Upload
scrbdgharavi
View
215
Download
0
Embed Size (px)
Citation preview
7/28/2019 CasingCementingModuleSubsea.xls
1/7
CASING and CEMENTING Module for Subsea
Lease and Block: Well Name & No:
OCS-G-Number: Permit MD: KOP: Rig Elevation:
Prepared By: Permit TVD: Date:
VENDORS:
Casing Crews & Service: Frank's Casing Crews
Cement & Cement Service: Halliburton
Cement Accessories: Gemoco, Centralizers. Davis Lynch, Float Equipment
Liner Equipment & Service:
Logging Services:
Other Related Services:
Subsea Wellheads & Service:
DEPTH CASING POINTS:
Drive Pipe: 357' 1st Drilling Liner: NoneConductor: None 2nd Drilling Liner: None
Surface: 3,400' Production Liner: None1st Intermediate: 9,748' Production Tie-back String: None
2nd Intermediate: None Production Long String: 11,712'
1. DRIVE PIPE . . . .
OD Drive Pipe: 36" Wall Thickness: 1.00" Slot: None Air Gap: 80' Pipe ID: 34.0"
Penetration BML: 350' Pre Driven: No Water Depth: 1696' Setting Depth: 2126'
2. CONDUCTOR CASING . . . .
Hole Size: 28.000" Casing OD: 24.000" Drift Diameter: 22.250"
Setting Depth, MD: 2,600' Setting Depth, TVD: 2,600' Clearance: 1.500"
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn. Grade Weight Weight Tension Collapse Top Burst Btm Burst
1,696 2,600 904 156.00 S-60 X-56 141,024 141,024 17.78 0.95 2.24 2.39
Design Conditions -
Backup Gradient: 8.942 , ppg Mud Weight: 9.0 , ppg Gas Gradient: 0.100
Fracture Gradient: 10.2 , ppg MASP, psi: 1292
Cement Design -
% Excess OH: 100 Sacks of Lead: 420 Sacks of Tail: 752
Cement Top: 1,696' Slurry Wt. Lead: 10.8 Slurry Wt. Tail: 15.6
Thickening Time: 5.0 hr Yield, ft/sx Lead: 4.18 Yield,, ft/sx Tail: 1.21
Placement Time: 3.0 hr Volume, ft Lead: 1,755 Volume, ft Tail: 681
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Page 1
7/28/2019 CasingCementingModuleSubsea.xls
2/7
3. SURFACE CASING . . . .
Hole Size: 26.000" Casing OD: 20.000" Drift Diameter: 18.542"
Setting Depth, MD: 4,200' Setting Depth, TVD: 4,200' Clearance: 2.500"
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
1696 4,200 2,504 133.00 S-60 HCN80 333,032 333,032 10.20 1.42 1.84 2.11
Design Conditions -
Backup Gradient: 8.942 , ppg Mud Weight: 10.0 , ppg Gas Gradient: 0.100Fracture Gradient: 12.2 , ppg MASP, psi: 2,412
Cement Design -
% Excess OH: 100 Sacks of Lead: 2,055 Sacks of Tail: 1387
Cement Top: 1696' Slurry Wt. Lead: 12.0 Slurry Wt. Tail: 15.6
Thickening Time: 5.0 hr Yield, ft/sx Lead: 1.84 Yield, ft/sx Tail: 1.2
Placement Time: 3.5 hr Volume, ft Lead: 3,780 Volume, ft Tail: 1,665
Type Lead Cement:
Type Tail Cement:
Well Head:
Accessories:
4. INTERMEDIATE CASING - 1 . . . .
Hole Size: 17.500" Casing OD: 13.375" Drift Diameter: 12.347"
Setting Depth, MD: 6,600' Setting Depth, TVD: 6,600' Clearance: 1.563"
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
1,696 6,600 4,904 72.00 BUTT HCN80 353,088 353,088 5.76 1.00 2.43 1.64
Design Conditions - Fracture Gradient: 15.0
Backup Gradient: 8.942 , ppg Completion Fluid Wt: 12.0 , ppg Mud Weight: 12.0Pore PSI For MASP: 11.8 , ppg TVD For MASP: 10,830' MASP, psi: 2,212
Cement Design -
% Excess OH: 25 Sacks of Lead: 1,301 Sacks of Tail: 878
Cement Top MD: 3,700' Slurry Wt. Lead: 12.7 Slurry Wt. Tail: 16.4
Thickening Time: 6.0 hr Yield, ft/sx Lead: 1.28 Yield, ft/sx Tail: 1.07
Placement Time: 3.0 hr Volume, ft Lead: 1,665 Volume, ft Tail: 939
Spacer:
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Page 2
7/28/2019 CasingCementingModuleSubsea.xls
3/7
5. INTERMEDIATE CASING - 2 . . . .
Hole Size: Casing OD: Drift Diameter:
Setting Depth, MD: Setting Depth, TVD: Clearance:
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
Design Conditions - Fracture Gradient:
Backup Gradient: , ppg Completion Fluid Wt: , ppg Mud Weight:Pore PSI For MASP: , ppg TVD For MASP: MASP, psi:
Cement Design -
% Excess OH: Sacks of Lead: Sacks of Tail:
Cement Top MD: Slurry Wt. Lead: Slurry Wt. Tail:
Thickening Time: Yield, ft/sx Lead: Yield, ft/sx Tail:
Placement Time: Volume, ft Lead: Volume, ft Tail:
Spacer:
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Page 3
7/28/2019 CasingCementingModuleSubsea.xls
4/7
7/28/2019 CasingCementingModuleSubsea.xls
5/7
6. PRODUCTION LINER . . . .
Hole Size: 8.500" Casing OD: 7.000" Drift Diameter: 6.184"
Setting Depth, MD: 11,712' Setting Depth, TVD: 10,830' Clearance: 0.750"
Top of Liner, MD: 9,246' Top of Liner, TVD: 8,695'
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
9,246 11,712 2,466 29.00 SHJF P-110 71,514 71,514 10.17 1.14 1.38 1.31
Design Conditions -Backup Gradient: 10.0 , ppg Completion Fluid Wt.: 13.2 , ppg Mud Weight: 13.2
Pore PSI For MASP: 11.8 , ppg TVD For MASP: 10,830' MASP, psi: 5,452
Cement Design -
% Excess OH: 50 Sacks of Lead: 470 Sacks of Tail: None
Cement Top: 9,246' Slurry Wt. Lead: 16 Slurry Wt. Tail:
Thickening Time: 5.0 hr Yield, ft/sx Lead: 1.14 Yield, ft/sx Tail:
Placement Time: 3.0 hr Volume, ft Lead: 536 Volume, ft Tail:
Spacer:
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Liner Equipment:
Page 5
7/28/2019 CasingCementingModuleSubsea.xls
6/7
PRODUCTION CASING LINER 1
Hole Size: 8.500" Casing OD: 7.000" Drift Diameter: 6.184"
Setting Depth, MD: 11,712' Setting Depth, TVD: 10,830' Clearance: 0.750"
Top of Liner, MD: 9,246' Top of Liner, TVD: 8,695'
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
9,246 11,712 2,466 29.00 71514.00 P-110 71,514 71,514 10.17 1.14 1.39 1.32
Design Conditions -Backup Gradient: 10.0 , ppg Completion Fluid Wt.: 13.2 , ppg Mud Weight: 13.2
Pore PSI For MASP: 11.8 , ppg TVD For MASP: 10,830' MASP, psi: 5,375
Cement Design -
% Excess OH: 50 Sacks of Lead: 470 Sacks of Tail: None
Cement Top: 9,246' Slurry Wt. Lead: 16 Slurry Wt. Tail:
Thickening Time: 5.0 hr Yield, ft/sx Lead: 1.14 Yield, ft/sx Tail:
Placement Time: 3.0 hr Volume, ft Lead: 536 Volume, ft Tail:
Spacer:
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Liner Equipment:
Page 6
7/28/2019 CasingCementingModuleSubsea.xls
7/7
DRILLING CASING LINER 2
Hole Size: 8.500" Casing OD: 7.000" Drift Diameter: 6.184"
Setting Depth, MD: 11,712' Setting Depth, TVD: 10,830' Clearance: 0.750"
Top of Liner, MD: 9,246' Top of Liner, TVD: 8,695'
INTERVAL Interval Cum DESIGN SAFETY FACTOR
From To Footage Wt/Ft Conn Grade Weight Weight Tension Collapse Top Burst Btm Burst
9,246 11,712 2,466 29.00 SHFJ P-110 71,514 71,514 10.17 1.14 2.37 2.22
Design Conditions -Backup Gradient: 10.0 , ppg Completion Fluid Wt.: 13.2 , ppg Mud Weight: 13.2
Pore PSI For MASP: 11.8 , ppg TVD For MASP: 10,830' MASP, psi: 2,788
Cement Design -
% Excess OH: 50 Sacks of Lead: 470 Sacks of Tail: None
Cement Top: 9,246' Slurry Wt. Lead: 16.0 Slurry Wt. Tail:
Thickening Time: 5.0 hr Yield, ft/sx Lead: 1.14 Yield, ft/sx Tail:
Placement Time: 3.0 hr Volume, ft Lead: 536 Volume, ft Tail:
Spacer:
Type Lead Cement:
Type Tail Cement:
Well head:
Accessories:
Liner Equipment:
Page 7