Embed Size (px)
Citation preview
10.1
INT
ER
IOR
ST
OR
AG
EC
ustom
Pro
ducts
Winter 2015 Conestoga Wood Specialties Corporation
Custom Dovetail Drawer Boxes
•Conestoga’sDrawerBoxprogramoffersmultiplewoodspecieselectionsandcustomoptions.Informationaboutdovetaildrawerboxesandrelatedoptionsarefoundonthefollowingpages.
•Dovetaildrawerboxesarefullyassembled;HardMaple,SoftMapleandCategory1and2speciescanbeorderedunfinishedorfinished;NaturalBirchandBirchplywooddrawerboxesareonlyavailablefinished.Seefinishinginformationcontainedinthissection.
•NaturalBirch,HardMaple,SoftMapleandBirchplywooddrawerboxoptionsandaccessorieshavea6daystandardlead-time,anda2daycoderedexpeditelead-time;add2daysforfinishing.Allotherpublishedspeciedrawerboxspecies,add5additionaldays.
5/8" Assembled Custom Dovetail Drawer Box Specifications
Thefollowingspeciesareavailableforthe5/8"CustomDovetailDrawerBoxprogram:
•HardMapleandSoftMapleboxesareconstructedwithMapleveneer(woodcompositecore)bottom.
•NaturalBirchboxesareconstructedwithNaturalBirchveneerfaceandsoundbackplywoodbottom.
•Allotherpublishedspeciedrawerboxesareconstructedwithamatchingspecie1/4"plywoodbottomexceptBamboowhichutilizes1/4"WhiteOak.
•Twofinishingoptionsareavailableoncustomdrawerboxes.Standardfinishonallprogramspeciesisadurable,lowemissionUVtopcoat.Handsprayed,catalyzedconversionvarnishisavailableatanadditionalupchargeonHardandSoftMapledrawerboxes.HandsprayisstandardonCategory1and2species.Bothfinishoptionshavea15°sheentopcoat.SeeAdditionalOptionsandPricingonpage10.2.
•BirchPlywoodboxesareconstructedwithBirchplywoodbottomsand.5mmbandingontopedge.Dovetailjointsareunsanded,unfinishedandarenotputtied.Onlyavailablefinishedandwithundermountnotch,BlumTANDEMclipandlogoburnoptions.
Height 2" 12" 1/2"
Width 3" 46" 1/16"
Depth 3" 31" 1/16"
Dovetail Drawer Box Size Parameters
Description Minimum Maximum Increments
10.2
INT
ER
IOR
ST
OR
AG
EC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Winter 2015
Additional Options
Reveal:1/2"or3/8"
Drawerboxbottom
Reveal Detail
*ContactyourCustomerServiceRepresentativefortoolingrequirementsandcosts.
Additional OptionsBottom Thickness
1/4" Standard Seedrawerboxheightchartsforpricing3/8" Requires1/8"tobeaddedtothedrawerboxheight
NoBottom Optional
Bottom Reveal
1/2" Standard
3/8" Optional
Finishing Options (clear topcoat only, per box)
StandardUVfinish
100linealinchesorfewerperbox
Greaterthan100linealinchesperbox
Handsprayfinish(pricingperboxinadditiontostandardfinishingcharges)
Logo Burn
Privatelabellogoburn
Top Edge Profiles
Standardeasededge1/16"Radius
Easededgefrontandbackbull-nosedsides
Bull-nosedfullradiusedgefoursides
Machineedgefoursides
1/8"RoutededgeAllexceptoutsidefrontedge
OffsetsidesSides1/8"lowerthan
frontandback
10.3
INT
ER
IOR
ST
OR
AG
EC
ustom
Pro
ducts
Winter 2013 Conestoga Wood Specialties Corporation
Undermount Notching Options
•Minimum drawer box width 6"•Undermount notching only•Undermount notching with hook
hole boring (detail shown below)•2-1/2" wide undermount notching only•2-1/2" wide undermount notching with
hook hole boring (detail shown below)
Cut-Down Sides
•Available for 3" or 4" high drawer boxes only
•Add 1/8" to box height dimensions when ordering 3/8" bottoms
•Rear box height 2"
Bread Box Top Routing
•Designed for 1/8" or 1/4" thick lids• 9/32" deep groove on sides only• 1/8" rout is 5/32" wide• 1/4" rout is 9/32" wide• Minimum box height 4"• Lid not included.
Dovetail Drawer Box Options
Reveal Depth
1/2" or 3/8"
Back
Drawer Box Bottom
Undermount with hook hole boring
1/4" dia. x 3/8"Deep
29/32"
7/16"
1-3/8"
2-1/2" wide notch with hook hole boring
2-1/2"
7/16"1/4" dia. x 3/8"
Deep
29/32"
Hand Pull
•Minimum box width is 9"•Hand pull is 5-1/4" wide and 11/16"
deep, centered on front of drawer box
Back
Front
Eased Edges1/16" Radius
Eased Edges 1/16" Radius
Front
3" or 4"2"
10.4
INT
ER
IOR
ST
OR
AG
EC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Winter 2013
Keyboard Tray Option
• Minimum box width 12"• Minimum box height 2"• Maximum box height 3-1/8"
Dovetail Drawer Box Options (continued)
Eased Edges1/16" Radius
Blum TANDEM Clip Options
•Pre-drilling and installation options are for Blum TANDEM drawer hardware.• Minimum box width 5-1/2" • 1/2" reveal only•Undermount notching with hook hole boring are not standard and must be specified.
Blum TANDEM Clips Pre-drilled Blum TANDEM Clips Installed
• Clips feature side-to-side, height and depth adjustment for fine tuning drawer front alignment.
Eased Edges1/16" Radius
Front and BackFront Only
Blum part number TSI.190.01
10.4A
INT
ER
IOR
ST
OR
AG
EC
ustom
Pro
ducts
Winter 2014 Conestoga Wood Specialties Corporation
ORGA-LINE for Tandem Drawers
•ORGA-LINEdrawerinsertsaredesignedtoprovidereconfigurabledrawerstorageandorganizationsolutions.
• Designedtofit21"deep(24"deepcabinets)wooden563SeriesTandemsizeddrawers.Drawerorganizersarespringloadedtoensuretheystaysecurewithinthedrawer.
• Fouruniquedesignsincorporatestainlesssteelandnylontraysanddividers.•AllORGA-LINEaccessoriescarryBlum’slifetimewarranty.
•Minimumexteriordrawerboxwidthis12-7/16"•Minimumdrawerboxheightis4"•Fiveadjustable/removabletrays:
3-7/16"Wx10-1/2"Dx2-3/8"H•Traysanddividersaredishwashersafeupto170˚
•Minimumexteriordrawerboxwidthis16-1/4"•Minimumdrawerboxheightis4"• Inadditiontofiveadjustable/removable10-1/2"trays,
aspringloadedlateraldividerisincluded.•Traysanddividersaredishwashersafeupto170˚
•Minimumexteriordrawerboxwidthis13-1/8"•Minimumdrawerboxheightis4"•Unitincludesone10-1/4"tray,two7"trays,two3-7/16"
traysandmultiplelateraldividers.Alltraysanddividersareadjustableandremovable.
•Traysanddividersaredishwashersafeupto170˚
•Minimumexteriordrawerboxwidthis12-1/16"•Minimumdrawerboxheightis4"•Adjustable/reconfigurablehorizontalandverticaldivider
components
11-3/16"
15"
11-7/8"
11-9/16"
Part No. Description
2100812 ORGA-LINEDesignA
Part No. Description
2100813 ORGA-LINEDesignB
Part No. Description
2100814 ORGA-LINEDesignC
Part No. Description
2100815 ORGA-LINEDesignD
10.4B
INT
ER
IOR
ST
OR
AG
EC
usto
m P
rod
ucts
Conestoga Wood Specialties Corporation Winter 2014
Back Recessed Option
• Minimumdrawerboxwidthis12"• MustspecifyA,BandCdimensions
Dovetail Drawer Box Options
A B
C
•Minimumdrawerboxdepthis7".Overallheightis6-3/4".•Adjuststoholdplates7-1/16"x12-5/8"•Non-sliprubberfeet•Dishwashersafeupto170˚•Adjustableplateholdersmadefromstainlesssteelandnylon.
Stackdishesandbowlsandservesasacaddyfromdrawertotable.
ORGA-LINE for Tandem Drawers (continued)
Part No. Description
2100816 ORGA-LINEPlateHolder
