22 - 26 Mar 2020, Dubai

13 - 17 Dec 2020, Dubai

“REP logo, PMI & PMP are registered trademarks of Project Management Institute, Inc.”

ApprovedCentre

Concrete Structure Designingfor Industrial Projects

Introduction

Reinforced concrete structures are widely used in industrial

sector, especially in the onshore oil and gas fields. In industrial

projects, the structure design applications are different than

normal housing projects taught in educational / engineering

institutions. This GLOMACS Concrete Structure Designing for

Industrial Projects training course will fill the gap between the

academic knowledge and the professionalism for industrial

project design in general, and specifically for oil & gas and power

generation projects.

The basis of design for concrete structure for strength,

serviceability and robustness is considered in the course.

ACI, Eurocodes, UBC and ASCE codes will also be covered to

enable the participants choose suitable design method to

serve business safety and operability. The probability of failure,

specifically in ACI and Eurocodes, will be discussed and the key

steps in design and review design will be illustrated.

This GLOMACS training course on Concrete Structure Designing for Industrial Projects will feature:

• Review of Different Codes and Standards

• The Importance of Construction and Maintenance

• The Dynamic Analysis and Design for Concrete in the

Industrial Plant

• Industry Practice in the Structure Design

• Integration between Different Disciplines in Designing

• Effect of Sustainable Design to Enhance Project

Investment Lifecycle

Objectives

This GLOMACS training course is intended to provide the participants with:

• An overview of modern and effective procedures for the

design of reinforced concrete structures in the Oil & Gas

industry

• Knowledge on calculation for reinforced concrete

elements used in the Oil & Gas industry

• Increase the knowledge and assist in using new tools for

designing and reviewing the design for new project or

modify the existing one

• Knowledge on the design of foundation under all types of

vibrating equipment, and the blast design of buildings

• An illustration of real design issues that may assist the

designer to provide concrete structure that is safe,

economical and constructible

• The rule of thumb to check the concrete design with

associated check list

TRAINING METHODOLOGY

This GLOMACS Concrete Structure Designing for Industrial

Projects training seminar will utilise a variety of proven adult

learning techniques to ensure maximum understanding,

comprehension and retention of the information presented.

The daily workshops will be highly interactive and participative.

Videos and photos will be used for illustration.

Organisational Impact

• Reduce the engineering cost as the attendees will be

capable to do engineering in-house

• Reduce cost for repair and maintenance by enhancing

the repair methodology

• Improve the organization performance by knowing

the Up to date design and construction technique its

technical practice

• Improve the project cost and time by better controlling

the design stage

Personal Impact

• Enhance the concrete design capability of the trainee for

different foundation types

• Increase knowledge of up to date of execution phase

• Increase the skill for maintenance approach

• Increase the skill to enhance quality of all phases of the oil

and gas projects

Who Should Attend?

This GLOMACS Concrete Structure Designing for Industrial

Projects training course is intended to provide professionals

and engineers to be familiar with American Concrete Institute

Standard (ACI) and Eurocodes for concrete structure designing.

This GLOMACS training course will also be beneficial for junior

or senior level civil and structure engineers who need to have

in-depth knowledge about the structural engineering activities

and how to co-operate in the design phase.

Concrete Structure Designingfor Industrial Projects

DAY 1

• The Fundamentals of Concrete Technology

• Basic Concept of Concrete Design

• Main Features for ACI and European Standard EN

for Concrete Design

• Effects of Different Loads on the Building

• Earthquake, Wind Load Effect

• Loads Affect Pipe Rack, Static Equipment and

Tanks Foundations

• Principal, Limitations for Different Codes in

Concrete (ACI codes, European Code)

• Codes and Standards Philosophy

• Principal of Concrete Design and Precaution

• Different Structure Systems

• Different Slab Types

• The Way to Use the Suitable Structure System

DAY 2

• Loads Applied in Horizontal Vessel (Separators)

• Design of Vessel Foundation including Horizontal

and Vertical Types

• Loads Applied in Heaters

• Design of Heater Foundations

• Ring Beam Design for Circular Tank

• Pipeline Support Design

• Checklist to Review the Design

DAY 3

• Soil Investigation

• Shallow Foundation Design Philosophy & Design

• Pile Foundation Design Philosophy & Design

• Anchor Bolt Design

• Foundation under Machines Design Static &

Dynamic

• Checklist to Review Foundation under Rotating

Equipment

• Precaution in Design Foundation under Vibrating

Machines

• Design of Slab, Beam and Columns

• Design Blast Resistance Building such as Control

Room

• Control Room Layout and Configuration

DAY 4

• Pipe Rack Configuration

• Pipe Rack Foundation Design

• Retaining Walls Design

• Load and Force in Retaining Walls

• Retaining Walls Design Checks

DAY 5

• Design for Reinforced Concrete Liquid Tanks

including Different Types (underground, ground

and elevated) Tanks

• Structure System for Concrete Tanks

• Circular and Rectangular Tank

• Design of Foundation under Tower

• Maintenance and Repair in Concrete Structure

• Integrity and Maintenance Management System

Principle

Seminar Outline

REGISTRATION DETAILS

LAST NAME:________________________________________FIRST NAME:_______________________________________DESIGNATION:_____________________________________ COMPANY: ________________________________________ADDRESS: __________________________________________________________________________________________CITY:______________________________________________COUNTRY: ________________________________________TELEPHONE:______________________________________MOBILE: __________________________________________FAX:________________________________________________EMAIL:_____________________________________________

AUTHORISATION DETAILS

AUTHORISED BY:_____________________________________________________________________________________DESIGNATION:_____________________________________ COMPANY: ________________________________________ADDRESS: __________________________________________________________________________________________CITY:______________________________________________COUNTRY: ________________________________________TELEPHONE:______________________________________MOBILE: __________________________________________FAX:_____________________________________________EMAIL:_____________________________________________

PAYMENT DETAILS

q Please invoice my company q Cheque payable to GLOMACSq Please invoice me

CERTIFICATION

Successful participants will receive GLOMACS’ Certificate of Completion

P.O. Box 74653 Dubai, U.A.E.T: +971 (04) 425 0700 | F: +971 (04) 425 0701E: info@glomacs.com | W: www.glomacs.com

Connect withUs On LinkedIn

Scan the QR Code* to visit and

connect to our LinkedIn profile.

*Requires QR code reader/scanner applicationto be installed on your smartphone.

Code Date Venue FeesCC004 22 - 26 Mar 2020 Dubai $4,950

CC004 13 - 17 Dec 2020 Dubai $4,950

4 WAYS TO REGISTER

Tel: +971 (04) 425 0700 Fax: +971 (04) 425 0701Email: info@glomacs.comWebsite: www.glomacs.com

TERMS AND CONDITIONS

• Fees – Each fee is inclusive of Documentation, Lunch and refreshments served during the entire seminar.

• Mode of Payment – The delegate has the option to pay the course fee directly or request to send an invoice to his/her company/sponsor. Credit card and cheque payments are both acceptable.

• Cancellation / Substitution – Request for seminar cancellation must be made in writing & received three (3) weeks prior to the seminar date. A US$ 250.00 processing fee will be charged per delegate for each cancellation. Thereafter, we regret that we are unable to refund any fees due, although in such cases we would be happy to welcome a colleague who would substitute for you.

• Hotel Accommodation – is not included in the course fee. A reduced corporate rate and a limited number of rooms may be available for attendees wishing to stay at the hotel venue. Requests for hotel reservations should be made at least three (3) weeks prior to the commencement of the seminar. All hotel accommodation is strictly subject to availability and terms and conditions imposed by the hotel will apply.

• Attendance Certificate – a certificate of attendance will only be awarded to those delegates who successfully completed/attended the entire seminar including the awarding of applicable Continuing Professional Education Units/Hours.

• Force Majeure – any circumstances beyond the control of the Company may necessitate postponement, change of seminar venue or substitution of assigned Instructor. The Company reserves the right to exercise this clause and implement such amendments.

• Fair Access / Equal Opportunities – In the provision of its services as a world-class Training Provider, the Company is committed to provide fair access / equal opportunities throughout the delivery of its courses and assessment leading to the completion of training seminars, or 3rd party qualifications/certifications.

Concrete Structure Designingfor Industrial Projects