Comm_Catalog_10_22

1 1.800.322.9146

LEIT XRC-ETF Ambient Powered Irrigation Controller with Flow and ET Sensing CapabilityThe LEIT XRC-ETF is a new generation of ambient light irrigation controller. The LEIT XRC-ETF uses a new technology (patent pending) to send and receive information via existing solenoid wires. The LEIT XRC-ETF’s new and advanced features allow independent flow sensing capability for each valve including master valve, and soil sensor connections on any valve. The new controller also has wireless ET capability and a USB port to upload new software.

a. The controller is able to learn and store the flow rate information for each valve. The user can set a minimum and maximum flow deviation per valve as a percentage of nominal flow, which can be used for system override.

b. Flow velocity is measured, and this information together with pipe size allows flow volume (GPM/m3/h) to be provided by the controller for each valve.

c. Flow rate, velocity and volume information can be reviewed in the controller’s Status Report. The current day, month, previous months and the entire year’s information are available in the History Report.

d. The LEIT XRC-ETF can read moisture sensors at any valve location which does not have a rain sensor (SKIT). The LEIT XRC-ETF can read Irrometer sensors without a special interface kit and Decagon sensors with a dedicated interface kit. These sensors are powered by the LEIT XRC-ETF and do not require a separate powered controller.

LEIT-ET-WWS Wireless Weather Station DIG LEIT-WWS wireless weather station is designed to be used with the LEIT-2ET and the LEIT XRC-ETF ambient powered controllers. DIG LEIT-WWS is a wireless weather station that uses ambient light and can operate in all weather conditions. The LEIT-ET wireless weather station can be mounted on a column and after installation the weather station starts sending information to any LEIT-2 or LEIT XRC-ETF within a distance of up to 300’ (100 m) line of sight. The LEIT-2ET and the LEIT XRC-ETF can receive information from up to 5 LEIT-ET wireless weather stations using the same radio frequency.

• TheLEIT-ETwirelessweatherstationcangaugerainfallamount,humiditylevel,temperature,windspeed and solar radiation.• HistoryReportcanprovideamonthlyanddailyaverageofrainfall,temperatureandhumidity.

LEIT-2ET, ET Ambient Powered ControllerThe LEIT–2-ET can receive information from the wireless weather station. Utilizing the information received along with the user information inputted, the controller can adjust the irrigation program schedule for each valve to provide more precise amounts of irrigation based on current microclimate.

FSKIT 8800 Flow SensorDIG’s FSKIT 8800 flow sensors can be used with the LEIT XRC-ETF system and are capable of measuring water flow rates without using external power. A simple connection to the existing solenoid wires is all that is required. The low power, paddle wheel sensors are available in ¾”, 1”, 11/2” and 2” with 1-120 GPM and calibrated to 5% FSD.

company statement

new products

Vision:Intelligent Irrigation Solutions

mission:DIG is defined by our commitment to our customers. We strive to exceed customer expectations by embracing continuous improvement throughout our organization.

Values:DIG is dedicated to the research and development of quality, environmentally conscious irrigation products that support our customers’ needs.

We are committed to our customers’ success and to helping them achieve their goals.We will proactively develop products of the highest quality in an effort to satisfy global customer needs.We will constantly strive to develop products that use the earth’s resources wisely.We will continue to engage in educational opportunities for our customers and employees.We place a high value on integrity and will communicate openly and honestly with our customers and employees.

www.digcorp.com 2

taBle oF contents

multiple outlet emitters

12-outlet emitters and accessories ……………………… 4

6-outlet emitters …………………………………………… 5

4-outlet emitters …………………………………………… 6

sinGle outlet drip emitters

Single outlet pressure compensating emitters …………… 6

Button, adjustable and flag emitters ……………………… 7

dripline

Micro-line™ 1/4” non-PC dripline ………………………… 8

Excel™ pressure compensating dripline…………………… 9

Excel™ pressure compensating dripline

with check valve ……………………………………… 10

micro sprinklers, FoGGers and spray Jets

Jet sprayers ……………………………………………… 11

A-Jet sprinklers …………………………………………… 11

Adjustable spray jet ……………………………………… 11

EXL series fogger ………………………………………… 12

Mist sprayers ……………………………………………… 12

8” and 12” pop-up micro sprayers ………………………… 13

Fan spray jet ……………………………………………… 13

drip system components

Air relief, flush and shut off valves ………………………… 14

Drip zone assembly ……………………………………… 15

Adjustable pressure regulators …………………………… 16

Preset pressure regulators ………………………………… 16

Filters

3/4” and 1” plastic screen filters …………………………… 17

3/4” and 1” plastic disc filters ……………………………… 18

1 1/2” and 2” plastic screen filters ………………………… 19

1 1/2” and 2” plastic disc filters …………………………… 20

poly and distriBution tuBinG

1/8”, 1/4”, 1/2”, 3/4” and 1” tubing ………………………… 21

FittinGs

Compression fittings ……………………………………… 22

Universal 1/2” nut lock fittings …………………………… 22

1/2” and 1/4” barb fittings ………………………………… 23

accessories

1/4” in-line shut off valve ………………………………… 24

Shrub adapter ……………………………………………… 24

Punches …………………………………………………… 24

Hose end and goof plugs ………………………………… 24

PVC inserts ………………………………………………… 24

accessories cont.

Threaded fittings ………………………………………… 24

Stakes, semi rigid risers and stake assembly ……………… 25

Pop-up riser assembly …………………………………… 25

swiVel FittinGs

3/4-2” swivel fittings for manifold assembly ……………… 26

ac controllers and ValVes

Four and six station irrigation

and propagation controllers …………………………… 27

Valve assembly with swivel fittings ……………………… 27

3/4-2” plastic in-line valves ………………………………… 28

Battery operated controllers & ValVes

Model 9001 hose end irrigation timer ……………………… 29

Two-wire single and four station

battery operated controller …………………………… 30

Two-wire single station battery operated controller

with in-line valve and actuator ………………………… 31

Single station with 3/4-2” in-line valve …………………… 34

Single station with actuator for

3/4” and 1” anti-siphon valve ………………………… 34

Single station propagation and irrigation controller

with solenoid or in-line valve …………………………… 35

Conversion adapters ……………………………………… 35

Four and six station battery

operated controllers …………………………………… 36

DC solenoid with in-line valve ……………………………… 36

uniVersal dc solenoid and ValVes

Two-wire universal DC valve and actuator ………………… 32

Two-wire S-305DC solenoid ……………………………… 33

leit controllers and accessories

LEIT-2 system ……………………………………………… 37

LEIT RC2 remote control handset ………………………… 38

LEIT 4000 four, six, and eight station

standard series ………………………………………… 39

LEIT X 10-28 stations ……………………………………… 40

LEIT XRC controller ………………………………………… 41

LEIT Link two-way remote control handset ………………… 42

LEMA 160HE valves ……………………………………… 43

LEMA 1600HE solenoid …………………………………… 44

LEIT accessories ……………………………………… 45-46

charts and warranty

Headloss charts …………………………………………… 47

Charts and formulas ……………………………………… 48

DIG warranty ……………………………………………… 49

swiVel maniFold FittinGs• Quickandeasyassemblyanddisassembly• Notoolsrequired–easilytightenedbyhand• O-ringtopreventleaks• Nocutting,measuringorgluing

diG Family oF products

leit controllers • Ambientlightpoweredirrigationcontrollers• Operatedayandnightinallweatherconditions• Dependable,reliable,rugged• Provideirrigationcontrolsolutionsotherscan’toffer• Nopowersupplyneeded–Controlupto28stations–Bilingualprogramming

Filters• Completelineofqualityscreensanddiscfiltersformostirrigationandindustrialapplications• Availablefrom3/4”to2”• Interchangeablescreen-discfeatureforallyourirrigationneeds

drip irriGation• Awiderangeofdripandmicrosprinklerproducts• Fromsingletomulti-outletpressurecompensatingdrippersanddripheads• Highquality,highimpactcompressionandbarbfittings• Adjustable,take-apartandbuttondrippersinavarietyofflowrates• Widerangeofmicrosprayers,foggers,andmicrosprinklers• Fromlowflowfoggerstolargediametermicrosprayers

Battery operated controllers & ValVes• Affordable,easytoinstallanduse• Canbeusedwithmostbrandnamevalves• Availablewith3/4to2”in-lineglobevalve• Waterproofconstruction;canbeusedaboveorbelowgrade• Digitaldisplaywithsimplefourbuttonforeasyprogramming

tuBinG• Allsizesareavailableinawiderangeofcoilconfigurations• 1/8”to1/4”vinylandpolyethylenedistributiontubing• 1/2”to1”polyethylenetubing• Madeoflow-densitypolyethyleneusingUnionCarbide/Dow7510Fingerprint™• Extrudedinourfacilitytothehighestmanufacturingstandardsforqualityyoucancounton• Pressurecompensatingdriplinein16and17mmwithorwithoutcheckvalve• 1/4”microdriplineinavarietyofspacingsandcoilsizes

3 1.800.322.9146

www.digcorp.com 4


Emitter Conditions During Self Flushing Mode

0-3 PSI 3-8 PSI 8-80 PSIThe TOP concept consists of self-cleaning pressure compensating emitters. Their ability to compensate for pressure fluctuations between 8-80 PSI is achieved through the utilization of a silicone diaphragm and the water passage design. The self flushing function works between 0-8 PSI, and is achieved as follows:

At 0-3 PSI the flow is relatively high and the emitter is in flushing mode while the diaphragm is completely open. As the pressure increases between 3-8 PSI, the diaphragm slowly begins to close. Flow is still high, but steadily decreasing. The diaphragm is closed between 8-80 PSI, and the flow is constant.

Opening and closing the system will bring the TOP to a flushing mode.

ORDERING INFORMATION Model Description Color TOP-000 Manifoldonly TOP-005 .6GPH per zone black TOP-010 1GPH per zone red TOP-020 2.2GPHperzone green TOP-030 3.3GPHperzone purple TOP-100 KITwith1GPHperzone red TOP-300 KITwith3.3GPHperzone purple

top 12-outlet drip emitter

TheTOPconceptisdesignedforfirst time installations or retrofitting an existing sprinkler riser into an efficient 12-outlet drip irrigation system.TheTOPconceptutilizesunique self-cleaning, pressure compensating emitters enabling long runs with even water distribution from all outlets.

Features:

• 12individuallypressurecompensating,selfflushing emitters allow easy passage of water and minimize clogging

• Flowrates:.6,1,2.2and3.3GPH (2.2, 4, 8.3 and 12.5 l/h)

• Pressurecompensatingrange: 8-80PSI(.5-5.6BAR)

• Interchangeableemittersforvariableflowratesin a single head

• Color-codedemittersandbarbseasilyidentifyflow rate at each zone

• Eachemitterindividuallyfiltered(approximately80 Mesh)

• Backupmini-diskfilter

• Ruggedmaterialstowithstandthemostadverse conditions

• Installabovegradeorplacebelowgradeina6”emitterbox

• Inletplugsprovideclosureoptionsforuptoeight emitters

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80

4

3.5

3

2.5

2

1.5

1

0.5

0

FLO

W R

ATE

(GP

H)

PRESSURE (PSI)

PERFORMANcETOTAl FlOw RATE PER DRIP hEAD

Number of FlOw RATE IN GPM drip heads 0.6 BLACK 1 RED 2.2 GREEn 3.3 PuRPLE 1 0.12 0.2 0.44 0.66 5 0.6 1 2.2 3.3 10 1.2 2 4.4 6.6 15 1.8 3 6.6 9.9 20 2.4 4 8.8 13.2 25 3 5 11 16.5 30 3.6 6 13.2 35 4.2 7 15.4 40 4.8 8 45 5.4 9 50 6 10

Materials:

• BodyandCover:HighImpactPlastic

• Filter:Nylon

• Diaphragm:Silicon

Dimensions:

• Dimensions:3”Wx2”H (7.6cmWx5cmH)

Flow rate Vs. pressure

speciFications:• FlowRates:.6-33GPH(2.2-12.5l/h)• OperatingPressure:15-50PSI(1-3BAR)• InletSize:1/2”FNPT• Usewith1/8”(.187OD)or 1/4”(.150-.160ID)DistributionTubing• TOPKitsContain100’of1/8”Distribution Tubing, Accessories and Stakes ° 1/4” Converter Elbow and Barb Allow The Use of 1/4” Distribution Tubing• FilterRequirement:120Mesh

5 1.800.322.9146


ORDERING INFORMATION Model Description Color 06-504 4.5 GPH with side outlet green 06-506 5.5 GPH with side outlet black 06-508 8.2 GPH with side outlet blue 06-510 9.7 GPH with side outlet brown

ORDERING INFORMATION Model Description Color 06-604 4.5 GPH with barb outlet green 06-606 5.5 GPH with barb outlet black 06-608 8.2 GPH with barb outlet blue 06-610 9.7 GPH with barb outlet brown

ORDERING INFORMATION Model Description 06-620 Adjustable flow with barb outlet and 0-20 GPH per outlet

6-outlet pc drip emitter/BuBBler

DIG’s 6-outlet high flow drip bubblers have individual flow-regulating emission devices, enabling long runs with even water flow throughout all the outlets at a wide range of water pressures. Available in two configurations and four flow rates.

Features:

• Pressurecompensatingrange:15-60PSI (1.2-4.6BAR)

• Largewaterpassageswithrollingdiaphragmsallow for debris to pass through without clogging

• Individualflow-regulateddevicesforeachoutlet

• Ruggedmaterialstowithstandadverseconditions

• Installabovegradeorplacebelowgradeina6”emitterbox

• Availablewithbottommountedsideoutletsorbarb outlets to hold 1/4” distribution tubing

• Colorcodedbodyforeasyidentification Materials:

• BodyandCovers:HighImpactPlastic

• FlowRegulatingDevice:PBT

• Diaphragms:Silicon

• BarbOutlets:Acetal

Dimensions:

• 2.25”Wx1.5”H (57 mm W x 38 mm H)

PERFORMANcETOTAl FlOw RATE PER DRIP hEAD

Number of Flow per outlet Flow per outlet drip heads 4.5 GPH 0.7 GPM 5.5 GPH 0.9 GPM 1 27 0.45 33 0.55 5 135 2.25 165 2.75 10 270 4.50 330 5.50 15 405 6.75 495 8.25 20 540 9.00 660 11.0

Number of Flow per outlet Flow per outlet drip heads 8.2 GPH 0.13 GPM 9.7 GPH 0.16 GPM 1 49.2 0.82 58.2 0.97 5 246 4.93 291 4.85 10 492 8.20 582 9.7 15 738 12.3 873 14.5 20 984 16.4 1164 19.4

6-outlet adJustaBledrip emitter/BuBBler

The 6-outlet adjustable drip emitter is a high flow emission device with 6 outlets that have adjustable flow between 0-20 GPH (0-75 l/h). It is available with barbed outlets that swivel so the flow dial tucks under the head after installation. This system is designed for retrofit installations above or below grade.

Features:

•Swivelbarboutletsallowinstallationflexibilityand protection of the flow control

•Madeofruggedmaterialstowithstandadverseconditions

•Canbeinstalledaboveorbelowgradeina6”(15 cm) emitter box

speciFications:• FlowRateisAdjustableBetween0-20GPH (0-75 l/h) Per Each Outlet• OperatingPressure:Upto50PSI(3.5BAR)•Usedwith4mm(.150-.160ID) Distribution Tubing•InletSide:1/2”FemaleThread•FilterRequirement:80Mesh

0 5 10 15 20 25 30 35 40 45 50 55 60 65

8

9

7

6

10

5

4

3

2

1

0

FLO

W R

ATE

(GP

H)

PRESSURE (PSI)


speciFications:• FlowRates:4.5,5.5,8.2,and9.7GPH (17,20.8,31and36.8l/h)• OperatingPressure:15-50PSI (1-3.5 BAR)• InletSize:1/2”FNPT• OutletSize:1/4”BarbandBarbedElbow• Usewith1/4”(.150-.160” ID) Distribution Tubing • FilterRequirement:120Mesh

www.digcorp.com 6

multiple and sinGle outlet drip emitters

4-outlet drip/BuBBlers

Convert a 1/2” sprinkler riser into an efficient 4-outlet bubbler system.

Features

• Pressurecompensatingrange:10-60PSI(.7-4.2 BAR)

• Colorcodedoutletbarbmayberemovedandreplaced to change flow rates

• Usedwith1/4”(.150-.160ID)distributiontubing

• Builtinscreenfilterandlargewaterpassagetoprevent clogging

ORDERING INFORMATION Model Description Color 06-042 2GPH1/2”FNPTemitterbubbler blue 06-043 6GPH1/2”FNPTemitterbubbler black 06-044 12GPH1/2”FNPTemitterbubbler red 06-045 20GPH1/2”FNPTemitterbubbler green

ORDERING INFORMATION Model Description Color 06-014 1 GPH button dripper black 06-015 2 GPH button dripper green 06-016 4 GPH button dripper red

pressurecompensatinGemitters

DIG drip emitters come in a wide variety, including single outlet pressure compensating emitters, flag and adjustable emitters. The 4-outlet pressure compensating emitter is available in 2, 6, 12 and 20 GPH. DIG drip emitters are available on barbs, stakes or 1/2” threaded bases.

Features

• Pressurecompensatingrange:10-50PSI (.7-3.5 BAR)

• Uniformflowrate

• Colorcodedflowrates

• Largewaterpassagetoreduceclogging

• ConstructedofUV-resistantplasticmaterial

• Pressurecompensationenablestheuseof longer laterals with smaller diameter distribution tubing

speciFications• FlowRatesandColorCodes: ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green °4GPH(16l/h)ColorCode–Red• OperatingPressure:10-45PSI(.7-3.1BAR)• AvailablewithBarbor1/2”FNPT• FilterRequirement:155Mesh

Materials

• Body&Cover:Polypropylene

• Diaphragm:Silicone

Materials

• Body:ABS

• Diaphragm:EPDM

speciFications:• FlowRates: 2-20GPH(7.6-76l/h)• OperatingPressure: 10-50 PSI (.7-3.5 BAR) • 1/2”FNPT• FilterRequirement:120Mesh

5

4

3

2

1

10 15 20 30 40 50 60

PRESSURE (PSI)

FLO

W R

ATE

(GP

H)


7 1.800.322.9146

speciFications• FlowRatesandColorCodes: Adjustable from 0-10 GPH (0-38 l/h) Color Code – Black• OperatingPressure:10-30PSI(.7-2BAR)• Availableon1/4”Barbor 5” (12.7 cm) Stake with Barb• EightStreamsfora360°Coverage• FilterRequirement:155Mesh

sinGle outlet drip emitters

adJustaBle dripemitters

Features

• Canbetakenapartforeasycleaning

• Clickadjustmentfromflowoff to full flow – perfect as the plant grows and its need for water changes

• UVstabilizedmaterialforlonglife

PERFORMANcE Pressure Flow Throw (PSI) (GPH) Dia. (ft) Fully open 15 8.7 1.2 (approx. 20 10.3 1.9 22 clicks) 30 13.0 3.0

ORDERING INFORMATION Model Description Color 06-011 0-10 GPH on barb black 06-012 0-10 GPH on stake black

FlaG drip emitters

Features

• Selftappingbarbinlet for easy installation

• Outletbarbforusewith1/4”(.150-.160ID)distribution tubing

• Twistopentopwithlockforsecureoperationunder pressure, easy cleaning (with locking feature)

• Durablehighimpactplastic

speciFications:• FlowRatesandColorCodes: ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green ° 4 GPH (12 l/h) Color Code – Red• OperatingPressure: 10-20 PSI (.7-1.4 BAR)• FilterRequirement:155Mesh

ORDERING INFORMATIONModel Description Color06-009 1 GPH with 1/4” barb black06-010 2 GPH with 1/4” barb green06-007 4 GPH with 1/4” barb red

Button drip emitters

Features

• Uniquedesignwithaminimumwidthpassageof 0.043” provides a turbulent flow

• Uniformflowrate

• Constructedofhigh-qualitymaterialtoensurestability and long life

speciFications:• FlowRatesandColorCodes: ° .5 GPH (2 l/h) Color Code – Brown ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green• OperatingPressure: 10-20 PSI (.7-1.4 BAR)• Availableon1/4”Barb• FilterRequirement:155Mesh

Materials

• Body:Polypropylene

ORDERING INFORMATIONModel Description Color06-019 .5 GPH brown06-020 1 GPH black06-021 2 GPH green

MAxIMuM REcOMMENDED 1/2” POlyEThylENE TubING lENGTh (FT)

Emitter .5 GPH brown 1 GPH black 2 GPH greenSpacing Pipe ID .600 Pipe ID .600 Pipe ID .600 12” 197’ 140’ 80’ 24” 329’ 236’ 140’ 36” 439’ 314’ 180’ 48” 525’ 350’ 236’

2 4 6 8 10 12 14 16

12 10

8

6

4

2

30

2015

NUMBER OF CLICKS

FLO

W R

ATE

(GP

H)


4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

15 20 25PRESSURE (PSI)

FLO

W R

ATE

(GP

H)


www.digcorp.com 8

micro-line ™

Materials:• LinerLow-DensityPolyethylene

ORDERING INFORMATION Model Description Color ML-106 100’ (30 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-109 100’ (30 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-112 100’ (30 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-106B 100’ (30 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-109B 100’ (30 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-112B 100’ (30 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-506 500’ (150 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-509 500’ (150 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-512 500’ (150 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-506B 500’ (150 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-509B 500’ (150 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-512B 500’ (150 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown

ORDERING INFORMATION Model Description Color ML-1006 1000’ (300 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-1009 1000’ (300 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-1012 1000’ (300 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-1006B 1000’ (300 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-1009B 1000’ (300 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-1012B 1000’ (300 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD brown ML-3006 3000’ (900 m), 6” (15 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-3009 3000’ (900 m), 9” (22.8 cm) spacing, .58GPH(2l/h),.170IDx.250OD black ML-3012 3000’ (900 m), 12” (30 cm) spacing, .58GPH(2l/h),.170IDx.250OD black

micro-linetm 1/4”non-pc dripline

The micro line dripline is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The in-line dripper is built with a large filter along the cross section of the dripper to ensure that particles on the bottom of the micro tubing do not enter the labyrinth, ensuring trouble-free operation and a long life.

Features:

• Smalldiameterdriplinecanbeusedaboveorbelow grade or under mulch for a variety of applications such as containers and narrow plantings

• Smalldrippersizewithlargewaterpassagelabyrinth and turbulent flow helps reduce clogging

• Largeinletfilteralongthelengthofthedripperprevents particles from entering the line

• Twooutletsperdripperensurelesschanceofclogging

• Resistanttochemicalsandfertilizerscommonlyused in landscape applications

• Canbeusedwithany1/4”barbfittings

• Flexibletubingforeasyinstallation

• Madeoflow-density,UV-resistant, 7510 polyethylene resins with Fingerprint®

speciFications:• FlowRatesandDripperColorCode: ° .57 GPH (2.1 l/h) Color Code – Blue• OperatingPressure: 7-20 PSI (.5-1.4 BAR)• DriplineColorCode:BlackorBrown• DriplineSpacing:6”or12”(15-30cm)• DripTubingSize: 1/4” with .170 ID x .250 OD (4 mm)• MinimumBendingRadius:2’(60cm)• Availablein100’,1000’and3000’Coils• FilterRequirement:155Mesh

MIcRO lINE 1/4” NON Pc DRIPlINEMAxIMuM lATERAl lENGTh

ON FlAT TERRAIN (FEET) Dripper spacing 6” 12” 18’ 34’

PREssuRE vs. FlOw Pressure in PSI Flow in GPH 12 0.513 13 0.531 14 0.553 15 0.569 16 0.599 17 0.601 18 0.625 19 0.636 20 0.654

1.2

1.0

0.8

0.6

0.4

0.2

010 20 30 40 50

PRESSURE (PSI)

FLO

W R

ATE

(GP

H)

•


9 1.800.322.9146

pc dripline

excel™ pressurecompensatinG (pc)driplines

Excel™ series PC dripline is extruded linear low-density polyethylene dripline, containing cylindrical flow-regulated and self-flusing drip emitters inserted and welded into the wall of the polyethylene tubing in preset spacing. Both the tubing and the drip emitters are manufactured from the finest quality resins to ensure uniform emission from drip emitters year after year.

Features:

• Usedforaboveorbelowgradeinstallation

• Twoflowratestoprovidemaximumflexibilityin a variety of applications

• Flow-regulated;alldrippersdeliverequalflowin a wide range of operating pressures

• Flowuniformityregardlessofoperatingpressure and variation along the line

• Thedripperandthediaphragmareself-contained units that are molded to the interior wall of the tubing

• Turbulentflowthroughalargewaterpassageto the labyrinth helps reduce clogging

• Cloggingresistanceisduetothedesignofdripper’sfilterintakeareabeingcontinuouslyflushed by the water flow throughout the operation of the system

• Twooutletsperdripperensuresareducedchance of clogging

• Resistanttochemicalsandfertilizerscommonlyused in the landscape


• Madeoflow-density,UV-resistant,7510polyethylene resin with Finger Print™

• Thedriplineismarkedwithflowrateandsizeforeasyidentification

PERFORMANcE16 MM Pc DRIPlINE

MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 12” 18” 24” 12” 18” 24” 15 PSI 106 135 165 98 122 138 25 PSI 228 334 462 188 265 345 35 PSI 285 426 565 218 320 411 45 PSI 335 498 655 245 365 463 * Flat terrain

PERFORMANcE17 MM Pc DRIPlINE

MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 12” 18” 12” 18” 15 PSI 132 163 114 142 25 PSI 295 384 216 285 35 PSI 358 483 257 343 45 PSI 395 536 298 392 * Flat terrain

FlOw RATE PER 100 FEET Dripper flow rate .53 GPH 1 GPH Spacing GPM GPH GPM GPH 12” 0.88 53.0 1.66 100.0 18” 0.58 35.3 1.11 66.6 24” 0.44 26.5 0.83 50.0

1.2

1.1

1.0

.09

.08

.07

.06

.05

.04

.03

.02

.01

0

PRESSURE (PSI)

FLO

W R

ATE

(GP

H)

0 5 10 15 20 25 30 35 40 45 50 55 60

speciFications:• FlowRates: ° 53 GPH (2 l/h) Color Code-Orange ° 1 GPH (3.785 l/h) Color Code-Gray• OperatingPressure:12-50PSI(.8-3.5Bar)• DrippersColors:.53GPH yellow and 1 GPH white • DriplineColorCode:BlackandBrown• DriplineSpacing:12”,18”,24”and30” (30.5cm,45.7cm,60.9cmand76.2cm)• TubingSize: °1/2”,.550IDx.640OD(16mm) °1/2”,.570IDx.670OD(17mm)• MinimumBendingRadius:5’• Availablein100’,500’and1000’Coils (30m, 150m and 300 m) • FilterRequirement:155Mesh

ORDERING INFORMATIONModel Description–17mm Color A5-112P 100’,12”spacing,.53GPH,.670OD brown A5-118P 100’,18”spacing,.53GPH,.670OD brown A1-112P 100’,12”spacing,1GPH,.670OD brown A1-118P 100’,18”spacing,1GPH,.670OD brown A5-512P 500’,12”spacing,.53GPH,.670OD brown A5-518P 500’,18”spacing,.53GPH,.670OD brown A5-524P 500’,24”spacing,.53GPH,.670OD brown A1-512P 500’,12”spacing,1GPH,.670OD brown A1-518P 500’,18”spacing,1GPH,.670OD brown A1-524P 500’,24”spacing,1GPH,.670OD brown A5-12P 1000’,12”spacing,.53GPH,.670OD brown A5-18P 1000’,18”spacing,.53GPH,.670OD brown A5-24P 1000’,24”spacing,.53GPH,.670OD brown A1-12P 1000’,12”spacing,1GPH,.670OD brown A1-18P 1000’,18”spacing,1GPH,.670OD brown A1-24P 1000’,24”spacing,1GPH,.670OD brown

ORDERING INFORMATIONModel Description–16mm Color A5-112 100’,12”spacing,.5GPH,.640OD black A5-118 100’,18”spacing,.5GPH..640OD black A5-124 100’,24”spacing,.5GPH,.640OD black A1-112 100’,12”spacing,1GPH,.640OD black A1-118 100’,18”spacing,1GPH..640OD black A1-124 100’,24”spacing,1GPH,.640OD black A5-512 500’,12”spacing,0.5GPH,.640OD black A5-518 500’,18”spacing,0.5GPH,.640OD black A5-524 500’,24”spacing,0.5GPH,.640OD black A1-512 500’,12”spacing,1.0GPH,.640OD black A1-518 500’,18”spacing,1.0GPH,.640OD black A1-524 500’,24”spacing,1.0GPH,.640OD black A5-12 1000’,12”spacing,0.5GPH,.640OD black A5-18 1000’,18”spacing,0.5GPH,.640OD black A5-24 1000’,24”spacing,0.5GPH,.640OD black A1-12 1000’,12”spacing,1.0GPH,.640OD black A1-18 1000’,18”spacing,1.0GPH,.640OD black A1-24 1000’,24”spacing,1.0GPH,.640OD black A1-30 1000’,30”spacing,1.0GPH,.640OD black A1-36 1000’,36”spacing,1.0GPH,.640OD black


Materials:

•Linerlow-densitypolyethylene

www.digcorp.com 10

pc dripline

ORDERING INFORMATIONModel Description–ALL.670OD ColorA5-112P-CV 100’, 12” spacing, .53 GPH brownA5-118P-CV 100’, 18” spacing, .53 GPH brownA1-112P-CV 100’, 12” spacing, 1 GPH brownA1-118P-CV 100’, 18” spacing, 1 GPH brownA5-512P-CV 500’, 12” spacing, .53 GPH brownA5-518P-CV 500’, 18” spacing, .53 GPH brownA5-524P-CV 500’, 24” spacing, .53 GPH brownA1-512P-CV 500’, 12” spacing, 1 GPH brownA1-518P-CV 500’, 18” spacing, 1 GPH brownA1-524P-CV 500’, 24” spacing, 1 GPH brownA5-12P-CV 1000’, 12” spacing, .53 GPH brownA5-18P-CV 1000’, 18” spacing, .53 GPH brownA5-24P-CV 1000’, 24” spacing, .53 GPH brownA1-12P-CV 1000’, 12” spacing, 1 GPH brownA1-18P-CV 1000’, 18” spacing, 1 GPH brownA1-24P-CV 1000’, 24” spacing, 1 GPH brown

excel™ pressurecompensatinG (pc)driplines withcheck ValVe (cV)

Excel™ Series PC dripline is a new advance in PC dripline design. Excel Series PC dripline has self-flushing, flow-regulated inline emitters with a check valve molded into the inside wall of the tubing to help sustain an efficient irrigation system in a wide range of environments.

Features:

• Excel™SeriesCVPCdriplinecanbeinstalledabove or below grade

• Excel™SeriesCVPCdriplineisavailablewitha check valve to prevent particles and debris from entering the dripper at the end of the irrigation cycle

• Excel™SeriesCVPCdriplineinlineemittersprevent drainage from the dripline when the water has been turned off

• Availableintwoflowratestoprovidemaximum flexibility in a variety of applications

• Flow-regulated;alldrippersdeliverequalflowat a wide range of operating pressures

• Flowuniformityregardlessofoperatingpressure and variation along the line

• Thedripperandthediaphragmareselfcontained units that are molded to the interior wall of the tubing

• Turbulentflowthroughalargewaterpassagein the labyrinth helps reduce clogging

• Cloggingresistanceisduetothedesignofdripper’sfilterintakeareabeingcontinuouslyflushed by the water flow throughout the operation of the system

• Twooutletsperdripperensuresareducedchance of clogging

• Resistanttochemicalsandfertilizerscommonlyused in the landscape


• Thedriplineismarkedwithflowrateandsizeforeasyidentification

• Usedwithlow-density,UV-resistant,7510polyethylene resin with a Finger Print™

PERFORMANcE 17 MM Pc DRIPlINE

MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 12” 18” 12” 18” 15 PSI 132 163 114 142 25 PSI 295 384 216 285 35 PSI 358 483 257 343 45 PSI 395 536 298 392

FlOw RATE PER 100 FEET Dripper flow rate .53 GPH 1 GPH Spacing GPM GPH GPM GPH 12” 0.88 53.0 1.66 100.0 18” 0.58 35.3 1.11 66.6 24” 0.44 26.5 0.83 50.0

speciFication• FlowRatesandDripperColorCodes ° .53 GPH (2 l/h) Color Code-Orange ° 1 GPH (3.785 l/h) Color Code-Gray• OperatingPressure:12-50PSI(.8-3.5Bar) °CheckValveSealingPressure:1.5PSI (.11 BAR) °CheckValveOpeningPressure:4.3PSI (.3 BAR)• DriplineColorCode:Brown• DriplineSpacing:12”,18”and24” (30.5cm,45.7cmand61cm)• TubingSize:1/2”,.570IDx.670OD(17mm)• MinimumBendingRadius:5’• Availablein100’,500’and1000’Coils (30m, 150m and 300 m) • FilterRequirement:155Mesh

Materials:

•LinerLow-DensityPolyethylene

1.2

1.1

1.0

.09

.08

.07

.06

.05

.04

.03

.02

.01

0

PRESSURE (PSI)

FLO

W R

ATE

(GP

H)

0 5 10 15 20 25 30 35 40 45 50 55 60


11 1.800.322.9146


Jet sprayers DIG’s micro sprayers can be used for a wide range of applications. Available in 90°, 180° and 360° cover-age, with small to large diameter, for watering that requires small droplets with low precipitation rates.Features:• Colorcodedheadssignifyvariousspray

patterns• ConstructedofUV-resistantplasticmaterial

PERFORMANcE FlOw RATE vs. PREssuRE

Pressure Pressure Flow Rate Flow Rate (PSI) (baR) (GPH) (l/h) 15 1.0 8.9 33 20 1.4 10.5 39 25 1.8 12.0 45 30 2.0 13.3 50

NOzzlE DIAMETER 360° 360° 180° 180° 90° 90° (ft) (m) (ft) (m) (ft) (m) 15 4.5 6.0 1.8 6.5 1.9 18 5.4 6.4 1.9 7.5 2.2 19 5.7 6.6 2.0 8.5 2.5 20 6.0 7.0 2.1 9.0 2.7

ORDERING INFORMATION Assembly 90° 180° 360° Color black blue red 10/32 thread 07-001 07-002 07-003 Spike assembly 07-025 07-024 07-023

speciFications:• FlowRates:14GPH(50l/h)• OperatingPressure:15-30PSI (1-2BAR)• WettingDiameter:Upto12’(3.7m)• Pattern:360°,180°,90°• NozzleSize:.031”• AvailablewithSpikeAssemblywith24” Distribution Tubing and Barb or 10/32 Thread • FilterRequirement:120Mesh

a-JetFeatures:

• Mini-valvecanbeadjustedtoreduceflowanddiameter

• Availableon10/32threadorcompletelyassembled with spike and 12” PE riser with barb;nomovingparts

speciFications:• AdjustableFlowRates:0-31GPH (0-117 l/h)• OperatingPressure:10-30PSI (.7-2.0 BAR)•WettingDiameter:Upto25’(7.5m)• Pattern:360°,180°and90°• TrajectoryAngle:Approximately25°• FilterRequirement:80Mesh

ORDERING INFORMATION Model Description 07-061 360° on 10/32 thread 07-062 180° on 10/32 thread 07-063 90° on 10/32 thread MA-136 360° on spike assembly MA-118 180° on spike assembly MA-109 90° on spike assembly

Press Flow Diameter Radius Radius(PSI) (GPH) (ft) (ft) (ft)10 0-16.7 0-18.4 0-6.7 0-6.415 0-21.0 0-22.6 0-8.1 0-8.120 0-24.5 0-25.7 0-9.5 0-9.425 0-28.0 0-26.7 0-10.1 0-9.830 0-31.0 0-26.3 0-10.6 0-10.3


adJustaBle spray Jet

Features:

• Adjustablefullcirclevortexsprayjetwithfinewater droplets

• Easytoinstallusingattachedbarbwithextrawide wings

• Canbeusedwith1/4”distributiontubing (.150-.160ID)• Adjustableflow,includingshutoff• Removablecapforeasycleaning

speciFications:• FlowRate:0-20GPM(0-4.5l/h)• OperatingPressure:15-30PSI(1-2BAR)• Trajectory:100°• FullyOpen:Approximately22clicks• FilterRequirement:120Mesh

ORDERING INFORMATION Model Description 07-005 360° on a 6” stake

Pressure Flow Rate Diameter (PSI) (GPH) (ft) 15 17.2 9.0 20 20.0 11.0 25 22.0 12.2 30 24.3 13.3


www.digcorp.com 12


mist sprayersFeatures:

• Projectsafinemist

• Flattrajectory

• Vortexmechanismallowsforlargerwaterpassage to prevent clogging

• ConstructedofUV-resistantplasticmaterial

speciFications:• FlowRates:6.7-7.6GPH (25.4-28.7 l/h)• OperatingPressure: 30-50 PSI (2.0-3.5 BAR)•WettingDiameter:5.4-7.2’(1.7-2.2m)• Pattern:360°• NozzleSize:0.51”• Availablewith10/32Thread• FilterRequirement:120Mesh

ORDERING INFORMATION Model Description 07-006 Mist sprayer on 10/32 thread


Pressure Flow Rate Diameter (PSI) (baR) (GPH) (l/h) (ft) (m) 40 2.8 6.7 25.0 5.4 1.55 45 3.1 7.1 26.8 5.4 1.55 50 3.5 7.4 28.0 7.2 2.06

exl series FoGGerThe EXL fogger is ideal for misting and cooling. Small droplets create lower ambient temperature with low precipitation rate for better control of plants environment.

Features:

• Incorporatesavortexdesign,whichspinsthewaterdropletsintoafinemist

• Modular,lightweightandeasytoinstall,maintain,andconfigure

• Designedwithoutabridge,topreventdripping

• ThreepartconstructionwithO-ringforatightseal

• Availableon1/2”FNPT,1/4”barbor10/32thread

Materials:

• Body:Polyacetal

• O-ring:Buna-N


Nozzle colors Purple black Green brown GrayNozzlesize(inch) 0.010 0.013 0.020 0.025 0.035Nom.flowrate .8 1 1.5 2 3Diameter (ft) 2.5 2.5 3.5 3.5 4.0Misting angle 70° 70° 70° 70° 80°

FlOw RATEs (GPh)35 PSI 0.76 0.85 1.36 1.68 2.4040 PSI 0.80 0.91 1.49 1.83 2.6145 PSI 0.84 0.98 1.52 1.91 1.7850 PSI 0.85 1.04 1.58 2.02 2.0955 PSI 0.87 1.07 1.64 2.09 3.0260 PSI 0.90 1.14 1.71 2.18 3.1765 PSI 0.91 1.17 1.74 2.26 3.26

ORDERING INFORMATION Model Description Color 07-049 .8 GPH with 1/4” barbed elbow purple 07-050 1 GPH with 1/4” barbed elbow black 07-055 1.5 GPH with 1/4” barbed elbow green 07-056 2 GPH with 1/4” barbed elbow brown 07-057 3 GPH with 1/4” barbed elbow gray 07-101 1.5GPHon1/2”FNPT green 07-102 2GPHon1/2”FNPT brown 07-103 3GPHon1/2”FNPT gray

ORDERING INFORMATION Model Description Color 07-044 .8 GPH with barb purple 07-045 1 GPH with barb black 07-047 .8 GPH on 10/32 thread purple 07-048 1 GPH on 10/32 thread black 07-052 2 GPH on 10/32 thread brown 07-054 3 GPH on 10/32 thread gray

speciFications:• FlowRates:.8-3GPH(3l/h-11.5l/h)• OperatingPressure:35-80PSI (2.4-5.6BAR)• NominalFlowRateat50PSI(3.5BAR)• WettingDiameter:Upto4’(1.2m)• NozzleSize:.10-.35”• Pattern:360°• TrajectoryAngle:80-100°• AverageDropletSize:60-100Microns• FilterRequirement:200Mesh

13 1.800.322.9146


ORDERING INFORMATION Model DescriptionMP-801 1/2”MNPTinlet,90°sprayheadwith8”pop-upMP-802 1/2”MNPTinlet,180°sprayheadwith8”pop-upMP-803 1/2”MNPTinlet,360°sprayheadwith8”pop-upMP-121 1/2”MNPTinlet,90°sprayheadwith12”pop-up MP-122 1/2”MNPTinlet,180°sprayheadwith12”pop-upMP-123 1/2”MNPTinlet,360°sprayheadwith12”pop-up MP-804 1/4” barbed side inlet, 90° head with 8” pop-up MP-805 1/4” barbed side inlet, 180° head with 8” pop-up MP-806 1/4” barbed side inlet, 360° head with 8” pop-up MP-124 1/4” barbed side inlet, 90° head with 12” pop-up MP-125 1/4” barbed side inlet, 180° head with 12” pop-up MP-126 1/4” barbed side inlet, 360° head with 12” pop-up

8” & 12” pop-up microsprayers

The MP series pop-up micro sprayers are designed to provide solutions where low pressure and low flow-rate nozzles are required. Pop-ups are helpful where conventional sprinkler systems or drip irrigation would not be practical. The MP series utilizes double seals to ensure reliable operation and long-term performance.

Features:

• 8”and12”pop-uplength

• Uniquedesignincorporatesapressureactivated, low friction, upper stem seal and a second stage piston seal to ensure positive sealing

• Canbeinstalledonanysize1/2”polyethylenetubing

• Canbeusedwith1/4”(.150-.160ID)distribution tubing

• Ruggedmaterialscanwithstandadverseconditions

• Installbelowgrade

speciFications: •FlowRate:.15-.63GPM(34-143l/h)•OperatingPressure: 15-35 PSI (1-2.4 BAR)•WettingDiameter:Upto5’(1.5m)•NominalOperatingPressure: 30 PSI (2.1 BAR)•Pop-UpHeight: ° 8” (20.3 cm) or when up 13” (33 cm) ° 12” (30.5 cm) or when up 21” (53.34 cm)•Trajectory:Flat•Availablewith1/2”NMPTThread or 1/4” Barbed Side Outlet•PrecipitationRate:2.0-2.8inch/h•FilterRequirement:120Mesh

Materials:

• BodyandPiston:Semi-RigidPolypropylene

• Seals:EPDMandVinyl

• Base:HighImpactPlastic

• Spring:StainlessSteel304

Fan spray JetThe fan spray jets are of one piece construction and use a flat pattern and low flow for landscape and horticultural applications.

Features:

• Easytoinstallusingthequickthreadbaseandwide wing edges

• Canbeusedwith1/4”(.150-.160ID)distribution tubing

• Colorcodednozzlesforeasyidentification

ORDERING INFORMATIONModel Description Color07-080 90° spray head blue07-081 180° spray head green07-082 360° spray head red


Pressure Flow Rate Radius (PSI) (GPM) (ft)

360°–SprayNozzleColor:Red,0.075” 15 0.45 3.5 20 0.52 4.0 25 0.57 4.5 30 0.63 5.0

180°–SprayNozzleColor:Green,0.060” 15 0.31 3.5 20 0.36 4.0 25 0.41 4.5 30 0.45 5.0

90°–SprayNozzleColor:Blue,0.040” 15 0.15 3.5 20 0.18 4.0 25 0.21 4.5 30 0.23 5.0

speciFications:• FlowRate:.15-.63GPM(34-143l//h)• OperatingPressure:15-35PSI(1-2.4BAR)• WettingDiameter:Upto5’(1.5m)• PatternandColorCodes: °90°ColorCode-Blue ° 180° Color Code - Green °360°ColorCode-Red• NozzleSize:.40-.75”• NominalOperatingPressure:30PSI (2.1 BAR)• Trajectory:Flat• PrecipitationRate:2.0-2.8inch/h• FilterRequirement:120Mesh

www.digcorp.com 14


air relieF ValVe The air vacuum relief valve allows air to exit and enter the dripline laterals during initial system startup use, and prevents suction of debris into the drip emitters under vacuum conditions when the system is shut down.

Features:• Largeairpassage• Highresistancetochemicals• Smoothoperation• Preventsvacuumandsuctionofdirtintothe

polyethylene tubing via the drippers

Flush ValVeDIG’s flush valves help to prevent accumulation of small particles at the end of the dripline or drip tubing during initial system pressure build-up by automatically opening and closing at the beginning and end of each irrigation cycle.

Features:• Flushessmallparticleswhichhaveformed

in the pipe at the starting and closing of the irrigation cycle

• Reducesdepositbuild-up• Openandcloseatlowpressure• Helpstopreventcloggingofdrippers

Materials:• Housing:HighImpactPlastic

• Springs:StainlessSteel304

• O-ring:NaturalRubberBR

shut oFF ValVesUse DIG’s shut off valves for control of individual driplines and laterals.

Features:• InletandoutletO-ringsensurewatertight

seals• Largehandleforeasymanualcontrol• Rapid1/4”turnonandofffortight,nodrip,

shut off

ORDERING INFORMATION Model Description 28-004 3/4”FNPTx3/4”MNPT 28-006 3/4”FNPTx.600barb(17mm) 28-007 .600 ID x .600 ID barb (17 mm) 28-018 3/4” FHT x MHT flush valve 28-012 3/4”FNPTx.520barb(16mm) 28-013 .520 ID x .520 ID barb (16 mm)

Materials:

• Body:Polypropylene

• O-ring:Buna-N

Dimensions:

• 3.2”Wx1.8”H (8cmWx4.6cmH)

ORDERING INFORMATION Model Description 18-039 Automatic flush valve opened at 2 PSI, with 3/4” FHT swivel 18-040 Automatic flush valve opened at 4 PSI, with 3/4” FHT swivel 18-041 Automatic flush valve opened at 2 PSI, with3/4”FNPTswivel 18-042 Automatic flush valve opened at 4 PSI, with3/4”FNPTswivel

ORDERING INFORMATIONModel Description18-028 1/2” air vacuum relief valve

speciFications:• OperatingPressure:Upto140PSI (9.8BAR)• TemperatureRange:Upto130°F(54°C)• 1/2”MNPT

speciFications:• OperatingPressure:7-60PSI (0.5-4.2 BAR)• Availablewith3/4”FHTorFNPT• OpeningPressure:2or4PSI

speciFications:• OperatingPressure:Upto60PSI (4.2 BAR)• Temperature:Upto130°F(54°C)

Materials:

• PlasticwithBuna-NSeal

15 1.800.322.9146


drip Zone assemBlyDIG’s 3/4” drip zone assemblies come with all the components necessary to start any drip or micro sprinkler installation. Each unit comes assembled with a 24 VAC valve, battery operated controller LEMA 1600 HE, DC or AC solenoid with filter and an adjustable or preset pressure regulator.

Features:

• Availablewith24VAC,6-9DC,batteryoperated or LEMA solenoid

• Heavydutyglassreinforcednylonvalve

•Slowclosing

•Easyin-linemaintenance

•Largecapacityfilter

• Completelyassembled

• Valvedesignedforcompactenclosures

• Singlepiecediaphragm

• Valvewithflowcontrolandmanualbleed

• Availablewithadjustableorpresetpressureregulator

ORDERING INFORMATION Model Description P39-075 3/4” 24 VAC valve assembly adjustable P51-075 Battery operated valve assembly 3/4”FNPTx3/4”MNPT

ORDERING INFORMATION Model Description P40-075 3/4” 24 VAC valve assembly preset P53-075 DC (LEIT-2) 6-9 volt valve assembly

ORDERING INFORMATIONModel Description

P52-075 DC(LEIT)Assembly3/4”FNPTx3/4”MNPT

speciFications:• P39-075: °3/4”FNPT ° Downstream Pressure Range Adjusting from 12-35 PSI (.8-2.5 BAR)• P40-075,P50-075,P51-075andP53-075: °3/4”FNPTx3/4”MNPT ° Downstream Preset Pressure: 30 PSI (2 BAR)• FlowRates: °3/4”:.1-12GPM(.23-3.6m3/h)• OperatingPressure:10-125PSI (.7-8.7 BAR)• TemperatureRange:Upto130°F(54°C)• FiltrationArea:11SquareInches(71cm2)• Weight:1.5Lbs.(.68kg)

Dimensions:

• 11.25”Lx9”H (28.5 cm L x 23 cm H)

www.digcorp.com 16


adJustaBlepressure reGulators

Direct acting pressure regulators are specifically designed for use where accurate and reliable control of line pressure is required, regardless of fluctuations in upstream pressure and/or flow. The use of a rolling diaphragm completely separates the spring assembly from dirt or contaminants in the flow stream and provides long, trouble-free service while ensuring immediate response to flow and pressure variations.

PERFORMANcEsPRING RATEs

Downstream Operating Range Spring & Disc Color Min. PSI Max. PSI Model 18-007 Red 28 60 Model 18-008 White 12 35

Features:

• Adjustablewithasinglescrew

• Rollingdiaphragmkeepsthespringassemblyfree of debris

• Reliablecontrolregardlessoffluctuationsinupstream pressure or flow

preset pressure reGulators

Features:

• Threepresetpressuresavailable

• Flowratefrom.1-15GPM(6-900GPH)

• Reliablecontrolregardlessoffluctuationinupstream pressure or flow

•Withstandsseverewaterhammer

• Canbeinstalledaboveorbelowground

speciFications:• FlowRates:.1-15GPM(.22-3.4m3/h)• PressureRange:20,25and30PSI (1.3, 1.7 and 2 BAR)• MaximumRecommendedFlow: 10 GPM• MaximumWorkingPressure: 80 PSI (5.5 BAR)•Weight:.20lb(.09kg)• 3/4”FNPTx3/4”MNPT

ORDERING INFORMATIONModel Description18-008 Adjustable pressure regulator 12-35 PSI18-007 Adjustable pressure regulator 28-60 PSI

ORDERING INFORMATION Model Description 18-020 Preset pressure regulator 20 PSI 18-025 Preset pressure regulator 25 PSI 18-030 Preset pressure regulator 30 PSI

Inlet Pressure 20 30 40 50 60Flow rate (GPM) Outlet Pressure in PSI 1 27 31 28 32 28 32 29 33 29 32 3 26 29 27 31 27 31 27 31 27 33 6 26 28 26 31 26 31 27 31 27 31 9 25 20 26 20 26 20 26 20 27 12 23 19 26 20 26 20 26 20 26

PERFORMANcEFlOw RATE vs. PREssuRE


speciFications:• FlowRates:.2-22GPM(.045-5m3/h)• PressureRange:12-60PSI(.8-4BAR)• MaximumWorkingPressure: 125PSI(8.6BAR)• Weight:.75lb(.34kg)• 3/4”FNPT

Materials:

• Body:Plastic

• Actuator:Plastic

• RollingDiaphragm:NylonReinforcedNeoprene


Dimensions:

• 4”Hx3.44”W (10cmHx19cmW)

Materials:

• Body:Plastic


17 1.800.322.9146

Filters3⁄4” and 1” plasticFilters with screenelements

Used for residential and commercial applications. P10 thru P19 filters have pressure ratings of up to 120 PSI. Simple and easy to operate, the filters provide reliable, low-maintenance filtration for trouble-free operation.

Features:

• Lowfrictionloss

• Widerangeofpolyesterandstainlesssteelscreens in 40-200 mesh

• Screenshaveexcellentresistancetomostcommon chemicals

• Colorcodedreplacementscreens

• Availablewithflushcaporflushvalve

• Easymaintenance:screencanbeextractedfromfilterforeasycleaning

• Non-corrosivematerials

• Interchangeablescreenanddiscelementswithawiderangeoffiltrationdegrees


P10-XXX 3/4”MNPTw/polyesterscreen&flushcap P11-XXX 3/4”MNPTw/SSscreen&flushcap P12-XXX 3/4”MNPTw/polyesterscreen&flushvalve P13-XXX 3/4”MNPTw/SSscreen&flushvalve P16-XXX 1”MNPTw/polyesterscreen&flushcap P17-XXX 1”MNPTw/SSscreen&flushcap P19-XXX 1”MNPTw/SSscreen&flushvalve

ORDERING INFORMATION Model Description Color17-401 40 Mesh polyester screen navy blue17-402 80 Mesh polyester screen blue17-403 120 Mesh polyester screen brown17-404 155 Mesh polyester screen green17-405 200 Mesh polyester screen burgundy17-412 80 Mesh stainless steel screen blue17-413 120 Mesh stainless steel screen brown17-414 155 Mesh stainless steel screen green17-415 200 Mesh stainless steel screen burgundy

Chemical Resistance:

• Acids:

°Verygoodresistancedependingonconcentration and temperature.

° Excellent resistance to most mineral acids

• Alkali:Limitedresistancedependingonconcentration and temperature

• Excellentresistancetolowconcentratedlyes.Notrecommendedforuseinhighlyconcentrated lyes

Screen Materials:

• Cylinder:Polyester

• Screen:PolyesterorStainlessSteel304

• O-ring:EPDM

suRFAcE AREA AND FlOw RATE Filtration Max RecommendedSize Size Surface area Flow RatesInch mm sq. inch cm2 GPM m3/h3/4 20 28.5 183 13 3.41 25 28.5 183 18 4.0


P09-XXX 3/4”FHTxMHTw/polyesterscreen&flushcap P14-XXX 3/4”FHTxMHTw/SSscreen&flushcap P15-XXX 3/4”FHTxMHTw/SSscreen&flushvalve

Filter Materials:

• Housing:Polypropylene

• O-ring:EPDM

FIlTRATION DEGREE AND MATERIAlMesh Micron Material Color80 180 stainless steel blue120 130 stainless steel brown155 100 stainless steel green200 80 stainless steel burgundy40 400 polyester navy blue80 180 polyester blue120 130 polyester brown155 100 polyester green200 80 polyester burgundy

DIMENsIONs AND wEIGhTSize a D L H WtInch in mm in mm in mm in mm lb3/4 w/cap 4.71 120 1.5 38 6 152 7 177 .4571 w/cap 4.74 120 1.5 38 6 152 7 177 .4573/4 w/flush valve 4.71 120 1.5 38 6 152 8 203 .4891 w/flush valve 4.74 120 1.5 38 6 152 8 203 .489

a

LH

D

CaP

COVER

O-RING

SCREEN

bODY

O-RING

O-RING

speciFications:• OperatingPressure:Upto120PSI (8.4 BAR)• TemperatureRange:Upto130°F(54°C)• MNPTInletandOutletorFHTxMHT

24

20

16

12

8

4

00 5 10 15 20 25 30 40

3/4"

1"

FLOW RATE (GPM)

HE

AD

LO

SS

(PS

I)

hEAD lOss IN PsI

www.digcorp.com 18

a

LH

D

CaP

COVER

O-RING

DISK

bODY

O-RING

SPRING

SLEEVE

SPIN

Filters

3⁄4” and 1” plasticFilters with discelements

Designed to be used with disc elements for greater operation efficiency. Series P30 and P31 filters provide a reliable, low-maintenance solution for any low-volume irrigation application.

Features:

• Sedimentsaccumulateontheouterfaceofthestacked discs, allowing clean water to flow through the stacked discs and out the middle of thefilter

• Discelementsprovidein-depthfiltrationtoretain organic matter

• Discshaveexcellentresistancetomostcommon chemicals

• Easymaintenance;thediscscanbeextractedfor easy cleaning

• Interchangeablediscandstainlesssteelscreenelementsprovideawiderangeoffiltrationdegrees

24

20

16

12

8

4

05 10 15 20 25 30 40 50

3/4"

1"

FLOW RATE (GPM)

HE

AD

LO

SS

(PS

I)

Disc Materials:

• GroovedDiscs:Polypropylene

• DiscCylinderAssembly:Polypropylene

• TighteningSpring:StainlessSteel304

suRFAcE AREA AND FlOw RATE

Filtration Max RecommendedSize Size Surface area Flow RatesInch mm sq. inch cm2 GPM m3/h3/4 20 28 180 13 3.41 25 28 180 18 4.0

hEAD lOss IN PsI


P31-XXXD1”MNPTwithdiscelementsandflushcap


P30-XXXD3/4”MNPTwithdiscelementsandflushcap

Filter Materials:


• O-ring:EPDM

FIlTRATION DEGREE AND MATERIAlMesh Micron Material Color80 180 polypropylene blue120 130 polypropylene red150 100 polypropylene black

DIMENsIONs AND wEIGhT

Size a D L H WtInch in mm in mm in mm in mm lb3/4 4.71 120 1.5 38 6 152 7 177 .6441 4.74 120 1.5 38 6 152 7 177 .638

ORDERING INFORMATIONModel Description Color17-432 80 Mesh disc set yellow17-433 120 Mesh disc set red17-434 150 Mesh disc set black

speciFications:• OperatingPressure:Upto120PSI (8.4 BAR)• TemperatureRange:Upto130°F(54°C)• 3/4”and1”MNPTInletandOutlet

19 1.800.322.9146

Filters

ORDERING INFORMATION Model Description P80-XXXI 2”MNPTwithSSscreenandflushcap

ORDERING INFORMATION Model Description P75-XXXI 11/2”MNPTlongwithSSscreenandflushcap

ORDERING INFORMATION Model Description Color 17-080L 80 Mesh stainless steel, 1 1/2” long Blue 17-120L 120 Mesh stainless steel, 1 1/2” long Brown 17-155L 155 Mesh stainless steel, 1 1/2” long Green 17-200L 200 Mesh stainless steel, 1 1/2” long Burgundy 17-085 80 Mesh stainless steel, 2” Blue 17-125 120 Mesh stainless steel, 2” Brown 17-160 155 Mesh stainless steel, 2” Green 17-205 200 Mesh stainless steel, 2” Burgundy

11⁄2” and 2” plasticFilters with stainless steel screens

Used for residential, commercial and nursery applications. P75 and P80 screen filters provide a quick solution for a wide range of irrigation applications.

Features:

• Lowfrictionloss

• Widerangeofstainlesssteelscreensin80-200mesh

• Screenshaveexcellentresistancetomostcommon chemicals

• Colorcodedreplacementscreens

• Easymaintenance:screencanbeextractedfromfilterforeasycleaning

• Non-corrosivematerials

• 11/2”longand2”filterscreensareinterchangeable with a disc cartridge

Chemical Resistance:

• Acids:

°Verygoodresistancedependingonconcentration and temperature.

° Excellent resistance to most mineral acids

• Alkali:Limitedresistancedependingonconcentration and temperature

• Excellentresistancetolowconcentratedlyes.Notrecommendedforuseinhighlyconcentrated lyes

Filter Materials:


• O-ring:EPDM

• PressureTestingPort:Polypropylene

• PressureTestingSeals: NaturalRubberBR

Screen Materials:

• Cylinder:Polyester

• Screen:PolyesterorStainlessSteel

• O-ring:EPDM

14.413.0

7.22

5.884.35

2.88

1.44

0.72

0.4322 44 60 88 131 263

Reco

mm

ende

d Ra

nge

HEAD

LOS

S (P

SI)

FLOW RATE (GPM)


Filtration Max RecommendedSize Size Surface area Flow RatesInch mm sq. inch cm2 GPM m3/h1 1/2” Long 38 85 552 50 11.32” 50 103 670 80 18.1

hEAD lOss IN PsI

FIlTRATION DEGREE AND MATERIAl

Mesh Micron Material Color80 180 stainless steel blue120 130 stainless steel brown155 100 stainless steel green200 80 stainless steel burgundy

a

L

H

DCaP

SPINE

O-RING

RINGS

bODY

SPRING

O-RING

O-RING


Size a D L H WtInch in mm in mm in mm in mm lb1 1/2” long 10.1 257 3.1 80 8.6 220 9.4 240 2.32” 10.1 257 3.1 80 10.4 265 10.6 270 2.6

speciFications:• OperatingPressure: Up to 120 PSI (8.4 BAR)• TemperatureRange:Upto130°F(54°C)• 11/2”and2”MNPTInletandOutlet

www.digcorp.com 20

Filters

11⁄2” and 2” plasticFilters with discelements

The P75 and P80 are compact and cost effective disc filters with outstanding performance in a wide variety of situations and irrigation conditions.

Features:

• Sedimentsaccumulateontheouterfaceofthe stacked discs allowing clean water to flow through the stacked discs and out the middle of thefilter

• Discelementsprovidein-depthfiltrationtoretain organic matter

• Hydraulicpressureduringthefilteringprocesscauses fastening of the disc and allows for efficientfiltering

• Discshaveexcellentresistancetomostcommon chemicals

• Easymaintenance;thediscscanbeextractedfor easy cleaning

• Interchangeablediscandstainlesssteelscreenelementsprovideawiderangeoffiltrationdegrees

ORDERING INFORMATION Model Description P80-XXXDI2”MNPTdiscfilter


P75-XXXDLI11/2”(long)MNPTdiscfilter

FIlTRATION DEGREE AND cOlOR

Mesh Micron Material Color40 400 polypropylene blue80 180 polypropylene yellow120 130 polypropylene red150 100 polypropylene black


Filtration Max RecommendedSize Size Surface area Flow RatesInch mm sq. inch cm2 GPM m3/h1 1/2” Long 38 60 385 40 9.02” 50 79 520 60 13.6

hEAD lOss IN PsI

ORDERING INFORMATION Model Description Color17-040D 40 Mesh, 1 1/2” long disc set blue17-041D 80 Mesh, 1 1/2” long disc set yellow17-042D 120 Mesh, 1 1/2” long disc set red17-043D 150 Mesh, 1 1/2” long disc set black17-044D 40 Mesh, 2” disc set blue17-045D 80 Mesh, 2” disc set yellow17-046D 120 Mesh, 2” disc set red17-047D 150 Mesh, 2” disc set black

Filter Materials:


• O-ring:EPDM

• PressureTestingPorts:Polypropylene

• PressureTestingSeals:Natural Rubber BR

14.413.0

7.22

5.88

1.44

.1448 13 22 30 44 60 88

Reco

mm

ende

d Ra

nge

HEAD

LOS

S (P

SI)

FLOW RATE (GPM)

a

L

H

DCaP

SPINE

O-RING

RINGS

bODY

SPRING

O-RING

O-RING

Disc Materials:

• GroovedDiscs:Polypropylene

• DiscCylinderAssembly:PBT

• TighteningSpring:StainlessSteel304

speciFications:• OperatingPressure:Upto120PSI(8.4BAR)• TemperatureRange:Upto130°F(54.4°C)• MNPTInletandOutlet


Size a D L H WtInch in mm in mm in mm in mm lb1 1/2” long 10.1 257 3.1 80 8.6 220 9.4 240 2.32” 10.1 257 3.1 80 10.4 265 10.6 270 2.6

21 1.800.322.9146

poly and distriBution tuBinG1⁄8” and 1⁄4” VinyldistriBution tuBinG

Features:

• 1/8”usedwithTOP12-outletemitters

• UV-resistant

• Madeofhighqualitymaterial

• 500’,1000’and3000’coilscomeoncardboardcores

ORDERING INFORMATION Model Description 12-006 100’1/8”blackvinyl.118IDx.187OD 12-042 500’1/8”blackvinyl.118IDx.187OD 12-043 1000’1/8”blackvinyl.118IDx.187OD 12-019 3000’1/8”blackvinyl.118IDx.187OD 12-002 100’1/4”brownvinyl.156IDx.245OD 12-049 500’1/4”brownvinyl.156IDx.245OD 12-013 100’1/4”blackvinyl.156IDx.245OD 12-005 500’1/4”blackvinyl.156IDx.245OD 12-050 1000’1/4”blackvinyl.156IDx.245OD 12-015 3000’1/4”blackvinyl.156IDx.245OD

1⁄2” thru 1”polyethylene tuBinG

Features:

• Madeoflow-density7510UnionCarbideUV-resistantpolyresinmaterial

• Maybeusedaboveorbelowground

• Minimum2%carbonblackaddedformaximumUVprotection

• Availableinawiderangeofcoillengths

1⁄8” and 1⁄4”polyethylenedistriBution tuBinG

Features:

• 500’,1000’and3000’coilscomeoncardboardcores

• Madeoflow-density7510UnionCarbideUV-resistantpolyresinmaterial

ORDERING INFORMATION Model Description 14-011 500’ 1”blackpoly1.06IDx1.20OD 14-002 500’ 3/4”blackpoly.820IDx.940OD 14-004 50’ 1/2”blackpoly.600IDx.700OD 14-005 100’ 1/2”blackpoly.600IDx.700OD 14-006 200’ 1/2”blackpoly.600IDx.700OD 14-007 500’ 1/2”blackpoly.600IDx.700OD 14-008 1000’ 1/2”blackpoly.600IDx.700OD 31-004 50’ 1/2”blackpoly.520IDx.620OD 31-005 100’ 1/2”blackpoly.520IDx.620OD 31-006 200’ 1/2”blackpoly.520IDx.620OD 31-007 500’ 1/2”blackpoly.520IDx.620OD 31-008 1000’ 1/2”blackpoly.520IDx.620OD 31-010 100’ 1/2”blackpoly.615IDx.710OD 31-011 200’ 1/2”blackpoly.615IDx.710OD 31-012 500’ 1/2”blackpoly.615IDx.710OD 31-013 1000’ 1/2”blackpoly.615IDx.710OD 14-011 250’ 1”blackpoly1.060IDx1.200OD 14-012 500’ 1”blackpoly1.060IDx1.200OD

ORDERING INFORMATION Model Description 12-036 100’1/8”blackpoly.125IDx.187OD 12-075 500’1/8”blackpoly.125IDx.187OD 12-080 1000’1/8”blackpoly.125IDx.187OD 12-085 3000’1/8”blackpoly.125IDx.187OD 12-055 100’1/4”blackpoly.160IDx.220OD 12-056 500’1/4”blackpoly.160IDx.220OD 12-057 1000’1/4”blackpoly.160IDx.220OD 12-038 100’1/4”blackpoly.170IDx.250OD 12-041 500’1/4”blackpoly.170IDx.250OD 12-060 1000’1/4”blackpoly.170IDx.250OD 12-065 3000’1/4”blackpoly.170IDx.250OD

Material:

• Vinyl

Material:

• Fingerprint™ 7010 Polyethylene

Material:

• Fingerprint™ 7510 Polyethylene

speciFications:• OperatingPressure:Upto60PSI (4.2 BAR)• Sizes: °1/2”Availablein3Configurations: •.520IDx.620OD •.600IDx.700OD •.615IDx.710OD ° 3/4”:.820IDx.940OD ° 1”:1.060IDx1.200OD

speciFications:• OperatingPressure:Upto30PSI (2.1 BAR)• Sizes: ° 1/8”: .125 ID x .187 OD ° 1/4”: .170 ID x .250 OD

speciFications:• OperatingPressure:Upto30PSI (2.1 BAR)• Sizes: ° 1/8”: .118 ID x .187 OD °1/4”:.156IDx.245OD• Stiffness:90Shore

www.digcorp.com 22

FittinGs

series 450, 620, 700and 710 compression FittinGs

Features:

• Highimpactplastic

• Colorcoded

• UV-resistant

• Secureandeasyinstallationwithoutgluesorclamps

• FitsallDIG16and17mmdriplineand1/2”polyethylenetubing.450,.620,.700and.710OD)

speciFications:•OperatingPressure:Upto60PSI(4.2BAR)

uniVersal 1⁄2” nut lock FittinGs

Features:

• Fits.620,.700and.710tubing (16mmand17mm)

• Threepartconstruction

• Threadednutforeasyassembly

• UV-resistant

• Availableinfourdifferentconfigurations

speciFications:•OperatingPressure:60PSI(4.2BAR)

Materials:

• BodyandNut:Polypropylene

• Barb:Acetal

ORDERING INFORMATIONModel Description15-055 Universal coupling15-056 Universal elbow15-057 Universal tee15-058 Universal swivel tee with washer


24-012 .450ODcouplingwithredinsert 24-002 .620ODcouplingwithgreeninsert 15-004 .700ODcouplingwithblackinsert 15-014 .710ODcouplingwithblueinsert 15-003 .700ODx.710ODreducingcoupling 15-009 .700ODx.620ODreducingcoupling 15-010 .700ODx.450ODreducingcoupling 24-015 .450ODteewithredinsert 24-003 .620ODteewithgreeninsert 15-006 .700ODteewithblackinsert 15-016 .710ODteewithblueinsert 24-013 .450ODelbowwithredinsert 24-004 .620ODelbowwithgreeninsert 15-007 .700ODelbowwithblackinsert 15-015 .710ODelbowwithblueinsert 24-014 .700ODx.700ODx.450ODreducingtee


24-016 .450OD3/4”FHTswiveladapterwithscreen 24-001 .620OD3/4”FHTswiveladapterwithscreen 15-005 .700OD3/4”FHTswiveladapterwithscreen 15-017 .710OD3/4”FHTswiveladapterwithscreen 24-017 .450OD3/4”FHTswiveladapterwithwasher 24-010 .620OD3/4”FHTswiveladapterwithwasher 15-020 .700OD3/4”FHTswiveladapterwithwasher 15-021 .710OD3/4”FHTswiveladapterwithwasher 24-028 .620OD3/4”FNPTswiveladapterwithscreen 24-029 .700OD3/4”FNPTswiveladapterwithscreen 24-030 .710OD3/4”FNPTswiveladapterwithscreen 24-006 .620OD3/4”FNPTswiveladapterwithwasher 15-024 .700OD3/4”FNPTswiveladapterwithwasher 15-023 .710OD3/4”FNPTswiveladapterwithwasher 24-018 .450OD3/4”FHTendcapwithredinsert 24-005 .620OD3/4”FHTendcapwithgreeninsert 15-012 .700OD3/4”FHTendcapwithblackinsert 15-018 .710OD3/4”FHTendcapwithblueinsert 24-024 .450OD3/4”MPTadapterwithredinsert 24-025 .620OD3/4”MPTadapterwithgreeninsert 24-026 .700OD3/4”MPTadapterwithblackinsert 24-027 .710OD3/4”MPTadapterwithblueinsert 24-020 .450OD3/4”MHTadapterwithredinsert 24-021 .620OD3/4”MHTadapterwithgreeninsert 24-022 .700OD3/4”MHTadapterwithblackinsert 24-023 .710OD3/4”MHTadapterwithblueinsert 24-007 .620OD3/4”FHTswivelteewithscreen 15-008 .700OD3/4”FHTswivelteewithscreen 15-022 .710OD3/4”FHTswivelteewithscreen 24-058.620OD3/4”FHTswivelteewithwasher 24-059 .700OD3/4”FHTswivelteewithwasher 24-060 .710OD3/4”FHTswivelteewithwasher 24-061 .620OD3/4”MHTteewithgreeninsert 24-062 .700OD3/4”MHTteewithblackinsert 24-063 .710OD3/4”MHTteewithblueinsert 24-064 .620OD3/4”FNPTswivelteewithwasher 24-065 .700OD3/4”FNPTswivelteewithwasher 24-066 .710OD3/4”FNPTswivelteewithwasher 24-081 .450OD3/4”FHTflushvalve,lowpressure 24-082 .620OD3/4”FHTflushvalve,lowpressure 24-083 .700OD3/4”FHTflushvalve,lowpressure 24-084 .710OD3/4”FHTflushvalve,lowpressure 24-085 .450OD3/4”FHTflushvalve,highpressure 24-086 .620OD3/4”FHTflushvalve,highpressure 24-087 .700OD3/4”FHTflushvalve,highpressure 24-088 .710OD3/4”FHTflushvalve,highpressure

Materials:

• Body:ABS

• Inserts:Polycarbonate

23 1.800.322.9146

FittinGs1⁄2” BarB FittinGs

Features:


• UV-resistant

• Forsecureandeasyinstallationwithoutglueorclamps

• FitsallDIGdriplineandpolyethylenetubingwith16and17ID(.550-.620ID)

• Availablewithacombinationofthreadsandbarbs

• Onepiececonstruction

speciFications:•OperatingPressure:Upto30PSI (2.1 BAR)

Material: • Acetal

ORDERING INFORMATIONModel Description15-033 .520 ID (16 mm) 1/2” male adapter tee x barb15-043 .600 ID (17 mm) 1/2” male adapter tee x barb15-034 .520 ID (16 mm) 3/4” male adapter tee x barb15-044 .600 ID (17 mm) 3/4” male adapter tee x barb15-035 .520 ID (16 mm) 3/4” female adapter tee x barb15-045 .600 ID (17 mm) 3/4” female adapter tee x barb15-036 .520 ID (16 mm) 1/2” male adapter x barb15-046 .600 ID (17 mm) 1/2” male adapter x barb15-037 .520 ID (16 mm) 1/2” elbow male adapter x barb15-047 .600 ID (17 mm) 1/2” elbow male adapter x barb

15-038 PVCsinglestarterconnectorwithO-ring .520 ID (16 mm) 15-048 PVCsinglestarterconnectorwithO-ring .600 ID (17 mm)15-039 3/4” male adapter x 16 mm .520 ID15-049 3/4” male adapter x 17 mm .600 ID

ORDERING INFORMATIONModel Description25-001 1/4” long barb25-002 1/4” tee25-003 1/4” elbow25-004 1/4” short barb

1⁄4” BarB FittinGsFeatures:

• Secureandeasyinstallationwithoutglueorclamps

• Largeinsidediameterformaximumflow

• Onepiececonstruction

• UV-resistant

• Fits1/4”(.145-.190ID)distributiontubing

speciFications:•OperatingPressure:Upto30PSI (2.1 BAR)

Material: • Acetal

ORDERING INFORMATIONModel Description15-030 .520 ID (16 mm) insert Coupling15-040 .600 ID (17 mm) insert Coupling15-031 .520 ID (16 mm) insert Tee15-041 .600 ID (17 mm) insert Tee15-032 .520 ID (16 mm) insert Elbow15-042 .600 ID (17 mm) insert Elbow

www.digcorp.com 24

accessories

1⁄4” in-line shut oFF ValVe

Features:

• Adjustsflowfrom0-25GPH(0-95l/h)


• UV-resistant

• Forsecureandeasyinstallationwithoutglueorclamps

• Fitsall1/4”distributiontubing

hose end &GooF pluGs

Hose End Features:

• Smallandlargehoseendsforeasyinsertion

• UV-resistant

• Madeofpolypropylene

• OperatingPressure:upto60PSI

Goof Plug Features:

• Usedtoplugholesinmainlineortostopflowout of the end of 1/4” distribution tubing

ORDERING INFORMATIONModel Description16-020 Small punch16-035 Pro punch with 3 mm pin16-045 Pro punch with 4 mm pin16-065 Deluxe punch with cutter

16-066 Insertiontoolfor.250-.270ODmicrotubing

shruB adapter Features:

• Forinstallingadripperorsprayjetona 1/2” riser

• Availablewith10/32threadorbarb

• UV-resistant

ORDERING INFORMATIONModel Description Color

24-008 Insertfor1/2”.620OD green 15-067 Insertfor1/2”.670OD brown 15-013 Insertfor1/2”.700OD black 15-019 Insertfor1/2”.710OD blue 16-018 Insertfor3/4”.930OD black

pVc insertsFeatures:

• Gluesintotheslipsideofany1/2”PVCfitting

• UV-resistant

speciFications:•OperatingPressure:Upto80PSI(5.5BAR)

ORDERING INFORMATIONModel Description16-015 3/4” hose end16-021 1/2” hose end16-022 Goof plug, strip of 10


16-034Shrubadapterwith10/32x1/2”FNPT16-054 Shrub adapter with press-fit tee16-056 Shrub adapter with press-fit barb


16-003 Swiveladapter3/4”FHTxMNPTwithwasher 16-010 Nipple3/4”MHTxMNPT16-013 Cap 3/4” FHT with washer

16-014 Cap3/4”FNPTwithwasher

threaded FittinGsFeatures:

• Hoseorpipethreadmaleandfemale

punchesFeatures:

• Usedtopunctureholeswheninstallingdrippersand micro sprinklers in polyethylene tubing

• Easygriphandleconstructedofdurableplasticand non-corrosive materials

• Propunchanddeluxepunchpinscanbereplaced

• Deluxepunchcuts1/2”polyethylenetubingand 1/4” distribution tubing with cutter in handle

ORDERING INFORMATION Model Description 16-007 In-line shut off valve with 1/4” barb 16-028 In-line shut off valve with 10/32 thread

speciFications:• OperatingPressure:Upto30PSI (2.1 BAR)• 1/2”FNPTx10/32Thread• 1/2”FNPTx1/4”barbspeciFications:

• FlowRates:25GPH(95l/h)• OperatingPressure:Upto30PSI (2.1 BAR)• MaximumHeadLoss:6PSI(.4BAR)

speciFications:• OperatingPressure:Upto80PSI (5.6BAR)• 3/4”MNPTor3/4”MHT• 3/4”FNPTor3/4”FHT

25 1.800.322.9146

accessories

ORDERING INFORMATIONModel Description16-046 8” PE riser with clip spike assembly16-047 10” PE riser with clip spike assembly16-048 12” PE riser with clip spike assembly16-049 16” PE riser with clip spike assembly16-108 8” PE riser with adjustable stake assembly16-112 12” PE riser with adjustable stake assembly

stakes Features:


• UV-resistant

• Forsecureandeasyinstallationof 1/2” polyethylene and 1/4” distribution tubing

• Flowrateonstakeisadjustabletooff

• Stakewithflow adjustment available with 10/32 thread

ORDERING INFORMATIONModel Description16-011 Stake for 1/2” polyethylene tubing 16-016 “V” Stake16-017 6” stake with barb for 1/8” polyethylene tubing 16-023 4” stake16-025 13” clip spike16-043 Adjustable stake with 10/32 thread

semi riGid pe riserassemBly on stake

Features:

• Pre-assembledwith rigid polyethylene (PE) riser (.160IDx.300OD)

• Flowrateonstake is adjustable to off

• Constructedof UV-resistantplastic material

semi riGid pe riserassemBly

Features:

• Pre-assembledwithrigidpolyethylene (PE)riser(.160IDx.300OD)

• ConstructedofUV-resistantplastic material

ORDERING INFORMATIONModel Description16-030 6” semi-rigid PE riser with barb16-036 8” semi-rigid PE riser with barb16-038 12” semi-rigid PE riser with barb16-044 16” semi-rigid PE riser with barb

16-208 1/2”MNPTadapterassemblywith8”PEriser16-212 1/2”MNPTadapterassemblywith12”PEriser

pop-up riser assemBly

Features:

• Availablein8”or12”with1/2”MNPTorwith1/4” barb

• Uniquedesignincorporatesapressureactivated, low friction, upper stem seal and a second stage piston seal to insure positive sealing

• 1/4”sideoutletcanbeusedwith1/4” (.150-.170 ID) distribution tubing and installed on any polyethylene tubing

ORDERING INFORMATION Model Description 16-508 8” Pop-up riser with 1/4” barb 16-509 12” Pop-up riser with 1/4” barb 16-510 8”Pop-upwith1/2”MNPT 16-511 12”Pop-upwith1/2”MNPT

speciFications: •OperatingPressure:15-35PSI (1-2.5 BAR)•OverallBodyandStemHeight: Long:13”(33cm)Short:9”(22cm)•ExtensionHeight: ° 8” Pop-Up = 5” (12 cm) Total 13” (33 cm) °12”Pop-Up=9”(22cm)Total21”(53.34cm)•FilterRequirement:120Mesh

www.digcorp.com 26

swiVel FittinGs

3⁄4” thru 2” swiVelFittinGs FormaniFold assemBly

DIG high-pressure polypropylene swivel fittings are designed for ease of assembly, repair and addition of valves without glue, pipe tape, teflon tape or special tools.

Features:

• Quickassemblyofvalvemanifolds

• Easydisassemblyforvalverepair

• Notoolsorgluerequired

• Variousconfigurationsfordifferentmanifolddesigns

• EncapsulatedNitrilrubberO-ringpreventsleaks on the swivel adapter

• Largecapscanbeeasilytightenedbyhand


23-001 SwivelendcapwithO-ring,1”F23-002 Swivel coupling, 1” F x 1” F23-003 Swivel adapter, 1” F x 1” M23-004 Swivel adapter, 1” F x 3/4” M23-005 Swivel tee, 1” F x 1” F x 1” M23-006 Swivel elbow, 1” F x 1” F23-007 Swivel street elbow, 1” F x 1” M23-008 Swivel street elbow, 1” F x 3/4” M23-009 Swivel cross, 1” F x 1” F x 1” F x 1” F23-010 Swivel cross, 1” F x 1” F x 1” F x 1” M23-011 Swivel cross, 1” F x 1” F x 1” F x 3/4” M

ORDERING INFORMATION Model Description 23-152 Swivel adapter, 1-1/2” F x 1-1/2” M 23-153 SwivelendcapwithO-ring,1-1/2”F 23-150 NipplewithO-ring,1-1/2”Mx1-1/2”M 23-202 Swivel adapter, 2” F x 2” M 23-203 Swivelendcap,withO-ring,2”F


23-012 Nipple,1”Mx1”M 23-014 Nipple,1”Mx1”MwithoneO-ring 23-015 Nipple,1”Mx3/4”MwithoneO-ringon3/4”side 23-150 NipplewithO-ring,1-1/2”Mx1-1/2”M 23-200 NipplewithO-ring,2”Mx2”M

ORDERING INFORMATIONModel Description23-302 2 outlet 1” swivel manifold23-303 3 outlet 1” swivel manifold23-304 4 outlet 1” swivel manifold

speciFications:• OperatingPressure:Upto120PSI (8.4 BAR)• TemperatureRange:Upto150°F(65°C)• AvailableSizes: °1”,11/2”and2”SwivelFNPT °3/4”,1”,11/2”and2”MNPT

Materials:

• BodyandSwivel:PolypropyleneUV

• O-ring:NitrilRubber

27 1.800.322.9146


Four and six stationirriGation andpropaGationcontrollers

Designed for residential, light commercial and propagation use, DIG 5000 series indoor controllers feature independent programming for each valve, four start times per day per valve, cycles up to 30 days, watering durations as short as 1 minute and up to 12 hours. Each offers a wide range of flexible programs and down time protection. 5000 series controllers are truly unique in their class.

Features:

•Wateringdurationsfrom1minuteto12hoursin 1 second increments

• Fourstarttimesperprogrampervalve

• 7dayprogrammingscheduleoroneto30days

° Independent programming of start time, run time and day of the week for each valve

• Automatic,semi-automaticandmanualmodesfor each program

• Raindelayupto30dayswithautorestart

• 4buttonswithlargeintegratedliquidcrystaldisplay (LCD)

• EasytoreadAM/PMclock

• One9-voltbackupbattery

• Automaticshortcircuitdetectionisolatestheshorted valve, continues irrigation cycle and gives visible alarm

• Starttimestackingpreventshydraulicoverload

•Canoperatetwovalvesatatime

• Mastervalveremotepumpstartprogram:afterprolonged power interruption, each station will operate for 10 minutes

• Rainormoisturesensorterminal hook up

Controller Dimensions:

•4”Wx1.5”Dx6.25”H (10cmWx3.8cmDx16cmH)

ORDERING INFORMATION Model Description 5004-I 4-station indoor AC controller 5006-I 6-station indoor AC controller 5006-IP 6-station indoor AC propagation controller

Materials:

• BodyandCore:ABS

Watering schedules can be set according to four different programs:

1) Standard watering cycle: weekly

2) Cyclical watering cycle: From once per 1 day up to once every 30 days

3) Repeat watering cycle: From once per 1 hour to once per 23 hours

4) Repeat watering cycles within scheduled hourly cycles, placed with a window to start and end at any time of the day.

ValVe assemBly withswiVel FittinGs

Features:

• 1”swivelinletandoutletforquickinstallation

• Operatingpressure:10-150PSI (.7-10 BAR)

• Slowclosinginternalmanualbleed

• Highflowwithlowpressureloss

• Easyin-linemaintenance

• Heavydutyglassreinforcednylonvalve

• Heavydutypolypropyleneswivelfittings

• Easytoexpandwhenaddingadditionalvalves

electricalspeciFications:• StandardVoltage:24VAC(50-60Cycles)• Current:0.32A(7.7VA)Inrush, 0.16A(3.84VA)Holding• PowerConsumption(watts):1.7/2.2

ORDERING INFORMATION Model Description P39-203 3 valve assembly P39-204 4 valve assembly

electricalspeciFications:• InputRequired:120VAC,60Hz• Output:24VAC,0.27A• MaximumOutput:0.83A• Capacity:Two24VACSolenoid Per Station• OneTerminalforSensorConnection• SensorOverride:AllowsSensorBypass Regardless of Sensor Status

speciFications:•FlowRates:.2-35GPM for EachValve(.045-8me/h)• OperatingPressure:10-150PSI (.7-10.5 BAR)•WaterTemperature:Upto150°F(65°C)• 1”FNPTSwivelInletsandOutlets• 24VAC(50-60Cycles)

Valve Dimensions:

• ThreeValveAssembly: 10.125” W x 4” H x 10.5” L (25.7cmWx10cmHx26.5cmL)

• FourValveAssembly: 13.5” W x 4” H x 10.5” L (34.3cmWx10cmHx26.5cmL)

www.digcorp.com 28


3⁄4”, 1”, 11⁄2” and 2”plastic in-line ValVes

Designed for commercial and residential use, series 33-xxx plastic in-line globe valves range in size from 3/4” to 2”. Made of reinforced nylon and non-corrosive material, the 33-xxx series designed for reliability in a variety of demanding applications.

Valve Features:

• Constructedofglassreinforcednylonwithastainlesssteelspring;non-corrosivematerials


• Normallyclosed

• Electricormanualoperation


• Smoothvalveopeningandclosingpreventspressure surge hazards

• Ruggedreinforcedandsupportedself-cleaningdiaphragm provides reliable operation even with dirty water

• Flowcontrolhandleforwaterflowadjustmentand manual shutoff

• Manualinternalbleedoverrideforopeningvalve in case of power failure without external water spill

• Highperformancesolenoidwithlowelectricalpower consumption

ORDERING INFORMATION Model Description 33-001 3/4” w/ solenoid, no flow control 33-002 1” w/ solenoid, no flow control 33-014 3/4” w/ solenoid and flow control 33-015 1” w/ solenoid and flow control

ORDERING INFORMATION Model Description 33-016 1 1/2” w/ solenoid and flow control 33-017 2” w/ solenoid and flow control

ORDERING INFORMATION Model Description 33-005 3⁄4”-20 24 vac thread solenoid

PERFORMANcEPREssuRE lOss (PsI)

Flow Rate (GPM) 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • •Size 1” 3 3 4 4.5 5 5.5 7 8.5Flow Rate 35 45 65 90 120 132 154 160Size11/2” 2.8 3.2 4.2 5.0 6.6 8.5 • •Size 2” 2.7 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR)Flow Rate (m3/h) 1 2 3 4 5 6 7 8Size3/4” 0.21 0.25 0.30 0.42 0.51 0.60 • •Size 1” 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60Flow Rate 55 10 15 20 27 30 35 36Size11/2” 0.20 0.22 0.30 0.35 0.46 0.60 • •Size 2” 0.19 0.22 0.30 0.37 0.42 0.60 0.64• Not recommended

Solenoid Features:

• Lowsensitivitytodirtandvoltagefluctuations

• Replaceableplungertip

• SiliconeO-ring

• Heavydutyconstruction

speciFications:• FlowRates: ° 3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 11/2”:20-140GPM(4.5-36m3/h) ° 2”:30-170GPM(6.8-38m3/h)• OperatingPressure:10-150PSI (.7-10.5 BAR)• TemperatureRange:Upto170°F(76.7°C)• BodyStyles:GlobeValve• 3/4”,1”,11/2”and2”FNPTInletandOutlet

Valve Dimensions:

•3/4”:4.5”Hx4.25”Lx3.125”W (11.5 cm H x 11 cm L x 8 cm W)

•11/2”:7.125”Hx6.125”Lx5.75”W (18cmHx16cmLx14.5cmW)

•2”:8.5”Hx6.125”Lx5.75”W (18cmHx16cmLx14.5cmW)

electricalspeciFications:• Solenoid:24VAC(50-60Cycles)• Current:.032A(7.7VA)• HoldingCurrent:0.16A(3.84VA)• PowerConsumption:1.7/2.2watts• SolenoidThread:3⁄4”-20UNES-2A

29 1.800.322.9146

Battery operated controllers and ValVes

ORDERING INFORMATION Model Description 9001DC Hose thread timer

ORDERING INFORMATION Model Description 9001EZC Hose thread timer

Features:

• 3/4”FHTinletandMHToutlet

• 6buttonswithlargeintegratedliquidcrystaldisplay

• EasytoreadAM/PMclockandprogram

•Wateringdurationsfrom1minuteto 11hoursand59minutes,in1minuteincrements

• 7daycalendarschedule

• Onceperdayupto30daysinweeklyorcyclicalmode

• Fourstarttimesperday

• Emergencybackupprogramof5minutesevery24 hours if no buttons are pressed after battery installation

•Weatherresistant

• Manualirrigationcycleviathecontroller

• Poweredbyone9-voltalkalinebattery

• Irrigationsuspensionoverride(rainmode)

• Lowbatteryindicator

• Batterylifeupto1year

• Usefordriporsprinklersystems

• 3yearlimitedwarranty

model 9001dcBattery poweredhose end irriGationtimer with lcddisplay

DIG’s 3/4” hose end timer has a wide range of features offering a reliable, cost effective solution for residential uses.

Materials:

• Body:ABS

• InnerParts:Acetal

Dimensions:

• 6”Wx4”Dx6.5”H (15.24cmDx16.5cmH)

speciFications:•FlowRate:Upto5.2GPMat30PSI (19.7l/hat2BAR)•TemperatureRange:38-130°F(3.33-54.45°C)•OperatingPressure:10-140PSI (.7-9.8BAR)•SolenoidMechanism: Durable Electric Motor•PowerSource:9-VoltDC (1,9-VoltAlkalineBattery)NotIncluded ° Battery Life: Up to 1 year

model 9001eZ-cBattery poweredhose end irriGationtimer

DIG’s 3/4” hose end timer has a wide range of features and offers a reliable, cost effective solution for residential uses.

Features:

• 3/4”FHTinletandMHToutlet

• 2selectorsand1buttonforeasyprogramming

• Poweredbyone9-voltalkalinebattery

• Wateringdurationsfromonceevery 3 hours to once every 14 days

• Tenpresetdurationsfrom2minutesto 9hours

° Duration can be changed after programming by setting the selector to a different setting

• Uptoeightstarttimesperday

• Programstarttimemaybedelayedinadvanceby any number of hours

•Weatherresistant

• Automaticandmanualoperationviathecontroller using the start button

• Batterylifeupto1year

• Usefordriporsprinklersystems

• 3yearlimitedwarranty

speciFications:•FlowRate:Upto5.2GPMat30PSI (19.7l/hat2BAR)•TemperatureRange:38-130°F(3.33-54.45°C)•OperatingPressure:10-140PSI (.7-9.8BAR)•SolenoidMechanism: Durable Electric Motor•PowerSource:9-VoltDC (1,9-VoltAlkalineBattery)NotIncluded ° Battery Life: Up to 1 year

Materials:

• Body:ABS

• InnerParts:Acetal

Dimensions:

• 6”Wx4”Dx61/2”H (15.24cmDx16.5cmH)

www.digcorp.com 30



740-000 4-station controller with solenoid

ORDERING INFORMATION Model Description 710-000 Single station controller with solenoid

2-wire sinGle andFour stationBattery operatedcontrollers

With contemporary design for residential and light commercial use, the 700 series battery operated controllers offer a wide range of features that include advanced, 2-wire solenoid, smaller size profile, one 9-volt battery and a host of programming features that are easy to use.

Controller Features:

• Operatesuptofourstationsandmastervalve(four station)

• 4buttonkeypadwithanintegratedlargeliquidcrystal display (LCD)

• Operatesdriporsprinklersystems


• Canoperatetwovalvessimultaneously(fourstation)

• Digitaliconindicatesstationinoperation(fourstation)

• Automatic,semi-automaticandmanualoperation

• Programmingshut-offoverride

• Independentprogrammingforeachvalve(fourstation)


• Rainsensorconnections

• Mastervalvewiresincludedwiththefourstation model

• Colorcodedwiresforeasyverification

• Withstandsharshclimaticconditions(completely sealed and waterproof)

• Canbemounteddirectlyonmostbrandnamevalves or to the wall inside an irrigation box using one of six available adapters

• Poweredbyone9-voltalkalinebatteryfeaturing low power consumption

• Programstoredforupto20secondsduringbattery change

• Compatiblewithatwo-wireS-305latchingsolenoid

• Singlestationincludesthesolenoid

• 3yearwarranty

Materials:

• Controller:ABS

• ValveBodyandCover: GlassReinforcedNylon

• Diaphragm:NylonFabricReinforcedPolyisoprene(NR)

• MetalPartsandScrews: Stainless Steel 304

Programming Features:

•Wateringdurationsin1minuteincrementsfrom 1 minute to 12 hours


• 7dayprogrammingscheduleor1-30dayintervals

•Waterbudgetfrom5-95%in5%increments

• Raindelayupto30days

• Waitingmodeforthethirdvalveinoperation(four station)

• Digitaldisplayblinkinglowbatteryindicator

speciFications• TemperatureRange:38-130°F(3-54°C)• PowerSource:9-VoltDC(1,9-Volt AlkalineBattery)NotIncluded• BatteryLife:Upto1Year

electricalspeciFications:• Two-wayMagneticLatching,NormallyClosed, Bi-Directional Pulse• CoilOperatingData:CoilResistance 5 +/- 0.03 W, Minimum Pulse 10 mS Durationat6-9Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed

31 1.800.322.9146

ORDERING INFORMATION Model Description 710-011 Single station controller with actuator



Flow Rate (GPM) 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • • Size 1” 3 3 4 4.5 5 5.5 7 8.5

Flow Rate (GPM) 20 35 45 55 65 90 120 132 154 160Size11/2” 2.5 2.8 3.2 3.2 4.2 5.0 6.6 8.5 • • Size 2” 2.7 2.8 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR) Flow Rate (m3/h) 1 2 3 4 5 6 7 8Size3/4” .21 .25 .30 .42 .51 .60 • • Size 1” .20 .23 .28 .33 .35 .39 .51 .60

Flow Rate (m3/h) 5 8 10 13 15 20 27 30 35 36Size11/2” .19 .20 .22 .23 .30 .35 .46 .60 • • Size 2” .18 .19 .20 .22 .30 .37 .42 .60 .64

• Not recommended

Dimensions:

• Controlleronly: 4.214”Hx5”Lx3.6”W

•Controllerplus3/4”and1”valves: 8”Hx5”Lx3.6”W (20 cm H x 12.7 cm L x 15 cm W)

• Controllerplus11/2”and2”valves: 10.5” H x 8.5” L x 5” W (27 cm H x 22 cm L x 12.7 cm W)

2-wire sinGle stationBattery operatedcontroller within-line ValVe andactuator

Used for a wide range of applications the 710-xxx series battery operated controller offers a flexible and simple solution for drip or sprinkler systems, areas without power and as a cost-effective repair for existing systems. The controller includes a 3/4” to 2” in-line valve or actuator to fit a 3/4” or 1” manual anti-siphon valve.

Controllers Features:• Standaloneunitincludesin-linevalveor

actuator

• Fourbuttonkeypadwithintegratedlargeliquidcrystal display (LCD)

• Operatesdriporsprinklersystem


• Automatic,semi-automaticandmanualoperation

• Programmingshut-offoverride

• Internalmanualbleedformanualon


• Rainsensorconnections

• Withstandsharshclimaticconditions(completely sealed and waterproof)

• Availablevalvesfrom3/4”to2”

• Poweredbyone9-voltalkalinebatteryfeaturing low power consumption

• Programstoredforupto20secondsduringbattery change

• Latchingsolenoidwithencapsulatedplungerand spring for reliable operation

• 3yearwarranty

ORDERING INFORMATION Model Description 710-000 Single station controller with solenoid 710-075 Single station controller with 3/4” in-line valve 710-100 Single station controller with 1” in-line valve 710-150 Single station controller with 1 1/2” in-line valve 710-200 Single station controller with 2” in-line valve




• 7dayprogrammingscheduleor1-30dayintervals

•Waterbudgetfrom5-95%in5%increments


• Digitaldisplayblinkinglowbatteryindicator

Valve Features:

• Normallyclosed

• Slowopeningandclosing

• Onepiecediaphragmwithreinforcedplastichousing for reliable, leak free valve closing



• Noncorrosivematerials

• Maxinletpressure710.011-80PSI

speciFications:• FlowRates: °3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: 2-35 GPM (.45-8 m3/h)• OperatingPressure: 10-150 PSI (.7-10.5 BAR)• TemperatureRange:Upto170°F(76.7°C)• BodyStyle:Globe• 3/4”and1”FNPTInletandOutlet

www.digcorp.com 32


uniVersal dc ValVesand actuators

DIG 305DC series in-line valves and actuators are used with the LEIT-2 and the 700 series battery operated controllers. Designed to perform in a wide range of field conditions, the 305DC series provides a reliable solution in alternative power system. These valves feature heavy-duty construction with internal manual bleed, encapsulated solenoid plunger and a supportive diaphragm, ensuring dependable operation.

Features:

• AdaptabletomanybrandnamevalvesusingDIG valve adapters

• Sealedplasticovermoldingtechniqueforwaterproof construction

• Encapsulatedplungerandspringforreliableoperation

• Internalbleed,manualoverrideformanualON/OFF

• Constructedofglassreinforcednylonwithastainless steel spring


• Normallyclosed



• Rugged,reinforcedself-cleaningdiaphragmprovides reliable operation even with contaminated water


• ManualinternalbleedoverridebeneaththeLEMA solenoid for opening the valve without external water spill

Dimensions:

• 3/4”and1”: 4.5” H x 4.25” L x 3.12” W, (11.5 cm H x 11 cm L x 8 cm W)

• 11/2”: 7.12”Hx6.12”Lx5.75”W, (18cmHx16cmLx14.5cmW)

• 2”: 8.5”Hx6.12”Lx5.75”W, (21cmHx16cmLx14.5cmW)

ORDERING INFORMATIONModel Description305DC-070 DC solenoid on 3/4” in-line valve305DC-075 DC solenoid on 3/4” in-line valve305DC-100 DC solenoid on 1” in-line valve305DC-105 DC solenoid on 1” in-line valve305DC-150 DC solenoid on 1 1/2” in-line valve305DC-200 DC solenoid on 2” in-line valve305DC-013 DC solenoiD with 3/4” and 1” actuator

Materials:

• ValveBodyandCover:GlassReinforcedNylon


• MetalPartsandScrews:StainlessSteel303

•SolenoidHousingOverMold:Nylon

•SolenoidHousingBase:Nylon

•InsideHousingStainlessSteelPart:430F

•PlungerRubberCap:EPDM

•O-ring:Buna-N

• PlungerCup:EPDM

PERFORMANcEFlOw RATE (GPM)

Flow Rate 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • • Size 1” 3 3 4 4.5 5 5.5 7 8.5 Flow Rate 35 45 65 90 120 132 154 160Size11/2” 2.8 3.2 4.2 5.0 6.6 8.5 • • Size 2” 2.7 3.1 4.3 5.3 6 8.5 9.1

Pressure Loss (PSI)FlOw RATE M3/h

Flow Rate 1 2 3 4 5 6 7 8Size3/4” 0.21 0.25 0.30 0.42 0.51 0.60 • • Size 1” 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60 Flow Rate 55 10 15 20 27 30 35 36Size11/2” 0.20 0.22 0.30 0.35 0.46 0.60 • • Size 2” 0.19 0.22 0.30 0.37 0.42 0.60 0.64

Pressure Loss (bar)

• Not recommended

170

160

150

140

130

120

110

100

90

80

70

60

0

MAXIMUM WIRE RUNS

FEET

PSI

0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500

14 AWG 12 AWG

200 300

electricalspeciFications•Two-wayMagneticLatching,Normally Closed, Bi-Directional Pulse•CoilOperatingData: ° Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed

speciFications: • FlowRate: ° 3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: .2-35 GPM (0.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”:30-160GPM(6.8-36m3/h)• OperatingPressure:10-150PSI, (.7-10.5 BAR)• MaxInletPressure:305DC-013-80PSI• TemperatureRange:Upto170°F(76.2°C)• BodyStyle:Globe• 3/4”,1”,11/2”and2”FNPTInletandOutlet

33 1.800.322.9146


s-305dc solenoidDIG’s Unimax solenoid is a two-way magnetic latching solenoid designed for use with the LEIT-2 and 710 battery operated controllers on various brand name valves using DIG’s assortment of threaded adapters. The S-305 can also operate with various 2-wire DC controllers available on the market to a distance of up to 200 ft using 14 AWG wire. The S-305 uses a sealed plastic over-molding to prevent water or contaminants from entering the solenoid housing. The normal actuation of the S-305 is via a bi-directional pulse.

Features:

• Adaptabletoawiderangeofvalvesusingourvalve adapters

• Sealedplasticovermoldingtechniqueforwaterproof construction


• InternalbleedandmanualoverrideformanualON/OFF

speciFications•WeightWithoutAdapterandHandle: 4.0 oz (113 g)•TotalWeight:4.23Oz(120g)•SolenoidThread:11/16”-12UN•OperatingPressure:10-150PSI (.7-10.5 BAR)•ControlOrifice:0.62”+/-0.001(1.6mm)•TemperatureRange:32-170°F(0-77°C)

ORDERING INFORMATION Model Description 30-920 Solenoid plastic adapter for BERMAD 200 series,HIT500series,DOROTseries80 30-921 Solenoid plastic adapter for RAINBIRDDV, DVF, PGA, PEB, GB, EFB-CP, BPE, PESB, ASVF 30-922 Solenoid plastic adapter for HUNTERASV, HPV, ICV, PGV, SRV, IBV, ASVF 30-923 Solenoid plastic adapter for WEATHERMATIC 12000, 21000 series 30-924 Solenoid plastic adapter for IRRITROL100, 200B, 205, 217B, 700 series, 2400, 2500, 2600 series, TORO220,P220series,GRISWOLD2000,DW 30-925 SolenoidplasticadapterforSUPERIOR950, HUNTERHBV,TORO252(1.5”andlarger), BUCKNERVBseries

Materials:

•SolenoidHousingOverMold:Nylon

•SolenoidHousingBase:Nylon

•InsideHousingStainlessSteelPart:430F

•PlungerRubberCap:EPDM

•O-ring:Buna-N

ORDERING INFORMATION Model Description S-305DC DC Solenoid with internal bleed and manual override 6-9 volt DC

ValVe adaptersFeatures:

• Availabletofitonawiderangeofplasticorbrass valves

• Madeofdurableplastic

Materials:

• Adapter:Nylon

• O-ring:BunaN

• Sleeve:Poly

Dimensions:

• Diameter:1.206”(max)(3.6cm)• Overalllength:2.330”(6cm)withoutadapter,

2.735 (7 cm) with adapter

170

160

150

140

130

120

110

100

90

80

70

60

0

MAXIMUM WIRE RUNS

FEET

PSI

0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500

14 AWG 12 AWG

200 300

electricalspeciFications•Two-wayMagneticLatching,Normally Closed, Bi-Directional Pulse•CoilOperatingData: ° Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed•Leads:18”(45cm)Red/White.

www.digcorp.com 34


sinGle station withactuator For 3⁄4”and 1” anti-siphonValVe and 3/4” to2” inline ValVe

The 510 series battery operated controllers convert 3/4” and 1” brass or plastic manual anti-siphon valves to automatic operation. Also available with a 3/4” to 2” in-line, normally closed valves and flow control. The 510 series is completely waterproof and is intended for outdoor installation.

Features:


• Fourstarttimesperday• 7dayprogrammingscheduleor1-30day

intervals•Waterbudgetfrom5-95%in5%increments• Automatic,semi-automaticandmanual

operation• Manualshut-off

° Flow control can adjust to off

° Internal manual bleed• Raindelayupto30days• Irrigationsuspensionoverride(rainmode)• Withstandsharshclimaticconditions

° Completely waterproof• Fourbuttonkeypadwithanintegratedliquid

crystal display (LCD)• EasytoreadAM/PMclock• Poweredbytwo9-voltalkalinebatteries

° Digital display blinking low battery indicator

° Program saves up to 20 seconds during battery change

• Slowopening/slowclosingforsmoothoperation

• 24”solenoidwirewithwaterproofconnectionto the controller

• Containsalladaptersrequiredforconversionofmost 3/4” and 1” brass or plastic manual anti-siphon valves

Materials:

• ControllerBodyandCover:ABS

• ControllerInnerParts:Acetal

• ActuatorBody:GlassReinforcedNylon

• DiaphragmandRubberSeal:EPDM

• MetalPartsandScrews: Stainless Steel 304

• SolenoidInnerMetalParts: Stainless Steel 304

• ValveBodyandCover: GlassReinforcedNylon


Dimensions:

•Controllerplus3/4”and1”valves: 8” H x 7.5” L x 3.875” W (20cmHx19cmLx9.6cmW)

• Controllerplus11/2”and2”valves: 9.5”Hx10”Lx3.875”W (24cmHx25cmLx9.6cmW)

ORDERING INFORMATIONModel Description510.011 Controller with actuator

ORDERING INFORMATIONModel Description510.075 Controller with 3/4” in-line valve510.075S Same as 510.075 with sensor connector510.100 Controller with 1” in-line valve510.100S Same as 510.100 with sensor connector510.150 Controller with 1 1/2” in-line valve510.200 Controller with 2” in-line valve


Flow Rate (GPM) 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • • Size 1” 3 3 4 4.5 5 5.5 7 8.5

Flow Rate (GPM) 20 35 45 55 65 90 120 132 154 160Size11/2” 2.5 2.8 3.2 3.2 4.2 5.0 6.6 8.5 • • Size 2” 2.7 2.8 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR) Flow Rate (m3/h) 1 2 3 4 5 6 7 8Size3/4” .21 .25 .30 .42 .51 .60 • • Size 1” .20 .23 .28 .33 .35 .39 .51 .60

Flow Rate (m3/h) 5 8 10 13 15 20 27 30 35 36Size11/2” .19 .20 .22 .23 .30 .35 .46 .60 • • Size 2” .18 .19 .20 .22 .30 .37 .42 .60 .64

• Not recommended

speciFications:• FlowRates: °3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) °2”:30-160GPM(6.8-36m3/h)• OperatingPressure: 10-150 PSI (.7-10.5 BAR)• TemperatureRange:Upto170°F(82°C)• BodyStyle:Globe• 3/4”-2”FNPTInletandOutlet

electricalspeciFications:• DryLatchingSolenoidwithManualOverride• TemperatureRange:38-130°F(3-54°C).• PowerSource:18VoltDC(2,9-Volt AlkalineBatteries)NotIncluded ° Power Draw: .2 Amps Per Cycle

° Battery Life: Up to 2 years

35 1.800.322.9146


sinGle stationpropaGation andirriGationcontroller with 3⁄4”-20 solenoid orwith in-line ValVe

Features:

•Wateringdurationsfrom1secondupto12hours in 1 second increments (510.xxxP)

•Wateringwindowscanbeprogrammedtolastfrom 1 minute to 24 hours (510.000P)

• Manualirrigationviathecontrollerforsemi-automatic operation and system testing

• Manualshutoff

° Internal manual bleed



• Withstandsharshclimaticconditions

° Completely waterproof

• Poweredbytwo9-voltalkalinebatteries

° Digital display, blinking low battery indicator

° Program stored up to 20 seconds during battery change

• Comeswitha3/4”-20solenoidormountedona 3/4” or 1” valve

• Canbeusedforirrigation(510.000)orpropagation (510.xxxP)

• Propagationcontrollers(510.xxxP)canbeusedfor misting and humidity control

ORDERING INFORMATION Model Description 510.075P Propagation controller on 3/4” valve 510.100P Propagation controller on 1” valve

Watering schedules can be set according to four different programs:

1) Standard watering cycle: Seven day calendar with four start times per day (510.000 and 510.xxxP)

2) Cyclical watering cycle: From every day up to once every 30 days (510.000 and 510.xxxP)

3) Repeat watering cycle: From 1 hour to 23 hours (510.000 and 510.xxxP)

4) Repeat watering cycle in one minute intervals with window to start at am or pm, and window to close at am or pm (510.xxxP)

ORDERING INFORMATION Model Description 510.000P Propagation controller 3/4”-20 solenoid

electricalspeciFications:• DryLatchingSolenoid• SolenoidAdaptorThread:3⁄4”-20 UNES-2A• TemperatureRange:38-130°F (3-54°C). • PowerSource:18VoltDC(2,9-Volt AlkalineBatteries)NotIncluded ° Power Draw: .2 Amps Per Cycle °BatteryLife:Upto1Year

ORDERING INFORMATIONModel Description510.000 with 3⁄4”-20 solenoid510.000S with 3⁄4”-20 solenoid and rain sensor

connector

ORDERING INFORMATION Model Description P00-997 Adapts to GB, EF, PEB,ASVF and EFB

conVersionadapters

Conversion and extension adapters for use in conjunction with battery operated controllers.

• P00-997adaptstoRAINBIRDseriesGB,PEB,ASVFandEFBvalves

www.digcorp.com 36


dc solenoid and actuator

Two-way DC solenoid with 24” three-wire cable and 3⁄4”-20 thread and actuator

Features:

• Threecolor-coded24”wiresforeasyreference

• Manualoverride

• Builtinflowcontrol

• Containsallpartsrequiredforconversiononmost 3/4” and 1” brass or plastic manual anti-siphon valves

• Slowopening/slowclosingforsmoothoperation

dc solenoid and in-line ValVeactuators

Designed to operate with four and six station battery operated controllers, series 337.xxx solenoid, actuator and in-line valves are designed for both commercial and residential use. With high flow and low friction loss, they are made of very durable plastic for reliable performance and long life.

Features:• Constructedofglassreinforcednylonwitha

stainless steel spring


• Normallyclosed



• Rugged,reinforcedself-cleaningdiaphragmprovides reliable operation even with dirty water


• Manualinternalbleedoverrideforopening valve without external water spill

Valve Dimensions:

• 3/4”and1”:4.5”Hx4.25”Lx3.125”W (11.5 cm H x 11 cm L x 8 cm W)

• 11/2”:7.125”Hx6.125”Lx5.75”W (18cmHx16cmLx14.5cmW)

•2”:8.5”Hx6.125”Lx5.75”W (18cmHx16cmLx14.5cmW)

ORDERING INFORMATIONModel Description337.075 3/4” valve with flow control337.100 1” valve with flow control337.150 1 1/2” valve with flow control337.200 2” valve with flow control

ORDERING INFORMATIONModel Description337.000 3⁄4”-20 thread DC solenoid336.013 3/4 or 1” DC actuator


Flow Rate (GPM) 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • • Size 1” 3 3 4 4.5 5 5.5 7 8.5 Flow Rate 35 45 65 90 120 132 154 160Size11/2” 2.8 3.2 4.2 5.0 6.6 8.5 • • Size 2” 2.7 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR) Flow Rate (m3/h) 1 2 3 4 5 6 7 8Size3/4” 0.21 0.25 0.30 0.42 0.51 0.60 • • Size 1” 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60 Flow Rate 55 10 15 20 27 30 35 36Size11/2” 0.20 0.22 0.30 0.35 0.46 0.60 • • Size 2” 0.19 0.22 0.30 0.37 0.42 0.60 0.64

• Not recommended

speciFications:• FlowRates: ° 3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”:30-160GPM(6.8-36m3/h)• OperatingPressure:10-150PSI(.7-10.5BAR)• DryLatchingSolenoid• TemperatureRange:Upto170°F(76.7°C)• BodyStyle:Globe• Source:18-VoltDC• 3/4”,1”,11/2”and2”FNPTInletandOutlet•SolenoidThread:3/4”-20UNES-2A

ORDERING INFORMATION Model Description 540.000W 4 station controller 560.000W 6 station controller 540.000WS 4 station with rain sensor connection 560.000WS 6 station with rain sensor connection

Four and sixstation Batteryoperatedcontrollers

Designed for multi-valve installations, series 540 and 560 battery operated controllers can power four to six valves utilizing 337.xxx DC solenoid vales and actuators. Independent programming for each valve offers maximum flexibility for a full range of watering requirements.


• Operatesuptosixvalvesplusmastervalve(four and six station)

• Fourbuttonkeypadwithanintegratedlargeliquid crystal display (LCD)

• Operatesdriporsprinklersystems• EasytoreadAM/PMclock• Canoperatetwovalvessimultaneously(four

and six station)• Digitaliconindicatesstationinoperation(four

and six station)• Automatic,semi-automaticandmanual

operation• Independentprogrammingforeachvalve(four

and six station)• Rainsensorconnectionsincludedwithmodel

510.000S and 540.000WS •Withstandsharshclimaticconditions

(completely sealed and waterproof)• Poweredbytwo9-voltalkalinebatteries

37 1.800.322.9146


leit-2 systemFor residential and commercial applications. The LEIT-2 system combines the LEIT-2 wireless irrigation controller powered by ambient light with the LEIT RC2 remote control handset. The LEIT-2 can operate up to two valves and a rain sensor using a highly efficient photovoltaic module fueled by ambient light. After installation, no further visits to the controller are required under normal conditions.


• Operatesuptotwostationswithasensorwithout AC power hookup, batteries, or conventional solar panels

• TheLEIT-2controllerusesuptotwoUnimaxS-305DC solenoids mounted on most brand name valves using one of six valve adapters

• ClientIDenablestheusertohaveauniqueidentity code for his controllers and handset security feature which locks out unauthorized users

• Non-volatilememoryretainsprogramandcontroller integrity forever (excluding time)

• Functionsdayandnightinanyweatherandmost outdoor locations

• Allpowerisprovidedbyaninternal,highlyefficientphotovoltaicmoduleandmicroelectronic energy management system fueled by ambient light

• Nodirectsunlightrequired

• Electricalprotectionforupto50volts;resistantto damage from lightning and currents from power lines

• Thecontrollersendsastoredalerttothehandset if a charging problem occurs, which then can be reviewed by the user

• Environmentallyfriendly;certifiedleadfree;uses light as a source of energy

• ThecontrolleroperatesinconjunctionwiththeRC2 two-way radio handset

• RadiofrequencyisintheISMband920MHz(868international).CEandFCCcertified

• Controllerdefaultstoaprogramof5minutesperdaywithastarttimeof9amifnotprogrammed

• Programstackingfeaturepreventshydraulicoverload

• Availablewith18”color-coded18gaugewiresfor each valve

• Dedicated18”color-codedrainsensorconnectionpromotesbetterwaterefficiency

• Builtfromtough,ruggedmaterial-resistanttoharshenvironmentalconditions;complieswithIP68requirements

Dimensions:3” W x 5 1/2” L including the antenna

Controller Accessories:

TheLEIT-2hasthreemountingconfigurationstofitany application

• Valveboxmountingwiththreedifferentcolors:green, tan and purple

• Valveclipmountingcanattachthecontrollerinto the top of the S305DC solenoid

• Columnmountingallowsthecontrollertobeabove the ground using 25” or 50” galvanized mounting column

ORDERING INFORMATIONModel Description 30-831 LEIT-2 controller plastic column attachment 30-830 LEIT-2 controller valve box dome attachment with 8 screws, green 30-832 LEIT-2 controller valve clip attachment 30-835 LEIT-2 controller valve box dome attachment with 8 screws, tan 30-836 LEIT-2 controller valve box dome attachment with 8 screws, purpleMCOL2S LEIT-2controller25”(63cm)mountingcolumnMCOL2L LEIT-2controller50”(128cm)mounting column

ORDERING INFORMATION Model Description LEIT-2 2 station controller only

speciFications:•ControllerInput:0-100,000+Lux.Normal Operation Requires Average of 3000 Lux•ControllerOutput:9-VoltPulse

www.digcorp.com 38


leit rc2 remotecontrol handset

The LEIT RC2 remote control handset communicates with up to 99 LEIT-2 controllers, or 198 valves, from a distance of 350 feet (100 m) line of sight. The RC2 remote has a large LCD display with sophisticated and intuitive icon-based software used to communicate with LEIT-2 controllers. All of the controller’s operations are controlled via the RC2 remote handset.

Handset Features:

• TheLEITRC2hasanoperatingrangeofupto350 ft (100 meters), line of sight.

• RadiofrequencyisintheISMband920MHz(868international).CEandFCCcertified

• LEITRC2handsetcanperformmanyfunctions,such as review status, check history reports, adjust budgeting, program rain delays and perform manual runs

• Largeliquidcrystaldisplaywithuserfriendlyicons for easy programming

• MultilingualsoftwareinEnglish,Spanish,Italian, French, German and Portuguese

•Whenprogramsarechangedtheusercanreview the changes identifying the handset that made the changes

• Providescontrollerstatusonconnection

• ClientIDenablestheusertohaveauniqueidentity code for his or her handset and controllers, a security feature which locks out unauthorized users

• Diagnosticsettingalertstheuserwhenthereisa problem such as a short or open valve

• Letstheuserknowthecontroller’spowerleveland alerts the user if it is not fully charged after one day.

• Environmentallyfriendly;certifiedleadfree

ORDERING INFORMATIONModel Description 30-850 LEIT, Radio RC2 handset power supply 120 VAC/60 h2, 12 VDC @ 150 mA 30-851 LEIT, Radio RC2 handset car charger, 4 ft. cable 30-852 LEIT, Radio RC2 handset holder


•Wateringdurationsfrom1minuteandupto5:59hoursin1minuteincrements

• Twoprogramswithfourstarttimesperprogram

• Customprogrammingwith7daycalendarorintervals of 1-30 days in odd/even or every day rotation

• 365daycalendarwithleapyear

• ReconnectviatheFindscreenwithuptothelast ten saved addresses

• StatusReportprovidesvariousfunctioninformation on the controller and controller programming

• HistoryReportforeachvalveprovidesoperatingtime for past and current month

• Raindelayupto99dayswithauto-restart

• MonthlyOfffeatureallowsanymonthoftheyear to be inactive

• PermanentEventsOfffeatureallowsanythreedays of the year to be inactive and will override any programs that enter that time frame

• Individualmonthlywaterbudgetingfrom10-200% in 10% increments

• Manualtestofindividualvalvesandmanualprogram

• GlobalStopcommandwillturnoffallvalveswithin radio range

Dimensions:

2 1/4” W x 5 1/2” L including the antenna

ORDERING INFORMATION Model Description LEIT RC2 Handset

electricalspeciFications:• HandsetInput:12-VoltDC• HandsetPower:3.6VNi/MH Rechargeable Cells Battery Pack•WallCharger:120VAC/60h2, 12-VoltDC@250mA

39 1.800.322.9146


leit 4000 Four, sixand eiGht stationstandard series

The LEIT® 4000 is an advanced ambient light powered, water-management irrigation controller. It is easy to use with a fast menu base and straightforward programming. Features include independent programs for each valve, monthly budgeting, rain delays and status reports for past and current months. The time-tested photovoltaic module harnesses the energy of ambient light to power the controller in any kind of weather, anywhere in the world.

Features:

• Operatesfour,six,oreightstationsandamaster valve or pump start without AC power hookup, batteries or conventional solar panels (master valve or pump start replaces station 8 when required)

• Non-volatilememoryholdsprogramsindefinitelywithoutbatteries

•Liquidcrystaldisplayiseasytoreadunderalmost any daylight conditions

• Programmingiseasyusingaself-guidingmenuand four durable sealed buttons

• Bilingualsoftware(EnglishandSpanish)

• Functionsdayornightinanyweatherandmostoutdoor locations

° All power is provided by an internal, ultrahighefficiencyphotovoltaicmoduleandmicroelectronic energy management system fueled by ambient light

° Nodirectsunlightrequired• Controllerfunctionsandoperationsare100%

tested

• Controllerwaterproofingis100%tested

• Lightningprotection;thecontrollerisfullyisolated from electrical ground, offering virtual immunity to ground currents from overhead power-lines and/or close proximity lightning strikes

• Simpletoinstall,easy-accesswireconnectoraccommodates standard irrigation wire up to 12 gauge

• Environmentallyfriendly;usescleanpower

•Manualwateringbystationorprogram

•Assignrain,moistureorfreezesensorstoanindividual valve or to the entire system using SKIT 8821-4 connector


•Wateringdurationsfrom1minuteto5hoursand59minutes

• Fourprogramswiththreestarttimesperprogram allow for mixed irrigation applications

•Customprogrammingwith7-daycalendarorintervalsof1-39daysinodd/evenoreverydayrotation


• StatusReportforeachvalveverifiesoperatingtime for past and current month


•Individualmonthlywaterbudgetingfrom 10-200% in 10% increments

ORDERING INFORMATIONModel Description4004 4 station plus MV/P4006 6 station plus MV/P4008 8 station includes MV/P

Security:

• Programmingpasswordeliminatespotentialuser error

• Passwordcanbechangedatanytimeduringprogram setup activation

• Standardstainlesssteellocksecuresweatherresistant exterior panel

Dimensions:

• 9.4”Hx5.7”Wx3.2”D (23.9cmHx14.5cmWx8cmD)

speciFications: • UnitMountsSecurelytoaRugged Galvanized Steel Mounting Column Using Stainless Steel Lock Bolts• VandalResistant,Waterproof Enclosure Fashioned From Super Tough Material Endures Extreme Hot, Cold, Wet or Dry Weather• Super-ToughLexan© Lens Protects The Photovoltaic Module From Moisture, Dust, Chemicals a nd Impact Damage•Weight:2.6lbs(1.2kg)• OperationalTemperature: 14-140°F(–10-60°C)• TemperatureRange:–40-200°F (–38-93°C)

electricalspeciFications: • ControllerInput:0-100,000+Lux.Normal Operation Requires Average of 3,000 Lux• ControllerOutput:5-VoltPulse• RemoteHandsetInput:12-Volts Using3.6-VoltNim/MH

www.digcorp.com 40


leit x, ten throuGh twenty-eiGhtstations

LEIT is an ambient light powered water-management irrigation controller. The LEIT X has a new improved menu base that allows for a wide range of irrigation programs, such as valve grouping, independent programs and more. The photovoltaic module harnesses the energy of ambient light to power the unit both day and night. Designed for sprinkler or drip systems, the LEIT X is a commercial water management controller for any type of environment and for a wide range of applications.

Features:

• Environmentallyfriendly–usescleanpower

• Operates10,12,16,20,24and28stationsplusa master valve or pump start without AC power hookup, batteries or conventional solar panels

° Terminal strip can handle 28 hot wire stations, twoMV/Pwiresandtwocommonwires


• Liquidcrystaldisplayiseasytoreadunderalmost any daylight conditions

• Programmingiseasy,usingaself-guidingmenu and four durable sealed buttons

• BilingualsoftwareinEnglishandSpanish

• Functionsdayornightinmostweatherconditions and outdoor locations

° All power is provided by an internal, ultrahighefficiencyphotovoltaicmoduleandmicroelectronic energy management system fueled by ambient light

° Nodirectsunlightisrequired• Controllerfunctionsandoperationsare100%

tested


• Lightningprotection:thecontrollerisfullyisolated from electrical ground, offering virtual immunity to ground currents from overhead power lines and/or close proximity lightning strikes

• Simpletoinstall;easyaccesswireconnectoraccommodates standard irrigation wire up to 12 guage

• Manualwateringorsemi-automaticcyclebystation with quick override

• Assignrain,moistureorfreezesensorstoanindividual valve or to the entire system using the SKIT 8821-4 adapter

• CanreplaceanyLEIT8000orSolatrolcontrollerwith 1500S or 1500E actuator

• Compatiblewithmostbrands,stylesandsizesof valves (refer to LEMA 1500S series actuator specificationsheet)


•Wateringdurationsfrom1minuteto5hoursand59minutesavailable

• Fourprogramswiththreestarttimesperprogram allowing for mixed irrigation applications

• Customprogrammingwith7-daycalendarorintervalsof1-39daysinodd/evenoreverydayrotation


• StatusReportprovidesinformationonactiveprograms or valves, month deactivations, rain stop, remote or local mode, and station short circuitifusedwithLEMA1600HEonly

• HistoryReportallowstheusertoreviewthecontroller operating history for a total watering time of each valve with overall total and manual run times. This information is available for the current month and the previous 11 months. The user can also review the current year versus previous year.

• MonthlyOffoptionallowsshut-offofirrigationfor any month of the year. All the months are active by default.

• Internalelectricaldiagnosticscandetectopenwires or short circuits. Selectable by user (deactivated by default).



• Stationcustomgroupingallowsthecontrollerto operate more than one group and any number of stations per group together (if hydraulic limitations are not exceeded).

ORDERING INFORMATIONModel DescriptionX10 10 station plus MV/PX12 12 station plus MV/PX16 16 station plus MV/PX20 20 station plus MV/PX24 24 station plus MV/PX28 28 station plus MV/P

electricalspeciFications: • ControllerInput:0-100,000+Lux.Normal Operation Requires Average of 8,000 Lux• ControllerOutput:5-VoltAlternatingPulse

speciFications: • UnitMountsSecurelytoaRugged Galvanized Steel Mounting Column Using Stainless Steel Lock Bolts• VandalResistant,Waterproof Enclosure Fashioned From Super Tough Material Endures Extreme Hot, Cold, Wet or Dry Weather• Super-ToughLexan© Lens Protects the Photovoltaic Module From Moisture, Dust, Chemicals and Impact Damage•Weight:4.9lbs(2.2kg)• OperationalTemperature:14-140°F(–10-60°C)

Dimensions:

• 12”Hx7.5”Wx4.5”D (30.4cmHx19cmWx11.4cmD)

Security:

• Programmingpasswordeliminatespotentialerror by another user

• Passwordcanbechangedatanytimeduringprogram setup

• Standardstainlesssteellocksecuresweatherresistant exterior panel

41 1.800.322.9146


leit xrc controllerThe LEIT XRC controller can be used as an individual controller or as a key component of the LEIT Link® irrigation management system. The LEIT XRC series utilizes two-way radio communication to correspond with a LEIT Link remote control handset. The XRC incorporates all the features of the earlier models of LEIT and many new features, allowing the user a wide range of flexibility using two-way communication without the requirement for AC power.

Features:


• Remoteprogrammingandmanagementcapability from LEIT Link remote control handset

° Remote control protocol allows LEIT XRC to communicate with more than one LEIT Link remote control handset

° LEIT XRC radio frequency module operates in theISMband900-928MHz(USandAustralia)(866MHzEurope)

• Operates4,6,8,10,12,16,20,24and28stations plus a master valve or pump start, without AC power hookup, batteries or conventional solar panels

° Terminal strip can handle 28 hot wire stations, twoMV/Pwiresandtwocommonwires


• Liquidcrystaldisplayiseasytoreadunderalmost any daylight conditions

• Programmingiseasy,usingaself-guidedmenuand four durable, sealed buttons


• Functionsdayornightinanyweatherandmostoutdoor locations

° All power is provided by an internal, photovoltaic module and micro-electronic energy management system fueled by ambient light

°Nodirectsunlightrequired

• Controllerfunctionsandoperationsare100%tested


• Lightningprotection:thecontrollerisfullyisolated from electrical ground, offering virtual immunity to ground currents from overhead power lines and/or close proximity lightning strikes

• Simpletoinstall,easyaccesswireconnectoraccommodates standard irrigation wire up to 12 gauge

• Environmentallyfriendly;usescleanpower

• Assignrain,moistureorfreezesensorstoanindividual valve or to the entire system using the SKIT 8821-4 adapter


•Wateringdurationsfrom1minuteto5hoursand59minutes

• Fourprogramswiththreestarttimesperprogram allow for mixed irrigation applications

•Customprogrammingwith7-daycalendarorintervalsof1-39daysinodd/evenoreverydayrotation

• StatusReportprovidesinformationonactiveprograms or valves, month deactivations, rain stop, remote or local mode, and station short circuitifusedwithLEMA1600HEonly



• Customgroupingofstationsallowsthecontroller to operate more than one group and any number of stations per group together (if hydraulic limitations are not exceeded)

• ManualRunallowsforrepeattestingofindividual valves, semi-automatic cycle by station with quick override via manual setup, skip to the next valve or run any of the programs

• HistoryReportallowstheusertoreviewthecontroller operating history for a total watering time of each valve with overall total and manual run times. This information is available for the current month and the previous 11 months. The user can also review the current year versus previous year.

• MonthlyOffoptionallowsshut-offofirrigationfor any month of the year. All the months are active by default.

• Internalelectricaldiagnosticscandetectopenwires or short circuits. Selectable by user, (deactivated by default).

ORDERING INFORMATION Model Description XRC04 4 station plus MV/P XRC06 6 station plus MV/P XRC08 8 station plus MV/P XRC10 10 station plus MV/P XRC12 12 station plus MV/P XRC16 16 station plus MV/P XRC20 20 station plus MV/P XRC24 24 station plus MV/P XRC28 28 station plus MV/P

electricalspeciFications: • ControllerInput:0-100,000+Lux.Normal Operation Requires Average of 8,000 Lux• ControllerOutput:5-VoltAlternatingPulse

www.digcorp.com 42


leit link® two-wayremote controlhandset

The LEIT Link remote control handset is a user-friendly, hand-held, two-way radio communication device that offers all the programming capabilities and features of a LEIT controller in the palm of your hand. The LEIT handset can perform manual runs, test valves, change programs, adjust budgets, review controller status, and activate programs from up to 800 ft. line of sight. This facilitates a safer working environment, while simplifying maintenance duties and walk-throughs in high traffic areas and hard to reach sites.

Features:

• TheMULTI-PRO™cancommunicatewithupto99controllers

• TheMASTER™cancommunicatewithupto 99groupsofcontrollers,eachgroupwithupto99controllers

• Thehandset’swirelesscommunicationrangeis up to 800’ line of sight


• TheremotecontrolhandsetradiofrequencymoduleoperatesintheISMband900-928MHz(USandAustralia)(868/869MHzEurope)

• Remotecontrolprotocolallowstwo-waycommunication with secure identity code

• Menubasedprogramminganduserfriendlycommands have the look, feel and functionality of programming the LEIT XRC

• Builtfromtough,ruggedmaterial,makingitresistant to harsh environmental conditions

• Rechargeablebatterywilllastforuptofourhours of continuous operation

• FCCapproval(part15ofFCCrulesforspreadspectrum, intentional radiators, and part 15 subCspecification)

ORDERING INFORMATION Model Description LEITLinkMULTI-PRO™ Upto99controllers LEIT Link MASTER™ 99 controllers with 99 groups


The Handset Read and Modify:

• RainStop

• Budget

• PM/VLocation

• Time/Date

• ActivePrograms

• Sensor

• WateringSchedule

• MonthStop

• WireIntegrity

• LEITLinkhandsetcanreviewstatusreports,modify settings and temporarily interrupt a running program to do a manual run, test a valve or skip to next valve mode.

• Thecurrentlyrunningprogramandcurrentvalveopeninformationisprovidedonfirstcontact.

• InStatusReportmodethehandsetcanreviewtime, date, revised budgets, sensor activation (if rain stop is active), and solenoid integrity for open or short circuit.

• TheHistoryReportreviewshourlyusageofeach valve for a period of up to twelve months.

electricalspeciFications: • HandsetInput:12-Volts• HandsetPower:3.6-VoltNi/MH Rechargeable Cells Battery Pack•WallCharger:120VAC/60h2,12-VoltDC @250mA(included)

Dimensions:

• 8.6”Hx4.0”L(21cmHx10.1cmL)includingthe antenna

43 1.800.322.9146


lema 160he ValVesThe 160HE is a high performance, high flow in-line valve with a solenoid actuator that is used with the LEIT 4000, X and XRC controllers for all types of commercial applications.

Features:

• AdaptabletomanybrandnamevalvesusingDIG valve adapters

•Waterproofconstruction:sealedplasticovermolding



• Constructedofglassreinforcednylonwithastainless steel spring

• Highflowwithlowpressureloss• Normallyclosed• Easyin-linemaintenance• Smoothvalveopeningandclosingprevents

pressure surge hazards• Rugged,reinforcedself-cleaningdiaphragm

provides reliable operation even with contaminated water


• ManualinternalbleedoverridebeneaththeLEMA solenoid for opening the valve without external water spill

Valve Dimensions:

• 3/4”and1”:4.5”Hx4.25”Lx3.12”W, (11.5 cm H x 11 cm L x 8 cm W)

• 11/2”:7.12”Hx6.12”Lx5.75”W, (18cmHx16cmLx14.5cmW)

• 2”:8.5”Hx6.12”Lx5.75”W, (21cmHx16cmLx14.5cmW)

PERFORMANcEFlOw RATE (GPM)

Flow Rate 5 9 13 18 22 26 31 35Size3/4” 3 3.5 4.2 6 7.2 8.5 • • Size 1” 3 3 4 4.5 5 5.5 7 8.5 Flow Rate 35 45 65 90 120 132 154 160Size11/2” 2.8 3.2 4.2 5.0 6.6 8.5 • • Size 2” 2.7 3.1 4.3 5.3 6 8.5 9.1

Pressure Loss (PSI)FlOw RATE M3/h

Flow Rate 1 2 3 4 5 6 7 8Size3/4” 0.21 0.25 0.30 0.42 0.51 0.60 • • Size 1” 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60 Flow Rate 55 10 15 20 27 30 35 36Size11/2” 0.20 0.22 0.30 0.35 0.46 0.60 • • Size 2” 0.19 0.22 0.30 0.37 0.42 0.60 0.64

Pressure Loss (bar)

• Not recommended

ORDERING INFORMATIONModel Description160HE-075 Standard actuator on 3/4” in-line valve160HE-100 Standard actuator on 1” in-line valve

ORDERING INFORMATIONModel Description160HE-150 Standard actuator on 1 1/2” in-line valve160HE-200 Standard actuator on 2” in-line valve

Materials:

• ValveBodyandCover:GlassReinforcedNylon


• MetalPartsandScrews:StainlessSteel303

• SolenoidHousing:Nylon

• SolenoidStainlessSteelParts:430F

• PlungerCup:EPDM

170

160

150

140

130

120

110

100

90

80

70

60

0

MAXIMUM WIRE RUNS

FEET

PSI

0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500

14 AWG 12 AWG

speciFications: • FlowRate: ° 3/4”:.1-28GPM(.23-6.4m3/h) ° 1”: .2-35 GPM (0.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”:30-160GPM(6.8-36m3/h)• OperatingPressure:10-150PSI, (.7-10.5 BAR)• TemperatureRange:Upto170°F(76.2°C)• BodyStyle:Globe• 3/4”,1”,11/2”and2”FNPTInletandOutlet• ValveThread:.75”-20UNES-2A• SolenoidThread:11⁄16”-12UN

www.digcorp.com 44


lema 1600he solenoidDIG LEMA 1600HE is an encapsulated, zero maintenance, high efficiency, watertight, two-way magnetic solenoid actuator that requires minimal power, for use with the LEIT X and 4000 series controllers. The LEMA 1600HE can replace conventional solenoids on most valves, enabling the LEIT irrigation controllers to operate most brand name valves using DC power at a long distance of up to 4500 ft using 14 AWG wire.

Features:

• DesignedtoworkwithLEIT4000andLEITXorXRC controllers only

• AdaptabletoawiderangeofvalvesusingDIGvalve adapters

•Waterproofconstruction:sealedplasticovermolding



• Surgeprotectedwithbuiltinselfdiagnosticcapability for short wire or open wire failure

• Uses18gaugetwocolor-coded18”wires

speciFications:•SolenoidActuatorThread: 11⁄16”-12UN•PressureRange:10-150PSI (.7-10.5 BAR)•ControlOrifice:0.62”±0.001(1.6mm)•PilotFlow:Minimum.075GPMat 80PSI(2.83l/hat5.6BAR)•Temperature:32-170°F(0-77°C)•Weight(WithoutAdapter,Handle and Electronics): 4.0 oz. (113 g)•TotalWeight:.4lbs•Leads:18”(45cm)AWM101518 AWGVW-RedandWhiteWires

170

160

150

140

130

120

110

100

90

80

70

60

0

MAXIMUM WIRE RUNS

FEET

PSI

0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500

14 AWG 12 AWG

ORDERING INFORMATION Model Description LEMA 1600 HE Solenoid with internal bleed manual override

ValVe adapters• Availableforawiderangeofplasticorbrass

valves

• Madeofdurableplastic

Materials:

• Adapter:Nylon

• O-ring:Buna-N

• Sleeve:Poly

Materials:

• PCBoardHousing:ABS

• SolenoidHousingOverMold:Nylon

• SolenoidHousingBase:Nylon

• InsideHousingStainlessSteelPart:430F

• PlungerRubberCap:EPDM

• O-ring:Buna-N

Dimensions:

• Length:2.33”(6cm) (without adapter, handle and electronics)

• Diameter:1.206”(3.6cm)

ORDERING INFORMATION Model Description 30-920 Solenoid plastic adapter for BERMAD 200 series,HIT500series,DOROTseries80 30-921 Solenoid plastic adapter for RAINBIRDDV, DVF, PGA, PEB, GB, EFB-CP, BPE, PESB, ASVF

30-922 Solenoid plastic adapter for HUNTERASV, HPV, ICV, PGV, SRV, IBV, ASVF 30-923 Solenoid plastic adapter for WEATHERMATIC 12000, 21000 series 30-924 Solenoid plastic adapter for IRRITROL100, 200B, 205, 217B, 700 series, 2400, 2500, 2600 series, TORO220,P220series,GRISWOLD2000,DW 30-925 SolenoidplasticadapterforSUPERIOR950, HUNTERHBV,TORO252(1.5”andlarger), BUCKNERVBseries

45 1.800.322.9146



ENCLX LEITXandXRCseriesstainlesssteel enclosure


ENCL4000 LEIT4000seriesstainlesssteelenclosure

stainless steelenclosure

Though LEIT irrigation controllers are manufactured with a vandal resistant case, some customers may desire additional protection. DIG’s stainless steel enclosures come in two sizes to fit either the LEIT 4000 or the LEIT X series controllers. Each enclosure is made out of the highest quality stainless steel and offers top of the line weather and vandal resistance.

Enclosure Features:

• Manufacturedusingthehighestqualitystainless steel material

•Weatherproof,rustproofandextremelydurable

• Griddesignontopensureslightaccesstophotovoltaic valves

• Easytoinstallwithastandard3/8”socketwrench

• Installationoftheenclosuredoesnotrequirethecontrollertoberemovedormodifiedinanyway

• Airflowholesontopandbottomofeachenclosure control the temperature inside

leit key

Features:

• TheLEITkeyispoweredbya9-voltbatteryandprevents unauthorized access to the controller’s schedule and programs

• Easyinstallationofone9-voltbattery(notincluded with the unit)


LEITKEY ProgrammingtooltoenterLEITcontroller

Security:

• Heavy-dutystainlesssteelprovidesmaximumstrength

• Internalhingeeliminatesforcefulremovalofthe door

• Stainlesssteelmountingclampisonlyaccessible from inside the enclosure, so no unauthorized removal of the enclosure is possible

• Eachenclosurecomeswithahighsecuritystainless steel disc-lock to ensure only authorized access to the controller

speciFications • 14AWG304StainlessSteelCase• Dimensions: ° 4000 Series: 10.8” H x 7.5” W x 3.8” D (27.4cmHx19cmWx9.6cmD) ° X Series: 14”Hx8.7”Wx6”D (35 cm H x 22 cm W x 15 cm D)•Weight: ° 4000Series:6.2lbs(2.8kg) ° XSeries:10.9lbs(5kg)

www.digcorp.com 46



MCOL4000Mountingcolumn32”(81cm)short MCOL4000LMountingcolumn48”(124cm)long MCOLXS Mountingcolumn35”(89cm)short MCOLXL Mountingcolumn51”(129cm)long

mountinG columnMounting column designed with a curved bottom to allow easy access to the actuator wires. Available in two sizes, for LEIT 4000 and LEIT X.

Features:

• Mountingcolumnsareavailablewithtwodifferent OD: small OD for the 4000 series and larger OD for the LEIT X series

• Includesmountingkit

switch type sensoradapter

TheweatherproofSKITswitch-typesensor adapter provides a quick, reliable way to connect compatible rain, freeze, moisture and other normally closed switch-type sensors either directly to the LEIT series of irrigation controllers or directly to one of the series of micro-power actuators.

Features:

•Waterproofconstruction

• Easytoinstall

• Adaptstoawiderangeofsensors

Sensor Recommendation:

• RecommendedrainsensorsaretheHUNTER Mini-Clik II, Model 502 and the RAINBIRD RSD.

• RecommendedmoisturesensorsaretheIRROMETER RA and TGA series.

• RecommendedfreezesensoristheHUNTER Freeze Click.


SKIT8821-4 4sensoradapter


RKIT8810SRelayinterfaceforstandardstations

relay interFace kitTheRKITrelayinterfaceprovidesasimple, reliable, waterproof way to switch a relay of an AC or DC circuit. The LEIT series controllers can be used to turn a pump on and off. To enable the LEIT controller to use the RKITtoturnonapump,theRKITmust be connected to the station connector strip unit labeled MV/P. If any other AC or DC equipment is needed for relay switching, it can be connected to any other available station connector strip.

Features:

•Waterproofconstruction

• Easytoinstall

Choosing the Correct RKIT Model:

• TheRKIT8810SisusedforinstallationwithaLEIT 4000, LEIT X, and XRC

speciFications: 4000 Series:• ColumnWeight: ° Short:Approx.9lbs(4.1kg) ° Long:Approx.13.5lbs(6.1kg) X Series:• ColumnWeight ° Short: Approx. 11 lbs (5 kg) ° Long:Approx.14lbs(6.3kg)

Material:

• GalvanizedSteel

speciFications: • CompatiblewithNormallyClosed Switch Type Sensors Only • Comeswith12”12GaugeWire• Length:Approx.1.25”(3.1cm)• Diameter:Approx.0.75”(1.9cm)• Weight:Approx.2oz(56g)

electricalspeciFications: • HighPowerV2PulseInput• RatedLoad10A,250ACor30VDC• MaxVoltage380VAC125VDC

speciFications: • Length:Approx.1.9”(4.7cm)• Diameter:Approx.1.1”(2.7cm)• Weight:Approx.8oz(220g)

47 1.800.322.9146

Vol PSI Vol PSI Vol PSI GPM GPH F.P.S. Loss F.P.S. Loss F.P.S. Loss

0.05 3.0 1.3 4.77 0.8 1.62 0.7 1.07 0.10 6.0 2.6 17.20 1.6 5.86 1.4 3.86 0.15 9.0 3.9 36.45 2.5 12.4 2.1 8.16 0.20 12.0 5.2 62.06 3.3 21.12 2.8 13.90 0.25 15.0 6.5 93.77 4.1 31.91 3.5 21.01 0.30 18.0 7.8 5.0 44.71 4.2 29.43 0.35 21.0 9.1 5.8 59.47 4.9 39.14 0.40 24.0 10.4 6.7 76.13 5.6 50.11 0.50 30.0 13.1 8.3 115.04 7.0 75.72 0.60 36.0 15.6 10.0 161.18 8.4 106.1 0.70 42.0 18.2 11.7 214.37 9.8 141.11 0.80 48.0 20.8 13.4 274.44 11.2 180.58 0.05 3.0 1.3 9.54 0.8 3.24 0.7 2.13 0.10 6.0 2.6 34.4 1.6 11.71 1.4 7.71 0.15 9.0 3.9 72.89 2.5 24.80 2.1 16.32 0.20 12.0 5.2 124.11 3.3 42.23 2.8 27.8 0.25 15.0 6.5 187.53 4.1 63.82 3.5 42.01 0.30 18.0 7.8 5.0 89.42 4.2 58.86 0.35 21.0 9.1 5.8 118.93 4.9 78.28 0.40 24.0 10.4 6.7 152.25 5.6 100.22 0.50 30.0 13.1 8.3 230.07 7.0 151.44 0.60 36.0 15.6 10.0 322.36 8.4 212.20 0.70 42.0 18.2 11.7 428.74 9.8 282.22 0.80 48.0 20.8 13.4 548.89 11.2 361.16

Polyethylene (PE) Tubing Size 1/2” 1/2” 1/2” 5/8” 3/4” 1” ID 0.520 0.600 0.620 0.720 0.830 1.060 OD 0.620 0.700 0.710 0.830 0.940 1.200 Wall Thick 0.050 0.050 0.045 0.055 0.055 0.070 Vel. P.S.I Vel. P.S.I. Vel. P.S.I. Vel. P.S.I. Vel. P.S.I. Vel. P.S.I. GPM F.P.S. Loss F.P.S. Loss F.P.S. Loss F.P.S. Loss F.P.S. Loss F.P.S. Loss

head loss charts

Head Loss Per 100 feet of distribution tubing (PSI/100 ft.)

FRIcTION lOss chARTs

0.25 0.38 0.09 0.28 0.04 0.27 0.04 0.20 0.02 0.15 0.01 0.09 0.00 0.50 0.75 0.32 0.57 0.16 0.53 0.14 0.39 0.07 0.30 0.02 0.18 0.01 0.75 1.13 0.68 0.85 0.34 0.80 0.29 0.59 0.14 0.44 0.07 0.27 0.02 1.00 1.51 1.17 1.13 0.58 1.06 0.50 0.79 0.24 0.59 0.12 0.36 0.04 1.25 1.89 1.76 1.42 0.88 1.33 0.75 0.98 0.36 0.74 0.18 0.45 0.06 1.50 2.26 2.47 1.70 1.23 1.59 1.05 1.18 0.51 0.89 0.25 0.54 0.08 1.75 2.64 3.29 1.98 1.64 1.86 1.40 1.38 0.67 1.04 0.34 0.64 0.10 2.00 3.02 4.21 2.27 2.10 2.12 1.79 1.57 0.86 1.18 0.43 0.73 0.13 2.25 3.39 5.23 2.55 2.61 2.39 2.22 1.77 1.07 1.33 0.54 0.82 0.16 2.50 3.77 6.36 2.83 3.17 2.65 2.70 1.97 1.31 1.48 0.65 0.91 0.20 2.75 4.15 7.59 3.12 3.78 2.92 3.22 2.16 1.56 1.63 0.78 1.00 0.24 3.00 4.53 8.91 3.40 4.44 3.18 3.79 2.36 1.83 1.78 0.92 1.09 0.28 3.25 4.90 10.34 3.68 5.15 3.45 4.39 2.56 2.12 1.92 1.06 1.18 0.32 3.50 5.28 11.86 3.97 5.91 3.71 5.04 2.75 2.43 2.07 1.22 1.27 0.37 3.75 5.66 13.48 4.25 6.72 3.98 5.73 2.95 2.77 2.22 1.38 1.36 0.42 4.00 6.04 15.19 4.53 7.57 4.25 6.45 3.15 3.12 2.37 1.56 1.45 0.47 4.50 6.79 18.89 5.10 9.41 4.78 8.03 3.54 3.88 2.67 1.94 1.63 0.59 5.00 7.54 22.96 5.67 11.44 5.31 9.76 3.94 4.71 2.96 2.36 1.82 0.72 5.50 8.30 27.39 6.23 13.65 5.84 11.64 4.33 5.62 3.26 2.91 2.00 0.86 6.00 9.05 32.18 6.80 16.04 6.37 13.67 4.72 6.61 3.55 3.31 2.18 1.01 6.50 9.81 37.32 7.37 18.60 6.90 15.86 5.12 7.66 3.85 3.84 2.36 1.17 7.00 10.56 42.82 7.93 21.34 7.43 18.19 5.51 8.79 4.15 4.40 2.54 1.34 7.50 11.32 48.65 8.50 24.25 7.96 20.67 5.90 9.99 4.44 5.00 2.72 1.52 8.00 12.07 54.83 9.07 27.33 8.49 23.30 6.30 11.25 4.74 5.63 2.90 1.71 8.50 12.83 61.34 9.63 30.57 9.02 26.06 6.69 12.59 5.03 6.30 3.09 1.92 9.00 13.58 68.19 10.20 33.99 9.55 28.98 7.08 14.00 5.55 7.01 3.27 2.13 9.50 14.33 75.37 10.77 37.57 10.08 32.03 7.48 15.47 5.63 7.75 3.45 2.36 10.0 15.09 82.88 11.33 41.31 10.61 35.22 7.87 17.01 5.92 8.52 3.63 2.59 11.0 16.60 98.89 12.47 49.29 11.68 42.02 8.66 20.30 6.51 10.16 3.99 3.09 12.0 18.11 116.2 13.60 57.90 12.74 49.36 9.44 23.85 7.11 11.94 4.36 3.63 13.0 19.62 134.7 14.73 67.16 13.80 57.25 10.23 27.66 7.70 13.85 4.72 4.21 14.0 15.87 77.04 14.86 65.67 11.02 31.72 8.29 15.88 5.08 4.83 15.0 17.00 87.54 15.92 74.63 11.81 36.05 8.88 18.05 5.45 5.49 16.0 18.13 98.65 16.98 84.10 12.59 40.63 9.48 20.34 5.81 6.19 18.0 19.11 104.6 14.17 50.53 10.66 25.30 6.54 7.69 20.0 15.74 61.42 11.84 30.75 7.26 9.35 22.0 17.31 73.27 13.03 36.68 7.99 11.16 24.0 18.89 86.08 14.21 43.10 8.71 13.11 26.0 15.40 49.99 9.44 15.20 28.0 16.58 57.34 10.17 17.44 30.0 17.77 65.15 10.89 19.82 32.0 18.95 73.43 11.62 22.33 34.0 12.35 24.99 36.0 13.07 27.78 38.0 13.80 30.70 40.0 14.52 33.76 42.0 15.25 36.95 44.0 15.98 40.28 46.0 16.70 43.74 48.0 17.43 47.32 50.0 18.16 51.04 55.0 19.97 60.89 60.0 65.0 70.0Note:Shadedareasofchartindicatewherevelocitiesexceed5ft.persecond.Usewithcaution.

Distribution Tubing Size 1/8” Vinyl 1/4” Vinyl 1/4” Poly ID 0.125 0.156 0.170 OD 0.187 0.245 0.250 Wall Thick 0.031 0.045 0.040

Head Loss Per 50 feet of distribution tubing (PSI/50 ft.)

Head Loss Per 100 feet of polyethylene tubing (PSI/100 ft.)

www.digcorp.com 48

charts and Formulas

1

9

3

2

6

11

10

4

5

78

T.O.P. 12 ZOnE DRIP HEAD-BA

ORDERING INFORMATION Model Description 41-004 TakeOneLiterature 41-014 Specification Drawings CD 26-405 Specifications, LEIT 4000 26-406 Specifications, LEIT X and XR 26-407 Specifications,TOP 26-408 LEIT-2 Specifications

LEIT 4000 and 4000E Controllers

Typical Installation

Drawing File No.: LEIT 4000.exe

LEIT X and XR Controllers

Typical Installation

Drawing File No.: LEIT X.exe

150S- 150, 200, 1-1/2” and 2” REMOTE CONTROL VALVEASSEMBLY

RAIN SENSOR ASSEMBLYCOLUMN MOUNTED

T.O.P. 12-Outlet Drip HeadTypical Installation

Drawing File No.: TOP.exe

T.O.P. 12-ZONE DRIP HEAD USING1/4” DISTRIBUTION TUBING

3/4” REMOTE CONTROL VALVE ASSEMBLY



cAlculATING DRIPlINE DEsIGN FORMulAs

Dripline application rate calculation:231.1 x emitter flow rate (GPH)

Dripline spacing (in.) x drip spacing (in.)

Calculating flow rate per zone or line:number of emitters x flow rate per emitter

(GPH)60

Calculate number of drippers per zone:Total dripline length (feet) x 12

Drip emitter spacing (inch)

cONvERsION chARTs

cataloGs andspeciFication sheets

Specification sheets and catalogs are available to assist in the design and planning process. These documents are also available on our website in PDF format at www.digcorp.com.

TO CONVERT INTO MULTIPLY BY

FlOw RATEU.S. GPH liter/hour 3.785U.S. GPM liter/hour 227.1U.S. GPM cu. feet/second 0.002228U.S. GPM m3/hour .2273liter/second U.S. GPM 15.85liter/second U.S. GPH 951.002liter/second m3/hour 3.6liter/hour U.S. GPH 0.26417liter/hour U.S. GPM 0.004403m3/h U.S. GPM 4.40288cu. feet/second m3/h 101.9m3/h cu. feet/second 0.00981cubic feet gallons 7.4805

PREssuRE/hEADP.S.I. bar 0.07031P.S.I. meter 0.7031P.S.I. feet 2.307feet atm 0.02919feet P.S.I. 0.4335feet bar 0.03048meter P.S.I. 1.422meter atm 0.0967atm bar 1.0336atm meter 10.336atm bar 1.01365atm P.S.I. 14.7bar P.S.I. 14.504bar atm 0.9865bar bar 1.0197bar P.S.I. 14.223bar feet 32.81

wEIGhTounce gram 28.36lbs ounce 16kg lbs 2.20464

ENERGyfoot candle Lux 10.764

TEMPERATuRECelsius Fahrenehit (1.8)+32Fahrenheit Celsius (F-32):1.8

TO CONVERT INTO MULTIPLY BY

lENGThinch feet 0.08333feet cm 30.48feet yard 0.3333yard meter 0.9144mile meter 1609.344mile yard 1760inch cm 2.54mm inch 0.03937meter inch 39.3701cm inch 0.3937cm yard 0.1094cm feet 0.03281cm meter 0.01cm milimeter 10

AREAsquare inch square feet 0.00694square inch square cm 6.4516square feet square cm 929.03square feet square meter 0.0929square feet square inch 144square yard square meter 0.836square yard square inch 1296square yard square feet 9square mile square km 2.59square mile acre 640acre square feet 43560acre square yard 4840square cm square inch 0.155square meter square feet 10.7639square meter square yard 1.196square km square mile 0.3861acre hectare 0.404686acre-feet square feet 325,851acre-feet cubic feet 43560acre-feet meter (cubed) 1233.5acre square meter 4047

vOluMEU.S. gallon cubic inch 231U.S. gallon cubic feet 0.13368U.S. gallon liter 3.7854U.S. gallon cubic meter 0.0037854U.S. GPM m3/h 0.22715cubic inch cubic cm 16.3871cubic inch U.S. gallon 0.004329cubic feet cubic inch 1728cubic feet liter 28.32cubic meter U.S. gallon 264.172

HP/U.S. HP/metric 1.014HP/metric HP/U.S. 0.986HP/U.S. kilowatt 0.7457

AREA EquIvAlENTs1 acre = 43,560 ft squared = 4840 yd 2 = 0.4047 hectares = 160 rods squared = 4047 m 2 = 0.0016 sq. mile1 acre-inch = 102.8 m 3 = 27,154 gal = 3630 ft 31 hectare (ha) = 10,000 m 2 = 100 are = 2.471 acres = 107,639 ft squared1 cubic foot (ft 3) = 1728 in 3 = 0.037 yd 3 =0.02832 m 3 = 28,320 cm 31 square foot (ft 2) = 144 in 2 = 929.03 cm 2 = 0.9290 m 21 square yard (yd 2) = 9 ft 2 = 0.836 m 21 cubic yard (yd 3) = 27 ft 3 = 0.765 m 3

FlOw EquIvAlENTs1 gpm = 0.134 ft 3/minute1 ft (cubed) /min (cfm) = 449 gal/hr (gph) = 7.481gal/min

uNITs sq. In. sq. Ft. sq. yd. sq. cm sq. msq. In 1 0.006944 0.0007716 6.452 0.000645sq. Ft. 144 1 0.1111 929 0.0929sq. yd. 1296 9 1 8361 0.8361sq. cm 0.155 0.001076 0.0001196 1 0.0001sq. m 1550 10.76 1.196 10,000 1

49 1.800.322.9146

warranty

DIG Corporation warrants to its customers who have purchased DIG professional irrigation products from an authorized DIG distributor. We guarantee the products are free from original defects in material and workmanship under normal uses from the date of original manufacturefor:

LEITcontrollers:3yearsLemasolenoidsandaccessories:3 yearsLEIT-2systemandaccessories:3 yearsBatteryoperatedcontrollers:3 yearsFilters, drip irrigation and accessories:3years¼”(4mm)Dripline:3years½”(16-17mm)Dripline:4yearsDriptubing:5years

If any apparent defect arises under normal use and service in the DIG product within the warranty period,DIG at its sole discretion, shall have the option to repair or replace part or all of the original product, free of charge after return of such product at user expense, authorized in writing by DIG Corporation. If a product is replaced, the nreplacement product will be covered for the remainder of the warranty period dating from the original purchase. This warranty

applies only to the DIG Corporation professional irrigation products, which are installed as specified and used for irrigation purposes. This warranty applies only to products, which have not been altered, modified, damaged, misused nor misapplied. This warranty does not coverproducts adversely affected by thesystem into which the products are incorporated, including improperly designed, installed, operated, or maintained systems. This warranty does not apply to blockage of solenoids, valves, drip line, drippers and micro sprinklers due to use of water containing corrosive chemicals, electrolytes, sand, dirt, silt, rust, scale, algae, bacterial slime or other organic contaminants. Tampering with a product (including, but not limited to attempting to disassemble a LEIT controller) will void any warranty the product might otherwise be eligible for. In no event shall DIG’s liability exceed the selling price of the product. DIG is not liable for consequential, incidental, indirect or special damages, including but not limited to the labor to inspect, remove or replace products, vegetation loss, loss of energy or water, cost of substitute equipment or services, property damage, loss of use or lossofprofits;norisDIGliableforeconomic losses, consequential damages or damage to property

arising out of installer’s negligence or based on strict liability in tort. The user and/or trade customer agrees to the limitations and exclusions of liability of this warranty by purchase or use of DIG products. Norepresentative,agent,distributoror other person has the authority to waive, alter, or add to the printed provisions of this warranty, or to make any representation of warranty not contained here. Some states do not permit the exclusion or limitation of incidental or consequential damages or of implied warranties. Therefore, some of the above exclusions or limitations may not apply to you. This warranty on DIG professional irrigation products is given expressly and in place of all other expressed or implied warranties of merchantability and fitness for a particular purpose, and this warranty is the only warranty on the professional irrigation products made by DIG Corporation. For more information please see your DIG Corporation distributor or write to DIG Corporation, 1210 Activity Drive, Vista, CA 92081 USA. Copyright 2003-2007 DIG Corporation. All rights reserved. LEIT, LEIT Link name and logo are registered trademarks and LEIT X, LEIT XR, LEIT XRC and DIG logo are tradenames of DIG Corporation.

Copyright 2003-2009 DIG Corporation. All rights reserved. LEIT, LEIT Link name and logo are registered trademarks and LEIT X, LEIT XR, LEIT XRC and DIG logo are tradenames of DIG corporation.

customer satisFaction

• ProfessionalSalesTeam

• KnowledgeableCustomerService Staff

• PersonalTechnicalAssistance

• ExtensiveWebSupport

Customer Satisfaction is the cornerstone of DIG’s philosophy. Your success with our products determines the future of our company. We are prepared to help answer your questions through each step of implementing your irrigation projects. We have people available to give advice when designing your systems, ordering products, and implementing projects.

Sales TeamDIG’s professional, experienced sales team is ready to assist you with all of your irrigation needs, from design questions to on site training. Our knowledgeable salespeople are available to answer questions and make recommendations using DIG products through all stages of your project.

Customer ServiceDIG’s courteous, knowledgeable customer support department is on hand to provide a personal touch to the order and delivery process. Our goal is to know our customers and fulfill the customer’s needs and requirements. From data entry to the moment the product arrives at your door DIG’s customer support is at your service.

Technical AssistanceTechnical assistance is just a phone call away. DIG’s tech support department is versed not only in the DIG product line but experienced in most irrigation product lines. Our department is managed by experienced landscape and irrigation contractors who understand the need for a quick response and accurate information. We are ready to assist you at 800-322-9146 or e-mail [email protected]

On-Line Technical Informationa wealth of information regarding DIG products is available on-line at www.digcorp.com This valuable reference contains on-line catalogs, CaD details, specifications, programming instructions, instruction manuals, installation guides, and parts lists, all in an easy to access format.

www.digcorp.com 50

Documents

Comm_Catalog_10_22