EquestrianEquestrian GaragesGarages GardenGarden Offi cesOffi ces

Manufacturers of Quality Timber Buildings

Speci� cations & Price List

2010 - 2011

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Wall Construction

Wall Cladding

Roof Construction

Doors

Windows

Kickboards

Ventilation

Canopy/Overhang

Guttering

Height

Talk Grilles

Barge Boards

Timber Treatment

Speci� cations: Stables

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. One clear roof sheet is � tted to each Stable, Corner Unit and Tack Room. Optional roof � nishes include coloured Onduline, felt or felt tiles.

Stable doors are 2085mm high, 1200mm wide, 50mm thick, (6’10” high, 4’ wide, 2” thick) Bottom doors are lined with 18mm (¾ ”) heavy duty OS Board. Top doors are ledged and braced. Anti-chewstrips are � tted to the top of the lower door. All door � ttings are heavy duty and galvanised, to include 450mm (18”) heavy tee hinges, 200mm (8”) pad bolts, heavy duty kickbolts and a cabin hook to the top door. Tack Room doors are ledged and braced and � tted with a 200mm (8”) pad bolt.

Are available as an optional extra. However a clear roof sheet is � tted as standard.

Loose Boxes are lined to 1200mm (4’) with 11mm OS Board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard but can be lined if required.

Louvred ventilation grilles are � tted to gable ends of Loose Boxes only.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2235mm (7’4”) and to ridge 2845mm (9’4”), including brickwork.

Can be � tted between Loose Boxes as an option.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All exterior timber is pressure treated with Tanalith™ E wood preservative.

The Value Range

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Optional roof � nishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Stable doors are 2085mm high, 1200mm wide, 50mm thick, (6’10” high, 4’ wide, 2” thick). Bottom doors are lined with 18mm (¾”) heavy duty, moisture resistant kickboard. Top doors are ledged and braced. Anti-chewstrips are � tted to the top of the lower door. All door � ttings are heavy duty and galvanised, to include 450mm (18”) heavy tee hinges, 200mm (8”) pad bolts, heavy duty kickbolts and a cabin hook to the top door. Tack Room doors are ledged and braced and � tted with a 200mm (8”) pad bolt.

A fully opening 740mm x 740mm (29” x 29”) Perspex window, protected by a metal grille is standard to each Loose Box. Other windows are available on request.

Loose Boxes are lined to 1200mm (4’) with 18mm (¾”) high density, moisture resistant board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard but can be lined if required. As standard the external walls of Tack Rooms and Hay Stores are diagonally braced for extra strength.

Louvred ventilation grilles are � tted to gable ends of Loose Boxes only.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2235mm (7’4”) and to ridge 2845mm (9’4”), including brickwork.

Can be � tted between Loose Boxes as an option.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E (not including roof purlins).

The Clipper Range

2 | Quality Assured Manufacturing First Class Service Outstanding Value

The Clipper Range

The Value Range

The Clipper Range

The Value RangeThe Value RangeOur new Value Range of Stables are manufactured to the same, high, exacting

standards as our Clipper, Chart and Chester ranges and o� er incredible value for money. Don’t confuse these superb timber buildings with cheaper, inferior

alternatives. Looking after your horses has NEVER been better value!

Call 01233 611123 or Buy Online at www.chartstables.co.uk/store

Eque

stria

n: S

tabl

es

Pric

e Li

st: S

tabl

esWhy not choose a 1.8m overhang for your Chester Stable or upgrade to plyboard lining on the Clipper and Chart ranges. See page 15 for other options to personalise your building.

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 3

Loose Boxes 3.0m x 3.6m (10’ x 12’) £1,245 Extra Unit £995 3.6m x 3.6m (12’ x 12’) £1,345 Extra Unit £1,045 4.2m x 3.6m (14’ x 12’) £1,575 Extra Unit £1,245

Foaling Box 4.8m x 3.6m (16’ x 12’) £1,795

Corner Units 4.8m x 3.6m (16’ x 12’) £1,575 5.4m x 3.6m (18’ x 12’) £1,775

Tack Rooms 1.8m x 3.6m (6’ x 12’) £675 2.4m x 3.6m (8’ x 12’) £795 3.6m x 3.6m (12’ x 12’) £895

Integral Hay Stores 3.6m x 3.6m (12’ x 12’) £845 5.4m x 3.6m (18’ x 12’) £1,295 7.2m x 3.6m (24’ x 12’) £1,575 9.1m x 3.6m (30’ x 12’) £1,995 10.9m x 3.6m (36’ x 12’) £2,295

Covered Walkway 1.8m x 4.8m (6’ x 16’) £545 2.4m x 4.8m (8’ x 16’) £625 3.0m x 4.8m (10’ x 16’) £725 3.6m x 4.8m (12’ x 16’) £845

Archways 3.6m x 4.8m (12’ x 16’) £1,575 2.7m (9’) to eaves, 3.3m (11’) to ridge

Mobile Stables 3.6m x 3.0m (12’ x 10’) £1,895(Timber Skids) 7.0m x 3.0m (23’ x 10’) £2,8251.2m (4’) Overhang 3.6m x 3.6m (12’ x 12’) £1,995 7.0m x 3.6m (23’ x 12’) £2,925

Mobile Stables 3.6m x 3.0m (12’ x 10’) £1,995(Metal Skids) 7.2m x 3.0m (24’ x 10’) £3,2451.2m (4’) Overhang 10.9m x 3.0m (36’ x 10’) £4,595 3.6m x 3.6m (12’ x 12’) £2,095 7.2m x 3.6m (24’ x 12’) £3,345 10.9m x 3.6m (36’ x 12’) £4,795

The Clipper Range

Loose Boxes 3.0m x 3.6m (10’ x 12’) £1,045 Extra Unit £825 3.6m x 3.6m (12’ x 12’) £1,095 Extra Unit £850 4.2m x 3.6m (14’ x 12’) £1,295 Extra Unit £1,045

Foaling Box 4.8m x 3.6m (16’ x 12’) £1,495

Corner Units 4.8m x 3.6m (16’ x 12’) £1,195 5.4m x 3.6m (18’ x 12’) £1,395

Tack Rooms 1.8m x 3.6m (6’ x 12’) £495 2.4m x 3.6m (8’ x 12’) £595 3.6m x 3.6m (12’ x 12’) £695

Integral Hay Stores 3.6m x 3.6m (12’ x 12’) £625 5.4m x 3.6m (18’ x 12’) £1,095 7.2m x 3.6m (24’ x 12’) £1,195 9.1m x 3.6m (30’ x 12’) £1,595 10.9m x 3.6m (36’ x 12’) £1,795

Covered Walkway 1.8m x 4.8m (6’ x 16’) £495 2.4m x 4.8m (8’ x 16’) £595 3.0m x 4.8m (10’ x 16’) £695 3.6m x 4.8m (12’ x 16’) £795

Archways Not applicable

Mobile Stables 3.6m x 3.0m (12’ x 10’) £1,345(Timber Skids) 7.0m x 3.0m (23’ x 10’) £2,1451.2m (4’) Overhang 3.6m x 3.6m (12’ x 12’) £1,395 7.0m x 3.6m (23’ x 12’) £2,195

Mobile Stables 3.6m x 3.0m (12’ x 10’) £1,645(Metal Skids) 7.2m x 3.0m (24’ x 10’) £2,6951.2m (4’) Overhang 10.9m x 3.0m (36’ x 10’) £4,145 3.6m x 3.6m (12’ x 12’) £1,695 7.2m x 3.6m (24’ x 12’) £2,745 10.9m x 3.6m (36’ x 12’) £4,195

The Value Range

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Wall Construction

Wall Cladding

Roof Construction

Doors

Windows

Kickboards

Ventilation

Canopy/Overhang

Guttering

Height

Talk Grilles

Barge Boards

Timber Treatment

Speci� cations: Stables

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Optional roof � nishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Stable doors are 2085mm high, 1200mm wide, 70mm thick (6’ 10” high, 4’ wide, 2 ¾” thick). Bottom doors are lined with 18mm (¾”) heavy duty, moisture resistant kickboard. Top doors are ledged and braced. Anti-chewstrips are � tted to the top door surround and to the top of the lower door, extending down to 380mm (15”) at the front. All door � ttings are heavy duty and galvanised, to include 600mm (24”) heavy tee hinges, 200mm (8”) pad bolts, heavy duty kickbolts and a cabin hook to the top door. Tack Room doors are ledged and braced, � tted with 600mm (24”) hinges and a 200mm (8”) pad bolt.

A two bladed louvre window with a � xed lower section measuring 533mm x 915mm (21” x 36”) is � tted to all Loose Boxes. A heavy duty metal grille with 12mm (½”) solid bars spaced at 75mm (3”) centres is � tted to the rear.

Loose Boxes are lined to 1200mm (4’) with 18mm (¾”) high density, moisture resistant board and can be fully lined to eaves if required. Alternative types of kickboard are available on request. Tack Rooms and Hay Stores are not lined as standard but can be lined if required. As standard the external walls of Tack Rooms and Hay Stores are diagonally braced for extra strength.

Louvred ventilation grilles are � tted to gable ends of Loose Boxes only.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2235mm (7’4”) and to ridge 2845mm (9’4”), including brickwork.

Can be � tted between Loose Boxes as an option.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E (not including roof purlins).

The Chart Range

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres. When concrete or clay tile roofs are speci� ed, centres will be reduced and diagonal bracing included where necessary.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 125mm x 50mm (5” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. A clear roof sheet is included in each Loose Box. Optional roof � nishes include coloured Onduline, felt or felt tiles. Roof construction can also be altered to accept traditional clay, concrete or slate tiles.

Stable doors are 2235mm high, 1200mm wide, 70mm thick (7’ 4” high, 4’ wide, 2¾” thick) set in a pressure impregnated frame measuring 100mm x 75mm (4” x 3”) with rounded edges. Bottom doors are lined with 18mm (¾”) heavy duty plyboard. Top doors are ledged and braced with additional vertical bracing to the leading edge, and can be fully lined if preferred. Anti-chewstrips are � tted to the complete door frame, top door leading edge and the top of the lower door, extending down to 380mm (15”) at the front. All door � ttings are heavy duty and galvanised, to include 600mm (24”) reversible hinges, 200mm (8”) pad bolts, heavy duty kickbolts and cabin hooks. Tack Room doors are framed, ledged and braced with a plyboard internal lining and set in a frame identical to the stable door. A brass Yale security lock is included.

Six bladed louvre windows are � tted to all Loose Boxes and are fully adjustable from the outside, measuring 533mm x 915mm (21” wide x 36” high). A heavy duty grille with 12mm (½”) solid metal bars spaced at 75mm (3”) centres is � tted to the rear. Windows can be positioned to suit individual requirements. Other windows are available on request.

Loose Boxes are lined to 1200mm (4’) with 18mm (¾”) heavy duty exterior grade plyboard and can be lined to eaves height if required. Alternative types of kickboard are available on request. Tack Rooms and Hay Stores are not lined as standard but can be lined if required. As standard the external walls of Tack Rooms and Hay Stores are diagonally braced for extra strength.

Louvred ventilation grilles are � tted to gable ends of Loose Boxes only. Additional grilles can be � tted if required.

Front overhangs extend to 1200mm (4’) and are underlined in exterior grade plyboard. As an option overhangs can be increased to 1800mm (6’) and include 150mm x 150mm (6” x 6”) support posts with curved bracing.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2464mm (8’1”) and to ridge 3378mm (11’1”), including brickwork.

Can be � tted between Loose Boxes as an option.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E (not including roof purlins).

The Chester Range

4 | Quality Assured Manufacturing First Class Service Outstanding Value

The Chart RangeThe Chart Range

The Chester RangeThe Chester Range

Loose Boxes 3.0m x 3.6m (10’ x 12’) £1,895 Extra Unit £1,495 3.6m x 3.6m (12’ x 12’) £1,995 Extra Unit £1,545 4.2m x 3.6m (14’ x 12’) £2,195 Extra Unit £1,895

Foaling Box 4.8m x 3.6m (16’ x 12’) £2,045

Corner Units 4.8m x 3.6m (16’ x 12’) £1,995 5.4m x 3.6m (18’ x 12’) £2,295

Tack Rooms 1.8m x 3.6m (6’ x 12’) £875 2.4m x 3.6m (8’ x 12’) £1,045 3.6m x 3.6m (12’ x 12’) £1,245

Integral Hay Stores 3.6m x 3.6m (12’ x 12’) £1,045 5.4m x 3.6m (18’ x 12’) £1,545 7.2m x 3.6m (24’ x 12’) £1,895 9.1m x 3.6m (30’ x 12’) £2,375 10.9m x 3.6m (36’ x 12’) £2,745

Covered Walkway 1.8m x 4.8m (6’ x 16’) £745 2.4m x 4.8m (8’ x 16’) £875 3.0m x 4.8m (10’ x 16’) £975 3.6m x 4.8m (12’ x 16’) £1,045

Archways 3.6m x 4.8m (12’ x 16’) £1,795 3.3m (11’) to eaves, 3.9m (13’) to ridge

The Chester Range

Loose Boxes 3.0m x 3.6m (10’ x 12’) £1,545 Extra Unit £1,195 3.6m x 3.6m (12’ x 12’) £1,675 Extra Unit £1,245 4.2m x 3.6m (14’ x 12’) £1,795 Extra Unit £1,445

Foaling Box 4.8m x 3.6m (16’ x 12’) £1,845

Corner Units 4.8m x 3.6m (16’ x 12’) £1,645 5.4m x 3.6m (18’ x 12’) £1,845

Tack Rooms 1.8m x 3.6m (6’ x 12’) £725 2.4m x 3.6m (8’ x 12’) £875 3.6m x 3.6m (12’ x 12’) £995

Integral Hay Stores 3.6m x 3.6m (12’ x 12’) £945 5.4m x 3.6m (18’ x 12’) £1,395 7.2m x 3.6m (24’ x 12’) £1,695 9.1m x 3.6m (30’ x 12’) £2,095 10.9m x 3.6m (36’ x 12’) £2,395

Covered Walkway 1.8m x 4.8m (6’ x 16’) £575 2.4m x 4.8m (8’ x 16’) £675 3.0m x 4.8m (10’ x 16’) £795 3.6m x 4.8m (12’ x 16’) £895

Archways 3.6m x 4.8m (12’ x 16’) £1,695 2.7m (9’) to eaves, 3.3m (11’) to ridge

Loose Boxes 3.0m x 3.6m (10’ x 12’) £1,545

The Chart Range

Eque

stria

n: S

tabl

es

Pric

e Li

st: S

tabl

esWhy not choose a 1.8m overhang for your Chester Stable or upgrade to plyboard lining on the Clipper and Chart ranges. See page 15 for other options to personalise your building.

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 5

Wall Construction

Wall Cladding

Roof Construction

Timber Mobile Skids

Metal Mobile Skids

Kickboards

Ventilation

Canopy/Overhang

Guttering

Height

Barge Boards

Timber Treatment

Speci� cations: Field Shelters

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap / Weatherboarding, pressure impregnated with Tanalith E to ensure a long,maintenance free life. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders onprefabricated trusses, then covered with black Onduline roof sheeting. Optional roof � nishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Timber skids are constructed using pressure treated 150mm x 75mm (6” x 3”) in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy duty chain is supplied.

Metal skids are constructed using 100mm x 100mm x 5mm box steel. Towing points are located at both ends and a heavy duty chain is supplied.

Field Shelters are lined to 1200mm (4’) with 11mm OS Board and can be lined to eaves if required.

Louvred ventilation grilles are � tted to each gable end.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2160mm (7’1”) and to ridge 2770mm (9’1”), not including brickwork, or skids.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All exterior timber has been treated with Tanalith™ E wood preservative.

The Value Range

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Optional roof � nishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Timber skids are constructed using pressure treated 150mm x 75mm (6” x 3”) in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy duty chain is provided.

Metal skids are constructed using 100mm x 100mm x 5mm box steel. Towing points are located at both ends and a heavy duty chain is supplied.

Field Shelters are lined to 1200mm (4’) with 18mm (¾”) high density, moisture resistant board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard. Alternative types of kickboard are available.

Louvred ventilation grilles are � tted to each gable end.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2160mm (7’1”) and to ridge 2770mm (9’1”), not including brickwork, or skids.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E (not including roof purlins).

The Clipper Range

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Optional roof � nishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Timber skids are constructed using pressure treated 150mm x 75mm (6” x 3”) in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy duty chain is provided.

Metal skids are constructed using 100mm x 100mm x 5mm box steel. Towing points are located at both ends and a heavy duty chain is supplied.

Field Shelters are lined to 1200mm (4’) with 18mm (¾”) high density, moisture resistant board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard. Alternative types of kickboard are available.

Louvred ventilation grilles are � tted to each gable end.

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Half round, black guttering and downpipe is � tted to the front of all units. Rear guttering is available on request.

To eaves, measures 2160mm (7’1”) and to ridge 2770mm (9’1”), not including brickwork, or skids.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E (not including roof purlins).

The Chart Range

6 | Quality Assured Manufacturing First Class Service Outstanding Value

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Eque

stria

n: F

ield

She

lters

Pric

e Li

st: F

ield

She

lters

Choose between timber or metal skids, why not add a 2.1m (7’) metal gate or even have a stable front added, you choose what’s best for you...See page 16 for other options to personalise your building.

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 7

Timber Skids 3.6m x 3.0m (12’ x 10’) £1,425No Overhang 5.4m x 3.0m (18’ x 10’) £1,795 7.0m x 3.0m (23’ x 10’) £2,195

3.6m x 3.6m (12’ x 12’) £1,495 5.4m x 3.6m (18’ x 12’) £1,895 7.0m x 3.6m (23’ x 12’) £2,295

Timber Skids 3.6m x 3.0m (12’ x 10’) £1,5951.2m (4’) Overhang 5.4m x 3.0m (18’ x 10’) £2,145 7.0m x 3.0m (23’ x 10’) £2,495

3.6m x 3.6m (12’ x 12’) £1,695 5.4m x 3.6m (18’ x 12’) £2,250 7.0m x 3.6m (23’ x 12’) £2,595

Metal Skids 3.6m x 3.0m (12’ x 10’) £1,595No Overhang 5.4m x 3.0m (18’ x 10’) £2,095 7.2m x 3.0m (24’ x 10’) £2,595 10.9m x 3.0m (36’ x 10’) £3,595

3.6m x 3.6m (12’ x 12’) £1,695 5.4m x 3.6m (18’ x 12’) £2,195 7.2m x 3.6m (24’ x 12’) £2,695 10.9m x 3.6m (36’ x 12’) £3,795

Metal Skids 3.6m x 3.0m (12’ x 10’) £1,7951.2m (4’) Overhang 5.4m x 3.0m (18’ x 10’) £2,495 7.2m x 3.0m (24’ x 10’) £2,795 10.9m x 3.0m (36’ x 10’) £3,895

3.6m x 3.6m (12’ x 12’) £1,845 5.4m x 3.6m (18’ x 12’) £2,595 7.2m x 3.6m (24’ x 12’) £2,895 10.9m x 3.6m (36’ x 12’) £4,095

Timber Skids 3.6m x 3.6m (12’ x 12’) £1,045No Overhang 5.4m x 3.6m (18’ x 12’) £1,345Weatherboard 7.0m x 3.6m (23’ x 12’) £1,495

Timber Skids 3.6m x 3.6m (12’ x 12’) £1,185No Overhang 5.4m x 3.6m (18’ x 12’) £1,545Shiplap 7.0m x 3.6m (23’ x 12’) £1,725

Timber Skids 3.6m x 3.6m (12’ x 12’) £1,2951.2m (4’) Overhang 5.4m x 3.6m (18’ x 12’) £1,675Shiplap 7.0m x 3.6m (23’ x 12’) £1,895

Metal Skids 3.6m x 3.6m (12’ x 12’) £1,425No Overhang 5.4m x 3.6m (18’ x 12’) £1,925Shiplap 7.2m x 3.6m (24’ x 12’) £2,195 10.9m x 3.6m (36’ x 12’) £3,275

Metal Skids 3.6m x 3.6m (12’ x 12’) £1,5251.2m (4’) Overhang 5.4m x 3.6m (18’ x 12’) £2,095Shiplap 7.2m x 3.6m (24’ x 12’) £2,345 10.9m x 3.6m (36’ x 12’) £3,515

Value Mobile Field Shelters Clipper Mobile Field Shelters

Fields Shelters 3.6m x 3.6m (12’ x 12’) £1,195Apex Roof 5.4m x 3.6m (18’ x 12’) £1,495No Overhang 7.2m x 3.6m (24’ x 12’) £1,895 9.1m x 3.6m (30’ x 12’) £2,495 10.9m x 3.6m (36’ x 12’) £2,645

Field Shelters 3.6m x 3.6m (12’ x 12’) £1,295Apex Roof 5.4m x 3.6m (18’ x 12’) £1,8951.2m (4’) Overhang 7.2m x 3.6m (24’ x 12’) £2,095 9.1m x 3.6m (30’ x 12’) £2,795 10.9m x 3.6m (36’ x 12’) £2,995

Pent Style 3.6m x 3.6m (12’ x 12’) £1,045Weatherboard 5.4m x 3.6m (18’ x 12’) £1,245No Overhang 7.2m x 3.6m (24’ x 12’) £1,475 9.1m x 3.6m (30’ x 12’) £1,675 10.9m x 3.6m (36’ x 12’) £1,895

Static: The Clipper Range

Fields Shelters 3.6m x 3.6m (12’ x 12’) £1,245Apex Roof 5.4m x 3.6m (18’ x 12’) £1,575No Overhang 7.2m x 3.6m (24’ x 12’) £1,995 9.1m x 3.6m (30’ x 12’) £2,595 10.9m x 3.6m (36’ x 12’) £2,795

Field Shelters 3.6m x 3.6m (12’ x 12’) £1,345Apex Roof 5.4m x 3.6m (18’ x 12’) £1,9951.2m (4’) Overhang 7.2m x 3.6m (24’ x 12’) £2,195 9.1m x 3.6m (30’ x 12’) £2,945 10.9m x 3.6m (36’ x 12’) £3,135

Static: The Chart Range

Chart Mobile Field Shelters, price on application.

Wall Construction

Wall Cladding

Roof Construction

Internal Sections

Doors

Windows

Ventilation

Kickboards

Guttering

Height

Barge Boards

Timber Treatment

Speci� cations: American Barns

Walls are built with 100mm x 50mm (4” x 2”) timber framing, at spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 450mm (18”) centres, which are held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. A clear roof sheet is also included in each stall. Optional roof � nishes include coloured Onduline, felt or felt tiles.

Internal panels are timber framed using 100mm x 50mm (4” x 2”) and are kickboard lined to 1200mm (4’). Heavy duty metal grilles with solid 12mm (½”) bars are � tted above. Internal panels are 2.2m (86⅝”) high.

A side-hinged lower stable door 1320mm high, 1200mm wide, 70mm thick (52” x 48” x 2¾”) are � tted. Doors are faced with shiplap and kickboard is � tted to the rear. Anti-chewstrips are � tted to the top door surround and to the top of the door extending 380mm (15”) at the front. All door � ttings are heavy duty and galvanised, to include 600mm (24”) tee hinges, 200mm (8”) pad bolts, kickbolts and a cabin hook. A sliding door measuring 2400mm (8’) wide is � tted to the front of the building. Top doors can be � tted to the rear of each stall as an option.

A choice of windows are available as optional extras.

2 x louvred ventilation grilles are � tted to each gable end.

External walls are lined with 18mm (¾”) high density, moisture resistant board to 1200mm (4’) and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard.

Half round, black guttering and down pipes are � tted to both sides of the building.

To eaves, measures 2235mm (7’4”) and to ridge 3861mm (12’8”), including brickwork.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

All timber is pressure treated with Tanalith™ E wood preservative (excluding roof purlins).

The Standard Barn

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 100mm x 50mm (4” x 2”) spaced at 450mm (18”) centres, which are held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. A clear roof sheet is also included in each stall. Optional roof � nishes include coloured Onduline, felt or felt tiles.

Internal panels are metal framed, the lower section is in� lled with 42mm softwood to 1200m (4’) and the upper section is constructed using 20mm hollow steel bars spaced at 75mm (3”) centres. Dividing panels can be in� lled to eaves height if required. Panel height 2200 mm (86⅝”). Reconstituted plastic in� lls are available as an option.

Sliding stable doors are 2100mm high x 1280mm wide, the lower section is in� lled with 42mm softwood timber and measures 1280mm x 1280mm (503⁄8” x 503⁄8”). The top section measures 820mm x 1280mm (32¼” x 503⁄8”) and incorporates an opening section measuring 560mm x 760mm (22” x 30”). 20mm hollow steel bars are spaced at 75mm (3”) centres. A sliding door measuring 2400mm (8’) wide x 2100mm (7’) high is � tted to the front of the building. Top doors can be � tted to the rear of each stall as an option.

A choice of windows are available as an optional extra.

2 x louvred ventilation grilles are � tted to each gable end.

External walls are lined with 18mm (¾”) high density, moisture resistant board to 1200mm (4’) and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard. Alternative types of kickboard are available on request.

Half round, black guttering and down pipes are � tted to both sides of the building.

To eaves, measures 2235mm (7’4”) and to ridge 3861mm (12’8”), including brickwork.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

External timbers and framework pressure treated with Tanalith™ E (excluding roof purlins).

The Delux Barn

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced 600mm (2’) centres. When concrete or clay tile roofs are speci� ed, centres will be reduced and diagonal bracing included where necessary.

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long, maintenance-free life. Weatherboard is available as an option. All boarding is � xed with rust resisting nails.

Purlins are 125mm x 50mm (5” x 2”) spaced at 450mm (18”) centres, which are held in place by joist holders on prefabricated trusses, then covered with OS board, battens and black Onduline roof sheeting. A clear roof sheet is included in each stall. Optional roof � nishes include coloured Onduline, felt or felt tiles. Roof construction can also be altered to accept traditional clay, concrete or slate tiles.

Victorian style internal panels are metal framed, with 20mm hollow steel bars spaced at 75mm (3”) centres. 42mm hardwood is used to in� ll the lower section to 1200mm (48”). Dividing panels can be in� lled to eaves height 2200mm (86⅝”) if required. Reconstituted plastic in� lls are available as an option.

Lower stables doors are 1450mm x 1120mm (57” x 44”) and are in� lled with 42mm hardwood timber to 1245mm (49”), 20mm hollow steel bars spaced at 75mm (3”) centres are � tted above. A sliding door measuring 2400mm (8’) wide x 2234mm (7’4”) high is � tted to the front of the building. Top doors can be � tted to the rear of each stall as an option.

A 6 bladed louvre window is � tted as standard to each stall and are fully adjustable from the outside, measuring 533mm x 915mm (21” x 36”). A heavy duty metal grille is � tted.

2 x louvred ventilation grilles are � tted to each gable end. Additional grilles can be � tted if required.

External walls are lined with 18mm (¾”) heavy duty exterior grade plyboard to 1200mm (4’) and can be lined to eaves height if required. Alternative types of kickboard are available on request. Tack Rooms and Hay Stores are not lined as standard.

Half round, black guttering and down pipes are � tted to both sides of the building.

To eaves, measures 2400mm (8’) and to ridge 4089mm (13’5”), not including brickwork.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

External timbers and framework pressure treated with Tanalith™ E (excluding roof purlins).

The Superior Barn

8 | Quality Assured Manufacturing First Class Service Outstanding Value

Alternative Ironmongery options available... See page 19

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19

Eque

stria

n: A

mer

ican

Bar

ns

Pric

e Li

st: A

mer

ican

Bar

ns

Why not add a swivel feeder to your Delux or Superior stalls? We also supply mangers, saddle racks, mats and more...See page 16 for other options and accessories to personalise your barn.

3.0m x 3.6m Stalls 6.0m x 10.3m (20’ x 34’) £11,925(10’ x 12’ Stalls) 9.1m x 10.3m (30’ x 34’) £17,62510.36m (34’) wide 12.1m x 10.3m (40’ x 34’) £23,350with 3.0m (10’) 15.2m x 10.3m (50’ x 34’) £28,995passageway. 18.2m x 10.3m (60’ x 34’) £34,795 Extra 3.0m (10’) 2 Stalls £5,715

3.6m x 3.6m Stalls 7.3m x 10.3m (24’ x 34’) £13,295(12’ x 12’ Stalls) 10.9m x 10.3m (36’ x 34’) £19,37510.36m (34’) wide 14.6m x 10.3m (48’ x 34’) £25,695with 3.0m (10’) 18.2m x 10.3m (60’ x 34’) £31,550passageway. 21.9m x 10.3m (72’ x 34’) £37,650 Extra 3.6m (12’) 2 Stalls £6,095

Superior Internal Partitions3.6m x 2.2m (1413/4” x 863/4”) dividing panel with 42mm hardwood in� lls to 1.2m £4653.6m x 2.2m (1413/4” x 863/4”) dividing panel with 42mm hardwood in� lls to 2.2m £4653.0m x 2.2m (1183/4” x 863/4”) front panel with 42mm hardwood in� lls to 1.2m £8453.6m x 2.2m (1413/4” x 863/4”) front panel with 42mm hardwood in� lls to 1.2m £995

The Superior Barn

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 9

3.0m x 3.6m Stalls 6.0m x 10.3m (20’ x 34’) £9,195(10’ x 12’ Stalls) 9.1m x 10.3m (30’ x 34’) £13,27510.36m (34’) wide 12.1m x 10.3m (40’ x 34’) £17,365with 3.0m (10’) 15.2m x 10.3m (50’ x 34’) £21,450passageway. 18.2m x 10.3m (60’ x 34’) £25,545 Extra 3.0m (10’) 2 Stalls £4,085

3.6m x 3.6m Stalls 7.3m x 10.3m (24’ x 34’) £10,250(12’ x 12’ Stalls) 10.9m x 10.3m (36’ x 34’) £15,19510.36m (34’) wide 14.6m x 10.3m (48’ x 34’) £20,095with 3.0m (10’) 18.2m x 10.3m (60’ x 34’) £24,995passageway. 21.9m x 10.3m (72’ x 34’) £29,950 Extra 3.6m (12’) 2 Stalls £4,925

Delux Internal Partitions3.6m x 2.2m (1413/4” x 863/4”) dividing panel with 42mm softwood in� lls to 1.2m £4153.6m x 2.2m (1413/4” x 863/4”) dividing panel with 42mm softwood in� lls to 2.2m £4153.0m x 2.2m (1183/4” x 863/4”) front panel with 42mm softwood in� lls to 1.2m with sliding door £5503.6m x 2.2m (1413/4” x 863/4”) front panel with 42mm softwood in� lls to 1.2m with sliding door £695

The Delux Barn

3.0m x 3.6m Stalls 6.0m x 10.3m (20’ x 34’) £7,745(10’ x 12’ Stalls) 9.1m x 10.3m (30’ x 34’) £10,75010.36m (34’) wide 12.1m x 10.3m (40’ x 34’) £13,750with 3.0m (10’) 15.2m x 10.3m (50’ x 34’) £16,750passageway. 18.2m x 10.3m (60’ x 34’) £19,725 Extra 3.0m (10’) 2 Stalls £2,995

3.6m x 3.6m Stalls 7.3m x 10.3m (24’ x 34’) £8,495(12’ x 12’ Stalls) 10.9m x 10.3m (36’ x 34’) £11,79510.36m (34’) wide 14.6m x 10.3m (48’ x 34’) £15,095with 3.0m (10’) 18.2m x 10.3m (60’ x 34’) £18,415passageway. 21.9m x 10.3m (72’ x 34’) £21,715 Extra 3.6m (12’) 2 Stalls £3,295

Standard Internal Partitions3.6m x 2.2m (1413/4” x 863/4”) dividing panel with metal grille lined with 18mm (3/4”) V313 to 1.2m (4’) £3153.6m x 2.2m (1413/4” x 863/4”) dividing panel with metal grille lined with 18mm (3/4”) Plyboard to 1.2m (4’) £3453.6m x 2.2m (1413/4” x 863/4”) dividing panel fully lined to 2.2m both sides with 18mm (3/4”) V313 £2153.6m x 2.2m (1413/4” x 863/4”) dividing panel fully lined to 2.2m both sides with 18mm (3/4”) Plyboard £3153.0m x 2.2m (1183/4” x 863/4”) shiplap front panel with metal grilles lined with 18mm (3/4”) V313 to 1.2m (4’) including lower door £2653.0m x 2.2m (1183/4” x 863/4”) shiplap front panel with metal grilles lined with 18mm (3/4”) Plyboard to 1.2m (4’) including lower door £2953.6m x 2.2m (1413/4” x 863/4”) shiplap front panel with metal grilles lined with 18mm (3/4”) V313 to 1.2m (4’) including lower door £2953.6m x 2.2m (1413/4” x 863/4”) shiplap front panel with metal grilles lined with 18mm (3/4”) Plyboard to 1.2m (4’) including lower door £315

The Standard Barn

Standard Delux Superior

Wall Construction

Wall Cladding

Wall Lining

Roof Construction

Doors

Windows

Height

Guttering

Barge Boards

Floors

Timber Treatment

Speci� cations: Garaging & Workshops

Garage walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres, and are diagonally braced at corner sections.

Selected high quality Shiplap or Weatherboard, pressure impregnated to ensure a long maintenance-free life. Loglap is available. All boarding is � xed with rust resisting nails.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade. This is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Purlins are 125mm x 50mm (5” x 2”) which are held in place by joist holders on prefabricated trusses, then boarded with OS board, battened and covered with black Onduline roof sheeting. Options include coloured Onduline, felt or felt tiles.

Doors are framed, ledged and braced, faced with Shiplap, and a ply interior lining. Doors are � tted in a 100mm x 75mm (4” x 3”) frame and hung on 508mm (20”) heavy reversible galvanised hinges. Double 2286mm (7’6”) wide doors are standard. Also available are personal inward or outward opening doors, joinery grade doors with frames or up and over doors.

A range of single and double, glazed and unglazed casement windows are available on request. Glazing for the above can also be supplied.

To eaves either 2235mm (7’4”) or 2464mm (8’1”) when on a single course of brickwork. Apex height will vary depending upon the width of the building, please enquire.

Black 100mm (4”) half round guttering and down pipes are � tted to both sides of the building.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

Can be � tted as an optional extra. High density, � ooring grade 18mm (¾”) V313 moisture resistant board is placed on 75mm x 50mm (3” x 2”) pressure impregnated timbers spaced at 406mm (16”) centres. Alternatively, tongue and grooved � oor boarding is available.

All timber is pressure treated with Tanalith™ E wood preservative (excluding roof purlins).

Garages

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Selected high quality Shiplap and Weatherboard, pressure impregnated to ensure a long maintenance-free life. Loglap is available. All boarding is � xed with rust resisting nails.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade. This is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Purlins are 100mm x 50mm (4” x 2”) which are held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Options include coloured Onduline, felt or felt tiles.

A single 762mm (30”) wide outward opening personal door is included as standard. Doors are framed, ledged and braced, faced with Shiplap and a ply interior lining. Also available are personal inward opening doors, double doors, joinery grade doors with frames or up and over doors. All door � ttings are galvanised.

A range of single and double, glazed and unglazed casement windows are available on request. Glazing for the above can also be supplied.

To eaves either 2235mm (7’4” ) or 1980mm (6’6”) when on a single course of brickwork. Apex heights will vary depending upon the width of the building, please enquire.

Black 100mm (4”) half round guttering and down pipes are � tted to both sides of the building.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

Can be � tted as an optional extra. High density, � ooring grade 18mm (¾”) V313 moisture resistant board is placed on 75mm x 50mm (3” x 2”) pressure impregnated timbers spaced at 406mm (16”) centres. Alternatively, tongue and grooved � oor boarding is available

All timber is pressure treated with Tanalith™ E wood preservative (excluding roof purlins).

Workshops

Walls are built with 100mm x 50mm (4” x 2”) timber framing, spaced at 600mm (2’) centres, and are diagonally braced at corners.

Selected high quality Shiplap and Weatherboard, pressure impregnated to ensure a long maintenance-free life. Loglap is available. All boarding is � xed with rust resisting nails.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade. This is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Purlins are 125mm x 50mm (5” x 2”) which are held in place by joist holders on prefabricated trusses, then boarded with OS board, battened and covered with black Onduline roof sheeting. Options include coloured Onduline, felt or felt tiles.

Entrance ways to Carriage Houses are 150mm x 150mm (6” x 6”) with curved bracing manufactured from 300mm x 50mm (12” x 2”) timber. Doors can be � tted as optional extras.

A range of single and double, glazed and unglazed casement windows are available on request. Glazing for the above can also be supplied.

To eaves 2464mm (8’1”) when on a single course of brickwork. Carriage Houses are also available with an eaves height of 2743mm (9’) as an option. Apex heights will vary depending upon the width of the building, please enquire.

Black 100mm (4”) half round guttering and down pipes are � tted to the front and rear.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

Can be � tted as an optional extra. High density, � ooring grade 18mm (¾”) V313 moisture resistant board is placed on 75mm x 50mm (3” x 2”) pressure impregnated timbers spaced at 406mm (16”) centres. Alternatively, tongue and grooved � oor boarding is available

All timber is pressure treated with Tanalith™ E wood preservative (excluding roof purlins).

Carriage Houses

10 | Quality Assured Manufacturing First Class Service Outstanding Value

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Gar

agin

g &

Wor

ksho

ps

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 11

3m (10’) Wide 5.4m x 3.0m (18’ x 10’) £1,895 7.2m x 3.0m (24’ x 10’) £2,295 9.1m x 3.0m (30’ x 10’) £2,795 10.9m x 3.0m (36’ x 10’) £3,345 12.8m x 3.0m (42’ x 10’) £3,895 14.6m x 3.0m (48’ x 10’) £4,395

3.6m (12’) Wide 3.6m x 3.6m (12’ x 12’) £1,475 5.4m x 3.6m (18’ x 12’) £1,995 7.2m x 3.6m (24’ x 12’) £2,495 9.1m x 3.6m (30’ x 12’) £2,995 10.9m x 3.6m (36’ x 12’) £3,575 12.8m x 3.6m (42’ x 12’) £4,095 14.6m x 3.6m (48’ x 12’) £4,595

4.8m (16’) Wide 5.4m x 4.8m (18’ x 16’) £2,295 7.2m x 4.8m (24’ x 16’) £2,895 9.1m x 4.8m (30’ x 16’) £3,495 10.9m x 4.8m (36’ x 16’) £3,995 12.8m x 4.8m (42’ x 16’) £4,595 14.6m x 4.8m (48’ x 16’) £5,195

5.4m (18’) Wide 5.4m x 5.4m (18’ x 18’) £2,795 7.2m x 5.4m (24’ x 18’) £3,450 9.1m x 5.4m (30’ x 18’) £4,095 10.9m x 5.4m (36’ x 18’) £4,695 12.8m x 5.4m (42’ x 18’) £5,345 14.6m x 5.4m (48’ x 18’) £5,995

6.1m (20’) Wide 6.1m x 6.1m (20’ x 20’) £3,595 7.2m x 6.1m (24’ x 20’) £4,195 9.1m x 6.1m (30’ x 20’) £4,825 10.9m x 6.1m (36’ x 20’) £5,450 12.8m x 6.1m (42’ x 20’) £6,095 14.6m x 6.1m (48’ x 20’) £6,745

7.2m (24’) Wide 7.2m x 7.2m (24’ x 24’) £4,295 9.1m x 7.2m (30’ x 24’) £4,995 10.9m x 7.2m (36’ x 24’) £5,775 12.8m x 7.2m (42’ x 24’) £6,495 14.6m x 7.2m (48’ x 24’) £7,245

Garages 2.1m (7’) Eaves Height

5.4m (18’) Wide3m (10’) Bays 6.1m x 5.4m (20’ x 18’) 2 Bays £2,995 9.1m x 5.4m (30’ x 18’) 3 Bays £3,895 12.2m x 5.4m (40’ x 18’) 4 Bays £4,725

3.6m (12’) Bays 7.3m x 5.4m (24’ x 18’) 2 Bays £3,245 10.9m x 5.4m (36’ x 18’) 3 Bays £4,095 14.6m x 5.4m (48’ x 18’) 4 Bays £4,945

6.1m (20’) Wide 3m (10’) Bays 6.1m x 6.1m (20’ x 20’) 2 Bays £3,845 9.1m x 6.1m (30’ x 20’) 3 Bays £5,195 12.2m x 6.1m (40’ x 20’) 4 Bays £6,645

3.6m (12’) Bays 7.3m x 6.1m (24’ x 20’) 2 Bays £4,450 10.9m x 6.1m (36’ x 20’) 3 Bays £5,845 14.6m x 6.1m (48’ x 20’) 4 Bays £7,250

7.3m (24’) Wide 3m (10’) Bays 6.1m x 7.3m (20’ x 24’) 2 Bays £3,975 9.1m x 7.3m (30’ x 24’) 3 Bays £5,395 12.2m x 7.3m (40’ x 24’) 4 Bays £6,745

3.6m (12’) Bays 7.3m x 7.3m (24’ x 24’) 2 Bays £4,595 10.9m x 7.3m (36’ x 24’) 3 Bays £6,195 14.6m x 7.3m (48’ x 24’) 4 Bays £7,795

Carriage Houses 2.4m (8’) Eaves Height

1.8m (6’) Wide 3.0m x 1.8m (10’ x 6’) £675 3.6m x 1.8m (12’ x 6’) £775 4.2m x 1.8m (14’ x 6’) £925

2.4m (8’) Wide 3.0m x 2.4m (10’ x 8’) £875 3.6m x 2.4m (12’ x 8’) £1,025 4.2m x 2.4m (14’ x 8’) £1,195

2.7m (9’) Wide 3.6m x 2.7m (12’ x 9’) £1,045 5.4m x 2.7m (18’ x 9’) £1,475 7.2m x 2.7m (24’ x 9’) £1,895 9.1m x 2.7m (30’ x 9’) £2,295 10.9m x 2.7m (36’ x 9’) £2,725

3.6m (12’) Wide 3.6m x 3.6m (12’ x 12’) £1,145 5.4m x 3.6m (18’ x 12’) £1,575 7.2m x 3.6m (24’ x 12’) £1,995 9.1m x 3.6m (30’ x 12’) £2,395 10.9m x 3.6m (36’ x 12’) £2,825

4.8m (16’) Wide 5.4m x 4.8m (18’ x 16’) £1,895 7.2m x 4.8m (24’ x 16’) £2,395 9.1m x 4.8m (30’ x 16’) £2,945 10.9m x 4.8m (36’ x 16’) £3,450

5.4m (18’) Wide 5.4m x 5.4m (18’ x 18’) £2,250 7.2m x 5.4m (24’ x 18’) £2,795 9.1m x 5.4m (30’ x 18’) £3,295 10.9m x 5.4m (36’ x 18’) £3,845

Workshops 1.92m (6’ 3”) Eaves Height

Workshops 2.1m (7’) Eaves Height

Why not mix and match, for example, Carriage houses can include stores or be attached to Garages and Offi ces...Please call us to discuss your requirements, our bespoke design service ensures you get exactly what you want.

Pric

e Li

st: G

arag

ing

& W

orks

hops

Wall Construction

Wall Cladding

Wall Lining

Roof Construction

Doors

Windows

Height

Guttering

Barge Boards

Floors

Timber Treatment

Speci� cations: Garden Buildings

Walls are built with 100mm x 50mm (4” x 2”) timber framing spaced at 600mm (2’) centres, and are diagonally braced where necessary.

Selected high quality Shiplap, Weatherboard or Loglap pressure impregnated Tanalith E™ to ensure a long maintenance-free life. All boarding is � xed with rust resisting nails treated to ensure a long maintenance-free life.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Purlins are 125mm x 50mm (5” x 2”) which are held in place by joist holders on prefabricated trusses. Roofs are then boarded with 18mm Plyboard and covered with 38kg green mineral felt. A 904mm (3’) canopy is included to the front of the building. Options include Onduline roof sheeting, cedar shingles or felt tiles.

Double French doors complete with frame, door sill and 14mm double glazing are included. Doors are outward opening. We can also o� er a range of hardwood and softwood doors details of which can be found on page 44 of our brochure.

We include 2 x opening Georgian casement style windows � tted with 14mm double glazing, and measure 631mm x 1050mm (20⅞ x 41⅜).Further options of single and double glazed units can be found on page 45 of our brochure.

To eaves 2285mm (7’6”) not including the � oor or brickcourse, we are able to increase this should you require. The overall height of the building will vary upon the width of the building, please enquire.

Black 100mm (4”) half round guttering and down pipes are � tted to both sides of the building.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

Floors are constructed using 75mm x 50mm (3” x 2”) joists as framing which is then covered with 18mm (¾”) V313 board. Tongue and groove � oor boards are available. Insulation can be added as an optional extra.

All timber is pressure treated with Tanalith™ E excluding purlins, joinery grade doors and windows.

Summer Houses

Walls are built with 100mm x 50mm (4” x 2”) timber framing spaced at 600mm (2’) centres, and are diagonally braced where necessary.

Selected high quality Shiplap, Weatherboard or Loglap pressure impregnated Tanalith E™ to ensure a long maintenance-free life. All boarding is � xed with rust resisting nails treated to ensure a long maintenance-free life.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Purlins are 125mm x 50mm (5” x 2”) which are held in place by joist holders on prefabricated trusses. Roofs are then boarded with 18mm Plyboard and covered with 38kg mineral felt. A 1.2m (4’) lined canopy is included to the front of the building. Options include Onduline roof sheeting, cedar shingles or felt tiles.

Double French doors complete with frame, door sill and 14mm double glazing are included. Doors are outward opening. We can also o� er a range of hardwood and softwood doors, details of which can be found on page 44 of our brochure.

We include 2 x opening Georgian casement style windows � tted with 14mm double glazing, and measure 631mm x 1050mm (20⅞ x 41⅜). Further options of single and double glazed units can be found on page 45 of our brochure.

To eaves 2285mm (7’6”) not including the � oor or brickcourse, we are able to increase this should you require. The overall height of the building will vary upon the width of the building, please enquire.

Black 100mm (4”) half round guttering and down pipes are � tted to the front and rear of the building.

All in pressure impregnated, prepared timber, � xed with rust resisting nails.

Floors are constructed using 75mm x 50mm (3” x 2”) joists as framing which is then covered with 18mm (¾”) V313 board. Tongue and groove � oor boards are available. Insulation can be added as an optional extra. A 1.2m (4’) Verandah with Newel Posts, Curved Bracing, Spindles, Hand Rails and Decking are included. Larger Verandah’s are available.

All timber is pressure treated with Tanalith™ E excluding purlins, joinery grade doors and windows.

Pavillions

Are upright support posts, 150mm x 150mm (6” x 6”) pressure treated softwood framing and include curved bracing. Wall panels are available as an option.

N/A

N/A

Roofs are a conventional pitched rafter design using 125mm x 50mm (5”x 2”) rafters boarded with 18mm (¾”) Plyboard and then covered with felt tiles. A choice of colours are available.Other roof � nishes are available.

N/A

N/A

To eaves 2285mm (7’6”) not including the � oor or brickcourse, we are able to increase this should you require. The overall height of the building will vary upon the width of the building, please enquire.

Is not included, but can be � tted as an optional extra.

N/A

Floors are constructed using 75mm x 50mm (3” x 2”) joists as framing which is then covered with 22mm (7⁄8”) pressure treated decking.

All timber is pressure treated with Tanalith™ E wood preservative (excluding roof purlins).

Gazebos

12 | Quality Assured Manufacturing First Class Service Outstanding Value

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Gar

den

Build

ings

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 13

All Summer Houses include a 0.9m (3’) Overhang3m (10’) Wide 2.4m x 3.0m (8’ x 10’) £1,995 3.6m x 3.0m (12’ x 10’) £2,445 4.8m x 3.0m (16’ x 10’) £2,845 5.4m x 3.0m (18’ x 10’) £3,295

3.6m (12’) Wide 2.4m x 3.6m (8’ x 12’) £2,095 3.6m x 3.6m (12’ x 12’) £2,545 4.8m x 3.6m (16’ x 12’) £2,945 5.4m x 3.6m (18’ x 12’) £3,395

4.8m (16’) Wide 3.6m x 4.8m (12’ x 16’) £2,795 4.8m x 4.8m (16’ x 16’) £3,195 5.4m x 48m (18’ x 16’) £3,595

5.4m (18’) Wide 3.6m x 5.4m (12’ x 18’) £3,395 4.8m x 5.4m (16’ x 18’) £3,945 5.4m x 5.4m (18’ x 18’) £4,450

Summer Houses 2.1m (7’) Eaves Height

Square Gazebos 2.4m x 2.4m (8’ x 8’) £1,295 3.0m x 3.0m (10’ x 10’) £1,595 3.6m x 3.6m (12’ x 12’) £1,895

Gazebos 2.31m (7’6”) Eaves Height

3.6m (12’) Wide 3.6m x 3.6m (12’ x 12’) £2,695 5.4m x 3.6m (18’ x 12’) £3,695 7.3m x 3.6m (24’ x 12’) £4,645 9.1m x 3.6m (30’ x 12’) £5,495 10.9m x 3.6m (36’ x 12’) £6,575

4.8m (16’) Wide 5.4m x 4.8m (18’ x 16’) £3,895 7.3m x 4.8m (24’ x 16’) £4,995 9.1m x 4.8m (30’ x 16’) £6,245 10.9m x 4.8m (36’ x 16’) £7,415

5.4m (18’) Wide 5.4m x 5.4m (18’ x 18’) £4,895 7.3m x 5.4m (24’ x 18’) £5,995 9.1m x 5.4m (30’ x 18’) £7,195 10.9m x 5.4m (36’ x 18’) £8,375

6.1m (20’) Wide 7.3m x 6.1m (24’ x 20’) £7,145 9.1m x 6.1m (30’ x 20’) £8,395 10.9m x 6.1m (36’ x 20’) £9,645

7.3m (24’) Wide 7.3m x 7.3m (24’ x 24’) £7,845 9.1m x 7.3m (30’ x 24’) £8,995 10.9m x 7.3m (36’ x 24’) £10,245

Pavillions include 1.2m (4’) verandah

Why not increase the size of your verandah to 1.8m (6’) on any pavilion andinfi ll panels, handrails, newel posts and spindles are available for all our Gazebos

Pric

e Li

st: G

arde

n Bu

ildin

gs

Wall Construction

Wall Cladding

Wall Lining

Roof Construction

Doors

Windows

Height

Interiors

Guttering

Floors

Timber Treatment

Electronics

Exteriors

Speci� cations & Prices: Offi ces

Walls are built with 125mm x 50mm (5” x 2”) timber framing at 450mm (16”) centres, and are diagonally braced.

Selected high quality Shiplap, Weatherboard or Loglap, pressure impregnated Tanalith E™ to ensure a long maintenance free life. Cedar is available as an option. All boarding is � xed with rust resisting nails.

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade is placed between the studwork and cladding. Walls are then insulated with Rockwool or Cellotex.

A trussed roof designed by a specialist roof company to comply with Building Regulations will be � tted. The roof space will be fully insulated with Rockwool or Cellotex. Choices of roof � nishes are available and include clay or slate tiles, cedar shingles, or felt tiles.

A range of hardwood or softwood, entrance, patio or French doors are available. A selection can be found on page 44 of our brochure. For other options please discuss your requirements with us.

We are able to o� er an extensive range of double glazed casement windows. Please discuss your requirements with us.

To eaves 2337mm (7’8”).The overall height of the building will vary depending on the pitch of roof.

Interiors are either dry lined or conventionally plastered and decorated to a colour of your choice. Skirtings, architraves and window sills are all included.

Black 100mm (4”) half round guttering and down pipes are � tted.

Floors are manufactured using 200mm x 50mm (8” x 2”) timbers, fully insulated with 150mm (6”) of insulation and boarded with 22mm (⅞”) tongue and grooved � oor board.

All timber is pressure treated with Tanalith™ E excluding purlins, joinery grade doors and windows.

All electrical works are carried out to the highest standard and include a generous amount of sockets and lights.

The exterior can be stained to a colour of your choice.

Bespoke O� ce Buildings

All Offi ces are built to your own bespoke specifi cations Please call us on 01233 611123 to discuss your requirements and we can send you a quotation.

14 | Quality Assured Manufacturing First Class Service Outstanding Value

Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our speci� cations without notice. All prices are subject to VAT. All prices include assembly. For delivery costs see page 19.

Georgian Style 6 Panel Fixed 475 x 1011mm (19” x 40”) £608 Panel Fixed 475 x 1330mm (19” x 52”) £759 Panel Fixed 685 x 1011mm (27” x 40”) £8512 Panel Fixed 685 x 1330mm (27” x 52”) £1256 Panel Opening 475 x 1011mm (19” x 40”) £1009 Panel Opening 685 x 1011mm (27” x 40”) £125

Single Pane Style1 Opening 502 x 662mm (20” x 26”) £551 Fixed & 1 Opening 980 x 662mm (39” x 26”) £752 Fixed & 1 Opening 1460 x 662mm (58” x 26”) £1003 Fixed & 1 Opening 1935 x 662mm (76” x 26”) £125

Georgian Style

Casement Windows Single Glazed

External Casement Doors

Softwood Tongue and Grooved Door Inward opening complete with frame, Yale lock, brass cylinder pull and door � ttings. 838mm x 1981mm (2’9”x 6’6”) £175Outward opening complete with frame, 5 lever morticed lock, brass handle and door � ttings. 838mm x 1981mm (2’9”x 6’6”) £185

1 Pane Hardwood Stable Door Inward opening complete with frame, Yale lock, brass cylinder pull, 14mm double glazing and door � ttings. 838mm x 1981mm (2’9”x 6’6”) £475

6 Pane Softwood Door 6 pane with timber lower section, inward opening, complete with frame, Yale lock, brass cylinder pull,14mm double glazing and door � ttings. 838mm x 1981mm (2’9”x 6’6”) £315

2 Pane Softwood French Double Doors Outward opening complete with frame, 5 lever morticed lock, door � ttings and toughened safety glass. 1106mm x 1981mm (3’10”x 6’6”) £425

Side Light to Accompany the above French Doors 2 x � xed sidelights complete with frame and toughened safety glass to increase overall size to: 2494mm x 1981mm (8’2”x 6’6”) £550

Georgian Style1 Opening 631 x 1050mm (25” x 41”) £22514mm glazing to suit £1051 Opening & 1 Vent 915 x 1050mm (36” x 41”) £34514mm glazing to suit £1051 Fixed & 1 Opening 1200 x 1050mm (47” x 41”) £35514mm glazing to suit £2151 Fixed, 1 Opening, 1 Vent 1200 x 1050mm (47” x 41”) £38514mm glazing to suit £215

Vent Style1 Fixed & Vent 631 x 1050mm (25” x 41”) £12514mm glazing to suit £501 Fixed, 1 Opening, 1 Vent 915 x 1050mm (36” x 41”) £19514mm glazing to suit £651 Fixed & 1 Vent 1200 x 1050mm (47” x 41”) £17514mm glazing to suit £751 Fixed, 1 Opening, 1 Vent 1200 x 1050mm (47” x 41”) £19914mm glazing to suit £751 Opening 375 x 1225mm (14” x 48”) £19514mm glazing to suit £251 Fixed, 2 Opening, 1 Vent 1769 x 1050mm (70” x 41”) £29514mm glazing to suit £115

Casement Style1 Opening 631 x 1050mm (25” x 41”) £12514mm glazing to suit £351 Fixed & 1 Opening 915 x 1050mm (36” x 41”) £16514mm glazing to suit £502 Opening 915 x 1050mm (36” x 41”) £21514mm glazing to suit £501 Fixed & 1 Opening 1200 x 1050mm (47” x 41”) £19514mm glazing to suit £651 Fixed & 2 Opening 1342 x 1050mm (70” x 41”) £23514mm glazing to suit £751 Fixed & 2 Opening 1769 x 1 050mm (70” x 41”) £26514mm glazing to suit £95

Georgian Style

Casement Windows Double Glazed

Opt

iona

l Ext

ras

& A

cces

sorie

s

Doors & Windows

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 15

Pric

e Li

st: O

ptio

ns &

Acc

esso

ries

Understanding Window Formats...A Fixed Window B Opening Window C Vent Window

AB B

C

Conversion from metric mm to imperial inches are approximate

20 Pane Softwood French Double Doors Outward opening complete with frame, 5 lever morticed lock, door � ttings and14mm double glazing 1106mm x 1981mm (3’10”x 6’6”) £545

Side Light to Accompany the above French Doors 2 x � xed sidelights complete with frame and toughened safety glass to increase overall size to: 2494mm x 1981mm (8’2”x 6’6”) £665

Cottage Style Hardwood French Doors Outward opening complete frame, toughened glass, 5 point locking, brass e� ect handles, security hinge bolts, shoot bolts and trickle vents. 1200mm x 2100mm (4”x 7”) £1195 1500mm x 2100mm (5”x 7”) £1450 1800mm x 2100mm (6”x 7”) £1645

20 Pane Softwood French Double Doors

External Casement Doors

Please Note: Joinery grade windows and doors will need treating with a recognised propriety stain or paint � nish.

Options & Accessories: Equestrian

Windows6 blade louvre with metal safety grille £1952 bladed louvre with � xed lower section and metal safety grille £160

Mobile SheltersFront In� l Panel 2.1m (7’) complete with door £325Dividing panel 3.0m (10’) £105Dividing panel 3.6m (12’) £125Metal Gate 2.1m (7’) galvanised metal gate £135Upgrade to Chart speci� cation POA

16 | Quality Assured Manufacturing First Class Service Outstanding Value

Ironmongery Internal Talk 1162mm x 864mm (45 3/4” x 34”) £72.50Grilles 1727mm x 864mm (67 3/4” x 34”) £105 3499mm x 864mm (137 3/4” x 34”) £137

Anti-Weaver 890mm (w) x 610mm (h) (35” x 24”) £55Grilles 1040mm (w) x 760mm (h) (41” x 30”) £71.50 1170mm (w) x 760mm (h) (46” x 30”) £82.50

Anti-Weaver Small to suit 610mm (24”) £38.50In� l Panels Medium to suit 1040mm (41”) £49.50 Large to suit 1170mm (46”) £52.50

Door Grilles 890mm (w) x 610mm (h) (35” x 24”) £55 1040mm (w) x 760mm (h) (41” x 30”) £71.50 1170mm (w) x 760mm (h) (46” x 30”) £82.50

Swivel Swivel feeder to Delux internal partitions £82.50Feeders Swivel feeder to Superior internal partitions £105

Doors - including galvanised � ttingsClipper lower stable door £100Clipper top door £50Chart lower door £145Chart top door £60Chester lower door £165Chester top door £75Chester door frame with chew strips £125Tack Room door 760mm (w) (30”) £95(Clipper / Chart) 914mm (w) (36”) £105 1200mm (w) (48”) £125Tack Room door 914mm (w) (36”) £175(Chester) 1200mm (w) (48”) £205Double doors 2285mm (w) (7’6”) £215(Includes frame) 2440mm (w) (8’) £285 3050mm (w) (10’) £390Sliding doors 1200mm (w) (4’) £395(Complete) 2400mm (w) (8’) POA 3000mm (w) (10’) POA

WindowsIronmongeryRoo� ng OptionsColoured Onduline roof sheets (per m2) £4.40Clear Onduline roof sheet £45Board / batten and Onduline roof (per m2) £10.50Felt roof (per m2) £9.50Felt tiled roof (per m2) £27.50Cedar shingles, clay / slate tiled roofs POAIncrease overhang from 1.2m (4’) to 1.8m (6’) including support posts and curved bracing (on the Chester range only) POA

LiningClipper / Chart - Lined overhang per 3.6m (12’) run £67.50Line Tack Room ceilings at eaves height POAClipper / Chart - Line 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) V313 to eaves £195Chester - Line 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) Plyboard to eaves £295Clipper / Chart - Upgrade 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) Plyboard to 2.1m (4’) £130Clipper / Chart - Upgrade 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) Plyboard to eaves £265Clipper / Chart - Line Tack Room 1.8m x 3.6m (6’ x 12’) with 18mm (3/4”) V313 to eaves £240Clipper / Chart - Line Tack Room 2.4m x 3.6m (8’ x 12’) with 18mm (3/4”) V313 to eaves £275Clipper / Chart - Line Tack Room 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) V313 to eaves £330Chester - Line Tack Room 1.8m x 3.6m (6’ x 12’) with 18mm (3/4”) Plyboard to eaves £385Chester - Line Tack Room 2.4m x 3.6m (8’ x 12’) with 18mm (3/4”) Plyboard to eaves £460Chester - Line Tack Room 3.6m x 3.6m (12’ x 12’) with 18mm (3/4”) Plyboard to eaves £575

Guttering100mm (4”) 1/2 round, black per metre run £13.75

Equestrian Buildings - Optional Extras

Saddle Rack Available in Red or Black £7.45Folding Saddle Rack Available in Red or Green £16.25Hook Over Manger £8.25Corner Manger Available in Red, Blue or Black £18.25Corner Manger Frame £7.753 Gallon Flat Sided Bucket £14.95Bucket Holder Heavy Duty Wall Fix £18.95Bucket Holder Heavy Duty Hook Over £22.95Salt Lick Holder Available in Red or Black £16.25Manure Collector £9.25Manure Rake £5.95Plastic Shovel £19.95Plastic Feed Scoop Available in Red, Blue or Green £4.95Broughton Stable Mats 1850mm x 1200mm x 17mm (6’ x 4’ x 3/4”) POABroughton Trailer Mats 1850mm x 1200mm x 10mm (6’ x 4’ x 1/4”) POAEva Wall Boards 1830mm x 1200mm x 12mm (6’ x 4’ x 1/2”) POA1830mm x 1200mm x 16mm (6’ x 4’ x 3/4”) POA

Stable Accessories

See page 19 for Ironmongery and Delivery rates

Plan

ning

Grid

Planning Grid

Additional InformationName ...........................................................................................................................................................................................................................................................................................................................................

Address .................................................................................................................................................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................................................................................................................................

Post Code ....................................................................................................................... Email ...............................................................................................................................................................

Tel ................................................................................................................................................................... Fax ...............................................................................................................................................................

✁

Additional InformationName ...........................................................................................................................................................................................................................................................................................................................................

Address .................................................................................................................................................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................................................................................................................................

Post Code ....................................................................................................................... Email ...............................................................................................................................................................

Tel ................................................................................................................................................................... Fax ...............................................................................................................................................................

Planning Grid

✁

Opt

iona

l Ext

ras

& A

cces

sorie

s

01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 19 01233 611 123 www.chartstables.co.uk enquiries@chartstables.co.uk | 19

Strong Tee Hinge 450mm (18”) - per pair £4.99Strong Tee Hinge 600mm (24”) - per pair £8.25Heavy Reversible Hinges 500mm (20”) - per pair £18.95Heavy Reversible Hinges 600mm (24”) - per pair £24.95Monkey Tail Bolt 450mm (18”) £9.95Kick Over Latch 240mm (91/2”) £7.45Pad Bolt with elongated keep 200mm (85/8”) £5.45Autolock Animal Bolt 230mm (9”) £9.25Tower Bolt 150mm (6”) £1.45Garage Door Bolt 450mm (18”) £8.55Cast Cabin Hook 100mm (4”) £2.95Cast Cabin Hook 150mm (6”) £4.25Slip Rail Bracket 100mm 50mm (4” x 2”) £7.45Ring on Plate 50mm x 50mm (2” x 2”) £3.45Ring on Eye Bolt 75mm x 200mm (3” x 8”) £3.45Bucket Clip £2.95Hook on Plate £2.55Staple on Plate £2.25Heavy Duty Wall Rack 500mm (h) x 760mm (w) x 420mm (d) (20” x 30” x 16”) £62.50Heavy Duty Corner Rack 630mm (h) x 860mm (w) x 530mm (d) (25” x 34” x 21”) £55

Garages - Optional Extras

Strong Tee Hinge 450mm (18”) - per pair £4.99

Ironmongery

Roo� ng OptionsColoured Onduline roof sheets (per m2) £4.40Clear Onduline roof sheet £45Board / batten and Onduline roof (per m2) (Workshops only) £10.50Felt roof (per m2) for Garages £6.40Felt roof (per m2) for Workshops £9.50Felt tiled roof (per m2) for Garages £22.00Felt tiled roof (per m2) for Workshops £27.50Cedar shingles, clay / slate tiled roofs POA

LiningTo walls with 18mm (3/4”) V313 (per m2) £10.45To walls with 6mm (¼”) Plywood (per m2) £6.85To walls with 18mm (3/4”) Plywood (per m2) £17.60To ceiling at eaves height £10.45

InsulationTo walls with Rockwool (per m2) £7.45To ceiling at eaves height (per m2) POA

DoorsSingle Door 760mm (w) (30”) £95 914mm (w) (36”) £105 1200mm (w) (48”) £125Double doors 2285mm (w) (7’6”) £235(Includes frame) 2440mm (w) (8’) £255 3050mm (w) (10’) £345

FloorsT&G 22mm (7/8”) (per m2) £30V313 18mm (3/4”) (per m2) £17V313 18mm (3/4”) with insulation (per m2) £35

HeightIncrease eaves height to 2.4m (8’) - Garages POAIncrease eaves height to 2.7m (9’) - Carriage Houses POA

Delivery Charges

Avon £200Bedfordshire £135Berkshire £100Buckinghamshire £110Cambridgeshire £155Channel Islands POACheshire £275Clywd £320Cornwall £440Cumbria £550Derbyshire £220Devon £220Dorset £180Dyfed £350Essex £90Glamorgan - Mid / South £210Glamorgan - West £275Gloucestershire £180Gwent £180Gwynedd £430Hampshire £110Herefordshire £210Hertfordshire £90Humberside £390

Isle of Wight POAKent FREELancashire £500Leicestershire £180Lincolnshire £210Middlesex £90Norfolk £200Northamptonshire £160Northumberland £550Nottinghamshire £200Oxfordshire £135Powys £275Shropshire £210Somerset £210Sta� ordshire £210Su� olk £160Surrey FREESussex - East FREESussex - West £70Warwickshire £180Wiltshire £160Worcestershire £180Yorshire - South £310Yorkshire - North £390

Pric

e Li

st: O

ptio

ns &

Acc

esso

ries

See pages 42-47 of the brochure for optional extras, Ironmongery and Accessories

Des

igne

d an

d Pr

oduc

ed b

y Th

e D

etec

tive

Age

ncy

Ltd.

Te

l: 01

424

7747

71

ww

w.d

etec

tive.

co.u

k

www.chartstables.co.uk

Phone: 01233 611 123

Fax: 01233 645142

Email: enquiries@chartstables.co.uk

Chart House, Dencora Way, Ashford, Kent TN23 4FH

In accordance with our policy of continuous development, we reserve the right to change specifications and prices without notice. E&OE.