607

EANcode

model no.

GUE 406G M 6

thread

pc.

1,35116706GUE 408G M 8



U-shaped Slide Nutwithout slotted cheese head bolt

Weightper 100

1,29

kg

115600

EANcode

model no.

GU 405G M 5

thread

pc.

1,28115709GU 406G M 6

insertable from the end of the rail

2975 and 2980 railTo be used for:

Sloped Sliding NutSpecial version, cheese head bolts not included

Weightper 100

1,88

kg

118656

EANcode

model no.

GSM 406 VV M 6

thread

height(H)

4/0,2mm/Inch

pc.

1,44118809GSM 410V M 10 6/0,21,88118601GSM 406G M 6 4/0,21,64118700GSM 408G M 8 6/0,21,88

119325

GSM 406 E3E3 M 6

4/0,2

1,33119349GSM 408 E3E3 M 8 4/0,21,44119363GSM 410 E3E3 M 10 4/0,21,88118557GSM 406 E5E5 M 6 4/0,2


2970, 2971, 2972, 2975 and 2980 railTo be used for:

Sloped Sliding NutSpecial version, cheese head bolts not included

Weightper 100

0,76

kg

119004

EANcode

model no.

GSM 0404G M 4

thread

pc.

0,76119103GSM 0405G M 50,97119202GSM 0406G M 60,92119301GSM 0408G M 8



Sloped Sliding Nutwith clamping spring (phosphated)

Weightper 100

0,86

kg

119400

EANcode

model no.

GSF 0404G M 4

thread

pc.

0,84119509GSF 0405G M 51,04119608GSF 0406G M 61,02119707GSF 0408G M 8

70



SUPPORT SYSTEM

117

Hammer Head Bolt, size M8nut and washer included

Weightper 100

3

kg

122806

EANcode

model no.

HM 408/20V

length(A)

20/0,8mm/Inch

pc.

3,5122905HM 408/30V 30/1,23,9123001HM 408/40V 40/1,64,3123100HM 408/50V 50/2



Hammer Head Bolt, size M10nut and washer included

Weightper 100

4,6

kg

123209

EANcode

model no.

HM 410/30V

length(A)

30/1,2mm/Inch

pc.

5,2123308HM 410/40V 40/1,65,8123407HM 410/50V 50/26,2123421HM 410/60V 60/2,37,2123483HM 410/90V 90/3,5



Hook Head Bolt, size M10nut and washer included

Weightper 100

3,8

kg

123704

EANcode

model no.

HK 510/20V

length(A)

20/0,8mm/Inch

4.6

strengthcategory

pc.

4,1123803HK 510/30V 30/1,2 4.64,9123902HK 510/40V 40/1,6 4.65,4124008HK 510/50V 50/2 4.64,1

123827

HK 510/30 E5E5

30/1,2 4.6

5,4124022HK 510/50 E5E5 50/2 4.6


2985, 2986, 2988 and 2990 rail2986 and 2988 rail

To be used for:


Weightper 100

5,3

kg

124107

EANcode

model no.

HK 512/20V

length(A)

20/0,8mm/Inch

4.6

strengthcategory

pc.

6124206HK 512/30V 30/1,2 4.66,7124305HK 512/50V 50/2 4.67,1124251HK 512/30 FF 30/1,2 4.68,4124350HK 512/50 FF 50/2 4.6


2985, 2986, 2988 and 2990 railTo be used for:


Weightper 100

6,7

kg

124909

EANcode

model no.

HK 612/30V

length(A)

30/1,2mm/Inch

4.6

strengthcategory

pc.

7,5125005HK 612/50V 50/2 4.612,4125050HK 612/80V 80/3,1 4.69,6124954HK 612/40 FF 40/1,6 4.6


C-Profiles type 2987, 2991, 2994 and 2995To be used for:

118

Beam ClampWeightper 100

15

kg

195800

EANcode

model no.

HSK 10F

height(H)

10/0,4mm/Inch

5 - 9


mm/Inch

pc.

18195909HSK 15F 15/0,6 10 - 1420196104HSK 20F 20/0,8 15 - 1924196203HSK 25F 25/1 20 - 2430196005HSK 30F 30/1,2 25 - 2936196302HSK 35F 35/1,4 30 - 3444196401HSK 40F 40/1,6 35 - 3915

768509

HSK 10 E3E3

10/0,4 5 - 9

18768608HSK 15 E3E3 15/0,6 10 - 1420768707HSK 20 E3E3 20/0,8 15 - 1924768806HSK 25 E3E3 25/1 20 - 2430768905HSK 30 E3E3 30/1,2 25 - 2936769001HSK 35 E3E3 35/1,4 30 - 3444769100HSK 40 E3E3 40/1,6 35 - 39

58

Beam Clampheavy-duty version

Weightper 100

21

kg

196425

EANcode

model no.

HSKS 10F

height(H)

10/0,4mm/Inch

5 - 9


mm/Inch

pc.

25196432HSKS 15F 15/0,6 10 - 1427196449HSKS 20F 20/0,8 15 - 1933196456HSKS 25F 25/1 20 - 2441196463HSKS 30F 30/1,2 25 - 2949196470HSKS 35F 35/1,4 30 - 3460196487HSKS 40F 40/1,6 35 - 39

58 68

Angle ClampWeightper 100

20

kg

196500

EANcode

model no.

HSW 10F

pc.

for clamping to profiles (width max. 10 mm)

Wall Supportsymmetric

Weightper 100

20

kg

194407

EANcode

model no.

WWU 150F 1 FLM 10x25 F

acc. incl.

pc.

for floor-, ceiling- or wall-mount

U-profile U 50/..., U 5050/ ..., U 6040/..., U 100/…To be used for:

SUPPORT SYSTEM

119

Wall Supportasymmetric

Weightper 100

30

kg

194759

EANcode

model no.

WWA 100F

thickness (t)

mm/Inch

5 1 FLM 10x25 F

acc. incl.

pc.

19,4

344345

WWA 100 E3E3

4 1 FLM 10x25 E3

for floor-, ceiling- or wall-mount

Stainless Steel U-Profile U 50/..., U 6040/..., U 100/... U-profile U 50/..., U 5050/ ..., U 6040/..., U 100/…

To be used for:

Angle JointWeightper 100

40,5

kg

891795

EANcode

model no.

TRV 40F

pc.

40,5

892150

TRV 40 E3E3

for connecting U-Profile or to use as a junction plate for overhead hangers

U 5050/..., U 6040/... and C-profilesTo be used for: please order mounting hardware based on application

Bracketadjustable from -30° to +30°

Weightper 100

48

kg

891801

EANcode

model no.

AWG 110/140F 2 FLM 10x25 F

acc. incl.

pc.

48

892167

AWG 110/140 E3E3 2 FLM 10x25 E3


U-Profile and RailsTo be used for: center distance of long holes 13x18 mm: 100 mm

Threaded Rod, size M 8Weightper 100

5

kg

201907

EANcode

model no.

M 8/100V M8

thread

length(A)

100/3,9mm/Inch

4.6

strengthcategory

4 SMU 8

acc. incl.

pc.

8202003M 8/200V M8 200/7,8 4.6 4 SMU 818202102M 8/500V M8 500/19,5 4.6 4 SMU 8

29,6203505M 8/1000V M8 1000/39 4.6 4 SMU 8


5

kg

202201

EANcode

model no.

M 10/90V M10

thread

length(A)

90/3,5mm/Inch

4.6

strengthcategory

4 SMU 10

acc. incl.

pc.

6202300M 10/130V M10 130/5,1 4.6 4 SMU 1015202409M 10/200V M10 200/7,8 4.6 4 SMU 1020202508M 10/300V M10 300/11,7 4.6 4 SMU 10

19,2202607M 10/400V M10 400/15,6 4.6 4 SMU 1024,2202706M 10/500V M10 500/19,5 4.6 4 SMU 1029,2202805M 10/600V M10 600/23,4 4.6 4 SMU 1033,8202904M 10/700V M10 700/27,3 4.6 4 SMU 1038,4203000M 10/800V M10 800/31,2 4.6 4 SMU 1043,2203109M 10/900V M10 900/35,1 4.6 4 SMU 1047203208M 10/1000V M10 1000/39 4.6 4 SMU 10

72,2203307M 10/1500V M10 1500/58,5 4.6 4 SMU 1065

769902

M 10/1000 E3E3 M10

1000/39 1.4301

4 SMU 10 E3

54 55 62

120

Threaded Rod, size M 10without nuts and washers

Weightper 100

105

kg

203406

EANcode

model no.

M 10/2000V M10

thread

length(A)

2000/78mm/Inch

4.6

strengthcategory

pc.

54 55 62

hexagonal nut and washers have to be ordered separately


24

kg

203512

EANcode

model no.

M 12/200V M12

thread

length(A)

200/7,8mm/Inch

4.6

strengthcategory

4 SMU 12

acc. incl.

pc.

31203529M 12/300V M12 300/11,7 4.6 4 SMU 1238203536M 12/400V M12 400/15,6 4.6 4 SMU 1246203543M 12/500V M12 500/19,5 4.6 4 SMU 1253203550M 12/600V M12 600/23,4 4.6 4 SMU 1267203574M 12/800V M12 800/31,2 4.6 4 SMU 1275345809M 12/1000V M12 1000/39 4.6 4 SMU 1275

841608

M 12/1000 E3E3 M12

1000/39 1.4301

4 SMU 12 E3

Hexagonal Nutwasher (acc. to DIN 125 standard) included

Weightper 100

0,1

kg

203604

EANcode

model no.

SMU 8V M8

thread

pc.

0,2203703SMU 10V M102344406SMU 12V M122

344260

SMU 10 E3E3 M10

3344284SMU 12 E3E3 M12

Bushinghexagonal

Weightper 100

1,8

kg

345588

EANcode

model no.

VBSM 8V M8

thread

length(A)

40/1,6mm/Inch

pc.

5345601VBSM 10V M10 40/1,67345700VBSM 12V M12 40/1,6

for connecting threaded rods

Serrated WasherDIN 6797, shape A

Weightper 100

0,9

kg

208302

EANcode

model no.

ZSM 4V

innerdiametre

mm/Inch

4,3

pc.

1,8208401ZSM 5V 5,32,3208500ZSM 6V 6,44208609ZSM 8V 8,48208708ZSM 10V 10,511208807ZSM 12V 12,5

SUPPORT SYSTEM

121

Hexagonal Boltnut and washer included

Weightper 100

1,6

kg

207107

EANcode

model no.

SKM 8 X 16V M8

thread

length(A)

16/0,6mm/Inch

8.8

strengthcategory

pc.

3,6207305SKM 10 X 25V M10 25/1 8.84,5207404SKM 10 X 40V M10 40/1,6 8.85207503SKM 10 X 50V M10 50/2 8.8

5,5207541SKM 10 X 70V M10 70/2,7 8.86207565SKM 12 X 70V M12 70/2,7 8.86886203SKM 10 X 80 FF M10 80/3,1 8.8

6,5893485SKM 10 X 90 FF M10 90/3,5 8.82

343959

SKM 8 X 40 E3E3 M8

40/1,6 1.4301

4,5344048SKM 10 X 40 E3E3 M10 40/1,6 1.43015,5344086SKM 10 X 70 E3E3 M10 70/2,7 1.43011,6729203SKM 8 X 16 E5E5 M8 16/0,6 1.45714729302SKM 10 X 25 E5E5 M10 25/1 1.4571

Property class is embossed to the head of the bolt.Check tightening torque for all kinds of crimp connections with a torque wrench:SKM 8..., tightening torque of 25 NmSKM 10..., tightening torque of 50 NmSKM 12..., tightening torque of 85 NmSKM 16..., tightening torque of 210 Nm

Mushroom Head Bolt, similar to DIN 603 StandardWeightper 100

0,8

kg

206209

EANcode

model no.

FLM 6 X 12V M6

thread

length(A)

12/0,5mm/Inch

-

strengthcategory

pc.

electroplated finish, with serrated flange nut


0,8

kg

206407

EANcode

model no.

FLM 6 X 12 FF M6

thread

length(A)

12/0,5mm/Inch

-

strengthcategory

pc.

0,9206506FLM 6 X 16 FF M6 16/0,6 -2206605FLM 8 X 13 FF M8 13/0,5 8.8

2,2206704FLM 8 X 16 FF M8 16/0,6 8.82,8206803FLM 8 X 25 FF M8 25/1 8.84206902FLM 10 X 25 FF M10 25/1 8.88207008FLM 12 X 30 FF M12 30/1,2 8.8

HDG finish, flange nut included


0,8

kg

343805

EANcode

model no.

FLM 6 X 12 E3E3 M6

thread

length(A)

12/0,5mm/Inch

1.4301

strengthcategory

pc.

1,9343843FLM 8 X 16 E3E3 M8 16/0,6 1.43014343881FLM 10 X 25 E3E3 M10 25/1 1.4301

0,8729104FLM 6 X 12 E5E5 M6 12/0,5 1.4571

stainless steel finish, washer and hexagonal nut included


1,56

kg

207060

EANcode

model no.

FLDM 6X45V M6

thread

length(A)

45/1,8mm/Inch

N

pc.

for attaching cable trays on perforated C-rail

electroplated finish, washer and flange nut included

122


1,56

kg

343829

EANcode

model no.

FLDM 6X45 E3E3 M6

thread

length(A)

45/1,8mm/Inch

N

pc.

for attaching cable trays on perforated C-rail

stainless steel finish, washer and hexagonal nut included

Large Diameter WasherWeightper 100

0,3

kg

208906

EANcode

model no.

UGM 6V 6,4

Diameter ofmounting hole

mm/Inch

widthB

18/0,7mm/Inch

pc.

0,7209002UGM 8V 8,4 25/11,2209101UGM 10V 10,5 30/1,20,3

927258

UGM 6 E3E3 6,4

18/0,7

for attaching cable ladders to brackets or cable trays on perforated C-rail

Beam ClampWeightper 100

5

kg

196548

EANcode

model no.

PKL 6-20S

pc.

Length L in mm

Load

F in

N

for clamping 2970 rails to steel beams

carrier section flange width 6-20 mmTo be used for:

Load Chart: Clamping Kit (2x Profile Clamp PKL + 2970 C-Profile)

Sloped Sliding Nutwith clamping spring (phosphated)

Weightper 100

1,04

kg

119608

EANcode

model no.

GSF 0406G M 6

thread

pc.

70



Slotted Pan Head BoltWeightper 100

1,89

kg

207053

EANcode

model no.

FK 6 X 12V M6

thread

pc.

for mounting of ventilated cable tray on 2970 type C-rail using sloped sliding nuts GSF 0406

SUPPORT SYSTEM

123

Hanger for Ceiling SuspensionWeightper 100

9

kg

197200

EANcode

model no.

DBT 40S M 10

for threaded rod

pc.

9197255DBT 40 FF M 109

769841

DBT 40 E3E3 M 10

54 62

for mounting on corrugated sheet metal ceilings

Threaded Rod Suspension, size M 10To be used for:

Hanger for Ceiling Suspensionfor bolting

Weightper 100

12

kg

200504

EANcode

model no.

DB 10S M 10

for threaded rod

pc.

12200559DB 10 FF M 1020

769803

DB 10 E3E3 M 10

62



Hanger for Ceiling Suspensionwith hinge

Weightper 100

16

kg

200603

EANcode

model no.

DBG 10S M 10

for threaded rod

pc.

62



Hanger for Ceiling Suspensionwith hinge

Weightper 100

43,3

kg

345502

EANcode

model no.

DBG 12F M 12

for threaded rod

pc.

45

769827

DBG 12 E3E3 M 12



Anchor PlateWeightper 100

10

kg

209200

EANcode

model no.

VP 50.50F

height(H)

50/2mm/Inch

widthB

50/2mm/Inch

pc.

for fixing the bracket on gas concrete and/or construction materials with poor solidity.

124

Snap-in Bracketfor clip on ...

Weightper 100

2

kg

197279

EANcode

model no.

REBA 50V

widthB

50/2mm/Inch

thickness (t)

mm/Inch

4 0,15

admissibleload F

kN

pc.

3197286REBA 60V 60/2,3 4 0,155197293REBA 100V 100/3,9 4 0,152

911950

REBA 50 E3E3

50/2

4 0,15

3911967REBA 60 E3E3 60/2,3 4 0,155911974REBA 100 E3E3 100/3,9 4 0,15

62

cable trays RL 35..., RL 50..., RL 60..., RLC 60..., distribution cable trays RSV 50…To be used for: Centric hanging by means of gripple set hooks, ropes or coil chainsThe load rating shown is valid only for proper anchorage to the building structure.

Hanging Framefor clip on ...

Weightper 100

6

kg

197309

EANcode

model no.

RCB 50S

widthB

50/2mm/Inch

pc.

7197354RCB 70S 70/2,79197408RCB 75S 75/2,912197507RCB 100S 100/3,914197552RCB 120S 120/4,717197606RCB 150S 150/5,822197705RCB 200S 200/7,827197804RCB 250S 250/9,832197903RCB 300S 300/11,7

62

cable trays RL..., RLV..., RS...,RLC... as well as the distribution tray RSV 50...To be used for: Centric hanging of the cable tray by means of threaded rod and eye bolt, size M10, plus coil chain or rope.

Snap-in Bracketfor swivel in

Weightper 100

7

kg

911905

EANcode

model no.

REBI 60.100V

widthB

100/3,9mm/Inch

thickness (t)

mm/Inch

5 M 10

for threaded rod

0,2

admissibleload F

kN

pc.

11911929REBI 60.200V 200/7,8 6 M 10 0,218911943REBI 60.300V 300/11,7 7 M 10 0,2

54

cable trays RL 60..., RS 60..., RLV 60... and RLC 60...To be used for: Centric hanging of the cable tray/distribution cable tray by means of threaded rod and eye bolt, size M10,plus coil chain or rope.The load rating shown is valid only for proper anchorage to the building structure.

SUPPORT SYSTEM

125

Hanging Framefor inserting

Weightper 100

8

kg

198009

EANcode

model no.

RTU 35.050S

height(H)

29/1,1mm/Inch

widthB

47/1,8mm/Inch

pc.

11198306RTU 35.100S 29/1,1 97/3,820198405RTU 35.150S 29/1,1 147/5,724198504RTU 35.200S 29/1,1 197/7,734198603RTU 35.250S 29/1,1 247/9,643198702RTU 35.300S 29/1,1 297/11,610198108RTU 50.050S 44/1,7 47/1,812198207RTU 50.075S 44/1,7 72/2,817198757RTU 60.070S 54/2,1 67/2,615198801RTU 60.100S 54/2,1 97/3,822198856RTU 60.120S 54/2,1 117/4,624198900RTU 60.150S 54/2,1 147/5,728199006RTU 60.200S 54/2,1 197/7,743199105RTU 60.250S 54/2,1 247/9,650199204RTU 60.300S 54/2,1 297/11,620535125RTU 60.100 FF 54/2,1 97/3,828535149RTU 60.200 FF 54/2,1 197/7,750535163RTU 60.300 FF 54/2,1 297/11,6

58

mini cable trays RL 35.050 - RL 50.075, cable trays RL 35..., RL 60..., RLV 60..., RLC 60...and RS 60...,

To be used for:

Centric hanging of the cable tray/distribution cable tray by means of threaded rod and eye bolt, size M10,plus coil chain or rope.


10,5

kg

204205

EANcode

model no.

TW 100S

widthB

98/3,8mm/Inch

2 FLM 6x12

acc. incl.

pc.

14,5204304TW 150S 148/5,8 2 FLM 6x1218,5204403TW 200S 190/7,4 2 FLM 6x1223204502TW 250S 240/9,4 2 FLM 6x12

27,5204601TW 300S 290/11,3 2 FLM 6x1244,5204700TW 400S 450/17,6 2 FLM 6x1239204809TW 500S 550/21,4 2 FLM 6x1262204908TW 600S 650/25,4 2 FLM 6x124204915TW 100 FF 98/3,8 2 FLM 6x12 F8204939TW 200 FF 190/7,4 2 FLM 6x12 F19204953TW 300 FF 290/11,3 2 FLM 6x12 F32204960TW 400 FF 450/17,6 2 FLM 6x12 F39204977TW 500 FF 550/21,4 2 FLM 6x12 F44204984TW 600 FF 650/25,4 2 FLM 6x12 F4

769209

TW 100 E3E3

98/3,8 2 FLM 6x12 E3

8769308TW 200 E3E3 190/7,4 2 FLM 6x12 E319769407TW 300 E3E3 290/11,3 2 FLM 6x12 E332769506TW 400 E3E3 450/17,6 2 FLM 6x12 E339769605TW 500 E3E3 550/21,4 2 FLM 6x12 E344769704TW 600 E3E3 650/25,4 2 FLM 6x12 E3

55

cable trays RL..., RLV..., RS..., distribution tray RSV... and wire mesh trays GR..., GRS...,GRC...

To be used for:

126

Mounting DeviceWeightper 100

5,8

kg

287901

EANcode

model no.

KLA 6S 1 FLM 6x12

acc. incl.

pc.

for attaching rising or falling straight sections of cable trays or ladders to support brackets. Hold downclamp has to be bent according to the gradient of the tray.

Zinc Spray (400 ml)Weightper 100

50

kg

206056

EANcode

model no.

ZKS

pc.

Zincspray according to DIN EN ISO 1461

for subsequent repair of zinc coating, use in dry indoor environment only

Zinc Powder Paint (1.000 ml)Weightper 100

170

kg

205905

EANcode

model no.

ZKF 1

pc.

use ZKV 1 thinner only

DIN EN ISO 1461 compliant

Thinner (1.000 ml)Weightper 100

110

kg

206001

EANcode

model no.

ZKV 1

pc.

zinc powder paint ZKF 1To be used for:

Edge Protection Stripwith steel or stainless steel insert

Weightper 100

14,5

kg

206100

EANcode

model no.

RKBA 10K10 black

color

m

145729050RKBA 10 E5K10 black

To prevent accidents and injuries you must install edge protection strip!temperature range -25°C to +70°C

for protecting cut edges with a material thickness from 0,75 mm up to 4 mm

SUPPORT SYSTEM

127

Ro-ClipWeightper 100

1,14

kg

005307

EANcode

model no.

B 491K02 7 - 25

for Ø

mm/Inch

grey

color

pc.

1,38005406B 493K02 13 - 38 grey

Bolts and sliding nuts are pregalv.C-rail (16-17 mm slot width)To be used for:

128

Yoke-Clampwith pressure cradle

Weightper 100

2,7

kg

047406

EANcode

model no.

B 12F 6 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

2,8047505B 14F 10 - 14 slotted screw M 63,2047604B 16F 12 - 16 slotted screw M 6

047703B 18F 14 - 18 slotted screw M 63,6047802B 22F 18 - 22 slotted screw M 63,7047901B 26F 22 - 26 slotted screw M 64,5048007B 30F 26 - 30 slotted screw M 65,6048106B 34F 30 - 34 slotted screw M 68048205B 38F 34 - 38 slotted screw M 6

8,5048304B 42F 38 - 42 slotted screw M 69,65048403B 46F 42 - 46 slotted screw M 810,4048502B 50F 46 - 50 slotted screw M 811048601B 54F 50 - 54 slotted screw M 8

11,8048700B 58F 54 - 58 slotted screw M 812,75048809B 64F 58 - 64 slotted screw M 8

17048908B 70F 64 - 70 slotted screw M 818,4049004B 76F 70 - 76 slotted screw M 820,05049103B 82F 76 - 82 slotted screw M 822,4049202B 90F 82 - 90 slotted screw M 823,7049301B 100F 90 - 100 slotted screw M 826,4049400B 110F 100 - 110 slotted screw M 82,2

081905

B 14 E3E3 10 - 14

slotted screw

M 6

2,5082001B 18 E3E3 14 - 18 slotted screw M 62,8082100B 22 E3E3 18 - 22 slotted screw M 63,7082209B 26 E3E3 22 - 26 slotted screw M 64,5082308B 30 E3E3 26 - 30 slotted screw M 65,6082407B 34 E3E3 30 - 34 slotted screw M 66,4082506B 38 E3E3 34 - 38 slotted screw M 68,5082605B 42 E3E3 38 - 42 slotted screw M 69,65082704B 46 E3E3 42 - 46 slotted screw M 810,4082803B 50 E3E3 46 - 50 slotted screw M 811082902B 54 E3E3 50 - 54 slotted screw M 8

11,8083008B 58 E3E3 54 - 58 slotted screw M 812,75083107B 64 E3E3 58 - 64 slotted screw M 8

17083206B 70 E3E3 64 - 70 slotted screw M 818,4083305B 76 E3E3 70 - 76 slotted screw M 81,2

069002

B 14 ALAL 10 - 14

DIN 84

M 6

1,4069101B 18 ALAL 14 - 18 DIN 84 M 61,6069200B 22 ALAL 18 - 22 DIN 84 M 82,1069309B 26 ALAL 22 - 26 DIN 84 M 81,5069408B 30 ALAL 26 - 30 DIN 84 M 82,8069507B 34 ALAL 30 - 34 DIN 84 M 83069606B 38 ALAL 34 - 38 DIN 84 M 8

3,2069705B 42 ALAL 38 - 42 DIN 84 M 83,6069804B 46 ALAL 42 - 46 DIN 84 M 83,8069903B 50 ALAL 46 - 50 DIN 84 M 84,2070008B 54 ALAL 50 - 54 DIN 84 M 83,8070107B 58 ALAL 54 - 58 DIN 84 M 84,3070206B 64 ALAL 58 - 64 DIN 84 M 8

If ordered in HDG (F) steel pressure cradle is pregalv.E3 type: Yoke clamp and pressure cradle are made from stainless steel.AL type: Yoke clamp and pressure cradle are made from aluminum.

for one cable

C-rail, slot width 16-17 mmTo be used for: counter pressure cradle (GWU/GWS) must be ordered separately

SUPPORT SYSTEM

129


Weightper 100

2,75

kg

049509

EANcode

model no.

B 12/2F 10 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

3,9049608B 14/2F 12 - 14 slotted screw M 64,4049707B 16/2F 14 - 16 slotted screw M 64,7049806B 18/2F 16 - 18 slotted screw M 65,3049905B 22/2F 18 - 22 slotted screw M 65,7050000B 26/2F 22 - 26 slotted screw M 66,7050109B 30/2F 26 - 30 slotted screw M 68,1050208B 34/2F 30 - 34 slotted screw M 6

11,75050307B 38/2F 34 - 38 slotted screw M 612,75050406B 42/2F 38 - 42 slotted screw M 614,05050505B 46/2F 42 - 46 slotted screw M 8

15050604B 50/2F 46 - 50 slotted screw M 83,1

083404

B 14/2 E3E3 12 - 14

slotted screw

M 6

3,67083503B 18/2 E3E3 16 - 18 slotted screw M 64,41083602B 22/2 E3E3 20 - 22 slotted screw M 65,69083701B 26/2 E3E3 24 - 26 slotted screw M 66,51083800B 30/2 E3E3 28 - 30 slotted screw M 68,09083909B 34/2 E3E3 32 - 34 slotted screw M 611,97084005B 38/2 E3E3 36 - 38 slotted screw M 613,16084104B 42/2 E3E3 40 - 42 slotted screw M 613,8084203B 46/2 E3E3 44 - 46 slotted screw M 814,85084302B 50/2 E3E3 48 - 50 slotted screw M 81,65

070305

B 14/2 ALAL 12 - 14

DIN 84

M 6

2070404B 16/2 ALAL 14 - 16 DIN 84 M 62,3070503B 18/2 ALAL 14 - 18 DIN 84 M 62,9070602B 22/2 ALAL 18 - 22 DIN 84 M 63,05070701B 26/2 ALAL 22 - 26 DIN 84 M 83,9070800B 30/2 ALAL 26 - 30 DIN 84 M 84,2070909B 34/2 ALAL 30 - 34 DIN 84 M 84,7071005B 38/2 ALAL 34 - 38 DIN 84 M 85,1071104B 42/2 ALAL 38 - 42 DIN 84 M 85,6071203B 46/2 ALAL 42 - 46 DIN 84 M 85,6071302B 50/2 ALAL 46 - 50 DIN 84 M 8

If ordered in HDG (F) steel pressure cradle is pregalv.E3 type: Yoke clamp and pressure cradle are made from stainless steel.AL type: Yoke clamp and pressure cradle are made from aluminum.

for two cables

C-rail, slot width 16-17 mmTo be used for: Single (GWU/GWS) and double-sided (DW) bottom saddles must be ordered separately

130


Weightper 100

4,2

kg

050703

EANcode

model no.

B 12/3F 9 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

5050802B 14/3F 12 - 14 slotted screw M 65,2050901B 16/3F 14 - 16 slotted screw M 65,7051007B 18/3F 16 - 18 slotted screw M 66,3051106B 20/3F 18 - 20 slotted screw M 66,9051205B 22/3F 20 - 22 slotted screw M 67,1051304B 24/3F 22 - 24 slotted screw M 67,7051403B 26/3F 24 - 26 slotted screw M 68,15051502B 28/3F 26 - 28 slotted screw M 68,9051601B 30/3F 28 - 30 slotted screw M 6

If ordered in HDG (F) steel pressure cradle is pregalv.

for three cables

C-rail, slot width 16-17 mmTo be used for: Single (GWU/GWS) and double-sided (DW) bottom saddles must be ordered separately

SUPPORT SYSTEM

131


Weightper 100

1,95

kg

064601

EANcode

model no.

BU 12F 6 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

3,2064700BU 14F 10 - 14 slotted screw M 63,4064908BU 16F 12 - 16 slotted screw M 6

065004BU 18F 14 - 18 slotted screw M 64,1065103BU 22F 18 - 22 slotted screw M 64,4065202BU 26F 22 - 26 slotted screw M 64,5065301BU 30F 26 - 30 slotted screw M 65,6065400BU 34F 30 - 34 slotted screw M 68,2065509BU 38F 34 - 38 slotted screw M 68,5065608BU 42F 38 - 42 slotted screw M 69,65065707BU 46F 42 - 46 slotted screw M 810,4065806BU 50F 46 - 50 slotted screw M 811065905BU 54F 50 - 54 slotted screw M 8

11,8066001BU 58F 54 - 58 slotted screw M 812,75066100BU 64F 58 - 64 slotted screw M 8

17066209BU 70F 64 - 70 slotted screw M 818,4066308BU 76F 70 - 76 slotted screw M 820,05066407BU 82F 76 - 82 slotted screw M 822,4066506BU 90F 82 - 90 slotted screw M 823,7066605BU 100F 90 - 100 slotted screw M 8

066704BU 110F 100 - 110 slotted screw M 82,4

757701

BU 12 E3E3 6 - 12

slotted screw

M 6

2,7757800BU 14 E3E3 10 - 14 slotted screw M 62,9757909BU 18 E3E3 14 - 18 slotted screw M 63,3758005BU 22 E3E3 18 - 22 slotted screw M 64,15758104BU 26 E3E3 22 - 26 slotted screw M 6

758203BU 30 E3E3 26 - 30 slotted screw M 65,55758302BU 34 E3E3 30 - 34 slotted screw M 66,1758401BU 38 E3E3 34 - 38 slotted screw M 66,75758500BU 42 E3E3 38 - 42 slotted screw M 69,4758609BU 46 E3E3 42 - 46 slotted screw M 89,9758708BU 50 E3E3 46 - 50 slotted screw M 811758807BU 54 E3E3 50 - 54 slotted screw M 8

12,1758906BU 58 E3E3 54 - 58 slotted screw M 82,4

890507

BU 12 E5E5 6 - 12

slotted screw

M 6

2,7890101BU 14 E5E5 10 - 14 slotted screw M 62,9890149BU 18 E5E5 14 - 18 slotted screw M 63,3890163BU 22 E5E5 18 - 22 slotted screw M 64,15890187BU 26 E5E5 22 - 26 slotted screw M 64,55890200BU 30 E5E5 26 - 30 slotted screw M 61,4

075409

BU 14 ALAL 10 - 14

DIN 84

M 6

1,6075508BU 18 ALAL 14 - 18 DIN 84 M 61,7075607BU 22 ALAL 18 - 22 DIN 84 M 62,1075706BU 26 ALAL 22 - 26 DIN 84 M 61,6075805BU 30 ALAL 26 - 30 DIN 84 M 82,5075904BU 34 ALAL 30 - 34 DIN 84 M 82,7076000BU 38 ALAL 34 - 38 DIN 84 M 82,9076109BU 42 ALAL 38 - 42 DIN 84 M 83,15076208BU 46 ALAL 42 - 46 DIN 84 M 83,35076307BU 50 ALAL 46 - 50 DIN 84 M 83,65076406BU 54 ALAL 50 - 54 DIN 84 M 83,9076505BU 58 ALAL 54 - 58 DIN 84 M 84,3076604BU 64 ALAL 58 - 64 DIN 84 M 8

If ordered in HDG (F) steel pressure cradle is pregalv.E3 type: Yoke clamp and pressure cradle are made from stainless steel.E5 type: Yoke clamp and pressure cradle are made from stainless steel.AL type: Yoke clamp and pressure cradle are made from aluminum.

for one cable

C-rail (18-22 mm slot width)To be used for: counter pressure cradle (GWU/GWS) must be ordered separately

132


Weightper 100

3,25

kg

066803

EANcode

model no.

BU 12/2F 10 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

4,3066902BU 14/2F 12 - 14 slotted screw M 64,6067008BU 16/2F 14 - 16 slotted screw M 64067107BU 18/2F 16 - 18 slotted screw M 6

5,6067206BU 22/2F 18 - 22 slotted screw M 66,1067305BU 26/2F 22 - 26 slotted screw M 66,75067404BU 30/2F 26 - 30 slotted screw M 68,15067503BU 34/2F 30 - 34 slotted screw M 612,05067602BU 38/2F 34 - 38 slotted screw M 612,9067701BU 42/2F 38 - 42 slotted screw M 613,95067800BU 46/2F 42 - 46 slotted screw M 814,9067909BU 50/2F 46 - 50 slotted screw M 83,15

759002

BU 12/2 E3E3 6 - 12

slotted screw

M 6

3,5759101BU 14/2 E3E3 12 - 14 slotted screw M 63,75759156BU 16/2 E3E3 14 - 16 slotted screw M 63,9759200BU 18/2 E3E3 16 - 18 slotted screw M 64,55759309BU 22/2 E3E3 20 - 22 slotted screw M 65,9759408BU 26/2 E3E3 24 - 26 slotted screw M 66,6759507BU 30/2 E3E3 28 - 30 slotted screw M 67,95759606BU 34/2 E3E3 32 - 34 slotted screw M 69,1759705BU 38/2 E3E3 36 - 38 slotted screw M 6

12,55759804BU 42/2 E3E3 40 - 42 slotted screw M 613,65759903BU 46/2 E3E3 44 - 46 slotted screw M 814,2760008BU 50/2 E3E3 48 - 50 slotted screw M 8

If ordered in HDG (F) steel pressure cradle is pregalv.E3 type: Yoke clamp and pressure cradle are made from stainless steel.

for two cables

C-rail (18-22 mm slot width)To be used for: Single (GWU/GWS) and double-sided (DW) bottom saddles must be ordered separately

SUPPORT SYSTEM

133


Weightper 100

4,8

kg

068005

EANcode

model no.

BU 12/3F 10 - 12

for cable Ø

mm/Inch

slotted screw

bolt head

M 6

thread

pc.

5,3068104BU 14/3F 12 - 14 slotted screw M 6068203BU 16/3F 14 - 16 slotted screw M 6

6,2068302BU 18/3F 16 - 18 slotted screw M 66,5068401BU 20/3F 18 - 20 slotted screw M 67,3068500BU 22/3F 20 - 22 slotted screw M 67,5068609BU 24/3F 22 - 24 slotted screw M 67,8068708BU 26/3F 24 - 26 slotted screw M 68,3068807BU 28/3F 26 - 28 slotted screw M 68,75068906BU 30/3F 28 - 30 slotted screw M 6

If ordered in HDG (F) steel pressure cradle is pregalv.

for three cables

C-rail (18-22 mm slot width)To be used for: Single (GWU/GWS) and double-sided (DW) bottom saddles must be ordered separately

Counter Pressure Cradle for all Yoke-ClampsWeightper 100

0,09

kg

109609

EANcode

model no.

GWU 12K02 6 - 12

for cable Ø

mm/Inch

length(A)

40/1,6mm/Inch

pc.

0,1109708GWU 14K02 10 - 14 40/1,60,13110001GWU 16K02 12 - 16 40/1,60,14110100GWU 18K02 14 - 18 40/1,60,25110209GWU 22K02 18 - 22 40/1,60,3110308GWU 26K02 22 - 26 40/1,60,45110407GWU 30K02 26 - 30 40/1,60,5110506GWU 34K02 30 - 34 40/1,60,56110605GWU 38K02 34 - 38 40/1,60,62110704GWU 42K02 38 - 42 40/1,60,68110803GWU 46K02 42 - 46 40/1,60,75110902GWU 50K02 46 - 50 40/1,61,3111008GWU 54K02 50 - 54 45/1,81,45111107GWU 58K02 54 - 58 45/1,81,6111206GWU 64K02 58 - 64 45/1,81,83111305GWU 70K02 64 - 70 45/1,8

2111404GWU 76K02 70 - 76 45/1,82,2111503GWU 82K02 76 - 82 45/1,82,4111602GWU 90K02 82 - 90 45/1,82,8111701GWU 100K02 90 - 100 45/1,83,2111800GWU 110K02 100 - 110 45/1,8

for insertion into the Yoke-Clamp

134

Bundle-ClampWeightper 100

14,5

kg

099405

EANcode

model no.

BUE 50/40.25F 20 - 40

span width

mm/Inch

inside dimension (B)

mm/Inch

50

pc.

27,5099801BUE 100/40.25F 25 - 40 10028099900BUE 100/40.40F 10 - 40 10032100309BUE 100/80.25F 65 - 80 100

14,5

101108

BUE50/40.25 E3E3 20 - 40

50

27,5101207BUE100/40.25E3E3 25 - 40 10028101306BUE100/40.40E3E3 10 - 40 10032100002BUE100/80.25E3E3 65 - 80 100

for mounting to the profile

Slot width 16 - 17 mmTo be used for: Please order nut separately if used in conjunction with C-railOne M8x12 bolt and a GSM 408 sliding nut are included.

Triangle-shaped Yoke-Clamp for three cablesWeightper 100

1,1

kg

099108

EANcode

model no.

BUD 30F 28 - 32

for cable Ø

mm/Inch

pc.

10,95099207BUD 36F 32 - 3611,95099306BUD 44F 36 - 44

Bottom saddle and pressure craddles are made from halogen free polypropylene.

for three cables

Slot width 18 - 22 mmTo be used for:

SUPPORT SYSTEM

135

Documents

CABLE TRAY SYSTEM - Niedax Asia Pacificniedax.com.sg/pdfs/Niedax-KR-2009-usa_Support_System.pdf · 2012-06-14 · 79 Protective Cap Weight per 100 2 kg 348053 EAN code model no. K10