Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Patent pending fines reject chute systemElectrical switchgear with variable frequency feeder driveSwitchgear panel push button controls or tethered control panelExtra off plant motor starters and controlsHeavy-duty bi-directional hydraulic tipping grid with 6" (152 mm)
nominal openingsEnclosed 3-phase electric/hydraulic unit for hydraulic tipping
grid operationTipping grid support legs and spillage wingsRadio remote for tipping grid and belt feeder speed control
30 hp (22 kW) overhead conveyor motor in place of 25 hp (19 kW) 100' (30.5 m) power cables with cable wraps for stowagePower cable quick disconnects12V or 24V plant hydraulic unitHeavy-duty hydraulic run-on jacksBelt scale on feed conveyorTwo-piece foldable side bulkheadsPortable screen lube filter unitDust suppression systemOversize 315 80R x 22.5 tires
*LJ-TSV6203 variable slope triple shaft high g-force 3-deck screen*Hydraulic raising module lifts screen up to 10° in 2.5° increments*Screen suspension and low-maintenance screen
stabilization system*Screen accepts 4' and 5' (1219 and 1524 mm) panels*Bottom deck deflector plates boost screen efficiencyLarge 16' x 8' (4877 x 2438 mm) feed hopper with rubber side curtains25 hp (19 kW), 42" (1067 mm) wide overhead conveyor with
dual hinge transition 15 hp (11 kW), 36" (914 mm) wide 3-ply belt, cartridge style belt feeder10 hp (7.5 kW), 48" (1220 mm) wide underscreen fines
conveyor, raises with screen in 2.5° incrementsTwo 7.5 hp (5.5 kW), 30" (762 mm) wide, reversible top and
center deck cross conveyors7.5 hp, 24" (610 mm) wide, reversible bottom deck cross conveyor
*Patent Pending
OptiOnal EquipmEnt
Standard FEaturES
terex® minerals processing SystemsCedarapids CrS6203FV
CrS6203FV pOrtaBlE FEEdEr/SCrEEn plant
Form 25734 (5/12)
Cross conveyors discharge 44" (1117 mm) beyond frame All conveyor belts are 3-ply with vulcanized belt splices 4-section, 2-position blending system to mix second and
bottom deck oversUnder-frame mounted triple axle spring suspension with
spring-applied brakes Six hydraulic leveling jacks and two pinned telescopic support legsEnclosed gas powered plant hydraulic unit for setting screen
slope, conveyor position, and jacksMany easy maintenance features including conveniently located
grease banks, cartridge style cross belt flashing and low-maintenance motion dampersMartin style conveyor belt wipersSide mounted lockable storage boxService platforms and guard rails around three sides of screen
with telescoping access ladder
CRS6203FV plant shown with the LJ-TSV variable slope screen in the 10° operating position
Effective Date: May 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings inthis document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2012 Terex Corporation.
Terex® Minerals Processing Systems, 909 17th Street NE, Cedar Rapids, IA 52402 USATel +1 319 363 3511 Fax +1 319 399 4871 www.terexmps.com
Transport
Operational
LJ-TSV6203 screen ................................................. 6' x 20' (1829 x 6096 mm)Feed hopper ...............................................................8' x 16' (2438 x 4877 mm) Hopper capacity (below grid) ................................................... 15 yd3 (11.5 m3) Belt feeder ........................................................................................36" (914 mm)Overhead conveyor .......................................................................42" (1067 mm)Underscreen fines conveyor ........................................................48" (1220 mm)Reversible cross conveyor ............................................................. 24" (610 mm)Reversible cross conveyors (2) ....................................................30" (762 mm)Tires .................................................................................... Twelve 295 75R x 22.5
Horsepower LJ-TSV6203 screen ....................................................................40 hp (30 kW) Belt feeder ....................................................................................15 hp (11 kW) Overhead conveyor ..................................................................... 25 hp (19 kW) Underscreen fines conveyor .....................................................10 hp (7.4 kW) Reversible cross conveyors (3) ..............................................7.5 hp (5.6 kW) Grid electric/hydraulic unit.......................................................10 hp (7.4 kW)Estimated weight (fully optioned) Rear axle ......................................................................59,500 lbs (26,990 kg) Kingpin ......................................................................... 46,000 lbs (20,865 kg) Total .............................................................................105,500 lbs (47,855 kg)
terex® minerals processing SystemsCedarapids CrS6203FV portable Feeder/Screen plant
SpECiFiCatiOnS
www.terexmps.com
SpECiFiCatiOnS
14'1"(4293)
4'(1219)
4'(1219)
11" (279) 58'10" (17,932)77'8" (23,673)
3˚ Break Over Angle
4'10"(1473)
4'10"(1473)
5'3"(1600)
6'6" (1981)Axle Track
14'1"(4293)
11'11" (3632)
14'1"(4293)
4'(1219)
4'(1219)
11" (279) 58'10" (17,932)77'8" (23,673)
3˚ Break Over Angle
4'10"(1473)
4'10"(1473)
5'3"(1600)
6'6" (1981)Axle Track
14'1"(4293)
11'11" (3632)
Form 25734 (5/12)
4'9"(1448)
3'3"(991)
77'5" (23,597)16'8" (5080)14'6" (4420) 15'6" (4724) 5'4" (1626) 8' (2438) 19"
(483)7'9" (2362)
*16'10"(5131)
4'9"(1448)
3'3"(991)
77'8" (23,673)16'8" (5080)14'9" (4496)
*6'7"(2007)
15'6" (4724) 8' (2438) 19"(483)
7'9" (2362) 5'9" (1753)Rear Jacks
8'10" (2692)Front/Mid Jacks
*10'9"(3277)
*7'1"(2159)
5'11" (1803)Minimum
7'11" (2413) Max
*21'1"(6426)
10˚ Maximum2.5 ̊Increments
*12'4"(3759)
5'11" (1803)Minimum
7'11" (2413) Max
5'4" (1626)
Minimum 4" (102) CribbingRequired This Jack Leg Only
13" (330) Maximum Jack Lift
*14'8" (4470)Feed Height
*Operational heights shown include the maximum jack lift of 13" (330)