Cordless blind rivet setting tools - Colly · PDF fileCordless blind rivet setting tools ... efficiently without fatigue • Improved haptics by use of softer material • Non-slip

8888

111 114 117

100 102 104 106

9820

9020

96 97

92 93 94

The experts in riveting technologies

Cordless blind rivet setting tools

Blind rivet hand tools

Battery powered blind rivet setting tools

AccuBird® PowerBird® Solar

HN2 SN2

PowerBird®

NTS

PowerBird® ProAccuBird® Pro PowerBird® Pro Gold Edition

Pro series with spring- loaded trigger system

NTX & NTX-F Flipper®

89

X X X

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


What rivets what?

tools EnergyPolyGrip® G-Bulb meGa GriP®* BULB-tite®* tri-foLd®

3.2 4.0 4.8 6.4 4.8 6.4 4.1 4.8

ntS H A A A

ntX / ntX f H A A A

flipper® H

Hn2 H SE with X

Sn2 H

Hn2 Bt H

accuBird® B X at 6,3 A S

PowerBird® B AS 6,4 X at 7,7

PowerBird® Solar B AS 6,4 X at 7,7

accuBird® Pro B X at 6,3 A S

PowerBird® Pro B 6,4 X at 7,7

PowerBird® Pro Gold edition B 6,4 X at 7,7

PowerBird® Pro Gold edition with spring-loaded trigger system

B 6,4 X at 7,7

tools EnergyBlind rivet Ø mm

2.4 3.0 3.2 4.0 4.8 5.0 6.0 6.4 8.0

ntS H A A

ntX / ntX f H A A

flipper® H A A

Hn2 H

Sn2 H

accuBird® B A

PowerBird® B Y Y

PowerBird® Solar B Y Y

accuBird® Pro B A

PowerBird® Pro B Y Y A

PowerBird® Pro Gold edition B Y Y A

PowerBird® Pro Goldedition with spring-loaded trigger system

B Y Y A

H: HandtoolB: Battery-powered tool

X: Special accessories requiredY: Accessories included in the scope of delivery effectively expand the working range.*: A special nosepiece is always required when setting MEGA GRIP®

blind rivets and BULB-TITE® blind rivets

A: AluS: SteelE: Stainless Steel / MonelBlue box: All materials (ASE) can be riveted. Where there are exceptions, the letters of the rivetable materials are provi-ded directly in the box.

9090



GeSiPa® manual blind rivet setting tools – easy to operate, tried and tested, always good but now even better!

GeSiPa® has not only redesigned the classic ntX tools themselves but also optimised the surfaces and handles.

By utilising a soft rubber material, the new ergonomically designed handles make it ea-sier to work while substantially relieving the strain on the hands.

91

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


NTX & NTX-F

Tried and tested technology and quality in a new design

Handles• Ergonomically formed handles for working

efficiently without fatigue• Improved haptics by use of softer material• Non-slip even in oily environments• Environmentally compatible thanks to PVC-free

handles• Visually upgraded by GESIPA® logo and contrast

stripes • Optimised locking clip

Housing• Improved performance thanks to newly designed

housing• Powder-coated abrasion-resistant housing surface

in GESIPA® colour• GESIPA NTX visually upgraded with Made in

Germany lettering

ergonomics Ergonomically formed handles for working efficiently without fatigue

Surface Powder-coated abrasion-resistant housing surface in GESIPA® colour

Housing Improved performance thanks to newly designed housing

Locking clip Optimised locking clip (NTX-F)

advantages• Simple one-hand operation• Effortless lever system• Specially hardened GESIPA® jaw system• Rugged design and durable• Equipped with the most commonly used GESIPA®

nosepieces secured directly on the tool • Nosepieces quick and easy to change• Worldwide service and spare parts available for

decades to come• Made in Germany

9292 The experts in riveting technologies

Jaws (2-parts) For NTS, NTX, NTX-F and Flipper®

Working rangeBlind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel

technical dataWeight: 480 gTotal length: 275 mmStroke: 8 mm

accessories Nosepieces: 10/18, 10/24, 10/27 and 10/32 1 maintenance wrench, operating instructions with spare parts list

advantages• Body casing in high-quality die cast aluminium• Body head made of forged steel• Narrow head for difficult to access rivet locations• Opening spring for automatic ejection of the mandrel• Ergonomic handles


Part no. 143 4028

NTS (with self opening spring)

nosepiece assignment for ntS, ntX and ntX-f can be found on page 97.

Dimensions in mm

Part no. 143 4071

93

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols



NTX & NTX-F

accessories ntXNosepieces:10/18, 10/24 and 10/321 maintenance wrench, operating instructions with spare parts list

accessories ntX-fNosepieces:10/24, 10/27 and 10/321 maintenance wrench, operating instructions with spare parts list

additional advantage ntX-f• Opening spring for automatic ejection of the mandrel

Dimensions in mm

nosepiece assignment for ntS, ntX and ntX-f can be found on page 97.

Part no. 143 4071

Part no. 143 4042Part no. 143 4040


technical dataWeight: 575 gTotal length: 260 mmStroke: 8 mm

advantages• Body casing in high-quality die cast aluminium• Body head made of chrome-vanadium steel,

forged• Steel inserts on all bearing points subject to

wear• Intermediate lever system reduces the force

required and dampens the tear-off effect• Narrow pliers head for difficult to access rivet

locations• Ergonomic slip handles• Simple maintenance – fast jaw change

NTX-F NTX (with self opening spring)


Conversion kit for plastic blind rivets:

Flipper®


technical data Weight: 750 gTotal length: 221 mmTotal stroke: 16.2 mmSingle action stroke: 1.8 mm

nosepieces/accessoriesNosepieces:10/18, 10/24 and 10/291 maintenance wrench (on magazine)Operating instructions with spare parts list

advantages• The force increases when the handle is closed. This is

made use of via the special arrangement of the lever when setting blind rivets: ergonomic design

• The required manual force is reduced by aroand 40 percent if actuated several times.

• Actuation lever with an opening spring for easy single-handed operation

• Jaw mechanism with spring reset for safe and automatic mandrel ejection

• Rivet mandrel collection container can be clipped to the body casing and is easy to empty

• Larger device lift: a benefit when handling extra long blind rivets

• Sturdy body casing in high-quality die cast aluminium• Sturdy actuation lever made of tempered steel• Link pin on anti-twist bearings• Ergonomic lever positions and handle design

nosepiece assignment for flipper® can be found on page 97.

the blind rivet hand tool for easy handling with only one hand.

i

Dimensions in mm

Part no. 143 3950

Part no. 143 3984

95

!2

Cord

less

blin

d ri

vet

sett

ing

tool

s


Blind rivet hand tools – sortiment

Flipper® boxContentsBlind rivet hand tool flipper® and 3 PolyGrip® blind rivet sizes, in a lightweight plastic carrying case.Weight: approx. 0.9 kgDimensions: 220 x 200 x 40 mm

mini pack refills can be found on page 282.

incl. 3 blind rivet sizesPolyGrip® Alu/steel 3.2 x 8.0 mm PolyGrip® Alu/steel 4.0 x 10.0 mmPolyGrip® Alu/steel 4.8 x 10.0 mm

Riveting kit

ContentsBlind rivet hand tool ntX and 5 blind rivet sizes, 1 maintenance wrench.Weight: approx. 2.5 kgDimensions: 275 x 145 x 40 mm

ContentsBlind rivet hand tool ntX and 12 blind rivet sizes, 1 maintenance wrench.Weight: approx. 3.75 kgDimensions: 340 x 205 x 40 mm

Junior riveting kit

Junior riveting kit

Junior riveting kit PolyGrip®

incl. 5 blind rivet sizesAlu/steel 3.0 x 6.0 mmAlu/steel 3.0 x 8.0 mmAlu/steel 4.0 x 6.0 mmAlu/steel 4.0 x10.0 mmSteel/steel 3.0 x 6.0 mm

incl.12 blind rivet sizesAlu/steel 3.0 x 8.0 mmAlu/steel 3.0 x10.0 mmAlu/steel 3.0 x12.0 mmAlu/steel 4.0 x 5.0 mmAlu/steel 4.0 x 6.0 mmAlu/steel 4.0 x 8.0 mmAlu/steel 4.0 x10.0 mmAlu/steel 4.0 x12.0 mmCopper/steel 3.0 x 6.0 mm Copper/steel 4.0 x 6.0 mmAlu/steel 3.0 x 5.0 mmAlu/steel 3.0 x 7.0 mm

Now also available as Junior riveting kit PolyGrip® (Part no. 145 7662) with the sizes 3.2 x 8, 4 x10, 4 x17, 4.8 x 10 and 4.8 x 17.

Part no. 143 3950

Part no. 143 3984

Part no. 143 5457

Part no. 143 5459

Part no. 145 7662

Part no. 143 3951


Working rangeBlind rivets up to 7.7 mm Ø all materials

technical data Weight: 1.85 kgTotal length: 570 mmStroke: 10 mm

accessoriesNosepieces:16/26 BT, 16/32 BT, 16/42 BT and 16/48 BTSpent mandrel containerMaintenance instructions with spare parts list

Jaws (3 parts): Hn 2 Bt

Working rangeBlind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb blind rivets

technical dataWeight: 1.85 kgTotal length: 570 mmStroke: 10 mm

accessoriesNosepieces:16/29, 16/32, 16/36, 16/40 and 16/45Spent mandrel containerMaintenance instructions with spare parts list

Jaws (3 parts)

Lever riveting tools

(only for BULB-tite® see page 72)

HN 2 HN 2-BT

advantages• Pliers casing in high-quality die cast aluminium, its

sturdy design protects it against soiling• Link pin on anti-twist bearings and with inner axial

protection, wear-proof and smooth running• Tooth segment transmission with favourable lever

arm arrangement reduces the force required and dampens the tear-off effect

• Fixed casing lever and ergonomic handle design: simple and easy handling

• Actuation lever: repeated re-engagement very easy, even on workpiece; highly beneficial for oversized blind rivets

• Gear rack: supported on a brass plate; smooth running

• Rivet mandrel collection tank: swivel-mounted to the casing; can be emptied easily and safely

nosepieces and performance see page 97.

Dimensions in mm

Part no. 143 4107 Part no. 145 6714

Part no. 143 4103Part no. 143 4173

97

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


Lazy tong riveting tool

SN 2Working rangeBlind rivets from 3.0 up to 6.4 mm Ø all materialsG-Bulb blind rivets up to 4.8 mm Ø.

technical dataWeight: 1.93 kgLength when closed: 310 mmLength when opened: 810 mmStroke: 10.5 mm

accessories Nosepieces for Ø 3.2 mm, 4.0 mm, 4.8 mm, 6.0 mm and 6.4 mm, 1 maintenance wrench,Operating instructions with spare parts list

advantages• Pliers casing and handle in high-quality die

cast aluminium• Shear system in high strength steel, galvanised• Moulded handle — double bearing• Narrow casing for difficult to access rivets• Enclosed pliers casing prevents soiling• Favourable lever arm arrangement with 4-joint

slide block bearing — reduced effort

rivet Ø rivet material ntS, ntX, ntX-f,

flipper®

Sn2 Hn2 Hn2-Bt

2,4 Alu 10/18 — — —

3.2 CAP®-Alu, CAP®-Cu 10/18 — — —

3 and 3.2 Alu, Cu, Steel, Stainless steel, Stinox, Alu, PG-Alu,

PG-Steel

10/24 17/24 16/24 —

4 Alu, Cu 10/24 17/24 16/24 —

4 Steel, CAP®-Alu, CAP®-Cu, Alu, PG-Alu

10/27 17/27 16/27 —

4 Stainless steel, Stinox, PG-Steel

10/29 17/29 16/29 —

4.8 CAP®-Alu, CAP®-Cu 10/29 17/29 16/29 —

5 and 4.8 Alu, PG-Alu 10/32 17/29 16/29 —

5 and 4.8 Steel, Alu — 17/32 16/32 —

5 and 4.8 Stainless steel, Stinox, PG-Steel

— 17/36 16/36 —

6 Alu — 17/36 16/36 —

6 Steel — 17/40 16/40 —

6.4 Alu, PG-Alu — 17/40 16/40 —

6.4 Steel, Alu — 17/45 16/45 —

4 all BULB-tite® — — — 16/26 BT

5.2 all BULB-tite® — — — 16/32 BT

6.3 all BULB-tite® — — — 16/42 BT

7.7 all BULB-tite® — — — 16/48 BT

article Part no.

10/18 143 4055

10/24 143 4061

10/27 143 4062

10/29 143 4064

10/32 143 4065

16/18 143 4285

16/24 143 4288

16/27 143 4289

16/29 143 4290

16/32 143 4291

16/36 143 4292

16/40 143 4293

16/45 143 4300

16/26 BT 143 4301

16/32 BT 143 4302

16/42 BT 143 4303

16/48 BT 143 4304

nosepiece assignment for manual, lazy tongue and lever rivet devices

Nosepiece assignment data apply to DIN and GESIPA® blind rivets.

article numbers for nosepieces

Jaws (3 parts)

Dimensions in mm

Part no. 145 6714

Part no. 145 6674

Part no. 143 4958

9898

MADE IN GermanY

Video


the Bird generation with brushless motor – reliability for a high run and fast work sequence

the Bird Pro seriesGESIPA®, which invented battery-powered blind riveting technology, has been producing the Bird series for over twenty years now. To this day, it sets the standard for the battery-powered blind riveting devices market. Not least due to changing customer requirements, the Bird family‘s modular system is updated on a regular basis. GESIPA® has therefore built a new platform that will supplement the current Bird series to meet the highest customer require-ments. The new tools in this series are the PowerBird® Pro Gold Edition, PowerBird® Pro, AccuBird® Pro, FireBird® Pro and the FireBird® Pro Gold Edition.

Well-proven and ergonomically designedThe Bird Pro series is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.

BLdC technologyA BLDC motor is a brushless DC motor that, instead of brushes that are susceptible to wear, uses electrical sen-sors to detect the rotor‘s position and commutate the stator coil via circuit breakers. A special software in the electro-nics controls the motor.

The advantages of a BLDC motor include high efficiecy, long service life, particularly smooth running with a precision ball bearing and a reduction in electrical noise radiation.

PackagingAll tools in the Bird Pro Series come in a practical plastic case.

The Bird Pro series

99

2 3 42

Cord

less

blin

d ri

vet

sett

ing

tool

s


Li-ion batteries The GESIPA® Bird Pro series is equipped as standard with a new rechargeable 2.1 Ah li-ion slide-on battery. These rechargeable li-ion batteries feature the new Deep Sleep function. To keep intrinsic con-sumption as low as possible, after a set idle time, the battery auto-matically assumes "Deep Sleep" mode. The battery can then be woken directly in the tool. There is no delay after being woken and the battery is immediately ready for use.

3. Sliding batteryNew sliding battery with exact optical and acoustic charging status display prevents unpleasant sur-prises. The deep sleep function and the electrical feedback of the braking energy extend the battery range − a battery charge lasts for up to 2,000 ri-veting operations. Additional catching grids prevent falling.

4. Charging unitCharging unit with quick-charge function. The battery can be used again after only 45 minutes of charging, and is fully charged after just 90 minutes.

1. autoreverse function Immediately after mandrel break-off, this optional opera-ting mode stops the pulling process and moves the jaw assembly back into the initial position. This saves time and energy while making sure the tool is immediately ready for use.

2. LightingThe light-emitting diodes precisely aligned to the work piece are integrated into the adjusting ring. There are three possible switch positions: Process-controlled: The diodes remain illuminated after the setting process, which allows a continuous workflow even in bad lighting conditions.Torch function :Steady glow of diode (max.10 minutes)Lighting off: saves electricity.

Characteristics

advantages• More powerful and longer-lasting BLDC

motor for quick flow of work • 25 mm stroke for long blind rivets • Up to 20 kN setting force for particularly

large blind rivets• Variable lighting in the adjusting ring

• Increased stability due to larger, non-slip stand surface and lower centre of gravity

• Easy-to-grasp housing thanks to Softgrip• New sliding battery • Charging unit with quick-charge function

Battery-powered blind rivet setting toolswith brushless motor

Charging technology The GESIPA® li-ion chargers are available for 110 V and 240 V AC voltages. The charger comes with a Euro plug as standard. Other versions for China, UK and USA are available on request.


AccuBird® Pro

accuBird® Pro With slide-on, rechargeable 18.0 V/2.1 Ah battery pack and charger in plastic carrying case

accuBird® Pro With two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case

accuBird® ProThe brushless motor and 10,000 N setting force make the AccuBird® Pro extremely fast for setting blind rivets of any material up to Ø 5 mm.

extremely fast, virtually no wearThe BLDC motor of the AccuBird® Pro has an extre-mely long service life and is virtually non-wearing. Compared to commercially available battery-po-wered tools, setting can be done up to 4x faster making it comparable with hydropneumatic blind rivet setting tools.

The optional Autoreverse function additionally shortens the pulling process, ensuring the AccuBird® Pro is immediately ready for operation.

Well-proven and ergonomically designedThe AccuBird® Pro is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.

the variable tool Blind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all ma-terials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 4 mm and 5.2 mm aluminium and steel. G-Bulb blind rivets up to Ø 4.8 mm all materials.

make sure the correct jaw pusher is used as specified in the operating instructions!

the latest generation of the battery-powered blind rivet setting tool – up to 4x faster than other battery-powered tools on the market!

Dimensions in mm

Part no. 143 5447

Part no. 143 2365

* Supplied with Euro plug as standard (other versions on request)

101

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


Jaws (3-part)

technical dataSetting force: 10,000 NWeight: 2.0 kg with batteryDrive: 18 V brushless DC motor (BLDC)Stroke: 25 mm

equipment Nosepieces: 17/24, 17/27, 17/29 and 17/32

18.0 V/2.1 ah li-ion slide-on battery pack

Weight: 0.4 kg available as special accessory

Charger for 18.0 V li-ion battery

technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutes Weight: 0.6 kg

Note: Equipped with Euro plug as standard(other versions on request)

AccuBird® Pro – the battery-powered blind rivet setting tool with 10 kN setting force and brushless motor

retaining nosepiece

Part no. retaining nosepiece

Part no.

17/18 R 143 5010 17/29 R 143 5013

17/24 R 143 5011 17/32 R* 143 5014

17/27 R 143 5012 17/36 R* 143 5015

*also for PowerBird®

• Inserted rivet remains in any position

• Rivets may be set with only one hand

• Safer working

Blind rivet Ø in mm

material approx. pc /

batterycharge

nose-piece

Part no.

2.4 Alu 1,800 17/18* 143 4976

3.2 CAP-Alu, CAP-Cu 1,300 17/18* 143 4976

3 and 3.2 Alu 1,100 17/24 143 4955

3 and 3.2 Steel 1,100 17/24 143 4955

3 and 3.2 Stainless steel 1,100 17/24 143 4955

4 Alu 1,100 17/24 143 4955

4 Steel 1,000 17/27 143 4973

4 Stainless steel 950 17/29 143 4974

4.8 and 5 Alu 850 17/29 143 4974

4.8 and 5 Steel 750 17/32 143 4975

4.8 and 5 Stainless steel 550 17/36* 143 4977

6 Alu 400 17/36* 143 4977

* available as special accessorySpecial design nosepieces are available on request. The nosepiece allocation data applies to DIN and GESIPA® blind rivets.



batterycharge

nose-piece

Part no.

4 Alu 1,300 17/26 BT* 143 4985

5.2 Alu 1,100 17/32 BT* 143 4986

6.3 Alu 800 17/42 BT* 143 4988

6.3 Steel 550 17/42 BT* 143 4988

nosepiece assignment Power per battery charge

Special accessory: retaining nosepiece

one-piece extension unit for setting rivets in deep positions and with difficult access

One-piece, slim extension unit approx. 106 mm

One-piece, slim extension unit approx. 156 mm

Further extension units on page 108, 172 and 173.

Part no. 143 5568

Part no. 145 7641

Part no. 145 7642

BULB-tite® blind rivet

Part no. 145 0860

Part no. 145 0861


PowerBird® Pro

PowerBird® ProWith slide-on, rechargeable 18.0 V/2.1 Ah battery pack and charger* in plastic carrying case

Powerful and fastThe PowerBird® Pro enhances the new Pro series. With a setting force of 15,000 N and the well-pro-ven brushless motor, the PowerBird® Pro is powerful and fast when setting blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shortens the pulling process, ensuring the PowerBird® Pro is immediately ready for opera-tion. The stroke has been substantially increased to 25 mm for the purpose of setting particularly long rivets.

even faster, virtually no wearSince no wear-prone brushes are use, the motor of the PowerBird® Pro has an extremely long service life, is virtually non-wearing and and reliably guarantees the fastest setting frequencies.

Well-proven and ergonomically designedThe PowerBird® Pro is equipped with the low-wear jaws system and features the same ergonomic design as the TAU-RUS® series, already proven a thousand times over.

the variable toolBlind rivets from Ø 4.8 mm steel, up to Ø 6.4 mm all mate-rials, up to Ø 8 mm aluminium, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to Ø 7.7 mm all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.


PowerBird® ProWith two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case


PowerBird® Pro – the all-rounder in the Pro series. it combines exceptional speed with high power!

Dimensions in mm

Part no. 145 0814

Part no. 145 0810

103

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


Jaws (3-part)

technical data Setting force: 15,000 NWeight: 2.0 kg with batteryDrive: 18 V brushless DC motor (BLDC)Stroke: 25 mm


18.0 V/2.1 ah (li-ion) slide-on battery pack



technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutesWeight: 0.6 kg

Note: Equipped with Euro plug as standard (other versions on request)

• Inserted rivet stays in any position

• Set rivets with only one hand

• Safer working




batterycharge

nosepiece

Part no.

4.8 and 5.0 Steel, Alu 1,000 17/32 143 4975

4.8 and 5.0 Stainless steel 700 17/36 143 4977

6.0 Alu 650 17/36 143 4977

6,0 Steel 500 17/40 143 4999

6.4 Alu, PG-Alu 550 17/45 143 4860

6.4 Steel 450 17/45 143 4860

8 Alu 500 17/45 143 4860

4.0 Alu 1,200 17/26 BT* 143 4985

5.2 Alu 1,000 17/32 BT* 143 4986

6.3 Alu 800 17/42 BT* 143 4988

6.3 Steel 700 17/42 BT* 143 4988

6.3 Monel 650 17/42 BT* 143 4988

7.7 Alu 700 17/48 BT* 143 4989

4.8 Alu 800 17/31 MG* 143 4993

4.8 Steel 750 17/31 MG* 143 4993

4.8 Stainless steel 750 17/31 MG* 143 4993

6.4 Alu 700 17/41 MG* 143 4865

6.4 Steel 300 17/41 MG* 143 4865

6.4 Stainless steel 250 17/41 MG* 143 4865

* Available as special accessory

Special design nosepieces are available on request. The nosepiece allocation data applies to DIN and GESIPA® blind rivets.

nosepiece assignment

BULB-tite® blind rivets*

meGa GriP® blind rivets*

PowerBird® Pro – the battery-powered blind rivet set-ting tool with 15 kN setting force and brushless motor

retaining nosepiece Part no.

17/32 R 143 5014

17/36 R 143 5015

17/40 R 145 7347

17/45 R 145 7348


One-piece, slim extension unit approx.106 mm



Part no. 143 5568

Part no. 145 7641

Part no. 145 7642

Part no. 145 7650

Part no. 145 7651

104104

i


PowerBird® Pro Gold Edition

even more powerfulThanks to the brushless motor and the 20,000 N setting force the PowerBird® Pro Gold Edition is even more powerful and can even set G-Bulb and Poly-Grip® blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shor-tens the pulling process, ensuring the PowerBird® Pro Gold Edition is immediately ready for operation.

The stroke has been substantially increased to 25 mm for the purpose of setting particularly long rivets.

even faster, virtually no wearSince no wear-prone brushes are use, the motor of the Power-Bird® Pro Gold Edition has an extremely long service life, is virtually non-wearing and and reliably guarantees the fastest setting frequencies.

Well-proven and ergonomically designed The PowerBird® Pro Gold Edition is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.

the variable tool Blind rivets up to Ø 6.4 mm all materials and up to to Ø 8 mm aluminium. BULB-TITE® blind rivets up to Ø 7.7 mm all materi-als. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.



PowerBird® Pro Gold edition – the strong one for high volumes and fast working sequences

Dimensions in mm

PowerBird® Pro Gold editionWith slide-on 18.0 V/2.1 Ah battery pack, char-ger* in plastic carrying case as well as additional jaw pusher for smaller blind rivet dimensions.

PowerBird® Pro Gold editionWith two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case

Part no. 145 7636

Part no. 145 7640

105

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


technical data Setting force: 20,000 NWeight: 2.0 kg with batteryDrive: 18 V DC brushless DC motor (BLDC)Stroke: 25 mm


Blind rivet Ø in

mm


batterycharge

no-sepiece

Part no.

4.8 and 5.0 Steel, Alu 1,800 17/32 143 4975

4.8 and 5.0 Stainless steel 1,600 17/36 143 4977

6.0 Alu 1,000 17/36 143 4977

6.0 Steel 650 17/40 143 4999

6.4 Alu, PG-Alu 600 17/45 143 4860

6.4 Steel 550 17/45 143 4860

8 Alu 550 17/45 143 4860

4.0 Alu 1,300 17/26 BT* 143 4985

5.2 Alu 1,200 17/32 BT* 143 4986

6.3 Alu 800 17/42 BT* 143 4988

6.3 Steel 550 17/42 BT* 143 4988

6.3 Monel 600 17/42 BT* 143 4988

7.7 Alu 700 17/48 BT* 143 4989

* Available as special accessoryCan be combined with accessories of other battery-powered blind rivet setting tools.Special design nosepieces are available on request. The nosepiece allocation data applies to DIN and GESIPA® blind rivets.

nosepiece assignment

BULB-tite® blind rivets*

meGa GriP® blind rivets*

PowerBird® Pro Gold Edition – the battery-powered blind rivet setting tool with 20 kN setting force and brushless motor

technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutes Weight: 0,6 kg

Note: Equipped with Euro plug as standard (other versions on request)

• Inserted rivet stays in any position

• Set rivets with only one hand

• Safer working






17/32 R 143 5014

17/36 R 143 5015

17/40 R 145 7347

17/45 R 145 7348

Jaws (3-part)

18.0 V/2.1 ah (li-ion) slide-on battery pack




Part no. 143 5568

Part no. 145 7641

Part no. 145 7642

Part no. 145 7650

Part no. 145 7651

4.8 Alu 1,000 17/31 MG* 143 4993

4.8 Steel 950 17/31 MG* 143 4993

4.8Stainless

Steel900 17/31 MG* 143 4993

6.4 Alu 950 17/41 MG* 143 4865

6.4 Steel 250 17/41 MG* 143 4865

6.4Stainless

Steel250 17/41 MG* 143 4865


the well-proven spring-loaded trigger system of the taUrUS® series now also for the Bird Pro series

The spring-loaded trigger system ensures that the parts to be riveted reliably make contact without any gaps before riveting. Furthermore, the operator will be certain that the blind rivet has reached its end position in the hole before setting and the setting head is in contact with the material. The pressing force can be varied with springs depending on the application.

functional principleThe surface contact trigger mechanism is also installed on the trigger button of the device. It only allows the riveting device to trigger when a set compressive force on the part is reached. This ensures that the various components in the application are pressed correctly onto each other before the riveting process. This means that uncontrolled deforma-tion of the rivet body between the materials is prevented, which would otherwise go andetected.

The surface contact force can be varied in five steps. It is set by either adding or removing springs. This rules out the possibility of unintentionally changing the defined surface contact force. A row of pushbuttons is arranged in front of the standard trigger button. On overcoming the spring force and reaching the defined surface contact force, the riveting process can only be triggered by pressing the yellow button.

dimensioned drawing of PowerBird® Pro Gold edition with spring-loaded trigger system

Bird Pro series with spring-loaded trigger system

technical data: See AccuBird Pro®, Page 100.See PowerBird Pro®, Page 102.See PowerBird Pro® Gold Edition, Page 104.Dimensions in mm

Example image of PowerBird® Pro

The tools come with slide-on 18.0 V/2.1 Ah battery pack and charger in plastic carrying case

accuBird® Pro with spring-loaded trigger system

PowerBird® Pro with spring-loaded trigger system

PowerBird® Pro Gold edition with spring-loaded trigger system

Part no. 150 2102

the spring-loaded trigger system is only sup-plied completely mounted. retrofitting in only possible through GeSiPa®.

Part no. 150 2103

Part no. 145 7638

107

360°

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


technical dataWeight: 1.1 kgStroke: 23 mmTraction power: up to 20 kN

accessoiresNosepiece:17/45 WK

advantages• Realisation of small edge

clearances• High setting force in tight

installation areas• Large stroke• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws

The angle head 90° is designed for use in very narrow and confined spaces. The rugged design makes it possible to set blind rivets with a high setting force even in working areas that are diffi-cult to access.

The angle head 90° can set standard blind rivets with a diameter up to 6.4 mm in all materials and 8 mm in aluminium with a setting force up to 20 kN. The smallest edge distance is 15 mm, the head length 110 mm.

Jaws

Angle head 90° for the Bird Pro series

Part no. 146 4882

Part no. 143 5568

the angle head can be positi-oned freely in every position (360°) on the tensile axis.

Example image of PowerBird® Pro

Part no. 150 2102

Part no. 150 2103

Part no. 145 7638


transparent spent mandrel container now also for the Bird Pro series

The classic spent mandrel container of the Bird Pro series is now also available in a transparent version which allows you to keep an eye on the amount of spent mandrels.

Accessories for the Bird Pro series

extended by 30 mm:

extended by 60 mm:

Part no. 145 0838

Part no. 145 0839

extension for spent mandrel container Bird Pro series

one-piece extension units replace the steel head sleeve, they are slim and are therefore particularly suitable for tight spaces that are difficult to access (Total length = steel head sleeve + standard nosepiece). multi-piece extension units are suitable for riveting in low-lying places. They are screwed on between the tool and the existing steel head sleeve (total length = steel head sleeve + extension + standard nosepiece)

tool +35 mm +85 mm +135 mm

accuBird® Pro 145 0860 145 0861 145 0862

PowerBird® Pro 1457 650 145 7651 145 0823

PowerBird® Pro Gold edition 1457 650 145 7651 145 0823

tool 100 mm

accuBird® Pro 145 0859

PowerBird® Pro 145 0820

PowerBird® Pro

Gold edition 145 0820

one-pieceThe total length of the steel head sleeve is 35 mm each for 106 mm, 85 mm each for 156 mm and 135 mm each for 206 mm.

multi-pieceVariable extension of the steel head sleeve is possible in steps of 100 mm. The total length of the steel head sleeve, including the extension unit, is 171 mm for 100 mm.

extension units

tool +50 mm +100 mm +150 mm

PowerBird® Pro Gold edition

with spring-loaded trigger syst.145 0821 145 0822 -

Part no. 145 0837

109

MADE IN GermanY

A C C U B I R D ®

A C C U B I R D ®

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


The Bird series

from the creator of the battery-powered blind rivet setting tool!

the Bird seriesThe development of this Bird series for professional use by specialists and industrial users made GESIPA® the inventor of the cable-free and hose-free blind rivet setting technology. In 2012 the first of the devices, the AccuBird®, celebrated its twentieth birthday.

Production• Made in Germany• GESIPA® developement, market launch and

further developement since 1992 (AccuBird®), 1996 (PowerBird®), 1995 (FireBird®)

• 2014 Development and market launch of the new Bird Pro series

modernised on its 25th anniversaryOn the 25th anniversary of the AccuBird® the Bird series has been technically modernised and visually upgraded. The following modernisations have been implemented on the AccuBird®, PowerBird® and PowerBird® Solar:

• New battery management ensuring the longer-life battery is always ready

• Shorter pulling process with the new additional auto-reverse function. This reduces wear and increases the battery life.

• New lightweight and stable plastic case, same as the Pro- series case.


The Bird series

PackagingAccuBird®, PowerBird® and FireBird® are supplied in a plastic case .

modernised on its 25th anniversary• New battery management ensuring the longer-life

battery is always ready• Shorter pulling process with the new additional auto-

reverse function. This reduces wear and increases the battery life.

• New lightweight and stable plastic case, same as the Pro-series case.

Casing and accessories• Exchange for nosepieces and wrench for the AccuBird®

and PowerBird® on the device, for the FireBird® in the spent mandrel container

• The spent mandrel container, has an approx. volume of 190 cm³, which means it does not need to be emptied frequently

• Accessories and special models have been continuously

Li-ion rechargeable batteries with new battery managementThe GESIPA® AccuBird® and FireBird® battery-powered rivet setting tools are equipped as standard with a 1.3 Ah li-ion rechargeable battery. The GESIPA® PowerBird® variants come with a 2.6 Ah li-ion rechargeable battery. These li-ion batteries are equipped with a new battery management system that enables even longer battery life. The batteries are therefore always ready to use.

The powerful 2.6 Ah battery is also optionally available as a special accessory for the AccuBird® and FireBird®. Older tools can of course also be operated with the Li-Ion batteries. Due to the different charging principle used in the Li-Ion technology, the charging unit must also be replaced when switching over to Li-Ion batteries; the proven charging units for NiCd batteries are however still available.

With Li-ion energy• No memory effect• High energy yield through high voltage

and low weight for easy and fast operation• Extremely low self discharge• Battery shape allows the tool to be stored

standing on its battery

Practical aspects• Exchange nosepieces and wrench always

included in the tool • Compact, shockproof tool housing• Spent mandrel evacuation into the mandrel

container through backfilling and forwards through the nosepiece by gravity

• Fatigue-free working through well balanced weight repartition and ergonomic grip

mechanics, control system and battery• Reliable connection of the mechanics and

control system• Cast control system is water and dust-tight• User-friendly pluggable rechargeable battery

Charging technologyA special, intelligent circuit in the GESIPA® Li-Ion batteries protects against deep discharging, and ensures that the last setting cycle can be completed, before the battery signals its empty condition by switching off. The empty battery is ready for use again after a charging time of only about one hour.

The new GESIPA® Li-Ion charging units are of course also available for the alternating voltages of 110 VAC and 230 VAC.

With new battery management always ready to use

111

i Video

A C C U B I R D ®

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


AccuBird®

the well-proven blind rivet setting tools with Li-ionen energy

AccuBird® with battery 14.4 V / 1.3 Ah and charger, in carrying case

AccuBird® with two batteries 14.4 V / 1.3 Ah and charger, in carrying case

accuBird® – Production• Developed and produced in Germany

since 1992 by the inventor of the battery blind rivet setting tool

reliability• Electronic control• No mechanical switching components• Electronic temperature and overload protection• High reliability through low loss power trans-

mission via a highly efficient ball screw drive

freedom Cablefree tool for flexible operation in installation jobs and industry production

auto-reverse functionImmediately after mandrel break-off, this additional operating mode stops the pulling process and moves the jaw assembly back into the initial position. This reduces wear, saves time and energy while making sure the tool is immediately ready for use.

High performance• 10,000 N setting force• High pulling force for safe setting of blind

rivets up to 5 mm diameter in all materials• High yield per battery charge• Large 20 mm stroke

Versatility Blind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all ma-terials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 6.3 mm aluminium and steel.

High speed• High speed of operation through automatic resetting

of the jaw mechanism immediately after each setting process

With Li-ion energy• Choice of 1.3 Ah and 2.6 Ah Li-Ion batteries• Even greater production rate per battery charge thanks to

the new battery management system

Part no. 143 4898

Part no. 145 7235


AccuBird® – Rechargeable 14.4 volt riveting tool with Li-ion battery – Accessories

Charger 14.4 V Li-ionWorking rangeBlind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all materials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 6.3 mm aluminium and steel.

nosepieces17/24, 17/27, 17/29 and 17/32

technical dataWeight: 2.0 kg with batteryStroke: 20 mmDrive: DC motorTraction power: 10,000 N

technical data Input voltage: 230 V / 50 HzOutput voltage: 14.4 V DCRecharging time: 50 to 100 minutes (battery depending)Weight: 0.6 kg

Dimensions in mm

AccuBird® with battery14.4 V / 1.3 Ahand charger, in cardboard box

AccuBird® with battery14.4 V / 1.3 Ah,in cardboard box

AccuBird® with battery14.4 V / 1.3 Ah and charger with spring loaded trigger system in carrying case

Battery 14.4 V/1.3 ah (Li-ion)

Weight: 0.35 kg

Power battery14.4 V/2.6 ah (Li-ion)



Part no. 145 7240

Part no. 145 7230

Part no. 145 7232

Part no. 145 7269

Part no. 143 4921

Part no. 145 7282

113

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


AccuBird® – Rechargeable 14.4 volt riveting tool with Li-ion battery – Accessories

nosepiece – power per battery charge

rivet Øin mm

material approx. pc/battery

charge

nose-piece

Part no.

2.4 Alu 1,500 17/18* 143 4976

3.2 CAP®-Alu, CAP®-Cu

1,000 17/18* 143 4976

3 and 3.2 Alu 800 17/24 143 4955

3 and 3.2 Steel 800 17/24 143 4955

3 and 3.2 Stainless steel

800 17/24 143 4955

4 Alu 800 17/24 143 4955

4 Steel 700 17/27 143 4973

4 Stainless steel

650 17/29 143 4974

4.8 and 5 Alu 550 17/29 143 4974

4.8 and 5 Steel 450 17/32 143 4975

4.8 and 5 Stainless steel

350 17/36* 143 4977

6 Alu 250 17/36* 143 4977

4 Alu 1,000 17/26 BT* 143 4985

5.2 Alu 800 17/32 BT* 143 4986

6.3 Alu 600 17/42 BT* 143 4988

6.3 Steel 300 17/42 BT* 143 4988

* available a special accessorySpecial design nosepieces are available on requestInformation about nosepiece allocations are valid for DIN compliant and GESIPA® blind rivets.

Universal nosepiece — 17To suit AccuBird®


• Inserted rivet remains in any position

• Rivets may be set with only one hand

• Safer working

retaining nosepiece

Part no. retaining nosepiece

Part no.

17/18 R 143 5010 17/29 R 143 5013

17/24 R 143 5011 17/32 R* 143 5014

17/27 R 143 5012 17/36 R* 143 5015

*also for PowerBird®

one-piece, slim extension unit for setting rivets in deep positions and with difficult access approx. 117 mm, Ø 22.5 mm

Detailed information can be found on page 121.

Detailed information can be found on page 171.

extended spent mandrel container,to suit AccuBird® and PowerBird®

Changeover set for BULB-tite® blind rivets: jaw pusher, jaws and 3 nosepieces

Jaws (3 parts)

Part no. 143 4960

Part no. 145 7273

Part no. 145 7274

Part no. 143 5034

Part no. 143 5033

Part no. 143 4958

BULB-tite® rivet

114114

Video i

PowerBird ®20more than

YEARS


PowerBird®

the well-proven blind rivet setting tool with Li-ion energy and even highersetting performance

PowerBird® with power battery 14.4 Volt / 2.6 Ah and charger, in carrying case

PowerBird® with two power batteries 14.4 Volt / 2.6 Ah and charger, in carrying case

PowerBird® with power battery 14.4 Volt / 2.6 Ah and charger, in carrying case, with spring loaded-trigger system

PowerBird® innovationAs the stronger brother to the well-known AccuBird® the PowerBird® is the powerful extension of the so-called „Bird family“ from GESIPA® able to cope with all structure blind rivets.

Practical aspectsUser oriented scope of delivery: metal carrying case with one battery charger, one battery and four nosepieces

economy• Good price-performance ratio• Large working range• Short processing times• High service life thanks to 2.6 Ah power battery

PowerBird® – With Li-ion energy2.6 Ah battery, alternatively 1.3 Ah on request

PowerBird® – the VersatilityBlind rivets from 4.8 mm Ø steel, up to 6.4 mm Ø all materials and up to 8 mm alu, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to 7.7 mm Ø all materials. MEGA Grip® blind rivets up to 6.4 mm Ø all materials.

Part no. 145 7186

Part no. 145 7190

Part no. 145 7207 Page14

Furtherinfo

115

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


PowerBird® – Rechargeable 14.4 volt power battery riveting tool with Li-Ion battery for even higher performance

Working rangeBlind rivets from Ø 4.8 mm steel, up to Ø 8 mm alu, up to 6.4 mm all materials, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to Ø 7.7 mm, all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm, all materials.

technical dataWeight: 2.2 kg with batteryStroke: 20 mmDrive: DC motor Traction power: 14,000 N

nosepieces17/32, 17/36, 17/40 and 17/45

Jaws (3 parts)

Dimensions in mm

Charger 14.4 V Li-ion

technical dataInput voltage: 230 V / 50 HzOutput voltage: 14.4 V DCRecharging time: 50 to 100 minutes (battery depending)Weight: 0.6 kg

Battery 14.4 V/1.3 ah (Li-ion)


Power battery 14.4 V/2.6 ah (Li-ion)

Weight: 0.5 kg


Part no. 145 7269

Part no. 143 4921

Part no. 143 4104

Part no. 145 7282


PowerBird® – Rechargeable 14.4 volt power battery rive-ting tool with Li-Ion battery for even higher performance

one-piece, slim extension unit for setting rivets in deep positions One-piece, slim extension unit to approx. 110 mm, Ø 22.5 mm, for setting rivets in deep positions and with difficult access

One-piece, slim extension unit to approx. 160 mm, Ø 22.5 mm, for setting rivets in deep positions and with difficult acces

Further dimensions available upon request

extended spent mandrel containerto suit AccuBird® and PowerBird®


• Inserted rivet remains in any position• Rivets may be set with only one hand• Safer work


17/32 R 143 5014

17/36 R 143 5015

17/40 R 145 7347

17/45 R 145 7348

nosepieces – power per battery charge

meGa GriP® blind rivets

rivet Ø

mm

rivet material

approx. pc/bat-

tery rarge

nosepiece Part no.

4.8 and 5.0 Steel, Alu 700 17/32 143 4975

4.8 and 5.0 Stainless steel

600 17/36 143 4977

6.0 Alu 600 17/36 143 4977

6.0 Steel 300 17/40 143 4999

6.4 Alu, PG-Alu 450 17/45 143 4860

6.4 Steel 250 17/45 143 4860

8 Alu 350 17/45 143 4860

BULB-tite® blind rivets

4.0 Alu 1,000 17/26 BT* 143 4985

5.2 Alu 900 17/32 BT* 143 4986

6.3 Alu 600 17/42 BT* 143 4988

6.3 Steel 350 17/42 BT* 143 4988

6.3 Monel 400 17/42 BT* 143 4988

7.7 Alu 500 17/48 BT* 143 4989

and jaws 143 4173

* available as special accessory

Special design nosepieces are available on request Information about nosepiece allocations are valid for DIN compliant and GESIPA® blind rivets.

4.8 Alu 600 17/31 MG* 143 4993

6.4 Alu 450 17/41 MG* 143 4865

4.8 Steel 450 17/31 MG* 143 4993

6.4 Steel 150 17/41 MG* 143 4865

4.8Stainless

steel450 17/31 MG* 143 4993

6.4Stainless

steel150 17/41 MG* 143 4865

Part no. 145 7214

Part no. 145 7215

Part no. 143 5034

117

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


PowerBird® Solarideal for deep, difficult to access areas in solar applications

Working rangeBlind rivets from Ø 4.8 mm steel up to 6.4 mm all materials, except G-Bulb Ø 6.4 mm.BULB-TITE® blind rivets up to Ø 7.7 mm, all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.

Dimensions in mm

Part no. 145 7191

technical dataWeight: 2.42 kg with batteryWorking stroke: 20 mmDrive: DC motorTraction power: 14,000 NExtension unit: approx.167 mm

equipmentapprox. 167 mm extension unittwo Li-Ion power batteries 2.6 Ah/14.4 VQuick chargerNosepieces 17/32, 17/36,17/40, 17/45 and 17/48 BTPlastic carrying case

the GeSiPa® SolarGrip® blind rivet program can be found on page 52.

Page14

Furtherinfo


the well-proven spring-loaded trigger system of the taUrUS® series now as well for accuBird® and PowerBird®

Contact force

Setting the contact force required for the trigger action

Moving steel sleeves

ensuring correct processing of the blind rivets by means of a defined contact pressure

This feature ensures that the materials of the riveting applica-tion will be pressed together before the rivet is installed, thus avoiding gaps in between. Moreover the operator will be cer-tain that the rivet has reached its end position in the applicati-on and that the setting head is in contact with the upper side of the material. The pressing force can be adjusted variably with springs depending on the application.

Process-secure blind riveting even of parts with gaps or recoiling elements

the function

The surface contact trigger mechanism is also installed on the trigger button of the device. It only allows the rivet device to be triggered if a settable compressive force on the part is reached. This ensures that the various components of the application are pressed correctly onto each other before the riveting process. In turn, this means that the uncontrolled deformation of the rivet body between the materials is pre-vented, which would otherwise go andetected.

The surface contact force may vary in five steps. It is set by either adding or removing springs. This rules out the possi-bility of unintentionally adjusting the defined surface contact force. Push buttons are arranged in series in front of the stan-dard trigger button. The rivet process can only be triggered by pressing the yellow trigger button when the spring force has been overcome and the defined surface contact force has been reached.

PowerBird® and AccuBird® versions with spring-loaded trigger system

119

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


Dimensions in mm


the spring-loaded trigger system is only supplied completely mounted. it can only be retrofitted by GeSiPa®.

PowerBird® dimension drawing with spring-loaded trigger system

accuBird® with spring-loaded trigger systemwith battery14.4 V /1.3 Ah and charger, in metal carrying case, Nosepieces 17/24, 17/27, 17/29 and 17/32

PowerBird® with spring-loaded trigger sytemwith power battery 14.4 Volt / 2.6 Ah and charger, in metal carrying case, Nosepieces 17/32, 17/36, 17/40 and 17/45

PowerBird® Solar with spring-loaded trigger system with power battery 14.4 Volt/2.6 Ah and charger, in plastic carrying case, Nospieces 17/32, 17/36, 17/40 and 17/45 approx. 160 mm extension unit

Part no. 145 7232

Part no. 145 7207

Part no. 146 4037


Page14

Furtherinfo

Page14

Furtherinfo

120120

360°


Can be swivelled 360° on the accuBird® and PowerBird® tensile axis

Angle head 90° compact for PowerBird® and AccuBird®

descriptionUsing the angle head 90° compact for PowerBird® and Accu-Bird® allows to set all Types of standard blind rivets up to 5 mm in diameter and aluminium up to 6 mm diameter, depen-ding on the tool Type. The minimum edge clearance is 12 mm, the head length is 90 mm. The angle head can be freely fixed in any position aroand the AccuBird® and PowerBird® tensile axis (360° free rotation).

applicationThe angle head 90° compact is designed for use in tight spaces. Its sturdy design allows it to apply large setting forces when setting blind rivets even in difficult of access work areas with up to10 kN.

technical dataWeight: 0.7 kgStroke: 20 mmTraction power: up to10 kN

accessoiresNosepieces:16/36


clearances (12 mm)• High setting force in tight installation

areas (up to 10 kN)• Large stroke (up to20 mm)• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws• Low vibration, even at high

breaking force level

Dimensions in mm

Part no. 145 7252

121

2Co

rdle

ss b

lind

rive

t se

ttin

g to

ols


tool 50 mm 100 mm 150 mm

accuBird® 145 7273 145 7274 145 0622

PowerBird® 145 7214 145 7215 146 4038

PowerBird®

with spring-loaded trigger system 145 7222 145 7224 -

tool 100 mm

accuBird® 145 7318

PowerBird® 145 7229

Extension units for PowerBird® and AccuBird®

one-piece extension unitsFor setting rivets in deep positions and with difficult access.Total length = steel head sleeve + standard nosepiece

multi-piece extension unitsFor setting rivets in deep positions. They are screwed on between the tool and the existing steel head sleeve. Total length = steel head sleeve + extension + standard nosepiece

multi-pieceVariable extension of the steel head sleeve is possible in steps of 100 mm. The totallength of the steel head sleeve, including the extension unit, is 167 mm for 100 mm.

one-pieceThe total length of the steel head sleeve is 117 mm each for 50 mm, 167 mm each for 100 mm and 217 mm each for 150 mm.

Angle head 90° compact for PowerBird® and AccuBird®

technical dataWeight: 0.7 kgStroke: 20 mmTraction power: up to10 kN

accessoiresNosepieces:16/36


clearances (12 mm)• High setting force in tight installation

areas (up to 10 kN)• Large stroke (up to20 mm)• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws• Low vibration, even at high

breaking force level

Documents

Cordless blind rivet setting tools - Colly · PDF fileCordless blind rivet setting tools ... efficiently without fatigue • Improved haptics by use of softer material • Non-slip